Chamber Temperature Test Strips

Chamber Temperature Test Strips, Total:99 items.

The international standard classification for "Chamber Temperature Test Strips" includes: Chemical laboratories. Laboratory equipment , Temperature-measuring instruments , Environmental testing , Energy and heat transfer engineering in general , Medical Sciences and health care facilities in general , Geology. Meteorology. Hydrology .

The Chinese standard classification for "Chamber Temperature Test Strips" includes: Basic laboratory equipment , Basic standards and general methods , Technical management , Basic standards and general methods , Medical science , Technical management , Dedicated inspection equipment , Meteorology , Meteorological instrument , Ambient conditions , Special chemical instrument and meter .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 11158-1989 Specification for high temperature test chambers
GB/T 10589-1989 Specification for low temperature test chambers
GB/T 33861-2017 Testing method of energy efficiency for temperature test chambers
GB/T 33861-2017(俄语版) Energy efficiency test method for high and low temperature test chambers
GB/T 10589-2008 Specifications for low temperature test chambers
GB/T 2424.7-2006 Environmental tests for electric and electronic products - Measurements in temperature chambers for tests A and tests B (with load)
GB/T 2424.7-2024 Environmental testing—Part 3: Supporting documentation and guidance—Measurements in temperature chambers for tests A (Cold) and B (Dry heat) (with load)
GB/T 10591-2006 Specifications for high temperature/low air pressure testing chambers
GB/T 10590-1989 Specification for low temperature/low air pressure test chambers
GB/T 33861-2017(法语版) Energy efficiency test method for high and low temperature test chambers
GB/T 10591-1989 Specification for high temperature/low air pressure test chambers
GB/T 10590-2006 Specifications for high and low temperature/low air pressure testing chambers
GB/T 10589-2008(英文版) Specifications for low temperature test chambers
GB/T 10592-1989 Specification for low/high temperature test chambers
GB/T 2424.27-2013 Environmental testing―Supporting documentation and guidance―Calculation of uncertainty of conditions in climatic test chambers
GB/T 11158-2008 Specifications for high temperature test chambers
GB/T 2424.6-2006 Environmental testing for electric and electronic products - Confirmation of the performance of temperature/humidity chambers
GB/T 2424.5-2006 Environmental tests for electric and electronic products - Confirmation of the performance of temperature chambers
GB/T 10590-2006(英文版) Specifications for high and low temperature/low air pressure testing chambers
GB/T 10592-2008 Specification for low/high temperature test chambers
GB/T 10592-2023 Specifications for high/low temperature testing chambers
GB/T 11158-2008(英文版) Specifications for high temperature test chambers

Group Standards of the People's Republic of China

T/JAR 005/1-2022 Testing method of energy efficiency for temperature shock test chamber
T/CAME 37-2021 Technical requirement of temperature and humidity real-time monitoring system for baby incubator
T/SBX 082-2023 Refrigerator thermometer calibration specifications
T/CSMT-QT001-2025 Same-city Takeout Storage and Transportation Box Temperature and Humidity Testing Specifications
T/JAR 005/2-2022 Testing method of energy efficiency for temperature shock test chamber

Professional Standard - Electron

SJ/T 10187-1991 Climate testing equipment - Series of temperature changing for test chamber(one chamber) for Type Y73
SJ 20115.2-1992 Environmental conditions and test methods for aircraft radar-Temperature/altitude test
SJ/T 10186-1991 Climate testing equipment-Series of temperature changing for test chamber(chamber)for Type Y73
SJ/T 31390-1994 Requirements of readiness and methods of inspection and assessment for temperature cycling test chambers

Professional Standard - Meteorology

QX/T 16-2002 DJM10 Calibration equipment for humidity instrument
QX/T 16-2020 Calibration chambers for temperature and humidity instrument
QX/T 163-2012 Test Method of Temperature Calibration Device for Aneroid Barometer (Barograph)

Professional Standard - Medicine

YY 91102-1999 General specifications for low-temperature chamber

Professional Standard - Aviation

HB 7122.3-1994 Verification Methods for Climatic Environment Test Box (Chamber) for Civil Craft Airborne Equipment - Temperature and Humidity Test Box (Chamber)
HB 5830.16-1997 Environmental conditions and test methods for airborne equipment temperature-humidity-altitude
HB 6783.13-1993 Verification Methods for Climatic Environment Test Box (Chamber) for Military Airborne Equipment - Temperature-humidity-height Test Box (Chamber)
HB 6783.4-1993 Verification Methods for Climatic Environment Test Box (Chamber) for Military Airborne Equipment - Temperature-height Test Box (Chamber)
HB 7122.2-1994 Verification Methods for Climatic Environment Test Box (Chamber) for Civil Craft Airborne Equipment - Temperature and Height Test Box (Chamber)
HB 6783.3-1993 Verification Methods for Climatic Environment Test Box (Chamber) for Military Airborne Equipment - Temperature Test Box (Chamber)

未注明发布机构

FORD FLTM EU-BZ 052-1-2001 TESTS FOR CLEANLINESS OF FUEL TANKS

National Metrological Technical Specifications of the People's Republic of China

JJF 1564-2016 Calibration Specification for Temperature and Humidity Standard Chambers

Professional Standard - Petroleum

SY/T 5825-1993 Mechanical downhole thermometer temperature test

Professional Standard - Chemical Industry

HG/T 2384-1992 Specifications for rubber brittleness temperature testing machine
HG/T 2384-2011 Technical specifications for rubber low-temperature impact testers

Ente Nazionale Italiano di Unificazione

UNI ISO 2772:2025 Test conditions for box type vertical drilling machines — Testing of the accuracy
UNI 5028-1962 Refrigerator thermometer for ships. Technical conditions for supply of glass for thermometers
UNI 5026:1962 Refrigerator thermometers for naval use.
UNI 5026-1962 Refrigerator thermometer for ships
UNI EN 17066-1:2020 Insulated means of transport for temperature sensitive goods - Requirements and testing - Part 1: Container

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association

JEDEC JEP153A-2014 Characterization and Monitoring of Thermal Stress Test Oven Temperatures

International Organization for Standardization (ISO)

ISO 2772:2019 Test conditions for box type vertical drilling machines — Testing of the accuracy
ISO 1496-2:2008 Series 1 freight containers - Specification and testing - Part 2: Thermal containers
ISO 3452-5:2008 Non-destructive testing - Penetrant testing - Part 5: Penetrant testing at temperatures higher than 50 °C

British Standards Institution (BSI)

BS EN IEC 60068-3-6:2018 Environmental testing - Supporting documentation and guidance. Confirmation of the performance of temperature/ humidity chambers
BS EN ISO 2812-5:2007 Paints and varnishes - Determination of resistance to liquids - Temperature-gradient oven method
BS 619:1935 Laboratory incubator, water bath and oven thermometers
BS ISO 1496-2:2008 Series 1 freight containers - Specification and testing - Thermal containers
BS 3951-2-2.2:1989 Freight containers. Specification and testing of series 1 freight containers-Thermal containers
BS EN ISO 2812-5:2018 Paints and varnishes. Determination of resistance to liquids. Temperature-gradient oven method
BS EN ISO 3452-5:2008 Non-destructive testing - Penetrant testing - Penetrant testing at temperatures higher than 50 degrees C
BS ISO 2772:2019 Test conditions for box type vertical drilling machines. Testing of the accuracy
BS EN 60068-2-39:2016 Environmental testing. Tests. Tests and guidance: Combined temperature or temperature and humidity with low air pressure tests
BS EN ISO 3452-5:2009 Non-destructive testing. Penetrant testing. Penetrant testing at temperatures higher than 50 degrees C
BS EN ISO 75-1:2013 Plastics. Determination of temperature of deflection under load. General test method

Australian/New Zealand Standard (AU-AS/NZS)

AS/NZS 1580.101.5:1999 Paints and related materials - Methods of test - Conditions of test - Temperature and humidity control
AS/NZS 1580.101.5:1999(R2013) Paints and related materials - Methods of test - Conditions of test - Temperature and humidity control
AS/NZS 1580.101.4:1999(R2013) Paints and related materials - Methods of test - Conditions of test - Temperature control
AS/NZS 1580.101.4:1999 Paints and related materials - Methods of test - Conditions of test - Temperature control
AS/NZS 1580.101.1:1999(R2013) Paints and related materials - Methods of test - Conditions of test - Temperature, humidity and airflow control
AS/NZS 1580.101.1:1999 Paints and related materials - Methods of test - Conditions of test - Temperature, humidity and airflow control
AS/NZS 1580.101.1:1999 (Reconfirmed) 2013-09-13 Paints and related materials-Methods of test, Part 101.1: Conditions of test-Temperature- humidity and airflow control

Association Francaise de Normalisation

NF E60-133*NF ISO 2772:2019 Test conditions for box type vertical drilling machines - Testing of the accuracy
NF EN ISO 13078:2013 Oral medicine - Dental oven - Test method for measuring temperature using a thermocouple
NF X15-016:1981 ENCLOSURES WITH AUTOMATIC TEMPERATURE AND HUMIDITY CONTROL.

Korean Agency for Technology and Standards (KATS)

KS V 7220-2003 Shipbuilding-Thermometer pockets
KS T ISO 1496-2:2002 Series 1 freight containers － Specification and testing － Part 2: Thermal containers

Spanish Association for Standardization (UNE)

UNE-EN IEC 60068-3-6:2018 Environmental testing - Part 3-6: Supporting documentation and guidance - Confirmation of the performance of temperature/humidity chambers (Endorsed by Asociación Española de Normalización in May of 2018.)
UNE-EN IEC 60068-3-6:2018/AC:2018-05 Environmental testing - Part 3-6: Supporting documentation and guidance - Confirmation of the performance of temperature/humidity chambers (Endorsed by Asociación Española de Normalización in June of 2018.)

Danish Standards Foundation

DANSK DS/EN IEC 60068-3-6:2018 Environmental testing – Part 3-6: Supporting documentation and guidance – Confirmation of the performance of temperature/humidity chambers
DANSK DS/EN 60068-3-6:2002 Environmental testing - Part 3-6: Supporting documentation and guidance - Confirmation of the performance of temperature/humidity chambers

National Standardisation Body (ASRO)

STAS 8375/3-1969 Laboratory thermometer. Premature baby incubator thermometer
STAS 8375/2-1969 Laboratory thermometer. boiling point thermometer

Bureau of Indian Standards

IS 17925-2022 Test Conditions for Box Type Vertical Drilling Machines Testing of the Accuracy

Swedish Institute for Standards

SS-ISO 2772:2019 Test conditions for box type vertical drilling machines - Testing of the accuracy (ISO 2772:2019, IDT)

GCC Standardization Organization

GSO IEC 60068-3-6:2021 Environmental testing - Part 3-6: Supporting documentation and guidance - Confirmation of the performance of temperature/ humidity chambers
GSO ISO 3270:2007 Paints and varnishes and their raw materials-Temperatures and humilities for conditioning and testing

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO IEC 60068-3-6:2022 Environmental testing - Part 3-6: Supporting documentation and guidance - Confirmation of the performance of temperature/ humidity chambers

Comitato Elettrotecnico Italiano

CEI EN IEC 60068-3-6:2018 Environmental testing Part 3-6: Supporting documentation and guidance - Confirmation of the performance of temperature/humidity chambers

Magyar Szabványügyi Testület

MSZ 7535-1984 Plastic transport box. High temperature resistance test and detection

Czech Standards Institute (UNMZ)

CSN 77 0662-1982 Wooden crates. Testing of mechanical resistance

German Institute for Standardization

DIN 53286:1968 Testing conditions for metal adhesives and their metal bonded joints Testing conditions at different temperatures
DIN 13221 E:2016 Draft Document - Laboratory refrigerators - Terms, requirements, testing

Japanese Industrial Standards Committee (JISC)

JIS B 6209-1:1998 Box type upright drilling machines -- Testing of the accuracy

American Society for Testing and Materials (ASTM)

ASTM D7779-11(2015) Standard Test Method for Determination of Fracture Toughness of Graphite at Ambient Temperature

International Sate Transit Association

ISTA 7D-2007(2013) ISTA 7D Temperature Test

Association of German Mechanical Engineers

VDI/VDE 3512 Blatt 4-2007 Temperaturmessung fuer die Gebaeudeautomation - Pruefung von Temperaturfuehlern
VDI/VDE 3512 BLATT 4-2017 Temperature measurement for building automation — Testing of temperature sensors

Others: Temperature Test Chamber,Temperature Test Chamber,Chamber Temperature Test Strips