copper salt precipitation

copper salt precipitation, Total:189 items.

The international standard classification for "copper salt precipitation" includes: Rubber compounding ingredients , Salts , Cereals, pulses and derived products , Food additives .

The Chinese standard classification for "copper salt precipitation" includes: Carbon black , Inorganic salt , Cereal crop and product , Synthetic food additives , Lubricating oil , Petroleum asphalt , Water supply and draining engineering in general .

Professional Standard - Chemical Industry

HG/T 2226-2000 Calcium carbonate precipitated for industrial use
HG/T 2226-2010 Ordinary precipitated calcium carbonate for industrial use
HGB 3418-1962 Precipitated silver
HG/T 3068-1999 Rubber compounding ingredients. Silica, precipitated, hydrated. Determination of total copper content
HG/T 3068-2008 Rubber compounding ingredients—Silica,precipitated,hydrated—Determination of total copper content
HG/T 2567-1994 Industrial Active Precipitated Calcium Carbonate
HG/T 2776-2010 Fine precipitated calcium carbonate andfine activated precipitated calcium carbonate for industrial use
HG/T 2567-2006 Activated precipitated calcium carbonate for industrial use

Group Standards of the People's Republic of China

T/NAIA 0161-2022 Determination of chemical oxygen demand in high chlorine mine water in coal mines by silver salt precipitation-dichromate method
T/QAS 082.12-2023 Chemical Analysis of Rock Salt and Glauber's Salt - Part 12: Determination of Copper, Lead, Zinc, Arsenic by Ferric Hydroxide Co-precipitation Inductively Coupled Plasma Emission Spectrometry
T/JXXTSGHYXH 001-2021 Industrial Active Precipitated Calcium Carbonate
T/CAMIE 13-2021 Wastewater treatment equipment with magnetic coagulation and sedimentation
T/CCMSA 40523-2021 Drainage valves for sedimentation tank
T/QGCML 262-2022 Inverted U-shaped sedimentation and separation device

化学工业部

HG 2226-1991 Industrial precipitated calcium carbonate

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 2899-2017 Barium sulphate precipitated for industrial use

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB 1898-1996 Food additive Calcium carbonate precipitated
GB/T 2899-2008 Barium sulphate precipitated for industrial use
GB/T 2899-1996 Barium sulphate,precipitated for industrial use
GB/T 15685-1995 Method for determination of sedimentation value in wheat flour

Taiwan Provincial Standard of the People's Republic of China

CNS 1383-1972 Precipitated Calcium Carbonate for Technical Use
CNS 12261-1988 Method of Test for Precipitation Number of Lubricating Oils
CNS 1931-1970 Silver, Precipitated
CNS 1797-1968 Manganese Dioxide, Precipitated

工业和信息化部

JB/T 14104-2020 Special-shaped sedimentation tank sludge scraper
HG/T 2226-2019 Ordinary precipitated calcium carbonate for industrial use

Professional Standard - Petrochemical Industry

SH/T 0099.12-2005 Determination of settlement of emulsified asphalt
SH/T 0024-1990 Determination of precipitation number for lubricating oil

Professional Standard - Agriculture

NY/T 1095-2006 Wheat determination of sedimentation index Zeleny test

Professional Standard - Energy

NB/SH/T 6005-2020 Determination of trace sediment恤lubricating oils

Professional Standard - Recommended Standards for Engineering Construction

CECS 130-2001（条文说明） Standard for coagulation-flocculation and sedimentation beaker test method
CECS 130-2001 Standard for coagulation-tlocculation and sedimentation beaker test method

Military Standard of the People's Republic of China-General Armament Department

GJB 962-1990 Lubricating Oil Trace Precipitation Determination

SAE - SAE International

SAE AMS4231-1942 CAST ALUMINUM ALLOY 4% Copper (Solution and Precipitation)
SAE AMS4535B-1995 Copper-Beryllium Alloy@ Mechanical Tubing 98Cu - 1.9Be Solution and Precipitation Heat Treated (TF00@ Formerly AT) (UNS C17200)
SAE AMS4535A-1994 COPPER-BERYLLIUM ALLOY@ MECHANICAL TUBING 98Cu - 1.9Be Solution and Precipitation Heat Treated (TF00@ Formerly AT) (UNS C17200)
SAE AMS4535-1991 COPPER-BERYLLIUM ALLOY@ MECHANICAL TUBING 98Cu - 1.9Be Solution and Precipitation Heat Treated (TF00@ Formerly AT) (UNS C17200)
SAE AMS4533-1991 COPPER-BERYLLIUM ALLOY BARS AND RODS 98Cu - 1.9Be Solution and Precipitation Heat Treated (TF00@ Formerly AT) (UNS C17200)
SAE AMS4533A-1994 Copper-Beryllium Alloy Bars and Rods 98Cu - 1.9Be Solution and Precipitation Heat Treated (TF00@ Formerly AT) (UNS C17200)
SAE AMS4676F-2017 Nickel-Copper Alloy@ Corrosion-Resistant@ Bars and Forgings 66.5Ni - 3.0Al - 0.62Ti - 28Cu Hot-Finished@ Precipitation Hardenable (UNS N05500)
SAE AMS4676D-1996 Nickel-Copper Alloy@ Corrosion Resistant@ Bars and Forgings 66.5Ni - 3.0Al - 0.62Ti - 28Cu Hot-Finished Precipitation Hardenable (UNS N05500)

United States Navy

NAVY MIL-P-18317-1954 PLATING, BLACK NICKEL (ELECTRODEPOSITED) ON BRASS, BRONZE, OR STEEL
NAVY A-A-59009-1997 STRAINERS, SEDIMENT, PIPELINE, SELF-CLEANING

SCC

AWWA WQTC69322 Impact of Water Chemistry on Synthetically Precipitated Copper Particles
AWWA ACE63154 The Solubility and Surface Chemistry of Freshly Precipitated Copper Solids
AWWA WQTC63966 Precipitate Formation in the Distribution System Following Addition of Orthophosphate
BS 2B 33:2001 Copper-beryllium alloy wire and springs (solution treated and precipitation treated)
DANSK DS/EN 16196:2012 Fertilizers - Manganimetric determination of extracted calcium following precipitation in the form of oxalate
AENOR UNE 48065:1960 PRECIPITATED BARIUM CARBONATE
NS-EN 16196:2012 Fertilizers - Manganimetric determination of extracted calcium following precipitation in the form of oxalate
09/30181211 DC BS 3B 33. Specification for copper-beryllium alloy wire (solution treated and precipitation treated)
12/30259720 DC BS EN 16196. Fertilizers. Manganimetric determination of extracted calcium following precipitation in the form of oxalate
SN-CEN/TS 16196:2011 Fertilizers — Manganimetric determination of extracted calcium following precipitation in the form of oxalate
BS 2B 28:2001 Copper-beryllium alloy strip, foil and parts (solution treated and precipitation treated)
AWWA 51496 Role of Aluminosilicate Deposits in Lead and Copper Corrosion
AWWA MTC64568 Integrated Reverse Osmosis and Chemical Precipitation for High-Recovery Surface Water Desalting
BS B 33:1991 Specification for copper-beryllium alloy wire and springs (solution treated (W) and precipitated)
DIN EN 16196 E:2012 Draft Document - Fertilizers - Manganimetric determination of extracted calcium following precipitation in the form of oxalate; German version FprEN 16196:2012
09/30181209 DC BS 3B 32. Specification for copper-beryllium alloy rods and sections (solution treated and precipitation treated)
BS B 32:1991 Specification for copper-beryllium alloy rods, sections and parts (solution treated (W) and precipitated)
09/30181201 DC BS 3B 28. Specification for copper-beryllium alloy strip and foil (solution treated and precipitation treated)
BS B 28:1991 Specification for copper-beryllium alloy strip, foil and parts (solution treated (W) and precipitated)
AWWA JAW55362 Journal AWWA — Role of Aluminosilicate Deposits in Lead and Copper Corrosion
BS 2B 26:2001 Copper-nickel-silicon alloy rods, sections and parts (solution treated, cold worked and precipitation treated)
BS L73:1952 Aluminium-coated aluminium-copper-magnesium-silicon-manganese alloy sheets and strips - Solution treated and precipitation treated
MIL MIL-DTL-7965H-2015 Antenna Components: Antiprecipitation Static
AS N60S:1970 Sediment standards for acid casein
ANSI Z21.79-1997 Gas Appliance Sediment Traps
NS 9048:1981 Sodium hydroxide for industrial use — Determination of silica content — Gravimetric method by precipitation of quinoline molybdosilicate
BS 2S 144:1976 Specification for chromium-nickel-copper-molybdenum corrosion-resisting steel (precipitation hardening) billets, bars, forgings and parts (1130-1330 MPa)
BS 3S144:1995 Specification for Chronium-Nickel-Copper-Molybdenum Corrosion Resisting Steel (Precipitation Hardening) Billets, Bars, Forgings and Parts (1130-1330 MPa)
BS B 31:1991 Specification for copper-beryllium alloy strip, foil and parts (solution treated, cold rolled: full hard (W(H)) and precipitated)

British Standards Institution (BSI)

BS DD CEN/TS 16196:2011 Fertilizers. Manganimetric determination of extracted calcium following precipitation in the form of oxalate
2HC 102-1990 Specification for precipitation hardening chromium-nickel-copper-molybdenum steel castings (1250 MPa) (Cr 14.0, Ni 4.5, Cu 2.5, Mo 1.5)
BS 3B 33:2009 Specification for copper-beryllium alloy wire(solution treated and precipitation treated)
BS HC 106:1974 Specification for precipitaton hardening chromium-nickel-copper corrosion-resisting steel castings (1250-1500 MPa) (Cr 16, Ni 4, Cu 3)
DD CEN/TS 16196:2011 Fertilizers. Manganimetric determination of extracted calcium following precipitation in the form of oxalate
BS 3B 28:2009 Specification for copper-beryllium alloy strip and foil (solution treated and precipitation treated)
BS 2B 32:2001 Copper-beryllium alloy rods, sections and parts (solution treated and precipitation treated)
BS 3L 63:1971 Specification for tube of aluminium-copper-mangesium-silicon-manganese alloy (solution treated and precipitation treated) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8)
BS MA 46:1973 Specification for cast iron mudboxes
BS S 533:1969 Specification for chromium-nickel-copper-molybdenum corrosion-resisting steel sheet and strip (precipitation hardening: 1180/1370 MPa)
BS S 532:1969 Specification for chromium-nickel-copper-molybdenum corrosion-resisting steel sheet and strip (precipitation hardening: 980/1180 MPa)
BS 2HC 102:1990 Specification for precipitation hardening chromium-nickel-copper-molybdenum steel castings (1250 MPa) (Cr 14. 0, Ni 4.5, Cu 2.5, Mo 1.5)
BS 2HC 101:1989+A3:2013 Specification for precipitation hardening chromium-nickel-copper-molybdenum steel castings (950 MPa) (Cr 14.0, Ni 4.5, Cu 2.5, Mo 1.5)
BS 2HC 102:1989+A3:2013 Specification for precipitation hardening chromium-nickel-copper-molybdenum steel castings (1250 MPa) (Cr 14. 0, Ni 4.5, Cu 2.5, Mo 1.5)
BS 3S 144:1995 Specification for chromium-nickel-copper-molybdenum corrosion resisting steel (precipitation hardening) billets, bars, forgings and parts (1130-1330 MPa)
BS 2B 31:2001 Copper-beryllium alloy strip, foil and parts (solution treated, cold rolled: full hard and precipitation treated)
BS 2HC 102:1989 Specification for precipitation hardening chromium-nickel-copper-molybdenum steel castings (1250 MPa) (Cr 14.0 , Ni 4.5, Cu 2.5, Mo 1.5)
BS 2B 30:2001 Copper-beryllium alloy strip, foil and parts (solution treated, cold rolled: half hard and precipitation treated)
BS 2HC 101:1990 Specification for precipitation hardening chromium-nickel-copper-molybdenum steel castings (950 MPa) (Cr 14.0, Ni 4.5, Cu 2.5, Mo 1.5)
BS 2HC 101:1989 Specification for precipitation hardening chromium-nickel-copper-molybdenum steel castings (950 MPa) (Cr 14.0, Ni 4.5, Cu 2.5, Mo 1.5)
BS 3B 30:2009 Specification for copper-beryllium alloy strip and foil (solution treated, cold rolled: half hard and precipitation treated)
BS 2S 143:1976(2001) Specification for Chromium - nickel - copper - molybdenum corrosion - resisting steel (precipitation hardening) billets, forgings and parts (93 & 1080 MPa)
BS 3S 145:1996 Specification for chromium-nickel-copper-molybdenum corrosion resisting steel (precipitation hardening) billets, bars, forgings and parts (1270 MPa to 1470 MPa)
BS 2S 143:1976 Specification for chromium-nickel-copper-molybdenum corrosion-resisting steel (precipitation hardening) billets, bars, forgings and parts (930-1080 MPa)
BS 3L 51:1970 Specification for ingots and castings of aluminium-silicon-copper-iron-nickel-magnesium alloy (precipitation treated) (Si 2.5, Cu 1.2, Fe 1, Ni 1, Mg 0.1)
BS 3B 29:2009 Specification for copper-beryllium alloy strip and foil (solution treated, cold rolled: quarter hard and precipitation treated)
BS 3B 31:2009 Specification for copper-beryllium alloy strip and foil (solution treated, cold rolled: full hard and precipitation treated)
BS 3S 144:1995+A2:2015 Specification for chromium-nickel-copper-molybdenum corrosion resisting steel (precipitation hardening) billets, bars, forgings and parts (1130-1330 MPa)
BS 2L 77:1971 Specification for forging stock and forgings of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and precipitation treated) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8)

FI-SFS

SFS 4445-1979 Metal plating. Electrolytic precipitate material iron or steel copper nickel chromium

ES-AENOR

UNE 48 094 Dry oil deposits
UNE 48 065 Precipitated barium sulfate
INTA 15 03 11 The number of lubricating oil deposits
UNE 48 063 Fixed white (precipitated barium sulfate)

U.S. Military Regulations and Norms

ARMY MS35957 REV A-1974 TEST GLASS, SEDIMENTATION
ARMY MIL-HDBK-1884-1998 COATING, PLASMA SPRAY DEPOSITION
ARMY MIL-PRF-13789 E-1999 STRAINERS, SEDIMENT: PIPELINE, BASKET TYPE

Association Francaise de Normalisation

NF EN 16196:2013 Engrais - Dosage manganimétrique du calcium extrait après précipitation sous forme d'oxalate
NF T45-007:1987 Silica, precipitated, hydrated.
NF X33-027-2*NF EN 14702-2:2006 Characterisation of sludges - Settling properties - Part 2 : determination of thickenability.
NF T30-309*NF EN ISO 21545:2020 Paints and varnishes - Determination of settling
NF T20-384:1977 Potassium hydroxide for industrial use. Determination of silica content. Gravimetric method by precipitation of quinoline molybdosilicate.
NF A91-092-3:1989 Metallic coatings. Test methods for electrodeposited silver and silver alloy coatings. Part 3 : determination of the presence of residual salts.
NF T90-339-1:2010 Water quality - Determination of the toxicity of fresh water sediments to Chironomous riparius - Part 1 : natural sediments

Danish Standards Foundation

DS/EN 16196:2013 Fertilizers - Manganimetric determination of extracted calcium following precipitation in the form of oxalate
DS 233/Ret. 1:2012 Water quality - Settleable matter
DS 233:2007 Water quality - Settleable matter

German Institute for Standardization

DIN EN 16196:2013-01 Fertilizers - Manganimetric determination of extracted calcium following precipitation in the form of oxalate; German version EN 16196:2012

HU-MSZT

MSZ 2838-1978 Precipitated barium sulfate
MNOSZ 20526-1956 Precipitated calcium carbonate for industrial use
MSZ 16041/4-1978 digital distribution static sedimentation
MSZ 9650/14.lap-1965 Paint testing. Sediment detection

Lithuanian Standards Office

LST EN 16196-2013 Fertilizers - Manganimetric determination of extracted calcium following precipitation in the form of oxalate

European Committee for Standardization (CEN)

EN 16196:2012 Fertilizers - Manganimetric determination of extracted calcium following precipitation in the form of oxalate
PD CEN/TS 16196:2011 Fertilizers - Manganimetric determination of extracted calcium following precipitation in the form of oxalate

AENOR

UNE-EN 16196:2013 Fertilizers - Manganimetric determination of extracted calcium following precipitation in the form of oxalate
UNE 48094:1961 SEDIMENTS IN DRYING OILS

IN-BIS

IS 3741-1980 Sedimentation tube specifications
IS 3205-1984 Technical specifications for precipitated barium carbonate

RU-GOST R

GOST 27866-1988 High purity substances. Method for concentration of microimpurities by preciritation and copreciditation
GOST 8253-1979 Calcium carbonate precipitated. Specifications

GOSTR

GOST 27866-2019 High purity substances. Method for concentration of microimpurities by precipitation and coprecipitation

Society of Automotive Engineers (SAE)

SAE AMS4533D-2013 Copper-Beryllium Alloy, Bars and Rods 98Cu 1.9Be Solution and Precipitation Heat Treated (TF00, formerly AT)
SAE AMS4533C-2009 Copper-Beryllium Alloy, Bars and Rods 98Cu 1.9Be Solution and Precipitation Heat Treated (TF00, formerly AT)
SAE AMS2423D-2002 Plating, Nickel Hard Deposit
SAE AMS2423D-2009 Plating, Nickel Hard Deposit
SAE AMS4511-1994 COPPER-BERYLLIUM ALLOY CASTINGS 97Cu - 2.1Be - 0.52(Co + Ni) - 0.28Si Solution and Precipitation Heat Treated (TF00)
SAE AMS4511-1989 Copper-Beryllium Alloy Castings, 97Cu 2.1Be 0.52(Co + Ni) 0.28Si, Solution and Precipitation Heat Treated (TF00) (Reaffirmed: 01 Apr 1994)
SAE AMS4511A-2012 Copper-Beryllium Alloy Castings 97Cu - 2.1Be - 0.52(Co + Ni) - 0.28Si Solution and Precipitation Heat Treated (TFOO)
SAE AMS2406M-2012 Plating, Chromium Hard Deposit
SAE AMS4535C-2012 Copper-Beryllium Alloy, Mechanical Tubing 98Cu - 1.9Be Solution and Precipitation Heat Treated (TF00, formerly AT)
SAE AMS4676E-2008 Nickel-Copper Alloy, Corrosion-Resistant, Bars and Forgings 66.5Ni - 3.0Al - 0.62Ti - 28Cu Hot-Finished, Precipitation Hardenable
SAE AMS4676F-2022 Nickel-Copper Alloy, Corrosion-Resistant, Bars and Forgings 66.5Ni - 3.0Al - 0.62Ti - 28Cu Hot-Finished, Precipitation Hardenable
SAE AMS4535C-2003 Copper-Beryllium Alloy, Mechanical Tubing 98Cu - 1.9Be Solution and Precipitation Heat Treated (TF00, formerly AT) UNS C17200
SAE AMS4535E-2022 Copper-Beryllium Alloy, Mechanical Tubing 98Cu - 1.9Be Solution and Precipitation Heat Treated (TF00, formerly AT)
SAE AMS4535D-2015 Copper-Beryllium Alloy@ Mechanical Tubing 98Cu - 1.9Be Solution and Precipitation Heat Treated (TF00@ formerly AT) (UNS C17200)
SAE AMS4511A-2004 Copper-Beryllium Alloy Castings, 97Cu 2.1Be 0.52(Co + Ni) 0.28Si, Solution and Precipitation Heat Treated (TF00)
SAE AMS4533B-2003 Copper-Beryllium Alloy, Bars and Rods 98Cu 1.9Be Solution and Precipitation Heat Treated (TF00, formerly AT)
SAE AMS4534C-2013 Copper-Beryllium Alloy, Bars and Rods 98Cu 1.9Be Solution Heat Treated, Cold Worked, and Precipitation Heat Treated (TH04, formerly HT)

US-FCR

FCR COE EM 1110-1-4012-2001 PRECIPITATION/COAGULATION/FLOCCULATION
FCR UFGS-02 51 13-2010 PRECIPITATION/COAGULATION/FLOCCULATION WATER TREATMENT

Indonesia Standards

SNI 06-6992.5-2004 Sediment - Part 5: Test methods of copper (Cu) with acid destruction by atomic absorption spectrophotometers (AAS)
SNI 19-6737-2002 Initial calculation methods for the rate of reservoir sedimentation
SNI 03-4152-1996 Test methods for potassium in light sediment by hydrogen chloride using atomic absorption spectrophotometer apparatus

CZ-CSN

CSN 65 3397-1961 Calcium carbonate precipitated technical
CSN 65 6073-1973 Asphaltenes. Precipitation ith normál heptane
CSN 72 1127-1982 Determination of granularity of ceramics by sedimentation method
CSN 72 1565 Cast.2-1985 Testing of brick clays. Determination of the grain size by the sedimentation method

GM Europe

GME STD 5192145-1996 Steel 92145 Precipitation hardening steel St錶 92145 Utskiljningsh鋜dningsst錶
GME STD 5192147-1988 Steel 92147 Precipitation hardening steel St錶 92147 Utskiljningsh鋜dningsst錶
GME STD 5192144-1991 Steel 92144 Precipitation hardening steel St錶 92144 Utskiljningsh鋜dningsst錶
GME STD 5192178-1991 Steel 92178 Precipitation hardening steel St錶 92178 Utskiljningsh鋜dningsst錶

Korean Agency for Technology and Standards (KATS)

KS B 6335-2003(2008) Testing methods of precipitation equipments
KS B 6335-2013 Testing methods of precipitation equipments
KS I ISO 11277-2005(2015) Soil quality－Determination of particle size distribution inmineral soil material(Method by sieving and sedimentationfollowing removal of soluble salts, organic matter and carbonates)
KS M 2069-2007 Testing method for precipitation number of petroleum products
KS M 2069-1982 Testing method for precipitation number of petroleum products

Japanese Industrial Standards Committee (JISC)

JIS K 8314:1961 Lead chromate, precipitated

American Society for Testing and Materials (ASTM)

ASTM A710/A710M-02(2013) Standard Specification for Precipitationndash;Strengthened Low-Carbon Nickel-Copper-Chromium-Molybdenum-Columbium Alloy Structural Steel Plates
ASTM A710/A710M-02(2007) Standard Specification for Precipitation-Strengthened Low-Carbon Nickel-Copper-Chromium-Molybdenum-Columbium Alloy Structural Steel Plates
ASTM B865-20 Standard Specification for Precipitation Hardening Nickel-Copper-Aluminum Alloy Bar, Rod, Wire, Forgings, and Forging Stock

PL-PKN

PN BN 6191-36-1965 Testing agent. Precipitated sulfur
PN BN 6083-04-1965 Refined coal products. precipitated matter
PN BN 8090-03-1965 Long-lasting sugar products. Precipitation identification

International Federation of Trucks and Engines

NAVISTAR TMS 1036-1979 VOID - Strength Steel, Precipitation Hardening

American National Standards Institute （ANSI)

ASCE MOP 156-2023 Navigation Channel Sedimentation Solutions
ANSI/ASTM B865:1996 Specification for Precipitation Hardening Nickel-Copper-Aluminum Alloy (UNS N05500) Bar, Rod, Wire, Forgings, and Forging Stock

YU-JUS

JUS H.G8.292-1987 Reagents. Copper(ll) oxide. Determination of substances not precipitated by hydrogen sulphide. Gravi- metric method
JUS H.G8.046-1982 Reagents. Silver nitrate. Determination of substances not precipitated by hydrochloric acid. Gravimetric method