Test and analysis equipment

Test and analysis equipment, Total:155 items.

The international standard classification for "Test and analysis equipment" includes: Electromagnetic compatibility(EMC) , Implants for surgery, prosthetics and orthotics .

The Chinese standard classification for "Test and analysis equipment" includes: Electromagnetic compatibility , Extracorporeal circulation, artificial organ and prosthesis device .

Group Standards of the People's Republic of China

T/QGCML 4425-2024 Intelligent analysis equipment for monitoring information
T/QGCML 4072-2024 IT equipment operating status monitoring and analysis system

Professional Standard - Post and Telecommunication

YD/T 3914-2021 Test methods for VxLAN in access network
YD/T 3993-2021 Test methods of Primary Reference T ime Clock (PRTC) equ i pment
YD/T 3236-2017 Testing method for service-aware and controlling technology of broadband network access server

Professional Standard - Commodity Inspection

SN/T 4239-2015 Management requirements for large equipment of chemical analysis in laboratory

未注明发布机构

DNVGL-RP-E305-2017 Design, testing and analysis of offshore fibre ropes

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 38659.3-2022 Electromagnetic compatibility—Risk assessment—Part 3：Risk analysis method for device

Military Standard of the People's Republic of China-General Armament Department

GJB 6761-2009 Compiling requirement for result analysis reports of ground-to-ground missile flight test

Professional Standard - Medicine

YY 0054-2010 Haemodialysis equipment
YY 0054-2023 Haemodialysis equipment

Society of Automotive Engineers (SAE)

SAE J2052_201607 Test Device Head Contact Duration Analysis
SAE J2052_201101 Test Device Head Contact Duration Analysis
SAE J2052_199712 Test Device Head Contact Duration Analysis
SAE J2052_199003 Test Device Head Contact Duration Analysis
SAE J2052_200512 Test Device Head Contact Duration Analysis
SAE J2052-2005 Test Device Head Contact Duration Analysis

United States Navy

NAVY MIL-STD-2218-1992 THERMAL DESIGN, ANALYSIS, AND TEST PROCEDURES FOR AIRBORNE ELECTRONIC EQUIPMENT

ESDU - Engineering Sciences Data Unit

TM 189-2018 Techmical Memorandum Analysis of Tests on a Convergent Nozzle in an Altitude Test Facility

Association Francaise de Normalisation

NF P18-566:2014 Granulats - Analyse granulométrique - Essai à l'aide d'un appareil d'ombroscopie
NF EN ISO 15839:2006 Water quality - Direct water analysis equipment/sensors - Specifications and performance testing
NF EN 15964:2011 Ethylotests, autres que les dispositifs à usage unique - Exigences et méthodes d'essai
NF EN 61181/A1:2012 Electrical equipment impregnated with mineral oil - Application of dissolved gas analysis (DGA) during factory testing of electrical equipment
NF T90-554:2007 Water quality - On-line sensors/analysing equipment for low turbidity measurement - Specifications and performance tests
NF C27-240/A1*NF EN 61181/A1:2012 Mineral oil-filled electrical equipment - Application of dissolved gas analysis (DGA) to factory tests on electrical equipment
NF X20-251:1982 Analysis of gases. Devices for the sampling of gases and their transfer to an analytical unit.

British Standards Institution (BSI)

BS IEC 61745:1998 End-face image analysis procedure for the calibration of optical fibre geometry test sets
BS IEC 61745:1999 End-face image analysis procedure for the calibration of optical fibre geometry test sets
BS EN ISO 15839:2006 Water quality. On-line sensors/analysing equipment for water. Specifications and performance tests
BS EN 1441:1998 Medical Device Risk Analysis
BS 7020-1:1988 Analysis of iron ores-Method for the preparation of pre-dried test samples for chemical analysis
BS EN ISO 8589:2010+A1:2014 Sensory analysis. General guidance for the design of test rooms
BS ISO 8589:2007 Sensory analysis. General guidance for the design of test rooms
BS EN 61181:2007 Mineral oil-filled electrical equipment - Application of dissolved gas analysis (DGA) to factory tests on electrical equipment
BS 4325-9:1984 Methods for analysis of oilseed residues-Preparation of test samples
BS EN 61181:2007+A1:2012 Mineral oil-filled electrical equipment. Application of dissolved gas analysis (DGA) to factory tests on electrical equipment
BS EN 61181:1993 Impregnated insulating materials. Application of dissolved gas analysis (DGA) to factory tests on electrical equipment
PD ISO/TR 15155-2:2012 Agricultural irrigation equipment. Test facilities for agricultural irrigation equipment. Test facility operating manual
BS 4325-9:1992 Methods for analysis of oilseed residues. Preparation of test samples
BS EN ISO 15839:2004 Water quality - On-line sensors/analysing equipment for water - Specifications and performance tests
BS ISO 15839:2004 Water quality - On-line sensors/analysing equipment for water - Specifications and performance tests

GCC Standardization Organization

GSO ISO 15839:2013 Water quality -- On-line sensors/analysing equipment for water -- Specifications and performance tests
GSO OIML R126:2007 Evidential Breath Analyzers
GSO IEC 61181:2014 Mineral oil-filled electrical equipment - Application of dissolved gas analysis (DGA) to factory tests on electrical equipment
GSO IEC 61180-2:2014 High-voltage test techniques for low-voltage equipment - Part 2: Test equipment
GSO ISO 8589:2011 Sensory analysis — General guidance for the design of test rooms
GSO IEC 60605-2:2014 Equipment reliability testing - Part 2: Design of test cycles

Danish Standards Foundation

DANSK DS/EN ISO 15839:2006 Water quality - On-line sensors/analysing equipment for water - Specifications and performance tests
DS/EN ISO 15839:2007 Water quality - On-line sensors/analysing equipment for water - Specifications and performance tests
DANSK DS/EN 61181:2008 Mineral oil-filled electrical equipment - Application of dissolved gas analysis (DGA) to factory tests on electrical equipment
DS/EN 61181/A1:2012 Mineral oil-filled electrical equipment - Application of dissolved gas analysis (DGA) to factory tests on electrical equipment
DANSK DS/EN 61181/A1:2008 Mineral oil-filled electrical equipment - Application of dissolved gas analysis (DGA) to factory tests on electrical equipment
DS/EN 61181:2008 Mineral oil-filled electrical equipment - Application of dissolved gas analysis (DGA) to factory tests on electrical equipment
DS/EN 61180-2:2012 High-voltage test techniques for low-voltage equipment - Part 2: Test equipment
DANSK DS/EN ISO 8589/A1:2010 Sensory analysis - General guidance for the design of test rooms
DANSK DS/EN ISO 8589:2010 Sensory analysis - General guidance for the design of test rooms

German Institute for Standardization

DIN EN ISO 15839:2007-02 Water quality - On-line sensors/analysing equipment for water - Specifications and performance tests (ISO 15839:2003); German version EN ISO 15839:2006
DIN 51893 E:2012-07 Gas analysis - Requirements for specifications of analysers/analytical equipment
DIN 51893:2013-12 Gas analysis - Requirements for specifications of analysers/analytical equipment
DIN 51893:2013 Gas analysis - Requirements for specifications of analysers/analytical equipment
DIN 51893 E:2012 Draft Document - Gas analysis - Requirements for specifications of analysers/analytical equipment
DIN EN ISO 15839:2007 Water quality - On-line sensors/analysing equipment for water - Specifications and performance tests (ISO 15839:2003); English version of DIN EN ISO 15839:2007-02
DIN 10809:1988-08 Analysis of tea; preparation of liquor for use in sensory tests
DIN EN ISO 8589:2014-10 Sensory analysis - General guidance for the design of test rooms (ISO 8589:2007 + Amd 1:2014); German version EN ISO 8589:2010 + A1:2014
DIN 54180-2 E:2016 Draft Document - Non-destructive testing - Shearography - Part 2: Equipment
DIN EN 61181/A1 E:2011 Draft Document - Mineral oil-filled electrical equipment - Application of dissolved gas analysis (DGA) to factory tests on electrical equipment (IEC 10/838/CDV:2011); German version EN 61181:2007/FprA1:2011
DIN EN 61181/A1 E:2011-06 Draft Document - Mineral oil-filled electrical equipment - Application of dissolved gas analysis (DGA) to factory tests on electrical equipment (IEC 10/838/CDV:2011); German version EN 61181:2007/FprA1:2011
DIN EN 61181:2007 Mineral oil-filled electrical equipment - Application of dissolved gas analysis (DGA) to factory tests on electrical equipment (IEC 61181:2007); German version EN 61181:2007

Ente Nazionale Italiano di Unificazione

UNI EN ISO 15839:2006 Water quality - On-line sensors/ analysing equipment for water - Specifications and performance tests
UNI ISO 3591:1979 Sensory analysis. Apparatus. Wine- tasting glass.
UNI ISO 8589:1990 Sensory analysis. General guidance for the design of test rooms.
UNI EN 15002:2015 Characterization of waste - Preparation of test portions from the laboratory sample

RO-ASRO

STAS 4000-1980 ANALYTICAL REAGENTS Preparation of reagents used in analytical chetnistry
SR 110-6-1995 Sugar. Methods of analysls. Potential floc

Bureau of Indian Standards

IS 16085-2023 Mineral Oil-Filled Electrical Equipment - Application Of Dissolved Gas Analysis Dga To Factory Tests On Electrical Equipment
IS 15316-2016 Sensory Analysis - General Guidance for the Design of Test Rooms

The Directorate General of Specifications and Metrology (DGSM)

OS GSO IEC 61181:2014 Mineral oil-filled electrical equipment - Application of dissolved gas analysis (DGA) to factory tests on electrical equipment
OS GSO IEC 60605-2:2014 Equipment reliability testing - Part 2: Design of test cycles
OS GSO ISO 8589:2011 Sensory analysis — General guidance for the design of test rooms

Spanish Association for Standardization (UNE)

UNE-EN 61181:2008 Mineral oil-filled electrical equipment - Application of dissolved gas analysis (DGA) to factory tests on electrical equipment
UNE-EN 61181:2008/A1:2012 Mineral oil-filled electrical equipment - Application of dissolved gas analysis (DGA) to factory tests on electrical equipment
AENOR UNE-EN ISO 15839:2007 Water quality - On-line sensors/analysing equipment for water - Specifications and performance tests (ISO 15839:2003)
UNE-EN 61180-2:1996 HIGH-VOLTAGE TEST TECHNIQUES FOR LOW-VOLTAGE EQUIPMENT. PART 2: TEST EQUIPMENT.
UNE-EN ISO 15839:2007 Water quality - On-line sensors/analysing equipment for water - Specifications and performance tests (ISO 15839:2003)
AENOR UNE-EN 62052-11:2004 Electrical energy (AC) measurement equipment. General requirements, tests and test conditions. Part 11: Measurement equipment
AENOR UNE-EN 62052-11/A1:2018 Electrical energy (AC) measurement equipment. General requirements, tests and test conditions. Part 11: Measurement equipment
UNE 20608-2:1999 EQUIPMENT RELIABILITY TESTING. PART 2: DESIGN OF TEST CYCLES.
UNE-EN ISO 8589:2010 Sensory analysis - General guidance for the design of test rooms (ISO 8589:2007)

South African Bureau of Standard

SANS 6292:2006 Lime tests - Chemical analysis - Sample preparation and reagents

Comitato Elettrotecnico Italiano

CEI EN 61181:2008 Mineral oil-filled electrical equipment - Application of dissolved gas analysis (DGA) to factory tests on electrical equipment
CEI EN 61181/A1:2008 Mineral oil-filled electrical equipment - Application of dissolved gas analysis (DGA) to factory tests on electrical equipment
CEI 56-18:2000 Equipment reliability testing - Part 2: Design of test cycles

Association of German Mechanical Engineers

VDI/VDE/DGQ/DKD 2622 BLATT 11:2003 Calibration of measuring instruments for electrical quantities — spectrum analyzers
VDI/VDE/DGQ/DKD 2622 Blatt 11-1999 Kalibrieren von Messmitteln fuer elektrische Groessen - Spektrumanalysatoren
VDI/VDE/DGQ/DKD 2622 Blatt 11-2003 Calibration of measurement equipments for electrical quantities - Spectrum analyzers
VDI/VDE/DGQ/DKD 2618 BLATT 11.1:2021 Test equipment monitoring — Test instructions for mechanical dial gauges
VDI/VDE/DGQ 2618 BLATT 11.1:2014 Test equipment monitoring — Test instructions for mechanical dial gauges
VDI/VDE/DGQ 2618 BLATT 10.1:2001 Test equipment monitoring — Test instructions for micrometers
VDI/VDE/DGQ 2618 BLATT 10.4:2008 Test equipment monitoring — Instructions for monitoring measuring equipment for geometrical dimensions — Test instructions for micrometer heads

Standard Association of Australia （SAA）

AS 3200.2.16:1992 Approval and test specification - Medical electrical equipment, Part 2.16: Particular requirements for safety - Haemodialysis equipment
AS 4362.2:1996 High-voltage test techniques for low-voltage equipment - Test equipment

Korean Agency for Technology and Standards (KATS)

KS M 0014-2017 Apparatus for chemical analysis
KS C IEC 61180-2-2006(2016) High-voltage test techniques for low-voltage equipment — Part 2：Test equipment
KS Q ISO 8589-2019 Sensory analysis — General guidance for the design of test rooms
KS A IEC 60605-2-2022 Equipment reliability testing－Part 2：Design of test cycles
KS P 1801-2019 Requirements for maintenance of chemical analysis equipments
KS I ISO 15839-2022 Water quality — On-line sensors/analysing equipment for water —Specifications and performance tests

U.S. Military Regulations and Norms

ARMY A-A-59338 A-1999 WATER QUALITY ANALYSIS SET: PURIFICATION (WQAS-P)
ARMY A-A-59338 A VALID NOTICE 1-2004 WATER QUALITY ANALYSIS SET: PURIFICATION (WQAS-P)
ARMY MIL-T-12681 A VALID NOTICE 1-1986 TEST SET, TELEPHONE (TEST SET TS-190)(/U)
ARMY MIL-T-12681 A-1955 TEST SET, TELEPHONE (TEST SET TS-190)(/U)
ARMY MIL-T-12681 A NOTICE 2-1997 TEST SET, TELEPHONE (TEST SET TS-190)(/U)

Standards Norway

NS-EN ISO 15839:2006 Water quality — On-line sensors/analysing equipment for water — Specifications and performance tests (ISO 15839:2003)

Swedish Institute for Standards

SS-EN ISO 15839:2006 Water quality - On-line sensors/analysing equipment for water Specifications and performance tests (ISO 15839:2003)

PT-IPQ

NP EN 1441-2000 Medical devices Risk analysis

Standards New Zealand

NZS/AS 3200.2.16:1992 Approval and test specification - Medical electrical equipment - Particular requirements for safety - Haemodialysis equipment

American Society for Testing and Materials (ASTM)

ASTM E829-94 Standard Practice for Preparing Refuse-Derived Fuel (RDF) Laboratory Samples for Analysis
ASTM E82-91(2001) Standard Test Method for Determining the Orientation of a Metal Crystal
ASTM STP 981-1988 STP 981 Bonded Joints: Testing, Analysis and Design

European Committee for Standardization (CEN)

EN ISO 15839:2006 Water quality - On-line sensors/analysing equipment for water - Specifications and performance tests

Gosstandart of Russia

GOST R ISO 8589-2005 Sensory analysis. Guidance for the design of test rooms
GOST R 51148-1998 Medical devices. Requirements for samples and documentation presented for toxicological tests, sanitary and chemical analyses, tests for sterility and pyrogenicity
GOST 19647-1974 Methods and means of radioisotope X-ray analysis. Terms and definitions

SE-SIS

SIS SS IEC 776:1986 Electronic measuring equipment- Expression ofthe properties oflogic analyzers
SIS SS IEC 714:1983 Electronic measurement equipment - Expression of the properties of spectrum analyzers
SIS SS IEC 746:1984 Electronic measuring equipment - Expression of performance of electrochemical analyzers

US-FCR

FCR COE ETL 1110-2-550-1997 RELIABILITY ANALYSIS OF HYDROPOWER EQUIPMENT

Japanese Industrial Standards Committee (JISC)

JIS T 1201-1:2020 Audiometric equipment -- Part 1: Equipment for pure-tone and speech audiometry
JIS K 0154:2017 Surface chemical analysis -- Guidelines for preparation and mounting of specimens for analysis

Lithuanian Standards Office

LST EN ISO 15839:2006 Water quality - On-line sensors/analysing equipment for water - Specifications and performance tests (ISO 15839:2003)
LST EN 61181-2007 Mineral oil-filled electrical equipment - Application of dissolved gas analysis (DGA) to factory tests on electrical equipment (IEC 61181:2007)
LST EN 61181-2007/A1-2012 Mineral oil-filled electrical equipment - Application of dissolved gas analysis (DGA) to factory tests on electrical equipment (IEC 61181:2007/A1:2012)
LST EN 61180-2-2001 High-voltage test techniques for low-voltage equipment. Part 2: Test equipment (IEC 61180-2:1994)

Association for Electrical, Electronic & Information Technologies (VDE)

VDE 0404-3-2005 Testing and measuring equipment for testing the electrical safety of electrical devices - Part 3: Equipment for periodical tests and tests prior to commissioning medical electrical devices or systems
VDE 0404-2-2002 Testing and measuring equipment for checking the electric safety of electric devices - Part 2: Testing equipment for tests after repair@ change or in case of repeat tests
VDE 0370-13-1994*DIN EN 61181:1994 Impregnated insulating materials; Application of dissolved gas analysis (DGA) to factory tests on electrical equipment

International Electrotechnical Commission (IEC)

IEC 61181:2012 Mineral oil-filled electrical equipment - Application of dissolved gas analysis (DGA) to factory tests on electrical equipment
IEC 61181:2007 Mineral oil-filled electrical equipment - Application of dissolved gas analysis (DGA) to factory tests on electrical equipment

Institute of Electrical and Electronics Engineers (IEEE)

IEEE Std 1554-2005(R2011) IEEE Recommended Practice for Inertial Sensor Test Equipment, Instrumentation, Data Acquisition, and Analysis
IEEE Std 1554-2005 IEEE Recommended Practice for Inertial Sensor Test Equipment, Instrumentation, Data Acquisition, and Analysis
IEEE 1554 ERTA-2013 Errata to Recommended Practice for Inertial Sensor Test Equipment@ Instrumentation@ Data Acquisition@ and Analysis
IEEE Std P1554/D15d, Apr 2005 IEEE Draft Recommended Practice for Inertial Sensor Test Equipment, Instrumentation, Data Acquisition, and Analysis

Aeronautical Radio Inc.

ARINC 738-3 ITEM 9.0-2001 Built-In Test Equipment (Bite)
ARINC 707-6 ITEM 6.0 Provisions for Automatic Test Equipment
ARINC 753-3 ITEM 8.0-2001 Provisions for Automatic Test Equipment
ARINC 738A-1-2001(2004) Provisions for Automatic Test Equipment

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO IEC 60605-2:2016 Equipment reliability testing - Part 2: Design of test cycles

AT-ON

ONORM M 1349-1997 Verification of measuring and test equipment - Testing Instruction for measuring tapes

International Telecommunication Union (ITU)

ITU-T Q.164-1989 Test Equipment for Checking Equipment and Signals - Specifications of Signalling Systems Nos. 4 and 5 (Study Group XI) 2 pp
ITU-T Q.331-1989 Test Equipment for Checking Equipment and Signals - Specifications of Signalling Systems R1 and R2 (Study Group XI) 3 pp

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE)

ASHRAE 4267-1999 Analytical Algorithm for Hydrolic Circuit Analysis and Assessment of Equipment Performance

European Committee for Electrotechnical Standardization（CENELEC）

EN 61181:2007 Mineral oil-filled electrical equipment - Application of dissolved gas analysis (DGA) to factory tests on electrical equipment (Incorporates Amendment A1: 2012)

CENELEC - European Committee for Electrotechnical Standardization

EN 61181:1993 Impregnated Insulating Materials - Application of Dissolved Gas Analysis (DGA) to Factory Tests on Electrical Equipment

European Telecommunications Standards Institute (ETSI)

ETSI TR 103 538-2019 Environmental Engineering (EE); Analysis of test method and test severity for mechanical test of equipment installed on poles/towers

Magyar Szabványügyi Testület

MSZ 16050/5.lap-1969 Definition of chemical analysis for comprehensive testing of metal equipment, copper content