Sign In |Help & Support
ALL SECTORS
  • ALL SECTORS
  • GB(National Standard)
  • CB(Shipping)
  • CECS(Engineering Construction)
  • CJ(Urban Construction)
  • CY(News and Publication)
  • DB(Provincial Standard)
  • DL(Electricity & Power)
  • DZ(Geology & Mineralogy)
  • FZ(Spinning & Textile)
  • GA(Public Security)
  • HB(Aviation)
  • HG(Chemical Industry)
  • HJ(Environmental Protection)
  • JB(Machinery)
  • JC(Building Materials)
  • JG(Building & Construction)
  • JJ(Metering)
  • JT(Highway & Transportation)
  • LY(Forestry)
  • MT(Coal)
  • NB(Energy)
  • NY(Agriculture)
  • QB(Light Industry)
  • QC(Automobile & Vehicle)
  • QJ(Aerospace)
  • SH(Petrochemical)
  • SJ(Electronics)
  • SL(Water Resources)
  • SN(Commodity Inspection)
  • SY(Oil & Gas)
  • TB(Railway & Train)
  • YB(Ferrous Metallurgy)
  • YC(Tobacco)
  • YD(Telecommunication)
  • YY(Medical Device)
Database: 365,228(8 Aug 2026)

The dielectric loss of the motor

The dielectric loss of the motor, Total:280 items.

The international standard classification for "The dielectric loss of the motor" includes: Insulation systems , Paper and plastics capacitors , Rotating machinery in general , Rubber , Paper and board , Electronic components in general , Insulating gases , Paper and board insulating materials , Electrical wires and cables , Other insulating materials , Insulating materials in general , Other standards related to electricity and magnetism , Electric traction equipment , Other standards related to rotating machinery , Motors .

The Chinese standard classification for "The dielectric loss of the motor" includes: Technical Management , Technical management , Technical management , Paper , Electric rotating machinery in general , Rubber products in general , Special electronic technology material , Basic standard and general method for synthetic rubber , Electrical insulating material and its products , Cable and its accessory , Electric traction equipment , Radio Measurement , Hydraulic and pneumatic device , Basic standards and general methods , Basic standards and general method .


Professional Standard - Electron

  • SJ/T 1147-1993 Test method for dielectric loss angle tangent and dielectric canstant of organic film for use in capacitors
  • SJ/T 11043-1996 Test method for high frequency dielectric losses and permittivity of electronic glass
  • SJ/Z 9181-1995 Specifications for determination of low-loss aluminum electrolytic capacitors used for VCR
  • SJ 20512-1995 Test methods for permittivity and permeability of microwave high loss solid materials

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

  • GB/T 34861-2017 Specific methods for determining separate losses of large machines from tests
  • GB/T 3048.11-2007 Test methods for electrical properties of electric cables and wires—Part 11:Test for dielectric dissipation factor
  • GB/T 11297.9-2015 Test method for dielectric tangent of loss angle of pyroelectric materials
  • GB/T 20833.3-2018 Rotating electrical machines—Stator winding insulation of rotating electrical machines—Part 3:Dielectric dissipation factor measurement
  • GB/T 34665-2017 Measurement method of dielectric dissipation factor of electric machinery coil/winding insulation
  • GB/T 31838.6-2021 Solid insulating materials—Dielectric and resistive properties—Part 6:Dielectric properties(AC method)—Relative permittivity and dielectric dissipation factor(frequencies 0.1Hz~10 MHz)
  • GB/T 25123.3-2011 Electric tracion—Rotating electrical machines for rail and road vehicles—Part 3:Determination of the total losses of convertor-fed alternating current motors by summation of the component losses
  • GB/T 1694-1981 Vulcanized rubber--Test method for HF dielectric constant and dielectric loss angular tangent value
  • GB/T 11297.9-1989 Test method for dielectric tangent of loss angle of pyroelectric material
  • GB/T 3334-1999 Method of test for dissipation factor ( tgδ)of cable paper at power frequence (Schering bridge method)
  • GB/T 1693-1981 Vulcanized rubber--Determination for industrial frequency dielectric constant and dielectricloss angular tangent value
  • GB/T 5654-2007 Insulating liquids - Measurement of relative permittivity dielectric dissipation factor(tanδ)and d.c. resistivity
  • GB/T 755.2-2003 Methods for determining losses and efficiency of rotating electrical machinery from tests(excluding machines for traction vehicles)
  • GB/T 14217-1993 Method of test for dielectric dissipation factor (tanδ) of capacitor paper at power frequence
  • GB/T 21216-2007 insulating liquids - Determination of the dielectric dissipation factor by measurement of the conductance and capacitance - Test method
  • GB/T 5321-2005 Measurement of loss and efficiency for electrical machine by the calorimetric method
  • GB/T 31838.8-2024 Solid insulating materials—Dielectric and resistive properties—Part 8:Determination of dielectric properties(AC method)—Relative permittivity and dielectric dissipation factor(frequencies 1 MHz~300 MHz)
  • GB/T 5654-1985 Measurement of relative permittivity,dielectric dissipation factor at power frequency and volume resistivity of insulating liquids
  • GB/T 25442-2018 Standard methods for determining losses and efficiency of rotation electricalmachines from tests(excluding machines for traction vehicles)
  • GB/T 25442-2010 Standard methods for determining losses and efficiency of rotating electrical machines from tests(excluding machines for traction vehicles)
  • GB/T 1693-2007 Rubber vulcanized—Determination of dielectric constant and dielectric loss tangent

National Metrological Technical Specifications of the People's Republic of China

  • JJF 1095-2002 Calibration Specification for Capacitor Dielectric Loss Meters
  • JJF 1618-2017 Calibration Specification for Insulating Oil Dielectric Dissipation Factor and Volume Resistivity Testers

Group Standards of the People's Republic of China

  • T/CSTM 00985-2023 Test method for the complex permittivity of low-loss dielectric plates-Split-cylinder resonator method
  • T/CSTM 00990-2023 Test method for dielectric constant and dielectric loss tangent in millimeter wave frequency range — Quasi-optical cavity method
  • T/CSEE 0032-2017 Relative dielectric loss factor and capacitance ratio live test method of capacitive equipment

Professional Standard - Machinery

  • JB/T 7608-2006 Methods and limits for testing the dissipation factor tan δon winding of high voltage AC machine
  • JB/T 7608-1994 Test method and limit value of dielectric loss tangent of high voltage AC motor coil

Professional Standard - Energy and Power Planning

  • DL/T 2603-2023 Energized testing methods for relative dielectric loss factor and capacitance ratio of capacitive equipment
  • DL/T 474.3-1992 Guide for Insulation Test on Site Dielectric Dissipation Factor Test
  • DL/T 1154-2012 Guide for Dielectric Dissipation Factor Test on Rating Voltage of High Voltage Electrical Equipment
  • DL/T 686-1999 Guide of calculator of grid energy loss

Professional Standard - Aerospace

  • QJ 1990.3-1990 Electrical performance test method of electrical insulating adhesives Dielectric loss angle at power frequency and high frequency

National Metrological Verification Regulations of the People's Republic of China

  • JJG(船舶) 03-1991 Verification Regulations for Strong Field Dielectric Loss Tester
  • JJG 1126-2016 Verification Regulation of High-voltage Dielectric Loss Factor Tester

State Grid Corporation of China

  • Q/GDW 1895-2013 Guidelines for field application of dielectric dissipation factor and capacitance live test technology for capacitive equipment

British Standards Institution (BSI)

  • BS EN 60034-27-3:2016 Rotating electrical machines. Dielectric dissipation factor measurement on stator winding insulation of rotating electrical machines
  • BS DD IEC/PAS 62562:2008 Cavity resonator method to measure the complex permittivity of low-loss dielectric plates
  • BS EN 62562:2011 Cavity resonator method to measure the complex permittivity of low-loss dielectric plates
  • 09/30174252 DC BS EN 62562. Cavity resonator method to measure the complex permittivity of low-loss dielectric plates
  • BS EN 60512-25-2:2002 Connectors for electronic equipment - Tests and measurements - Test 25b - Attenuation (insertion loss) - Section 2 Attenuation (insertion loss)
  • 13/30281457 DC BS EN 62810. Cylindrical cavity method to measure the complex permittivity of low-loss dielectric rods
  • PAS 62562-2008 Cavity resonator method to measure the complex permittivity of low-loss dielectric plates (Edition 1.0)
  • BS 5737:1979 Method for the measurement of relative permittivity, dielectric dissipation factor and d.c. resistivity of insulating liquids
  • BS IEC 61196-1-125:2022 Coaxial communication cable - Electrical test methods. Test for equivalent permittivity and equivalent dissipation factor of dielectric
  • BS EN 62810:2015 Cylindrical cavity method to measure the complex permittivity of low-loss dielectric rods
  • 21/30435996 DC BS IEC 61196-1-125. Coaxial communication cable. Part 1-125. Electrical test methods. Test for equivalent permittivity and equivalent dissipation loss of dielectric
  • 18/30373795 DC BS EN 63185. Balanced-type circular disk resonator method to measure the complex permittivity of low-loss dielectric substrates
  • BS EN IEC 63185:2021 Measurement of the complex permittivity for low-loss dielectric substrates balanced-type circular disk resonator method
  • 23/30461071 DC BS EN IEC 63185 Measurement of the complex permittivity for low-loss dielectric substrates balanced-type circular disk resonator method
  • BS EN IEC 63185:2025 Measurement of the complex permittivity for low-loss dielectric substrates balanced-type circular disk resonator method
  • BS EN 60247:2004 Insulating liquids - Measurement of relative permittivity, dielectric dissipation factor (tan ) and d.c. resistivity
  • BS EN IEC 62631-2-2:2022 Dielectric and resistive properties of solid insulating materials - Relative permittivity and dissipation factor. High frequencies (1 MHz to 300 MHz). AC methods
  • BS 4542:1970 Method for determination of loss tangent and permittivity of electrical insulating materials in sheet form (Lynch method)
  • BS 7663:1993(2000) Methods of test for Determination of permittivity and dissipation factor of electrical insulating material in sheet or tubular form
  • BS EN 61620:1999 Insulating liquids. Determination of the dielectric dissipation factor by measurement of the conductance and capacitance. Test method
  • 25/30442613 DC Draft BS EN 63405 High-voltage test techniques. Dielectric loss measurements PROPOSED HORIZONTAL STANDARD
  • 20/30425177 DC BS IEC 62631-2-2. Dielectric and resistive properties of solid insulating materials. Part 2-2. Relative permittivity and dielectric dissipation factor. High frequencies (1 MHz to 300 MHz). AC Methods
  • BS EN IEC 60034-2-3:2024 Rotating electrical machines - Specific test methods for determining losses and efficiency of converter-fed AC motors

RO-ASRO

  • STAS 2740-1969 Electrical insulation materials. Determination of dielectric constant and dielectric loss angle
  • STAS 6799-1981 INSULATING MINERAL OILS Determinations of the permittivity and of the dielectric loss tangent

Association for Electrical, Electronic & Information Technologies (VDE)

  • VDE 0472-505-1983 Testing of cables@ wires and flexible cords; loss factor@ dielectric loss coefficient and leakance [VDE Specification]
  • VDE 0380-2-1996*DIN IEC 60247:1996 Measurement of relative permittivity, dielectric dissipation factor and d.c. resistivity of insulating liquids
  • VDE 0380-2-2005 Insulating liquids - Measurement of relative permittivity@ dielectric dissipation factor (tan δ) and d.c. resistivity (IEC 60247:2004); German version EN 60247:2004
  • VDE 0307-2-2 E*DIN EN IEC 62631-2-2:2021-07 Dielectric and resistive properties of solid insulating materials — Part 2-2: Relative permittivity and dielectric dissipation factor — High frequencies (1 MHz to 300 MHz) — AC Methods

American Society for Testing and Materials (ASTM)

  • ASTM D1082-17 Standard Test Method for Dissipation Factor and Permittivity (Dielectric Constant) of Mica
  • ASTM D2149-13 Standard Test Method for Permittivity (Dielectric Constant) And Dissipation Factor Of Solid Ceramic Dielectrics At Frequencies To 10 MHz And Temperatures To 500&#176C
  • ASTM D1082-17(2024) Standard Test Method for Dissipation Factor and Permittivity (Dielectric Constant) of Mica
  • ASTM D150-87 Standard Test Methods for A-C Loss Characteristics and Permittivity (Dielectric Constant) of Solid Electrical Insulating Materials
  • ASTM D150-18 Standard Test Methods for AC Loss Characteristics and Permittivity (Dielectric Constant) of Solid Electrical Insulation
  • ASTM D150-98(2004) Standard Test Methods for AC Loss Characteristics and Permittivity (Dielectric Constant) of Solid Electrical Insulation
  • ASTM D150-98 Standard Test Methods for AC Loss Characteristics and Permittivity (Dielectric Constant) of Solid Electrical Insulation
  • ASTM D3380-14 Standard Test Method for Relative Permittivity (Dielectric Constant) and Dissipation Factor of Polymer-Based Microwave Circuit Substrates
  • ASTM RR-D27-1015 2003 D0924-Test Method for Dissipation Factor (or Power Factor) and Relative Permittivity (Dielectric Constant) of Electrical Insulating Liquids
  • ASTM D2149-97(2004) Standard Test Method for Permittivity (Dielectric Constant) And Dissipation Factor Of Solid Ceramic Dielectrics At Frequencies To 10 MHz And Temperatures To 500&176C
  • ASTM D2149-97 Standard Test Method for Permittivity (Dielectric Constant) And Dissipation Factor Of Solid Ceramic Dielectrics At Frequencies To 10 MHz And Temperatures To 500176C
  • ASTM D3380-22 Standard Test Method for Relative Permittivity (Dielectric Constant) and Dissipation Factor of Polymer-Based Microwave Circuit Substrates
  • ASTM D3380-90(1995)e1 Standard Test Method for Relative Permittivity (Dielectric Constant) and Dissipation Factor of Polymer-Based Microwave Circuit Substrates
  • ASTM D2149-13(2021) Standard Test Method for Permittivity (Dielectric Constant) and Dissipation Factor of Solid Dielectrics at Frequencies to 10 MHz and Temperatures to 500 °C
  • ASTM D150-11 Standard Test Methods for AC Loss Characteristics and Permittivity (Dielectric Constant) of Solid Electrical Insulation
  • ASTM D924-15 Standard Test Method for Dissipation Factor (or Power Factor) and Relative Permittivity (Dielectric Constant) of Electrical Insulating Liquids
  • ASTM D924-99e1 Standard Test Method for Dissipation Factor (or Power Factor) and Relative Permittivity (Dielectric Constant) of Electrical Insulating Liquids
  • ASTM D924-08 Standard Test Method for Dissipation Factor (or Power Factor) and Relative Permittivity (Dielectric Constant) of Electrical Insulating Liquids
  • ASTM D924-99e2 Standard Test Method for Dissipation Factor (or Power Factor) and Relative Permittivity (Dielectric Constant) of Electrical Insulating Liquids
  • ASTM D924-04 Standard Test Method for Dissipation Factor (or Power Factor) and Relative Permittivity (Dielectric Constant) of Electrical Insulating Liquids
  • ASTM D924-03a Standard Test Method for Dissipation Factor (or Power Factor) and Relative Permittivity (Dielectric Constant) of Electrical Insulating Liquids
  • ASTM D924-03 Standard Test Method for Dissipation Factor (or Power Factor) and Relative Permittivity (Dielectric Constant) of Electrical Insulating Liquids
  • ASTM D1673-94(2004) Standard Test Methods for Relative Permittivity And Dissipation Factor of Expanded Cellular Polymers Used For Electrical Insulation
  • ASTM D1673-94(1998) Standard Test Methods for Relative Permittivity And Dissipation Factor of Expanded Cellular Polymers Used For Electrical Insulation
  • ASTM D3380-10 Standard Test Method for Relative Permittivity (Dielectric Constant) and Dissipation Factor of Polymer-Based Microwave Circuit Substrates

Korean Agency for Technology and Standards (KATS)

  • KS C 2150-2008(2018) Measuring method of dielectric constant and dielectric loss of dielectric thin film at the high frequency ranges(500 MHz∼10 GHz)
  • KS C 2150-2008 Measuring method of dielectric constant and dielectric loss of dielectric thin film at the high frequency ranges(500 MHz∼10 GHz)
  • KS C 2150-2023 Measuring method of dielectric constant and dielectric loss of dielectric thin film at the high frequency ranges(500 MHz∼10 GHz)
  • KS C 2150-2008(2023) Measuring method of dielectric constant and dielectric loss of dielectric thin film at the high frequency ranges(500 MHz∼10 GHz)
  • KS C 2135-1996(2021) Testing methods for AC loss characteristics and permittivity(Dielectric constant) of solid electrical insulation
  • KS C 2135-2021 Testing methods for AC loss characteristics and permittivity(Dielectric constant) of solid electrical insulation
  • KS C IEC 60034-27-3-2019 Rotating electrical machines — Part 27-3: Dielectric dissipation factor measurement on stator winding insulation of rotating electrical machines
  • KS C IEC 60034-27-3:2019 Rotating electrical machines — Part 27-3: Dielectric dissipation factor measurement on stator winding insulation of rotating electrical machines
  • KS C IEC 60034-27-3-2024 Rotating electrical machines — Part 27-3: Dielectric dissipation factor measurement on stator winding insulation of rotating electrical machines
  • KS C IEC 60034-27-3-2019(2024) Rotating electrical machines — Part 27-3: Dielectric dissipation factor measurement on stator winding insulation of rotating electrical machines
  • KS C 2135-1996(2016) Testing methods for AC loss characteristics and permittivity(Dielectric constant) of solid electrical insulation
  • KS C IEC 60250-2020 Recommended methods for the determination of the permittivity and dielectric dissipation factor of electrical insulating materials at power, audio and radio frequencies including metre wavelengths
  • KS C IEC TS 60349-3:2021 Electric traction — Rotating electrical machines for rail and road vehicles — Part 3: Determination of the total losses of converter-fed alternating current motors by summation of the component losses
  • KS C IEC 60349-3-2005(2015) Electric traction-Rotating electrical machines for railand road vehicles-Part 3:Determination of the total lossesof convertor-fed alternating current motors by summationof the component losses
  • KS C IEC TS 60349-3-2021 Electric traction — Rotating electrical machines for rail and road vehicles — Part 3: Determination of the total losses of converter-fed alternating current motors by summation of the component losses
  • KS C IEC 62631-2-1-2020 Dielectric and resistive properties of solid insulating materials —Part 2-1: Relative permittivity and dissipation factor —Technical frequencies(0.1 Hz ~ 10 MHz) — AC methods
  • KS C IEC 62631-2-1:2020 Dielectric and resistive properties of solid insulating materials —Part 2-1: Relative permittivity and dissipation factor —Technical frequencies(0.1 Hz ~ 10 MHz) — AC methods
  • KS C 2134-1996(2016) Testing method for dissipation factor and permittivity parallel with laminations of laminated sheet and plate materials
  • KS C IEC 60250:2003 Recommended methodRecommended methods for the determination of the permittivity and dielectric dissipation factor of electrical insulating materials at power, audio and radio frequencies including metre wavelengthss for the determination of the permittivi

IPC - Association Connecting Electronics Industries

  • IPC TM-650 2.5.5.3C-1987 Permittivity (Dielectric Constant) and Loss Tangent (Dissipation Factor) of Materials (Two Fluid Cell Method)
  • IPC TM-650 2.5.5.5C-1998 Stripline Test for Permittivity and Loss Tangent (Dielectric Constant and Dissipation Factor) at X-Band
  • IPC TM-650 2.5.5.5B-1995 Stripline Test for Permittivity and Loss Tangent (Dielectric Constant and Dissipation Factor) at X-Band
  • IPC TM-650 2.5.5.1B-1986 Permittivity (Dielectric Constant) and Loss Tangent (Dissipation Factor) of Insulating Material at 1 MHz (Contacting Electrode Systems)

Spanish Association for Standardization (UNE)

  • UNE-EN 62562:2011 Cavity resonator method to measure the complex permittivity of low-loss dielectric plates (Endorsed by AENOR in June of 2011.)
  • UNE-EN 62810:2015 Cylindrical cavity method to measure the complex permittivity of low-loss dielectric rods (Endorsed by AENOR in July of 2015.)
  • UNE-EN 60034-27-3:2016 Rotating electrical machines - Part 27-3: Dielectric dissipation factor measurement on stator winding insulation of rotating electrical machines (Endorsed by AENOR in August of 2016.)
  • UNE-EN 60247:2004 ERRATUM:2005 Insulating liquids - Measurement of relative permittivity, dielectric dissipation factor (tan d) and d.c. resistivity
  • UNE-EN 60247:2004 Insulating liquids - Measurement of relative permittivity, dielectric dissipation factor (tan d) and d.c. resistivity
  • UNE-EN IEC 63185:2021 Measurement of the complex permittivity for low-loss dielectric substrates balanced-type circular disk resonator method

German Institute for Standardization

  • DIN 57472-505:1983-04 Testing of cables, wires and flexible cords; loss factor, dielectric loss coefficient and leakance [VDE Specification]
  • DIN VDE 0472-505:1983-04 Testing of cables, wires and flexible cords; loss factor, dielectric loss coefficient and leakance [VDE Specification]
  • DIN 57472-505:1983 Testing of cables, wires and flexible cords; loss factor, dielectric loss coefficient and leakance [VDE Specification]
  • DIN EN 62810:2015-12 Cylindrical cavity method to measure the complex permittivity of low-loss dielectric rods (IEC 62810:2015); German version EN 62810:2015
  • DIN EN 62562:2011-10 Cavity resonator method to measure the complex permittivity of low-loss dielectric plates (IEC 62562:2010); German version EN 62562:2011
  • DIN EN IEC 63185:2022 Measurement of the complex dielectric constant for low-loss dielectric substrates using the symmetrical circular disk resonator method
  • DIN IEC/TS 60034-27-3:2012 Rotating electrical machines - Part 27-3: Dielectric dissipation factor measurement on stator winding insulation of rotating electrical machines (IEC 2/1651/CD:2011)
  • DIN EN 60034-27-3:2016 Rotating electrical machines - Part 27-3: Dielectric dissipation factor measurement on stator winding insulation of rotating electrical machines (IEC 60034-27-3:2015); German version EN 60034-27-3:2016
  • DIN EN 62562 E:2009-08 Draft Document - Cavity resonator method to measure the complex permittivity of low-loss dielectric plates (IEC 46F/118/CDV:2009); German version FprEN 62562:2009
  • DIN EN 62562 E:2009 Draft Document - Cavity resonator method to measure the complex permittivity of low-loss dielectric plates (IEC 46F/118/CDV:2009); German version FprEN 62562:2009
  • DIN IEC /TS 60034-27-3 E:2012 Draft Document - Rotating electrical machines - Part 27-3: Dielectric dissipation factor measurement on stator winding insulation of rotating electrical machines (IEC 2/1651/CD:2011)
  • DIN EN 62810 E:2013-08 Cylindrical cavity method to measure the complex permittivity of low-loss dielectric rods
  • DIN EN 62810 E:2013 Draft Document - Cylindrical cavity method to measure the complex permittivity of low-loss dielectric rods (IEC 46F/228/CD:2013)
  • DIN IEC /TS 60034-27-3 E:2012-04 Draft Document - Rotating electrical machines - Part 27-3: Dielectric dissipation factor measurement on stator winding insulation of rotating electrical machines (IEC 2/1651/CD:2011)
  • DIN EN 60247:2005 Insulating liquids - Measurement of relative permittivity, dielectric dissipation factor (tan ) and d.c. resistivity (IEC 60247:2004); German version EN 60247:2004
  • DIN 51111:2024-02 Electrical properties of fresh and used oils from electric drives in vehicles - Measurement of the specific electrical conductivity, the relative permittivity (<epsilon><(Index)r>) and the dielectric dissipation factor (tan <delta>)
  • DIN 51111 E:2023-04 Draft Document - Electrical properties of fresh and used oils from electric drives in vehicles - Measurement of the specific electrical conductivity, the relative permittivity (?<(Index)r>) and the dielectric dissipation factor (tan ?)
  • DIN EN IEC 63185:2022-10 Measurement of the complex permittivity for low-loss dielectric substrates balanced-type circular disk resonator method (IEC 63185:2020); German version EN IEC 63185:2021
  • DIN EN 63185:2018-09 Draft Document - Balanced-type circular disk resonator method to measure the complex permittivity of low-loss dielectric substrates (IEC 46F/415/CD:2018); Text in German and English
  • DIN 51111:2024 Electrical properties of fresh and used oils from electric drives in vehicles - Measurement of the specific electrical conductivity, the relative permittivity (?<(Index)r>) and the dielectric dissipation factor (tan ?)
  • DIN 51111 E:2023 Draft Document - Electrical properties of fresh and used oils from electric drives in vehicles - Measurement of the specific electrical conductivity, the relative permittivity (?<(Index)r>) and the dielectric dissipation factor (tan ?)
  • DIN EN 63185:2018 Balanced-type circular disk resonator method to measure the complex permittivity of low-loss dielectric substrates (IEC 46F/415/CD:2018); Text in German and English
  • DIN EN 61620:1999 Insulating liquids - Determination of the dielectric dissipation factor by measurement of the conductance and capacitance - Test method (IEC 61620:1998); German version EN 61620:1999
  • DIN EN 60247:2005-01 Insulating liquids - Measurement of relative permittivity, dielectric dissipation factor (tan ) and dc resistivity (IEC 60247:2004); German version EN 60247:2004
  • DIN EN 63185 E:2018 Draft Document - Balanced-type circular disk resonator method to measure the complex permittivity of low-loss dielectric substrates (IEC 46F/415/CD:2018); Text in German and English
  • DIN EN IEC 62631-2-3 E:2024-08 Draft Document - Dielectric and resistive properties of solid insulating materials - Part 2-3: Determination of relative permittivity and dielectric dissipation factor (AC methods) - Contact electrode method for insulating films (IEC 112/603/CDV:2023);...

GOST

  • GOST R 71338-2024 Electro-optical elements. Methods for measuring the tangent of dielectric loss angle
  • GOST R 71602-2024 Inorganic dielectrics. Method for determining the dielectric constant and the tangent of the dielectric loss angle at a frequency of 1 MHz
  • GOST R 71601-2024 Inorganic dielectrics. Method for determining the relative permittivity and the tangent of the dielectric loss angle in the frequency range from 2.5 to 3.5 GHz
  • GOST R 71432-2024 Microwave ferrite devices and products made of them. Methods for measuring the complex relative permittivity and the tangent of the dielectric loss angle

PL-PKN

  • PN E04403-1986 Solide electric insulating materials Measurements of the permittivity and dielectric dissipation factor
  • PN E04410-22-1986 Electroinsulating varnishes Test methods Testing of dissipation factor and permittivity
  • PN-EN IEC 63185-2021-08 E Measurement of the complex permittivity for low-loss dielectric substrates balanced-type circular disk resonator method (IEC 63185:2020)

CZ-CSN

  • CSN 72 5041-1973 Testing oí fired ceramic materials. Determination of the permitivity and dielectric dissipation factor
  • CSN 34 6466-1983 Methods of test for the determination of the permittivity and dielectric dissipation factor of electrical insulating materials
  • CSN 34 6317-1984 Testing of ceramic electrotechnic materials.Method of the determination of the permitivity and dielectric dissipation factor
  • CSN 34 7010 Cast.41-1986 Dissipation factor measurement ot power cables

European Committee for Electrotechnical Standardization(CENELEC)

  • EN 62810:2015 Cylindrical cavity method to measure the complex permittivity of low-loss dielectric rods
  • EN 60034-27-3:2016 Rotating electrical machines - Part 27-3: Dielectric dissipation factor measurement on stator winding insulation of rotating electrical machines
  • EN 62562:2011 Cavity resonator method to measure the complex permittivity of low-loss dielectric plates
  • EN IEC 63185:2021 Measurement of the complex permittivity for low-loss dielectric substrates balanced-type circular disk resonator method
  • EN 61620:1999 Insulating liquids Determination of the dielectric dissipation factor by measurement of the conductance and capacitance Test method
  • EN 60247:2004 Insulating liquids Measurement of relative permittivity, dielectric dissipation factor (tan $) and d.c. resistivity

Japanese Industrial Standards Committee (JISC)

  • JIS C 2138:2007 Electrical insulating materials -- Methods for the determination of the relative permittivity and dielectric dissipation factor

Association Francaise de Normalisation

  • NF C26-232*NF EN 62810:2018 Cylindrical cavity method to measure the complex permittivity of low-loss dielectric rods
  • NF EN 62810:2018 Measurement of the complex permitivity of low-loss dielectric rods using the cylindrical cavity method
  • NF C26-296*NF EN 62562:2011 Cavity resonator method to measure the complex permittivity of low-loss dielectric plates.
  • NF EN 62562:2011 Resonant cavity method for measuring the complex permittivity of low-loss dielectric plates
  • NF C51-127-3*NF EN 60034-27-3:2016 Rotating electrical machines - Part 27-3 : dielectric dissipation factor measurement on stator winding insulation of rotating electrical machines
  • NF EN 60247:2004 Insulating liquids - Measurement of relative permittivity, dielectric dissipation factor (tan delta) and DC resistivity
  • NF C27-210:1979 Measurement of relative permittivity dielectric dissipation factor and D.C. Resistivity of insulating liquids.
  • NF EN IEC 63185:2021 Symmetric-type circular disk resonator method for measuring the complex permittivity of low-loss dielectric substrates
  • NF C27-210*NF EN 60247:2004 Insulating liquids - Measurement of relative permittivity, dielectric dissipation factor (tan delta) and d.c.resistivity
  • NF EN 61620:1999 Liquid insulators - Determination of dielectric dissipation factor by measuring conductance and capacitance - Test method
  • NF EN IEC 62631-2-2:2022 Dielectric and resistive properties of solid insulating materials - Part 2-2: Relative permittivity and dissipation factor - High frequencies (1 MHz to 300 MHz) - Alternating current methods
  • NF EN IEC 62631-2-3:2024 Dielectric and resistive properties of solid insulating materials - Part 2-3 : relative permittivity and dissipation factor - Contact electrode method for insulating films - AC methods
  • NF C26-631-2-3*NF EN IEC 62631-2-3:2024 Dielectric and resistive properties of solid insulating materials - Part 2-3 : relative permittivity and dissipation factor - Contact electrode method for insulating films - AC methods
  • NF C51-112:1975 Rotating electrical machines methods for determining losses and efficiency of rotating electrical machinery from tests.

International Electrotechnical Commission (IEC)

  • IEC PAS 62562:2008 Cavity resonator method to measure the complex permittivity of low-loss dielectric plates
  • IEC 60034-27-3:2015 Rotating electrical machines - Part 27-3: Dielectric dissipation factor measurement on stator winding insulation of rotating electrical machines
  • IEC 62810:2015 Cylindrical cavity method to measure the complex permittivity of low-loss dielectric rods
  • IEC 63185:2025 PRV Measurement of the complex permittivity for low-loss dielectric substrates balanced-type circular disk resonator method
  • IEC 63185:2025 Measurement of the complex permittivity for low-loss dielectric substrates balanced-type circular disk resonator method
  • IEC 60247:1978 Measurement of relative permittivity, dielectric dissipation factor and d.c. resistivity of insulating liquids
  • IEC 63185:2025 RLV Measurement of the complex permittivity for low-loss dielectric substrates balanced-type circular disk resonator method
  • IEC 63185:2020 Measurement of the complex permittivity for low-loss dielectric substrates balanced-type circular disk resonator method
  • IEC 61620:1998 Insulating liquids - Determination of dielectric dissipation factor by measurement of the conductance and capacitance - Test method
  • IEC 2/1651/CD:2011 IEC/TS 60034-27-3, Ed. 1: Rotating electrical machines - Part 27-3: Dielectric dissipation factor measurement on stator winding insulation of rotating electrical machines
  • IEC 60247:2004 Insulating liquids - Measurement of relative permittivity, dielectric dissipation factor (tan ) and d.c. resistivity
  • IEC TS 60349-3:1995 Electric traction - Rotating electrical machines for rail and road vehicles - Part 3: Determination of the total losses of convertor-fed alternating current motors by summation of the component losses
  • IEC 9/1135/CD:2008 Electric traction - Rotating electrical machines for rail and road vehicles - Part 3: Determination of the total losses of converter-fed alternating current motors by summation of the component losses
  • IEC TR2 60349-3:1995 Electric traction - Rotating electrical machines for rail and road vehicles - Part 3: Determination of the total losses of convertor-fed alternating current motors by summation of the component losses
  • IEC TS 60349-3:2010 Electric traction - Rotating electrical machines for rail and road vehicles - Part 3: Determination of the total losses of converter-fed alternating current motors by summation of the component losses
  • IEC 62631-2-2:2022 Dielectric and resistive properties of solid insulating materials - Part 2-2: Relative permittivity and dissipation factor - High frequencies (1 MHz to 300 MHz) - AC methods
  • IEC 62631-2-3:2024 Dielectric and resistive properties of solid insulating materials - Part 2-3: Relative permittivity and dissipation factor - Contact electrode method for insulating films - AC methods
  • IEC 60034-2A:1974 Rotating electrical machines Part 2: Methods for determining losses and efficiency of rotating electrical machinery from tests (excluding machines for traction vehicles) Measurement of losses by the calorimetric method (Edition 1.0; First Supplment to pub
  • IEC 60996:1989 Method for verifying accuracy of tan delta measurements applicable to capacitors

Danish Standards Foundation

  • DS/EN 62562:2011 Cavity resonator method to measure the complex permittivity of low-loss dielectric plates
  • DANSK DS/EN 60034-27-3:2016 Rotating electrical machines – Part 27-3: Dielectric dissipation factor measurement on stator winding insulation of rotating electrical machines
  • DANSK DS/EN 62810:2015 Cylindrical cavity method to measure the complex permittivity of low-loss dielectric rods
  • DANSK DS/EN 62562:2011 Cavity resonator method to measure the complex permittivity of low-loss dielectric plates
  • DANSK DS/EN 60247:2004 Insulating liquids - Measurement of relative permittivity, dielectric dissipation factor (tan phi) and d.c. resistivity
  • DS/EN 60247:2004 Insulating liquids - Measurement of relative permittivity, dielectric dissipation factor (tan phi) and d.c. resistivity
  • DANSK DS/EN IEC 63185:2021 Measurement of the complex permittivity for low-loss dielectric substrates balanced-type circular disk resonator method
  • DS/EN IEC 63185:2021 Measurement of the complex permittivity for low-loss dielectric substrates balanced-type circular disk resonator method
  • DANSK DS/IEC 61196-1-125 ED1:2022 Coaxial communication cable – Part 1-125: Electrical test methods – Test for equivalent permittivity and equivalent dissipation factor of dielectric
  • DS/EN 61620:1999 Insulating liquids - Determination of the dielectric dissipation factor by measurement of the conductance and capacitance - Test method
  • DANSK DS/EN 61620:1999 Insulating liquids - Determination of the dielectric dissipation factor by measurement of the conductance and capacitance - Test method

The Directorate General of Specifications and Metrology (DGSM)

  • OS GSO IEC 62810:2017 Cylindrical cavity method to measure the complex permittivity of low-loss dielectric rods
  • OS GSO IEC 62562:2013 Cavity resonator method to measure the complex permittivity of low-loss dielectric plates
  • OS GSO IEC 60247:2015 Insulating liquids - Measurement of relative permittivity, dielectric dissipation factor (tan d) and d.c. resistivity
  • OS GSO IEC 61620:2015 Insulating liquids - Determination of the dielectric dissipation factor by measurement of the conductance and capacitance - Test method
  • OS GSO IEC 60250:2015 Recommended methods for the determination of the permittivity and dielectric dissipation factor of electrical insulating materials at power, audio and radio frequencies including metre wavelengths

GCC Standardization Organization

  • GSO IEC 62810:2017 Cylindrical cavity method to measure the complex permittivity of low-loss dielectric rods
  • GSO IEC 60247:2015 Insulating liquids - Measurement of relative permittivity, dielectric dissipation factor (tan d) and d.c. resistivity
  • GSO IEC 60250:2015 Recommended methods for the determination of the permittivity and dielectric dissipation factor of electrical insulating materials at power, audio and radio frequencies including metre wavelengths
  • GSO IEC 61620:2015 Insulating liquids - Determination of the dielectric dissipation factor by measurement of the conductance and capacitance - Test method
  • GSO IEC TS 60349-3:2014 Electric traction - Rotating electrical machines for rail and road vehicles - Part 3: Determination of the total losses of converter-fed alternating current motors by summation of the component losses

Swedish Institute for Standards

  • SS-EN 62810:2016 Cylindrical cavity method to measure the complex permittivity of low-loss dielectric rods
  • SS-EN 60247:2004 Insulating liquids - Measurement of relative permittivity, dielectric dissipation factor and d.c. resistivity
  • SS-EN 62562:2011 Cavity resonator method to measure the complex permittivity of low-loss dielectric plates
  • SS-EN 61620:1999 Insulating liquids - Determination of the dielectric dissipation factor by measurement of the conductance and capacitance - Test method
  • SS-EN IEC 62631-2-2:2022 Dielectric and resistive properties of solid insulating materials - Part 2-2: Relative permittivity and dissipation factor - High frequencies (1 MHz to 300 MHz) - AC methods

Comitato Elettrotecnico Italiano

  • CEI EN 62810:2015 Cylindrical cavity method to measure the complex permittivity of low-loss dielectric rods
  • CEI EN 62562:2011 Cavity resonator method to measure the complex permittivity of low-loss dielectric plates
  • CEI EN 60034-27-3:2016 Rotating electrical machines Part 27-3: Dielectric dissipation factor measurement on stator winding insulation of rotating electrical machines
  • CEI EN 60247:2004 Insulating liquids - Measurement of relative permittivity, dielectric dissipation factor (tan δ) and d.c. resistivity
  • CEI EN IEC 63185:2021 Measurement of the complex permittivity for low-loss dielectric substrates balanced-type circular disk resonator method
  • CEI EN 61620:1999 Insulating liquids - Determination of the dielectric dissipation factor by measurement of the conductance and capacitance - Test method

Gosstandart of Russia

  • GOST 22372-1977 Dielectric materials. Methods of determination of permittivity and powerfactor with in a frequency range of 100 to 5·10 in 6 degree Hz
  • GOST 26127-1984 Electrical insulating paper. Method for determination of the dielectric loss tangent at 50 Hz frequency
  • GOST 8.358-1979 State system for ensuring the uniformity of measurements. Method of making measurements of relative permittivity and dielectric loss tangent in the fregnency range of 0,2 to 1 GHz
  • GOST R IEC 61620-2013 Insulating liquids. Determination of dielectric dissipation factor by measurement of the conductance and capacitance
  • GOST IEC 60034-2A-2012 Rotating electrical machines. Part 2. Methods for determining losses and efficiency of rotating electrical machinery from tests (excluding machines for fraction vehicles). Measurement of losses by the calorimetric method
  • GOST R IEC 60247-2013 Insulating liquids. Measurement of relative permittivity, dielectric dissipation factor (tan d) and d.c. resistivity
  • GOST 25941-1983 Rotating electrical machines. Methods for determining losses and efficiency
  • GOST R 8.623-2015 State system for ensuring the uniformity of measurements. Relative dielectric permittivity and the loss tangent of solid dielectrics. Procedure of measurements at microwave frequencies
  • GOST 25495-1982 Rocks. Method for the determination of permittivity and dielektric loss tangent
  • GOST R IEC 62562-2012 State system for ensuring the uniformity of measurements. Cavity resonator method to measure the complex permittivity of low-loss dielectric plates

Ente Nazionale Italiano di Unificazione

  • UNI 4289:1972 Tests on plastics. Determination of permittivity and dielectric dissipation factor.

American National Standards Institute (ANSI)

  • ANSI/ASTM D150:2018 Standard Test Methods for AC Loss Characteristics and Permittivity (Dielectric Constant) of Solid Electrical Insulation
  • ANSI/ASTM D150:2011 Test Methods for AC Loss Characteristics and Permittivity Dielectric Constant of Solid Electrical Insulation
  • ANSI/ASA S12.8-1998 Methods for Determining the Insertion Loss of Outdoor Noise Barriers

Bureau of Indian Standards

  • IS 16840-2018 Insulating Liquids —— Measurement of Relative Permittivity, Dielectric Dissipation Factor (Tan ï¤) and d.c. Resistivity
  • IS 16086-2013 Insulating Liquids - Determination of the Dielectric Dissipation Factor by Measurement of the Conductance and Capacitance - Test Method

Lithuanian Standards Office

  • LST EN 62562-2011 Cavity resonator method to measure the complex permittivity of low-loss dielectric plates (IEC 62562:2010)
  • LST EN IEC 63185:2021 Measurement of the complex permittivity for low-loss dielectric substrates balanced-type circular disk resonator method (IEC 63185:2020)
  • LST EN 60247-2004 Insulating liquids. Measurement of relative permittivity, dielectric dissipation factor (tan ) and d.c. resistivity (IEC 60247:2004)
  • LST EN 61620-2001 Insulating liquids. Determination of the dielectric dissipation factor by measurement of the conductance and capacitance. Test method (IEC 61620:1998)

Institute of Interconnecting and Packaging Electronic Circuits (IPC)

  • IPC TM-650 2.5.5.4-1985 Dielectric Constant and Dissipation Factor of Printed Wiring Board Material-Micrometer Method
  • IPC TM-650 2.5.5.2-1987 Dielectric Constant and Dissipation Factor of Printed Wiring Board Material - Clip Method
  • IPC TM-650.2.5.7.2-2009 Permittivity (Dielectric Constant) and Loss Tangent (Dissipation Factor) of Materials (Two Fluid Cell Method); Revision C - December 1987
  • IPC TM-650-2015 Permittivity (Dielectric Constant) and Loss Tangent (Dissipation Factor) of Materials (Two Fluid Cell Method); Revision C - December 1987
  • IPC TM-650 2.5.5.5-1998 Stripline Test for Permittivity and Loss Tangent (Dielectric Constant and Dissipation Factor) at X-Band Revision C
  • IPC TM-650 2.5.5.3-1987 Permittivity (Dielectric Constant) and Loss Tangent (Dissipation Factor) of Materials (Two Fluid Cell Method); Revision C - December 1987
  • IPC TM-650 2.5.5.9-1998 Permittivity and Loss Tangent, Parallel Plate, 1 MHz to 1.5 GHz
  • IPC TM-650 2.5.5.1-1986 Permittivity (Dielectric Constant) and Loss Tangent (Dissipation Factor) of Insulating Material at 1 MHz (Contacting Electrode Systems); Revision B - May 1986

SE-SIS

Magyar Szabványügyi Testület

  • MSZ 4803/36.lap-1969 Test the insulating varnish. Determination of dielectric constant and loss factor
  • MSZ 15747/9-1982 Definition of relative dielectric constant and loss factor for testing of ceramic electric cutting equipment

Standard Association of Australia (SAA)

  • AS 1767.2.2:2008 Test method for insulating liquids Measurement of relative permittivity, dielectric dissipation factor (tan d) and DC resistivity
  • AS 1255.4:1974 Methods of test for electrical characteristics of solid plastics insulating materials - Determination of the permittivity and dielectric dissipation factor at power, audio and radio frequencies up to 300 MHz

International Telecommunication Union (ITU)

Kingdom of Bahrain Testing and Metrology Directorate

  • BH GSO IEC 61620:2016 Insulating liquids - Determination of the dielectric dissipation factor by measurement of the conductance and capacitance - Test method
  • BH GSO IEC 60349-3:2016 Electric traction - Rotating electrical machines for rail and road vehicles - Part 3: Determination of the total losses of converter-fed alternating current motors by summation of the component losses
  • BH GSO IEC 60250:2016 Recommended methods for the determination of the permittivity and dielectric dissipation factor of electrical insulating materials at power, audio and radio frequencies including metre wavelengths

South African Bureau of Standard

  • SANS 60034-2A:1974 Rotating electrical machines Part 2A: Methods for determining losses and efficiency of rotating electrical machinery from tests (excluding machines for traction vehicles) First supplement: Measurement of losses by the calorimetric method

Canadian Standards Association (CSA)

CENELEC - European Committee for Electrotechnical Standardization

  • HD 53.2 S1-1988 Rotating Electrical Machines Part 2: Methods for Determining Losses and Efficiency of Rotating Electrical Machinery from Tests (Excluding Machines for Traction Vehicles) First Supplement: Measurement of Losses by the Calorimetric Method

European Committee for Standardization (CEN)

  • HD 53.2 S1-1982 Rotating electrical machines; part 2: methods for determining losses and efficiency of rotating electrical machinery from tests (excluding machines for traction vehicules); first supplement: measurement of losses by the calorimetric method

AT-OVE/ON

  • OVE EN IEC 62631-2-2:2021 Dielectric and resistive properties of solid insulating materials - Part 2-2: Relative permittivity and dielectric dissipation factor - High frequencies (1 MHz to 300 MHz) - AC Methods (IEC 112/531/CDV) (english version)

ZA-SANS

  • NRS 080-2004 Quantifying and reporting of energy losses in electricity distribution networks