Wear detection system

Wear detection system, Total:172 items.

The international standard classification for "Wear detection system" includes: Non-destructive testing , Metallic coatings , Surface treatment .

The Chinese standard classification for "Wear detection system" includes: Basic standards and general methods , X ray, magnetic powder, fluorescent light and other defectoscope , Material Protection , Metal physical and chemical property test method in general .

工业和信息化部/国家能源局

JB/T 12725-2016 Non-destructive testing instruments. Ultrasonic automatic detection system

Group Standards of the People's Republic of China

T/NJ 1349-2023 Combine harvesting (harvesting) machine cleaning and separation loss detection system
T/WHHLW 55-2023 Nondestructive Testing System Technical Guide
T/QGCML 1857-2023 Technical specifications for non-destructive testing and penetrant testing systems

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 29302-2012 Non-destructive Testing Instruments - Characterization and Verification of Phased Array Ultrasonic Examination Systems
GB/T 31768.4-2015 Non-destructive testing―Infrared flash thermography―Part 4:System
GB/T 12967.2-2008 Test Methods for anodic oxidation coatings of aluminium and aluminium alloys - Part 2: measurement of wear risistance and wear index of anodic oxidation coatings with an abrasive wheel wear test appaeratus
GB/T 12967.2-1991 Anodizing of aluminium and aluminium alloys-Measurement of wear resistance and wear index of anodic oxidation coatings with an abrasive wheel wear test apparatus
GB/T 14480.3-2008 Non-destructive testing - Equipment for eddy current examination - Part 3: System characteristics and verification
GB/Z 41399-2022 Non-destructive testing instruments—Industrial digital X-ray imaging system
GB/T 25757-2010 Non-destructive testing - Test methods of performance characteristics of automatic magnetic flux leakage testing systems for steel tubes
GB/Z 43410-2023 Non-destructive testing—Automated ultrasonic testing—Selection and application of systems
GB/Z 43414-2023 Non-destructive testing—NDT training syllabuses
GB/T 21355-2008 Non-destructive testing—Classification of computed radiology systems

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 36071-2018 Non-destructive testing instruments—technical requirements of X-ray real-time imaging system
GB/T 35394-2017 Non-destructive testing—X-ray digital radiography—System properties

National Metrological Verification Regulations of the People's Republic of China

JJG 077-2015 Vehicle-mounted road damage video detection system
JJG(交通) 077-2015 Vehicular Video Detecting System for Pavement Distress
JJG 2073-1990 Measuring Instruments for Dissipation Factor
JJG(机械) 102-1992 Verification rules for ring block wear testing machine

Professional Standard - Machinery

JB/T 11607-2013 Non-destructive testing instruments — Industrial X-ray tyre inspection system
JB/T 9214-2010 Non-destructive Testing - Test Methods for Evaluating Performance Characteristics of A-scan Pulse-echo Ultrasonic Testing Systems

交通运输部

JT/T 678-2019 Vehicular video detecting system for pavement distress

国家能源局

SY/T 7394-2017 Recommended practice of erosive wear in piping systems

工业和信息化部

JB/T 13471-2018 Non-destructive testing-Test method for electromagnetic monitoring of metal wear debris in oil

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 38896-2020 Non-destructive testing一 Integrated non-destructive testing- General principles
GB/T 14480.3-2020 Non-destructive testing instruments—Equipment for eddy current examination—Part 3:System characteristics and verification

未注明发布机构

DIN EN 12472:1999 Simulated abrasion and corrosion testing to detect nickel release from overlaid items

Professional Standard - Aviation

HB 20094.3-2012 Test method for determination of wear metals in operating liquid for aviation.Part 3: Energy dispersion X-ray fluorescence spectrometry

Indonesia Standards

SNI 2417-2008 Testing methods for weathering aggregate by Los Angeles abration machine
SNI 05-6706-2002 Opened fray system for frying pans with gaseous fuels
SNI 12-4247-1996 Abrasion resistance testing instrument for basket ball

BR-ABNT

ABNT MB-170-1969 Aggregate Wear Inspection (Los Angeles)
ABNT MB-1311-1979 Cement railway sleepers. Anti-wear testing
ABNT NBR 13517-2010 Optical cables - Abrasion test - Method of test

SCC

VDI 4473-2018 Abrasion wear test bench for components of bulk material conveying systems — wear plug method
VDI 4473-2018 Abrasion wear test bench for components of bulk material conveying systems — wear plug method
NS-EN 12543-4:1999 Non-destructive testing — Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing — Part 4: Edge method
AENOR UNE-EN 12543-4:2000 Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 4: Edge method
NS-EN 12543-1:1999 Non-destructive testing — Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing — Part 1: Scanning method
DANSK DS/EN 12543-1:2001 Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 1: Scanning method
AENOR UNE-EN 12543-1:2000 Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 1: Scanning method
DANSK DS/EN 12543-4:1999 Non-destructive testing – Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing – Part 4: Edge method
SN-CEN/TR 15134:2005 Non-destructive testing — Automated ultrasonic examination — Selection and application of systems
DANSK DS/CEN/TR 15134:2005 Non-destructive testing - Automated ultrasonic examination - Selection and application of systems
AENOR UNE-CEN/TR 15134 IN:2011 Non-destructive testing - Automated ultrasonic examination - Selection and application of systems
DANSK DS/EN ISO 15548-3:2008 Non-destructive testing - Equipment for eddy current examination - Part 3: System characteristics and verification
DANSK DS/EN ISO 21546:2020 Paints and varnishes – Determination of the resistance to rubbing using a linear abrasion tester (crockmeter) (ISO 21546:2019)
SN-CEN/TR 14748:2004 Non-destructive testing — Methodology for qualification of non-destructive tests
DIN 4882:2023 Non-destructive testing - Electromagnetic test methods - Reference blocks for grinding burns testing
AENOR UNE-CEN/TR 14748 IN:2006 Non-destructive testing - Methodology for qualification of non-destructive tests
DANSK DS/CEN/TR 14748:2004 Non-destructive testing - Methodology for qualification of non-destructive tests
BS ISO 6370-2:1991 Vitreous and porcelain enamels. Determination of the resistance to abrasion-Loss in mass after sub-surface abrasion
AENOR UNE-EN ISO 15548-3:2009 Non-destructive testing - Equipment for eddy current examination - Part 3: System characteristics and verification (ISO 15548-3:2008)
DANSK DS/EN ISO 18490:2015 Non-destructive Testing - Evaluation of vision acuity of NDT personnel
NS-EN 12543-2:2021 Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 2: Pinhole camera radiographic method

VDI - Verein Deutscher Ingenieure

VDI 4473-2017 Abrasionsverschleisspruefstand fuer Komponenten von Schuettgutfoerderanlagen - Verschleisstopfverfahren

Society of Automotive Engineers (SAE)

SAE ARP1111-1969 Inspection of Worn Involute Splines
SAE ARP1111-1984 INSPECTION OF WORN INVOLUTE SPLINES
SAE ARP1111A-2020 Inspection of Worn Involute Splines
SAE ARP1536A-1978 Abrasion Test Procedure for Chafe Guard R(2001)
SAE AS6870-2020 Nondestructive Inspection Program Requirements for Aerospace Systems
SAE AS6870A-2023 Nondestructive Inspection Program Requirements for Aerospace Systems
SAE ARP5448/7-2010 Plain Bearing Wear Measurement
SAE J358-1980 NONDESTRUCTIVE TESTS

ANSI - American National Standards Institute

N15.20-1975 Guide to Calibrating Nondestructive Assay Systems (INMM)
N15.37-1981 Automation of Nondestructive Assay Systems for Nuclear Materials Control@ Guide to (INMM)

HU-MSZT

MNOSZ 1856-1950 ISA connection system. Operating and testing standard specification tolerances, foreseeable wear and safety belts
MSZ 18290/1-1981 Building stone, inspection of main parts of the top. Testing the degree of wear according to the Böhme test
MSZ 4310/8-1987 Non-destructive inspection of welded strips Continuous problem marking system Ultrasonic inspection

AGMA - American Gear Manufacturers Association

99FTM1-1999 Barkhausen Noise Inspection Method for Detecting Grinding Damage in Gears
05FTM09-2005 Hypoid Gear Lapping Wear Coefficient and Simulation

British Standards Institution (BSI)

PD ISO/TR 14569-1:2007 Dental materials. Guidance on testing of wear. Wear by toothbrushing
BS PD CEN/TR 15134:2005 Non-destructive testing — Automated ultrasonic examination — Selection and application of systems
BS ISO 12900:2018 Hard coal. Determination of abrasiveness
BS ISO 12900:2015 Hard coal. Determination of abrasiveness
BS ISO 6370-2:2011 Vitreous and porcelain enamels. Determination of the resistance to abrasion. Loss in mass after sub-surface abrasion
BS ISO 6370-2:2020 Vitreous and porcelain enamels. Determination of the resistance to abrasion. Loss in mass after sub-surface abrasion
BS EN ISO 6370-2:2021 Vitreous and porcelain enamels. Determination of the resistance to abrasion - Loss in mass after sub-surface abrasion

AENOR

UNE-CEN/TR 15134:2011 IN Non-destructive testing - Automated ultrasonic examination - Selection and application of systems
UNE-EN 12543-4:2000 NON-DESTRUCTIVE TESTING - CHARACTERISTICS OF FOCAL SPOTS IN INDUSTRIAL X-RAY SYSTEMS FOR USE IN NON-DESTRUCTIVE TESTING - PART 4: EDGE METHOD.
UNE-EN 12543-1:2000 NON-DESTRUCTIVE TESTING - CHARACTERISTICS OF FOCAL SPOTS IN INDUSTRIAL X-RAY SYSTEMS FOR USE IN NON-DESTRUCTIVE TESTING - PART 1: SCANNING METHOD.
UNE-CEN/TR 14748:2006 IN Non-destructive testing - Methodology for qualification of non-destructive tests

AT-ON

ONORM M 8125-1994 Tribotechnique - Testing of friction and wear - Model test: System ball-on-disc
ONORM M 3037-1994 Non-destructive testing - Measurement of coating thickness by electromagnetic methods -

International Organization for Standardization (ISO)

ISO 24647:2023 Non-destructive testing — Robotic ultrasonic test systems — General requirements
ISO/DIS 15548-3:2006 Non-destructive testing-Equipment for eddy current examination-Part 3:System characteristics and verification
ISO/TS 25107:2019 Non-destructive testing — NDT training syllabuses
ISO 12900:1997 Hard coal - Determination of abrasiveness
ISO 12900:2015 Hard coal - Determination of abrasiveness

Danish Standards Foundation

DS/CEN/TR 15134:2005 Non-destructive testing - Automated ultrasonic examination - Selection and application of systems
DS/EN ISO 15548-3:2008 Non-destructive testing - Equipment for eddy current examination - Part 3: System characteristics and verification
DS/EN 12543-1:2002 Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 1: Scanning method
DS/EN 12543-4:2000 Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 4: Edge method
DS/CEN/TR 14748:2004 Non-destructive testing - Methodology for qualification of non-destructive tests

Association Francaise de Normalisation

NF E23-014:1994 Gears. ISO system of terminology. Terminology for the appearance of gear teeth : wear and damages.
NF EN 4864:2020 Aerospace series - Environmental testing - High dynamic abrasion, scrape, scratch and punch test in interior cabin
NF EN ISO 8295:2004 Plastics - Film and sheet - Determination of friction coefficients
NF EN ISO 15548-3:2008 Non-destructive testing - Equipment for eddy current examination - Part 3: system characteristics and verifications
NF A06-223/IN1:2009 Method for the simulation of wear and corrosion for the detection of nickel release from coated items.
NF A06-223:2009 Method for the simulation of wear and corrosion for the detection of nickel release from coated items.
FD A09-025*FD CEN/TR 14748:2005 Non-destructive testing - Methodology for qualification of non-destructive tests
NF A06-223:1999 Method for the simulation of wear and corrosion for the detection of nickel release from coated items.
XP A09-011*XP CEN ISO/TS 25107:2020 Non-destructive testing - NDT training syllabuses
NF EN 13068-2:2000 Non-destructive testing - Fluoroscopy inspection - Part 2: checking the long-term stability of imaging systems
FD CEN/TR 14748:2005 Non-destructive testing - Methodology for the qualification of non-destructive testing methods
XP CEN ISO/TS 25108:2019 Non-destructive testing - END personnel training organizations

Japanese Industrial Standards Committee (JISC)

JIS Z 2316-4:2014 Non-destructive testing .Eddy current testing.Part 4: System characteristics and verification
JIS Z 2324-2:2020 Non-destructive testing -- Automatic inspection system for inner diameter surface of machining holes -- Part 2: Method of testing for performance characteristics of laser inspection system
JIS Z 2324-3:2020 Non-destructive testing -- Automatic inspection system for inner diameter surface of machining holes -- Part 3: Method of testing for performance characteristics of camera inspection system
JIS G 0431:2021 Steel products -- Employer's qualification system for non-destructive testing (NDT) personnel
JIS Z 2324-1:2018 Non-destructive testing -- Automatic inspection system for inner diameter surface of machining holes -- Part 1: Standard test blocks

YU-JUS

JUS C.A7.051-1997 Non-destruclive testing - Control ofproperties of ultrasonic test systems - Simple controls

German Institute for Standardization

DIN EN 12543-4:1999-12 Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 4: Edge method; German version EN 12543-4:1999
DIN 4882:2023-12 Non-destructive testing - Electromagnetic test methods - Reference blocks for grinding burns testing
DIN 4882:2023-06 Non-destructive testing - Electromagnetic test methods - Reference blocks for grinding burns testing / Note: Date of issue 2023-05-19*Intended as replacement for DIN SPEC 4882 (2016-11).
DIN EN 12543-1:1999-12 Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 1: Scanning method; German version EN 12543-1:1999
DIN EN ISO 21546:2021-02 Paints and varnishes - Determination of the resistance to rubbing using a linear abrasion tester (crockmeter) (ISO 21546:2019); German version EN ISO 21546:2020
DIN EN 12543-1:1999 Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 1: Scanning method; German version EN 12543-1:1999
DIN SPEC 4882:2016-11 Non-destructive testing - Electromagnetic test methods - Calibration blocks for grinding burns testing
DIN 13973-1:2008-03 Dental materials - Guidance on testing of wear - Part 1: Wear by toothbrushing (ISO/TR 14569-1:2007)
DIN EN 12543-4:1999 Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 4: Edge method; German version EN 12543-4:1999
DIN EN ISO 15548-3:2009-01 Non-destructive testing - Equipment for eddy current examination - Part 3: System characteristics and verification (ISO 15548-3:2008); German version EN ISO 15548-3:2008
DIN 54161:2021-03 Non-destructive testing - Qualification of non-destructive testing test assistants
DIN 51350-3:2010 Testing of lubricants - Testing in the four-ball tester - Part 3: Determination of wearing characteristics of liquid lubricants
DIN 51350-3:2015 Testing of lubricants - Testing in the four-ball tester - Part 3: Determination of wearing characteristics of liquid lubricants
DIN 53583:2007 Testing of pigments - Determination of fines content and of loss in mass by abrasion of pelletized carbon black pigments
DIN 54607:2014 Tissue paper and tissue products - Determination of dry colour abrasion of table decoration products - Abrasion test

PT-IPQ

NP 309-1962 ceramic tile. Wear test

Standard Association of Australia （SAA）

AS 2168.1:2009 Computerized Radiography System for Nondestructive Testing

IT-UNI

UNI 4727-1966 Statistical methods for quality inspection. Wear counting paper. p paper and b paper
UNI 7858-1978 Fabric testing. Wear measurement
UNI 7366-P3-1974 ISO system for deviations and connections. Inspection of smooth parts, calipers and joints assuming production deviation and wear, supersedes UNI 1149

Korean Agency for Technology and Standards (KATS)

KS P ISO TR 14569-1:2019 Dental materials — Guidance on testing of wear — Part 1: Wear by toothbrushing
KS B ISO 9712-2014(2019) Non-destructive testing — Qualification and certification of NDT personnel
KS B 6752-2013(2018) Nondestructive examination

CZ-CSN

CSN 63 1557-1985 Tyre testing. Tread depth measurement and tread wear indicator checking

American Society for Testing and Materials (ASTM)

ASTM G99-05 Standard Test Method for Wear Testing with a Pin-on-Disk Apparatus
ASTM G99-04a Standard Test Method for Wear Testing with a Pin-on-Disk Apparatus
ASTM G99-04 Standard Test Method for Wear Testing with a Pin-on-Disk Apparatus
ASTM G176-03(2009) Standard Test Method for Ranking Resistance of Plastics to Sliding Wear using Block-on-Ring Wear Test8212;Cumulative Wear Method
ASTM E3147-18 Standard Practice for Evaluating DICONDE Interoperability of Nondestructive Testing and Inspection Systems

Association of German Mechanical Engineers

DVS 0945-1-2006 Testing of welding wear-resistant cladding - abrasive wear

GSO

OS GSO ISO 15548-3:2013 Non-destructive testing -- Equipment for eddy current examination -- Part 3: System characteristics and verification
GSO ISO 15548-3:2013 Non-destructive testing -- Equipment for eddy current examination -- Part 3: System characteristics and verification
OS GSO ISO/TR 25107:2013 Non-destructive testing -- Guidelines for NDT training syllabuses

GM Europe

GME GMI L-6X01-5-1998 Camshaft Wear Test (English/German; Includes Appendix 1-18; ITDC Release, Draft for Harmonization)
GME L-1J03-3-1979 Seat Adjustment, Wear Test
GME GMI L-7B01B-11-1998 Wear Test Clutch Lining (English/German; Includes Appendix 1-3; ITDC Release, Draft for Harmonization)

KR-KS

KS P ISO TR 14569-1-2019 Dental materials — Guidance on testing of wear — Part 1: Wear by toothbrushing

SAE - SAE International

SAE ARP5448/7A-2016 Plain Bearing Wear Measurement

American Gear Manufacturers Association

AGMA 99FTM1-1999 Barkhausen Noise Inspection Method for Detecting Grinding Damage in Gears
AGMA 05FTM09-2005 Hypoid Gear Lapping Wear Coefficient and Simulation

PL-PKN

PN B12038-07-1987 Ceramic tiles Method for determination of resistance to deep abrasion Unglazed tiles

RO-ASRO

STAS SR 9160-1993 Solid wood parquet flooring Determination of wear

ES-AENOR

UNE 127-005 Pt.2-1990 cement brick. Wear resistance measurement

Lithuanian Standards Office

LST EN 12543-4-2001 Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 4: Edge method
LST EN 12543-1-2001 Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 1: Scanning method

GOSTR

GOST 34513-2018 System of non-destructive testing of products for railway transport. Basic principles

European Committee for Standardization (CEN)

PD CEN/TR 14748:2004 Non-destructive testing - Methodology for qualification of nondestructive tests
EN ISO 5470-1:1999 Rubber- or Plastics-Coated Fabrics - Determination of Abrasion Resistance - Part 1: Taber Abrader

SE-SIS

SIS 18 41 65-1965 Paints. Determination of resistance to dry abrasion
SIS 18 41 64-1965 Paints. Determination of resistance to wet abrasion
SIS 18 41 64-1973 Paints. Determination of resistance to wet abrasion
SIS 18 41 65-1973 Paints. Determination of resistance to dry abrasion

(U.S.) Ford Automotive Standards

FORD FLTM AY 103-1-2000 ATTRITION TEST FOR MOLECULAR SIEVE BEADS

GM Daewoo

GMKOREA EDS-T-2113-2011 Wear Test Clutch Lining

RU-GOST R

GOST 21708-1996 Solid mineral fuel. Method for determination of ash abrasiveness coefficient

DIN

DIN EN 12543-2:2021 Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 2: Pinhole camera radiographic method

IN-BIS

IS 10636 Pt.3-1983 Methods of measurement of abrasive wear properties of metallic materials Part 3 Low stress wear test methods
IS 10636 Pt.2-1983 Methods of measurement of abrasive wear properties of metallic materials Part 2 High stress wear test methods

U.S. Military Regulations and Norms

ARMY MIL-HDBK-728/1-1985 MILITARY HANDBOOK NONDESTRUCTIVE TESTING