Room temperature and high temperature conditions

Room temperature and high temperature conditions, Total:215 items.

The international standard classification for "Room temperature and high temperature conditions" includes: Rolling bearings , Chemical laboratories. Laboratory equipment , Greenhouses and other installations , Aircraft and space vehicles in general , Materials for aerospace construction in general , Adhesives , Temperature-measuring instruments , Environmental testing , Other iron and steel products , Radio receivers , Occupational safety. Industrial hygiene , Other valves , Protection against dangerous goods , Non-ferrous metals , Plants and equipment for the food industry , Heat treatment and coating .

The Chinese standard classification for "Room temperature and high temperature conditions" includes: Basic laboratory equipment , Material Protection , Welding and cutting equipment , Valve , Rolling bearing , Laboratory instrument and vacuum instrument in general , Farming and foresting machinery and tools , Farming machinery and tools , Composite materials and solid fuels , Nonmetallic materials used for aviation and aerospace , Basic standards and general methods , High temperature alloy , Industrial and educational television , Industrial physical hazard control , Marking, packaging, transport and storage in general , Technical management , Production environment safety and health facilities , Pipe fittings, clamps and seals , Ambient conditions , Cutters , Physical property analyzer , Other food processing machinery , Heat treatment .

Professional Standard - Machinery

JB/T 10458-2004 Specification of anti - oxidizing coatings at high - temperature for machineries
JB/T 11583-2013 High Temperature Furnace used for Testing Machines - Technical Specification
JB/T 5376-1991 Specification for Low Temperature Thermostat ?
JB/T 10286-2013 Specifications for Solar Greenhouse
JB/T 2850-2007 Rolling bearings - Parts made from Cr4Mo4V bearing steel elevated temperature - Specification for heat-treatment
JB/T 5377-1991 Specification for Thermostatic Water Bath
JB/T 8822-2013 Technical Condition of High Temperature Centrifugal Fan
JB/T 6232-1992 Thermostat for Electrodes. Technical Specifications
JB/T 2850-1993 Cr4MO4V high temperature bearing steel rolling bearing parts heat treatment technical conditions
JB/T 9518-1999 Specification of the oil bath under constant temperature
JB/T 8822-1998 High temperature centrifugal fan—Specification
JB/T 6865-1993 Pendulum type high and low temperature impact testing machine technical conditions
JB/T 11087-2011 Rolling bearings － Parts made from W-series steel elevated temperature－ Specifications for heat-treatment
JB/T 7749-1995 Technical specification for low temperature valves
JB/T 6655-1993 Technical Specification for High Temperature Spring
JB/T 10288-2013 Specifications for Multi-span Greenhouse

Professional Standard - Agriculture

NY/T 1365-2007 Greenhouse Rack and Pinion Screening Machine
NY/T 1823-2009 Specifications for hole disk type precise seeder of greenhouse vegetable
NY/T 610-2002 Technical specificatoin for solar energy greenhouse
SC/T 7002.2-1992 Environmental test conditions and methods for marine electronic equipment - high temperature
NY/T 1364-2007 Greenhouse Rack and Pinion Ventilating Window Machine

Shanghai Provincial Standard of the People's Republic of China

DB31/T 328-2004 Specification for plastic film greenhouse

Professional Standard - Aerospace

QJ 1280-1987 Technical Specification for RTV Silicon Rubber Glass Cloth
QJ 1245-1987 HYJ-4, HYJ-16, HYJ-42 room temperature curing epoxy adhesive technical conditions
QJ 975-1986 Technical Specification for MR-4 Refractory Sealing, Filling and Bonding Materials
QJ 1069-1986 Technical Specification for TR-2 High-temperature Putty
QJ 2141-1991 Technical conditions for superalloy forgings
QJ 1192-1987 Technical Specification for HTV Silicon Rubber Glass Cloth

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 10592-2023 Specifications for high/low temperature testing chambers
GB/T 25828-2010 General specification of superalloy bars
GB/T 10592-1989 Specification for low/high temperature test chambers
GB/T 28412-2012 General specification of superalloy investment cast airfoils
GB/T 934-1989 Methods for measuring meteorological conditions in the hot work environment
GB/T 25932-2010 General specification of superalloy master alloys for castings
GB/T 14998-1994 Heat-resisting superalloy blanks for forged rings
GB/T 11158-1989 Specification for high temperature test chambers
GB/T 25830-2010 General specification of superalloy disks and rings
GB/T 24925-2010 Cryogenic valve technical specifications
GB/T 10590-2006 Specifications for high and low temperature/low air pressure testing chambers
GB/T 28411-2012 General specification of superalloy investment structural castings
GB/T 10591-2006 Specifications for high temperature/low air pressure testing chambers
GB/T 10590-2006(英文版) Specifications for high and low temperature/low air pressure testing chambers
GB/T 934-2008 Methods for measuring meteorological conditions in the hot work environment
GB/T 28295-2012 General specification of superalloy tubes
GB/T 11158-2008 Specifications for high temperature test chambers
GB/T 42368-2023 Determination of explosion limits of combustible vapors and gases at elevated temperature and pressure
GB/T 10592-2008 Specification for low/high temperature test chambers
GB/T 25827-2010 General specification of superalloy plates and strips
GB/T 10591-1989 Specification for high temperature/low air pressure test chambers
GB/T 15414-1994 Generic specification for furnace high - Temperature television system
GB/T 25831-2010 General specification of superalloy wires

Guangdong Provincial Standard of the People's Republic of China

DB44/T 218-2005 Ordinary plastic greenhouse technical conditions

Beijing Provincial Standard of the People's Republic of China

DB11/T 550-2008 Technical specification for sunlight greenhouse electric mat roller
DB11/T 550-2018 Specifications for Electric Roller Shutters for Solar Greenhouses
DB11/T 292-2005 Technical specification for steel–framework of sunlight greenhouse

Liaoning Provincial Standard of the People's Republic of China

DB21/T 2305-2014 Greenhouse Conveyor Specifications
DB21/T 3126-2019 Technical regulations for high-quality production of greenhouse tomatoes

Military Standard of the People's Republic of China-General Armament Department

GJB 1087-1991 Room temperature curing high temperature inorganic adhesive

Professional Standard - Railway

TB/T 1998-1996 Technical conditions for ordering high temperature porcelain parts for locomotives

Group Standards of the People's Republic of China

T/QHNX 010-2021 Cultivation Technical Rules for Ginger in Plateau Greenhouse
T/LHFIA 006-2023 Food grade synthetic high temperature chain oil
T/CSAE 136-2020 Technical specification for threaded fasteners in high temperature automotive applications
T/NJ 1137-2019 Wheeled tractors for orchard & greenhouse-General requirement
T/QGCML 630-2023 Fully synthetic high temperature chain lubricant
T/CSTA 0053-2023 High temperature alloy wire rod for nuclear power springs
T/SSLX 0009-2023 High temperature chain oil
T/SVIA 015-2021 Technical Regulations for Harm Reduction of Greenhouse Cucumbers in High Temperature and Stamped Greenhouses
T/GDC 73-2020 Greenhouse constant temperature unit
T/SSEA 0330-2023 High temperature alloy wire rod for nuclear power springs

Hebei Provincial Standard of the People's Republic of China

DB13/T 17-1991 High-yield Cultivation Technical Regulations for Cucumber in Greenhouse
DB1307/T 362-2022 Grape solar greenhouse construction technical conditions
DB13/T 2766-2018 High temperature gas dry dust removal and waste heat recovery technical conditions
DB13/T 1829-2013 Environmental performance conditions and environmental test methods for solar greenhouses

Shaanxi Provincial Standard of the People's Republic of China

DB61/T 248-1997 Selection conditions for solar greenhouse vegetable production bases

Professional Standard - Electron

SJ 2326-1983 Generic specification for high and low temperature low pressure test chambers
SJ 2328-1983 Generic specification for high temperature test chambers

Professional Standard - Electricity

DL/T 669-1999 Classified standard of working in the outdoor hot environment
DL/T 531-2016 Specification for high-temperature and high-pressure globe valve and gate valve used in power plant
DL/T 531-1994 Technical specification of high temperature high pressure globe stop valves and gate valves for power station

机械电子工业部

JB 5376-1991 Low temperature constant temperature bath technical conditions

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence

GJB 1087A-2005 Specification for RT solidified inorganic adhesive for high temperature resistance

石家庄市市场监督管理局

DB1301/T 438-2022 Technical regulations for high temperature and stuffy greenhouses in solar greenhouses in summer

Taiwan Provincial Standard of the People's Republic of China

CNS 5434-1989 Method of Test for High and Low Temperature for Automobile Parts
CNS 7147-1994 Steel Castings for High Temperature and High Pressure Service
CNS 13957-1997 Method of test for tensile strength of fine ceramics at room and elevated temperature
CNS 7149-1994 Steel Castings for Low Temperature and High Pressure Service

Professional Standard - Aviation

HB 5830.8-1984 Airborne Equipment Environmental Conditions and Test Methods High Temperature
HB 5331-1985 Technical conditions of K17G nickel-based casting superalloy for aviation
HB 6880-1993 Specifications for quick-release clamps for connecting high-temperature conduits with sealing rings
HB 5830.17-1997 Environmental Conditions and Test Methods for Airborne Equipment - Temperature - Height
HB 6536-1991 Technical specification for high temperature quick release hoop for conduit connection
HB 3439-1984 Technical conditions for twist drill used for machining high temperature alloy and titanium alloy

Qinghai Provincial Standard of the People's Republic of China

DB63/T 1495-2016 Greenhouse insulation quilt

Ningxia Provincial Standard of the People's Republic of China

DB64/T 708-2011 Greenhouse insulation quilt

工业和信息化部

HG/T 5223-2017 Technical specifications for high temperature hard sealing and shutoff single gate valve
JC/T 2632-2021 Technical specifications of high temperature carburetor for carbon fiber production

煤炭工业部

MT 227-1990 Technical conditions of high-temperature combustion measuring instrument for total sulfur in coal

Shandong Provincial Standard of the People's Republic of China

DB37/T 2429-2013 Technical conditions for safe operation of roller blinds in solar greenhouses
DB37/T 2422-2013 General technical requirements for complete sets of equipment for medium-temperature and high-efficiency biogas projects

Professional Standard - Coal

MT/T 227-2005 General specifications for determinator of sulfur by high temperature combustion neutralization method

未注明发布机构

DIN EN 10217-3 E:2009-10 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 3: Electric welded and submerged arc welded alloy fine grain steel tubes with specified room, elevated and low temperature properties
DIN EN 10217-3 E:2014-10 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 3: Electric welded and submerged arc welded alloy fine grain steel tubes with specified room, elevated and low temperature properties
DIN EN 10213-2:1996 Technical delivery conditions for cast steel for pressure vessels a Part 2: Types of steel for use at room temperature and elevated temperatures

Professional Standard - Business

SB/T 10183-1993 Thermal insulation roller bed technical conditions
SB/T 10183-2012 Technical specifications for heat preservation batch roller

Professional Standard - Aquaculture

SC/T 7002.2-1991 Environmental test conditions and methods for marine electronic equipment

国家能源局

NB/T 42164-2018 PG series high-temperature canned motors (containig pump content)- Specification

Professional Standard - Aviation Industry

Q/HBm 109-1994 High temperature and low temperature test methods for auto parts

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 24925-2019 Low temperature valve—Technical specifications
GB/T 39192-2020 Heat treatment of superalloy parts

农业农村部

SC/T 7002.2-2016 Fishery electronic equipment environmental test and methods- Dry heat

Professional Standard - Ferrous Metallurgy

YB/T 5352-2006 Heat-resisting superalloy blanks for forged rings

SCC

UNE-EN 10213-2:1996 TECHNICAL DELIVERY CONDITIONS FOR STEEL CASTINGS FOR PRESSURE PURPOSES. Part 2: Steel grades for use at room temperature and elevated temperatures.
DANSK DS/EN 10213-2:1996 Technical delivery conditions for steel castings for pressure purposes - Part 2: Steel grades for use at room temperature and elevated temperatures
NS-EN 10213-2:1995 Technical delivery conditions for steel castings for pressure purposes - Part 2: Steel grades for use at room temperature and elevated temperatures
BS 1821:1952 Specification for oxy-acetylene welding of high temperature and high pressure pipelines
HOLDEN HN 1656-1982 Exterior Colour Lacquer - High Bake
NS-EN 10217-3:2019 Welded steel tubes for pressure purposes — Technical delivery conditions — Part 3: Electric welded and submerged arc welded alloy fine grain steel tubes with specified room, elevated and low temperature properties
DANSK DS/EN 10217-3:2019 Welded steel tubes for pressure purposes – Technical delivery conditions – Part 3: Electric welded and submerged arc welded alloy fine grain steel tubes with specified room, elevated and low temperature properties
DIN EN 10217-3 E:2014 Draft Document - Welded steel tubes for pressure purposes - Technical delivery conditions - Part 3: Electric welded and submerged arc welded alloy fine grain steel tubes with specified room, elevated and low temperature properties; German version prEN ...
NS 564:1944 Greenhouse — Doors
BS 5445-8:1984 Components of automatic fire detection systems-Specification for high temperature heat detectors
BS EN 13031-1:2001 Greenhouses. Design and construction-Commercial production greenhouses

European Committee for Standardization (CEN)

EN 10213-2:1995 Technical Delivery Conditions for Steel Castings for Pressure Purposes - Part 2: Steel Grades for Use at Room Temperature and Elevated Temperatures

TR-TSE

TS 3149-1978 Steels For Bolts And Screws For Service At Elevated And High Temperatures

HU-MSZT

MNOSZ 13952-1953 Laboratory thermometer, high temperature chemical thermometer
MSZ 7453-1959 Testing of plastics based on their resistance to pull and pressure at temperatures significantly different from room temperature
MSZ 3598-1957 hotbed or greenhouse meadow
MSZ 3595-1957 hotbed or greenhouse cauliflower
MSZ 3596-1957 hotbed or greenhouse tomatoes
MSZ 3594-1957 Hotbed or greenhouse kohlrabi

British Standards Institution (BSI)

BS A 317:1997 Nuts, hexagonal, plain, normal height, normal across flats, with MJ threads, classifications - 600 MPa (at ambient temperature)/120 °C, 600 MPa (at ambient temperature)/235 °C, 900 MPa (at ambient temperature)/425 °C, 1100 MPa (at ambient temperature)/235
BS ISO 18549-2:2009 Metallic powders - Determination of apparent density and flow rate at elevated temperatures - Determination of flow rate at elevated temperatures
BS ISO 8279:2008 Aerospace - Nuts, hexagonal, plain, normal height, normal across flats, with MJ threads, classifications: 600 MPa (at ambient temperature)/120 °C, 600 MPa (at ambient temperature)/235 °C, 900 MPa (at ambient temperature)/425 °C, 1100 MPa (at ambient tempe
BS A 315:1997 Aerospace - Nuts, hexagonal, slotted (castellated), reduced height, normal across flats, with MJ threads, classifications: 450 MPa (at ambient temperature)/120 °C, 450 MPa (at ambient temperature)/235 °C, 600 MPa (at ambient temperature)/425 °C, 900 MPa (
BS A 314:1997 Aerospace - Nuts, hexagonal, plain, reduced height, normal across flats, with MJ threads, classifications: 450 MPa (at ambient temperature)/120 °C, 450 MPa (at ambient temperature)/235 °C, 600 MPa (at ambient temperature)/425 °C, 900 MPa (at ambient tempe
BS ISO 9609:2016 Aerospace - Nuts, hexagonal, plain, reduced height, normal across flats, with MJ threads, classifications: 450 MPa (at ambient temperature) /120 degrees C, 450 MPa (at ambient temperature) /235 degrees C, 600 MPa (at ambient temperature) /425 degrees C, 9
BS EN 10217-3:2019 Welded steel tubes for pressure purposes. Technical delivery conditions - Electric welded and submerged arc welded alloy fine grain steel tubes with specified room, elevated and low temperature properties
BS EN ISO 21028-1:2016 Cryogenic vessels. Toughness requirements for materials at cryogenic temperature. Temperatures below -80 C
BS 903-A6:1992 Physical testing of rubber - Method for determination of compression set at ambient, elevated or low temperatures

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc.

ASHRAE SF-98-3-1-1998 Greenhouse Window U-Factors under Field Conditions
ASHRAE DA-07-046-2007 Monitored Indoor Moisture and Temperature Conditions in Humid-Climate US Residences

International Organization for Standardization (ISO)

ISO 4147:1997 Aerospace - Nuts, hexagonal, slotted (castellated), normal height, normal across flats, with MJ threads, classifications: 600 MPa (at ambient temperature)/120 °C, 600 MPa (at ambient temperature)/235 °C, 900 MPa (at ambient temperature)/425 °C, 1100 MPa (
ISO 8279:2008 Aerospace - Nuts, hexagonal, plain, normal height, normal across flats, with MJ threads, classifications: 600 MPa (at ambient temperature)/120 °C, 600 MPa (at ambient temperature)/235 °C, 900 MPa (at ambient temperature)/425 °C, 1100 MPa (at ambient tempe
ISO 9157:2002 Aerospace - Nuts, spline-drive, self-locking, with MJ threads, classifications: 1100 MPa (at ambient temperature)/425°C, 1100 MPa (at ambient temperature)/650°C, 1210 MPa (at ambient temperature)/425°C, 1210 MPa (at ambient temperature)/730°C, 1550 MPa (a
ISO 14610:2012 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for flexural strength of porous ceramics at room temperature
ISO 9328-2:1991 Steel plates and strips for pressure purposes; technical delivery conditions; part 2: unalloyed and low-alloyed steels with specified room temperature and elevated temperature properties

Association Francaise de Normalisation

NF A32-055-2:1996 Technical delivery conditions for steel castings for pressure purposes. Part 2 : steel grades for use at room temperature and elevated temperatures.
NF X15-016:1981 ENCLOSURES WITH AUTOMATIC TEMPERATURE AND HUMIDITY CONTROL.

RU-GOST R

GOST 9454-1978 Metals. Method for testing the impact strength at low, room and high temperature
GOST 33519-2015 Polymer composites. Test method for compression at normal, low and high temperatures
GOST 22442-1977 Refractory articles for stabilizing gas burner chambers. Specifications
GOST 8335-1981 Visual disappearing filament micro-pyrometers. General specifications
GOST 8335-1996 Visual disappearing filament pyrometers. General specifications
GOST 12.4.050-1978 Safety felt shoes for protection against high temperatures. Specifications
GOST 5040-1996 Lightweight heatinsulating refractory and high-refractory products. Specifications
GOST 5381-1972 High refractory chrome-magnesite (chrome-periclase) products. Specifications
GOST R ISO 1146-2009 Pyrometric reference cones for laboratory use. Specifications
GOST 23178-1978 High-temperature fluoroborate and boride halogenide fluxes for soldering. Specifications
GOST 5381-1993 High refractory chromepericlase products. Specifications

Standard Association of Australia （SAA）

AS 1391:2007 Metallic materials - Tensile testing at ambient temperature
AS 2291:2007 Metallic materials - Tensile testing at elevated temperatures

Indonesia Standards

SNI 06-0243-1989 Test method of enamel resistance to weak acid at room temperature

GM North America

GM 9985449-1989 Coating, High Temperature Resistant (Rule 66)

GB-REG

REG 36 CFR PART 21-2011 HOT SPRINGS NATIONAL PARK; BATHHOUSE REGULATIONS

German Institute for Standardization

DIN EN 1626:2009 Cryogenic vessels - Valves for cryogenic service; English version of DIN EN 1626:2009-01
DIN EN 1626:1999 Cryogenic vessels - Valves for cryogenic service; German version EN 1626:1999
DIN EN 2583:1997 Aerospace series - Bolts, MJ threads, in heat resisting nickel base alloy, NI-PH2601 (Inconel 718); classification: 1275 MPa (at ambient temperature)/650 °C; technical specification; German version EN 2583:1997
DIN EN 10217-3:2019-08 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 3: Electric welded and submerged arc welded alloy fine grain steel tubes with specified room, elevated and low temperature properties; German version EN 10217-3:2019
DIN EN 10217-3:2019 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 3: Electric welded and submerged arc welded alloy fine grain steel tubes with specified room, elevated and low temperature properties

American Society for Testing and Materials (ASTM)

ASTM A234/A234M-10 Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service
ASTM A234/A234M-03 Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service
ASTM D3709-89(1999) Standard Test Method for Stability of Water-in-Oil Emulsions Under Low to Ambient Temperature Cycling Conditions
ASTM A234/A234M-10a Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service
ASTM A234/A234M-07 Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service
ASTM C1862-17 Standard Test Method for the Nominal Joint Strength of End-Plug Joints in Advanced Ceramic Tubes at Ambient and Elevated Temperatures
ASTM A234/A234M-10b Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service
ASTM D3709-89(2005)e1 Standard Test Method for Stability of Water-in-Oil Emulsions Under Low to Ambient Temperature Cycling Conditions
ASTM D370-84(1995)e1 Standard Test Method for Dehydration of Oil-Type Preservatives
ASTM D3709-89(2010) Standard Test Method for Stability of Water-in-Oil Emulsions Under Low to Ambient Temperature Cycling Conditions
ASTM A319-71(2015) Standard Specification for Gray Iron Castings for Elevated Temperatures for Non-Pressure Containing Parts
ASTM G142-98 Standard Test Method for Determination of Susceptibility of Metals to Embrittlement in Hydrogen Containing Environments at High Pressure, High Temperature, or Both
ASTM G142-98(2011) Standard Test Method for Determination of Susceptibility of Metals to Embrittlement in Hydrogen Containing Environments at High Pressure, High Temperature, or Both
ASTM G142-98(2004) Standard Test Method for Determination of Susceptibility of Metals to Embrittlement in Hydrogen Containing Environments at High Pressure, High Temperature, or Both
ASTM A194/A194M-14a Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both
ASTM A319-71(2011) Standard Specification for Gray Iron Castings for Elevated Temperatures for Non-Pressure Containing Parts

Korean Agency for Technology and Standards (KATS)

KS D 4107-2013 Steel castings for high temperature and high pressure service
KS D 4107-2007 Steel castings for high temperature and high pressure service
KS D 4111-1995(2010) Steel castings for low temperature and high pressure service
KS D ISO 9328-2-2003(2013) Steel plates and strips for pressure purposes－Technical delivery conditions－Part 2：Unalloyed and low-alloyed steels with specificed room temperature and elevated temperature properties
KS R 0016-1971 Method of high and low temperature test for automobile parts
KS D 4111-2013 Steel castings for low temperature and high pressure service
KS D ISO 9328-2-2014 Steel plates and strips for pressure purposes－Technical delivery conditions－Part 2：Unalloyed and low-alloyed steels with specificed room temperature and elevated temperature properties
KS D ISO 9328-2:2003 Steel plates and strips for pressure purposes-Technical delivery conditions-Part 2:Unalloyed and low-alloyed steels with specificed room temperature and elevated temperature properties
KS L ISO 1146-2023 Pyrometric reference cones for laboratory use ? Specification

IT-UNI

EC 1-2021 UNI EN 10217-3-2021 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 3: Electric welded and submerged arc welded alloy fine grain steel tubes with specified room, elevated and low temperature properties

PL-PKN

PN-EN 10217-3-2019-06 P Welded steel tubes for pressure purposes -- Technical delivery conditions -- Part 3: Electric welded and submerged arc welded alloy fine grain steel tubes with specified room, elevated and low temperature properties

ZA-SANS

SANS 10815:2003 Rubber, vulcanized or thermoplastic - Determination of compression set at ambient, elevated or low temperatures

KR-KS

KS L ISO 1146-2013(2023) Pyrometric reference cones for laboratory use?Specification

ES-UNE

UNE-EN 10217-3:2019 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 3: Electric welded and submerged arc welded alloy fine grain steel tubes with specified room, elevated and low temperature properties

Japanese Industrial Standards Committee (JISC)

JIS R 1606:1995 Testing methods for tensile strength of fine ceramics at room and elevated temperature
JIS G 5151:1991 Steel castings for high temperature and high pressure service