organic film and water film

organic film and water film, Total:178 items.

The international standard classification for "organic film and water film" includes: Surface treatment and coating in general , Surface treatment , Microbiology of water , Aluminium products , Compressors and pneumatic machines , Optics and optical measurements , Sowing and planting equipment .

The Chinese standard classification for "organic film and water film" includes: Non-ferrous metals and their alloys products in general , Metal physical and chemical property test method in general , Separating machinery , Metal physical property test method , Compressor and fan , Optical instrument in general , Farming machinery and tools , Technical Management , Surface protection equipment .

Group Standards of the People's Republic of China

T/ZZB 0172-2017 Membrane filter press for sludge dewatering
T/CNIA 0165-2023 Corrosion morphology of aluminum and aluminum alloy anodized films and organic polymer films
T/QGCML 4176-2024 Continuous coating equipment with rotating mechanism
T/HBBWA 41-2021 SBS waterproof membrane HDPE mask, bottom film
T/SAAMM 1003-2022 Integrated machine for dry direct seeding and film covering of rice
T/GDFPMA 01-2020 Mask boxing machine
T/CAMA 31-2020 Technical specification of collector for corn whole plastic film mulching on double ridges
T/GDEACC 11-2019 Thick film instant water dispenser
T/ZZB 1506-2020 Low noise film capacitor for LED light
T/QGCML 3118-2024 Mold temperature controller for laminating machine
T/JAASS 158-2025 Technical specification for organic rice planting with film covering machine
T/FSI 118-2023 Addition type silicone pressure sensitive adhesive for protective film
T/JSIES 010-2024 AMOLED metal mask for vacuum coating
T/CPCA 4311-2024 Specification of OSP film for printed circuit board
T/LLX 0003-2023 Oxalic anodic oxide coatings and organic polymer coatings on aluminium and its alloys
T/CPCIF 0273-2023 Rapid detection method of volatile organic pollutants in soil and groundwater—Membrane interface detection technology

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 12967.3-2022 Test methods for anodic oxidation coatings and organic polymer coatings on aluminium and aluminium alloys—Part 3 : Salt spray test
GB/T 37215-2018 Hydrophobic hollow fiber membrane for membrane distillation
GB/T 42514-2023 Corrosion evaluation for anodic oxide coatings and organic polymer coatings on aluminium and its alloys—Chart method
GB/T 26296-2010 Defects for anodic oxide coatings and organic polymer coatings on aluminum and its alloys
GB/T 8013.4-2021 Anodic oxide coatings and organic polymer coatings on aluminium and its alloys—Part 4: Texture coatings
GB/T 8013.1-2018 Anodic oxide coatings and organic polymer coatings on aluminium and its alloys—Part 1:Anodic oxide coatings
GB/T 37206-2018 Test method for antibacterial properties of organic separation membrane
GB/T 8013.3-2007 Anodic oxide coatings and organic polymer coatings on aluminium and its alloys-Part 3:Organic polymer coatings
GB/T 8013.5-2021 Anodic oxide coatings and organic polymer coatings on aluminium and its alloys—Part 5: Function coatings
SPC GB/T 37206-2018 Test method for antibacterial properties of organic separation membrane (TEXT OF DOCUMENT IS IN CHINESE)
GB/T 8013.3-2018 Anodic oxide coatings and organic polymer coatings on aluminium and its alloys—Part 3:Organic polymer coatings
GB/T 8754-2022 Anodic oxidation coatings and organic polymer coatings on aluminium and aluminium alloys—Determination of electrical insulation
GB/T 8013.1-2007 Anodic oxide coating and organic polymer coatings on aluminium and its alloys-Part 1:Anodic oxide coatings
GB/T 8013.2-2018 Anodic oxide coatings and organic polymer coatings on aluminium and its alloys—Part 2:Combined coatings
GB/T 42544-2023 Corrosion evaluation for anodic oxide coatings and organic polymer coatings on aluminium and its alloys—Grid method
GB/T 12967.6-2022 Test methods for anodic oxidation coatings and organic polymer coatings on aluminium and aluminium alloys—Part 6: Determination of color and appearance
GB/T 8013.2-2007 Anodic oxide coatings and organic polymer coatings on aluminium and its alloys-Part 2:Combined anodic oxide coating

Professional Standard - Chemical Industry

HG/T 6252~6253-2023 Amphiphobic membranes for gas purification and organic composite membranes for powder recovery
HG/T 5231-2017 Organic tubular membrane module
HG/T 6253-2023 Organic composite membrane for powder recycling
HG/T 5599-2019 Rubber roller for film-mulching machine
HG/T 6206~6207-2023 Optical functional film without protective film Optical prism film and top optical enhancement film

Professional Standard - Machinery

JB/T 6905-2019 Diaphragm compressor
JB/T 6905-1993 diaphragm compressor
JB/T 20209-2024 Oral Disintegrating Film Coating Machine
JB/T 5422-1991 Paper Laminator
JB/T 14286-2022 Rice transplanter covered with film
JB/T 6905-2019 Diaphragm compressor
JB/T 20209-2025 Preparation machine of orally disintegrating film
JB/T 7732-2023 Seed sowing machine for mulching film
JB/T 8226.2-1999 Coating for optical element double layeranti - reflecting coating by hydrolltic process
JB/T 7732-2006 Seed sowing machine for the mulching film
JB/T 6905-2004 Diaphragm compressor
JB/T 5423-1991 Plastic laminating machine

Professional Standard - Electron

SJ/T 31203-1994 Requirements of Readiness and Methods of Inspection and Assessment for Double-row 32-station Organic Film Coating Machines
SJ/T 10343-1993 Organic film paint for black and white picture tubes
SJ/T 1148-1993 Test method for breakdown strength of organic film for use in capacitors

Heilongjiang Provincial Standard of the People's Republic of China

DB23/T 2413-2019 Technical specification for the operation of rice film-covered rice transplanter
DB23/T 2414-2019 The working quality of rice-covered rice transplanter

Military Standard of the People's Republic of China-General Armament Department

GJB 10314-2021 Specification for aircraft dura mater dehydration and rust inhibitors

Xinjiang Provincial Standard of the People's Republic of China

DB65/T 3109-2013 Technical regulations for drip irrigation and water film management under corn mulch

Gansu Provincial Standard of the People's Republic of China

DB62/T 484-1996 Experimental method of wheat film-covered hole-seeding machine
DB62/T 2774-2017 User survey method for applicability evaluation of film-laying machinery and film-picking machinery

Jilin Provincial Standard of the People's Republic of China

DB22/T 2953-2018 Technical regulations for rice mechanical film mulching production

Professional Standard - Non-ferrous Metal

YS/T 1186-2017 Falling sand tester for testing the wear resistance of anodized films and organic polymer films on aluminum surfaces

Shanxi Provincial Standard of the People's Republic of China

DB1411/T 70-2024 Technical regulations for planting red kidney beans on the side of water-permeable mulch

Professional Standard - Light Industry

QB/T 4930-2016 Leather machines. Film application machine

Liaoning Provincial Standard of the People's Republic of China

DB21/T 3331-2020 Technical specification for mechanical recycling of film-covered peanut residue

未注明发布机构

FORD M99J353-A-2000 FILM, PEELABLE, WATER BASE

Thai Industrial Standards Institute (TISI)

TIS 2490-2011 Plastic films for organic acid food drinking water

American Society for Testing and Materials (ASTM)

ASTM RR-D01-1064 1990 D1653-Test for Water Vapor Permeability of Organic Coating Films
ASTM D1653-03 Standard Test Methods for Water Vapor Transmission of Organic Coating Films
ASTM D1653-93(1999)e1 Standard Test Methods for Water Vapor Transmission of Organic Coating Films
ASTM D1653-13 Standard Test Methods for Water Vapor Transmission of Organic Coating Films
ASTM D1653-03(2008) Standard Test Methods for Water Vapor Transmission of Organic Coating Films
ASTM D1653-13(2021) Standard Test Methods for Water Vapor Transmission of Organic Coating Films
ASTM RR-D01-1013 1978 D1212-Measurement of Wet Film Thickness of Organic Coatings
ASTM D1212-91(2007) Standard Test Methods for Measurement of Wet Film Thickness of Organic Coatings
ASTM D4708-19 Standard Practice for Preparation of Uniform Free Films of Organic Coatings
ASTM RR-D01-1023 1979 D1212-Test Methods for Measurement of Wet Film Thickness of Organic Coatings
ASTM D4708-07 Standard Practice for Preparation of Uniform Free Films of Organic Coatings
ASTM F22-02 Standard Test Method for Hydrophobic Surface Films by the Water-Break Test

American Water Works Association (AWWA)

AWWA ACE92179 Membrane Extraction for Removal of Organic Contaminants From Water
AWWA MTC93024 Use of Organic Microfiltration Membranes for Groundwater Treatment
AWWA WQTC69336 Selected Membrane Research Topics: Ceramic Membranes, Organic (Matter) Fouling, Organic Micropollutant Rejection
AWWA MTC61235 Evaluation of Membranes and Dissolved Air Flotation to Treat High Organic and High Turbidity Water
AWWA WQTC58881 Removal of Organic CCL Contaminants from Drinking Waters by Membrane and GAC Processes
AWWA WQTC65966 Aggravated Fouling of NF and RO Membranes in the Presence of Dissolved Organic Matter and Inorganic Colloids
AWWA WQTC62468 Identification of Organic Foulants of Low and High Pressure Membranes
AWWA ACE94128 Removal of Natural Organic Matter by Membranes
AWWA MTC61197 Understanding Membrane Fouling at High Organic Loading Rates in the Submerged Membrane Bioreactor Treating Municipal Wastewater
AWWA MTC61186 Rejection of Non-ionic Organic Micropollutants by Reverse Osmosis and Nanofiltration Membranes: Effect of Membrane Fouling
AWWA MTC61157 Modeling of the Fouling Mechanisms Occurring in Low-Pressure Membranes During Organic Fouling by Municipal Wastewater
AWWA WQTC58996 Factors Influencing Selection of Nanofiltration Membranes for Removal of Organics from Surface Water
AWWA WQTC55022 Rejection of Wastewater Effluent Organic Matter by Microfiltration and Ultrafiltration Membranes for Potable Reuse
AWWA ACE56191 Integration of Membranes into Existing Water Treatment Works
AWWA MTC61215 Aerobic Membrane Feedwater Conditions: Friend or Foe?
AWWA SP250169 Organics Removal From Eastern U.S. Surface Waters Using Ultra-Low Pressure Membranes
AWWA MTC93037 Crossflow Membrane Filtration for the Removal of Natural Organic Matter
AWWA MTC69699 Mechanisms of Coupled Organic and Colloidal Fouling of a Low-salt Rejecting Nanofiltration Membrane
AWWA MTC93048 Effect of Ozonation on Organic Membrane Fouling
AWWA SP250152 Some Aspects of the Fouling of Ultrafiltration Membranes by Natural Organic Matter in Water Treatment
AWWA MTC50295 Insights on Recent Membrane Integrity Testing of an Organic Selective Nanofiltration & Hybrid Membrane Arrangement
AWWA MTC57558 Detection of Organic and Biological Foulants on Polyamide Membranes During Surface Water Treatment
AWWA ACE58287 Installation of Low-Pressure Membranes into an Existing Water Treatment Facility
AWWA MTC61151 Rejection of Trace Organic Compounds by Reverse Osmosis and Nanofiltration Membranes
AWWA MTC53882 Membrane Technology Innovations to Obtain High Rejections of Weak Inorganic and Organic Acids and Silica in Brackish and Waste Waters
AWWA SP250174 Performance of a Loose-RO Membrane for the Removal of Organic Compounds From Fresh Surface Water
AWWA MTC50261 ICR Pilot Test Using an Organic Selective Nanofiltration Membrane to Treat a Microfiltered Surface Water
AWWA MTC64506 Membrane Forensics and Its Value to Membrane Water Plants
AWWA ACE94179 Organic Solute Association With Nanofiltration Membrane Surface: Influence of pH and Ionic Strength on Membrane Permeability
AWWA MTC69657 Removal of Emerging Organic Contaminants by High-Pressure Membranes: Mechanisms, Monitoring, and Modeling
AWWA WQTC62413 Viability of NF and ULPRO Membranes for the Removal of Organic Micropollutants, Nutrients and Bulk Organic Carbon
AWWA WQTC63981 Influence of Hydrophobicity and Charge on Removal of Trace Organic Pollutants with High Pressure Membranes
AWWA WQTC57113 Effective Membrane Fouling Control: A New Membrane Cleaning Concept
AWWA MTC69778 Chlorine Resistant Membrane and the Mechanism of Membrane Degradation by Chlorine
AWWA MTC69658 Rejection of Organic Micropollutants by Clean and Fouled Nanofiltration Membranes
AWWA ACE58127 Integration of Membranes into an Existing Water Treatment Facility: Performance of Membranes in Treating Surface Water with and without Pretreatment
AWWA MTC64618 Understanding Low-Pressure Membrane Fouling through Analytical Footprints of Wastewater Effluent Organic Matter (EfOM)
AWWA MTC57655 Evaluation of UF Membranes for Effective Wastewater Effluent Organic Matter (EfOM) Removal with Hydrophilic Polymer Additives
AWWA ACE60017 Low Pressure Membrane (MF/UF) Fouling Associated with Allochthonous versus Autochthonous Natural Organic Matter (NOM)
AWWA MTC57652 Get the Organics Out: The Use of Low-Pressure Membrane Filtration for TOC Removal
AWWA SP250140 Membrane Technologies and Drinking Water Regulations
AWWA MTC53724 Influence of Dissolved Natural Organic Matter on the Transport of Trace Organics Across Semipermeable Membranes
AWWA WQTC69403 Surface Water Treatment Evaluation: Ceramic Membranes vs. Polymeric Membranes
AWWA MTC69697 Morphological Analyses of Organic UF Membranes: Surface Morphology and Pore Size Distribution
AWWA MTC69757 Membrane Processes for the Reuse and Reclamation of Non-Ferrous Mine Process Water
AWWA JAW71202 Journal AWWA — Water Quality Assessment of Groundwater Treated with a Membrane Biofilm Reactor
AWWA WQTC63977 Factors Influencing Natural Organic Matter Fouling in Low Pressure, Hollow Fiber Membrane Filtration of Natural Waters
AWWA JAW26064 Journal AWWA — Using a Microporous Hollow-Fiber Membrane to Separate VOCs From Water
AWWA ACE65128 A Serial Filtration Investigation of Membrane Fouling by Natural Organic Matter
AWWA SP250184 Custom Membrane Warranties: Are They Necessary?
AWWA MTC53690 Retrofitting Membrane Filtration into an Existing Direct Filtration Water Treatment Plant
AWWA ACE61783 Breaking the Hydraulic Grade: Incorporating a Membrane Filtration Treatment Plant into an Existing Water Supply System
AWWA WQTC71664 Biofiltration for Organic Carbon, MIB, Geosmin, Manganese, EDCs and Membrane Fouling

Korean Agency for Technology and Standards (KATS)

KS D 8303-2024 Combined coatings of anodic oxide and organic coatings on aluminium and aluminium alloys
KS D ISO 10546-2013 Chemical conversion coatings－Rinsed and non-rinsed chromate conversion coatings on aluminium and aluminium alloys
KS K 0103-2016(2021) Technical terms for membranes and membrane processes
KS M ISO 5989:2002 Photography－Pre－packaged chemicals for the processing of silver halide based photographic materials－Vocabulary

Finnish Standards Institute

SFS 4225 E-1984 Plastic film. PEL-water vapor film and condensation film. Dimensional and quality requirements

Gosstandart of Russia

GOST 16324-1983 Cast iron diaphragm control valves with pneumatic diaphragm actuator
GOST R 50110-1992 Polymeric membranes. Definition method of flat ultrafiltration membranes water flux

Ente Nazionale Italiano di Unificazione

UNI SPERIMENTALE 8898-7:1988 Polymeric water proof sheets. Reinforced elastomeric sheets with postponed reticulation. Characteristics and acceptance limits.
UNI SPERIMENTALE 8898-5:1988 Polymeric water proof sheets. Flexible reinforced plastomeric sheets. Characteristics and acceptance limits.
UNI EN 13583:2003 Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Determination of hail resistance
UNI EN 1849-2:2002 Flexible sheets for waterproofing - Determination of thickness and mass per unit area - Plastic and rubber sheets for roof waterproofing
UNI EN 13956:2006 Flexible sheet for waterproofing - Plastic and rubber sheets for roof waterproofing - Definitions and characteristics
UNI EN 13707:2009 Flexible sheets for waterproofing - Reinforced bitumen sheets for roof waterproofing - Definitions and characteristics
UNI EN ISO 14189:2016 Water quality - Enumeration of Clostridium perfringens - Method using membrane filtration
UNI EN 13967:2005 Flexible sheets for waterproofing - Plastic and rubber damp proof sheets including plastic and rubber basement tanking sheet - Definitions and characteristics
UNI EN 13416:2003 Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Rules for sampling
UNI EN 13897:2005 Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Determination of watertightness after stretching at low temperature
UNI EN 18088:2025 Flexible sheets for waterproofing - Plastics recycling and recycled plastics - Plastic waterproofing sheets
UNI SPERIMENTALE 8898-2:1987 Polimeric waterproof sheets. Elastomeric sheets without reinforcement. Characteristics and acceptance limits.

Portuguese Institute of Quality

NP EN 1110-2001 Flexible sheets for waterproofing Bitumen sheets for roof waterproofing Determination of flow resistance at elevated temperature

Institute of Interconnecting and Packaging Electronic Circuits (IPC)

IPC TM-650 2.4.41.3-1995 In-Plane Coefficient of Thermal Expansion, Organic Films
IPC TM-650 2.4.24.2-1995 Glass Transition Temperature of Organic Films - DMA Method
IPC TM-650 2.4.24.3-1995 Glass Transition Temperature of Organic Films - TMA Method
IPC 4555-2022 Performance Specifications for High Temperature Organic Solderability Preservatives (OSP)

Swiss Association for Standardization (SNV)

SNV 742 402.19-1970 Comparative summary of plastics (organic plastics). film

American Petroleum Institute (API)

API PUBL 4690-2002 Guide for the Use of Semipermeable Membrane Devices (SPMDs) as Samplers of Waterborne Hyhrophobic Organic Contaminats

Bureau of Indian Standards

IS 18771-2024 Water Quality - Enumeration of Clostridium perfringens - Method Using Membrane Filtration

Association Francaise de Normalisation

NF EN ISO 14189:2017 Water quality - Enumeration of Clostridium perfringens - Membrane filtration method

Swedish Institute for Standards

SS-EN 16002:2018 Flexible sheets for waterproofing - Determination of the resistance to wind load of mechanically fastened flexible sheets for roof waterproofing

US Federal Contractor Registration (USFCR)

FCR FED FCGS 07111-1979 ELASTOMERIC MEMBRANE WATERPROOFING
FCR FED FCGS 07112-1979 BITUMINOUS MEMBRANE WATERPROOFING

American National Standards Institute （ANSI)

ANSI B151.5-2000 Plastic Film and Sheet Winding Machinery - Manufacture, Care, and Use

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO ISO 14189:2017 Water quality -- Enumeration of Clostridium perfringens -- Method using membrane filtration
BH GSO ISO 15989:2016 Plastics - Film and sheeting - Measurement of water-contact angle of corona-treated films

Association of German Mechanical Engineers

DVS 2925-2005 Resistance spot welding, projection welding and seam welding of organic film coated steel plates

GM Daewoo

GMKOREA EDS-T-7782-2011 Test Method for the Thickness of the Dried Film of Organo- Coated Products

The Directorate General of Specifications and Metrology (DGSM)

OS GSO ISO 14189:2015 Water quality -- Enumeration of Clostridium perfringens -- Method using membrane filtration

GCC Standardization Organization

GSO ISO 14189:2015 Water quality -- Enumeration of Clostridium perfringens -- Method using membrane filtration

GM North America

GM 9986124-1996 Lubricant - Dry Film, Water Based

Standards Norway

NS-EN 13831:2007 Closed expansion vessels with built in diaphragm for installation in water

Danish Standards Foundation

DANSK DS/EN 13831:2007 Closed expansion vessels with built in diaphragm for installation in water

Spanish Association for Standardization (UNE)

AENOR UNE-EN 13831:2008 Closed expansion vessels with built in diaphragm for installation in water
AENOR UNE-EN ISO 14189:2017 Water quality. Clostridium perfringens count. Membrane filtration method. (ISO 14189:2013).

International Organization for Standardization (ISO)

ISO 14189:2013 Water quality.Enumeration of Clostridium perfringens.Method using membrane filtration

Malaysia Standards

MS 1509-2000 Method of test for film hardness of an organic coating by pencil test

National Association of Corrosion Engineers (NACE)

NACE No.11 SSPC-PA 8 2003 Thin-Film Organic Linings Applied in New Carbon Steel Process Vessels

British Standards Institution (BSI)

11/30215667 DC BS ISO 14189. Water quality. Enumeration of Clostridium perfringens. Method using membrane filtration

Others: Use of organic and aqueous membranes,Water film organic film,Water film and organic film,organic film and water film,Water film and organic film,Water film organic film,Aqueous and organic membranes,organic film, water film