Standard transmittance

Standard transmittance, Total:155 items.

The international standard classification for "Standard transmittance" includes: Films and sheets , Packaging and distribution of goods in general , Glass , Coated fabrics , Advanced ceramics , Optics and optical measurements .

The Chinese standard classification for "Standard transmittance" includes: Basic standards and general methods for synthetic resin and plastic , Packaging method , Papermaking in general , Material and component for instrument and meter , Rubber products in general , Special ceramics .

Professional Standard - Military and Civilian Products

WJ/T 742-2014 Test method for transmittance of glue used in optical instruments
WJ 742-1994 Test method for transmittance of glue used in optical instruments

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 22921-2008 Paper and board—Determination of water vapour transmission rate of sheet materials—Dynamic sweep and static gas methods
GB/T 7962.12-1987 Colourless optical glass test methods; Spectral internal transmittance
GB/T 12585-2001 Rubber,vulcanized of thermoplastic--Rubber sheet and rubber-coated fabric--Determination rate of volatile liquids (gravimetic technique)
GB/T 5433-1985 The transmittance of daily use glass--Test method
GB/T 26253-2010 Determination of water vapour transmission rate for plastics-film and sheeting—Infrared detection sensor method
GB/T 21529-2008 Determination of water vapour transmission rate for plastic film and sheeting - Electrolytic detection sensor method
GB/T 30412-2013 Determination of Water Vapour Transmission Rate for Plastic Film and Sheeting - Humidity Detection Sensor Method

Group Standards of the People's Republic of China

T/QGCML 4000-2024 Low infrared transmittance infrared cut filter
T/SZMS 0007-2024 Calibration Specification for Solar Transmittance Tester

Professional Standard - Building Materials

JC/T 2020-2010 Test method for transmittance of translucent fine ceramics

Professional Standard - Machinery

JB/T 9495.3-1999 Measuring method for transmittance of optical crystal
JB/T 9395.3-1999 Measuring method for transmittance of optical crystal

National Metrological Technical Specifications of the People's Republic of China

JJF 2174-2024 Calibration Specification for Low Transmittance Simulators of Polarimeters and Polarimetric Saccharimeters Calibration
JJF 2181-2024 Calibration Specification for Oxygen Transmission Rate Testers of Plastic Film and Sheeting

GCC Standardization Organization

GSO ASTM D1003:2014 Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics
GSO ASTM G24:2023 Standard Practice for Conducting Exposures to Daylight Filtered Through Glass

American National Standards Institute （ANSI)

NAGDM 105-1998 American National Standard - Test Method for Thermal Transmittance and Air Infiltration of Garage Doors

The Directorate General of Specifications and Metrology (DGSM)

OS GSO ASTM E96:2010 Standard Test Methods for Water Vapor Transmission of Materials
OS GSO ASTM D1003:2014 Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics

American Society for Testing and Materials (ASTM)

ASTM RR-C16-1040 2012 E0096-Standard Test Methods for Water Vapor Transmission of Materials
ASTM RR-C16-1045 2016 E0096-Standard Test Methods for Water Vapor Transmission of Materials
ASTM E96/E96M-24 Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials
ASTM E96/E96M-23 Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials
ASTM D5886-95(2011) Standard Guide for Selection of Test Methods to Determine Rate of Fluid Permeation Through Geomembranes for Specific Applications
ASTM E96/E96M-21 Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials
ASTM E96/E96M-22ae1 Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials
ASTM E96/E96M-16 Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials
ASTM RR-F02-1007 1990 D3985-Standard Test Method for Oxygen Gas Transmission Rate Through Plastic Film and Sheeting Using a Coulometric Sensor
ASTM E96/E96M-22 Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials
ASTM E96/E96M-22a Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials
ASTM D6701-21 Standard Test Method for Determining Water Vapor Transmission Rates Through Nonwoven and Plastic Barriers
ASTM D6701-16 Standard Test Method for Determining Water Vapor Transmission Rates Through Nonwoven and Plastic Barriers
ASTM D5886-95(2001) Standard Guide for Selection of Test Methods to Determine Rate of Fluid Permeation Through Geomembranes for Specific Applications
ASTM D5886-95 Standard Guide for Selection of Test Methods to Determine Rate of Fluid Permeation Through Geomembranes for Specific Applications
ASTM E96/E96M-2023 Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials
ASTM E96/E96M-24a Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials
ASTM D1618-18 Standard Test Method for Carbon Black Extractables—Transmittance of Toluene Extract
ASTM D5886-95(2006) Standard Guide for Selection of Test Methods to Determine Rate of Fluid Permeation Through Geomembranes for Specific Applications
ASTM C1701/C1701M-09 Standard Test Method for Infiltration Rate of In Place Pervious Concrete
ASTM D1618-99(2004) Standard Test Method for Carbon Black Extractables—Transmittance of Toluene Extract
ASTM C1701/C1701M-17a Standard Test Method for Infiltration Rate of In Place Pervious Concrete
ASTM C1701/C1701M-17 Standard Test Method for Infiltration Rate of In Place Pervious Concrete
ASTM D1251-94 Standard test method for water vapor transmission rate of packaging materials by the cycle method
ASTM D6701-24 Standard Test Method for Determining Water Vapor Transmission Rates Through Nonwoven and Plastic Barriers
ASTM F1316-90(2008) Standard Test Method for Measuring the Transmissivity of Transparent Parts
ASTM F1316-18 Standard Test Method for Measuring the Transmissivity of Transparent Parts
ASTM D7709-11e1 Standard Test Methods for Measuring Water Vapor Transmission Rate (WVTR) of Pharmaceutical Bottles and Blisters
ASTM D7709-12 Standard Test Methods for Measuring Water Vapor Transmission Rate (WVTR) of Pharmaceutical Bottles and Blisters
ASTM F1316-90(2013) Standard Test Method for Measuring the Transmissivity of Transparent Parts
ASTM F1316-18(2023) Standard Test Method for Measuring the Transmissivity of Transparent Parts
ASTM F1316-90(2002) Standard Test Method for Measuring the Transmissivity of Transparent Parts
ASTM C119-02b Standard Terminology Relating to Dimension Stone
ASTM C1199-09 Standard Test Method for Measuring the Steady-State Thermal Transmittance of Fenestration Systems Using Hot Box Methods
ASTM C119-07 Standard Terminology Relating to Dimension Stone
ASTM C119-08 Standard Terminology Relating to Dimension Stone
ASTM C119-08e1 Standard Terminology Relating to Dimension Stone
ASTM C11-08b Standard Terminology Relating to Gypsum and Related Building Materials and Systems
ASTM D1003-11e1 Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics
ASTM F1316-90(1996) Standard Test Method for Measuring the Transmissivity of Transparent Parts
ASTM C1199-00(2008) Standard Test Method for Measuring the Steady-State Thermal Transmittance of Fenestration Systems Using Hot Box Methods
ASTM C11-03a Standard Terminology Relating to Gypsum and Related Building Materials and Systems
ASTM C119-02c Standard Terminology Relating to Dimension Stone
ASTM C11-08c Standard Terminology Relating to Gypsum and Related Building Materials and Systems
ASTM C119-22 Standard Terminology Relating to Dimension Stone
ASTM D7709-12(2023) Standard Test Methods for Measuring Water Vapor Transmission Rate (WVTR) of Pharmaceutical Bottles and Blisters
ASTM RR-F02-1012 1999 F1927-Test Method for Determination of Oxygen Gas Transmission Rate, Permeability and Permeance at Controlled Relative Humidity Through Barrier Materials Using a Coulometric Detector
ASTM C1199-22 Standard Test Method for Measuring the Steady-State Thermal Transmittance of Fenestration Systems Using Hot Box Methods
ASTM RR-F02-1010 1992 D3079-Standard Test Method for Water Vapor Transmission of Flexible Heat-Sealed Packages for Dry Products
ASTM C1701/C1701M-17a(2023) Standard Test Method for Infiltration Rate of In Place Pervious Concrete
ASTM D1003-92 Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics
ASTM F1307-14 Standard Test Method for Oxygen Transmission Rate Through Dry Packages Using a Coulometric Sensor
ASTM D1003-21 Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics
ASTM C949-80(2000) Standard Test Method for Porosity in Vitreous Whitewares by Dye Penetration
ASTM C949-80(1995)e1 Standard Test Method for Porosity in Vitreous Whitewares by Dye Penetration
ASTM C949-80(2020) Standard Test Method for Porosity in Vitreous Whitewares by Dye Penetration
ASTM C949-80(2025) Standard Test Method for Porosity in Vitreous Whitewares by Dye Penetration
ASTM D1003-07e1 Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics
ASTM D1003-11 Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics
ASTM C949-80(2007) Standard Test Method for Porosity in Vitreous Whitewares by Dye Penetration
ASTM C949-80(2016) Standard Test Method for Porosity in Vitreous Whitewares by Dye Penetration
ASTM F2622-08(2013) Standard Test Method for Oxygen Gas Transmission Rate Through Plastic Film and Sheeting Using Various Sensors
ASTM D5850-20 Standard Practice for (Analytical Procedure) Determining Transmissivity, Storage Coefficient, and Anisotropy Ratio from a Network of Partially Penetrating Wells
ASTM F1249-01 Standard Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting Using a Modulated Infrared Sensor
ASTM D881-90 Standard test method for determination of visual deviation of transmission lines for transparent plastics
ASTM F1249-90(1995) Standard Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting Using a Modulated Infrared Sensor
ASTM D737-04(2008)e1 Standard Test Method for Air Permeability of Textile Fabrics
ASTM E128-99(2011) Standard Test Method for Maximum Pore Diameter and Permeability of Rigid Porous Filters for Laboratory Use
ASTM F3136-15 Standard Test Method for Oxygen Gas Transmission Rate through Plastic Film and Sheeting using a Dynamic Accumulation Method
ASTM F1249-06 Standard Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting Using a Modulated Infrared Sensor
ASTM E398-20 Standard Test Method for Water Vapor Transmission Rate of Sheet Materials Using Dynamic Relative Humidity Measurement
ASTM D4106-15 Standard Test Method for (Analytical Procedure) for Determining Transmissivity and Storage Coefficient of Nonleaky Confined Aquifers by the Theis Nonequilibrium Method
ASTM D737-04(2012) Standard Test Method for Air Permeability of Textile Fabrics
ASTM C1781/C1781M-21 Standard Test Method for Surface Infiltration Rate of Permeable Unit Pavement Systems
ASTM F1863-98 Standard Test Method for Measuring the Night Vision Goggle-Weighted Transmisivity of Transparent Parts
ASTM C1781/C1781M-18e1 Standard Test Method for Surface Infiltration Rate of Permeable Unit Pavement Systems
ASTM C1781/C1781M-18 Standard Test Method for Surface Infiltration Rate of Permeable Unit Pavement Systems
ASTM D1518-85(1998)e1 Standard Test Method for Thermal Transmittance of Textile Materials
ASTM D3816/D3816M-96(2001) Standard Test Method for Water Penetration Rate of Pressure-Sensitive Tapes
ASTM D1003-07 Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics
ASTM D3985-24 Standard Test Method for Oxygen Gas Transmission Rate Through Plastic Film and Sheeting Using a Coulometric Sensor
ASTM D3816/D3816M-96(2003) Standard Test Method for Water Penetration Rate of Pressure-Sensitive Tapes
ASTM D3816/D3816M-96e1 Standard Test Method for Water Penetration Rate of Pressure-Sensitive Tapes
ASTM D542-13 Standard Test Method for Index of Refraction of Transparent Organic Plastics
ASTM C1781/C1781M-15 Standard Test Method for Surface Infiltration Rate of Permeable Unit Pavement Systems
ASTM D542-00(2006) Standard Test Method for Index of Refraction of Transparent Organic Plastics
ASTM D3816/D3816M-96(2020) Standard Test Method for Water Penetration Rate of Pressure-Sensitive Tapes
ASTM D1276-68(1978) Water vapor transmission rate test method (cycle method)
ASTM D3816/D3816M-96(2007) Standard Test Method for Water Penetration Rate of Pressure-Sensitive Tapes
ASTM C1781/C1781M-14 Standard Test Method for Surface Infiltration Rate of Permeable Unit Pavement Systems
ASTM E424-71(2015) Standard Test Methods for Solar Energy Transmittance and Reflectance (Terrestrial) of Sheet Materials
ASTM E96/E96M-12 Standard Test Methods for Water Vapor Transmission of Materials
ASTM D3385-94 Standard Test Method for Infiltration Rate of Soils in Field Using Double-Ring Infiltrometer
ASTM C1781/C1781M-13 Standard Test Method for Surface Infiltration Rate of Permeable Unit Pavement Systems
ASTM C1781/C1781M-14a Standard Test Method for Surface Infiltration Rate of Permeable Unit Pavement Systems
ASTM D7407-07(2012) Standard Guide for Determining The Transmission of Gases Through Geomembranes
ASTM D3094-18 Standard Practice for Seepage Rate of Aerosol Products
ASTM E424-71(1993) Standard Test Methods for Solar Energy Transmittance and Reflectance (Terrestrial) of Sheet Materials
ASTM E424-71 Standard Methods of Test for Solar Energy Transmittance and Reflectance (Terrestrial) of Sheet Materials
ASTM D3816/D3816M-96(2012) Standard Test Method for Water Penetration Rate of Pressure-Sensitive Tapes
ASTM E514-08 Standard Test Method for Water Penetration and Leakage Through Masonry
ASTM E514-02 Standard Test Method for Water Penetration and Leakage Through Masonry
ASTM E398-13 Standard Test Method for Water Vapor Transmission Rate of Sheet Materials Using Dynamic Relative Humidity Measurement
ASTM E424-71(2007) Standard Test Methods for Solar Energy Transmittance and Reflectance (Terrestrial) of Sheet Materials
ASTM E398-03 Standard Test Method for Water Vapor Transmission Rate of Sheet Materials Using Dynamic Relative Humidity Measurement
ASTM F1249-94b Standard Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting Using a Modulated Infrared Sensor
ASTM F1249-20 Standard Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting Using a Modulated Infrared Sensor
ASTM F1252-21 Standard Test Method for Measuring Optical Reflectivity of Transparent Materials

British Standards Institution (BSI)

14/30293824 DC BS ISO 9050. Glass in building. Determination of light transmittance, solar direct transmittance, total solar energy transmittance, ultraviolet transmittance and related glazing factors
BS ISO 26723:2020 Plastics. Determination of total luminous transmittance and reflectance
BS ISO 22891:2013 Paper. Determination of transmittance by diffuse reflectance measurement
19/30368985 DC BS ISO 26723. Plastics. Determination of total luminous transmittance and reflectance
BS ISO 22891:2007 Paper. Determination of transmittance by diffuse reflectance measurement

German Institute for Standardization

DIN 67507:1980 German Standards: Light transmittance, radiation transmittance and total energy transmittance of architectural glass
DIN 53380:1969 Testing Plastic Films to Determine Gas Transmission Rate

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO ASTM D1003:2015 Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics

Danish Standards Foundation

DS/EN 379:1994 Specification for welding filters with switchable luminous transmittance and welding filters with dual luminous transmittance

American Association of Textile Chemists and Colorists

AATCC 204-2017 Water Vapor Transmission of Textiles
AATCC 204-2015 Water Vapor Transmission of Textiles
AATCC 204-2019 Water Vapor Transmission of Textiles

Association Francaise de Normalisation

NF ISO 22891:2013 Paper - Determination of transmittance by measuring diffuse reflectance
NF Q03-106*NF ISO 22891:2013 Paper - Determination of transmittance by diffuse reflectance measurement

Korean Agency for Technology and Standards (KATS)

KS M ISO 22891:2009 Paper-Determination of transmittance by diffuse reflectance measurement
KS X ISO 12645-2006(2016) Graphic technology－Process control－Certified reference material for opaque area calibration of transmission densitometers
KS B 5426-2013(2018) Method for measuring spectral transmittance of a photographic lens
KS B 5426-1988 Method for measuring spectral transmittance of a photographic lens
KS X ISO 12645-2006(2021) Graphic technology－Process control－Certified reference material for opaque area calibration of transmission densitometers
KS B 5426-2013 Method for measuring spectral transmittance of a photographic lens

International Organization for Standardization (ISO)

ISO 22891:2007 Paper - Determination of transmittance by diffuse reflectance measurement
ISO 22891:2013 Paper - Determination of transmittance by diffuse reflectance measurement
ISO/FDIS 23742:2024 Test method for the evaluation of permeability and filtration efficiency distribution of bag filter medium
ISO/DIS 23742:2023 Test method for the evaluation of permeability and filtration efficiency distribution of bag filter medium

Japanese Industrial Standards Committee (JISC)

JIS K 6549:1977(1986) Testing Method for Water Vapour Permeability of Leather

COMMISSION FOR THE STANDARDS, METROLOGY AND QUALITY OF VIETNAM (STAMEQ)

TCVN 6176-2009 Standard Test Method for Thermal Transmittance of Textile Materials