gel test strips
gel test strips, Total:177 items.
The international standard classification for "gel test strips" includes: Motion picture films. Cartridges , Photographic paper, films and cartridges , Biology. Botany. Zoology , Latex and raw rubber , Paints and varnishes , Products of the chemical industry , Reinforced plastics .
The Chinese standard classification for "gel test strips" includes: Basic standards and general methods for photosensitive material , Photosensitive material , Pipe fittings, clamps and seals , Biochemical reagent and clinical analysis reagent , Forestry chemical raw material , Fibre reinforced composites .
国家质量监督检验检疫总局
- SN/T 4546-2017 Commercial kit method-Staphylococcus aureus-Test method Ⅰ
Professional Standard - Chemical Industry
- HG/T 3559-1988 Method for determination of adhesion fastness of base layer of film sheet
- HG/T 3009-1999 Photographic film and film base - Determination of thickness by mechanical scanning
- HG/T 2914-1997 Method for determination of the antiadhesion property of photographic film and film base
- HG/T 3558-1988 Method for determination of the moisture content of photographic film and film base
- HG/T 3328-1980 Railway concrete sleeper (board) rubber sheet (sheet)
Professional Standard - Aviation
- HB 5429-1989 High acrylonitrile butadiene rubber and fluororubber test film
- HB 7136-1995 Fluorosilicone rubber test film
- HB 6689-1992 Rubber Sheet for Silicon Rubber Test
Group Standards of the People's Republic of China
- T/CECS 10189-2022 Concrete Water Reducer Molecular Weight Test Gel Permeation Chromatography
- T/CSTM 00193-2020 Aerogel thermal insulation sheets for Lithium-ion power battery
- T/JSRH 006-2024 Oil gel
- T/JSFZXH 014-2024 Gel pillow
Taiwan Provincial Standard of the People's Republic of China
- CNS 11888-1987 Method of Test for Pressure Sensitive Adhesive Tapes and Sheets
Military Standard of the People's Republic of China-General Armament Department
- GJB 304-1987 aviation film roll
- GJB 1059.4A-2020 Test methods of phenolic resin for ablative materials—Part 4:Test of gelation time
- GJB 1059.4-1990 Test methods of phenolic resin for ablative materials--Test of gelation time
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会
- GB/T 34794-2017 Guidelines for DNA gel purification kit
Professional Standard - Petrochemical Industry
- SH/T 1050-1991 Determination of gel content of raw synthetic rubber
- SH/T 1050-2014 Determination of gel content of raw synthetic
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China
- GB/T 12683-2009 Method for determining the tensile properties of photographic film and film base
- GB/T 8138-2009 Shellac
- GB/T 9858-1988 Method for determining the folding endurance of photographic film and film base
- GB/T 8090-1987 Raw natural rubber--White crepes and pale crepes
- GB/T 8139-2009 Dewaxed shellac,decolorized shellac,decolorized and dewaxed shellac
- GB/T 15457-1995 Method for determining lubrication of photographic film and film base
- GB/T 12683-1990 Method for determining the tensile properties of photographic film and film base
- GB/T 8089-2007 Raw natural rubber - Smoked sheets、white crepes and pale crepes
- GB/T 9858-2009 Method for determining the folding endurance of photographic film and film base
- GB/T 8139-1987 Dewaxed shellac, Decolorized shellac and decolorized dewaxed shellac
工业和信息化部
- HG/T 3558-2019 Method for determination of moisture content of photographic film and film base
Professional Standard - Agriculture
- GB 8139-1987 Dewaxed shellac, Decolorized shellac and decolorized dewaxed shellac
- GB 8090-1987 Raw natural rubber; White crepes and pale crepes
Professional Standard - Building Materials
- JC/T 774-2004 Test method for gel time of prepreg
国家市场监督管理总局、中国国家标准化管理委员会
- GB/T 37498-2019 Rubber,raw natural—Determination of the gel content of technically specified rubber (TSR)
Standard Association of Australia (SAA)
- AS 2656:1984 Test microfiche
SE-SIS
- SIS SS 3165-1988 Drafting film - Polyester based drafting film with mat surface - Testing
- SIS 22 77 01-1962 Concrete roofing tiles. Quality and test requirements
CZ-CSN
- CSN 64 0181-1986 Plastics. Methods of thickness determination of films and sheets
- CSN 66 6415-1969 Safety film. Demand on safety and testing
- CSN 01 3826-1990 Micrographics. Test microforms
- CSN ISO 10602:1994 Photography-Processed silver-gelatin type black-and-white film-Specifications for stability
- CSN 66 6408-1974 Speed of reversal films. Testing. Markmg on the packing
- CSN 77 0852-1986 Packaging adhesives. Determination of the elasticity of film
- CSN 66 6405-1972 Speed of black and white reversal films. Testing. Marking on the paoking.
- CSN 01 3816-1978 Microfilms and microfiches production procedure
- CSN 64 0602-1976 Deturminatian of locking of plastic ilms
- CSN 01 3812-1978 Microfilms and microfiches. Types and dimensions
Society of Motion Picture and Television Engineers (SMPTE)
- SMPTE ST 183M-1996 Motion-Picture Film - Photographic Audio Level Test Films - Measurement of Photoelectric Output Factor
- SMPTE ST 223M-2001 Motion-Picture Film - Safety Film
- SMPTE 223M-2001 Motion-Picture Film - Safety Film
- SMPTE 183M-1996 Motion-Picture Film - Photographic Audio Level Test Films - Measurement of Photoelectric Output Factor
- SMPTE 145-2004 Motion-Picture Film (65-mm) - Perforated KS
- SMPTE 139-2003 Motion-Picture Film (35-mm) - Perforated KS
SCC
- BS 6057-3-3.8:1981 Rubber latices. Methods of test-Determination of coagulum content of rubber latices
- BS EN ISO 10339:1999 Ophthalmic optics. Contact lenses. Determination of water content of hydrogel lenses
- BS 6057-3.8:1987 Rubber latices. Methods of test-Determination of coagulum content (sieve residue)
- MIL MIL-A-37425-1976 ALUMINUM HYDROXIDE GEL, DRIED, TABLETS, U.S.P. (NO S/S DOCUMENT)
- NS-EN ISO 10339:1999 Ophthalmic optics — Contact lenses — Determination of water content of hydrogel lenses (ISO 10339:1997)
- BS EN 584-1:1995 Non-destructive testing. Industrial radiographic film-Classification of film systems for industrial radiography
- VDI 3491 BLATT 4-2018 Measuring particles — Preparation methods for test aerosols — Condensation method
- VDI 3491 BLATT 4-2018 Measuring particles — Preparation methods for test aerosols — Condensation method
- DANSK DS/EN 12681-1:2017 Founding – Radiographic testing – Part 1: Film techniques
- DANSK DS/ISO 18907:2013 Imaging materials - Photographic films and papers - Wedge test for brittleness
- NS-EN 12681-1:2017 Founding — Radiographic testing — Part 1: Film techniques
- AENOR UNE-EN 12681-1:2018 Founding - Radiographic testing - Part 1: Film techniques
- BS 3900-J3:1987 Methods of test for paints. Determination of the gelation time of coating powders
- BS 4526-1:1969 Dimensions of motion picture film 35 mm film
- BS 4526-2:1969 Dimensions of motion picture film 16 mm film
- BS 4526-3:1969 Dimensions of motion picture film 8 mm film
Indonesia Standards
- SNI 01-3735-1995 Specification and test method of gelatin
Korean Agency for Technology and Standards (KATS)
- KS M 6402-2018 Testing methods of wet gel strength for compounded latex
- KS B 5628-1991(2016) Test Transparencies for Overhead Projectors
- KS B ISO 9339-2:2004 Optics and optical instruments-Contact lenses-Determination of thickness-Part 2:Hydrogel contact lenses
- KS B ISO 9339-2:2014 Optics and optical instruments — Contact lenses — Determination of thickness — Part 2: Hydrogel contact lenses
- KS B 5628-1991(2021) Test Transparencies for Overhead Projectors
- KS C 6564-2002 Test methods of hot-film flow sensors
- KS X ISO 6197-1:2005 Microfilming of press cuttings-Part 1:16 mm Silver-gelatin type roll microfilm
- KS X ISO 6197-1:2002 Microfilming of press cuttings-Part 1:16 mm Silver-gelatin type roll microfilm
- KS M 6402-1988 Testing methods of wet gel strength for compounded latex
- KS M 6402-2008 Testing methods of wet gel strength for compounded latex
- KS M 6402-2023 Testing methods of wet gel strength for compounded latex
- KS M ISO 34-2:2009 Rubber, vulcanized or thermoplastic-Determination of tear strength-Part 2:Small(Delft) test pieces
- KS M ISO 706-2019 Rubber latex-Determination of coagulum content(sieve residue)
- KS M ISO 706:2009 Rubber latex-Determination of coagulum content(sieve residue)
- KS M ISO 34-2:2014 Rubber, vulcanized or thermoplastic — Determination of tear strength — Part 2: Small(Delft) test pieces
Japanese Industrial Standards Committee (JISC)
- JIS K 7619:1988 Determination of the curl of photographic film
- JIS Z 0237:2022 Testing methods of pressure-sensitive adhesive tapes and sheets
- JIS Z 4918:2009 Illuminators for medical films
Danish Standards Foundation
- DS 423.40:2002 Testing of concrete - Hardened concrete - Production of fluorescence impregnated thin sections
IN-BIS
- IS 5266-1969 400 Hz signal level test film specifications
- IS 10016 Pt.5-1981 Test Methods for Polybutadiene Rubber Part V Determination of Gel Content
- IS 5265-1969 Specification for test films for 16 mm sound and picture motion picture projectors
- IS 5262-1969 Specification for test films for 16 mm sound and picture motion picture projectors
- IS 5263-1969 Specification for test films for 16 mm sound and picture motion picture projectors
Australian/New Zealand Standard (AU-AS/NZS)
- AS/NZS 4589:1999 Micrographics - Microfilming of documents on 16 mm and 35 mm silver-gelatin type microfilm - Operating procedures
American Society for Testing and Materials (ASTM)
- ASTM D8329-21 Standard Test Method for Determination of Water/Cementitious Materials Ratio for Geosynthetic Cementitious Composite Mats (GCCMs) and Measurement of the Compression Strength of the Cementitious Materi
- ASTM D8329-20 Standard Test Method for Determination of Water/Cementitious Materials Ratio for Geosynthetic Cementitious Composite Mats (GCCMs) and Measurement of the Compression Strength of the Cementitious Materi
- ASTM D3351-93 Standard Test Method for Gel Count of Plastic Film
- ASTM D3596-14 Standard Practice for Determination of Gels (Fisheyes) In General-Purpose Poly(Vinyl Chloride) (PVC) Resins
- ASTM D3056-14(2018) Standard Test Method for Gel Time of Solventless Varnishes
- ASTM RR-D11-1012 1977 D3616-Test Method for Rubber—Determination of Gel, Swelling Index, and Dilute Solution Viscosity
- ASTM D3056-05(2010) Standard Test Method for Gel Time of Solventless Varnishes
- ASTM C505-19 Standard Specification for Nonreinforced Concrete Irrigation Pipe with Rubber Gasket Joints
- ASTM D3616-95(2024) Standard Test Method for Rubber—Determination of Gel, Swelling Index, and Dilute Solution Viscosity
- ASTM D3183-10(2015) Standard Practice for Rubber&x2014Preparation of Pieces for Test Purposes from Products
- ASTM D4217-02 Standard Test Method for Gel Time of Thermosetting Coating Powder
- ASTM D4217-91(1995)e1 Standard Test Method for Gel Time of Thermosetting Coating Powder
- ASTM D4217-07(2017) Standard Test Method for Gel Time of Thermosetting Coating Powder
- ASTM F1225-99 Standard Test Method for Measuring the Ribbon Exit Force for Film and Fabric Cartridges
Spanish Association for Standardization (UNE)
- UNE 53-680-1988 Characteristics and testing methods of rubber diaphragms
- UNE-EN ISO 10339:2000 OPHTHALMIC OPTICS. CONTACT LENSES. DETERMINATION OF WATER CONTENT OF HYDROGEL LENSES (ISO 10339:1997)
- UNE 53610:1983 RUBBER LATICES. DETERMINATION OF COAGULUM CONTENT
- UNE 53-213 Pt.2-1986 Plastic sheets and plastic pages. Determination of the thickness of plastic sheets and plastic sheets by direct measurement with a micrometer
- UNE-EN 12681-1:2018 Founding - Radiographic testing - Part 1: Film techniques
- UNE-ISO 706:2012 Rubber latex. Determination of coagulum content (sieve residue)
PL-PKN
- PN C04211-12-1989 Test methods of natural rubber latex Determination of coagulum content
- PN N84456-1992 Photography. Slide projectors and filmstrip projectors. Illumination test
- PN B10026-1970 Monolithic walls of mineral aggre- gate concrete . Principles of execution and testing
BR-ABNT
- ABNT P-MB-277-1964 Tung oil condenses. Glue test
RO-ASRO
- STAS 4606-1980 NATURAL HEAVY WEIGHT AGGPEGATES FOR MORTARS AND CONCRETE W1TH MINERAL BINDING MATERIAL Testing methodo s
- STAS 1811-1971 PLYWOOD Tcnsion test parallel Io plies
- STAS 8798/11-1987 RUBBER LATEX Determination of coagulum content
ET-QSAE
- ES 537-2000 Drugs—Dissolution Testing of Tablets and Capsules
TR-TSE
- TS 3152-1978 Rubber Latices - Determination Of Coagulum
- TS 1861-1975 CINEMATOGRAPHY — MOTION — PICTURE SAFETY F?LM — DEFINITION, TESTING AND MARKING
British Standards Institution (BSI)
- BS EN ISO 11699-2:2018 Non-destructive testing. Industrial radiographic films. Control of film processing by means of reference values
- BS ISO 15040:1999 Composites - Prepregs - Determination of gel time
- BS ISO 706:2004 Rubber latex - Determination of coagulum content (sieve residue)
- BS 5350-B5:1976 Methods of test for adhesives - Determination of gelation time
AT-ON
- ONORM A 2106-1989 Projectors for 16 mm filmfor educational purposes;lest specifications
South African Bureau of Standard
- SANS 10141:2007 The processing, testing and storage of silver-gelatin microfilm for archival purposes
Institute of Electrical and Electronics Engineers (IEEE)
- SMPTE ST 183:1996 ST 183:1996 - SMPTE Standard - For Motion-Picture Film — Photographic Audio Level Test Films – Measurement of Photoelectric Output Factor
American National Standards Institute (ANSI)
- ANSI IT9.4-1988 Imaging Media (Film) - Lubrication on Films - Method for Determining
RU-GOST R
- GOST 24923-1981 Latexes. Determination of coagulum content
- GOST R 57779-2017 Plastics. Phenolic resins. Determination of gel time on a test plate
- GOST 28643-1990 Rubber latex. Determination of coagulum content (sieve residue)
- GOST 23016-1978 Rubber. Method for the determination of the tear resistance on test strips
- GOST 25183.8-1982 Photographic gelatine. Method of determination of jelly hardness
- GOST 11477-1965 Motion picture film. Determination of strinkage
European Committee for Standardization (CEN)
- EN 2547:1989 Filming of Documents Microfilm 105 mm (Microfiche A6)
- EN ISO 10339:1999 Ophthalmic Optics - Contact Lenses - Determination of Water Content of Hydrogel Lenses ISO 10339: 1997
German Institute for Standardization
- DIN 15540-3:1982 Film 17,5 mm and film 35 mm; dimensions of tape splices for film 35 mm
- DIN 19053:1991 Microfilm aperture card for film 35 mm
- DIN EN 12681-1:2018-02 Founding - Radiographic testing - Part 1: Film techniques; German version EN 12681-1:2017
- DIN 15576-3:1980-09 Designation of cine films and magnetic films; labelling of containers for unexposed motion-picture films and magnetic films
KR-KS
- KS M 6402-2018(2023) Testing methods of wet gel strength for compounded latex
- KS X ISO 6197-1-2002 Microfilming of press cuttings-Part 1:16 mm Silver-gelatin type roll microfilm
- KS T 1028-2018(2023) Test method of pressure-sensitive adhesive tapes and sheets
International Organization for Standardization (ISO)
- ISO 706:1975 Title missing - Legacy paper document
- ISO 706:1976 Rubber latices — Determination of coagulum content
- ISO 10339:1997 Ophthalmic optics - Contact lenses - Determination of water content of hydrogel lenses
- ISO 8507:1986 Agglomerated cork discs; Methods of test
- ISO 6077:1980 Photography — Determination of brittleness of photographic film — Wedge brittleness test
- ISO 706:2004 Rubber latex - Determination of coagulum content (sieve residue)
- ISO 706:1985 Rubber latex; Determination of coagulum content (sieve residue)
- ISO 17278:2013 Rubber, raw natural.Determination of the gel content of technically specified rubber (TSR)
VDI - Verein Deutscher Ingenieure
- VDI 3491 BLATT 4-2016 Messen von Partikeln - Herstellungsverfahren fuer Pruefaerosole - Kondensationsverfahren
GSO
- GSO ISO 18907:2013 Imaging materials -- Photographic films and papers -- Wedge test for brittleness
- GSO 2165:2011 Chemical cleaners - Gel cleaner for multi-uses – Test methods
- BH GSO 2165:2012 Chemical cleaners - Gel cleaner for multi-uses – Test methods
- OS GSO 2165:2011 Chemical cleaners - Gel cleaner for multi-uses – Test methods
- GSO ISO 17278:2016 Rubber, raw natural -- Determination of the gel content of technically specified rubber (TSR)
- OS GSO ISO 17278:2016 Rubber, raw natural -- Determination of the gel content of technically specified rubber (TSR)
- BH GSO ISO 17278:2017 Rubber, raw natural -- Determination of the gel content of technically specified rubber (TSR)
Association Francaise de Normalisation
- NF B57-058*NF ISO 8507:2002 Agglomerated cork discs -Test methods
- NF A04-190-1*NF EN 12681-1:2017 Founding - Radiographic testing - Part 1 : Film techniques
- NF EN 666:1995 Resilient Flooring – Determination of Gelling
- NF T42-010*NF ISO 706:2005 Rubber latex - Determination of coagulum content (sieve residue)
- NF T42-010:1997 Rubber latex. Determination of coagulum content (sieve residue).
- NF EN 2547:1987 Recording documents on film - 105 mm microfilm (A6 microfiche)
- NF S24-501:1966 Cinematography. Dimensions of 70 mm cine film stock.
- NF S24-201:1960 CINEMATOGRAPHY. DIMENSIONS OF 9.5 MM NEGATIVE RAW STOCK.
- NF EN 2499:1987 Composition en sortie d'ordinateur sur microforme (COM) - Microfiche A6
- NF S24-401:1966 Cinematography. Dimensions of 65 mm cine film stock.
VN-TCVN
- TCVN 6317-2007 Rubber latex.Determination of coagulum content (sieve residue)
IT-UNI
- UNI 7087-1972 Concrete. Anti-regression assay for gel and melt cycles