Hot pressing instrument parameters

Hot pressing instrument parameters, Total:237 items.

The international standard classification for "Hot pressing instrument parameters" includes: Chemical analysis of metals , Lathes , Non-destructive testing , Other fluid power system components , Transformers. Reactors , Optical measuring instruments , Equipment for the metallurgical industry , Moulding equipment , Rolling, extruding and drawing equipment , Geology. Meteorology. Hydrology , Astronomy. Geodesy. Geography , Metrology and measurement in general , Measurement of electrical and magnetic quantities , Mechanical testing of metals , Measurement of fluid flow , Heat exchangers , Copper and copper alloys , Mechanical testing , Other standards related to optics and optical measurements , Exploratory and extraction equipment , Medical Sciences and health care facilities in general .

The Chinese standard classification for "Hot pressing instrument parameters" includes: Optical instrument in general , Lathe , X ray, magnetic powder, fluorescent light and other defectoscope , Hydraulic and pneumatic device , Heat-exchange equipment , Transformer , Flow capacity and material level instrument , Optical metrological instrument , Casting equipment , Rolling equipment , Hydrology and water conservancy instrument , Digital display instrument , Engineering investigation and geotechnical engineering in general , Metal mechanical property test method , Display recording instrument , Metal material testing machine , Optoelectronic device assembly , Petroleum drilling & production equipment and instrument , Oceanographic instrumentation , Saw timber, artificial board machinery and tools , Medical science .

Professional Standard - Machinery

JB/T 10564-2006 Basic parameters for flow measuring instruments
JB/T 9399-1999 Main parameter series for the X-ray analytical instrumentation
JB/T 2094-1999 Hot saw basic parameters
JB/T 6303-1992 Calcium carbide furnace transformer technical parameters and requirements
JB/T 9399-2010 Main parameter series for the X-ray analytical instrumentation
JB/T 4714-1992 Type and Basic Parameter of Floating Heat Exchanger and Condenser
JB/T 7440-1994 Die-casting technique parameter tester
JB/T 6309.1-2013 Hot chamber die casting machine - Part 1: Basic parameters
JB/T 4715-1992 Type and Basic Parameter of Fixed Tube-Sheet Heat Exchanger
JB/T 8387-2010 Non-destructive testing instruments Main parameter for the industrial detection X-ray tube
JB/T 8506-2006 Specification and technical requirements for yellow - phosphorus furnace transformers
JB/T 4740-1997 Type and Basic Parameters of Air cooled Heat Exchanger
JB/T 4136.1-1999 Meter Lathe Parameters
JB/T 10574-2006 Optical length measuring instruments -- Basic parameters
JB/T 6303-2004 Specification and technical requirements for calcium carbide furnace transformers
JB/T 2094-2010 Hot saw basic parameters
JB/T 5921-1991 Basic parameters of coolers for hydraulic systems
JB/T 9330-1999 The basic parameter for diaphragm plate of optical instrument
JB/T 4717-1992 Type and Basic Parameter of U Tube Heat Exchanger
JB/T 6266-1992 Optical Comparator for Angle Measurement - Basic Parameter
JB/T 9346-1999 Basic parameters for spectrophotometer
JB/T 8506-1996 Yellow phosphorus furnace transformer technical parameters and requirements
JB/T 8127.1-1995 Series parameters for fuel fired heaters
JB/T 7808-2010 Non-destructive testing instruments Main parameter series for the industrial X-ray equipment
JB/T 8083-2000 Die casting machines — Basic paramenters
JB/T 5921-2006 Hydraulic fluid power-Basic parameters of the cooler
JB/T 10574-2013 Optical Length Measuring Instruments - Basic Parameters
JB/T 11183.1-2011 Dense muscle-type heat exchanger -Part 1:Basic parameters

Professional Standard - Construction Industry

JG/T 329-2011 Concrete thermal parameters tester

Guangdong Provincial Standard of the People's Republic of China

DB44/T 1929-2016 parametric regulator

水利部

SL/T 136-2017 Calibration method of concrete thermal parameter measuring instrument

Professional Standard - Water Conservancy

SL 136-2017 SL/T 136-2017 (Calibration method for apparatus testing thermal parameters of concrete)

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 15406-1994 Primary parameters and general technical specifications for geotechnical apparatus
GB/T 1314-1991 Basic parameters for flow measuring instruments
GB/T 28712.4-2023 Types and basic parameters of heat exchangers—Part 4: Thermo-siphon reboilers
GB/T 10228-1997 Specification and technical requirements for dry-trpe power transformers
GB/T 13970-2008 Basic parameter terms of digital instruments
GB/T 43597-2023 Test method for parameters of thermoelectric terahertz detector
GB/T 13970-2008 Basic parameter terms of digital instruments
GB/T 28712.6-2023 Types and basic parameters of heat exchangers—Part 6：Air cooled heat exchanger
GB/T 10228-2015 Specification and technical requirements for dry-type power transformers
GB/T 28712.3-2012 Types and basic parameters of heat exchangers - Part 3: U-tube heat exchangers
GB/T 28712.1-2023 Types and basic parameters of heat exchangers—Part 1: Floating head exchangers
GB/T13970-2008 Basic parameter terms of digital instruments
GB/T 21838.1-2008 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method
GB/T 28712.3-2023 Types and basic parameters of heat exchangers—Part 3: U-tube heat exchangers
GB/T 10228-2008 Specification and technical requirments for dry-type power transformers
GB/T 22067.3-2008 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks
GB/T 28712.5-2023 Types and basic parameters of heat exchangers—Part 5：Spiral heat exchangers
GB/T 28712.6-2012 Type and basic parameters of heat exchanger - Part 6：air cooled heat exchanger
GB/T 3720-1988 Optical length measuring instruments--Basic parameters
GB/T 21838.3-2022 Metallic materials—Instrumented indentation test for hardness and materials parameters—Part 3:Calibration of reference blocks
GB/T 21838.3-2008 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks
GB/T 10228-2023 Technical parameters and requirements for dry-type power transformers
GB/T 28712.1-2012 Types and basic parameters of heat exchangers - Part 1：floating heat exchangers
GB/T 15406-2007 Primary parameter and general specification for geotechnical engineering instrument
GB/T 13970-1992 Basic parameter series of digital instruments
GB/T 15966-1995 Primary parameter and general specification for hydrologic instrument
GB/T 28712.5-2012 Types and basic parameters of head exchangers - Part 5：Spiral heat exchangers
GB/T 15966-2007 Primary parameter and general specification for hydrologic instrument

Professional Standard - Petroleum

SY/T 5097-2006 Technical specifications of multi-parameter monitoring instrument of drilling/servicing rig
SY/T 5097-1996 Technical conditions of multi-parameter instrument for drilling (workover) well
SY/T 5377-2013 Specification for Drilling Fluid Testing Instruments
SY/T 6971-2013 Multi-parameter Drilling Instrumentation Testing Equipment
SY 5097-2006 Technical conditions of multi-parameter instrument for drilling (workover) well
SY 5377-2013 Technical conditions of drilling fluid parameter testing equipment
SY/T 6739-2008 Technical specifications of drilling parameter monitor

Group Standards of the People's Republic of China

T/ZJDJ 005-2022 Digital display electric parameter measuring instrument
T/GDC 172-2022 Lifewave health parameter detector
T/ZPP 045-2023 Multi-parameter online water quality monitor
T/CECS 10101-2020 Multi-parameter monitoring instrument for indoor environment of civil building

能源部

SY/T 5097-1991 Drilling multi-parameter instrument

Professional Standard - Ocean

HY/T 126-2009 Multiparameter water quality monitor

国家能源局

NB/T 10286-2019 Single-phase AC parameter voltage stabilizer
NB/T 10172-2019 Technical specifications of operational parameter tester for mine air compressors

National Metrological Technical Specifications of the People's Republic of China

JJF(建材) 164-2020 Calibration specification for on-site photothermal parameter measuring instrument for architectural glass
JJF(机械) 1070-2021 Calibration specification for zinc oxide surge arrester DC parameter tester
JJF(机械)1070-2021 Calibration specifications for zinc oxide arrester DC parameter tester

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 15966-2017 Primary parameters and general technical conditions for hydrologic instruments

Professional Standard - Electron

SJ 1887-1981 Major technical parameters for thermistors

未注明发布机构

ULC-S135:2022-2022 STANDARD TEST METHOD FOR THE DETERMINATION OF COMBUSTIBILITY PARAMETERS OF BUILDING MATERIALS USING AN OXYGEN CONSUMPTION CALORIMETER (CONE CALORIMETER)
DIN EN ISO 14577-1 E:2012-03 Instrumental indentation testing of metallic materials for hardness and material parameters Part 1: Test methods (draft)
DIN 2271-3:1976 Verification of geometrical parameters - Pneumatic length measurement (air gauging) - Part 3: Characteristics of instruments working in the high-pressure range - requirements, testing

Professional Standard - Nuclear Industry

EJ/T 1050-2012 Graphical symbols, text codes and parameter symbols of nuclear instruments
EJ/T 1050-1997 Graphical symbols, writing abbreviations and parameter symbols for nuclear instruments

National Metrological Verification Regulations of the People's Republic of China

JJG(民航) 035-1996 Verification Regulation of ИВП Ouput Parameter Test Set
JJG(电子) 310003-2006 Specification for verification of capacitor parameter testers for semiconductor discrete devices
JJG(电子) 31012-2007 Verification Regulations for Integrated Operational Amplifier Parameter Tester
JJG(电子) 310002-2006 Specification for verification of DC parameter testers for semiconductor discrete devices
JJG(铁道) 150-2009 Measuring instrument for contact wire geometric parameter

Professional Standard - Forestry

LY/T 1313-2002 Defibrator -- Parameters

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 21838.1-2019 Metallic materials—Instrumented indentation test for hardness and materials parameters—Part 1:Test method

工业和信息化部

JBT13738-2019 Portable multi-parameter water quality analyzer
JB/T 8506-2018 Yellow phosphorus furnace transformers-Specification and technical requirements
JB/T 13738-2019 Portable multiparameter analyzer for water quality
JB/T 13906.1-2020 Fast hydraulic press of hot stamping-Part 1: Types and basic parameters

工业和信息化部/国家能源局

JB/T 6303-2016 Technical parameters and requirements of calcium carbide furnace transformer
JB/T 13046-2017 Parameters measuring instrument for oil pipe screw thread

卫生健康委员会

WS/T 659-2019 Safety management for multi-parameter patient monitor

Professional Standard - Railway

TB/T 3227-2010 Measuring instruments for contact wire geometry

Military Standard of the People's Republic of China-General Armament Department

GJB 8860-2016 Calibration procedures for multi-parameter monitors
GJB 8361-2015 Parameter testing method of military laser power energy testing instrument
GJB 2740-1996 Pulse laser rangefinder parameter series

Professional Standard - Electricity

DL/T 615-1997 Guide to the selection of characteristic quantities of HV AC circuit - breakers
DL/T 615-2013 Guide to the Ions of Characteristic Quantities of HV AC circuit-breakers
DL/T 1334-2014 Measuring Instrument for Piezoresistive Apparatus

未注明发布机构

DIN EN ISO 14577-1 E:2012-03 Instrumental indentation testing of metallic materials for hardness and material parameters Part 1: Test methods (draft)
DIN 2271-3:1976 Verification of geometrical parameters - Pneumatic length measurement (air gauging) - Part 3: Characteristics of instruments working in the high-pressure range - requirements, testing
ULC-S135:2022-2022 STANDARD TEST METHOD FOR THE DETERMINATION OF COMBUSTIBILITY PARAMETERS OF BUILDING MATERIALS USING AN OXYGEN CONSUMPTION CALORIMETER (CONE CALORIMETER)

Professional Standard - Military and Civilian Products

WJ 2098-1992 Pulse laser range finder parameter series
WJ 2240-1994 Parameter series of hydraulic pumps and motors for weapons
WJ 954-1977 Die-casting mold parts for optical instruments Die-casting molds for optical instruments Compression springs

Professional Standard-Ships

CB 1190-1988 Longitudinal Vibration Piezoelectric Transducer Parameter Series

机械工业部

JB/T 7395.4-1994 Electrical Measuring Instrumentation Terminology Digital Meters and Analog-to-Digital Converters

British Standards Institution (BSI)

BS ISO 14577-5:2022 Metallic materials. Instrumented indentation test for hardness and materials parameters - Linear elastic dynamic instrumented indentation testing (DIIT)
20/30383255 DC BS ISO 14577-5. Metallic materials. Instrumented indentation test for hardness and materials parameters. Part 5. Linear elastic dynamic instrumented indentation testing (DIIT)
24/30458534 DC BS EN ISO 14577-3 Metallic materials -Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks
BS EN 61290-5-1:2006 Optical amplifiers - Test methods - Reflectance parameters - Optical spectrum analyzer method
PD ISO/TS 20758:2019 Traditional Chinese medicine. Abdominal physiological parameter detectors
BS EN ISO 14577-3:2015 Metallic materials. Instrumented indentation test for hardness and materials parameters. Calibration of reference blocks
BS EN ISO 14577-3:2002 Metallic materials. Instrumented indentation test for hardness and materials parameters. Calibration of reference blocks

Indonesia Standards

SNI 05-6047.2-1999 Heat exchangers - Method for parameter measurement for performance determination. Part 2: Fluid pressure

YU-JUS

JUS M.A1.032-1980 Classification of imtruments and devices for measurement and evaluation of the geometrical parameters of surface finish

International Organization for Standardization (ISO)

ISO 14577-5:2022 Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 5: Linear elastic dynamic instrumented indentation testing (DIIT)
ISO/CD 14577-3:2023 Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 3: Calibration of reference blocks
ISO 14577-1:2015 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method
ISO 14577-1:2002 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method
ISO/CD 14577-1:2023 Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 1: Test method
ISO/DTS 19096 Metallic materials — Instrumented indentation test for hardness and materials parameters — Evaluation of stress change using indentation force differences
ISO/TS 19096:2023 Metallic materials — Instrumented indentation test for hardness and materials parameters — Evaluation of stress change using indentation force differences
ISO 5151:1994 Non-ducted air conditioners and heat pumps - Testing and rating for performance
ISO/TS 20758:2019 Traditional Chinese medicine — Abdominal physiological parameter detectors
ISO 14577-3:2015 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks
ISO 14577-3:2002 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks

RO-ASRO

STAS 10995-1977 Working machines and equipments for plastics ADIABATIG EXTRUDING MACHINES Main parameters

SCC

12/30267268 DC BS EN 61869-9. Instrument Transformers. Part 9. Digital interface for instrument transformers
12/30274900 DC BS IEC 61869-9. Instrument transformers. Part 9. Digital interface for instrument transformers
ULC 135-2004 Standard Test Method for the Determination of Combustibility Parameters of Building Materials Using an Oxygen Consumption Calorimeter (Cone Calorimeter)
NS-EN ISO 14577-3:2002 Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 3: Calibration of reference blocks (ISO 14577-3:2002)
12/30248590 DC BS ISO 14577-3. Metallic materials. Instrumented indentation test for hardness and materials parameters. Part 3. Calibration of reference blocks
UNE-EN ISO 14577-3:2005 Metallic materials - Instrumented indentation test for hardness and materials parameters. Part 3: Calibration of reference blocks (ISO 14577-3:2002)
NS-EN ISO 14577-3:2015 Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 3: Calibration of reference blocks (ISO 14577-3:2015)
AENOR UNE-EN ISO 14577-3:2016 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks (ISO 14577-3:2015)
DANSK DS/EN ISO 14577-3:2015 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks (ISO 14577-3:2015)
AS C45:1928 Instrument transformers
BS 81:1936 Instrument transformers
BS 81:1927 Instrument transformers
DIN EN ISO 14577-3 E:2012 Draft Document - Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks (ISO/DIS 14577-3:2012); German version prEN ISO 14577-3:2012
BS PD ISO/TS 20758:2019 Traditional Chinese medicine. Abdominal physiological parameter detectors
NS-EN ISO 14577-1:2002 Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 1: Test method (ISO 14577-1:2002)
12/30248587 DC BS ISO 14577-1. Metallic materials. Instrumented indentation test for hardness and materials parameters. Part 1. Test method
DIN IEC 62594-1 E:2009 Draft Document - Electrical pressure measuring instruments - Pressure transmitters, pressure measuring instruments - Part 1: Definitions, specifications on the data sheets (IEC 65B/715A/CD:2009)

AT-ON

ONORM M 6773-2001 Surface texture of tooth flanks - Roughness parameters, determination of roughness parameters using stylus instruments, measuring instruments and measuring conditions
ONORM E 1372-1955 Detector. Ball pressure detector, heating mandrel detector
ONORM E 1360-1960 Detector. Ball pressure detector, heating mandrel detector

Korean Agency for Technology and Standards (KATS)

KS B ISO 14577-3-2017 Metallic materials－Instrumented indentation test for hardness and materials parameters－Part 3：Calibration of reference blocks
KS B ISO 14577-1:2015 Metallic materials-Instrumented indentation test for hardness and materials parameters-Part 1:Test method
KS B ISO 14577-1:2004 Metallic materials-Instrumented indentation test for hardness and materials parameters-Part 1:Test method
KS B ISO 14577-1-2015 Metallic materials－Instrumented indentation test for hardness and materials parameters－Part 1：Test method
KS W 0613-1976(2012) Equipment standard of aircraft instruments and panel
KS B ISO 14577-3-2004(2009) Metallic materials－Instrumented indentation test for hardness and materials parameters－Part 3：Calibration of reference blocks
KS B ISO 14577-3:2004 Metallic materials-Instrumented indentation test for hardness and materials parameters-Part 3:Calibration of reference blocks
KS B ISO 14577-2-2017 Metallic materials-instrumented indentation test for hardness and materials parameters－Part 2：Verification and calibration of testing machines

RU-GOST R

GOST 14064-1968 Hydraulic accumulators. Basic parameters
GOST 21712-1983 Piezoelectric resonators. Main characteristics
GOST 25851-1983 Radiometric instruments. Methods of main parameters measurement
GOST 10458-1981 Transformers for induction electrothermal installations for frequency from 500 to 10000Hz. Basic parameters
GOST 25678-1983 Instruments for measurements of pulse laser energy. Types. Basic parameters. Methods for measurement of basic parameters
GOST 21107.1-1975 Gas discharge devices. Methods of measurement of electrical parameters of stabilizing tube
GOST 20271.1-1991 Microwave electronic devices. Methods of measuring electrical parameters
GOST 23873-1979 Transformers multifunctional electronic and magnetic. Basic parameters
GOST 21281-1982 Piezoelectric filters. Main parameters
GOST 28953-1991 Photosensitive charge transfer device. Measuring methods for parameters
GOST 14213-1989 Logging cable tips, sonde heads and logging tools heads. Types, main parameters, dimensions and technical requirements
GOST 20271.3-1991 Microwave electronic devices. Methods of measuring of modulating impulse parameters
GOST 25450-1982 Surface regenerative heaters. Types, basic parameters and dimensions
GOST 6809-1987 Hot stamping crank presses. Basic parameters and dimensions. Norms of accuracy
GOST 25165-1982 Connections of SSI instruments and devices with external pneumatic lines. Types, basic parameters and dimensions. Technical requirements
GOST 23012-1978 Devices multiposition counting indicated and sivitching. Basic parameters
GOST 20962-1975 Mean frequency static transducer for electrothermy. Basic parameters
GOST 15518-1987 Plate heat exchanges. Types, parameters and basic dimensions
GOST R 50355-1992 Digital instruments to measure immittance parameters. General technical requirements and methods of tests
GOST 10387-1981 Measuring machines for checking fine pitch spur gears. Types. Basic dimensions, standards of accuracy
GOST 25449-1982 Water and steam heatexchangers. Types, basic parameters and sizes
GOST 12678-1980 Direct-acting pressure regulators. Main parameters
GOST 9847-1979 Optical instruments for surface roughness parameters measuring. Basis parameters and types

GOST

GOST R 70957-2023 Piezoelectric resonators. Parameters system
GOST R 70785-2023 Piezoelectric filters. Parameter system
GOST 8074-1982 Toolmaker's microscopes. Types, main parameters and dimensions. Technical requirements
GOST R 71048-2023 Integrated circuits. Voltage regulators. Parameters system

VN-TCVN

TCVN 2850-1979 Hot stamping crank presses.Basic parameters and dimensions

GOSTR

GOST 18630-1973 Puise transformers. Basis parameters
GOST 9879-1976 Ship's power transformers. Basic parameters
GOST 24469-1980 Instruments for measurements laser radiation parameters. General technical requirements

International Electrotechnical Commission (IEC)

IEC 61869-9:2016 Instrument transformers - Part 9: Digital interface for instrument transformers
IEC 61290-1-2:2005 Optical amplifiers - Test methods - Part 1-2: Power and gain parameters - Electrical spectrum analyzer method

GSO

BH GSO ISO 14577-3:2015 Metallic materials -- Instrumented indentation test for hardness and materials parameters -- Part 3: Calibration of reference blocks
OS GSO ISO 14577-3:2014 Metallic materials -- Instrumented indentation test for hardness and materials parameters -- Part 3: Calibration of reference blocks
BH GSO IEC 61301:2016 Nuclear instrumentation - Digital bus for NIM instruments
OS GSO IEC 61301:2015 Nuclear instrumentation - Digital bus for NIM instruments

ES-UNE

UNE-EN ISO 14577-3:2016 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks (ISO 14577-3:2015)
UNE-EN ISO 14577-1:2016 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method (ISO 14577-1:2015)

German Institute for Standardization

DIN EN ISO 14577-3:2015-11 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks (ISO 14577-3:2015); German version EN ISO 14577-3:2015
DIN 16086:2006-01 Electrical pressure measuring instruments - Pressure transmitters, pressure measuring instruments - Concepts, specifications on data sheets
DIN 16086:2006 Electrical pressure measuring instruments - Pressure transmitters, pressure measuring instruments - Concepts, specifications on data sheets
DIN EN ISO 14577-1:2003 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method (ISO 14577-1:2002); German version EN ISO 14577-1:2002
DIN EN ISO 14577-1:2015-11 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method (ISO 14577-1:2015); German version EN ISO 14577-1:2015
DIN EN 306:1997 Heat exchangers - Methods of measuring the parameters necessary for establishing the performance; German version EN 306:1997
DIN 2271-3:2000 Verification of geometrical parameters - Pneumatic length measurement (air gauging) - Part 3: Characteristics of instruments working in the high-pressure range - requirements, testing
DIN 43751-4:1990-06 Measurement and control; digital measuring instruments; instruments for measuring time reference quantities; definitions, tests and data sheet details / Note: Applies in conjunction with DIN 43751-1 (1987-05).
DIN EN ISO 14577-3:2003 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks (ISO 14577-3:2002); German version EN ISO 14557-3:2002

CZ-CSN

CSN 35 6535-1983 Electronic measuring instruments. Succesive process spectra analyzers. Nomenclature of pnrameters
CSN ON 27 1989-1968 Hydraulic buffer. The main technical parameters
CSN 35 1360-1974 Instrument transformers
CSN 08 1161-1990 Heaters, surface, regenerative. Types. Fundamental parameters
CSN 35 8850 Cast.1-1984 Semiconductor radiators. Main parameters of measuring methods
CSN 35 1302 ZZ1-2000 Instrument voltage transformer

European Committee for Standardization (CEN)

DD ENV 306-1990 Heat exchangers; methods of measuring the parameters necassary for establishing the performance
prEN ISO 14577-1 rev Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method
prEN ISO 14577-3 rev Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks

Association of German Mechanical Engineers

DVS 2205-1-1985 Mathematical calculation of containers and vessels of thermoplastic polymers; parameters

ZA-SANS

SANS 14577-3:2009 Metallic materials - Instrumented indentation test for hardness and materials parameters Part 3: Calibration of reference blocks
SANS 14577-1:2009 Metallic materials - Instrumented indentation test for hardness and materials parameters Part 1: Test method

Danish Standards Foundation

DS/EN ISO 14577-1:2003 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method
DS/EN ISO 14577-3:2003 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks

Lithuanian Standards Office

LST EN ISO 14577-3:2003 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks (ISO 14577-3:2002)

BSI

BS 81:1919 Instrument transformers

Association Francaise de Normalisation

NF A03-155-1*NF EN ISO 14577-1:2015 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1 : test method
NF A03-155-1:2003 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1 : test method.
NF E38-322*NF EN 306:1997 Heat exchangers. Methods of measuring the parameters necessary for establishing the performance.
NF A03-155-3*NF EN ISO 14577-3:2015 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3 : calibration of reference blocks
NF A03-155-3:2003 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3 : calibration of reference blocks.
NF C93-805-1-2*NF EN 61290-1-2:2006 Optical amplifiers - Test methods - Part 1-2 : power and gain parameters - Electrical spectrum analyzer method.

Japanese Industrial Standards Committee (JISC)

JIS C 1736:2003 Instrument transformers for metering service

IN-BIS

IS 10732-1983 Pressure Vessel Instrument Glass Buyer Data Sheet

PL-PKN

PN G03352-1972 Driliing geophysies Ends of heads ins?ruments intratelluric Principal parame?ers

Standard Association of Australia （SAA）

AS 60044.3:2004 Instrument transformers - Combined transformers