Material properties

Material properties, Total:277 items.

The international standard classification for "Material properties" includes: Manufacturing forming processes , Reinforced plastics , Ventilation and air-conditioning systems , Biology. Botany. Zoology , Piezoelectric and dielectric devices , Raw materials , Plastics in general , Thermal and sound insulating materials , Home textiles. Linen , Inorganic chemicals in general , Ceramic and glass insulating materials , Advanced ceramics , Magnetic components , Medical materials , Equipment for the chemical industry , Continuous handling equipment in general , Ignitability and burning behaviour of materials and products .

The Chinese standard classification for "Material properties" includes: Casting , Fibre reinforced composites , Special electronic technology material , Basic Subject in general , Building sanitary ceramics , Basic standards and general methods for synthetic resin and plastic , Heat insulation, sound absorption, light fireproof material , Byproducts and comprehensive utilization of furs , Inorganic chemicals in general , Electrical insulating material and its products , Special ceramics , Magnetic component , Medical sanitary products , Non-metal chemical machinery equipment , Insulator , Conveying machinery , Vehicle body (cab) and accessories , Fire-fighting in general .

Professional Standard - Aviation

HB 5351.1-2004 Test method for properties of investment casting slurry -- Part 1: Determination of viscosity
HB 5350.2-2004 Test method for properties of investment casting pattern materials -- Part 2: Determination of thermal deformation and thermal stability
HB 5350.5-2004 Test method for properties of investment casting pattern materials -- Part 5: Determination of ash content
HB 5350.7-2004 Test method for properties of investment casting pattern materials -- Part 7: Determination of wetting angle between pattern and binder
HB 5350.6-2004 Test method for properties of investment casting pattern materials -- Part 6: Determination of viscosity
HB 20078-2011 General requirements for properties data of resin matrix composites for aerocraft
HB 5350.4-2004 Test method for properties of investment casting pattern materials -- Part 4: Determination of surface hardness
HB 5350.1-2004 Test method for properties of investment casting pattern materials -- Part 1: Determination of linear shrinkage
HB 5350.3-2004 Test method for properties of investment casting pattern materials -- Part 3: Determination of bending strength

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 32788.4-2016 Test method for properties of prepreg―Part 4:Determination of tensile strength
GB/T 3389-2008 Test methods for the properties of piezoelectric ceramics - Test for the performance parameter
GB/T 3389.7-1986 Test methods for the properties of piezoelectric ceramics--Test for dielectric properties in high electric field
GB/T 23764-2009 Test method of photocatalytic materials for self-cleaning
GB/T 6166-1985 Methods for testing the performance of high efficiency filter media--Penetration and resistance
GB/T 23761-2009 Test method of photocatalytic materials for air purification
GB/T 3389.5-1995 Test methods for the properties of piezoelectric ceramics--Thickness extension vibration mode for disk
GB/T 40268-2021 Determination of performance on immunomagnetic material
GB/T 15750-2008 Test methods for the properties of piezoelectric ceramics - Test for the ageing properties
GB 11320-1989 Piezoelectric Ceramic Material Properties Test Method for Low Mechanical Quality Factor Piezoelectric Ceramic Material Properties
GB/T 11320-1989 Test methods for the properties of piezoelectric ceramics material with the low mechanical quality factor
GB/T 1446-1983 The generals of test methods for properties of fiber-reinforced plastics
GB/T 1446-2005 Fiber-reinforced plastics composites?The generals
GB/T 30809-2014 UV light sources for testing properties of photocatalytic materials
GB/T 8411.3-2009 Ceramic and glass insulating materials - Part 3: Specifications for individual materials
GB/T 44139.2-2024 Requirements for sleeping bags—Part 2: Raw material properties
GB/T 9633-1988 Measuring methods for properties of gyromagnetic materials intended for application at microwave frequencies
GB/T 1041-2008 Plastics - Detemination of compressive properties
GB/T 1447-2005 Fiber-reinforced plastics composites-Determination of tensile properties
GB/T 38985-2020 The character requirements for ceramic liquid pigments
GB/T 9633-2012 Measuring methods for properties of gyromagnetic materials intended for application at microwave frequencies
GB/T 17369-2014 Thermal insulation for building applications—Guidelines for selecting properties

Professional Standard - Navy

HJB 285-2003 Performance specification for naval coatings

Taiwan Provincial Standard of the People's Republic of China

CNS 10318-1983 Method of Test for Fundamental Properties of Soft Ferrites
CNS 9453-1987 Glossary of Terms Used in Building Materials for Performing Uses

Professional Standard - Medicine

YY/T 1477.1-2016 Standard test models for primary wound dressing performance evaluation—Part 1:In vitro wound model for antimicrobial activity evaluation
YY/T 1477.3-2016 Standard test models for primary wound dressing performance evaluation―Part 3:In vitro wound model for fluid handling properties evaluation
YY/T 1477.4-2017 Standard test models for primary wound dressing performance evaluation-Part 4:In vitro wound model for adhesion properties evaluation of dressings
YY 0854.2-2011 Performance requirements for pure cotton nonwoven surgical compresses—Part 2:Finished compress
YY/T 1477.2-2016 Standard test models for primary wound dressing performance evaluation―Part 2:Animal burn model for wound healing evaluation

Group Standards of the People's Republic of China

T/CS 013-2024 Technical specification for performance testing of building waterproof materials
T/GDTL 016-2022 Cement mortar block for testing of architectural coatings performance
T/CEC 310.1～310.4-2020 Graded evaluation of performance of grounding materials used in power engineering
T/HBAS 008-2022 Test method for properties of printing pastes
T/CPIA 0060-2024 Technical specifications for performance evaluation of cast monocrystalline silicon materials
T/GDTL 017-2022 Non-asbetos fiber cement flat sheets for testing of architectural coatings performance
T/CSMT-DZ005-2023 Performance testing method of quantum dot materials for display
T/CNCIA 01035-2024 Charts for testing of coatings performance
T/CIET 952-2024 Ceramic Matrix Composite Materials Performance Testing Specifications
T/CIET 1167-2025 Performance evaluation method of antifouling coating materials for offshore equipment

未注明发布机构

ASABE S615.1-2013 Cotton Module Cover Material Performance
AAMA 800-2016 Voluntary Specifications and Test Methods for Sealants
MMPDS-16-2021 Metallic Materials Properties Development and Standardization Manual (MMPDS)
DVS 2205-1 Beiblatt 1:2011-11 Guide to Calculating Polyethylene (PE) Pipe Material Properties
MMPDS-14 -2019 Metallic Materials Performance Development and Standardization (MMPDS-14)
DNV-CP-0139-2021 Protective coating systems for cargo oil tanks - Non-metallic materials
ASABE S615.3-2024 Cotton Module Cover Material Performance
AMPP Paper 17917-2022 Impact of material properties on the performance of thick-wall X65 TMCP plate steel for sour service

Professional Standard - Electron

SJ/T 11512-2015 Test methods of electronic pastes for integrated circuit performent
SJ 20746-1999 Test method for the properties of liquid crystal materials
SJ 20634-1997 Test methods for electronic pastes performance

Professional Standard - Chemical Industry

HG/T 3210-2002 Methods of test for the performance of acid resistant ceramic material

Professional Standard - Machinery

JB/T 12607-2016 Inspection methods for performance parameters of superhard tools material
JB/T 12613-2016 Inspection methods for perforance parameters of ceraic tools material
JB/T 5890-1991 Performance and Test Method of Glass Materials for Insulators
JB 5890-1991 Properties and testing methods of glass materials for insulators
JB/T 12612-2016 Inspection methods for cutting tool coating material performance
JB/T 9014.1-1999 Continuous handling equipment - Loose bulk material - Terms and classificatiom for performance

Professional Standard - Automobile

QC/T 56-1993 Performance test method for liner material of automotive seats
QC/T 236-1997 Test method for material performance of automotive interior decorations
QC/T 236-2019 Test method for automotive interior decorative material properties

Ministry of Emergency Management of the People's Republic of china

XF 495-2004 Specification of flame-retardant floor-covering

Professional Standard - Aerospace

QJ 1132-1987 Specifications for performance of metal materials for spacecraft, performance specifications for structural aluminum alloys

Professional Standard - Public Safety Standards

GA 495-2004 Specification of flame-retardant floor-covering
GA 110-1995 Test method for performance of fireproof spraying materials for building components

Fujian Provincial Standard of the People's Republic of China

DB35/T 2067-2022 Rules for evaluating the performance of solid waste fuel for boilers

American Society for Testing and Materials (ASTM)

ASTM STP 445-1969 Material properties and deep sea
ASTM STP 95-1949 Effects of radiation on material properties
ASTM STP 956-1987 Effects of radiation on material properties
ASTM F2100-19e1 Standard Specification for Performance of Materials Used in Medical Face Masks
ASTM STP 1076-1990 Microstructure and performance of geosynthetics
ASTM F2100-21 Standard Specification for Performance of Materials Used in Medical Face Masks
ASTM F2100-03a Standard Specification for Performance of Materials Used in Medical Face Masks
ASTM F2100-03 Standard Specification for Performance of Materials Used in Medical Face Masks
ASTM D7265-12 Standard Specification for Hydrogen Thermophysical Property Tables
ASTM F2100-19 Standard Specification for Performance of Materials Used in Medical Face Masks
ASTM STP 107-1950 Microstructure and performance of geosynthetics
ASTM F2100-25 Standard Specification for Performance of Materials Used in Medical Face Masks
ASTM D7265-06 Standard Specification for Hydrogen Thermophysical Property Tables
ASTM F2100-20 Standard Specification for Performance of Materials Used in Medical Face Masks
ASTM F2100-23 Standard Specification for Performance of Materials Used in Medical Face Masks
ASTM STP 1069-1990 Building sealants: materials, properties and performance
ASTM F2100-11 Standard Specification for Performance of Materials Used in Medical Face Masks
ASTM F2100-11(2018) Standard Specification for Performance of Materials Used in Medical Face Masks
ASTM F2100-04 Standard Specification for Performance of Materials Used in Medical Face Masks
ASTM STP 188-1956 Seminar on Minimum Electrical Insulation Material Property Values
ASTM STP 304-1962 The main effects of major impurities on material properties
ASTM F2100-07 Standard Specification for Performance of Materials Used in Medical Face Masks
ASTM F2100-02 Standard Specification for Performance of Materials Used in Medical Face Masks
ASTM D5870-95 Standard Practice for Calculating Property Retention Index of Plastics
ASTM STP 226-1958 Elevated-Temperature Properties of Weld-Deposited Metal and Weldments
ASTM STP 1265-1995 Engineering properties and their relationship to asphalt mixture performance
ASTM D5870-22 Standard Practice for Calculating Property Retention Index of Plastics
ASTM STP 1147-1992 Effect of effect mineral fillers and aggregates on the performance of asphalt mixtures
ASTM E136-12 Standard Test Method for Behavior of Materials in a Vertical Tube Furnace at 750deg;C
ASTM C899-79(2018) Standard Practice for Use of Metric Units of Measure for Reporting Properties of Refractory Materials
ASTM D1037-06a Standard Test Methods for Evaluating Properties of Wood-Base Fiber and Particle Panel Materials
ASTM C899-79(2022) Standard Practice for Use of Metric Units of Measure for Reporting Properties of Refractory Materials

German Institute for Standardization

DIN 17471:1983 Resistance alloys
DIN 7740-1 Beiblatt:1969 Properties of polyethylene molding compound performance test specimens
DIN 17869:1992 Material properties of titanium and titanium alloys; additional data
DIN 17869:1992-06 Material properties of titanium and titanium alloys; additional data
DIN EN 1149-5:2018-11 Protective clothing - Electrostatic properties - Part 5: Material performance and design requirements; German version EN 1149-5:2018
DIN 30720:1990-11 Containers for multi-bucket system vehicles; sizes, materials, performance
DIN EN 1149-5:2008 Protective clothing - Electrostatic properties - Part 5: Material performance and design requirements; English version of DIN EN 1149-5:2008-04
DIN EN 1149-5 E:2016 Draft Document - Protective clothing - Electrostatic properties - Part 5: Material performance and design requirements; German and English version prEN 1149-5:2016
DIN EN 1149-5 E:2016-12 Protective clothing - Electrostatic properties - Part 5: Material performance and design requirements
DIN EN 60556:2017-02 Gyromagnetic materials intended for application at microwave frequencies - Measuring methods for properties (IEC 60556:2006 + A1:2016); German version EN 60556:2006 + A1:2016 / Note: DIN EN 60556 (2007-01) remains valid alongside this standard until 20...

CZ-CSN

CSN 67 3051-1956 Coating performance in application
CSN 80 3002-1976 Cotton fabrios. Utility properties

Canadian Standards Association (CSA)

CAN/CSA-C22.2 No.0.17-2000(R2013) Evaluation of Properties of Polymeric Materials
CAN/CSA-C22.2 NO.0.17-2000(R2018) Evaluation of properties of polymeric materials
CAN/CSA-C22.2 No.0.17-1992 Evaluation of Properties of Polymeric Materials
CSA C22.2 No.0.17-2022 Evaluation of the properties of polymer materials
CAN/CSA-C22.2 No.0.17-2000(C2013) Evaluation of the properties of polymer materials
CSA C22.2 No.0.17-1992 Evaluation of Properties of Polymeric Materials
CAN/CSA C22.2 No.0.17-2022 Evaluation of Properties of Polymeric Materials

Korean Agency for Technology and Standards (KATS)

KS F 2389-2014 Performance grade for asphalt binder
KS F 2389-2019 Performance grade for asphalt binder
KS R 9195-2009 Insulating materials of insulated rail joint－Test methods
KS M ISO TR 20879:2008 Footwear-Performance requirements for components for footwear-Uppers
KS R 1082-2003 Test code of padding material for automobile seats
KS M ISO 9774-2012(2017) Thermal insulation for building applications－Guidelines for selecting properties
KS M ISO 9774-2012(2022) Thermal insulation for building applications－Guidelines for selecting properties
KS M ISO TR 20880:2008 Footwear－Performance requirements for components for footwear－Outsoles
KS M ISO TR 20881:2008 Footwear-Performance requirements for components for footwear-Insoles
KS F 2389-2004 Specification for performance graded asphalt binder
KS R 0080-2023 Material property test method of friction material for automobile brake
KS L 1672-2023 Specimen preparation for the performance test of slurry-type photocatalytic materials
KS M ISO TR 20882:2008 Footwear－Performance requirements for components for footwear－Lining and insocks
KS M ISO 4899-2022 Tixtile－glass－reinforced thermosetting plastics－Properties and test methods
KS M ISO 4899-2002(2017) Tixtile－glass－reinforced thermosetting plastics－Properties and test methods
KS M ISO 4899-2002(2022) Tixtile－glass－reinforced thermosetting plastics－Properties and test methods
KS M ISO 1622-2:2008 Plastics－Polystyrene(PS) moulding and extrusion materials－Part 2：Preparation of test specimens and determination of properties
KS F 2821-2018(2023) Standard test method for change in properties of plastic building materials resulting from weathering resistence
KS R 1115-2023 Performance test method for brake friction material of passenger cars using dynamometer
KS M ISO 4899:2002 Tixtile－glass－reinforced thermosetting plastics－Properties and test methods

Society of Automotive Engineers (SAE)

SAE J2968/1_202209 Measurement of Material Properties for Wet Friction Materials
SAE J2968/1-2022 Measurement of Material Properties for Wet Friction Materials
SAE J2983_201910 Recommended Practice for Determining Material Properties of Li-Battery Separator
SAE J2983_201212 Recommended Practice for Determining Material Properties of Li-Battery Separator
SAE AIR7484 Guidance on the Impact of Fuel Properties on Fuel System Design and Operation
SAE J2983-2019 Recommended Practice for Determining Material Properties of Li-Battery Separator
SAE J2983-2012 Recommended Practice for Determining Material Properties of Li-Battery Separator
SAE J2265-1995 Diesel Engines Diesel Fuel Performance Requirement and Test method for Assessing Fuel Lubricity

American Society of Mechanical Engineers (ASME)

ASME PTC 3.3-1969(R1979) Gaseous fuel performance test code
ASME PTC 32.2 Report 1978 Methods for measuring the properties of nuclear fuel in light water reactors
ASME PTC 32.2 Report-1978 Methods of measuring the performance of nuclear reactor fuel in light water reactors

PL-PKN

PN P84676-1991 Hand protections. Performance requirements for materials
PN-EN 1149-5-2018-10 P Protective clothing -- Electrostatic properties -- Part 5: Material performance and design requirements

British Standards Institution (BSI)

BS EN ISO 15023-2:2003 Plastics - Poly(vinyl alcohol) (PVAL) materials - Determination of properties
BS EN ISO 15023-2:2006 Plastics. Poly(vinyl alcohol) (PVAL) materials-Determination of properties
BS ISO 15023-2:2003 Plastics. Poly(vinyl alcohol) (PVAL) materials. Determination of properties
BS EN ISO 23537-2:2016 Requirements for sleeping bags. Fabric and material properties
BS EN 1149-5:2008 Protective clothing — Electrostatic properties — Part 5: Material performance and design requirements
BS EN 1149-5:2018 Protective clothing. Electrostatic properties. Material performance and design requirements
BS PD CEN/TR 16884:2016 Automotive fuels. Diesel fuel. Cold operability testing and fuel performance correlation
PD CEN/TR 16884:2016 Automotive fuels - Diesel fuel - Cold operability testing and fuel performance correlation
BS EN ISO 19712-2:2013 Plastics - Decorative solid surfacing materials - Determination of properties - Sheet goods
BS 6432:1984 Methods for determining properties of glass fibre reinforced cement material
BS PD ISO/TR 10809-1:2009 Cast irons-Materials and properties for design
BS 7539:1992 Methods for test for determination of properties of cushioning materials for package design purposes
BS ISO 12136:2011 Reaction to fire tests. Measurement of material properties using a fire propagation apparatus
BS 3120:1959 Specification for performance requirements of flameproof materials for clothing and other purposes
BS EN 13813:2002 Screed material and floor screeds - Screed material - Properties and requirements
BS EN 1436:1998 Road marking materials - Road marking performance for road users
BS EN 60556:2006+A1:2016 Gyromagnetic materials intended for application at microwave frequencies. Measuring methods for properties
BS 7539:1992(1999) Methods for test for Determination of properties of cushioning materials for package design purposes

International Organization for Standardization (ISO)

ISO/TR 20879:2007 Footwear - Performance requirements for components for footwear - Uppers
ISO/TR 20572:2007 Footwear - Performance requirements for components for footwear - Accessories
ISO/TR 20883:2007 Footwear - Performance requirements for components for footwear - Shanks
ISO/TR 20881:2007 Footwear - Performance requirements for components for footwear - Insoles
ISO/TR 20880:2007 Footwear - Performance requirements for components for footwear - Outsoles
ISO/TR 20882:2007 Footwear - Performance requirements for components for footwear - Lining and insocks
ISO 10329:2009 Coal - Determination of plastic properties - Constant-torque Gieseler plastometer method
ISO/TR 22648:2007 Footwear - Performance requirements for components for footwear - Stiffeners and toepuffs
ISO 12136:2011 Reaction to fire tests - Measurement of material properties using a fire propagation apparatus
ISO 4899:1993 Textile-glass reinforced thermosetting plastics; properties and test methods

Association Francaise de Normalisation

NF T70-702:1995 Matériaux énergétiques de défense - Performances - Terminologie - Essais balistiques.
NF T70-712:2013 Energetic materials for defense - Performances - Measurement of immersed high explosives
NF T70-714:2004 Energetic materials for defense - Performance - Burning in closed vessel
CEN/TR 16884:2016 Automotive fuels - Diesel fuel - Cold operability testing and fuel performance correlation
NF D90-224-2*NF EN ISO 23537-2:2017 Requirements for sleeping bags - Part 2 : fabric and material properties
NF EN 1149-5:2018 Protective clothing - Electrostatic properties - Part 5: material performance and design requirements
NF T70-700:1995 Energetic materials for defense. Performances. Detonation velocity of high explosives.
NF S74-532-5:2008 Protective clothing - Electrostatic properties - Part 5 : material performance and design requirements.
NF T70-712:2003 Energetic materials for defense - Performances - Measurement of immersed high explosives
NF T70-713:2003 Energetic materials for defense - Performances - Ballistic performance of explosives - Symmetrical plane test.
NF B38-002*NF ISO 4899:1995 Textile-glass-reinforced thermosetting plastics. Properties and test methods.
NF C93-376/A1*NF EN 60556/A1:2016 Gyromagnetic materials intended for application at microwave frequencies - Measuring methods for properties
NF M15-009:1976 Liquid mineral fuels. Properties of light fuel oil.
NF C93-376*NF EN 60556:2006 Gyromagnetic materials intended for application at microwave frequencies - Measuring methods for properties

SE-SIS

SIS 65 00 82-1966 Texliles. Dtterminatinn oj flameproofness uf fabrirs.
SIS 83 90 30-1971 Furniture and fittings for housing. Material properties and workmanship, wood

International Federation of Trucks and Engines

NAVISTAR MPAPS P-9565-2014 Truck Door Trim Material, Performance, and Durability Requirements

ACI - American Concrete Institute

ACI 439.4R-2009 Report on Steel Reinforcement-Material Properties and U.S. Availability

Standard Association of Australia （SAA）

AS K111:1959 Exterior oil gloss paint for general use (performance basis)
AS 3730.20:1993 Guide to the properties of paints for buildings, Part 20: Latex - Roofing paint
AS 3730.1:1992 Guide to the properties of paints for buildings, Part 1: Latex - Interior - Flat

GM North America

GM GM4388M-2001 Exterior Paint Performance Requirements for Approval of New Plastic Materials

National Association of Corrosion Engineers (NACE)

NACE Paper 14722-2020 Oil & Gas Flow Line Material Performance and Challenges
NACE Paper 13294-2019 Oil and Gas Production Well Material Performance Challenges
NACE Paper 08923-2017 Effect of Microstructure on The Corrosion Resistance of Duplex Stainless Steels: Materials Performance Maps
NACE Paper 07448-2016 Effects of coating parameters on properties of electrodeposited acrylic coatings

American National Standards Institute （ANSI)

ANSI/ESD STM11.31-1994 Evaluating the Performance of Electrostatic Discharge Shielding Materials: Bags
ANSI/ESD STM11.31-2006 For evaluation the performance of electrostatic discharge shielding materials - Bags
ANSI/AWS B2.4:2012 Specification for Welding Procedure and Performance Qualification for Thermoplastics

Gosstandart of Russia

GOST 32561-2013 Hard coal. Determination of plastic properties. Gieseler plastometer method
GOST R 54247-2010 Hard coal. Determination of plastic properties by Gieseler plastometer method

(U.S.) Ford Automotive Standards

FORD FLTM BB 101-19-2001 OIL AND FUEL RESISTANCE OF AUTOMOTIVE ELECTRICAL CABLE
FORD WD953-2001 MATERIAL AND PERFORMANCE OF SCREWS FOR USE IN PLASTICS
FORD WL900-2005 MATERIAL AND PERFORMANCE REQUIREMENTS OF RETAINER RINGS
FORD WSS-M2P188-A1-2011 PAINT PERFORMANCE, PLASTIC SUBSTRATES, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***

International Truck and Engine Corporation (ITEC)

INTERN CEMS GT-4H-2009 Properties Of Catalyzed Paint

GCC Standardization Organization

GSO ASTM F2100:2022 Standard Specification for Performance of Materials Used in Medical Face Masks
GSO EN 1149-5:2010 Protective Clothing - Electrostatic Properties - Part 5: Material Performance and Design Requirements
GSO ISO 4899:2013 Textile-glass-reinforced thermosetting plastics - Properties and test methods

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO ASTM F2100:2023 Standard Specification for Performance of Materials Used in Medical Face Masks
BH GSO EN 1149-5:2011 Protective Clothing - Electrostatic Properties - Part 5: Material Performance and Design Requirements

South African Bureau of Standard

SANS 737:2009 Coal - Determination of plastic properties - Constant-torque Gieseler plastometer method

Standards Norway

SN-CEN/TR 16884:2016 Automotive fuels — Diesel fuel — Cold operability testing and fuel performance correlation
NS-EN 1149-5:2008 Protective clothing — Electrostatic properties — Part 5: Material performance and design requirements
NS-EN 1149-5:2018 Protective clothing — Electrostatic properties — Part 5: Material performance and design requirements
NS-EN 1367-7:2014 Tests for thermal and weathering properties of aggregates — Part 7: Determination of resistance to freezing and thawing of Lightweight aggregates

Association of German Mechanical Engineers

VDI 2020-1972 Plastic materials; preparation of material performance sheets and hints for their application

Spanish Association for Standardization (UNE)

UNE-CEN/TR 16884:2016 Automotive fuels - Diesel fuel - Cold operability testing and fuel performance correlation (Endorsed by AENOR in May of 2016.)
UNE 32321:1995 HARD COAL. DETERMINATION OF PLASTIC PROPERTIES BY THE CONSTANT TORQUE GIESELER PLASTOMETER.
UNE-EN 1149-5:2018 Protective clothing - Electrostatic properties - Part 5: Material performance and design requirements (Endorsed by Asociación Española de Normalización in November of 2018.)
UNE-EN 1149-5:2008 Protective clothing - Electrostatic properties - Part 5: Material performance and design requirements
UNE-EN 60556:2006 Gyromagnetic materials intended for application at microwave frequencies - Measuring methods for properties
UNE-EN 60556:2006/A1:2016 Gyromagnetic materials intended for application at microwave frequencies - Measuring methods for properties (Endorsed by AENOR in July of 2016.)

Danish Standards Foundation

DANSK DS/CEN/TR 16884:2016 Automotive fuels - Diesel fuel - Cold operability testing and fuel performance correlation
DANSK DS/EN 1149-5:2018 Protective clothing – Electrostatic properties – Part 5: Material performance and design requirements
DS/EN 1149-5:2008 Protective clothing - Electrostatic properties - Part 5: Material performance and design requirements
DANSK DS/EN 60556:2006 Gyromagnetic materials intended for application at microwave frequencies - Measuring methods for properties

European Committee for Standardization (CEN)

EN 13813:2002 Screed material and floor screeds - Screed material - Properties and requirements
EN 1149-5:2008 Protective clothing - Electrostatic properties - Part 5: Material performance and design requirements
EN ISO 178:2019 Plastics - Determination of flexural properties (ISO 178:2019)
EN ISO 178:1996 Plastics - Determination of Flexural Properties ISO 178: 1993
EN ISO 178:2010 Plastics - Determination of flexural properties (ISO 178:2010)
CEN EN 1149-5-2008_ Protective clothing — Electrostatic properties — Part 5: Material performance and design requirements

U.S. Military Regulations and Norms

ARMY MIL-HDBK-797-1994 POLYAMIDE (NYLON) PLASTICS: PROPERTIES, PROCESSING, PERFORMANCE, AND MILITARY APPLICATIONS
ARMY MIL-HDBK-17-2 F-2002 COMPOSITE MATERIALS HANDBOOK VOLUME 2. POLYMER MATRIX COMPOSITES MATERIALS PROPERTIES

Ente Nazionale Italiano di Unificazione

UNI EN 1149-5:2018 Protective clothing - Electrostatic properties - Part 5: Material performance and design requirements
UNI EN 13813:2004 Screed material and floor screeds - Screed material - Properties and requirements.
UNI 11122:2004 Materials for vertical signs - Performance of retroreflective microprismatic materials for vertical signs

Lithuanian Standards Office

LST EN 1149-5-2008 Protective clothing - Electrostatic properties - Part 5: Material performance and design requirements

The Directorate General of Specifications and Metrology (DGSM)

OS GSO EN 1149-5:2010 Protective Clothing - Electrostatic Properties - Part 5: Material Performance and Design Requirements
OS GSO ISO 4899:2013 Textile-glass-reinforced thermosetting plastics - Properties and test methods
OS GSO IEC 60556:2014 Gyromagnetic materials intended for application at microwave frequencies - Measuring methods for properties

US-FCR

FCR COE REMR-CS-47 FINAL REPORT-1995 PERFORMANCE CRITERIA FOR CONCRETE REPAIR MATERIALS, PHASE I

ISUZU - Isuzu Motors Ltd.

ISC-B51-003A-2015 Performance of exterior plastic parts coatings
ISC-B51-003-2008 Performance of exterior plastic parts coatings
ISC-C93-005-2009 Performance requirements of acoustic material: resin felt fiber/polyester nonwoven fabric (Japanese/English Version; ISUZU RESTRICTED/CONFIDENTIAL STANDARD

Swedish Institute for Standards

SS-EN 1149-5:2018 Protective clothing - Electrostatic properties - Part 5: Material performance and design requirements
SS-EN 60556:2006 Gyromagnetic materials intended for application at microwave frequencies - Measuring methods for properties

CEN - European Committee for Standardization

EN 1149-5:2018 Protective clothing - Electrostatic properties - Part 5: Material performance and design requirements

The Society for Protective Coatings (SSPC)

SSPC Guide 6-2021 SSPC-Guide 6-2021

BR-ABNT

ABNT NBR 15382-2006 Architectural Coatings - Methods for Determination of Properties of Non-Industrial Architectural Coatings - Specific Gravity

Canadian General Standards Board （CGSB)

CAN2-12.12-M76-1976 Performance of Plastic Safety Glazing Material

International Association of Plumbing and Mechanical Officials

IAPMO IGC 149-99(2013) Guide Criteria for Performance of Engineering Thermoplastics Materials (Injection Molding and Extrusion Grades) Suitable for Kitchen and Bath Applications (Type I and III Materials Only)

VN-TCVN

TCVN 6693-2000 Protective clothing.Determination of behaviour of materials on impact of small splashes of molten metal

Bureau of Indian Standards

IS/IEC 60556-2016 Gyromagnetic Materials Intended For Application At Microwave Frequencies Measuring Methods For Properties

US-AAMA

AAMA 505-1998 Dry Shrinkage And Composite Performance Thermal Cycling Test Procedure

SG-SPRING SG

SS 381-1996 Materials And Performance Tests For Aluminium Curtain Walls

TH-TISI

TIS 1223-1994 Standard test method for effect of heat and air on properties of bituminous materials

International Electrotechnical Commission (IEC)

IEC 60556:1982 Measuring methods for properties of gyromagnetic materials intended for application at microwave frequencies
IEC 60556:2006 Gyromagnetic materials intended for application at microwave frequencies - Measuring methods for properties