Dielectric losses in motors
Dielectric losses in motors, Total:272 items.
The international standard classification for "Dielectric losses in motors" includes: Insulation systems , Paper and plastics capacitors , Rotating machinery in general , Rubber , Paper and board , Electronic components in general , Insulating gases , Paper and board insulating materials , Electrical wires and cables , Other insulating materials , Insulating materials in general , Other standards related to electricity and magnetism , Electric traction equipment , Other standards related to rotating machinery , Motors .
The Chinese standard classification for "Dielectric losses in motors" includes: Technical Management , Technical management , Paper , Electric rotating machinery in general , Rubber products in general , Special electronic technology material , Basic standard and general method for synthetic rubber , Electrical insulating material and its products , Cable and its accessory , Electric traction equipment , Radio Measurement , Hydraulic and pneumatic device , Basic standards and general methods .
Professional Standard - Electron
- SJ/T 1147-1993 Test method for dielectric loss angle tangent and dielectric canstant of organic film for use in capacitors
- SJ/Z 9181-1995 Specifications for determination of low-loss aluminum electrolytic capacitors used for VCR
- SJ/T 11043-1996 Test method for high frequency dielectric losses and permittivity of electronic glass
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China
- GB/T 3048.11-2007 Test methods for electrical properties of electric cables and wires—Part 11:Test for dielectric dissipation factor
- GB/T 14217-1993 Method of test for dielectric dissipation factor (tanδ) of capacitor paper at power frequence
- GB/T 21216-2007 insulating liquids - Determination of the dielectric dissipation factor by measurement of the conductance and capacitance - Test method
- GB/T 11297.9-2015 Test method for dielectric tangent of loss angle of pyroelectric materials
- GB/T 5654-2007 Insulating liquids - Measurement of relative permittivity dielectric dissipation factor(tanδ)and d.c. resistivity
- GB/T 1693-2007 Rubber vulcanized—Determination of dielectric constant and dielectric loss tangent
- GB/T 3334-1999 Method of test for dissipation factor ( tgδ)of cable paper at power frequence (Schering bridge method)
- GB/T 11297.9-1989 Test method for dielectric tangent of loss angle of pyroelectric material
- GB/T 1694-1981 Vulcanized rubber--Test method for HF dielectric constant and dielectric loss angular tangent value
- GB/T 31838.8-2024 Solid insulating materials—Dielectric and resistive properties—Part 8:Determination of dielectric properties(AC method)—Relative permittivity and dielectric dissipation factor(frequencies 1 MHz~300 MHz)
- GB/T 5321-2005 Measurement of loss and efficiency for electrical machine by the calorimetric method
- GB/T 5654-1985 Measurement of relative permittivity,dielectric dissipation factor at power frequency and volume resistivity of insulating liquids
- GB/T 34665-2017 Measurement method of dielectric dissipation factor of electric machinery coil/winding insulation
- GB/T 34861-2017 Specific methods for determining separate losses of large machines from tests
- GB/T 755.2-2003 Methods for determining losses and efficiency of rotating electrical machinery from tests(excluding machines for traction vehicles)
- GB/T 25123.3-2011 Electric tracion—Rotating electrical machines for rail and road vehicles—Part 3:Determination of the total losses of convertor-fed alternating current motors by summation of the component losses
- GB/T 20833.3-2018 Rotating electrical machines—Stator winding insulation of rotating electrical machines—Part 3:Dielectric dissipation factor measurement
- GB/T 25442-2018 Standard methods for determining losses and efficiency of rotation electricalmachines from tests(excluding machines for traction vehicles)
- GB/T 25442-2010 Standard methods for determining losses and efficiency of rotating electrical machines from tests(excluding machines for traction vehicles)
- GB/T 1693-1981 Vulcanized rubber--Determination for industrial frequency dielectric constant and dielectricloss angular tangent value
- GB/T 31838.6-2021 Solid insulating materials—Dielectric and resistive properties—Part 6:Dielectric properties(AC method)—Relative permittivity and dielectric dissipation factor(frequencies 0.1Hz~10 MHz)
National Metrological Technical Specifications of the People's Republic of China
- JJF 1095-2002 Calibration Specification for Capacitor Dielectric Loss Meters
- JJF 1618-2017 Calibration Specification for Insulating Oil Dielectric Dissipation Factor and Volume Resistivity Testers
Group Standards of the People's Republic of China
- T/CSEE 0032-2017 Relative dielectric loss factor and capacitance ratio live test method of capacitive equipment
- T/CSTM 00985-2023 Test method for the complex permittivity of low-loss dielectric plates-Split-cylinder resonator method
- T/CSTM 00990-2023 Test method for dielectric constant and dielectric loss tangent in millimeter wave frequency range — Quasi-optical cavity method
Professional Standard - Machinery
- JB/T 7608-1994 Test method and limit value of dielectric loss tangent of high voltage AC motor coil
- JB/T 7608-2006 Methods and limits for testing the dissipation factor tan δon winding of high voltage AC machine
Professional Standard - Energy and Power Planning
- DL/T 474.3-1992 Guide for Insulation Test on Site Dielectric Dissipation Factor Test
- DL/T 2603-2023 Energized testing methods for relative dielectric loss factor and capacitance ratio of capacitive equipment
- DL/T 1154-2012 Guide for Dielectric Dissipation Factor Test on Rating Voltage of High Voltage Electrical Equipment
Professional Standard - Aerospace
- QJ 1990.3-1990 Electrical performance test method of electrical insulating adhesives Dielectric loss angle at power frequency and high frequency
State Grid Corporation of China
- Q/GDW 1895-2013 Guidelines for field application of dielectric dissipation factor and capacitance live test technology for capacitive equipment
British Standards Institution (BSI)
- BS EN 60034-27-3:2016 Rotating electrical machines. Dielectric dissipation factor measurement on stator winding insulation of rotating electrical machines
- BS DD IEC/PAS 62562:2008 Cavity resonator method to measure the complex permittivity of low-loss dielectric plates
- BS EN 62562:2011 Cavity resonator method to measure the complex permittivity of low-loss dielectric plates
- 09/30174252 DC BS EN 62562. Cavity resonator method to measure the complex permittivity of low-loss dielectric plates
- BS EN 60512-25-2:2002 Connectors for electronic equipment - Tests and measurements - Test 25b - Attenuation (insertion loss) - Section 2 Attenuation (insertion loss)
- PAS 62562-2008 Cavity resonator method to measure the complex permittivity of low-loss dielectric plates (Edition 1.0)
- BS 5737:1979 Method for the measurement of relative permittivity, dielectric dissipation factor and d.c. resistivity of insulating liquids
- 13/30281457 DC BS EN 62810. Cylindrical cavity method to measure the complex permittivity of low-loss dielectric rods
- BS EN 62810:2015 Cylindrical cavity method to measure the complex permittivity of low-loss dielectric rods
- BS IEC 61196-1-125:2022 Coaxial communication cable - Electrical test methods. Test for equivalent permittivity and equivalent dissipation factor of dielectric
- 21/30435996 DC BS IEC 61196-1-125. Coaxial communication cable. Part 1-125. Electrical test methods. Test for equivalent permittivity and equivalent dissipation loss of dielectric
- BS EN IEC 63185:2021 Measurement of the complex permittivity for low-loss dielectric substrates balanced-type circular disk resonator method
- 18/30373795 DC BS EN 63185. Balanced-type circular disk resonator method to measure the complex permittivity of low-loss dielectric substrates
- 23/30461071 DC BS EN IEC 63185 Measurement of the complex permittivity for low-loss dielectric substrates balanced-type circular disk resonator method
- BS EN IEC 63185:2025 Measurement of the complex permittivity for low-loss dielectric substrates balanced-type circular disk resonator method
- BS EN IEC 62631-2-2:2022 Dielectric and resistive properties of solid insulating materials - Relative permittivity and dissipation factor. High frequencies (1 MHz to 300 MHz). AC methods
- BS EN 60247:2004 Insulating liquids - Measurement of relative permittivity, dielectric dissipation factor (tan
) and d.c. resistivity - BS 4542:1970 Method for determination of loss tangent and permittivity of electrical insulating materials in sheet form (Lynch method)
- BS 7663:1993(2000) Methods of test for Determination of permittivity and dissipation factor of electrical insulating material in sheet or tubular form
- BS EN 61620:1999 Insulating liquids. Determination of the dielectric dissipation factor by measurement of the conductance and capacitance. Test method
- BS IEC 60287-1-2:2023 Electric cables. Calculation of the current rating - Current rating equations (100 % load factor) and calculations of losses. Sheath eddy current loss factors for two circuits in flat formation
- 25/30442613 DC Draft BS EN 63405 High-voltage test techniques. Dielectric loss measurements PROPOSED HORIZONTAL STANDARD
- BS 7769-1.2:1994 Electric cables. Calculation of the current rating. Current rating equations (100% load factor) and calculation of losses. Sheath eddy current loss factors for two circuits in flat formation
- 20/30425177 DC BS IEC 62631-2-2. Dielectric and resistive properties of solid insulating materials. Part 2-2. Relative permittivity and dielectric dissipation factor. High frequencies (1 MHz to 300 MHz). AC Methods
RO-ASRO
- STAS 2740-1969 Electrical insulation materials. Determination of dielectric constant and dielectric loss angle
- STAS 6799-1981 INSULATING MINERAL OILS Determinations of the permittivity and of the dielectric loss tangent
Association for Electrical, Electronic & Information Technologies (VDE)
- VDE 0472-505-1983 Testing of cables@ wires and flexible cords; loss factor@ dielectric loss coefficient and leakance [VDE Specification]
- VDE 0380-2-1996*DIN IEC 60247:1996 Measurement of relative permittivity, dielectric dissipation factor and d.c. resistivity of insulating liquids
- VDE 0380-2-2005 Insulating liquids - Measurement of relative permittivity@ dielectric dissipation factor (tan δ) and d.c. resistivity (IEC 60247:2004); German version EN 60247:2004
- VDE 0307-2-2 E*DIN EN IEC 62631-2-2:2021-07 Dielectric and resistive properties of solid insulating materials — Part 2-2: Relative permittivity and dielectric dissipation factor — High frequencies (1 MHz to 300 MHz) — AC Methods
American Society for Testing and Materials (ASTM)
- ASTM D1082-17 Standard Test Method for Dissipation Factor and Permittivity (Dielectric Constant) of Mica
- ASTM D2149-13 Standard Test Method for Permittivity (Dielectric Constant) And Dissipation Factor Of Solid Ceramic Dielectrics At Frequencies To 10 MHz And Temperatures To 500°C
- ASTM D1082-17(2024) Standard Test Method for Dissipation Factor and Permittivity (Dielectric Constant) of Mica
- ASTM D150-87 Standard Test Methods for A-C Loss Characteristics and Permittivity (Dielectric Constant) of Solid Electrical Insulating Materials
- ASTM D150-18 Standard Test Methods for AC Loss Characteristics and Permittivity (Dielectric Constant) of Solid Electrical Insulation
- ASTM D150-98(2004) Standard Test Methods for AC Loss Characteristics and Permittivity (Dielectric Constant) of Solid Electrical Insulation
- ASTM D150-98 Standard Test Methods for AC Loss Characteristics and Permittivity (Dielectric Constant) of Solid Electrical Insulation
- ASTM D3380-14 Standard Test Method for Relative Permittivity (Dielectric Constant) and Dissipation Factor of Polymer-Based Microwave Circuit Substrates
- ASTM RR-D27-1015 2003 D0924-Test Method for Dissipation Factor (or Power Factor) and Relative Permittivity (Dielectric Constant) of Electrical Insulating Liquids
- ASTM D2149-97(2004) Standard Test Method for Permittivity (Dielectric Constant) And Dissipation Factor Of Solid Ceramic Dielectrics At Frequencies To 10 MHz And Temperatures To 500&176C
- ASTM D2149-97 Standard Test Method for Permittivity (Dielectric Constant) And Dissipation Factor Of Solid Ceramic Dielectrics At Frequencies To 10 MHz And Temperatures To 500176C
- ASTM D3380-22 Standard Test Method for Relative Permittivity (Dielectric Constant) and Dissipation Factor of Polymer-Based Microwave Circuit Substrates
- ASTM D3380-90(1995)e1 Standard Test Method for Relative Permittivity (Dielectric Constant) and Dissipation Factor of Polymer-Based Microwave Circuit Substrates
- ASTM D2149-13(2021) Standard Test Method for Permittivity (Dielectric Constant) and Dissipation Factor of Solid Dielectrics at Frequencies to 10 MHz and Temperatures to 500 °C
- ASTM D150-11 Standard Test Methods for AC Loss Characteristics and Permittivity (Dielectric Constant) of Solid Electrical Insulation
- ASTM D924-08 Standard Test Method for Dissipation Factor (or Power Factor) and Relative Permittivity (Dielectric Constant) of Electrical Insulating Liquids
- ASTM D924-15 Standard Test Method for Dissipation Factor (or Power Factor) and Relative Permittivity (Dielectric Constant) of Electrical Insulating Liquids
- ASTM D924-99e2 Standard Test Method for Dissipation Factor (or Power Factor) and Relative Permittivity (Dielectric Constant) of Electrical Insulating Liquids
- ASTM D924-99e1 Standard Test Method for Dissipation Factor (or Power Factor) and Relative Permittivity (Dielectric Constant) of Electrical Insulating Liquids
- ASTM D924-04 Standard Test Method for Dissipation Factor (or Power Factor) and Relative Permittivity (Dielectric Constant) of Electrical Insulating Liquids
- ASTM D924-03a Standard Test Method for Dissipation Factor (or Power Factor) and Relative Permittivity (Dielectric Constant) of Electrical Insulating Liquids
- ASTM D924-03 Standard Test Method for Dissipation Factor (or Power Factor) and Relative Permittivity (Dielectric Constant) of Electrical Insulating Liquids
- ASTM D1673-94(2004) Standard Test Methods for Relative Permittivity And Dissipation Factor of Expanded Cellular Polymers Used For Electrical Insulation
- ASTM D1673-94(1998) Standard Test Methods for Relative Permittivity And Dissipation Factor of Expanded Cellular Polymers Used For Electrical Insulation
- ASTM D3380-10 Standard Test Method for Relative Permittivity (Dielectric Constant) and Dissipation Factor of Polymer-Based Microwave Circuit Substrates
Korean Agency for Technology and Standards (KATS)
- KS C 2150-2008 Measuring method of dielectric constant and dielectric loss of dielectric thin film at the high frequency ranges(500 MHz∼10 GHz)
- KS C 2150-2008(2018) Measuring method of dielectric constant and dielectric loss of dielectric thin film at the high frequency ranges(500 MHz∼10 GHz)
- KS C 2150-2023 Measuring method of dielectric constant and dielectric loss of dielectric thin film at the high frequency ranges(500 MHz∼10 GHz)
- KS C 2150-2008(2023) Measuring method of dielectric constant and dielectric loss of dielectric thin film at the high frequency ranges(500 MHz∼10 GHz)
- KS C 2135-1996(2021) Testing methods for AC loss characteristics and permittivity(Dielectric constant) of solid electrical insulation
- KS C 2135-2021 Testing methods for AC loss characteristics and permittivity(Dielectric constant) of solid electrical insulation
- KS C IEC 60034-27-3-2024 Rotating electrical machines — Part 27-3: Dielectric dissipation factor measurement on stator winding insulation of rotating electrical machines
- KS C IEC 60034-27-3-2019 Rotating electrical machines — Part 27-3: Dielectric dissipation factor measurement on stator winding insulation of rotating electrical machines
- KS C IEC 60034-27-3-2019(2024) Rotating electrical machines — Part 27-3: Dielectric dissipation factor measurement on stator winding insulation of rotating electrical machines
- KS C IEC 60034-27-3:2019 Rotating electrical machines — Part 27-3: Dielectric dissipation factor measurement on stator winding insulation of rotating electrical machines
- KS C 2135-1996(2016) Testing methods for AC loss characteristics and permittivity(Dielectric constant) of solid electrical insulation
- KS C IEC 60250-2020 Recommended methods for the determination of the permittivity and dielectric dissipation factor of electrical insulating materials at power, audio and radio frequencies including metre wavelengths
- KS C IEC TS 60349-3:2021 Electric traction — Rotating electrical machines for rail and road vehicles — Part 3: Determination of the total losses of converter-fed alternating current motors by summation of the component losses
- KS C IEC 60349-3-2005(2015) Electric traction-Rotating electrical machines for railand road vehicles-Part 3:Determination of the total lossesof convertor-fed alternating current motors by summationof the component losses
- KS C IEC TS 60349-3-2021 Electric traction — Rotating electrical machines for rail and road vehicles — Part 3: Determination of the total losses of converter-fed alternating current motors by summation of the component losses
- KS C IEC 62631-2-1:2020 Dielectric and resistive properties of solid insulating materials —Part 2-1: Relative permittivity and dissipation factor —Technical frequencies(0.1 Hz ~ 10 MHz) — AC methods
- KS C IEC 62631-2-1-2020 Dielectric and resistive properties of solid insulating materials —Part 2-1: Relative permittivity and dissipation factor —Technical frequencies(0.1 Hz ~ 10 MHz) — AC methods
- KS C 2134-1996(2016) Testing method for dissipation factor and permittivity parallel with laminations of laminated sheet and plate materials
IPC - Association Connecting Electronics Industries
- IPC TM-650 2.5.5.3C-1987 Permittivity (Dielectric Constant) and Loss Tangent (Dissipation Factor) of Materials (Two Fluid Cell Method)
- IPC TM-650 2.5.5.5C-1998 Stripline Test for Permittivity and Loss Tangent (Dielectric Constant and Dissipation Factor) at X-Band
- IPC TM-650 2.5.5.5B-1995 Stripline Test for Permittivity and Loss Tangent (Dielectric Constant and Dissipation Factor) at X-Band
- IPC TM-650 2.5.5.1B-1986 Permittivity (Dielectric Constant) and Loss Tangent (Dissipation Factor) of Insulating Material at 1 MHz (Contacting Electrode Systems)
Spanish Association for Standardization (UNE)
- UNE-EN 62562:2011 Cavity resonator method to measure the complex permittivity of low-loss dielectric plates (Endorsed by AENOR in June of 2011.)
- UNE-EN 62810:2015 Cylindrical cavity method to measure the complex permittivity of low-loss dielectric rods (Endorsed by AENOR in July of 2015.)
- UNE-EN 60034-27-3:2016 Rotating electrical machines - Part 27-3: Dielectric dissipation factor measurement on stator winding insulation of rotating electrical machines (Endorsed by AENOR in August of 2016.)
- UNE-EN 60247:2004 ERRATUM:2005 Insulating liquids - Measurement of relative permittivity, dielectric dissipation factor (tan d) and d.c. resistivity
- UNE-EN 60247:2004 Insulating liquids - Measurement of relative permittivity, dielectric dissipation factor (tan d) and d.c. resistivity
- UNE-EN IEC 63185:2021 Measurement of the complex permittivity for low-loss dielectric substrates balanced-type circular disk resonator method
German Institute for Standardization
- DIN 57472-505:1983-04 Testing of cables, wires and flexible cords; loss factor, dielectric loss coefficient and leakance [VDE Specification]
- DIN VDE 0472-505:1983-04 Testing of cables, wires and flexible cords; loss factor, dielectric loss coefficient and leakance [VDE Specification]
- DIN 57472-505:1983 Testing of cables, wires and flexible cords; loss factor, dielectric loss coefficient and leakance [VDE Specification]
- DIN EN 62810:2015-12 Cylindrical cavity method to measure the complex permittivity of low-loss dielectric rods (IEC 62810:2015); German version EN 62810:2015
- DIN EN 62562:2011-10 Cavity resonator method to measure the complex permittivity of low-loss dielectric plates (IEC 62562:2010); German version EN 62562:2011
- DIN 51111:2024-02 Electrical properties of fresh and used oils from electric drives in vehicles - Measurement of the specific electrical conductivity, the relative permittivity (<epsilon><(Index)r>) and the dielectric dissipation factor (tan <delta>)
- DIN EN IEC 63185:2022 Measurement of the complex dielectric constant for low-loss dielectric substrates using the symmetrical circular disk resonator method
- DIN IEC/TS 60034-27-3:2012 Rotating electrical machines - Part 27-3: Dielectric dissipation factor measurement on stator winding insulation of rotating electrical machines (IEC 2/1651/CD:2011)
- DIN EN 60034-27-3:2016 Rotating electrical machines - Part 27-3: Dielectric dissipation factor measurement on stator winding insulation of rotating electrical machines (IEC 60034-27-3:2015); German version EN 60034-27-3:2016
- DIN EN 62562 E:2009-08 Draft Document - Cavity resonator method to measure the complex permittivity of low-loss dielectric plates (IEC 46F/118/CDV:2009); German version FprEN 62562:2009
- DIN EN 62562 E:2009 Draft Document - Cavity resonator method to measure the complex permittivity of low-loss dielectric plates (IEC 46F/118/CDV:2009); German version FprEN 62562:2009
- DIN IEC /TS 60034-27-3 E:2012 Draft Document - Rotating electrical machines - Part 27-3: Dielectric dissipation factor measurement on stator winding insulation of rotating electrical machines (IEC 2/1651/CD:2011)
- DIN EN 62810 E:2013 Draft Document - Cylindrical cavity method to measure the complex permittivity of low-loss dielectric rods (IEC 46F/228/CD:2013)
- DIN EN 62810 E:2013-08 Cylindrical cavity method to measure the complex permittivity of low-loss dielectric rods
- DIN IEC /TS 60034-27-3 E:2012-04 Draft Document - Rotating electrical machines - Part 27-3: Dielectric dissipation factor measurement on stator winding insulation of rotating electrical machines (IEC 2/1651/CD:2011)
- DIN EN 60247:2005 Insulating liquids - Measurement of relative permittivity, dielectric dissipation factor (tan
) and d.c. resistivity (IEC 60247:2004); German version EN 60247:2004 - DIN 51111 E:2023-04 Draft Document - Electrical properties of fresh and used oils from electric drives in vehicles - Measurement of the specific electrical conductivity, the relative permittivity (?<(Index)r>) and the dielectric dissipation factor (tan ?)
- DIN EN IEC 63185:2022-10 Measurement of the complex permittivity for low-loss dielectric substrates balanced-type circular disk resonator method (IEC 63185:2020); German version EN IEC 63185:2021
- DIN EN 63185:2018-09 Draft Document - Balanced-type circular disk resonator method to measure the complex permittivity of low-loss dielectric substrates (IEC 46F/415/CD:2018); Text in German and English
- DIN 51111:2024 Electrical properties of fresh and used oils from electric drives in vehicles - Measurement of the specific electrical conductivity, the relative permittivity (?<(Index)r>) and the dielectric dissipation factor (tan ?)
- DIN EN 63185:2018 Balanced-type circular disk resonator method to measure the complex permittivity of low-loss dielectric substrates (IEC 46F/415/CD:2018); Text in German and English
- DIN 51111 E:2023 Draft Document - Electrical properties of fresh and used oils from electric drives in vehicles - Measurement of the specific electrical conductivity, the relative permittivity (?<(Index)r>) and the dielectric dissipation factor (tan ?)
- DIN EN 61620:1999 Insulating liquids - Determination of the dielectric dissipation factor by measurement of the conductance and capacitance - Test method (IEC 61620:1998); German version EN 61620:1999
- DIN EN 60247:2005-01 Insulating liquids - Measurement of relative permittivity, dielectric dissipation factor (tan
) and dc resistivity (IEC 60247:2004); German version EN 60247:2004 - DIN EN 63185 E:2018 Draft Document - Balanced-type circular disk resonator method to measure the complex permittivity of low-loss dielectric substrates (IEC 46F/415/CD:2018); Text in German and English
GOST
- GOST R 71338-2024 Electro-optical elements. Methods for measuring the tangent of dielectric loss angle
- GOST R 71602-2024 Inorganic dielectrics. Method for determining the dielectric constant and the tangent of the dielectric loss angle at a frequency of 1 MHz
- GOST R 71601-2024 Inorganic dielectrics. Method for determining the relative permittivity and the tangent of the dielectric loss angle in the frequency range from 2.5 to 3.5 GHz
- GOST R 71432-2024 Microwave ferrite devices and products made of them. Methods for measuring the complex relative permittivity and the tangent of the dielectric loss angle
PL-PKN
- PN E04403-1986 Solide electric insulating materials Measurements of the permittivity and dielectric dissipation factor
- PN E04410-22-1986 Electroinsulating varnishes Test methods Testing of dissipation factor and permittivity
- PN-EN IEC 63185-2021-08 E Measurement of the complex permittivity for low-loss dielectric substrates balanced-type circular disk resonator method (IEC 63185:2020)
CZ-CSN
- CSN 72 5041-1973 Testing oí fired ceramic materials. Determination of the permitivity and dielectric dissipation factor
- CSN 34 6466-1983 Methods of test for the determination of the permittivity and dielectric dissipation factor of electrical insulating materials
- CSN 34 6317-1984 Testing of ceramic electrotechnic materials.Method of the determination of the permitivity and dielectric dissipation factor
- CSN 34 7010 Cast.41-1986 Dissipation factor measurement ot power cables
European Committee for Electrotechnical Standardization(CENELEC)
- EN 62810:2015 Cylindrical cavity method to measure the complex permittivity of low-loss dielectric rods
- EN 60034-27-3:2016 Rotating electrical machines - Part 27-3: Dielectric dissipation factor measurement on stator winding insulation of rotating electrical machines
- EN 62562:2011 Cavity resonator method to measure the complex permittivity of low-loss dielectric plates
- EN IEC 63185:2021 Measurement of the complex permittivity for low-loss dielectric substrates balanced-type circular disk resonator method
- EN 61620:1999 Insulating liquids Determination of the dielectric dissipation factor by measurement of the conductance and capacitance Test method
- EN 60247:2004 Insulating liquids Measurement of relative permittivity, dielectric dissipation factor (tan $) and d.c. resistivity
Association Francaise de Normalisation
- NF C26-232*NF EN 62810:2018 Cylindrical cavity method to measure the complex permittivity of low-loss dielectric rods
- NF EN 62810:2018 Measurement of the complex permitivity of low-loss dielectric rods using the cylindrical cavity method
- NF C26-296*NF EN 62562:2011 Cavity resonator method to measure the complex permittivity of low-loss dielectric plates.
- NF EN 62562:2011 Resonant cavity method for measuring the complex permittivity of low-loss dielectric plates
- NF C51-127-3*NF EN 60034-27-3:2016 Rotating electrical machines - Part 27-3 : dielectric dissipation factor measurement on stator winding insulation of rotating electrical machines
- NF EN 60247:2004 Insulating liquids - Measurement of relative permittivity, dielectric dissipation factor (tan delta) and DC resistivity
- NF C27-210:1979 Measurement of relative permittivity dielectric dissipation factor and D.C. Resistivity of insulating liquids.
- NF EN IEC 63185:2021 Symmetric-type circular disk resonator method for measuring the complex permittivity of low-loss dielectric substrates
- NF C27-210*NF EN 60247:2004 Insulating liquids - Measurement of relative permittivity, dielectric dissipation factor (tan delta) and d.c.resistivity
- NF EN 61620:1999 Liquid insulators - Determination of dielectric dissipation factor by measuring conductance and capacitance - Test method
- NF EN IEC 62631-2-2:2022 Dielectric and resistive properties of solid insulating materials - Part 2-2: Relative permittivity and dissipation factor - High frequencies (1 MHz to 300 MHz) - Alternating current methods
- NF EN IEC 62631-2-3:2024 Dielectric and resistive properties of solid insulating materials - Part 2-3 : relative permittivity and dissipation factor - Contact electrode method for insulating films - AC methods
Japanese Industrial Standards Committee (JISC)
- JIS C 2138:2007 Electrical insulating materials -- Methods for the determination of the relative permittivity and dielectric dissipation factor
International Electrotechnical Commission (IEC)
- IEC PAS 62562:2008 Cavity resonator method to measure the complex permittivity of low-loss dielectric plates
- IEC 60034-27-3:2015 Rotating electrical machines - Part 27-3: Dielectric dissipation factor measurement on stator winding insulation of rotating electrical machines
- IEC 62810:2015 Cylindrical cavity method to measure the complex permittivity of low-loss dielectric rods
- IEC 63185:2025 PRV Measurement of the complex permittivity for low-loss dielectric substrates balanced-type circular disk resonator method
- IEC 63185:2025 Measurement of the complex permittivity for low-loss dielectric substrates balanced-type circular disk resonator method
- IEC 60247:1978 Measurement of relative permittivity, dielectric dissipation factor and d.c. resistivity of insulating liquids
- IEC 63185:2025 RLV Measurement of the complex permittivity for low-loss dielectric substrates balanced-type circular disk resonator method
- IEC 63185:2020 Measurement of the complex permittivity for low-loss dielectric substrates balanced-type circular disk resonator method
- IEC 61620:1998 Insulating liquids - Determination of dielectric dissipation factor by measurement of the conductance and capacitance - Test method
- IEC 2/1651/CD:2011 IEC/TS 60034-27-3, Ed. 1: Rotating electrical machines - Part 27-3: Dielectric dissipation factor measurement on stator winding insulation of rotating electrical machines
- IEC 9/1135/CD:2008 Electric traction - Rotating electrical machines for rail and road vehicles - Part 3: Determination of the total losses of converter-fed alternating current motors by summation of the component losses
- IEC 60247:2004 Insulating liquids - Measurement of relative permittivity, dielectric dissipation factor (tan
) and d.c. resistivity - IEC TS 60349-3:1995 Electric traction - Rotating electrical machines for rail and road vehicles - Part 3: Determination of the total losses of convertor-fed alternating current motors by summation of the component losses
- IEC TR2 60349-3:1995 Electric traction - Rotating electrical machines for rail and road vehicles - Part 3: Determination of the total losses of convertor-fed alternating current motors by summation of the component losses
- IEC TS 60349-3:2010 Electric traction - Rotating electrical machines for rail and road vehicles - Part 3: Determination of the total losses of converter-fed alternating current motors by summation of the component losses
- IEC 62631-2-2:2022 Dielectric and resistive properties of solid insulating materials - Part 2-2: Relative permittivity and dissipation factor - High frequencies (1 MHz to 300 MHz) - AC methods
- IEC 62631-2-3:2024 Dielectric and resistive properties of solid insulating materials - Part 2-3: Relative permittivity and dissipation factor - Contact electrode method for insulating films - AC methods
- IEC 60034-2A:1974 Rotating electrical machines Part 2: Methods for determining losses and efficiency of rotating electrical machinery from tests (excluding machines for traction vehicles) Measurement of losses by the calorimetric method (Edition 1.0; First Supplment to pub
- IEC 60996:1989 Method for verifying accuracy of tan delta measurements applicable to capacitors
Danish Standards Foundation
- DANSK DS/EN 60034-27-3:2016 Rotating electrical machines – Part 27-3: Dielectric dissipation factor measurement on stator winding insulation of rotating electrical machines
- DANSK DS/EN 62810:2015 Cylindrical cavity method to measure the complex permittivity of low-loss dielectric rods
- DS/EN 62562:2011 Cavity resonator method to measure the complex permittivity of low-loss dielectric plates
- DANSK DS/EN 62562:2011 Cavity resonator method to measure the complex permittivity of low-loss dielectric plates
- DANSK DS/EN 60247:2004 Insulating liquids - Measurement of relative permittivity, dielectric dissipation factor (tan phi) and d.c. resistivity
- DS/EN 60247:2004 Insulating liquids - Measurement of relative permittivity, dielectric dissipation factor (tan phi) and d.c. resistivity
- DANSK DS/EN IEC 63185:2021 Measurement of the complex permittivity for low-loss dielectric substrates balanced-type circular disk resonator method
- DS/EN IEC 63185:2021 Measurement of the complex permittivity for low-loss dielectric substrates balanced-type circular disk resonator method
- DS/EN 61620:1999 Insulating liquids - Determination of the dielectric dissipation factor by measurement of the conductance and capacitance - Test method
- DANSK DS/IEC 61196-1-125 ED1:2022 Coaxial communication cable – Part 1-125: Electrical test methods – Test for equivalent permittivity and equivalent dissipation factor of dielectric
- DANSK DS/EN 61620:1999 Insulating liquids - Determination of the dielectric dissipation factor by measurement of the conductance and capacitance - Test method
The Directorate General of Specifications and Metrology (DGSM)
- OS GSO IEC 62810:2017 Cylindrical cavity method to measure the complex permittivity of low-loss dielectric rods
- OS GSO IEC 62562:2013 Cavity resonator method to measure the complex permittivity of low-loss dielectric plates
- OS GSO IEC 60247:2015 Insulating liquids - Measurement of relative permittivity, dielectric dissipation factor (tan d) and d.c. resistivity
- OS GSO IEC 61620:2015 Insulating liquids - Determination of the dielectric dissipation factor by measurement of the conductance and capacitance - Test method
- OS GSO IEC 60250:2015 Recommended methods for the determination of the permittivity and dielectric dissipation factor of electrical insulating materials at power, audio and radio frequencies including metre wavelengths
Comitato Elettrotecnico Italiano
- CEI EN 62810:2015 Cylindrical cavity method to measure the complex permittivity of low-loss dielectric rods
- CEI EN 62562:2011 Cavity resonator method to measure the complex permittivity of low-loss dielectric plates
- CEI EN 60034-27-3:2016 Rotating electrical machines Part 27-3: Dielectric dissipation factor measurement on stator winding insulation of rotating electrical machines
- CEI EN 60247:2004 Insulating liquids - Measurement of relative permittivity, dielectric dissipation factor (tan δ) and d.c. resistivity
- CEI EN IEC 63185:2021 Measurement of the complex permittivity for low-loss dielectric substrates balanced-type circular disk resonator method
- CEI EN 61620:1999 Insulating liquids - Determination of the dielectric dissipation factor by measurement of the conductance and capacitance - Test method
Swedish Institute for Standards
- SS-EN 62810:2016 Cylindrical cavity method to measure the complex permittivity of low-loss dielectric rods
- SS-EN 60247:2004 Insulating liquids - Measurement of relative permittivity, dielectric dissipation factor and d.c. resistivity
- SS-EN 62562:2011 Cavity resonator method to measure the complex permittivity of low-loss dielectric plates
- SS-EN 61620:1999 Insulating liquids - Determination of the dielectric dissipation factor by measurement of the conductance and capacitance - Test method
- SS-EN IEC 62631-2-2:2022 Dielectric and resistive properties of solid insulating materials - Part 2-2: Relative permittivity and dissipation factor - High frequencies (1 MHz to 300 MHz) - AC methods
GCC Standardization Organization
- GSO IEC 62810:2017 Cylindrical cavity method to measure the complex permittivity of low-loss dielectric rods
- GSO IEC 60247:2015 Insulating liquids - Measurement of relative permittivity, dielectric dissipation factor (tan d) and d.c. resistivity
- GSO IEC 60250:2015 Recommended methods for the determination of the permittivity and dielectric dissipation factor of electrical insulating materials at power, audio and radio frequencies including metre wavelengths
- GSO IEC 61620:2015 Insulating liquids - Determination of the dielectric dissipation factor by measurement of the conductance and capacitance - Test method
- GSO IEC TS 60349-3:2014 Electric traction - Rotating electrical machines for rail and road vehicles - Part 3: Determination of the total losses of converter-fed alternating current motors by summation of the component losses
- GSO IEC 61788-13:2013 Superconductivity - Part 13: AC loss measurements - Magnetometer methods for hysteresis loss in Cu/Nb-Ti multifilamentary composites
Gosstandart of Russia
- GOST 22372-1977 Dielectric materials. Methods of determination of permittivity and powerfactor with in a frequency range of 100 to 5·10 in 6 degree Hz
- GOST 26127-1984 Electrical insulating paper. Method for determination of the dielectric loss tangent at 50 Hz frequency
- GOST 8.358-1979 State system for ensuring the uniformity of measurements. Method of making measurements of relative permittivity and dielectric loss tangent in the fregnency range of 0,2 to 1 GHz
- GOST R IEC 61620-2013 Insulating liquids. Determination of dielectric dissipation factor by measurement of the conductance and capacitance
- GOST IEC 60034-2A-2012 Rotating electrical machines. Part 2. Methods for determining losses and efficiency of rotating electrical machinery from tests (excluding machines for fraction vehicles). Measurement of losses by the calorimetric method
- GOST R IEC 60247-2013 Insulating liquids. Measurement of relative permittivity, dielectric dissipation factor (tan d) and d.c. resistivity
- GOST 25941-1983 Rotating electrical machines. Methods for determining losses and efficiency
- GOST R 8.623-2015 State system for ensuring the uniformity of measurements. Relative dielectric permittivity and the loss tangent of solid dielectrics. Procedure of measurements at microwave frequencies
- GOST R IEC 62562-2012 State system for ensuring the uniformity of measurements. Cavity resonator method to measure the complex permittivity of low-loss dielectric plates
Ente Nazionale Italiano di Unificazione
- UNI 4289:1972 Tests on plastics. Determination of permittivity and dielectric dissipation factor.
Bureau of Indian Standards
- IS 16840-2018 Insulating Liquids —— Measurement of Relative Permittivity, Dielectric Dissipation Factor (Tan ï¤) and d.c. Resistivity
- IS 16086-2013 Insulating Liquids - Determination of the Dielectric Dissipation Factor by Measurement of the Conductance and Capacitance - Test Method
American National Standards Institute (ANSI)
- ANSI/ASTM D150:2018 Standard Test Methods for AC Loss Characteristics and Permittivity (Dielectric Constant) of Solid Electrical Insulation
- ANSI/ASTM D150:2011 Test Methods for AC Loss Characteristics and Permittivity Dielectric Constant of Solid Electrical Insulation
- ANSI/ASA S12.8-1998 Methods for Determining the Insertion Loss of Outdoor Noise Barriers
Lithuanian Standards Office
- LST EN 62562-2011 Cavity resonator method to measure the complex permittivity of low-loss dielectric plates (IEC 62562:2010)
- LST EN IEC 63185:2021 Measurement of the complex permittivity for low-loss dielectric substrates balanced-type circular disk resonator method (IEC 63185:2020)
- LST EN 60247-2004 Insulating liquids. Measurement of relative permittivity, dielectric dissipation factor (tan
) and d.c. resistivity (IEC 60247:2004) - LST EN 61620-2001 Insulating liquids. Determination of the dielectric dissipation factor by measurement of the conductance and capacitance. Test method (IEC 61620:1998)
Institute of Interconnecting and Packaging Electronic Circuits (IPC)
- IPC TM-650 2.5.5.2-1987 Dielectric Constant and Dissipation Factor of Printed Wiring Board Material - Clip Method
- IPC TM-650 2.5.5.4-1985 Dielectric Constant and Dissipation Factor of Printed Wiring Board Material-Micrometer Method
- IPC TM-650.2.5.7.2-2009 Permittivity (Dielectric Constant) and Loss Tangent (Dissipation Factor) of Materials (Two Fluid Cell Method); Revision C - December 1987
- IPC TM-650 2.5.5.3-1987 Permittivity (Dielectric Constant) and Loss Tangent (Dissipation Factor) of Materials (Two Fluid Cell Method); Revision C - December 1987
- IPC TM-650-2015 Permittivity (Dielectric Constant) and Loss Tangent (Dissipation Factor) of Materials (Two Fluid Cell Method); Revision C - December 1987
- IPC TM-650 2.5.5.5-1998 Stripline Test for Permittivity and Loss Tangent (Dielectric Constant and Dissipation Factor) at X-Band Revision C
- IPC TM-650 2.5.5.9-1998 Permittivity and Loss Tangent, Parallel Plate, 1 MHz to 1.5 GHz
- IPC TM-650 2.5.5.1-1986 Permittivity (Dielectric Constant) and Loss Tangent (Dissipation Factor) of Insulating Material at 1 MHz (Contacting Electrode Systems); Revision B - May 1986
SE-SIS
- SIS SEN 26 01 21-1968 Electrical machines. Determination oj losses of synchronous generators in water power statlons
- SIS SEN 26 01 04-1965 Electrical machines Determination of losses and efficiency
Magyar Szabványügyi Testület
- MSZ 4803/36.lap-1969 Test the insulating varnish. Determination of dielectric constant and loss factor
- MSZ 15747/9-1982 Definition of relative dielectric constant and loss factor for testing of ceramic electric cutting equipment
Standard Association of Australia (SAA)
- AS 1767.2.2:2008 Test method for insulating liquids Measurement of relative permittivity, dielectric dissipation factor (tan d) and DC resistivity
- AS 1255.4:1974 Methods of test for electrical characteristics of solid plastics insulating materials - Determination of the permittivity and dielectric dissipation factor at power, audio and radio frequencies up to 300 MHz
International Telecommunication Union (ITU)
- ITU-T M.560-1976 Overall loss of a circuit
- ITU-T M.560-1980 Overall loss of a circuit
Kingdom of Bahrain Testing and Metrology Directorate
- BH GSO IEC 61620:2016 Insulating liquids - Determination of the dielectric dissipation factor by measurement of the conductance and capacitance - Test method
- BH GSO IEC 60349-3:2016 Electric traction - Rotating electrical machines for rail and road vehicles - Part 3: Determination of the total losses of converter-fed alternating current motors by summation of the component losses
- BH GSO IEC 60250:2016 Recommended methods for the determination of the permittivity and dielectric dissipation factor of electrical insulating materials at power, audio and radio frequencies including metre wavelengths
(U.S.) Telecommunications Industries Association
- TSB-141-2005 Polarization Dependent Loss: Measurement and Application Issues in Telecommunications
South African Bureau of Standard
- SANS 60034-2A:1974 Rotating electrical machines Part 2A: Methods for determining losses and efficiency of rotating electrical machinery from tests (excluding machines for traction vehicles) First supplement: Measurement of losses by the calorimetric method
Canadian Standards Association (CSA)
- CSA C802.3-01-2001 Pertes Maximales Pour Les Transformateurs De Puissance Premiere Edition; Mise A Jour No 1
- CAN/CSA-C802.3-2001(C2012) Maximum losses for power transformers
- CAN/CSA C802.3-2001(R2012) Maximum Losses for Power Transformers
- CAN/CSA-C802.3-2001(R2012) Maximum Losses for Power Transformers
COMMISSION FOR THE STANDARDS, METROLOGY AND QUALITY OF VIETNAM (STAMEQ)
- TCVN 6627-2A-2001 Rotating electrical machines.Part 2: Methods for determining losses and efficiency of rotating electrical machinery from tests (excluding machines for traction vehicles).Measurement of losses by the calorimetric method
CENELEC - European Committee for Electrotechnical Standardization
- HD 53.2 S1-1988 Rotating Electrical Machines Part 2: Methods for Determining Losses and Efficiency of Rotating Electrical Machinery from Tests (Excluding Machines for Traction Vehicles) First Supplement: Measurement of Losses by the Calorimetric Method
Dielectric dissipation factor measurement of stator winding insulation of rotating electrical machines,The dielectric loss of the motor,Dielectric losses in motors