Calibration test

Calibration test, Total:242 items.

The international standard classification for "Calibration test" includes: Linear and angular measurements , Geology. Meteorology. Hydrology , Electricity. Magnetism. Electrical and magnetic measurements , Mechanical testing of metals , Mechanical testing , Nuclear energy engineering , Iron and steel castings , Irons , Road vehicles in general , Metrology and measurement in general , Other methods of testing of metals , Product and company certification. Conformity assessment , Non-destructive testing of metals , Cutting tools in general , Heat treatment and coating , Materials and components for shipbuilding .

The Chinese standard classification for "Calibration test" includes: Length Measurement , Hydrology and water conservancy instrument , Electromagnetic Measurement , Force and deformation test instrument , Nuclear fuel element and its analytical test method , Casting , Metal material testing machine , Car , Instruments and test devices for vehicle , Standardization and Quality Management , Metal nondestructive testing method , Nonmetal material testing machine , Metallographic testing method , Cutting tools , Vessel materials and their inspection methods .

Group Standards of the People's Republic of China

T/GDASE 0018-2020 Safety Valve Periodical Check and Test
T/QAQ 006-2022 Specification for inspection and acceptance of artificial turf synthetic surface for school sports field
T/HNIMA 001-2023 Calibration method for liquid chromatograph with charged aerosol detector
T/CEC 568-2021 SF6/N2 mixed gas mixture ratio detector calibration and on-site detection method
T/LZZLXH 063-2021 Internal Calibration Specifications for Inspection and Testing Laboratories
T/SJZSYYQXH JZ001-2023 Calibration method of inspection tools for traffic construction products
T/JAS 24-2024 Inspection body and laboratory-Spectification for Verification and Calibration of Instruments and Equipment

Professional Standard - Electricity

DL/T 1787-2017 Calibration specification of relative dissipation factor and capacitance tester

National Metrological Technical Specifications of the People's Republic of China

JJF(机械) 1022-2018 Penetration testing reference block calibration specification
JJF(机械) 1016-2018 Calibration specification of ladder test block for radiographic inspection
JJF 1141-2006 Calibration Specification for Turning Angle Testers for Automobile
JJF(机械) 021-2008 Calibration specification for armature tester
JJF 1953-2021 Calibration Specification for Gas Chromatographs with Sulfur Chemiluminescence Detector
JJF(机械)1022-2018 Penetration testing reference block calibration specification
JJF(机械)1016-2018 Calibration specification of ladder test block for radiographic inspection
JJF(机械) 012-2008 Calibration specification for small power single-phase motor automatic detection device

Professional Standard - Water Conservancy

SL 144.10-2008 calibration methods of water environmental detecting instrument and equipment calibration method of solid-phase extractor(spe)
SL 144-1995 Check method of water environmental detecting instrument and experimental equipment
SL 144-1995（条文说明） Calibration (inspection) method of water environment testing instruments and test equipment

National Metrological Verification Regulations of the People's Republic of China

JJG(轻工) 82-1991 Calibration Regulations for Quartz Watch Calibrator
JJG 779-1992 Cheker of Speed And Mr lege Messr For Cars
JJG(铁道) 152-1995 Verification Regulation of Speedmeter Calibration Equipment for Locomotives
JJG 169-1993 Verification Regulation of Instrument Transformer Test Set
JJG(轻工) 81-1991 Calibration rules for mechanical clock calibrator
JJG(轻工) 79-1991 Calibration rules for watch instrument calibrator
JJG(民航) 043-1997 Verification Regulation of KПA-TПP1T Oil Gauge Tester
JJG 169-2010 Verification regulation of transformer test set
JJG(航天) 25-1987 Verification Regulations for XD-40 Electric Stopwatch Calibrator
JJG(机械) 20-1990 Verification Regulations for Calibration Device of WJM-1 Surface Thermometer
JJG(机械) 77-1992 DSJ type timing checker verification regulations
JJG(航空) 047-1989 MGX-B Clamp Meter Calibrator Verification Regulations
JJG(交通) 018-1999 Verification Regulation of Roller Type Speedometer Tester's Aligner

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 16825.1-2022 Metallic materials—Calibration and verification of static uniaxial testing machines—Part1:Tension/compression testing machines—Calibration and verification of the force-measuring system
GB/T 13634-2000 Calibration of force-proving instruments used for the verification of testing machines
GB/T 7216-2009 Metallographic test for gray cast iron
GB/T 27025-2008 General requirements for the competence of testing and calibration laboratories
GB/T 26656-2011 Metallographic test for compacted (vermicular) graphite cast irons
GB/T 15481-2000 General requirements for the competence of testing and calibration laboratories
GB/T 11809-2008 Test method of weld of fuel rod for PWR - Metallographic examination and radiographic testing
GB/T 12548-2016 Motor vehicles speedometer and odometer calibration method
GB/T 26656-2023 Metallographic test for compacted (vermicular) graphite cast irons
GB/T 25746-2010 Metallographic test for malleable cast iron
GB/T 13634-2008 Calibration of force-proving instruments used for the verification of uniaxlial testing machines
GB/T 36412-2018 Verification and calibration of force standard machines
GB/T 12548-1990 Motor vehicles－Speedometer and odometer－Calibration method
GB/T 9441-2009 Metallographic test for spheroidal graphite cast iron
GB/T 34895-2017(英文版) General rules for metallographic examination of heat treatment
GB/T 11259-1999 STANDARD practice for fabrication and control of steel reference blocks used in ultrasonic inspection
GB/T 9441-1988 Metallographic test for spheroidal graphite cast iron
GB/T 7216-2023 Metallographic test for grey cast iron
GB/T 12310-1990 Sensory analysis method - Paired comparison test

Henan Provincial Standard of the People's Republic of China

DB4109/T 057-2024 Safety valve inspection and calibration requirements

Jiangsu Provincial Standard of the People's Republic of China

DB3204/T 1040-2022 Code of Integrity Behavior for Inspection, Testing, Verification and Calibration Institutions

Yunnan Provincial Standard of the People's Republic of China

DB53/T 681-2015 Testing Laboratory Internal Calibration Specifications

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 11809-2021 Test method of weld of fuel rod for PWR—Metallographic examination and radiographic testing
GB/T 9441-2021 Metallographic test method for spheroidal graphite cast iron
GB/T 38243-2019 Rubber—Calibration and verification of hardness testers
GB/T 27025-2019 General requirements for the competence of testing and calibration laboratories

Taiwan Provincial Standard of the People's Republic of China

CNS 10049-1983 Method of Test for Load Calibration Devices for Verifying Material Testing Machines
CNS 3909-1981 Method of Test for Single Phase Panelboards
CNS 5388-1980 Method of Test for Benzotriazole (Photographic Grade)
CNS 9178-1982 General Rules for Aralytical Method in Gas Chromatography
CNS 6670-1980 Method of Test for Methyl Ethyl Ketone by Gas Chromatography

Hebei Provincial Standard of the People's Republic of China

DB13/T 1442-2011 Inspection and Calibration Method of Crane Overspeed Protection Device
DB1305/T 77-2023 Technical Specifications for Rapid Food Inspection Laboratory in School Canteens

Professional Standard - Agriculture

CNAS-EL-13-2019 Instructions for the approval of relevant requirements for test reports and calibration certificates
CNAS-CL01-A025-2022 Explanation on the Application of Testing and Calibration Laboratory Competence Accreditation Criteria in the Field of Calibration

Professional Standard - Aviation

HB 742-1979 Sample and proofreading sample inspection HB 735-79 slot milling cutter
HB 2242-1976 Sample and proofreading sample inspection HB 2244-76 slot milling cutter
HB 2243-1976 Sample and proofreading sample inspection HB 2245-76 slot milling cutter
HB 2445-1979 Sample and proofreading sample inspection HB 2444-79 slot milling cutter
HB/Z 60-1996 Radiographic inspection
HB/Z 60-1981 Radiographic inspection

工业和信息化部

JB/T 5108-2018 Metallographic test for cast brass

Professional Standard - Railway

TB/T 2787-1997 Metallographic Microscopic Examination of Locomotive Axle
TB/T 2450-1993 Metallographic Inspection for ZG 230-450 Cast Steel

Shaanxi Provincial Standard of the People's Republic of China

DB61/T 1327.13-2023 Qualification Certification of Inspection and Testing Institutions Part 13: Internal Calibration Requirements

Professional Standard - Petroleum

SY/T 6406-1999 Maintenance and inspection for magnetic single - shot & multi - shot survey instruments

Military Standard of the People's Republic of China-General Armament Department

GJB 15481-2001 General requirements for competence of testing and calibration laboratories

Professional Standard - Machinery

JB/T 9986-2013 Micrography tests of heat-treated tool steels
JB/T 9204-1999 Metallographic examination of induction hardened steel parts

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 34895-2017 General rules for metallographic examination of heat treatment

Professional Standard-Ships

CB/T 3694-1995 Method on Inspection of Site Metallurgic Replica
CB 1156-1992 Metallographic Test of Tin Base Bearing Alloy

British Standards Institution (BSI)

BS ISO 19675:2017 Non-destructive testing. Ultrasonic testing. Specification for a calibration block for phased array testing (PAUT)
BS EN ISO 19675:2024 Non-destructive testing. Ultrasonic testing. Specification for a calibration block for phased array testing (PAUT)
BS EN 12223:2000(2008) Non-destructive testing - Ultrasonic examination - Specification for calibration block No.1
BS EN 12223:2000 Non-destructive testing - Ultrasonic examination - Specification for calibration block No.1
BS EN 12681:2003 Founding - Radiographic examination
BS EN 12681-2:2017 Founding - Radiographic examination
BS ISO 18898:2012 Rubber. Calibration and verification of hardness testers
BS ISO 18898:2016 Rubber. Calibration and verification of hardness testers
BS EN 13192:2002(2007) Non-destructive testing - Leak testing - Calibration of reference leaks for gases
BS EN 13192:2002 Non-destructive testing - Leak testing - Calibration of reference leaks for gases
BS EN ISO 20486:2018 Non-destructive testing. Leak testing. Calibration of reference leaks for gases
BS 7935-2:2004 Constant amplitude force calibration - Calibration of the calibration device instrumentation to be used for the dynamic calibration of non-resonant uniaxial dynamic testing systems - Method
BS 7935-1:2004 Constant amplitude dynamic force calibration - Calibration and verification of non-resonant uniaxial dynamic testing systems - Method
BS EN ISO 8222:2002 Petroleum measurement systems - Calibration - Temperature corrections for use when calibrating volumetric proving tanks
BS EN ISO 4545-2:2006 Metallic materials - Knoop hardness test - Verification and calibration of testing machines
BS EN ISO/IEC 17025:2017(2018) General requirements for the competence of testing and calibration laboratories
BS 4289-8:1988 Methods for analysis of oilseeds - Check of the calibration of moisture meters
KT 17-1999 Non destructive testing (radiography)

South African Bureau of Standard

SANS 3453:1984 Non-destructive testing — Liquid penetrant inspection — Means of verification

SCC

DANSK DS/ISO 19675:2024 Non-destructive testing – Ultrasonic testing – Specification for a calibration block for phased array testing (PAUT)
NS-EN 12223:1999 Non-destructive testing — Ultrasonic examination — Specification for calibration block No. 1
DANSK DS/EN 12223:2000 Non-destructive testing - Ultrasonic examination - Specification for calibration block No. 1
DIN EN ISO 19675 E:2024 Draft Document - Non-destructive testing - Ultrasonic testing - Specification for a calibration block for phased array testing (PAUT) (ISO 19675:2017); German and English version prEN ISO 19675:2024
BS ISO/TR 10064-1:1992 Code of inspection practice-Inspection of corresponding flanks of gear teeth
DIN EN ISO 8222 E:2019 Draft Document - Petroleum measurement systems - Calibration - Temperature corrections for use when calibrating volumetric proving tanks (ISO/DIS 8222:2019); German and English version prEN ISO 8222:2019
11/30240176 DC BS EN ISO 2400. Non-destructive testing. Ultrasonic examination. Specification for calibration block No. 1
BS EN ISO/IEC 17025:2000 General requirements for the competence of testing and calibration laboratories
ASQ/ISO 17025-1999 General Requirements for the Competence of Testing and Calibration Laboratories
DANSK DS/ISO/IEC 17025:2022 General requirements for the competence of testing and calibration laboratories
BS EN 27963:1992 Specification for calibration block No. 2 for ultrasonic examination of welds
DANSK DS/EN ISO/IEC 17025/AC:2006 General requirements for the competence of testing and calibration laboratories
BS EN 12407:2000 Natural stone test methods. Petrographic examination
NS-EN 12407:2000 Natural stone test methods — Petrographic examination
BS EN ISO 6507-2:2005 Metallic materials. Vickers hardness test-Verification and calibration of testing machines
NS-ISO 7963:1985 Welds in steel — Calibration block No. 2 for ultrasonic examination of welds

International Organization for Standardization (ISO)

ISO 19675:2017 Non-destructive testing - Ultrasonic testing - Specification for a calibration block for phased array testing (PAUT)
ISO 18898:2006 Rubber - Calibration and verification of hardness testers
ISO 18898:2012 Rubber - Calibration and verification of hardness testers
ISO 18898:2016 Rubber - Calibration and verification of hardness testers
ISO 376:2004 Metallic materials - Calibration of force-proving instruments used for the verification of uniaxial testing machines
ISO 3057:1974 Non-destructive testing; Metallographic replica techniques of surface examination
ISO/IEC 17025:1999 General requirements for the competence of testing and calibration laboratories
ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories
ISO 4993:1987 Steel castings; Radiographic inspection
ISO 376:2011 Metallic materials - Calibration of force-proving instruments used for the verification of uniaxial testing machines
ISO 4546:1993 Metallic materials; hardness test; verification of Knoop hardness testing machines
ISO 376:1999 Metallic materials - Calibration of force-proving instruments used for the verification of uniaxial testing machines

Association Francaise de Normalisation

NF A09-018*NF ISO 19675:2017 Non-destructive testing - Ultrasonic testing - Specification for a calibration block for phased array testing (PAUT)
NF A09-311:2000 Non-destructive testing - Ultrasonic examination - Specification for calibration block No. 1.
NF A09-311*NF EN ISO 2400:2012 Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 1
NF ISO 19675:2017 Non-destructive testing - Ultrasonic testing - Calibration block specifications for multi-element technique
NF A09-310:1987 NON-DESTRUCTIVE TESTING. ULTRASONIC TESTING. CALIBRATION BLOCKS TYPES A AND B.
NF V03-711:1984 Cereals. Check of the calibration of moisture meters.
NF A09-461:2002 Non-destructive testing - Leak test - Calibration of gaseous reference leaks.
NF B10-622*NF EN 12407:2019 Natural stone test methods - Petrographic examination
NF A04-190:2003 Founding - Radiographic examination.
NF A89-510/A1:2003 Non-destructive examination of welds - Radiographic examination of welded joints.
NF EN ISO/IEC 17025:2017 General requirements for the competence of calibration and testing laboratories
NF X50-061*NF EN ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories.
NF X50-061*NF EN ISO/IEC 17025:2017 General requirements for the competence of testing and calibration laboratories
NF B10-622:2007 Natural stone test methods - Petrographic examination.
NF A89-510/A2:2004 Non-destructive testing of welds - Radiographic testing of welded joints.

RO-ASRO

STAS 7802/4-1979 CALIBRATING BLOCKS FOR VERIF YIND AND REGULATING OF FLAW DETECTORS Calibrating blocks type A3
STAS 7802/2-1979 CALIBRATING BLOCKS FOR VERIFYING AND REGULATING OF FLAW DETECTORS Calibrating blocks type Al
STAS 7802/3-1979 CALIBRATING BLOCKS FOR VERIFYING AND REGULATING OF FLAW DETECTORS Calibrating blocks type A2
STAS 7802/5-1979 CALIBRAT IN G BLOCKS FOR GHECK1NG AND REGULATING OF FLAW DETECTORS Calibrating blocks type A4
STAS 8424-1969 There is a clear inspection of the calibration gauge parts.

European Committee for Standardization (CEN)

EN 12223:1999 Non-Destructive Testing - Ultrasonic Examination - Specification for Calibration Block No. 1
EN ISO/IEC 17025:2017 General requirements for the competence of testing and calibration laboratories
EN ISO/IEC 17025:2000 General Requirements for the Competence of Testing and Calibration Laboratories ISO/IEC 17025: 1999

IT-UNI

UNI 6326-1968 Tensile testing machinery. Calibration check
UNSIDER 18-1956 Quality inspection. Terminology related to inspection registration paper

BSI

NS-EN ISO 19675:2024 Non-destructive testing - Ultrasonic testing - Specification for a calibration block for phased array testing (PAUT) (ISO 19675:2017)
DANSK DS/EN ISO 19675:2024 Non-destructive testing – Ultrasonic testing – Specification for a calibration block for phased array testing (PAUT) (ISO 19675:2017)

GSO

GSO ISO 19675:2021 Non-destructive testing — Ultrasonic testing — Specification for a calibration block for phased array testing (PAUT)
BH GSO ISO 19675:2022 Non-destructive testing — Ultrasonic testing — Specification for a calibration block for phased array testing (PAUT)
OS GSO ISO 8222:2009 Petroleum measurement systems – Calibration – Temperature corrections for use when calibrating volumetric proving tanks
OS GSO ISO 12713:2013 Non-destructive testing -- Acoustic emission inspection -- Primary calibration of transducers
GSO ISO 12713:2013 Non-destructive testing -- Acoustic emission inspection -- Primary calibration of transducers
BH GSO ISO 12713:2016 Non-destructive testing -- Acoustic emission inspection -- Primary calibration of transducers
BH GSO ISO 12714:2016 Non-destructive testing -- Acoustic emission inspection -- Secondary calibration of acoustic emission sensors
GSO ISO 12714:2013 Non-destructive testing -- Acoustic emission inspection -- Secondary calibration of acoustic emission sensors
GSO ISO/IEC 17025:2021 General requirements for the competence of testing and calibration laboratories
BH GSO ISO/IEC 17025:2022 General requirements for the competence of testing and calibration laboratories
BH GSO OIML D36:2023 Pipe provers for verification and calibration of measuring systems for liquids
GSO OIML D36:2023 Pipe provers for verification and calibration of measuring systems for liquids

Japanese Industrial Standards Committee (JISC)

JIS Z 2340:2002 Confirmation method of calibration by visual calibration gauge on magnetic particle and liquid penetrant testing
JIS B 7728:1997 Calibration of force-proving instruments used for the verification of uniaxial testing machines
JIS B 7724:2017 Brinell hardness test -- Verification and calibration of testing machines
JIS B 7556:2022 Calibration and proving test for gas flowmeter
JIS B 7556:2016 Calibration and proving test for gas flowmeter
JIS B 7726:2017 Rockwell hardness test -- Verification and calibration of testing machines and indenters
JIS Q 17025:2005 General requirements for the competence of testing and calibration laboratories

German Institute for Standardization

DIN EN ISO 19675:2024 Non-destructive testing - Ultrasonic testing - Specification for a calibration block for phased array testing (PAUT) (ISO 19675:2017)
DIN EN ISO 19675:2024-04 Non-destructive testing - Ultrasonic testing - Specification for a calibration block for phased array testing (PAUT) (ISO 19675:2017); German and English version prEN ISO 19675:2024
DIN EN ISO/IEC 17025:2000 General requirements for the competence of testing and calibration laboratories
DIN 51220:2003 Materials testing machines - Generals for requirements and for verification and calibration of materials testing machines
DIN EN 12681:2003 Founding - Radiographic examination; German version EN 12681:2003
DIN 16527-1:1993 Printing technology; control patch, control image, control mark; terms
DIN 5684-1:1984 Calibrated and tested round steel link chains for lifting purposes; grade 5
DIN 5684-2:1984 Calibrated and tested round steel link chains for lifting purposes; grade 6

Korean Agency for Technology and Standards (KATS)

KS M ISO 8222-2013 Petroleum measurement systems－Calibration－Temperature corrections for use when calibrating volumetric proving tanks
KS M ISO 18898:2010 Rubber-Calibration and verification of hardness testers
KS B ISO 12713-2023 Non-destructive testing — Acoustic emission inspection — Primary calibration of transducers
KS B ISO 3057:2008 Non-destructive testing－Metallographic replica techniques of surface examination
KS B ISO 12714-2023 Non-destructive testing — Acoustic emission inspection — Secondary calibration of acoustic emission sensors
KS Q ISO/IEC 17025:2006 General requirements for the competence of testing and calibration laboratories
KS D ISO 4993:2003 Steel castings－Radiographic inspection
KS D ISO 4993-2003(2018) Steel castings－Radiographic inspection
KS B ISO 376:2015 Metallic materials－Calibration of force－proving instruments used for the verification of uniaxial testing machines
KS B ISO 9342:2013 Optics and optical instruments ― test lenses for calibration of focimeters
KS B ISO 9342:2003 Optics and optical instruments-Test lenses for calibration of focimeters
KS B ISO 376:2002 Metallic materials-Calibration of force-proving instruments used for the verification of uniaxial testing machines

Spanish Association for Standardization (UNE)

UNE-EN 12407:2007 Natural stone test methods - Petrographic examination
UNE-EN ISO 8222:2003 Petroleum measurement systems. Calibration. Temperature corrections for use when calibrating volumetric proving tanks (ISO 8222:2002)
UNE-EN 12407:2001 Natural stone test methods. Petrographic examination.

CEN - European Committee for Standardization

PREN 12407-2016 Natural stone test methods - Petrographic examination

DIN

DIN EN 12223:2000 Non-destructive testing - Ultrasonic examination - Specification for calibration block No 1
DIN EN 12407:2019 Natural stone test methods - Petrographic examination

Danish Standards Foundation

DS/EN ISO 8222:2003 Petroleum measurement systems - Calibration - Temperature corrections for use when calibrating volumetric proving tanks
DS/EN 12407:2007 Natural stone test methods - Petrographic examination
DS/EN ISO/IEC 17025/AC:2006 General requirements for the competence of testing and calibration laboratories
DS/EN ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories

Association of German Mechanical Engineers

DVS 2916-4-2006 Resistance welding joint inspection metallographic inspection

Lithuanian Standards Office

LST EN 12407-2007 Natural stone test methods - Petrographic examination
LST EN ISO 8222:2002 Petroleum measurement systems - Calibration - Temperature corrections for use when calibrating volumetric proving tanks (ISO 8222:2002)

NL-NEN

NEN 2511-1984 Ultrasonic examination of steel. Calibration block 2

KR-KS

KS B ISO 12713-2018(2023) Non-destructive testing — Acoustic emission inspection — Primary calibration of transducers
KS D ISO 4993-2003(2023) Steel castings－Radiographic inspection

American Society of Mechanical Engineers (ASME)

ASME V V 10-2006 Guide for Verification and Validation in Computational Solid Mechanics

American National Standards Institute （ANSI)

ANSI N323-1978 Radiation protection instrumentation - Test and calibration
ANSI N42.13-2004 Calibration and Usage of "Dose Calibrator" Ionization Chambers for the Assay of Radionuclides
ANSI/ISO/IEC 17025:2005 General Requirements for the Competence of Testing and Calibration Laboratories
ANSI/ASTM/ISO/IEC 17025:2005 General Requirements for the Competence of Testing and Calibration Laboratories

American Society for Testing and Materials (ASTM)

ASTM E126-19(2024) Standard Test Method for Inspection, Calibration, and Verification of ASTM Hydrometers
ASTM C1426-99(2004) Standard Practices for Verification and Calibration of Polarimeters
ASTM C1426-09 Standard Practices for Verification and Calibration of Polarimeters
ASTM E126-13a Standard Test Method for Inspection, Calibration, and Verification of ASTM Hydrometers
ASTM C1426-99 Standard Practices for Verification and Calibration of Polarimeters
ASTM E126-12 Standard Test Method for Inspection, Calibration, and Verification of ASTM Hydrometers
ASTM E126-13 Standard Test Method for Inspection, Calibration, and Verification of ASTM Hydrometers

SE-SIS

SIS SS 11 03 11-1987 Metallic materials - Calibration of force proving instruments used for the verifi-cation of uniaxial testing machines

CZ-CSN

CSN IEC 565:1993 Calibration of hydrophones
CSN 35 6107-1984 Standards of single- and three-phase watt-hour meters Methods of verification
CSN 35 6106-1984 Operating electricity meters. Testing methods for officially authorized verification

Indonesia Standards

SNI ISO/IEC 17025:2008 General requirements for the competence of testing and calibration laboratories

TH-TISI

TIS 17025-2005 General requirements for the competence of testing and calibration laboratories
TIS 1300-1994 General requirements for teh competence of calibration and testing laboratories

Standard Association of Australia （SAA）

AS ISO/IEC 17025:2005/Amdt 1:2006 General requirements for competence of testing and calibration laboratories
AS ISO IEC 17025:1999 General requirements for the competence of testing and calibration laboratories
AS ISO/IEC 17025:1999 General requirements for the competence of testing and calibration laboratories
AS ISO/IEC 17025:2018 General requirements for the competence of testing and calibration laboratories

American Society of Quality Control （ASQC)

ASQ 17025-1999 General requirements for the competence of testing and calibration laboratories T17025E
ASQ 17025-2005 General requirements for the competence of testing and calibration laboratories T804

NZS

NZS ISO/IEC 17025:2018 General requirements for the competence of testing and calibration laboratories

CN-QIYE

Q/GDW 1439-2014 Calibration specification for multi-functional electric measuring and testing device

GOST

GOST ISO/IEC 17025-2009 General requirements for the competence of testing and calibration laboratories

GOSTR

GOST ISO/IEC 17025-2019 General requirements for the competence of testing and calibration laboratories