Analytical Test Equipment

Analytical Test Equipment, Total:308 items.

The international standard classification for "Analytical Test Equipment" includes: Electromagnetic compatibility(EMC) , Measurement of electrical and magnetic quantities , Metalliferous minerals , Implants for surgery, prosthetics and orthotics , Exploratory and extraction equipment .

The Chinese standard classification for "Analytical Test Equipment" includes: Electromagnetic compatibility , Electric energy measurement and load control system , Iron ore , Extracorporeal circulation, artificial organ and prosthesis device , Petroleum drilling & production equipment and instrument .

工业和信息化部

YD/T 3993-2021 Test methods of Primary Reference T ime Clock (PRTC) equ i pment
YD/T 3914-2021 Test methods for VxLAN in access network

Group Standards of the People's Republic of China

T/QGCML 4425-2024 Intelligent analysis equipment for monitoring information
T/QGCML 4072-2024 IT equipment operating status monitoring and analysis system
T/WAPIA 037.2-2021 Testing of wireless local area network—Part 2: Specification for equipment testing
T/QGCML 3373-2024 Equipment production process data analysis software

Professional Standard - Post and Telecommunication

YD/T 3236-2017 Testing method for service-aware and controlling technology of broadband network access server
YD/T 1156-2009 Router test specification.Core router

Professional Standard - Commodity Inspection

SN/T 4239-2015 Management requirements for large equipment of chemical analysis in laboratory

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 17215.211-2006 Electricity metering equipment (AC)—General requirements, tests and test conditions— Part 11: Metering equipment
GB/T 38659.3-2022 Electromagnetic compatibility—Risk assessment—Part 3：Risk analysis method for device
GB 6730.1-1986 Methods for chemical analysis of iron ores; Preparation of predried test samples for chemical analysis

Professional Standard - Medicine

YY 0054-2010 Haemodialysis equipment

国家药监局

YY 0054-2023 Haemodialysis equipment

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 17215.211-2021 Electricity metering equipment(AC)—General requirements, tests and test conditions—Part 11：Metering equipment

Professional Standard - Petroleum

SY/T 5079-2014 Logging and testing equipment
SY/T 5079-2008 Logging and testing equipment
SY/T 6232-1996 Classification of experimental equipment for petroleum core analysis
SY 5079-2014 Oil Well Testing Equipment

Military Standard of the People's Republic of China-General Armament Department

GJB 6860-2009 General specification for automatic test equipments of land-based cruise missile

United States Navy

NAVY MIL-STD-2218-1992 THERMAL DESIGN, ANALYSIS, AND TEST PROCEDURES FOR AIRBORNE ELECTRONIC EQUIPMENT
NAVY DOD-STD-1678 NOTICE 1-1984 FIBER OPTICS TEST METHODS AND INSTRUMENTATION
NAVY UFGS-26 08 00-2008 APPARATUS INSPECTION AND TESTING

ESDU - Engineering Sciences Data Unit

TM 189-2018 Techmical Memorandum Analysis of Tests on a Convergent Nozzle in an Altitude Test Facility

Association Francaise de Normalisation

NF P18-566:2014 Granulats - Analyse granulométrique - Essai à l'aide d'un appareil d'ombroscopie
NF EN 15964:2011 Ethylotests, autres que les dispositifs à usage unique - Exigences et méthodes d'essai
NF EN ISO 15839:2006 Water quality - Direct water analysis equipment/sensors - Specifications and performance testing
NF EN 61181/A1:2012 Electrical equipment impregnated with mineral oil - Application of dissolved gas analysis (DGA) during factory testing of electrical equipment
NF T90-554:2007 Water quality - On-line sensors/analysing equipment for low turbidity measurement - Specifications and performance tests
NF C27-240/A1*NF EN 61181/A1:2012 Mineral oil-filled electrical equipment - Application of dissolved gas analysis (DGA) to factory tests on electrical equipment
NF X20-251:1982 Analysis of gases. Devices for the sampling of gases and their transfer to an analytical unit.
NF C64-471-101*NF EN IEC 62271-101:2021 High-voltage switchgear and controlgear - Part 101 : synthetic testing
NF T90-550*NF EN ISO 15839:2006 Water quality - On-line sensors/analysing equipment for water - Specifications and performance tests
NF X21-056*NF ISO 18116:2006 Surface chemical analysis - Guidelines for preparation and mounting of specimens for analysis
NF C44-052-11*NF EN 62052-11:2003 Electricity metering equipment (AC) - General requirements, tests and test conditions - Part 11 : metering equipment
NF C44-052-11/A1*NF EN 62052-11/A1:2017 Electricity metering equipment (a.c.) - General requirements, tests and test conditions - Part 11 : metering equipment
NF C64-471-101/A1*NF EN 62271-101/A1:2018 High-voltage switchgear and controlgear - Part 101 : synthetic testing
NF C41-106*NF EN 61180:2016 High-voltage test techniques for low-voltage equipment - Definitions, test and procedure requirements, test equipment

British Standards Institution (BSI)

BS EN ISO 15839:2006 Water quality. On-line sensors/analysing equipment for water. Specifications and performance tests
BS IEC 61745:1998 End-face image analysis procedure for the calibration of optical fibre geometry test sets
BS IEC 61745:1999 End-face image analysis procedure for the calibration of optical fibre geometry test sets
BS EN ISO 8589:2010+A1:2014 Sensory analysis. General guidance for the design of test rooms
BS EN 61181:2007 Mineral oil-filled electrical equipment - Application of dissolved gas analysis (DGA) to factory tests on electrical equipment
BS EN 61181:2007+A1:2012 Mineral oil-filled electrical equipment. Application of dissolved gas analysis (DGA) to factory tests on electrical equipment
PD ISO/TR 15155-2:2012 Agricultural irrigation equipment. Test facilities for agricultural irrigation equipment. Test facility operating manual
BS 4325-9:1992 Methods for analysis of oilseed residues. Preparation of test samples
BS EN ISO 15839:2004 Water quality - On-line sensors/analysing equipment for water - Specifications and performance tests
BS ISO 15839:2004 Water quality - On-line sensors/analysing equipment for water - Specifications and performance tests
BS EN ISO 8655-7:2006 Piston-operated volumetric apparatus. Non-gravimetric methods for the assessment of equipment performance
BS ISO 18116:2005 Surface chemical analysis - Guidelines for preparation and mounting of specimens for analysis
BS EN ISO 8655-7:2005 Piston-operated volumetric apparatus - Part 7: Non-gravimetric methods for the assessment of equipment performance
BS 5698-2:1989 Guide to pulse techniques and apparatus - Pulse measurement and analysis, general considerations
BS EN IEC 62271-101:2021(2022) High - voltage switchgear and controlgear Part 101 : Synthetic testing
BS 6376-1:1983 Reagents for chemical analysis. Methods of test

GSO

GSO ISO 15839:2013 Water quality -- On-line sensors/analysing equipment for water -- Specifications and performance tests
GSO OIML R126:2007 Evidential Breath Analyzers
OS GSO IEC 61181:2014 Mineral oil-filled electrical equipment - Application of dissolved gas analysis (DGA) to factory tests on electrical equipment
GSO IEC 61181:2014 Mineral oil-filled electrical equipment - Application of dissolved gas analysis (DGA) to factory tests on electrical equipment
GSO IEC 61180-2:2014 High-voltage test techniques for low-voltage equipment - Part 2: Test equipment
OS GSO IEC 60605-2:2014 Equipment reliability testing - Part 2: Design of test cycles
GSO IEC 60605-2:2014 Equipment reliability testing - Part 2: Design of test cycles
OS GSO ISO 8589:2011 Sensory analysis — General guidance for the design of test rooms
GSO ISO 8589:2011 Sensory analysis — General guidance for the design of test rooms
BH GSO IEC 60605-2:2016 Equipment reliability testing - Part 2: Design of test cycles
BH GSO IEC 62271-101:2012 High-voltage switchgear and controlgear - Part 101: Synthetic testing
BH GSO IEC 61180:2022 High-voltage test techniques for low-voltage equipment - Definitions, test and procedure requirements, test equipment
GSO IEC 61180:2021 High-voltage test techniques for low-voltage equipment - Definitions, test and procedure requirements, test equipment
GSO ISO 7764:2015 Iron ores -- Preparation of predried test samples for chemical analysis
BH GSO ISO 7764:2017 Iron ores -- Preparation of predried test samples for chemical analysis
OS GSO ISO 7764:2015 Iron ores -- Preparation of predried test samples for chemical analysis
OS GSO IEC 62271-101:2011 High-voltage switchgear and controlgear - Part 101: Synthetic testing

SCC

DANSK DS/EN ISO 15839:2006 Water quality - On-line sensors/analysing equipment for water - Specifications and performance tests
DIN 51893 E:2012 Draft Document - Gas analysis - Requirements for specifications of analysers/analytical equipment
DANSK DS/EN 61181:2008 Mineral oil-filled electrical equipment - Application of dissolved gas analysis (DGA) to factory tests on electrical equipment
VDI/VDE/DGQ/DKD 2622 BLATT 11:2003 Calibration of measuring instruments for electrical quantities — spectrum analyzers
DANSK DS/EN 61181/A1:2008 Mineral oil-filled electrical equipment - Application of dissolved gas analysis (DGA) to factory tests on electrical equipment
CEI EN 61181/A1:2008 Mineral oil-filled electrical equipment - Application of dissolved gas analysis (DGA) to factory tests on electrical equipment
CEI EN 61181:2008 Mineral oil-filled electrical equipment - Application of dissolved gas analysis (DGA) to factory tests on electrical equipment
AENOR UNE-EN ISO 15839:2007 Water quality - On-line sensors/analysing equipment for water - Specifications and performance tests (ISO 15839:2003)
NS-EN ISO 15839:2006 Water quality — On-line sensors/analysing equipment for water — Specifications and performance tests (ISO 15839:2003)
JIS T 1201-1:2020 Audiometric equipment -- Part 1: Equipment for pure-tone and speech audiometry
BS 7020-1:1988 Analysis of iron ores-Method for the preparation of pre-dried test samples for chemical analysis
CEI 56-18:2000 Equipment reliability testing - Part 2: Design of test cycles
DANSK DS/EN ISO 8589:2010 Sensory analysis - General guidance for the design of test rooms
DANSK DS/EN ISO 8589/A1:2010 Sensory analysis - General guidance for the design of test rooms
AENOR UNE-EN 62052-11/A1:2018 Electrical energy (AC) measurement equipment. General requirements, tests and test conditions. Part 11: Measurement equipment
AENOR UNE-EN 62052-11:2004 Electrical energy (AC) measurement equipment. General requirements, tests and test conditions. Part 11: Measurement equipment
BS ISO 8589:2007 Sensory analysis. General guidance for the design of test rooms
BS 4325-9:1984 Methods for analysis of oilseed residues-Preparation of test samples
DIN 54180-2 E:2016 Draft Document - Non-destructive testing - Shearography - Part 2: Equipment
VDI/VDE/DGQ 2618 BLATT 10.1:2001 Test equipment monitoring — Test instructions for micrometers
VDI/VDE/DGQ/DKD 2618 BLATT 11.1:2021 Test equipment monitoring — Test instructions for mechanical dial gauges
VDI/VDE/DGQ 2618 BLATT 11.1:2014 Test equipment monitoring — Test instructions for mechanical dial gauges
BS EN 61181:1993 Impregnated insulating materials. Application of dissolved gas analysis (DGA) to factory tests on electrical equipment
DIN EN 61181/A1 E:2011 Draft Document - Mineral oil-filled electrical equipment - Application of dissolved gas analysis (DGA) to factory tests on electrical equipment (IEC 10/838/CDV:2011); German version EN 61181:2007/FprA1:2011
ETSI TR 103 538-2019 Environmental Engineering (EE); Analysis of test method and test severity for mechanical test of equipment installed on poles/towers
VDI/VDE/DGQ 2618 BLATT 10.4:2008 Test equipment monitoring — Instructions for monitoring measuring equipment for geometrical dimensions — Test instructions for micrometer heads
VDI/VDE/DGQ 2618 BLATT 10.3:2002 Test equipment monitoring — Test instructions for precision micrometers
AENOR UNE-EN 62271-101:2013 High-voltage switchgear and controlgear - Part 101: Synthetic testing
DANSK DS/EN 62271-101:2013 High-voltage switchgear and controlgear – Part 101: Synthetic testing
BS ISO 15839:2003 Water quality. On-line sensors/analysing equipment for water. Specifications and performance tests
CEI EN 62271-101:2013 High-voltage switchgear and controlgear Part 101: Synthetic testing
DANSK DS/EN IEC 62271-101:2021 High-voltage switchgear and controlgear – Part 101: Synthetic testing
AENOR UNE-EN 60706-5:2011 Equipment maintainability. Part 5: Test facility and diagnostic tests.
VDI/VDE/DGQ 2618 BLATT 6.2:2014 Test equipment monitoring — test instructions for test plates
CEI EN 61180:2017 High-voltage test techniques for low voltage equipment - Definitions, test and procedure requirements, test equipment
DANSK DS/EN 62052-11/A1/AC:2018 Electricity metering equipment (AC) – General requirements, tests and test conditions – Part 11: Metering equipment
VDI/VDE/DGQ 2618 BLATT 11.4:2016 Test equipment monitoring — Test instructions for electronic digital dial gauges
BS 4289-1:1990 Methods for analysis of oilseeds-Preparation of test sample
CEI EN IEC 62271-101:2022 High-voltage switchgear and controlgear Part 101: Synthetic testing
CEI EN 62271-101/A1:2013 High-voltage switchgear and controlgear Part 101: Synthetic testing
DANSK DS/EN 62271-101/A1:2013 High-voltage switchgear and controlgear – Part 101: Synthetic testing
AENOR UNE-EN 61180:2017 High-voltage test techniques for low-voltage equipment - Definitions, test and procedure requirements, test equipment
DANSK DS/EN 61180:2016 High-voltage test techniques for low-voltage equipment – Definitions, test and procedure requirements, test equipment
VDI/VDE/DGQ/DKD 2618 BLATT 11.4:2020 Test equipment monitoring — Test instructions for electronic digital dial gauges

German Institute for Standardization

DIN EN ISO 15839:2007-02 Water quality - On-line sensors/analysing equipment for water - Specifications and performance tests (ISO 15839:2003); German version EN ISO 15839:2006
DIN 51893 E:2012-07 Gas analysis - Requirements for specifications of analysers/analytical equipment
DIN 51893:2013-12 Gas analysis - Requirements for specifications of analysers/analytical equipment
DIN 51893:2013 Gas analysis - Requirements for specifications of analysers/analytical equipment
DIN EN ISO 15839:2007 Water quality - On-line sensors/analysing equipment for water - Specifications and performance tests (ISO 15839:2003); English version of DIN EN ISO 15839:2007-02
DIN 10809:1988-08 Analysis of tea; preparation of liquor for use in sensory tests
DIN EN ISO 8589:2014-10 Sensory analysis - General guidance for the design of test rooms (ISO 8589:2007 + Amd 1:2014); German version EN ISO 8589:2010 + A1:2014
DIN EN 61181:2007 Mineral oil-filled electrical equipment - Application of dissolved gas analysis (DGA) to factory tests on electrical equipment (IEC 61181:2007); German version EN 61181:2007
DIN EN 13477-1:2001 Non-destructive testing Acoustic emission testing — device characterization Part 1: Device description
DIN 18865-7:2021 Equipment for commercial kitchens - Food distribution equipment - Part 7: Cold storage - Requirements and testing

Danish Standards Foundation

DS/EN ISO 15839:2007 Water quality - On-line sensors/analysing equipment for water - Specifications and performance tests
DS/EN 61181/A1:2012 Mineral oil-filled electrical equipment - Application of dissolved gas analysis (DGA) to factory tests on electrical equipment
DS/EN 61181:2008 Mineral oil-filled electrical equipment - Application of dissolved gas analysis (DGA) to factory tests on electrical equipment
DS/EN 61180-2:2012 High-voltage test techniques for low-voltage equipment - Part 2: Test equipment
DS/EN 62052-11:2003 Electricity metering equipment (a.c.) - General requirements, tests and test conditions - Part 11: Metering equipment
DS/EN 62271-101:2013 High-voltage switchgear and controlgear - Part 101: Synthetic testing

RO-ASRO

STAS 4000-1980 ANALYTICAL REAGENTS Preparation of reagents used in analytical chetnistry
SR 110-6-1995 Sugar. Methods of analysls. Potential floc
STAS SR ISO 7764 Iron ores - Preparation of predried test samples for chemical analysis

Society of Automotive Engineers (SAE)

SAE J2052-2005 Test Device Head Contact Duration Analysis
SAE J823C-1975 FLASHER TEST EQUIPMENT
SAE ARP603-1960 Impulse Test Equipment
SAE J823B-1968 FLASHER TEST EQUIPMENT
SAE ARINC602B-2012 TEST EQUIPMENT GUIDANCE

Spanish Association for Standardization (UNE)

UNE-EN 61181:2008 Mineral oil-filled electrical equipment - Application of dissolved gas analysis (DGA) to factory tests on electrical equipment
UNE-EN 61181:2008/A1:2012 Mineral oil-filled electrical equipment - Application of dissolved gas analysis (DGA) to factory tests on electrical equipment
UNE-EN 61180-2:1996 HIGH-VOLTAGE TEST TECHNIQUES FOR LOW-VOLTAGE EQUIPMENT. PART 2: TEST EQUIPMENT.
UNE-EN ISO 15839:2007 Water quality - On-line sensors/analysing equipment for water - Specifications and performance tests (ISO 15839:2003)
UNE 20608-2:1999 EQUIPMENT RELIABILITY TESTING. PART 2: DESIGN OF TEST CYCLES.
UNE-EN ISO 8589:2010 Sensory analysis - General guidance for the design of test rooms (ISO 8589:2007)
UNE-EN 62052-11:2004 Electricity metering equipment (AC) - General requirements, tests and test conditions -- Part 11: Metering equipment
UNE-EN 62271-101:2013/A1:2018 High-voltage switchgear and controlgear - Part 101: Synthetic testing (Endorsed by Asociación Española de Normalización in October of 2018.)
UNE-EN IEC 62271-101:2021 High-voltage switchgear and controlgear - Part 101: Synthetic testing (Endorsed by Asociación Española de Normalización in October of 2021.)
UNE 20608-3-5:2002 Equipment reliability testing - Part 3: Preferred test conditions - Section 5: Test cycle 5: Ground mobile equipment - Low degree of simulation.
UNE-EN 62271-101:2013 High-voltage switchgear and controlgear - Part 101: Synthetic testing
UNE-EN 61180:2017 High-voltage test techniques for low-voltage equipment - Definitions, test and procedure requirements, test equipment
UNE-EN IEC 62271-101:2021/AC:2021-11 High-voltage switchgear and controlgear - Part 101: Synthetic testing (Endorsed by Asociación Española de Normalización in December of 2021.)

South African Bureau of Standard

SANS 6292:2006 Lime tests - Chemical analysis - Sample preparation and reagents
SANS 62271-101:2007 High-voltage switchgear and controlgear Part 101: Synthetic testing

U.S. Military Regulations and Norms

ARMY A-A-59338 A-1999 WATER QUALITY ANALYSIS SET: PURIFICATION (WQAS-P)
ARMY A-A-59338 A VALID NOTICE 1-2004 WATER QUALITY ANALYSIS SET: PURIFICATION (WQAS-P)
ARMY MIL-T-12681 A-1955 TEST SET, TELEPHONE (TEST SET TS-190)(/U)
ARMY MIL-T-12681 A VALID NOTICE 1-1986 TEST SET, TELEPHONE (TEST SET TS-190)(/U)
ARMY MIL-T-12681 A NOTICE 2-1997 TEST SET, TELEPHONE (TEST SET TS-190)(/U)
ARMY MIL-HDBK-172 A VOL I CHG NOTICE 2-1965 ELECTRONIC TEST EQUIPMENT

Korean Agency for Technology and Standards (KATS)

KS M 0014-2017 Apparatus for chemical analysis
KS C IEC 61180-2-2006(2016) High-voltage test techniques for low-voltage equipment — Part 2：Test equipment
KS Q ISO 8589-2019 Sensory analysis — General guidance for the design of test rooms
KS A IEC 60605-2-2022 Equipment reliability testing－Part 2：Design of test cycles
KS P 1801-2019 Requirements for maintenance of chemical analysis equipments
KS A 4902-2022 Resolution test charts for X- ray apparatus
KS A 4902-1979(2022) Resolution test charts for X- ray apparatus
KS I ISO 15839:2022 Water quality — On-line sensors/analysing equipment for water —Specifications and performance tests
KS P 4406-2021 Visual acuity testing equipments
KS P 4406-2010(2016) Visual acuity testing equipments
KS I ISO 15839:2010 Water quality-On-line sensors/analysing equipment for water-Specifications and performance tests
KS I ISO 15839-2010(2015) Water quality－On-line sensors/analysing equipment for water－Specifications and performance tests
KS C IEC 62271-101-2014(2019) High-voltage switchgear and controlgear — Part 101: Synthetic testing
KS E ISO 7764-2020 Iron ores－Preparation of predried test samples for chemical analysis
KS C IEC 61180:2020 High-voltage test techniques for low-voltage equipment —Definitions, test and procedure requirements, test equipment
KS C IEC 62052-11:2005 Electricity metering equipments(a.c)－General requirements, tests and test conditions－Part 11：Metering equipment

Standard Association of Australia （SAA）

AS 3200.2.16:1992 Approval and test specification - Medical electrical equipment, Part 2.16: Particular requirements for safety - Haemodialysis equipment
AS 4362.2:1996 High-voltage test techniques for low-voltage equipment - Test equipment
AS 2094:1977 Carbon monoxide analyser equipment for road vehicles

VDI - Verein Deutscher Ingenieure

VDI/VDE/DGQ/DKD 2622 Blatt 11-1999 Kalibrieren von Messmitteln fuer elektrische Groessen - Spektrumanalysatoren
VDI/VDE/DGQ 2618 Blatt 10.1-2000 Checking gauges and measuring tools - Testing instruction for micrometers
VDI/VDE/DGQ 2618 Blatt 6.2-2014 Inspection of measuring and test equipment - Test instructions for surface plates
VDI/VDE/DGQ 2618 BLATT 11.4-2016 Inspection of measuring and test equipment - Test instructions for electronic digital indicator gauge
VDI/VDE/DGQ 2618 Blatt 10.4-2006 Pruefmittelueberwachung - Pruefanweisung fuer Einbaumessschrauben
VDI/VDE/DGQ 2618 BLATT 4.5-2016 Inspection of measuring and test equipment - Test instruction for setting standards for thread micrometers

PT-IPQ

NP EN 1441-2000 Medical devices Risk analysis

Association of German Mechanical Engineers

VDI/VDE/DGQ/DKD 2622 Blatt 11-2003 Calibration of measurement equipments for electrical quantities - Spectrum analyzers
VDI/VDE/DGQ 2618 Blatt 10.1-2001 Inspection of measuring and test equipments - Test instructions for micrometers

American Society for Testing and Materials (ASTM)

ASTM E829-94 Standard Practice for Preparing Refuse-Derived Fuel (RDF) Laboratory Samples for Analysis
ASTM E82-91(2001) Standard Test Method for Determining the Orientation of a Metal Crystal
ASTM D4195-88(2003) Standard Guide for Water Analysis for Reverse Osmosis Application

European Committee for Standardization (CEN)

EN ISO 15839:2006 Water quality - On-line sensors/analysing equipment for water - Specifications and performance tests

RU-GOST R

GOST R ISO 8589-2005 Sensory analysis. Guidance for the design of test rooms
GOST R 51148-1998 Medical devices. Requirements for samples and documentation presented for toxicological tests, sanitary and chemical analyses, tests for sterility and pyrogenicity
GOST 19647-1974 Methods and means of radioisotope X-ray analysis. Terms and definitions
GOST ISO 5682-1-2004 Equipment for crop protection. Spraying equipment. Part 1. Test methods for sprayer nozzles
GOST 11303-1975 Peat and products of its processing. Method of preparation of analysis sample
GOST 19318-1973 Pulp. Sampl preparation for chemical analyses

US-FCR

FCR COE ETL 1110-2-550-1997 RELIABILITY ANALYSIS OF HYDROPOWER EQUIPMENT
FCR COE ETL 1110-2-549-1997 RELIABILITY ANALYSIS OF NAVIGATIONAL LOCK AND DAM MECHANICAL AND ELECTRICAL EQUIPMENT

SE-SIS

SIS SS IEC 714:1983 Electronic measurement equipment - Expression of the properties of spectrum analyzers
SIS SS IEC 776:1986 Electronic measuring equipment- Expression ofthe properties oflogic analyzers
SIS SS IEC 746:1984 Electronic measuring equipment - Expression of performance of electrochemical analyzers
SIS SS-IEC 601-2-16:1991 Medical electrical equipment - Part 2: Particular requirements for the safety ofhaemodiafysis equipment
SIS SS IEC 528:1984 Electronic measuring equipment - Expression ofperformance of air quality infra-red analyzers

VDE - VDE Verlag GmbH@ Berlin@ Germany

VDE 0404-3-2005 Testing and measuring equipment for testing the electrical safety of electrical devices - Part 3: Equipment for periodical tests and tests prior to commissioning medical electrical devices or systems
VDE 0404-2-2002 Testing and measuring equipment for checking the electric safety of electric devices - Part 2: Testing equipment for tests after repair@ change or in case of repeat tests

Lithuanian Standards Office

LST EN ISO 15839:2006 Water quality - On-line sensors/analysing equipment for water - Specifications and performance tests (ISO 15839:2003)
LST EN 61181-2007 Mineral oil-filled electrical equipment - Application of dissolved gas analysis (DGA) to factory tests on electrical equipment (IEC 61181:2007)
LST EN 61181-2007/A1-2012 Mineral oil-filled electrical equipment - Application of dissolved gas analysis (DGA) to factory tests on electrical equipment (IEC 61181:2007/A1:2012)
LST EN 61180-2-2001 High-voltage test techniques for low-voltage equipment. Part 2: Test equipment (IEC 61180-2:1994)
LST EN ISO 8589:2010 Sensory analysis - General guidance for the design of test rooms (ISO 8589:2007)

International Telecommunication Union (ITU)

ITU-T Q.164-1989 Test Equipment for Checking Equipment and Signals - Specifications of Signalling Systems Nos. 4 and 5 (Study Group XI) 2 pp
ITU-T Q.331-1989 Test Equipment for Checking Equipment and Signals - Specifications of Signalling Systems R1 and R2 (Study Group XI) 3 pp
ITU-T Q.331-1988 Test equipment for checking equipment and signals
ITU-T Q.134-1989 Routine Testing of Equipment (Local Maintenance) - Specifications of Signalling Systems Nos. 4 and 5 (Study Group XI) 2 pp
ITU-T Q.164-1988 Test equipment for checking equipment and signals

Aeronautical Radio Inc.

ARINC 738-3 ITEM 9.0-2001 Built-In Test Equipment (Bite)
ARINC 707-6 ITEM 6.0 Provisions for Automatic Test Equipment
ARINC 753-3 ITEM 8.0-2001 Provisions for Automatic Test Equipment
ARINC 704A ITEM 6.0 Provisions for Automatic Test Equipment
ARINC 725-2 ITEM 6.0-1984 Provisions for Automatic Test Equipment
ARINC 723-3 ITEM 5.0-1988 Provisions for Automatic Test Equipment
ARINC 729-1 ITEM 5.0-1981 Provisions for Automatic Test Equipment
ARINC 719-5 ITEM 5.0 Automatic Test Equipment Provisions
ARINC 703-2 ITEM 6.0 Provisions for Automatic Test Equipment
ARINC 718-4 ITEM 5.0 Provisions for Automatic Test Equipment
ARINC 706-4 ITEM 6.0-1988 Provisions for Automatic Test Equipment
ARINC 712-7 ITEM 5.0 Provisions for Automatic Test Equipment
ARINC 716-11 ITEM 6.0 Automatic Test Equipment Provisions
ARINC 753-3 ITEM 9.0-2001 Provisions for Built-in Test Equipment
ARINC 715-3 ITEM 5.0 Built-In Test Equipment (BITE)
ARINC 727-1 ITEM 7.0-1987 Built-In Test Equipment (BITE)
ARINC 718-4 ITEM 8.0-1989 Built-In Test Equipment (BITE)
ARINC 608A-1993 Design Guidance for Avionics Test Equipment Part 1 System Description
ARINC 726-1 ITEM 8.0-1981 Provisions for Automatic Test Equipment
ARINC 727-1 ITEM 6.0-1987 Provisions for Automatic Test Equipment
ARINC 738-3 ITEM 8.0-2001 Provisions for Automatic Test Equipment
ARINC 704-7 ITEM 6.0 Provisions for Automatic Test Equipment
ARINC 711-10 ITEM 5.0 Provisions for Automatic Test Equipment
ARINC 715-3 ITEM 4.0 Provisions for Automatic Test Equipment
ARINC 701-1 ITEM 9.0 BITE
ARINC 705-5 ITEM 7.0 Provisions for Automatic Test Equipment
ARINC 738A-1 ITEM 8.0-2001 Provisions for Automatic Test Equipment
ARINC 709-8 ITEM 7.0-1988 Provisions for Automatic Test Equipment
ARINC 716-11 ITEM 7.0 Built-in Test Equipment (BITE)
ARINC 752-1 ITEM 7.0 Built-In Test Equipment
ARINC 745-2 ITEM 7.0-1993 Built In Test Equipment (BITE)
ARINC 752-1 ITEM 7.0-1995 Built-In Test Equipment
ARINC 602B-2012 TEST EQUIPMENT GUIDANCE
ARINC 708-6 ITEM 11.0 Build-In Test Equipment (BITE)
ARINC 709-8 ITEM 8.0 Built-In Test Equipment
ARINC 738A-1 ITEM 9.0-2001 Built-In Test Equipment (BITE)
ARINC 708-6 ITEM 10.0 Provisions for Automatic Test Equipment
ARINC 711-10 ITEM 7.0 Built-In Test Equipment (BITE)
ARINC 712-7 ITEM 6.0 Built-In Test Equipment (BITE)
ARINC 706-4 ITEM 7.0 Built-In Test Equipment (BITE)
ARINC 719-5 ITEM 6.0 Built-In Test Equipment (BITE)
ARINC 723-3 ITEM 6.0-1988 Built-In Test Equipment (BITE)
ARINC 743A-4 ITEM 7.0 BITE

International Electrotechnical Commission (IEC)

IEC 61181:2012 Mineral oil-filled electrical equipment - Application of dissolved gas analysis (DGA) to factory tests on electrical equipment
IEC 61181:2007 Mineral oil-filled electrical equipment - Application of dissolved gas analysis (DGA) to factory tests on electrical equipment
IEC 62052-11:2003 Electricity metering equipment (AC) - General requirements, tests and test conditions - Part 11: Metering equipment
IEC 61181:2007+AMD1:2012 CSV Mineral oil-filled electrical equipment - Application of dissolved gas analysis (DGA) to factory tests on electrical equipment
IEC 61180:2016 High-voltage test techniques for low-voltage equipment - Definitions, test and procedure requirements, test equipment

Institute of Electrical and Electronics Engineers (IEEE)

IEEE Std 1554-2005 IEEE Recommended Practice for Inertial Sensor Test Equipment, Instrumentation, Data Acquisition, and Analysis
IEEE Std 1554-2005(R2011) IEEE Recommended Practice for Inertial Sensor Test Equipment, Instrumentation, Data Acquisition, and Analysis
IEEE Std P1554/D15d, Apr 2005 IEEE Draft Recommended Practice for Inertial Sensor Test Equipment, Instrumentation, Data Acquisition, and Analysis

AT-ON

ONORM M 1349-1997 Verification of measuring and test equipment - Testing Instruction for measuring tapes
ONORM L 5261-1981 Testing of milking installations; connection for testing
ONORM E 1371-1978 Testing devices; Impact-Test-Apparatus
ONORM M 1349/AC1-1999 Verification of measuring and test equipment - Testing Instruction for measuring tapes (Corrigendum)
ONORM L 5262-1985 Milking machines; testing; testing devices, testing aids and fest method
ONORM M 1342-3-1994 Control of measuring and test equipment - Testing Instruction for internal micrometers
ONORM E 1352-1955 Test Equipment. Detector Staubschuβ

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc.

ASHRAE 4267-1999 Analytical Algorithm for Hydrolic Circuit Analysis and Assessment of Equipment Performance

European Committee for Electrotechnical Standardization（CENELEC）

EN 61181:2007 Mineral oil-filled electrical equipment - Application of dissolved gas analysis (DGA) to factory tests on electrical equipment (Incorporates Amendment A1: 2012)
EN IEC 62271-101:2021 High-voltage switchgear and controlgear - Part 101: Synthetic testing
EN 61180:2016 High-voltage test techniques for low-voltage equipment - Definitions, test and procedure requirements, test equipment

CENELEC - European Committee for Electrotechnical Standardization

EN 61181:1993 Impregnated Insulating Materials - Application of Dissolved Gas Analysis (DGA) to Factory Tests on Electrical Equipment

IEEE - The Institute of Electrical and Electronics Engineers@ Inc.

IEEE 1554 ERTA-2013 Errata to Recommended Practice for Inertial Sensor Test Equipment@ Instrumentation@ Data Acquisition@ and Analysis
IEEE 21-1942 APPARATUS BUSHINGS AND TEST CODE FOR APPARATUS BUSHINGS

HU-MSZT

MSZ 16050/5.lap-1969 Definition of chemical analysis for comprehensive testing of metal equipment, copper content
MNOSZ 5956-1956 Acetylene equipment (option B) for analysis purposes
MNOSZ 700-3.lap-1955 Semiconductor Model Analysis Test Laboratory Sample Preparation

KR-KS

KS I ISO 15839-2022 Water quality — On-line sensors/analysing equipment for water —Specifications and performance tests
KS C IEC 61180-2020 High-voltage test techniques for low-voltage equipment —Definitions, test and procedure requirements, test equipment

Japanese Industrial Standards Committee (JISC)

JIS K 0154:2017 Surface chemical analysis -- Guidelines for preparation and mounting of specimens for analysis

YU-JUS

JUS N.A5.543-1989 Righ voltage test techniques. Heasuring devices
JUS M.J5.013-1994 Test conditJcms for horiag and milling machincs nith horizontal spindle - Testing of the accuracy - Part II: Floor typn mac.hines
JUS M.E2.220-1995 Testing of boiler plants

International Organization for Standardization (ISO)

ISO 15839:2003 Water quality - On-line sensors/analysing equipment for water - Specifications and performance tests
ISO 6712:1982 Gas analysis — Sampling and transfer equipment for gases supplying an analytical unit
ISO/IEEE 11073-90101:2008 Health informatics — Point-of-care medical device communication — Part 90101: Analytical instruments — Point-of-care test
ISO 18116:2005 Surface chemical analysis - Guidelines for preparation and mounting of specimens for analysis
ISO 6668:2008 Green coffee - Preparation of samples for use in sensory analysis

PL-PKN

PN M47186 ArkusZ03-1975 Painting apparatus estings
PN C04501-1971 Sieve analysis. Rules of testing
PN E05160-01-1991 Low-voltage switchgear and controlgear assemblies. Requirements for type-tested and partially type-tested assemblies

Alliance of Telecommunications Industry Solutions （ATIS)

ATIS 0600002-2005 Testing of Telecommunications Equipment

ETSI - European Telecommunications Standards Institute

TR 103 538-2019 Environmental Engineering (EE); Analysis of test method and test severity for mechanical test of equipment installed on poles/towers (V1.1.1)

CZ-CSN

CSN ISO 6712:1993 Gas analysis. Sampling and transfer equipment for gases supplying an analytical unit
CSN IEC 605-3-1:1992 Equipment realibility testing Part 3-1: Preferred test conditions Indoor portable equipment — Low degree of simulation
CSN IEC 736:1992 Testing equipment for electrical energy meters

ATIS - Alliance for Telecommunications Industry Solutions

0600002-2005 Testing of Telecommunications Equipment

European Telecommunications Standards Institute (ETSI)

ETSI PRETS 300 019-2-5-1994 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment Part 2-5: Specification of Environmental Tests Ground Vehicle Installations

SAE - SAE International

SAE ARP1398-1989 Testing of Oxygen Equipment

BE-NBN

NBN T 97-001-1984 Gas analysis- Sampling and transfer equipment for gases supplying an analytical unit