Measurement of colocalization parameters

Measurement of colocalization parameters, Total:111 items.

The international standard classification for "Measurement of colocalization parameters" includes: Radiographic equipment , Implants for surgery, prosthetics and orthotics , Extraction and processing of petroleum and natural gas , Earth-moving machinery , Road vehicles in general , Linear and angular measurements .

The Chinese standard classification for "Measurement of colocalization parameters" includes: Environmental monitoring instrument and its complete equipment , Medical electronic equipment , Orthopedic devices , Petroleum development , Architectural engineering construction machinery , Basic standards and general methods , Basic standards and general methods .

Professional Standard - Environmental Protection

HJ/T 1-1992 Fixing Installation for Gas Measuring and Sampling

Professional Standard - Medicine

YY/T 0482-2010 Magnetic resonance equipment for medical imaging—Part 1:Determination of essential image quality parameters
YY/T 0482-2022 Magnetic resonance equipment for medical imaging—Determination of essential image quality parameters
YY/T 0813-2010 Standard test method for in situ determination of network parameters of crosslinked ultra high molecular weight polyethylene(UHMWPE)

Professional Standard - Petroleum

SY/T 6490-2023 Specifications for Laboratory Measurement of NMR Parameters of Rock Samples
SY 6490-2014 Specifications for Laboratory Measurement of Rock Sample NMR Parameters
SY/T 6490-2014 Specification for measurement of rock NMR parameter in laboratory
SY/T 6490-2007 Normalization measurement for core NMR parameter in laboratory
SY/T 6490-2000 Specification for core NMR parametermeasurement in laboratory

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 21153-2007 Earth-moving machinery—Units for dimensions performance and capacities and their measurement accuracies
GB/T 7234-1987 Measurement of roundness--Terms, definitions and parameters of roundness
GB/T 12674-1990 Motor vehicles－Weight parameter－Measuring method

Taiwan Provincial Standard of the People's Republic of China

CNS 13918-1997 Basic parameters for the measurement of error performance at bit rates below the primary rate

British Standards Institution (BSI)

BS EN 62464-1:2007 Magnetic resonance equipment for medical imaging - Determination of essential image quality parameters
BS EN ISO 2286-2:1998 Rubber- or plastics-coated fabrics - Determination of roll characteristics - Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate
BS 5775-12:1982 Specification for quantities, units and symbols-Dimensionless parameters
BS EN IEC 62464-1:2019 Magnetic resonance equipment for medical imaging. Determination of essential image quality parameters
BS EN 60444-2:1997 Measurement of quartz crystal unit parameters. Phase offset method for measurement of motional capacitance of quartz crystal units
BS ISO 17572-3:2015 Intelligent transport systems (ITS). Location referencing for geographic databases. Dynamic location references (dynamic profile)
BS ISO 17572-3:2009 Intelligent transport systems (ITS). Location referencing for geographic databases. Dynamic location references (dynamic profile)
BS EN 60444-2:1993 Measurement of quartz crystal unit parameters - Phase offset method for measurement of motional capacitance of quartz crystal units
BS ISO 17572-3:2008 Intelligent transport systems ITS) - Location referencing for geographic databases - Dynamic location references (dynamic profile)

Gosstandart of Russia

GOST R 59864.2-2022 Automobile roads of general use. Roadbed. Methods for measuring geometric parameters
GOST 3295-1973 Hypsometric tables for geopotential altitudes up 50000 m. Characteristics
GOST 25620-1983 Secondary radar systems for air traffic control. The measuring methods of main parameters
GOST 25935-1983 Dosimetric instruments. Methods of measuring main parameters
GOST 27964-1988 Measurement of surface roughness parameters. Terms and definitions
GOST 25369-1982 Measuring photocells. Basic parameters, measuring methods of basic parameters
GOST 22988.0-1978 Gas caunters. Methods of characteristic measurement. General principles
GOST 26874-1986 Ionizing radiation power spectrometers. Methods of basic parameters measurement
GOST R 8.869-2014 State system for ensuring the uniformity of measurements. State verification schedule for means measuring electron paramagnetic resonance spectrum parameters

Standard Association of Australia （SAA）

AS 2900.12:1986 Quantities, units, and symbols - Dimensionless parameters
AS 2900.4:1986 Quantities, units, and symbols - Quantities and units of heat

Association Francaise de Normalisation

NF IEC EN 62464-1:2019 Magnetic resonance devices for medical imaging - Part 1: determination of the main image quality parameters
NF C74-157:2007 Magnetic resonance equipment for medical imaging - Part 1 : determination of essential image quality parameters.
NF A09-252-1*NF EN ISO 14096-1:2020 Non-destructive testing - Qualification of radiographic film digitisation systems - Part 1 : definitions, quantitative measurements of image quality parameters, standard reference film and qualitative control

Swedish Institute for Standards

SS-EN IEC 62464-1:2019 Magnetic resonance equipment for medical imaging - Part 1: Determination of essential image quality parameters
SS-EN 62464-1:2010 Magnetic resonance equipment for medical imaging - Part 1: Determination of essential image quality parameters

Danish Standards Foundation

DS/EN 62464-1:2007 Magnetic resonance equipment for medical imaging - Part 1: Determination of essential image quality parameters
DANSK DS/EN 62464-1:2007 Magnetic resonance equipment for medical imaging - Part 1: Determination of essential image quality parameters
DANSK DS/EN IEC 62464-1:2019 Magnetic resonance equipment for medical imaging – Part 1: Determination of essential image quality parameters
DS/ISO 6318:1990 Measurement of roundness. Terms, definitions and parameters of roundness
DANSK DS/ISO 14096-1:2020 Non-destructive testing – Qualification of radiographic film digitisation systems – Part 1: Definitions, quantitative measurements of image quality parameters, standard reference film and qualitative control

European Telecommunications Standards Institute (ETSI)

ETSI EG 202 057-3 V1.1.1 (2005-04)-2005 Speech Processing, Transmission and Quality Aspects (STQ); User related QoS parameter definitions and measurements; Part 3: QoS parameters specific to Public Land Mobile Networks (PLMN)
EG 202 057-3-2005 Speech Processing@ Transmission and Quality Aspects (STQ); User related QoS parameter definitions and measurements; Part 3: QoS parameters specific to Public Land Mobile Network (PLMN) (V1.1.1)
ETSI EG 202 057-3-2005 Speech Processing, Transmission and Quality Aspects (STQ); User related QoS parameter definitions and measurements; Part 3: QoS parameters specific to Public Land Mobile Networks (PLMN) (V1.1.1)

Korean Agency for Technology and Standards (KATS)

KS C IEC 60444-9-2016 Measurement of quartz crystal unit parameters ― Part 9: Measurement of spurious resonance of piezoelectric crystal units
KS B ISO 14096-1-2007(2022) Non-destructive testing － Qualification of radiographic film digitisation systems － Part 1: Definitions, quantitative measurements of image quality parameters, standard reference film and qualitative contr
KS B ISO 14096-1-2023 Non-destructive testing — Qualification of radiographic film digitisation systems — Part 1: Definitions, quantitative measurements of image quality parameters, standard reference film and qualitative
KS B ISO 14096-1-2007(2017) Non-destructive testing － Qualification of radiographic film digitisation systems － Part 1: Definitions, quantitative measurements of image quality parameters, standard reference film and qualitative contr

International Electrotechnical Commission (IEC)

IEC 62464-1:2007 Magnetic resonance equipment for medical imaging - Part 1: Determination of essential image quality parameters
IEC 62464-1:2018 Magnetic resonance equipment for medical imaging - Part 1: Determination of essential image quality parameters

German Institute for Standardization

DIN 45643-1:1984 Measurement and assessment of aircraft noise; quantities and parameters
DIN 5493-2 Beiblatt 1:1994 Logarithmic ratios of quantities and units, levels, representation reference values and measurement conditions
DIN EN 62464-1:2019 Magnetic resonance equipment for medical imaging - Part 1: Determination of essential image quality parameters (IEC 62B/1068/CDV:2017); German and English version prEN 62464-1:2017
DIN EN 60444-3:1997 Measurement of quartz crystal unit parameters by zero phase technique in a pi-network - Part 3: Basic method for the measurement of two-terminal parameters of quartz crystal units up to 200 MHz by phase technique in a pi-network with compensation of the p

European Committee for Electrotechnical Standardization（CENELEC）

EN 62464-1:2007 Magnetic resonance equipment for medical imaging - Part 1: Determination of essential image quality parameters

Spanish Association for Standardization (UNE)

UNE-EG 202057-3 V1.1.1:2007 Speech Processing, Transmission and Quality Aspects (STQ);User related QoS parameter definitions and measurements;Part 3: QoS parameters specific to Public Land Mobile Networks (PLMN)
AENOR UNE-EN 62464-1:2007 Magnetic resonance equipment for medical imaging - Part 1: Determination of essential image quality parameters
UNE-EN IEC 62464-1:2019 Magnetic resonance equipment for medical imaging - Part 1: Determination of essential image quality parameters (Endorsed by Asociación Española de Normalización in April of 2019.)
UNE-EN 60444-2:1997 MEASUREMENT OF QUARTZ CRYSTAL UNIT PARAMETERS BY ZERO PHASE IN A PI-NETWORK. PART 2: PHASE OFFSET METHOD FOR MEASUREMENT OF MOTIONAL CAPACITANCE OF QUARTZ CRYSTAL UNITS (Endorsed by AENOR in October of 1997.)
AENOR UNE-EN 14096-1:2003 Non-destructive testing- Qualification of radiographic film digitization systems. Part 1: Definitions, quantitative measurements of image quality parameters, standard reference film and qualitative control.
UNE-EN 14096-1:2003 Non-destructive testing- Qualification of radiographic film digitisation systems. Part 1: Definitions, quantitative measurements of image quality parameters, standard reference film and qualitative control.

GCC Standardization Organization

GSO IEC 62464-1:2014 Magnetic resonance equipment for medical imaging - Part 1: Determination of essential image quality parameters
GSO ISO 14096-1:2013 Non-destructive testing -- Qualification of radiographic film digitisation systems -- Part 1: Definitions, quantitative measurements of image quality parameters, standard reference film and qualitative control

Bureau of Indian Standards

IS 1890 Pt.12-1983 Quantities, units and symbols Part 12 Dimensionless parameters
IS 15372-2003 Measurement of Roundness - Terms, Definitions and Parameters of Roundness
IS 17069-1-2019 Non-Destructive Testing —— Qualification of Radiographic Film Digitization Systems Part 1 Definitions, Quantitative Measurements of Image Quality Parameters, Standard Reference Film and Qualitative Control

National Standardisation Body (ASRO)

STAS 1343/3-1986 Water supplies DETERMINATION OF SUPPLY WATER QUANTITIES FOR LIVE STOCK UNITS
STAS 10125-1975 MULTI-PARAMETER SYSTEMS FOR DATA MEASURING AND PROCESSING Methods for measuring the basic parameters
STAS 10093/2-1985 Metrology QUANTITIES AND UNITS OF MEASURE Terminology

European Committee for Standardization (CEN)

DD ENV 306-1990 Heat exchangers; methods of measuring the parameters necassary for establishing the performance

International Telecommunication Union (ITU)

ITU-T X.140-1988 General quality of service parameters for communication via public data networks
ITU-T X.140-1984 General quality of service parameters for communication via public data networks
ITU-R INFORME BT.804 SPANISH-1978 DEFINITIONS OF PARAMETERS FOR AUTOMATIC MEASUREMENT OF TELEVISION INSERTION TEST SIGNALS
ITU-T X.95-1976 Network parameters in public data networks
INFORME BT.804 SPANISH-1978 DEFINITIONS OF PARAMETERS FOR AUTOMATIC MEASUREMENT OF TELEVISION INSERTION TEST SIGNALS
ITU-T J.64-1984 Definitions of parameters for automatic measurement of television insertion test signals

Ente Nazionale Italiano di Unificazione

UNI EN 14096-1:2003 Non-destructive testing - Qualification for radiographic film digitisation systems - Definitions, quantitative measurements for image quality parameters, standard reference film and qualitative control
UNI EN ISO 14096-1:2020 Non-destructive testing - Qualification of radiographic film digitisation systems - Part 1: Definitions, quantitative measurements of image quality parameters, standard reference film and qualitative control

Association of German Mechanical Engineers

VDI VDE 2631 Blatt 10 Berichtigung-2015 Determination of uncertainty in form and position measurement results
VDI 4204 Blatt 1-2022 Evaluation of emission measurements Determination of characteristic quantities for continuous emission monitoring
VDI 4204 Blatt 1-2022 Evaluation of emission measurements Determination of characteristic quantities for continuous emission monitoring

Lithuanian Standards Office

LST EN 62464-1-2007 Magnetic resonance equipment for medical imaging - Part 1: Determination of essential image quality parameters (IEC 62464-1:2007)
LST EN 14096-1-2004 Non-destructive testing - Qualification of radiographic film digitisation systems - Part 1: Definitions, quantitative measurements of image quality parameters, standard reference film and qualitative control

Czech Standards Institute (UNMZ)

CSN 01 1304-1983 Quantitles and units of acoustics

American Society for Testing and Materials (ASTM)

ASTM G5-94(2011)e1 Standard Reference Test Method for Making Potentiostatic and Potentiodynamic Anodic Polarization Measurements
ASTM A1033-04 Standard Practice for Quantitative Measurement and Reporting of Hypoeutectoid Carbon and Low-Alloy Steel Phase Transformations
ASTM A1033-10 Standard Practice for Quantitative Measurement and Reporting of Hypoeutectoid Carbon and Low-Alloy Steel Phase Transformations
ASTM G5-13e2 Standard Reference Test Method for Making Potentiodynamic Anodic Polarization Measurements
ASTM G5-13 Standard Reference Test Method for Making Potentiodynamic Anodic Polarization Measurements

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO IEC 62464-1:2016 Magnetic resonance equipment for medical imaging - Part 1: Determination of essential image quality parameters

The Directorate General of Specifications and Metrology (DGSM)

OS GSO IEC 62464-1:2014 Magnetic resonance equipment for medical imaging - Part 1: Determination of essential image quality parameters
OS GSO ISO 14096-1:2013 Non-destructive testing -- Qualification of radiographic film digitisation systems -- Part 1: Definitions, quantitative measurements of image quality parameters, standard reference film and qualitative control

Comitato Elettrotecnico Italiano

CEI EN 62464-1:2007 Magnetic resonance equipment for medical imaging - Part 1: Determination of essential image quality parameters
CEI EN IEC 62464-1:2019 Magnetic resonance equipment for medical imaging Part 1: Determination of essential image quality parameters

Japanese Industrial Standards Committee (JISC)

JIS Z 4952:2012 Magnetic resonance equipment for medical imaging -- Part 1: Determination of essential image quality parameters
JIS Z 4952:2022 Magnetic resonance equipment for medical imaging -- Part 1: Determination of essential image quality parameters

Standards Norway

NS-ISO 6318:1985 Measurement of roundness — Terms, definitions and parameters of roundness
NS-EN 14096-1:2003 Non-destructive testing — Qualification of radiographic film digitisation systems — Part 1: Definitions, quantitative measurements of image quality parameters, standard reference film and qualitative control

International Organization for Standardization (ISO)

ISO 6318:1985 Measurement of roundness; Terms, definitions and parameters of roundness

American Water Works Association (AWWA)

AWWA ACE93145 Monitoring to Identify Causative Factors of Water Quality Degradation: Frequency, Parameters, and Locations

Polski Komitet Normalizacyjny (PKN)

PN G02316-1991 Measuring meters for hydrogeology. Electrical water level meters with recorders. Types, principal parameters and technical requirements
PN G02317-1991 Measuring meters for hydrogeology. Mechanical water level meters with boosters. Types, principal parameters and technical requirements

Austrian Standards

ONORM M 6773-2001 Surface texture of tooth flanks - Roughness parameters, determination of roughness parameters using stylus instruments, measuring instruments and measuring conditions
ONORM S 5001-3-1993 Acoustics - Quantities, units and definitions - Sound measurement and rating quantities

Alliance of Telecommunications Industry Solutions （ATIS)

ATIS 0100503-2002 Network Performance Parameters for Dedicated Digital Services - Definitions and Measurements
0100503-2002 Network Performance Parameters for Dedicated Digital Services – Definitions and Measurements
T1.503-2002 Network Performance Parameters for Dedicated Digital Services - Definitions and Measurements

American National Standards Institute （ANSI)

ANSI/ATIS 0100503-2002 Network Performance Parameters for Dedicated Digital Services - Definitions and Measurements
ANSI T1.503-2002 Network Performance Parameters for Dedicated Digital Services – Definitions and Measurements

Others: Measurement of colocalization parameters,Measurement of colocalization,Colocalization parameter measurement