Level 2

Level 2, Total:172 items.

The international standard classification for "Level 2" includes: Products in fibre-reinforced cement , Concrete and concrete products , Cables , Measurement of fluid flow in general , Magnetic components , Chemical analysis , Water supply systems , Waterproofing , Washers and other locking elements , Extraction and processing of petroleum and natural gas .

The Chinese standard classification for "Level 2" includes: Cement composite material and additives , Concrete product , Cable and its accessory , Basic standards and general method , Magnetic component , Basic standards and general methods for water treatment agent , Flow capacity and material level instrument , Roof and pavement waterproof and barrier material , Slotting, broaching, planing and sawing machines , Fasteners , Petroleum extraction , Length Measurement .

Professional Standard - Building Materials

JC/T 412.2-2018 Fiber cement flat sheets. Part 2: Asbetos fiber cement flat sheets
JC/T 412.2-2006 Fiber cement flat sheets Part 2: Asbestos Fiber cement flat sheets
JC/T 412.1-2006 Fiber cement flat sheets Part 1: Non-Asbestos Fiber cement flat sheets
JC/T 412.1-2018 Fiber cement flat sheets-Part 1:Non-asbetos fiber cement flat sheets

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 36536-2018 Test method of water balance in cement production enterprises
GB/T 12666.2-2008 Test method on a single wire or cable under fire conditions - Part 2: Horizontal specimen flame test
GB/T 42031-2022 Drawing method of water balance diagram for water-use organization
GB/T 328.7-2007 Test methods for building sheets for waterproofing—Part 7:Plastic and rubber sheets for waterproofing-length width straightness and flatness
GB/T 14643.2-2009 Examination of bacteria and algae in industrial circulating cooling water - Part 2: Examination of soil micro-bioti - Standard of plate count
GB/T 28869.2-2023 Cores made of soft magnetic materials—Measuring methods—Part 2: Magnetic properties at low excitation level
GB/T 778.2-2018 Meters for cold potable water and hot water—Part 2:Test methods

Group Standards of the People's Republic of China

T/CFA 020102029-2023 Ductile iron pipes for trenchless construction— part 2 : used for horizontal directional drilling method

Taiwan Provincial Standard of the People's Republic of China

CNS 13119-2000 Method of test for coefficient of static friction of paper and paperboard(Inclined plane method and horizontal plane method)
CNS 11680-1986 Method of Test for Horizontal Load of Furniture
CNS 5653-1980 Method of Test for Level Gauge
CNS 474-1988 Method of Test for Flat Asbestos Cement Sheet

Professional Standard - Chemical Industry

HG/T 21522-2005（编制说明） Horizontal hanging cover plate type flat welding flange manhole
HG/T 21522-2005 Level of the hanging cover plate welded flange manhole
HG 21523-1995 Horizontal hanging cover with neck flat welding flange manhole
HG/T 21523-2014 Slip on flange manholes with davit to horizontal cover
HG/T 21523-2005 The level hanging cover with neck flat welding flange manhole
HG/T 21523-2005（编制说明） Horizontal hanging cover with neck flat welding flange manhole
HG 21522-1995 Horizontal hanging cover plate type flat welding flange manhole
HG/T 21522-2014 Plate flange manholes with davit to horizontal cover

Tianjin Provincial Standard of the People's Republic of China

DB12/T 442-2011 Water Balance Test Method

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence

GJB 6477-2008 Test method of large caliber DAVIS gun experiment. Horizontal launch

Professional Standard - Machinery

JB/T 5758.2-2008 Traverse head shaping machines—Part 2:Specifications
JB/T 585-1979 Horizontal ceiling butt welding flange entry hole

农业农村部

NY/T 3489-2019 The evaluation for the level of agricultural mechanization—Part 2:tockbreeding

未注明发布机构

DIN EN ISO 21528-2 E:2014-08 Horizontal methods for detection and enumeration of Enterobacteriaceae in food chain microbiology Part 2: Colony counting method (draft)
DIN EN ISO 19085-2 E:2014-11 Woodworking Machinery Safety Part 2: Horizontal Beam and Plate Circular Saws (Draft)

Professional Standard - Aerospace

QJ 3147.2-2002 Flat Washers - Part2: Plain Flat Washers

Zhejiang Provincial Standard of the People's Republic of China

DB3304/T 046.2-2020 Technical Specifications for Rice and Fishery Comprehensive Planting and Breeding in Plain Water Country Part 2: Rice Soft-shelled Turtle

Professional Standard - Petroleum

SY 6846-2012 Completion Method of Upper Cementing and Lower Screen Tube in Horizontal Wells
SY/T 6846-2012 Horizontal well completion technology with stage cementing

National Metrological Verification Regulations of the People's Republic of China

JJG 103-2005 Verification Regulation of Electronic Levels and Coincidence Levels

IX-ECMA

ECMA TR 27-1995 Method for the prediction of installation noise levels (Second Edition)

Korean Agency for Technology and Standards (KATS)

KS C IEC 61580-2-2020 Methods of measurement for waveguides－Part 2：Level of intermodulation products
KS C IEC 62044-2-2023 Cores made of soft magnetic materials — Measuring methods — Part 2: Magnetic properties at low excitation level
KS K 0478-1980 Test method for snarl index of cotton yarn:Horizontal method
KS K 0478-2010 Test method for snarl index of cotton yarn:Horizontal method
KS C IEC 62044-2:2018 Cores made of soft magnetic materials — Measuring methods — Part 2: Magnetic properties at low excitation level
KS A 0603-2005 METHODS OF MEASUREMENT FOR VIBRATION LEVEL
KS C IEC 61580-2:2005 Methods of measurement for waveguides－Part 2：Level of intermodulation products
KS K 0583-2011 Test method for flame resistance of cloth：Horizontal method
KS K 0583-2016 Test method for flame resistance of cloth：Horizontal method
KS K 0583-2022 Test method for flame resistance of cloth: Horizontal method
KS K 0583-2016(2021) Test method for flame resistance of cloth：Horizontal method
KS K 0583-1985 Test method for flame resistance of cloth: Horizontal method
KS M 2954-2007(2022) Test methods of water-soluble flux for horizontal soldering
KS A 0603-1988(2003) METHODS OF MEASUREMENT FOR VIBRATION LEVEL
KS L 0006-2022 Heat balance method of cement rotary kiln
KS B 5547-1993 Levels
KS B 5547-1993(2018) Levels
KS K 0582-1980 Test method for burning rate of cloth: Horizontal method
KS K 0582-2011 Test method for burning rate of cloth:Horizontal method
KS K 0582-2021 Test method for burning rate of cloth: Horizontal method

ES-UNE

UNE-EN 61580-2:1996 METHODS OF MEASUREMENT FOR WAVEGUIDES. PART 2: LEVEL OF INTERMOFULATION PRODUCTS. (Endorsed by AENOR in December of 1996.)
UNE-EN 62044-2:2005/AC:2021-06 Cores made of soft magnetic materials - Measuring methods - Part 2: Magnetic properties at low excitation level (Endorsed by Asociación Española de Normalización in July of 2021.)
UNE-ISO 7619-1:2011 ERRATUM:2011 Road signalisation equipment. Horizontal signalisation. Application machines. Part 2: Test methods.
UNE-EN 62044-2:2005 Cores made of soft magnetic materials - Measuring methods -- Part 2: Magnetic properties at low excitation level (Endorsed by AENOR in September of 2005.)
UNE-EN ISO 19085-2:2022 Woodworking machines - Safety - Part 2: Horizontal beam panel circular sawing machines (ISO 19085-2:2021)
UNE-EN ISO 4064-2:2018/A11:2023 Water meters for cold potable water and hot water - Part 2: Test methods (ISO 4064-2:2014)

Association Francaise de Normalisation

NF EN 61580-2:2002 Measurement methods applied to waveguides - Part 2: level of intermodulation products
NF EN 62044-2:2005 Cores of soft magnetic materials - Measurement methods - Part 2: magnetic properties at low excitation level
NF E64-600-2:2018 Woodworking machines - Safety - Part 2 : horizontal beam panel circular sawing machines
NF E64-600-2*NF EN ISO 19085-2:2021 Woodworking machines - Safety - Part 2 : horizontal beam panel circular sawing machines
XP C93-923-2-2:2021 Enclosures for optical connection points - Part 2-2: outdoor use - In rooms or at ground level
NF ISO 17208-2:2020 Underwater acoustics - Quantities and methods of description and measurement of underwater acoustics of ships - Part 2: determination of source levels from deep sea measurements
NF EN ISO 19085-2:2021 Machines à bois - Sécurité - Partie 2 : scies circulaires à panneaux horizontales à presseur
NF EN 3844-2:2019 Aerospace series - Flammability of non-metallic materials - Part 2: burner test, horizontal - Determination of horizontal flame propagation
NF E17-002-2*NF EN ISO 4064-2:2017 Water meters for cold potable water and hot water - Part 2: test methods

NATO - North Atlantic Treaty Organization

STANAG 6001-2003 Language Proficiency Levels (ED 2)

International Organization for Standardization (ISO)

ISO/TS 19046-2:2017 Cheese — Determination of propionic acid level by chromatography — Part 2: Method by ion exchange chromatography
ISO 396-2:1980 Products in fibre reinforced cement; Part 2 : Silica-asbestos-cement flat sheets
ISO 9125:1990/Cor 2:2005 Fibre-cement slates and fittings; Technical Corrigendum 2
ISO 19085-2:2021 Woodworking machines — Safety — Part 2: Horizontal beam panel circular sawing machines
ISO 19085-2:2017 Woodworking machines - Safety - Part 2: Horizontal beam panel circular sawing machines
ISO 21528-2:2017 Microbiology of the food chain - Horizontal method for the detection and enumeration of Enterobacteriaceae - Part 2: Colony-count technique
ISO 14694:2003/CD Amd 2 Industrial fans-Specifications for balance quality and vibration levels-Amendment 2
ISO/IEC 19086-2:2018 Cloud computing — Service level agreement (SLA) framework — Part 2: Metric model
ISO/DIS 4064-2:2023 Water meters for cold potable water and hot water — Part 2: Test methods

AENOR

UNE 135277-2:2011 Road signalisation equipment. Horizontal signalisation. Application machines. Part 2: Test methods.
UNE-EN ISO 4064-2:2015 Water meters for cold potable water and hot water - Part 2: Test methods (ISO 4064-2:2014)

U.S. Air Force

AIR FORCE MIL-I-26689C-1981 INDICATOR, HORIZONTAL SITUATION, AQU-2/A
AIR FORCE MIL-I-26689 C NOTICE 1-1996 INDICATOR, HORIZONTAL SITUATION, AQU-2/A
AIR FORCE MIL-I-26689 C (2)-1994 INDICATOR, HORIZONTAL SITUATION, AQU-2/A
AIR FORCE MIL-I-26689 C-1981 INDICATOR, HORIZONTAL SITUATION, AQU-2/A

SCC

06/30145217 DC EN 671-2. Fixed firefighting systems. Hose systems. Part 2. Hose system with lay-flat hose
DANSK DS/EN 62044-2/AC:2005 Cores made of soft magnetic materials - Measuring methods - Part 2: Magnetic properties at low excitation level
CEI EN 62044-2/AC:2005 Cores made of soft magnetic materials - Measuring methods Part 2: Magnetic properties at low excitation level
MIL MIL-DTL-3922/57D-2013 Flanges, Waveguide (Cover) (Round, 8 Hole) (2 Holes Centered Horizontally, 2 Holes Centers Vertically)
MIL MIL-DTL-3922/57C-2008 Flanges, Waveguide (Cover) (Round, 8 Hole) (2 Holes Centered Horizontally, 2 Holes Centers Vertically)
DANSK DS/EN ISO 4833-2:2013 Microbiology of the food chain - Horizontal method for the enumeration of microorganisms - Part 2: Colony count at 30 degrees C by the surface plating technique
DANSK DS/EN ISO 19085-2:2017 Woodworking machines – Safety – Part 2: Horizontal beam panel circular sawing machines (ISO 19085-2:2017)
IEC 61156-2-1:1995/AMD2:2001 Amendment 2 - Part 2:Horizontal floor wiring. Section 1:Blank detail specification
NS-EN ISO 19085-2:2021 Woodworking machines – Safety – Part 2: Horizontal beam panel circular sawing machines (ISO 19085-2:2021)
DANSK DS/ISO 19085-2:2021 Woodworking machines – Safety – Part 2: Horizontal beam panel circular sawing machines
MIL MIL-DTL-3922/62E-2019 Flanges, Waveguide (Choke) (Round, 8 Hole (2 Holes Centered Horizontally, 2 Holes Centered Vertically))
MIL MIL-DTL-3922/62D-2010 Flanges, Waveguide (Choke) (Round, 8 Hole (2 Holes Centered Horizontally, 2 Holes Centered Vertically))
CEI EN 62044-2:2005 Cores made of soft magnetic materials - Measuring methods Part 2: Magnetic properties at low excitation level
DANSK DS/EN 62044-2:2005 Cores made of soft magnetic materials - Measuring methods - Part 2: Magnetic properties at low excitation level
NS-EN ISO 4064-2:2014 Water meters for cold potable water and hot water — Part 2: Test methods (ISO 4064-2:2014)
NS-EN ISO 4064-2:2017 Water meters for cold potable water and hot water - Part 2: Test methods (ISO 4064-2:2014)
AENOR UNE 135200-2:2002 Street sign equipment. Horizontal signage. Part 2: Materials. Laboratory tests.
06/30151270 DC BS ISO 21527-2. Horizontal method for the enumeration of yeasts and moulds. Colony-count technique. Part 2. Products with a water activity less than or equal to 0,95
DIN EN ISO 21528-2 E:2014 Draft Document - Microbiology of the food chain - Horizontal methods for the detection and enumeration of Enterobacteriaceae - Part 2: Colony-count method (ISO/DIS 21528-2:2014); German version prEN ISO 21528-2:2014
DANSK DS/EN ISO 4064-2:2017 Water meters for cold potable water and hot water – Part 2: Test methods (ISO 4064-2:2014)
07/30164098 DC BS ISO 29582-2. Methods of testing cement. Determination of the heat of hydration. Part 2. Semi-adiabatic method
NS-EN ISO 4833-2:2013 Microbiology of the food chain - Horizontal method for the enumeration of microorganisms - Part 2: Colony count at 30 degrees C by the surface plating technique (ISO 4833-2:2013)
CEI UNI EN/ISO 4064-2:2015 Water meters for cold potable water and hot water Part 2: Test methods

Japanese Industrial Standards Committee (JISC)

JIS B 7610-2:2000 Pressure balances -- Part 2: Test methods
JIS K 2265-2:2007 Determination of flash point -- Part 2: Rapid equilibrium closed cup method

Indonesia Standards

SNI 06-6989.11-2004 Water and wastewater - Part 11: Test methods of acidity levels (pH) by pH meters
SNI 19-6988-2004 Vertical control nets by levelling methods

German Institute for Standardization

DIN EN 62044-2:2006-01 Cores made of soft magnetic materials - Measuring methods - Part 2: Magnetic properties at low excitation level (IEC 62044-2:2005); German version EN 62044-2:2005
DIN EN 14153-2:2004 Recreational diving services - Safety related minimum requirements for the training of recreational scuba divers - Part 2: Level 2 - Autonomous diver; German version EN 14153-2:2003
DIN EN ISO 19085-2:2018 Woodworking machines - Safety - Part 2: Horizontal beam panel circular sawing machines (ISO 19085-2:2017)
DIN EN ISO 19085-2:2022-05 Woodworking machines - Safety - Part 2: Horizontal beam panel circular sawing machines (ISO 19085-2:2021); German version EN ISO 19085-2:2021
DIN EN 62044-2:2006 Cores made of soft magnetic materials - Measuring methods - Part 2: Magnetic properties at low excitation level (IEC 62044-2:2005); German version EN 62044-2:2005
DIN EN 62044-2 Berichtigung 1:2021-09 Cores made of soft magnetic materials - Measuring methods - Part 2: Magnetic properties at low excitation level (IEC 62044-2:2005/COR1:2021); German version EN 62044-2:2005/AC:2021-06
DIN EN 1848-2:2001 Flexible sheets for waterproofing - Determination of length, width, straightness and flatness - Part 2: Plastic and rubber sheets for roof waterproofing; German version EN 1848-2:2001
DIN EN ISO 19085-2:2020 Woodworking machines - Safety - Part 2: Horizontal beam panel circular sawing machines (ISO/DIS 19085-2:2020); German and English version prEN ISO 19085-2:2020
DIN EN ISO 4064-2:2017 Water meters for cold potable water and hot water - Part 2: Test methods (ISO 4064-2:2014)
DIN EN ISO 4064-2/A11:2023 Water meters for cold potable water and hot water - Part 2: Test methods (ISO 4064-2:2014)
DIN ISO 21528-2:2009 Microbiology of food and animal feeding stuffs - Horizontal methods for the detection and enumeration of Enterobacteriaceae - Part 2: Colony-count method (ISO 21528-2:2004)
DIN EN ISO 21528-2:2017 Microbiology of the food chain - Horizontal method for the detection and enumeration of Enterobacteriaceae - Part 2: Colony-count technique (ISO 21528-2:2017); German version EN ISO 21528-2:2017
DIN EN ISO 4064-2/A11:2023-02 Water meters for cold potable water and hot water - Part 2: Test methods (ISO 4064-2:2014); German version EN ISO 4064-2:2017/A11:2022
DIN EN ISO 4064-2:2023 Water meters for cold potable water and hot water - Part 2: Test methods (ISO/DIS 4064-2:2023); German and English version prEN ISO 4064-2:2023

GSO

OS GSO IEC 62044-2:2014 Cores made of soft magnetic materials - Measuring methods - Part 2: Magnetic properties at low excitation level
GSO IEC 62044-2:2014 Cores made of soft magnetic materials - Measuring methods - Part 2: Magnetic properties at low excitation level
OS GSO ISO 4833-2:2016 Microbiology of the food chain -- Horizontal method for the enumeration of microorganisms -- Part 2: Colony count at 30 degrees C by the surface plating technique
GSO ISO 4833-2:2016 Microbiology of the food chain -- Horizontal method for the enumeration of microorganisms -- Part 2: Colony count at 30 degrees C by the surface plating technique
BH GSO ISO 4833-2:2017 Microbiology of the food chain -- Horizontal method for the enumeration of microorganisms -- Part 2: Colony count at 30 degrees C by the surface plating technique
GSO ISO 16122-2:2015 Agricultural and forestry machinery -- Inspection of sprayers in use -- Part 2: Horizontal boom sprayers
OS GSO ISO 4064-2:2017 WATER METERS FOR COLD POTABLE WATER AND HOT WATER -- PART 2: TEST METHODS

British Standards Institution (BSI)

BS EN 62044-2:2005(2021) Cores made of soft magnetic materials — Measuring methods Part 2 : Magnetic properties at low excitation level
23/30452565 DC BS EN ISO 4064-2. Water meters for cold potable water and hot water - Part 2. Test methods

Defense Logistics Agency

DLA MIL-DTL-3922/62 D-2010 FLANGES, WAVEGUIDE (CHOKE) (ROUND, 8 HOLE (2 HOLES CENTERED HORIZONTALLY, 2 HOLES CENTERED VERTICALLY))
DLA MIL-DTL-3922/57 C-2008 FLANGES, WAVEGUIDE (COVER) (ROUND, 8 HOLE) (2 HOLES CENTERED HORIZONTALLY, 2 HOLES CENTERS VERTICALLY)
DLA MIL-DTL-3922/57 D-2013 FLANGES, WAVEGUIDE (COVER) (ROUND, 8 HOLE) (2 HOLES CENTERED HORIZONTALLY, 2 HOLES CENTERS VERTICALLY)

European Committee for Standardization (CEN)

EN ISO 19085-2:2017 Woodworking machines - Safety - Part 2: Horizontal beam panel circular sawing machines
EN ISO 19085-2:2021 Woodworking machines - Safety - Part 2: Horizontal beam panel circular sawing machines (ISO 19085-2:2021)
FprEN ISO 19085-2:2021 Woodworking machines - Safety - Part 2: Horizontal beam panel circular sawing machines (ISO/FDIS 19085-2:2021)
EN ISO 21528-2:2017 Microbiology of the food chain - Horizontal method for the detection and enumeration of Enterobacteriaceae - Part 2: Colony-count technique
prEN ISO 4064-2 rev Water meters for cold potable water and hot water - Part 2: Test methods (ISO 4064-2:2014)
prEN ISO 4064-2 Water meters for cold potable water and hot water - Part 2: Test methods (ISO/DIS 4064-2:2023)
EN 14153-2:2003 Recreational diving services Safety related minimum requirements for the training of recreational scuba divers Part 2: Level 2 Autonomous Diver

KR-KS

KS C IEC 62044-2-2018(2023) Cores made of soft magnetic materials — Measuring methods — Part 2: Magnetic properties at low excitation level
KS F ISO 9239-2-2008 Method for fire tests of floorings－Part 2：Determination of the flame spread at a heat flux level of 25 kW/m2
KS C IEC 62044-2-2018 Cores made of soft magnetic materials — Measuring methods — Part 2: Magnetic properties at low excitation level
KS C 1508-1998(2023) Level recorders for recording sound level and/or vibration level

DIN

DIN EN ISO 19085-2:2022 Woodworking machines - Safety - Part 2: Horizontal beam panel circular sawing machines (ISO 19085-2:2021)
DIN EN ISO 4833-2:2022 Microbiology of the food chain - Horizontal method for the enumeration of microorganisms - Part 2: Colony count at 30 Â°C by the surface plating technique (ISO 4833-2:2013 + Cor. 1:2014 + Amd 1:2022)

International Electrotechnical Commission (IEC)

IEC 61580-2:1996 Methods of measurement for waveguides - Part 2: Level of intermodulation products

European Committee for Electrotechnical Standardization（CENELEC）

EN 61580-2:1996 Methods of Measurement for Waveguides Part 2: Level of Intermodulation Products
prEN IEC 60071-2:2022 Insulation co-ordination - Part 2: Application guidelines (Proposed horizontal standard)

Lithuanian Standards Office

LST EN 62044-2-2005 Cores made of soft magnetic materials. Measuring methods. Part 2: Magnetic properties at low excitation level (IEC 62044-2:2005)
LST EN 62044-2/AC-2021 Cores made of soft magnetic materials - Measuring methods - Part 2: Magnetic properties at low excitation level (IEC 62044-2:2005/COR1:2021)

American Society for Testing and Materials (ASTM)

ASTM E1364-95(2005) Standard Test Method for Measuring Road Roughness by Static Level Method
ASTM D4785-93 Standard Test Method for Low-Level Iodine-131 in Water
ASTM D5543-09 Standard Test Methods for Low-Level Dissolved Oxygen in Water
ASTM D5543-15 Standard Test Method for Low-Level Dissolved Oxygen in Water
ASTM D5543-94(2005) Standard Test Methods for Low-Level Dissolved Oxygen in Water
ASTM D5543-94(1999)e1 Standard Test Methods for Low-Level Dissolved Oxygen in Water

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization

PREN 3844-2-2018 Aerospace series Flammability of non-metallic materials Part 2: Small burner test@ horizontal Determination of the horizontal flame propagation (Edition P 2)

Danish Standards Foundation

DS/EN 62044-2:2005 Cores made of soft magnetic materials - Measuring methods - Part 2: Magnetic properties at low excitation level

PL-PKN

PN-EN 62044-2-2009/AC-2021-08 E Cores made of soft magnetic materials - Measuring methods - Part 2: Magnetic properties at low excitation level

TR-TSE

TS 2396-1976 LEVELLING POINT MONUMENTS AND CONSTRUCT?ON MEDHODS

ZA-SANS

NRS 048-2-2007 Electricity supply - Quality of supply Part 2: Voltage characteristics, compatibility levels, limits and assessment methods
NRS 048-2-2007 Ed 3 Electricity supply - Quality of supply Part 2: Voltage characteristics, compatibility levels, limits and assessment methods

VN-TCVN

TCVN 4884-2-2015 Microbiology of the food chain - Horizontal method for the enumeration of microorganisms .Part 2: Colony count at 30 degrees C by the surface plating technique

Others: Level 2,Determination of wear metal content in aviation working fluids Part 2: Inductively coupled plasma atomic emission spectrometer detection method