Colocalization parameter measurement

Colocalization parameter measurement, Total:108 items.

The international standard classification for "Colocalization parameter measurement" includes: Radiographic equipment , Implants for surgery, prosthetics and orthotics , Extraction and processing of petroleum and natural gas , Road vehicles in general , Linear and angular measurements , Earth-moving machinery , Measurement of fluid flow , On-board equipment and instruments .

The Chinese standard classification for "Colocalization parameter measurement" includes: Environmental monitoring instrument and its complete equipment , Medical electronic equipment , Orthopedic devices , Petroleum development , Basic standards and general methods , Basic standards and general methods , Architectural engineering construction machinery , Display recording instrument , Flow capacity and material level instrument , Spacecraft telemetering and remote sensing system .

Professional Standard - Environmental Protection

HJ/T 1-1992 Fixing Installation for Gas Measuring and Sampling

Professional Standard - Medicine

YY/T 0813-2010 Standard test method for in situ determination of network parameters of crosslinked ultra high molecular weight polyethylene(UHMWPE)
YY/T 0482-2022 Magnetic resonance equipment for medical imaging—Determination of essential image quality parameters
YY/T 0482-2010 Magnetic resonance equipment for medical imaging—Part 1:Determination of essential image quality parameters

Professional Standard - Energy

SY/T 6490-2023 Specifications for Laboratory Measurement of NMR Parameters of Rock Samples

Professional Standard - Petroleum

SY/T 6490-2007 Normalization measurement for core NMR parameter in laboratory
SY/T 6490-2000 Specification for core NMR parametermeasurement in laboratory
SY/T 6490-2014 Specification for measurement of rock NMR parameter in laboratory
SY 6490-2014 Specifications for Laboratory Measurement of Rock Sample NMR Parameters

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 7234-1987 Measurement of roundness--Terms, definitions and parameters of roundness
GB/T 21153-2007 Earth-moving machinery—Units for dimensions performance and capacities and their measurement accuracies
GB/T 1314-1991 Basic parameters for flow measuring instruments
GB/T 12674-1990 Motor vehicles－Weight parameter－Measuring method

Taiwan Provincial Standard of the People's Republic of China

CNS 13918-1997 Basic parameters for the measurement of error performance at bit rates below the primary rate

Group Standards of the People's Republic of China

T/ZJDJ 005-2022 Digital display electric parameter measuring instrument

邯郸市

DB1304/T 348-2020 Detection method of flow parameters of coal mine pipeline gas drainage comprehensive parameter measuring instrument

National Metrological Verification Regulations of the People's Republic of China

JJG(机械) 9-1990 Verification rules for comprehensive parameter measuring instrument of washing machine

Professional Standard - Machinery

JB/T 10564-2006 Basic parameters for flow measuring instruments

Professional Standard - Aerospace

QJ 2670.4-1994 Telemetry Parameter Error Analysis and Precision Evaluation Method - Digital Quantity

Standard Association of Australia （SAA）

AS 2900.12:1986 Quantities, units, and symbols - Dimensionless parameters

GOST

GOST R 59864.2-2022 Automobile roads of general use. Roadbed. Methods for measuring geometric parameters

British Standards Institution (BSI)

BS EN 62464-1:2007 Magnetic resonance equipment for medical imaging - Determination of essential image quality parameters
BS EN ISO 2286-2:1998 Rubber- or plastics-coated fabrics - Determination of roll characteristics - Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate
BS ISO 17572-3:2015 Intelligent transport systems (ITS). Location referencing for geographic databases. Dynamic location references (dynamic profile)
BS ISO 17572-3:2009 Intelligent transport systems (ITS). Location referencing for geographic databases. Dynamic location references (dynamic profile)
BS ISO 17572-3:2008 Intelligent transport systems ITS) - Location referencing for geographic databases - Dynamic location references (dynamic profile)
BS EN IEC 62464-1:2019 Magnetic resonance equipment for medical imaging. Determination of essential image quality parameters
BS EN 60444-2:1997 Measurement of quartz crystal unit parameters. Phase offset method for measurement of motional capacitance of quartz crystal units
BS EN 12896-2:2016(2017) Public transport. Reference data model. Public transport network
BS ISO 17572-2:2009 Intelligent transport systems (ITS). Location referencing for geographic databases. Pre-coded location references (pre-coded profile)
BS ISO 17572-2:2008 Intelligent transport systems (ITS) - Location referencing for geographic databases - Pre-coded location references (pre-coded profile)
BS EN 12896-2:2016 Public transport. Reference data model. Public transport network
BS EN 61106:1993 Videodisks. Methods of measurement for parameters
BS ISO 17572-2:2015 Intelligent transport systems (ITS). Location referencing for geographic databases. Pre-coded location references (pre-coded profile)

SCC

BS 5775-12:1982 Specification for quantities, units and symbols-Dimensionless parameters
BS EN ISO 11670:2000 Lasers. Test methods for laser beam parameters. Beam positional stability
CEI EN 62464-1:2007 Magnetic resonance equipment for medical imaging - Part 1: Determination of essential image quality parameters
DANSK DS/EN IEC 62464-1:2019 Magnetic resonance equipment for medical imaging – Part 1: Determination of essential image quality parameters
CEI EN IEC 62464-1:2019 Magnetic resonance equipment for medical imaging Part 1: Determination of essential image quality parameters
AENOR UNE-EN 62464-1:2007 Magnetic resonance equipment for medical imaging - Part 1: Determination of essential image quality parameters
DANSK DS/EN 62464-1:2007 Magnetic resonance equipment for medical imaging - Part 1: Determination of essential image quality parameters
VDI/VDE 2654 BLATT 2-2020 Characterizing and measuring cutting edges - terms, parameters and parameters
NS-ISO 6318:1985 Measurement of roundness — Terms, definitions and parameters of roundness
AWWA ACE93145 Monitoring to Identify Causative Factors of Water Quality Degradation: Frequency, Parameters, and Locations
CEI EN 61106:1998 Videodisks - Methods of measurement for parameters
DANSK DS/EN 61106:1994 Videodisks - Methods of measurements for parameters

European Committee for Electrotechnical Standardization（CENELEC）

EN 62464-1:2007 Magnetic resonance equipment for medical imaging - Part 1: Determination of essential image quality parameters
EN 61106:1993 Videodisks - Methods of Measurements for Parameters

International Electrotechnical Commission (IEC)

IEC 62464-1:2007 Magnetic resonance equipment for medical imaging - Part 1: Determination of essential image quality parameters
IEC 62464-1:2018 Magnetic resonance equipment for medical imaging - Part 1: Determination of essential image quality parameters

IN-BIS

IS 1890 Pt.12-1983 Quantities, units and symbols Part 12 Dimensionless parameters

RU-GOST R

GOST 25935-1983 Dosimetric instruments. Methods of measuring main parameters
GOST 3295-1973 Hypsometric tables for geopotential altitudes up 50000 m. Characteristics
GOST 25620-1983 Secondary radar systems for air traffic control. The measuring methods of main parameters
GOST 25369-1982 Measuring photocells. Basic parameters, measuring methods of basic parameters
GOST 25370-1982 Measuring photomultipliers. Basic parameters, measuring methods of basic parameters
GOST 27964-1988 Measurement of surface roughness parameters. Terms and definitions
GOST 25678-1983 Instruments for measurements of pulse laser energy. Types. Basic parameters. Methods for measurement of basic parameters
GOST 8.127-1974 Shock-motion parameter measurements. Terms and definitions
GOST 22988.0-1978 Gas caunters. Methods of characteristic measurement. General principles
GOST 26874-1986 Ionizing radiation power spectrometers. Methods of basic parameters measurement

Association Francaise de Normalisation

NF IEC EN 62464-1:2019 Magnetic resonance devices for medical imaging - Part 1: determination of the main image quality parameters
NF C74-157:2007 Magnetic resonance equipment for medical imaging - Part 1 : determination of essential image quality parameters.

Danish Standards Foundation

DS/EN 62464-1:2007 Magnetic resonance equipment for medical imaging - Part 1: Determination of essential image quality parameters
DS/ISO 6318:1990 Measurement of roundness. Terms, definitions and parameters of roundness

German Institute for Standardization

DIN 45643-1:1984 Measurement and assessment of aircraft noise; quantities and parameters
DIN EN 62464-1:2019 Magnetic resonance equipment for medical imaging - Part 1: Determination of essential image quality parameters (IEC 62B/1068/CDV:2017); German and English version prEN 62464-1:2017

Spanish Association for Standardization (UNE)

UNE-EG 202057-3 V1.1.1:2007 Speech Processing, Transmission and Quality Aspects (STQ);User related QoS parameter definitions and measurements;Part 3: QoS parameters specific to Public Land Mobile Networks (PLMN)
UNE-EN IEC 62464-1:2019 Magnetic resonance equipment for medical imaging - Part 1: Determination of essential image quality parameters (Endorsed by Asociación Española de Normalización in April of 2019.)

ETSI - European Telecommunications Standards Institute

EG 202 057-3-2005 Speech Processing@ Transmission and Quality Aspects (STQ); User related QoS parameter definitions and measurements; Part 3: QoS parameters specific to Public Land Mobile Network (PLMN) (V1.1.1)

European Committee for Standardization (CEN)

DD ENV 306-1990 Heat exchangers; methods of measuring the parameters necassary for establishing the performance

GSO

GSO IEC 62464-1:2014 Magnetic resonance equipment for medical imaging - Part 1: Determination of essential image quality parameters
OS GSO IEC 62464-1:2014 Magnetic resonance equipment for medical imaging - Part 1: Determination of essential image quality parameters
BH GSO IEC 62464-1:2016 Magnetic resonance equipment for medical imaging - Part 1: Determination of essential image quality parameters
GSO ISO 14096-1:2013 Non-destructive testing -- Qualification of radiographic film digitisation systems -- Part 1: Definitions, quantitative measurements of image quality parameters, standard reference film and qualitative control
OS GSO IEC 61106:2014 Videodisks - Methods of measurement for parameters

KR-KS

KS C IEC 60444-9-2016 Measurement of quartz crystal unit parameters ― Part 9: Measurement of spurious resonance of piezoelectric crystal units

AT-ON

ONORM S 5001-3-1993 Acoustics - Quantities, units and definitions - Sound measurement and rating quantities
ONORM M 6773-2001 Surface texture of tooth flanks - Roughness parameters, determination of roughness parameters using stylus instruments, measuring instruments and measuring conditions

RO-ASRO

STAS 10125-1975 MULTI-PARAMETER SYSTEMS FOR DATA MEASURING AND PROCESSING Methods for measuring the basic parameters
STAS 1343/3-1986 Water supplies DETERMINATION OF SUPPLY WATER QUANTITIES FOR LIVE STOCK UNITS
STAS 11720-1980 Devices for the mechanization of wel ding WELDING POSITIONERS Basic parametres
STAS 9665/5-1988 VIBRATING SCREENS RESONANCE SCREENS Main parameters

Lithuanian Standards Office

LST EN 62464-1-2007 Magnetic resonance equipment for medical imaging - Part 1: Determination of essential image quality parameters (IEC 62464-1:2007)

International Telecommunication Union (ITU)

ITU-R INFORME BT.804 SPANISH-1978 DEFINITIONS OF PARAMETERS FOR AUTOMATIC MEASUREMENT OF TELEVISION INSERTION TEST SIGNALS
ITU-R REPORT 804-1978 DEFINITIONS OF PARAMETERS FOR AUTOMATIC MEASUREMENT OF TELEVISION INSERTION TEST SIGNALS
ITU-R RAPPORT BT.804 FRENCH-1978 DEFINITIONS OF PARAMETERS FOR AUTOMATIC MEASUREMENT OF TELEVISION INSERTION TEST SIGNALS

International Organization for Standardization (ISO)

ISO 17572-3:2015 Intelligent transport systems (ITS) - Location referencing for geographic databases - Part 3: Dynamic location references (dynamic profile)
ISO 17572-3:2008 Intelligent transport systems (ITS) — Location referencing for geographic databases — Part 3 Dynamic location references (dynamic profile)
ISO 6318:1985 Measurement of roundness; Terms, definitions and parameters of roundness
ISO 17572-2:2015 Intelligent transport systems (ITS) - Location referencing for geographic databases - Part 2: Pre-coded location references (pre-coded profile)
ISO 17572-2:2018 Intelligent transport systems (ITS) - Location referencing for geographic databases - Part 2: Pre-coded location references (pre-coded profile)
ISO 17572-2:2008 Intelligent transport systems (ITS) — Location referencing for geographic databases — Part 2 Pre-coded location references (pre-coded profile)

European Telecommunications Standards Institute (ETSI)

ETSI EG 202 057-3-2005 Speech Processing, Transmission and Quality Aspects (STQ); User related QoS parameter definitions and measurements; Part 3: QoS parameters specific to Public Land Mobile Networks (PLMN) (V1.1.1)

Japanese Industrial Standards Committee (JISC)

JIS Z 4952:2022 Magnetic resonance equipment for medical imaging -- Part 1: Determination of essential image quality parameters
JIS Z 4952:2012 Magnetic resonance equipment for medical imaging -- Part 1: Determination of essential image quality parameters

SE-SIS

SIS SS 401 01 13-1980 Quantities and units — Logarithmic quantities and units

American Society for Testing and Materials (ASTM)

ASTM G5-94(2011)e1 Standard Reference Test Method for Making Potentiostatic and Potentiodynamic Anodic Polarization Measurements

CZ-CSN

CSN 72 9314-1981 Resonance screens. Main parameters and dimensions
CSN 01 1304-1983 Quantitles and units of acoustics

ITU-R - International Telecommunication Union/ITU Radiocommunication Sector

REPORT BT.804-1978 DEFINITIONS OF PARAMETERS FOR AUTOMATIC MEASUREMENT OF TELEVISION INSERTION TEST SIGNALS

American National Standards Institute （ANSI)

ANSI T1.503-2002 Network Performance Parameters for Dedicated Digital Services – Definitions and Measurements
ANSI/ATIS 0100503-2002 Network Performance Parameters for Dedicated Digital Services - Definitions and Measurements

ATIS - Alliance for Telecommunications Industry Solutions

0100503-2002 Network Performance Parameters for Dedicated Digital Services – Definitions and Measurements
T1.503-2002 Network Performance Parameters for Dedicated Digital Services - Definitions and Measurements

Alliance of Telecommunications Industry Solutions （ATIS)

ATIS 0100503-2002 Network Performance Parameters for Dedicated Digital Services - Definitions and Measurements

PL-PKN

PN T01504 ArkusZ23-1974 Transistors Parameters [y] measurements

VN-TCVN

TCVN 3905-1984 Dwelling and public houses.Geometrical parameters

Others: Measurement of colocalization parameters,Colocalization parameters,colocalization measurement,Measurement of colocalization,Colocalization parameter measurement