Fluid Test Equipment

Fluid Test Equipment, Total:265 items.

The international standard classification for "Fluid Test Equipment" includes: Electrical equipment of ships and of marine structures , Measurement of electrical and magnetic quantities , Energy and heat transfer engineering in general , Data communication networks , Other equipment for telecommunication systems , Telecommunication systems in general , Power stations in general .

The Chinese standard classification for "Fluid Test Equipment" includes: Electrical, observation/communication and navigation equipment for vessel in general , Electric energy measurement and load control system , Technical management , Data communication equipment , Telecommunication technical requirements and interface , Others .

National Metrological Technical Specifications of the People's Republic of China

JJF 2019-2022 Measurement Specification for Temperature Performance of Liquid Constant Temperature Testing Equipment
JJF 1882-2020 Specification of Metrology Testing for Energy Efficiency of 3.6 kV～40.5 kV Alternating Current Switchgears
JJF 1895-2021 Calibration Specification for Semiconductor Devices DC and Low Frequency Parameters Test Equipments

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 17215.211-2006 Electricity metering equipment (AC)—General requirements, tests and test conditions— Part 11: Metering equipment
GB 10292-1988 Semiconductor rectifier equipments for telecommunicat-ions
GB/T 22193-2008 Electrical installations in ships - Equipment - Semiconductor convertors
GB/T 24566-2009 Monitoring and testing for energy saving of electrolyzation and electroplating equipments

未注明发布机构

IEEE Std 2960-2023 IEEE Guide for Testing Equipment for Direct Current Electrical Energy Meters
DIN EN 1267:1999 Valves – Test of flow resistance using water as test fluid
ANSI/ASAE S303.4-2007(2012) Test Procedure for Solids-Mixing Equipment for Animal Feeds

工业和信息化部

YD/T 1540-2014 Testing methods for overvoltages and overcurrents resistibility of telecommunication equiqments
YD/T 4142-2022 Test specification for network aggregation and distribution device
JB/T 14252-2022 Electricity metering equipment (AC) —Field measuring instruments—General technical specifications

Professional Standard - Electron

SJ/T 11820-2022 Technology requirements and test methods for discrete semiconductor DC parameters test instruments

Professional Standard - Energy

NB/T 11071-2023 Guide for test of AC solid-insulation enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV
NB/T 11051-2023 Technical specification for HVDC protection test equipment

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 17215.211-2021 Electricity metering equipment(AC)—General requirements, tests and test conditions—Part 11：Metering equipment

Professional Standard - Post and Telecommunication

YD/T 1387.1-2005 Testing methods of IP trunk media gateway
YD/T 1446-2006 Testing Methods for Media Gateway-ATM Trunk Media Gateway
YD 576-1992 Semiconductor rectifier equipments For telecommunications
YD/T 1540-2006 Testing Methods for Overvolatages and Overcurrents Resistibility of Telecommunication Equipments
YD/T 1387.3-2005 Testing methods of media gateway equipment-integrated access media gateway

Group Standards of the People's Republic of China

T/CIET 20-2023 DC motor air tightness automatic test equipment
T/ZZB Q041-2022 Mixed signal semiconductor device test equipment
T/ZACA 041-2022 Mixed signal semiconductor device test equipment
T/CAIA YQ002-2016 Testing Method of Micro-Flow Liquid
T/CERS 0002-2018 Alternating-current metal-enclosed switchgear and controlgear for rated voltages above 3.6kV and up to and including 40.5kV （Environment-friendly gas）

Professional Standard - Electricity

DL/T 377-2010 The acceptance tests of high voltage direct current equipment
DL/T 1074-2007 Integrated uninterruptible power supply equipment of DC and AC for power system
DL/T 274-2012 Hand-over test of ±800kV HVDC electric equipments

Professional Standard - Aviation

HB 6167.9-1989 Environmental conditions and test methods for airborne equipment of civil aircraft Fluid sensitivity test

Tianjin Provincial Standard of the People's Republic of China

DB12/T 051.22-2003 Energy saving monitoring method for rectifier equipment

BE-NBN

NBN 688 F-1966 Testing of fluid flow through air flow pressure reducing element equipment. Overview
NBN 688-1971 Testing of fluid flow through air flow pressure reducing element equipment. Overview
NBN 723 F-1967 Through the air flow pressure reducing element. Measurement of fluid flow rate by nozzle equipment
NBN 722 F-1967 Through the air flow pressure reducing element. Determination of Fluid Flow by Orifice Plate Equipment
NBN 763-F-1968 Use air flow pressure reducing element equipment to measure fluid flow. Venturi tube
NBN S 21-207-1987 Protection contre l'incendie dans les b?timents B?timents élevés Equipements thermiques et aerauliques
NBN S 21-207-1978 Fire protection in buildings - High-rise buildings Thermal and aeraulic equipment

British Standards Institution (BSI)

BS EN 60512-19-3:1998 Connectors for electronic equipment. Tests and measurements. Chemical resistance tests. Fluid resistance
BS EN 60512-11-7:2003 Connectors for electronic equipment - Tests and measurements - Flowing mixed gas corrosion test
BS 3680-7:2000 Measurement of liquid flow in open channels - Specification of equipment for the measurement of water level
BS ISO 6281:2007 Plain bearings. Testing under conditions of hydrodynamic and mixed lubrication in test rigs
BS EN 60512-11-14:2003 Connectors for electronic equipment - Tests and measurements - Climatic tests - Flowing single gas corrosion test
BS PD ISO/TR 15155-1:2018 Agricultural irrigation equipment. Test facilities for agricultural irrigation equipment. General
BS EN 60512-19-1:2010 Connectors for electronic equipment - Tests and measurements - Chemical resistance tests - Test 19a - Fluid resistance of pre-insulated crimp barrels
BS EN 62052-21:2004+A1:2017 Electricity metering equipment (a.c.). General requirements, tests and test conditions. Tariff and load control equipment
BS 3680-8H:1996 Measurement of liquid flow in open channels. Measuring instruments and equipment. Method of specifying the performance of hydrometric equipment
BS EN 60068-2-74:2000+A1:2018 Environmental testing - Tests. Test Xc: Fluid contamination
BS 7118-2:1989 Measurement of fluid flow: assessment of uncertainty in the calibration and use of flow measurement devices. Non-linear calibration relationships
BS EN 60512-5-2:2002 Connectors for electronic equipment - Tests and measurements - Current-carrying capacity tests - Test 5b - Current-temperature derating
BS EN 62052-21:2004 Electricity metering equipment (a.c.) - General requirements, tests and test conditions - Part 21: Tariff and load control equipment
BS EN 50470-1:2006+A1:2018 Electricity metering equipment (a.c.) - General requirements, tests and test conditions. Metering equipment (class indexes A, B and C)
BS 6537:1984 Specification for staple type connectors for hydraulic fluid power applications
BS EN ISO 8536-14:2018 Infusion equipment for medical use - Clamps and flow regulators for transfusion and infusion equipment without fluid contact
BS EN 62052-21:2005 Electricity metering equipment (a.c.) - General requirements, tests and test conditions - Tariff and load control equipment
19/30350319 DC BS EN IEC 62052-11. Electricity metering equipment (a.c.). General requirements, tests and test conditions. Part 11. Metering equipment
BS EN 61557-16:2015 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. Equipment for testing, measuring or monitoring of protective measures. Equipment for testing the effectiveness of the protective measures of electrical equipment and
BS EN 60861:2008 Equipment for monitoring of radionuclides in liquid effluents and surface waters
BS EN 61557-14:2013 Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d c. Equipment for testing, measuring or monitoring of protective measures. Equipment for testing the safety of electrical equipment of machinery
BS EN IEC 60512-9-5:2020 Connectors for electrical and electronic equipment. Tests and measurements - Endurance tests. Test 9e: Current loading, cyclic
BS EN 50123-7-2:1999 Railway applications - Fixed installations - d.c. switchgear - Measurement, control and protection devices for specific use in d.c. traction systems - Isolating current transducers and current measuring devices
BS EN 60747-2:2016 Semiconductor devices. Discrete devices. Rectifier diodes
BS EN ISO 15548-3:2008 Non-destructive testing - Equipment for eddy current examination - Part 3: System characteristics and verification
BS IEC 60092-304:2002 Electrical installation in ships - Equipment - Semiconductor convertors
BS EN ISO 20339:2017 Non-destructive testing. Equipment for eddy current examination. Array probe characteristics and verification
BS EN 50123-7-2:2003 Railway applications - Fixed installations - d.c. switchgear - Measurement, control and protection devices for specific use in d.c. traction systems - Isolating current transducers and other current measuring devices
BS EN ISO 10249:2000 Fluid fertilizers - Preliminary visual examination and preparation of samples for physical testing
BS EN 60512-5-1:2002 Connectors for electronic equipment - Tests and measurements - Current-carrying capacity tests - Test 5a - Temperature rise
BS 3680-8D:1980 Measurement of liquid flow in open channels. Measuring instruments and equipment. Cableway system for stream gauging

ET-QSAE

ES A.D5.100-1973 Flowmeter Liquid Fuel Measuring Equipment

GSO

BH GSO ISO/TR 11328:2016 Measurement of liquid flow in open channels -- Equipment for the measurement of discharge under ice conditions
OS GSO ISO/TR 11328:2015 Measurement of liquid flow in open channels -- Equipment for the measurement of discharge under ice conditions
GSO IEC 60512-11-14:2015 Connectors for electronic equipment - Tests and measurements - Part 11-14: Climatic tests - Test 11p: Flowing single gas corrosion test
GSO IEC 62052-11:2007 Electricity Metering Equipment (AC) - General Requirements Tests and Test Conditions Part II: Metering Equipment
GSO IEC 60512-11-7:2015 Connectors for electronic equipment - Tests and measurements - Part 11-7: Climatic tests - Test 11g: Flowing mixed gas corrosion test
BH GSO IEC 60512-11-14:2016 Connectors for electronic equipment - Tests and measurements - Part 11-14: Climatic tests - Test 11p: Flowing single gas corrosion test
BH GSO IEC 61557-14:2022 Electrical safety in low voltage distribution systems up to 1 000 V a.c and 1 500 V d.c - Equipment for testing,measuring or monitoring of protective measures - Part 14: Equipment for testing the safety of electrical equipment for machinery
GSO IEC 61557-14:2021 Electrical safety in low voltage distribution systems up to 1 000 V a.c and 1 500 V d.c - Equipment for testing,measuring or monitoring of protective measures - Part 14: Equipment for testing the safety of electrical equipment for machinery
OS GSO IEC 60512-19-1:2013 Connectors for electronic equipment - Tests and measurements - Part 19-1: Chemical resistance tests - Test 19a: Fluid resistance of pre-insulated crimp barrels
BH GSO IEC 60512-5-2:2016 Connectors for electronic equipment - Tests and measurements - Part 5-2: Current-carrying capacity tests - Test 5b: Current-temperature derating
GSO IEC 60512-5-2:2015 Connectors for electronic equipment - Tests and measurements - Part 5-2: Current-carrying capacity tests - Test 5b: Current-temperature derating
OS GSO IEC 61557-16:2017 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c - Equipment for testing, measuring or monitoring of protective measures - Part 16: Equipment for testing the effectiveness of the protective measures of electrical eq
GSO IEC 61557-16:2017 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c - Equipment for testing, measuring or monitoring of protective measures - Part 16: Equipment for testing the effectiveness of the protective measures of electrical eq
GSO IEC 60512-19-1:2013 Connectors for electronic equipment - Tests and measurements - Part 19-1: Chemical resistance tests - Test 19a: Fluid resistance of pre-insulated crimp barrels
BH GSO IEC 60512-19-3:2016 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 19: Chemical resistance tests - Section 3: Test 19c - Fluid resistance
GSO IEC 60512-19-3:2015 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 19: Chemical resistance tests - Section 3: Test 19c - Fluid resistance
BH GSO IEC 60512-5-1:2016 Connectors for electronic equipment - Tests and measurements - Part 5-1: Current-carrying capacity tests - Test 5a: Temperature rise
OS GSO IEC 60512-5-1:2015 Connectors for electronic equipment - Tests and measurements - Part 5-1: Current-carrying capacity tests - Test 5a: Temperature rise
GSO ISO 11655:2015 Measurement of liquid flow in open channels -- Method of specifying performance of hydrometric equipment
BH GSO ISO 11655:2016 Measurement of liquid flow in open channels -- Method of specifying performance of hydrometric equipment
OS GSO ISO 11655:2015 Measurement of liquid flow in open channels -- Method of specifying performance of hydrometric equipment
GSO IEC 60512-5-1:2015 Connectors for electronic equipment - Tests and measurements - Part 5-1: Current-carrying capacity tests - Test 5a: Temperature rise

CZ-CSN

CSN 35 8742-1973 Semiconductor devices. Transistors. Measurement of cut-oíf currents
CSN 35 8762-1973 Semiconductor devices. Phototransistors photodiodes. Measurement of dark current
CSN 35 8761-1973 Semiconductor devices. Phototransistors photodíodes. Measurement of photoelectric current
CSN 35 8731-1975 Semiconductor devices. Diodes Measurement of d. c. forward voltage
CSN IEC 233:1994 Tests on hollow insulators for use in electrical equipment
CSN 35 4055 Cast.13-1984 Electromechanical components for electronic equipment. Current - temperature derating test
CSN IEC 749:1994 Semiconductor devices.Mechanical and climatic test methods

VDE - VDE Verlag GmbH@ Berlin@ Germany

VDE 0404-4-2005 Testing and measuring equipment for testing the electrical safety of electrical devices - Part 4: Handheld and manually operated current clamps/sensors for measurement of protectives conductor currents and touch currents of electrical devices
VDE 0418-11/A1-2016 Electricity metering equipment (AC) - General requirements@ tests and test conditions - Part 11: Metering equipment (IEC 13/1625/CDV:2015); German version EN 62052-11:2003/FprA1:2015
VDE 0413-16-2015 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing@ measuring or monitoring of protective measures - Part 16: Equipment for testing the effectiveness of the protective measures of electrical e
VDE 0413-14-2014 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing@ measuring or monitoring of protective measures - Part 14: Equipment for testing the safety of electrical equipment of machinery (IEC 61557-1

SCC

BS EN 60512-11-7:1997 Connectors for electronic equipment. Tests and measurements. Climatic tests-Test 11g. Flowing mixed gas corrosion test
BS EN 60512-11-14:1997 Connectors for electronic equipment. Tests and measurements. Climatic tests-Test 11p. Flowing single gas corrosion test
BS 4417:1969 Specification for semiconductor rectifier equipments
DANSK DS/EN 60512-11-7:2003 Connectors for electronic equipment - Tests and measurements - Part 11-7: Climatic tests - Test 11g: Flowing mixed gas corrosion test
BS 3680-8B:1973 Measurement of liquid flow in open channels. Measuring instruments and equipment. Recommendations for direct depth sounding and suspension equipment
DANSK DS/EN 61557-14:2013 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 14: Equipment for testing the safety of electrical equipment of machinery
CEI EN 61557-14:2014 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures Part 14: Equipment for testing the safety of electrical equipment of machinery
UNE 21724-3:1991 EQUIPMENT FOR CONTINUOUSLY MONITORING RADIOACTIVITY IN GASEOUS EFFLUENTS. SPECIFIC REQUIREMENTS FOR NOBLE GAS EFFLUENT MONITORS.
CEI EN 60512-5-2:2003 Connectors for electronic equipment - Tests and measurements - Part 5-2: Current-carrying capacity tests - Test 5b: Current-temperature derating
DANSK DS/ISO 24667:2022 Sports and recreational facilities – Impact surfacing testing device
CEI EN 60512-19-1:2011 Connectors for electronic equipment - Tests and measurements Part 19-1: Chemical resistance tests - Test 19a: Fluid resistance of preinsulated crimp barrels
DANSK DS/EN 60512-19-1:2010 Connectors for electronic equipment - Tests and measurements - Part 19-1: Chemical resistance tests - Test 19a: Fluid resistance of pre-insulated crimp barrels
BS 3680-8A:1973 Measurement of liquid flow in open channels. Measuring instruments and equipment-Current meters incorporating a rotating element
BS IEC 60861:2006 Equipment for monitoring of radionuclides in liquid effluents and surface waters
CEI EN 60861:2009 Equipment for monitoring of radionuclides in liquid effluents and surface waters
DANSK DS/EN 60861:2008 Equipment for monitoring of radionuclides in liquid effluents and surface waters
BS IEC 60761-5:2002 Equipment for continuous monitoring of radioactivity in gaseous effluents. Specific requirements for tritium monitors
UNE 21724-1:1990 EQUIPMENT FOR CONTINUOSLY MONITORING RADIOACTIVITY IN GASEOUS EFFLUENTS. GENERAL REQUIREMENTS.
UNE-EN 60512-11-7:1997 ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT. BASIC TESTING PROCEDURES AND MEASURING METHODS. PART 11: CLIMATIC TESTS. SECTION 7: TEST 11G: FLOWING MIXED GAS CORROSION TEST.
DANSK DS/EN 60512-11-14:2003 Connectors for electronic equipment - Tests and measurements - Part 11-14: Climatic tests - Test 11p: Flowing single gas corrosion test
CEI EN 60512-11-14:2004 Connectors for electronic equipment - Tests and measurements - Part 11-14: Climatic tests - Test 11p: Flowing single gas corrosion test
UNE-EN 60512-11-14:1999 ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT - BASIC TESTING PROCEDURES AND MEASURING METHODS. PART 11: CLIMATIC TESTS. SECTION 14: TEST 11P. FLOWING SINGLE GAS CORROSION TEST.
CEI EN 60512-11-7:2004 Connectors for electronic equipment - Tests and measurements - Part 11- 7: Climatic tests - Test 11g: Flowing mixed gas corrosion test
DANSK DS/EN 60512-5-1:2002 Connectors for electronic equipment - Tests and measurements - Part 5-1: Current-carrying capacity tests - Test 5a: Temperature rise
CEI EN 60512-5-1:2003 Connectors for electronic equipment - Tests and measurements - Part 5-1: Current-carrying capacity tests - Test 5a: Temperature rise
UNE-EN 1267:2000 VALVES - TEST OF FLOW RESISTANCE USING WATER AS TEST FLUID.
DIN 18866 E:2021 Draft Document - Equipment for commercial kitchens - Convection ovens and convection steamers - Requirements and testing

YU-JUS

JUS M.E4.023-1998 Flowsheets ofproccss plants - Graphical symbols
JUS N.S5.005-1982 Continuour leakage current testing of medical electrical eguipment and accessories

Association Francaise de Normalisation

NF EN 437:2021 Gaz d'essais - Pressions d'essais - Catégories d'appareils
NF EN 60512-11-7:2003 Connectors for electronic equipment - Tests and measurements - Part 11-7: climatic tests - Test 11g: corrosion test in a gas mixture flow
NF X10-325:1986 Liquid flow measurement in open channels. Direct depth sounding and suspension equipment.
NF C44-052-11*NF EN 62052-11:2003 Electricity metering equipment (AC) - General requirements, tests and test conditions - Part 11 : metering equipment
NF EN 1267:2012 Industrial valves - Flow resistance test using water as test fluid
NF EN 60512-19-1:2011 Connectors for electronic equipment - Tests and measurements - Part 19-1: chemical resistance tests - Test 19a: fluid resistance of pre-insulated crimp terminals
NF C93-400-11-14*NF EN 60512-11-14:2006 Connectors for electronic equipment - Tests and measurements - Part 11-14 : climatic tests - Test 11p : flowing single gas corrosion test
NF A09-170-2:2008 Non-destructive testing - Equipment for eddy current examination - Part 2 : probe characteristics and verification.
NF L51-510:1962 Appareillage électrique pour aéronefs - Détecteurs de surintensité pour courant alternatif.
NF EN 60861:2008 Equipment for monitoring radionuclides in liquid effluents and surface waters
NF EN 60512-5-1:2002 Connectors for electronic equipment - Tests and measurements - Part 5-1: limit current tests: Test 5a: temperature rise
NF C93-400-11-7*NF EN 60512-11-7:2003 Connectors for electronic equipment - Tests and measurements - Part 11-7 : climatic tests - Test 11g : flowing mixed gas corrosion test
NF EN 60512-11-14:2006 Connectors for electronic equipment - Tests and measurements - Part 11-14: climatic tests - Test 11p: corrosion test in the flow of a gas

IN-BIS

IS 12346-1988 Specification for AC energy meter test equipment
IS 3136-1965 Polycrystalline Semiconductor Rectifier Equipment Specification
IS 12761 Pt.3-1989 Equipment for continuous monitoring of radioactivity in gas effluents Part 3 Specific requirements for inert gas effluent monitors
IS 6619-1972 Safety Specifications for Semiconductor Rectifier Equipment
IS 12761 Pt.2-1989 Equipment for continuous monitoring of radioactivity in gas effluents Part 2 Specific requirements for aerosol effluent monitors

VDI - Verein Deutscher Ingenieure

VDI 3672-1972 STAUBMESSUNGEN IN STROeMENDEN GASEM. REGISTRIERENDE MEss- EINRICHTUNGEN@ PHOTOELELTRISCHE MEssGERAeTE@ KALIBRIERUNG

Danish Standards Foundation

DS/EN 437:2021 Test gases – Test pressures – Appliance categories
DS/EN 60512-19-1:2010 Connectors for electronic equipment - Tests and measurements - Part 19-1: Chemical resistance tests - Test 19a: Fluid resistance of pre-insulated crimp barrels
DS/EN 60861:2008 Equipment for monitoring of radionuclides in liquid effluents and surface waters
DS/EN 60512-11-7:2003 Connectors for electronic equipment - Tests and measurements - Part 11-7: Climatic tests - Test 11g: Flowing mixed gas corrosion test
DS/EN 60512-11-14:2004 Connectors for electronic equipment - Tests and measurements - Part 11-14: Climatic tests - Test 11p: Flowing single gas corrosion test
DS/EN 60512-19-3:1998 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 19: Chemical resistance tests - Section 3: Test 19c - Fluid resistance
DS/IEC 92-304:1994 Electrical installations in ships - Part 304: Equipment - Semiconductor converters

ES-UNE

IEEE 2960-2023 IEEE Guide for Testing Equipment for Direct Current Electrical Energy Meters
UNE-EN 61557-14:2013 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 14: Equipment for testing the safety of electrical equipment of machinery (Endorsed...
UNE-EN 60512-19-1:2010 Connectors for electronic equipment - Tests and measurements -- Part 19-1: Chemical resistance tests - Test 19a: Fluid resistance of pre-insulated crimp barrels (Endorsed by AENOR in September of 2010.)

Indonesia Standards

SNI 13-7123-2005 The criteria of fluid flow test equipment for geothermal wells
SNI 13-6987-2004 Geothermal well fluid - Flow test procedures
SNI 13-6677-2002 Reporting of geothermal wells fluid flow test
SNI 13-6605-2001 Test methods for fluid flow geothermal wells
SNI 19-4197-1996 Measurement of water flow in close conduit - Meters for cold potable water - Part 3 : Equipment and test method

German Institute for Standardization

DIN EN 60512-11-14:2004-06 Connectors for electronic equipment - Tests and measurements - Part 11-14: Climatic tests - Test 11p: Flowing single gas corrosion test (IEC 60512-11-14:2003); German version EN 60512-11-14:2003 / Note: DIN EN 60512-11-14 (1997-06) remains valid alongs...
DIN EN 60512-11-7:2004-06 Connectors for electronic equipment - Tests and measurements - Part 11-7: Climatic tests - Test 11g: Flowing mixed gas corrosion test (IEC 60512-11-7:2003); German version EN 60512-11-7:2003 / Note: DIN EN 60512-11-7 (1996-08) remains valid alongside t...
DIN 18866:2022-10 Equipment for commercial kitchens - Convection ovens and convection steamers - Requirements and testing / Note: DIN 18866 (2018-08) remains valid alongside this standard until 2023-03-31.
DIN EN 60512-11-14:2004 Connectors for electronic equipment - Tests and measurements - Part 11-14: Climatic tests - Test 11p: Flowing single gas corrosion test (IEC 60512-11-14:2003); German version EN 60512-11-14:2003
DIN EN 60512-11-7:2004 Connectors for electronic equipment - Tests and measurements - Part 11-7: Climatic tests - Test 11g: Flowing mixed gas corrosion test (IEC 60512-11-7:2003); German version EN 60512-11-7:2003
DIN 51522:1998-11 Heat transfer fluids Q - Specifications, test
DIN EN 60512-5-1 Berichtigung 1:2015-06 Connectors for electronic equipment - Tests and measurements - Part 5-1: Current-carrying capacity tests -Test 5a: Temperature rise (IEC 60512-5-1:2002); German version EN 60512-5-1:2002, Corrigendum to DIN EN 60512-5-1:2003-01
DIN EN 60512-5-2:2003-01 Connectors for electronic equipment - Tests and measurements - Part 5-2: Current-carrying capacity tests; Test 5b: Current-temperature derating (IEC 60512-5-2:2002); German version EN 60512-5-2:2002 / Note: DIN IEC 60512-3 (1994-05) remains valid along...

International Electrotechnical Commission (IEC)

IEC 62052-11:2003/AMD1:2016 Electricity metering equipment (a.c.) - General requirements, tests and test conditions - Part 11: Metering equipment; Amendment 1
IEC 62052-11:2003 Electricity metering equipment (AC) - General requirements, tests and test conditions - Part 11: Metering equipment
IEC 60512-11-14:2003 Connectors for electronic equipment - Tests and measurements - Part 11-14: Climatic tests; Test 11p: Flowing single gas corrosion test
IEC 61557-14:2013 Electrical safety in low voltage distribution systems up to 1000 V a.c and 1500 V d.c - Equipment for testing, measuring or monitoring of protective measures - Part 14: Equipment for testing the safety of electrical equipment for machinery

US-FCR

FCR COE RPMAS 51250-1978 FLOW MEASUREMENT DEVICES
FCR FED FCGS 13625-1978 FLOW MEASURING EQUIPMENT

PL-PKN

PN T06500-04-1985 Electronic measuring equipments Specifying parameters Tests

Korean Agency for Technology and Standards (KATS)

KS C IEC 62052-11:2005 Electricity metering equipments(a.c)－General requirements, tests and test conditions－Part 11：Metering equipment
KS C 7027-2011 DC power supply for multimedia players
KS C IEC 60861-2012(2022) Equipment for monitoring of radionuclides in liquid effluents and surface waters
KS C IEC 60861-2022 Equipment for monitoring of radionuclides in liquid effluents and surface waters
KS C IEC 60512-19-3-2014 Electromechanical components for electronic equipment－Basic testing procedures and measuring methods－Part 19：Chemical resistance tests－Section 3：Test 19c－Fluid resistance
KS C IEC 62052-21-2022 Electricity metering equipment (a.c.) ― General requirements, tests and test conditions ― Part 21: Tariff and load control equipment
KS C IEC 60512-3:2002 Electromechanical components for electronic equipment-Basic testing procedures and measuring methods-Part 3:Current-carrying capacity tests
KS C IEC 60512-3:2014 Electromechanical components for electronic equipment－Basic testing procedures and measuring methods－Part 3：Current－carrying capacity tests
KS C IEC 60119-2019 Recommendations for polycrystalline semiconductor rectifier stacks and equipments

RU-GOST R

GOST 31343-2007 Machines and equipment for processing and decontamination of a fluid manure. Test methods
GOST R 50820-1995 Scrubber and duster equipment. Methods of determination of dust load of gas-and-dust streams

Japanese Industrial Standards Committee (JISC)

JIS S 3200-4:1997 Equipment for water supply service -- Test method of prevention from back current
JIS C 5402-19-3:2002 Connectors for electronic equipment -- Tests and measurements -- Part 19-3: Chemical resistance tests -- Test 19c: Fluid resistance
JIS C 5402-11-7:2006 Connectors for electronic equipment -- Tests and measurements -- Part 11-7: Climatic tests -- Test 11g: Flowing mixed gas corrosion test
JIS C 5402-11-7:2002 Connectors for electronic equipment -- Tests and measurements -- Part 11-7: Climatic tests -- Test 11g: Flowing mixed gas corrosion test
JIS C 5402-11-14:2006 Connectors for electronic equipment -- Tests and measurements -- Part 11-14: Climatic tests -- Test 11p: Flowing single gas corrosion test
JIS C 5402-11-14:2002 Connectors for electronic equipment -- Tests and measurements -- Part 11-14: Climatic tests -- Test 11p: Flowing single gas corrosion test

RO-ASRO

STAS R 12007/1-1981 EQUIPMENT RELIABILITY TESTING General requirements
STAS 6693/2-1975 Semiconductor devices TRANSISTORS Methods for measuring electrical properties
STAS 12716-1989 EQUIPMENT FOR CONTINUO- USLY MONITORING RADIO- ACTIVITY IN GASEOUS ' EFFLUENTS General requirements
STAS 11115/11-1992 Environmental condition and test procedures for airborne equipment. Section 11: Fluids susceptibility

FI-SFS

SFS 5493-1989 Equipment reliability testing. total requirements
SFS 3381-1975 AC meter. Electrical testing equipment
SFS 3382-1975 AC meter. Operating equipment and remote measurement equipment

NEMA - National Electrical Manufacturers Association

NEMA RI 6-1959 ELECTROCHEMICAL PROCESSING SEMICONDUCTOR RECTIFIER EQUIPMENT

SAE - SAE International

SAE HIR1265-1974 UNDERWATER FLUID SYSTEM EQUIPMENT AND COMPONENTS
SAE AIR1155-1992 AIRBORNE MONITORING OF COMMERCIAL TRANSPORT AIRCRAFT FLUID SYSTEM AND EQUIPMENT PERFORMANCE

IEC - International Electrotechnical Commission

IEC 60512-11-7:1996 Electromechanical Components for Electronic Equipment - Basic Testing Procedures and Measuring Methods Part 11: Climatic Tests - Section 7: Test 11g: Flowing Mixed Gas Corrosion Test (Edition 1.0)

SE-SIS

SIS SS IEC 233:1984 Insulators — Tests ort hollow insulators for use in electrical equipment
SIS SS 428 91 01-1985 Portable earthing equipment for a.c- installations ?ver 1000 V- Design and testing
SIS SEN 27 06-1962 Polycrystalline semiconductor rectifier stacks and equipments
SIS SS-IEC 749:1991 Semiconductor devices - Mechanical and climatic test methods

Institute of Electrical and Electronics Engineers (IEEE)

IEEE P2960/D8, June 2022 IEEE Draft Guide for Testing Equipment for Direct Current Electrical Energy Meters
IEEE P2960/D8.1, October 2022 IEEE Apprvoved Draft Guide for Testing Equipment for Direct Current Electrical Energy Meters
IEEE P2960 IEEE Approved Draft Guide for Testing Equipment for Direct Current Electrical Energy Meters
IEEE Std C62.37/COR-2009 Errata to IEEE Standard Test Specification for Thyristor Diode Surge Protective Devices

Lithuanian Standards Office

LST EN 60512-11-14-2004 Connectors for electronic equipment. Tests and measurements. Part 11-14: Climatic tests. Test 11p: Flowing single gas corrosion test (IEC 60512-11-14:2003)
LST EN 60512-11-7-2003 Connectors for electronic equipment. Tests and measurements. Part 11- 7: Climatic tests - Test 11g: Flowing mixed gas corrosion test (IEC 60512-11-7:2003)
LST EN 60512-5-2-2003 Connectors for electronic equipment. Tests and measurements. Part 5-2: Current-carrying capacity tests. Test 5b: Current-temperature derating (IEC 60512-5-2:2002)
LST EN 60512-19-1-2010 Connectors for electronic equipment - Tests and measurements -- Part 19-1: Chemical resistance tests - Test 19a: Fluid resistance of pre-insulated crimp barrels (IEC 60512-19-1:2010)

DIN

DIN 18866:2022 Equipment for commercial kitchens - Convection ovens and convection steamers - Requirements and testing

AENOR

UNE-EN 60512-5-2:2002 Connectors for electronic equipment - Tests and measurements -- Part 5-2: Current-carrying capacity tests - Test 5b: Current-temperature derating.
UNE-EN 60512-11-7:2004 Connectors for electronic equipment - Tests and measurements -- Part 11- 7: Climatic tests - Test 11g: Flowing mixed gas corrosion test
UNE-EN 60512-11-14:2004 Connectors for electronic equipment - Tests and measurements -- Part 11-14: Climatic tests - Test 11p: Flowing single gas corrosion test
UNE-EN 60512-19-3:1999 ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT. BASIC TESTING PROCEDURES AND MEASURING METHODS. PART 19: CHEMICAL RESISTANCE TESTS. SECTION 3: TEST 19C. FLUID RESISTANCE

European Committee for Electrotechnical Standardization（CENELEC）

EN 60512-19-1:2010 Connectors for electronic equipment - Tests and measurements - Part 19-1: Chemical resistance tests - Test 19a: Fluid resistance of pre-insulated crimp barrels
EN 62052-11:2003 Electricity metering equipment (AC) General requirements, tests and test conditions Part 11: Metering equipment

Standard Association of Australia （SAA）

AS 3778.6.6:2008 Liquid flow measurement in open channels Measuring devices, instruments and equipment Cableway systems for flow measurement
AS 4362.2:1996 High-voltage test techniques for low-voltage equipment - Test equipment

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc.

ASHRAE 3868-1995 Development of a Test Facility for Airflow Measurements in Variable-Density Environments

CH-SNV

VSM 10336.10-1939 Polycrystalline semiconductor. Rules for Rectifier Columns and Equipment

API - American Petroleum Institute

API MPMS 22.1-2006 General Guidelines for Developing Testing Protocols for Devices Used in the Measurement of Hydrocarbon Fluids (First Edition)

US-AAMA

AAMA TIR-A12-2000 Airflow Through Integral Ventilating Systems/Devices

CN-QIYE

Q/GDW 118-2005 AC test procedures for secondary electrical equipment in DC converter stations
Q/GDW 111-2004 Handover test procedures for high-voltage DC electrical equipment in DC converter stations

GOST

GOST R 56433-2021 Equipment for sports games. Volleyball equipment. Requirements and test methods

CENELEC - European Committee for Electrotechnical Standardization

EN 61300-2-34:1997 Fibre Optic Interconnecting Devices and Passive Components Basic Test and Measurement Procedures Part 2-34: Tests - Resistance to Solvents and Contaminating Fluids
EN 60512-11-7:1996 Electromechanical Components for Electronic Equipment - Basic Testing Procedures and Measuring Methods - Part 11: Climatic Tests Section 7: Test 11g: Flowing Mixed Gas Corrosion Test
EN 60512-11-14:1997 Electromechanical Components for Electronic Equipment; Basic Testing Procedures and Measuring Methods; Part 11: Climatic Tests; Section 14: Test 11p - Flowing Single Gas Corrosion Test

U.S. Military Regulations and Norms

ARMY MIL-T-12681 A-1955 TEST SET, TELEPHONE (TEST SET TS-190)(/U)
ARMY MIL-T-12681 A VALID NOTICE 1-1986 TEST SET, TELEPHONE (TEST SET TS-190)(/U)
ARMY MIL-STD-1166 A-1991 RADIOGRAPHIC TESTING REQUIREMENTS FOR SOLID PROPELLANTS
ARMY MIL-T-12681 A NOTICE 2-1997 TEST SET, TELEPHONE (TEST SET TS-190)(/U)
ARMY MIL-STD-1166 A NOTICE 1-2001 RADIOGRAPHIC TESTING REQUIREMENTS FOR SOLID PROPELLANTS
ARMY MIL-PRF-49503 B (2)-2006 GENERAL STYLE AND FORMAT, TEST PROGRAM SETS FOR AUTOMATIC TEST EQUIPMENT

AT-ON

ONORM M 7850-1987 Safety devices against flashback, backflow and afterflow for gas welding equipment; requirements, tests, marking of conformity; repeated Operation tests
ONORM S 4639-1992 Gymnastic equipment - Dismount mats - Measures, safety requirements, testing
ONORM S 4637-1991 Gymnastic equipment - Landing mats - Safety requirements, testing, marking of conformity
ONORM M 1349-1997 Verification of measuring and test equipment - Testing Instruction for measuring tapes

Society of Automotive Engineers (SAE)

SAE AIR1155-1973 Airborne Monitoring of Commercial Transport Aircraft, Fluid System and Equipment Performance

American Society of Mechanical Engineers (ASME)

ASME MFC-8M-2001 Fluid Flow in Closed Conduits : Connections for Pressure Signal Transmissions Between Primary and Secondary Devices

American National Standards Institute （ANSI)

ANSI/ASME MFC-8M-2001 Fluid Flow in Closed Conduits – Connections for Pressure Signal Transmission Between Primary and Secondary Devices

AIA/NAS - Aerospace Industries Association of America Inc.

NAS810-1969 Protection of Fluid Lines and Equipment (Rev 2)

International Organization for Standardization (ISO)

ISO 4373:1995 Measurement of liquid flow in open channels - Water-level measuring devices
ISO 7440-2:1985 Road vehicles; Fuel injection equipment testing; Part 2 : Orifice plate flow measurement

JP-JEM

JEM 1429-2008 Pre-operational testing programs for a.c.power supply systems for nuclear power plants

HU-MSZT

MSZ 8607-1973 Mobile equipment, gas and water heating equipment products and testing

International Telecommunication Union (ITU)

ITU-T Q.164-1989 Test Equipment for Checking Equipment and Signals - Specifications of Signalling Systems Nos. 4 and 5 (Study Group XI) 2 pp

Aeronautical Radio Inc.

ARINC 738-3 ITEM 9.0-2001 Built-In Test Equipment (Bite)

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE)

ASHRAE 41.7-1984 Method of Test for Measurement of Flow of Gas

Electronic Components, Assemblies and Materials Association

ECA CB 5-1969 Recommended Test Procedure for Semiconductor Thermal Dissipating Devices

European Committee for Standardization (CEN)

EN ISO 8536-9:2015 Infusion equipment for medical use - Part 9: Fluid lines for single use with pressure infusion equipment

CEN - European Committee for Standardization

EN ISO 8536-9:2004 Infusion equipment for medical use - Part 9: Fluid lines for use with pressure infusion equipment