Test Instrument Components

Test Instrument Components, Total:488 items.

The international standard classification for "Test Instrument Components" includes: Power stations in general , Measurement of electrical and magnetic quantities , Hydraulic energy engineering , Exploratory and extraction equipment , Electrical and electronic testing , Geology. Meteorology. Hydrology , Non-destructive testing , Environmental testing , Education , Mechanical testing , Metrology and measurement. Physical phenomena (Vocabularies) , Test conditions and procedures in general , Substations. Surge arresters , Special measuring equipment for use in telecommunications , Other equipment for the chemical industry .

The Chinese standard classification for "Test Instrument Components" includes: Electric power testing technique , Electrical instrument and meter in general , Water power engineering , Petroleum drilling & production equipment and instrument , Petroleum geology exploration , Electric transmission and transformation equipment in general , Hydrology and water conservancy instrument , Universal electronic measuring instrument, equipment and system , X ray, magnetic powder, fluorescent light and other defectoscope , Nuclear instrument and detector in general , Special instruments for teaching , Testing machine and nondestructive flaw detector in general , Electronic measurement and equipment in general , Recording instrument and light oscillograph , Marking, packaging, transportation and storage , Ultrasonic wave and sound radiation defectoscope , Engineering investigation and geotechnical engineering in general , Special chemical instrument and meter , Geophysical search equipment .

Group Standards of the People's Republic of China

T/CEC 426.1-2020 General technical requirements for electric oil testing instruments Part 1: Trace moisture analyzer
T/CEC 542.1-2021 General Specifications for Gas Test Instruments for Electric Power Part 1: Gas Humidity Test Instruments
T/CEC 426.2-2021 General Specifications for Electric Power Oil Testing Instruments Part 2: Gas Chromatograph
T/CEC 542.2-2022 General technical requirements for gas testing instruments for electric power Part 2: Gas chromatography for sulfur hexafluoride gas purity testers
T/CEC 426.4-2023 General Technical Conditions for Electric Power Oil Testing Instruments Part 4: Rotating Oxygen Bomb Value Tester
T/CEC 426.3-2022 General Technical Conditions for Electric Power Oil Testing Instruments Part 3: Particle Size Meter
T/CEC 354-2020 General technical requirements for transformer low-voltage short-circuit impedance tester
T/CIS 17003-2019 Electronic instrument transformer testing equipments

Professional Standard - Energy and Power Planning

DL/T 849.5-2019 General technical specification of test instruments used for power equipments Part 5: Oscillating wave high voltage generator
DL/T 1256-2013 General Technical Specification for Loss Testers of Transformers without and with Load
DL/T 849.2-2004 General technical specification of test instruments used for power equipments Part 2: Fault locator for power cable
DL/T 849.1-2019 General technical specification of test instruments used for power equipments Part 1: Fault flashover test instrument for power cable
DL/T 1694.4-2017 Calibration specification for high voltage testing instruments. Part 4: Insulation oil voltage withstanding tester
DL/T 849.3-2004 General technical specification of test instruments used for power equipments Part 3: Route test instrument for power cable
DL/T 987-2005 General technical conditions of resistive current tester for zinc oxide surge arrester
DL/T 1305-2013 General Technical Specification for Transformer Oils Dissipation Factor Tester
DL/T 987-2017 General technical specifications of resistive current testers for zinc oxide surge arrester
DL/T 849.5-2004 General technical specification of test instruments used for power equipments Part 5: Oscillating wave high voltage generator
DL/T 1694.2-2017 Calibration specification for high voltage testing instruments Part 2: Power transformer tap-changers tester
DL/T 846.13-2020 General technical specifications for high voltage test equipments -Part 13: Arrester monitor tester
DL/T 1694.8-2021 Calibration specification for high voltage testing instruments -Part 8: Power capacitance and inductance tester
DL/T 849.6-2004 General technical specification of test instruments used for power equipments Part 6: High voltage resonant test system
DL/T 1104-2009 Potentiometric Readout
DL/T 849.3-2019 General technical specification of test instruments used for power equipments Part 3: Route test instrument for power cable
DL/T 849.2-2019 General technical specification of test instruments used for power equipments Part 2: Fault locator for power cable
DL/T 1104-2024 Potentiometer type instrument measuring instrument
DL/T 2437.1-2021 General technical specification for SF6 gas tester — Part 1: SF6 gas density monitor calibrator
DL/T 1694.5-2017 Calibration suecification for high voltage testing instruments. Part 5: Resistive current testers for zinc oxide surge arrester
DL/T 1951-2018 General technical specification for winding deformation tester of power transformers
DL/T 849.1-2004 General technical specification of test instruments used for power equipments Part 1: Fault flashover test instrument for power cable
DL/T 849.6-2016 General specification for special test instruments used in power equipments Part 6: High voltage resonant test device
DL/T 1694.3-2017 Calibration specification for high voltage testing instruments Part 3: High voltage switch operating characteristics tester
DL/T 1221-2013 Universal Specification for Transformer Characteristic Tester
DL/T 1694.9-2021 Calibration specification for high voltage test instruments—Part 9: Power transformer no-load and load loss tester
DL/T 849.4-2004 General technical specification of test instruments used for power equipments Part 4: Very low frequency high voltage generator

Professional Standard - Petroleum

SY/T 6639-2012 Calibration Method for Geophone Tester
SY/T 5166-2007 Technical specifications of pumping well tester
SY/T 6371-2012 General Technical Specification for Geophone Tester
SY/T 6639-2005 The calibration method of geophone tester
SY/T 5377-2013 Specification for Drilling Fluid Testing Instruments
SY 6639-2012 Geophone Tester Calibration Method
SY 5377-2013 Technical conditions of drilling fluid parameter testing equipment
SY 6371-2012 General specifications for geophone testers
SY/T 6371-1998 General technical standard for geophone tester

Professional Standard - Electricity

DL/T 849.6-2016(英文版) General technical requirements for test instruments for power equipment Part 6: High voltage resonance test equipment
DL/T 849.3-2019(英文版) General technical requirements for test instruments for power equipment Part 3: Cable routing instrument
DL/T 849.1-2019(英文版) General technical requirements for test instruments for power equipment Part 1: Cable fault flash detector

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 6587.5-1986 Shock tests for electronic measuring instruments
GB/T 17860.2-1999 Electrical measuring instruments - X-t recorders - Part 2: Recommended additional test methods
GB/T 16896.1-2005 Instruments and software used for measurements in high-voltage impulse tests-Part 1: Requirements for instruments
GB/T 6587.6-1986 Transportation tests for electronic measuring instruments
GB/T 2900.79-2008 Electrotechnical terminology - Electrical and electronic measurements and measuring instruments - Part 3: Types of electrical measuring instruments
GB/T 4935.1-2008 Instrument for soil test - Oedometer - Part 1: Single level arm oedometer
GB/T 16896.2-2010 Digital recorders for measurements in high-voltage impulse tests—Part 2:Software requirement
GB/T 21997.1-2008 Instrument for soil test - Liquid limit device - Part 1：Casagrande liquid limit device
GB/T 6587.2-1986 Temperature tests for electronic measuring instruments
GB/T 39849-2021 Non-destructive testing instruments—Ultrasonic time-of-flight diffraction instrument—Methods of performance tests
GB/T 9039-1988 Technical condition for transmission measuring set 10kHz to 18. 6MHz
GB/T 36416.2-2018 Testing machine vocabulary—Part 2:Non-destructive testing instruments
GB/T 25480-2010 Basic environmental conditions and testing methods for transportation and storage of instruments
GB/T 13606-2007 Instrument for geotechnical engineering—General specifications of vibrating wire sensor
GB/T 3412.1-2009 Instrument for dam monitoring—Readout unit—Part 1:Readout unit for vibrating wire type transducer
GB/T 27992.3-2016 Instruments for water-depth measurement—Part 3: Echo sounder
GB/T 6587.4-1986 Vibration tests for electronic measuring instruments
GB/T 16896.1-2024 Instruments and software used for measurements in high-voltage and high-current tests—Part 1: Requirements for instruments for impulse tests
GB/T 4935.2-2009 Instrument for soil test—Oedometer—Part 2:Pneumatic oedometer
GB 21749-2008 Safety requirements for the educational equipment - Vitreous equipment and attachments
GB/T 6587.3-1986 Humidity tests for electronic measuring instruments
GB/T 26832-2011 Non-destructive testing instruments - Specifications for the wire rope electromagnetic tester
GB/T 21997.2-2008 Instrument for soil test - Liquid limit device - Part 2：Fall cone liquid limit device
GB/T 8993-1998 Environmental conditions and testing procedures for nuclear instrumentation

Professional Standard - Chemical Industry

HG/T 2382-1992 General Technical Specifications for Rubber Testing Instruments and Equipment

Military Standard of the People's Republic of China-General Armament Department

GJB 1692-1993 Flight test instrument calibration requirements
GJB 4104.4-2000 Small arms test procedures for optical instruments
GJB 8349-2015 General requirements for random documents for military test instruments
GJB 9133-2017 Military electronic test instrument terminology
GJB 570.13-1988 Meteorological instrument final test method cloud meter

Professional Standard - Machinery

JB/T 9394-2011 Non-destructive testing instruments — Specifications for the X-ray stressometers
JB/T 7481-1994 Wave Instrument Test Methods
JB/T 7411-2012 Non-destructive testing instruments —Specification of electricity magnetic yoke magnetic particle flaw detectior
JB/T 11610-2013 Non-destructive testing instrument — Specifications for digital ultrasonic testing instruments
JB/T 12727.2-2020 Nondestructive tesing instrument-Standard testing block - Part 2: Radiographic testing block
JB/T 7480-1994 Current instrument test method
JB/T 11605-2013 Non-destructive testing instruments — Metal magnetic memory instrument - technical requirments
JB/T 12726-2016 Nondestructive tesing instrument. Standard testing block. General technical conditions
JB/T 7439.2-1994 Terminology relating to laboratory instruments - Dynamic test instrument
JB/T 9464-1999 Ocean environmental conditions for instrumentation
JB/T 12727.4-2016 Nondestructive testing instrument. Standard test block. Part 4: Magnetic particle testing block
JB/T 5754-2011 Non-destructive testing instruments —Specifications for one-channel acoustic emission testing instrument
JB/T 12727.3-2016 Nondestructive tesing instrument. Standard testing block. Part 3: Eddy current testing block
JB/T 5525-2011 Non-destructive testing instruments —characteristics measured method for one-channel eddy current testing instrument
JB/T 7395.6-1994 Electrical measuring instruments terminology Magnetic measuring instruments
JB/T 12456-2015 Non-destructive testintg instruments-Technical requirements of X-ray delector for circuit board detection
JB/T 13809-2020 In-situ mechanical testing instruments for solid materials-General specification
JB/T 20200-2021 Filter integrity tester
JB/T 12727.5-2016 Nondestructive tesing instrument. Standard test block. Part 5: Penetrant testing block
JB/T 11779-2014 Non-Destructive Testing Instrument - Specifications for Phased Array Ultrasonic Testing Instruments

Professional Standard - Military and Civilian Products

WJ 1023-1976 Standard parts for optical instruments Dryers for optical instruments (restricted standard)
WJ 1065-2007 Optical test instrument objective lens series
WJ 1066-2007 Eyepiece series for optical testing instruments
WJ 1022-1976 Standard parts for optical instruments Dryers for optical instruments (restricted standard)
WJ 1025-1976 Standard parts for optical instruments Dryers for optical instruments (restricted standard)
WJ 1026-1976 Standard parts for optical instruments Dryers for optical instruments (restricted standard)
WJ 1010-1994 Optical Instrument Parts Half Ear Handwheel
WJ 1037-1994 Specifications for optical instrument parts eyewear
WJ 1040-1994 General protection for optical instrument parts
WJ 1014-1994 Circular level for optical instrument parts
WJ 1001-1994 Optical instrument parts pressure ring
WJ 1024-1976 Standard parts for optical instruments Dryers for optical instruments (restricted standard)
WJ 1016-1994 Fixed level for optical instrument parts
WJ 1041-1994 Specifications for protection of components of optical instruments
WJ 2186-1994 Optical instrument parts Night vision goggles
WJ 1019-1994 Adjustable level for optical instrument parts

Professional Standard - Energy

DL/T 1694.11-2024 Specification for calibration of high voltage test instruments and equipment Part 11: Capacitance and current testers
DL/T 849.4-2024 Generic Technical Conditions for Specialized Testing Instruments for Power Equipment - Part 4: Ultra-Low Frequency High Voltage Generator

Professional Standard - Geology

DZ/T 0196.2-1997 General technical conditions for logging instrument - ground instrument (system)
DZ/T 0121.9-1994 Geological instrumentation terminology Geology geophysics prospecting data process equipment terms
DZ/T 0196.9-1997 General technical conditions for logging instrument - instrument indicator grading

National Metrological Verification Regulations of the People's Republic of China

JJG(电子) 310002-2006 Specification for verification of DC parameter testers for semiconductor discrete devices
JJG(电子) 310003-2006 Specification for verification of capacitor parameter testers for semiconductor discrete devices
JJG(石油) 21-1996 Verfication Regulation of Geophone Tester
JJG(电子) 05010-1988 RT150/RT160 Relay Test Instrument Trial Verification Regulations

Professional Standard - Post and Telecommunication

YD/T 505-1991 Technical conditions for 10kHz - 100MHz transmission tester
YD/T 596-1992 Technical conditions of white noise test sets

Guangdong Provincial Standard of the People's Republic of China

DB44/T 1496.1-2014 Calibration method of LED test instrument Part 1: Integrating sphere spectrum test system
DB44/T 1496.2-2016 Calibration methods for LED test instruments Part 2: Goniophotometric test systems

National Metrological Technical Specifications of the People's Republic of China

JJF 2177-2024 Calibration Specification for Lightning Protection Component Testers
JJF 1201-2008 Calibration Specification for Hearing Aids Measurement Instruments

Professional Standard - Aviation

HB 6136.5-1987 Flight Test Instrument (Static) Calibration Specification Force

German Institute for Standardization

DIN EN 62052-11:2003 Electricity metering equipment (AC) - General requirements, tests and test conditions - Part 11: Metering equipment (IEC 62052-11:2003); German version EN 62052-11:2003
DIN EN 61083-1:2002 Instruments and software used for measurements in high-voltage impulse tests - Part 1: Requirements for instruments (IEC 61083-1:2001); German version EN 61083-1:2001
DIN 18213 E:2021 Draft Document - Optics and optical instruments - Field procedures for testing geodetic and surveying Instruments - GNSS Instruments
DIN ISO 17123-3 E:2017-10 Optics and optical instruments - Field procedures for testing geodetic and surveying instruments - Part 3: Theodolites
DIN 18213 E:2021-03 Optics and optical instruments Field methods for testing geodetic and mapping instruments GNSS instruments
DIN 18213:2022 Optics and optical instruments - Field procedures for testing geodetic and surveying Instruments - GNSS Instruments
DIN 53519-1:1973 Testing of elastomers; determination of indentation hardness of soft rubber (IRHD), hardness test on samples, part 1: Apparatus and specimens
DIN 18213:2021-03 Draft Document - Optics and optical instruments - Field procedures for testing geodetic and surveying Instruments - GNSS Instruments
DIN ISO 17123-4:2017-09 Optics and optical instruments - Field procedures for testing geodetic and surveying instruments - Part 4: Electro-optical distance meters (EDM measurements to reflectors) (ISO 17123-4:2012)
DIN 96298-3:2017 Medical instruments - Terms, measuring methods and tests - Part 3: Tests
DIN 16281:2020-12 Support for measuring instruments and fittings
DIN 16281:2020 Support for measuring instruments and fittings
DIN IEC 333:1995 Test methods for charged particle semiconductor detectors of nuclear instruments
DIN 96298-3 E:2017-04 Medical instruments - Terms, measuring methods and tests - Part 3: Tests
DIN ISO 17123-2:2021 Optics and optical instruments - Field procedures for testing geodetic and surveying instruments - Part 2: Levels (ISO 17123-2:2001); Text in German and English
DIN 96298-3:2017-10 Medical instruments - Terms, measuring methods and tests - Part 3: Tests
DIN ISO 17123-3:2019 Optics and optical instruments - Field procedures for testing geodetic and surveying instruments - Part 3: Theodolites (ISO 17123-3:2001)
DIN ISO 17123-5:2022 Optics and optical instruments - Field procedures for testing geodetic and surveying instruments - Part 5: Total stations (ISO 17123-5:2018)
DIN 16281 E:2019-07 Support for measuring instruments and fittings
DIN EN IEC 61083-3:2022-08*VDE 0432-12:2022-08 Instruments and software used for measurement in high-voltage and high-current tests
DIN EN 61083-2:2013-12*VDE 0432-8:2013-12 Instruments and software used for measurement in high-voltage and high-current tests
DIN ISO 17123-5 E:2021 Draft Document - Optics and optical instruments - Field procedures for testing geodetic and surveying instruments - Part 5: Total stations (ISO 17123-5:2018); Text in German and English
DIN ISO 17123-2:2021-02 Optics and optical instruments - Field procedures for testing geodetic and surveying instruments - Part 2: Levels (ISO 17123-2:2001); Text in German and English / Note: Date of issue 2021-01-08
DIN 18723-7:1990-07 Field procedure for precision testing of surveying instruments; gyroscopes
DIN ISO 17123-4:2017 Optics and optical instruments - Field procedures for testing geodetic and surveying instruments - Part 4: Electro-optical distance meters (EDM measurements to reflectors) (ISO 17123-4:2012)
DIN ISO 17123-3:2017-10 Draft Document - Optics and optical instruments - Field procedures for testing geodetic and surveying instruments - Part 3: Theodolites (ISO 17123-3:2001); Text in German and English
DIN ISO 17123-3 E:2017 Draft Document - Optics and optical instruments - Field procedures for testing geodetic and surveying instruments - Part 3: Theodolites (ISO 17123-3:2001); Text in German and English
DIN ISO 17123-5:2021-05 Draft Document - Optics and optical instruments - Field procedures for testing geodetic and surveying instruments - Part 5: Total stations (ISO 17123-5:2018); Text in German and English
DIN ISO 17123-5 E:2021-05 Optics and optical instrument testing - Field procedures for cadastral surveying and mapping instruments - Part 5: Total stations (ISO 17123-5:2018)
DIN ISO 17123-4 E:2016 Draft Document - Optics and optical instruments - Field procedures for testing geodetic and surveying instruments - Part 4: Electro-optical distance meters (EDM measurements to reflectors) (ISO 17123-4:2012); Text in German and English
DIN ISO 16331-1:2020-09 Optics and optical instruments - Laboratory procedures for testing surveying and construction instruments - Part 1: Performance of handheld laser distance meters (ISO 16331-1:2017)
DIN ISO 16331-1 E:2018-10 Optics and optical instruments - Laboratory procedures for testing surveying and construction instruments - Part 1: Performance of handheld laser distance meters
DIN 3761-5:1984 Rotary shaft lip type seals for automobils; test; measuring requirements and -instruments
DIN ISO 16331-1:2020 Optics and optical instruments Laboratory procedures for testing measurement and construction instruments Part 1: Performance of handheld laser distance meters
DIN IEC 60333:1995 Nuclear instrumentation - Semiconductor charged-particle detectors - Test procedures (IEC 60333:1993)
DIN EN 60051-9:1991 Direct acting indicating analogue electrical measuring instruments and their accessories; part 9: recommended test methods (IEC 60051-9:1988, edition 4); german version EN 60051-9:1989
DIN IEC 61083-2 E:2006 Draft Document - Instruments and software used for measurements in high-voltage impulse test - Part 2: Requirements for software (IEC 42/205/CD:2006)
DIN EN 61083-1 E:2017 Draft Document - Instruments and software used for measurements in high-voltage and high-current tests - Part 1: Requirements for hardware for impulse tests (IEC 42/344/CD:2016)
DIN ISO 17123-2 E:2021 Draft Document - Optics and optical instruments - Field procedures for testing geodetic and surveying instruments - Part 2: Levels (ISO 17123-2:2001); Text in German and English
DIN ISO 17123-2:2023-12 Optics and optical instruments - Field procedures for testing geodetic and surveying instruments - Part 2: Levels (ISO 17123-2:2001)
DIN VDE 0493-100 E:2008 Draft Document - Radiation protection instrumentation - Periodic testing of portable contamination monitoring assemblies
DIN ISO 16331-1:2020 Optics and optical instruments Laboratory procedures for testing measurement and construction instruments Part 1: Performance of handheld laser distance meters
DIN ISO 17123-2:2023 Optics and optical instruments - Field procedures for testing geodetic and surveying instruments - Part 2: Levels (ISO 17123-2:2001)
DIN VDE 0493-100 E:2008-09 Draft Document - Radiation protection instrumentation - Periodic testing of portable contamination monitoring assemblies
DIN ISO 17123-1:2017 Optics and optical instruments - Field procedures for testing geodetic and surveying instruments - Part 1: Theory (ISO 17123-1:2014)
DIN 16281:2019-07 Draft Document - Support for measuring instruments and fittings
DIN EN 60749-40:2012-02 Semiconductor devices - Mechanical and climatic test methods - Part 40: Board level drop test method using a strain gauge (IEC 60749-40:2011); German version EN 60749-40:2011
DIN 43834:1982-11 Measurement and control; fastening for measuring and control instruments for panel mounting; fastening component; fastening holes in the instrument
DIN ISO 17123-4 E:2016-02 Draft Document - Optics and optical instruments - Field procedures for testing geodetic and surveying instruments - Part 4: Electro-optical distance meters (EDM measurements to reflectors) (ISO 17123-4:2012); Text in German and English

Danish Standards Foundation

DANSK DS/EN 61083-1:2002 Instruments and software used for measurements in high-voltage impulse tests - Part 1: Requirements for instruments
DS/EN 61083-1:2002 Instruments and software used for measurements in high-voltage impulse tests - Part 1: Requirements for instruments
DANSK DS/EN 61143-2:1995 Electrical measuring instruments - X-t recorders - Part 2: Recommended additional test methods
DS/EN 61143-2:1996 Electrical measuring instruments - X-t recorders - Part 2: Recommended additional test methods
DS 2362-1:1994 Measuring equipment-Inclination measuring instruments-Part 1:Inclination measuring instruments (levels)-Definitions,requirements,testing
DANSK DS/EN 61083-2:2013 Instruments and software used for measurement in high-voltage and high-current tests - Part 2: Requirements for software for tests with impulse voltages and currents
DS/EN IEC 61083-3:2021 Instruments and software used for measurement in high-voltage and high-current tests – Part 3: Requirements for hardware for tests with alternating and direct voltages and currents
DS/EN 61083-2:2013 Instruments and software used for measurement in high-voltage and high-current tests - Part 2: Requirements for software for tests with impulse voltages and currents
DANSK DS/EN 62047-20:2014 Semiconductor devices - Micro-electromechanical devices - Part 20: Gyroscopes
DANSK DS/EN 60749-40:2011 Semiconductor devices - Mechanical and climatic test methods - Part 40: Board level drop test method using a strain gauge
DS/IEC/TR 61948-3:2006 Nuclear medicine instrumentation - Routine tests - Part 3: Positron emission tomographs
DANSK DS/EN ISO 13696:2002 Optics and optical instruments – Test methods for radiation scattered by optical components

Korean Agency for Technology and Standards (KATS)

KS C IEC 61083-1-2006(2016) Instruments and software used for measurements in high-voltage impulse tests Part 1：Requirements for instruments
KS C IEC 61083-1-2006(2021) Instruments and software used for measurements in high-voltage impulse tests Part 1：Requirements for instruments
KS C IEC 61083-1:2006 Instruments and software used for measurement in High-voltage impulse tests－Part 1：Requirements for instruments
KS C IEC 61083-1-2022 Instruments and software used for measurements in high-voltage and high-current tests — Part 1: Requirements for instruments for impulse tests
KS C IEC 61083-1:2022 Instruments and software used for measurements in high-voltage and high-current tests — Part 1: Requirements for instruments for impulse tests
KS B ISO 10109-6-2022 Optics and optical instruments－Environmental requirements－Part 6：Test requirements for medical optical devices
KS B ISO 10109-7-2024 Optics and optical instruments — Environmental requirements —Part 7: Test requirements for optical measuring instruments
KS C IEC 61034-1-2020 Measurement of smoke density of cables burning under defined conditions — Part 1: Test apparatus
KS C IEC 61143-2-2023 Electrical measuring instruments－X-t recorders－Part 2：Recommended additional test methods
KS C IEC 61034-1:2020 Measurement of smoke density of cables burning under defined conditions — Part 1: Test apparatus
KS B ISO 10109-7-2019 Optics and optical instruments－Environmental requirements－Part 7：Test requirements for optical measuring instruments
KS B ISO 10109-7:2004 Optics and optical instruments－Environmental requirements－Part 7：Test requirements for optical measuring instruments
KS B ISO 10109-7-2004(2019) Optics and optical instruments－Environmental requirements－Part 7：Test requirements for optical measuring instruments
KS P 7430-1995(2005) Dental rotary instruments - Test methods
KS R ISO 6487-2022 Road vehicles — Techniques of measurement inimpact tests — Instrumentation
KS M 2670-2021 Glasswares for testing apparatus of petroleum products
KS C IEC 61143-2-2013(2018) Electrical measuring instruments－X-t recorders－Part 2：Recommended additional test methods
KS B ISO 13696-2021 Optics and optical instruments－Test methods for radiation scattered by optical components
KS P ISO 8325:2018 Dentistry — Test methods for rotary instruments
KS C IEC 61577-2-2022 Radiation protection instrumentation ? Radon and radon decay product measuring instruments ? Part 2: Specific requirements for 222Rn and 220Rn measuring instruments
KS B ISO 10109-8-2022 Optics and optical instruments－Environmental requirements－Part 8：Test requirements for extreme conditions of use
KS R 1158-2012 Characteristics of measuring instruments for the collision test
KS P ISO 8325-2018 Dentistry — Test methods for rotary instruments

Spanish Association for Standardization (UNE)

UNE-EN 61083-1:2002 Instruments and software used for measurement in high-voltage impulse tests -- Part 1: Requirements for instruments.
AENOR UNE 100010-1:1989 Air conditioning. Test of adjustment and balance. Part 1: instrumentation.
UNE 115-422-1989 Earthquake tester. Instrument board
UNE-EN 60749-40:2011 Semiconductor devices - Mechanical and climatic test methods - Part 40: Board level drop test method using a strain gauge (Endorsed by AENOR in November of 2011.)
UNE-EN 60051-9/A1:1996 DIRECT ACTING INDICATING ANALOGUE ELECTRICAL-MEASURING INSTRUMENTS AND THEIR ACCESORIES. PART 9: RECOMMENDED TEST METHODS.
UNE-EN 60051-9:1993 DIRECT ACTING INDICATING ANALOGUE ELECTRICAL MEASURING INSTRUMENTS AND THEIR ACCESSORIES. PART 9: RECOMMENDED TEST METHODS.
UNE-EN 60051-9/A2:1996 DIRECT ACTING INDICATING ANALOGUE ELECTRICAL-MEASURING INSTRUMENTS AND THEIR ACCESSORIES. PART 9: RECOMMENDED TEST METHODS.
UNE-EN 62047-20:2014 Semiconductor devices - Micro-electromechanical devices - Part 20: Gyroscopes (Endorsed by AENOR in November of 2014.)
UNE-EN 61083-2:2014 Instruments and software used for measurement in high-voltage and high-current tests - Part 2: Requirements for software for tests with impulse voltages and currents
UNE-IEC 60050-394:2009 International Electrotechnical Vocabulary - Part 394: Nuclear instrumentation - Instruments, systems, equipment and detectors.

Swedish Institute for Standards

SS-EN 61083-1:2002 Instruments and software used for measurements in high-voltage impulse tests - Part 1: Requirements for instruments
SS-EN 61143-2:1995 Electrical measuring instruments - X-t recorders - Part 2: Recommended additional test methods

Association Francaise de Normalisation

NF C41-105*NF EN 61083-1:2001 Instruments and software used for measurement in high-voltage impulse tests - Part 1 : requirements for instruments
NF EN 61083-1:2001 Devices and software used for measurements during high voltage impulse tests - Part 1: requirements for devices
NF EN 61143-2:1994 Electrical measuring devices - XT recorders - Part 2: recommended additional test methods
FD X07-041:2019 Monitoring of measuring instruments - Inter-Instrument Comparisons (C2l) - Conditions of implementation and limits of application
NF S12-140*NF EN ISO 9801:2010 Ophthalmic instruments - Trial case lenses
NF S12-140:1999 Ophthalmic instruments. Trial case lenses.
NF EN ISO 10140-5:2021 Acoustics - Laboratory measurement of the sound insulation of construction elements - Part 5: requirements relating to installations and test equipment
NF C32-073-1:1993 MEASUREMENT OF SMOKE DENSITY OF ELECTRIC CABLES BURNING UNDER DEFINED CONDITIONS. PART 1 : TEST APPARATUS.
NF C41-083-3:2021 Instruments and software used for measurement in high-voltage and high current tests - Part 3 : requirements for hardware for tests with alternating and direct voltages and currents
NF EN 60749-40:2012 Semiconductor devices - Mechanical and climatic test methods - Part 40: Board-level drop test method using a strain gauge
NF E05-059-1:2003 Geometrical products specification (GPS) - Acceptance tests and reverification tests of profile measuring instruments - Part 1 : measuring instruments for areal surface texture.
NF D30-500/A1:1997 Test gases - Test pressures - Appliances categories.
NF EN 62047-20:2014 Dispositifs à semiconducteurs - Dispositifs microélectromécaniques - Partie 20 : gyroscopes

The Directorate General of Specifications and Metrology (DGSM)

OS GSO IEC 61083:2007 Instruments and software used for measurement in high- voltage impulse tests - Part 1: Requirements for instruments
OS GSO ISO 17123-4:2008 Optics and optical instruments - Field procedures for testing geodetic and surveying instruments - Part 4: Electro-optical distance meters (EDM instruments)
OS GSO ISO 17123-3:2007 Optics and optical instruments- Field procedures for testing geodetic and surveying instruments- Part 3: Theodolites
OS GSO IEC 60333:2009 Nuclear instrumentation - Semiconductor charged-particle detectors - Test procedures
OS GSO ISO 17123-1:2008 Optics and optical instruments - Field procedures for testing geodetic and surveying instruments - Part 1: Theory
OS GSO IEC 62088:2014 Nuclear instrumentation - Photodiodes for scintillation detectors - Test procedures
OS GSO ISO 17123-2:2007 Optics and optical instruments- Field procedures for testing geodetic and surveying instruments- Part 2: Levels
OS GSO IEC 61143-2:2012 Electrical measuring instruments - X-t recorders - Part 2: Recommended additional test methods
OS GSO ISO 16331-1:2013 Optics and optical instruments -- Laboratory procedures for testing surveying and construction instruments -- Part 1: Performance of handheld laser distance meters
OS GSO ISO 17123-5:2007 Optics and optical instruments-Field procedures for testing geodetics and surveying instruments- Part 5: Electronic tacheometers

Comitato Elettrotecnico Italiano

CEI EN 61083-1:2002 Instruments and software used for measurements in high-voltage impulse tests - Part 1: Requirements for instruments
CEI EN 61143-2:1997 Electrical measuring instruments – X-t recorders - Part 2: Recommended additional test methods
CEI EN 61083-2:2014 Instruments and software used for measurement in high-voltage and highcurrent tests Part 2: Requirements for software for tests with impulse voltages and currents
CEI EN 60749-40:2012 Semiconductor devices - Mechanical and climatic test methods Part 40: Board level drop test method using a strain gauge
CEI EN 62047-20:2016 Semiconductor devices - Micro-electromechanical devices Part 20: Gyroscopes

CENELEC - European Committee for Electrotechnical Standardization

EN 61083-1:1993 Digital recorders for measurements in high-voltage impulse tests Part 1: Requirements for digital recorders

Bureau of Indian Standards

IS 15638-1-2023 Instruments and Software Used for Measurements in High-Voltage and High-Current Tests - Part 1 Requirements for Instruments for Impulse Tests
IS 12554-2-1999 Non-destructive Coating Thickness Testing Instruments - Part 2 : Magnetic Instruments
IS 3222-1-1989 Instrument Screws - Part 1 : Fasteners for Drawing Instruments

International Electrotechnical Commission (IEC)

IEC 61083-1:2001 Instruments and software used for measurement in high-voltage impulse tests - Part 1: Requirements for instruments
IEC 61083-1:2021 Instruments and software used for measurements in high-voltage and high-current tests - Part 1: Requirements for instruments for impulse tests
IEC 61028:1990/AMD1:1995 Amendment 1 - Electrical measuring instruments - X-Y recorders
IEC 61028:1990/AMD2:1997 Amendment 2 - Electrical measuring instruments - X-Y recorders
IEC 60050-394:1995/AMD1:1996 Amendment 1 - International Electrotechnical Vocabulary (IEV) - Part 394: Nuclear instrumentation - Instruments
IEC 60050-394:1995/AMD2:2000 Amendment 2 - International Electrotechnical Vocabulary (IEV) - Part 394: Nuclear instrumentation - Instruments
IEC 60044-4:1980 Instrument transformers. Part 4 : Measurement of partial discharges
CISPR 16-1-1-2010/AMD1-2010 Amendment 1 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-1: Radio disturbance and immunity measuring apparatus - Measuring apparatus
CISPR 16-1-1-2010/AMD2-2014 Amendment 2 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-1: Radio disturbance and immunity measuring apparatus - Measuring apparatus
CISPR 16-1-1:2010/AMD2:2014 Amendment 2 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-1: Radio disturbance and immunity measuring apparatus - Measuring apparatus
CISPR 16-1-1:2010/AMD1:2010 Amendment 1 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-1: Radio disturbance and immunity measuring apparatus - Measuring apparatus
IEC 60050-300-313:2001 Electrotechnical terminology-Electrical and electronic measurements and measuring instruments-Part 3:Types of electrical measuring instruments
IEC 60278:1968 Documentation to be supplied with electronic measuring apparatus

GCC Standardization Organization

GSO IEC 61083-1:2023 Instruments and software used for measurements in high-voltage and high-current tests - Part 1: Requirements for instruments for impulse tests
GSO ISO 17123-7:2007 Optics and optical instruments- Field procedures for testing geodetics and surveying instruments - Part 7: Optical plumbing instruments
GSO IEC 61143-2:2012 Electrical measuring instruments - X-t recorders - Part 2: Recommended additional test methods
GSO OIML R 129-3:2022 Multi-dimensional measuring instruments Part 3: Test report format
GSO ISO 17123-1:2008 Optics and optical instruments - Field procedures for testing geodetic and surveying instruments - Part 1: Theory
GSO ISO 18899:2014 Rubber -- Guide to the calibration of test equipment
GSO IEC 61083-3:2023 Instruments and software used for measurement in high-voltage and high-current tests - Part 3: Requirements for hardware for tests with alternating and direct voltages and currents
GSO IEC 60749-32:2014 Semiconductor devices - Mechanical and climatic test methods - Part 32: Flammability of plastic-encapsulated devices (externally induced)
GSO IEC 62047-20:2021 Semiconductor devices - Micro-electromechanical devices - Part 20: Gyroscopes
GSO OIML R61-2:2021 Automatic gravimetric filling instruments. Part 2: Test procedures
GSO ISO 16331-1:2013 Optics and optical instruments -- Laboratory procedures for testing surveying and construction instruments -- Part 1: Performance of handheld laser distance meters
GSO IEC 60749-40:2015 Semiconductor devices - Mechanical and climatic test methods - Part 40: Board level drop test method using a strain gauge
GSO IEC 60749-31:2014 Semiconductor devices - Mechanical and climatic test methods - Part 31: Flammability of plastic-encapsulated devices (internally induced)

Standard Association of Australia （SAA）

AS 61083.1:2006 Instruments and software used for measurement in high-voltage impulse tests - Requirements for instruments
AS Z43.1:1971 Instrumentation for audiometry, Part 1: Pure tone audiometers
AS 1024:1971 Direct recording electrical measuring instruments and their accessories
AS 1072.2:1974 Unrecorded magnetic tapes for instrumentation applications, Part 2: Physical properties and test methods
AS 1591.6:1977 Instrumentation for audiometry - Speech audiometers

RO-ASRO

STAS 10060-1975 ELECTRON 1C MEASURING INSTRUMENTS Environmental test conditions
STAS 815-1988 LABORATORY PORCELAIN Test methods

Lithuanian Standards Office

LST EN 61083-1-2002 Instruments and software used for measurements in high- voltage impulse tests. Part 1: Requirements for instruments (IEC 61083-1:2001)

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO IEC 61083-1:2023 Instruments and software used for measurements in high-voltage and high-current tests - Part 1: Requirements for instruments for impulse tests
BH GSO OIML R 129-3:2023 Multi-dimensional measuring instruments Part 3: Test report format
BH GSO IEC 62088:2016 Nuclear instrumentation - Photodiodes for scintillation detectors - Test procedures
BH GSO OIML R61-2:2022 Automatic gravimetric filling instruments. Part 2: Test procedures
BH GSO IEC 61083-3:2023 Instruments and software used for measurement in high-voltage and high-current tests - Part 3: Requirements for hardware for tests with alternating and direct voltages and currents
BH GSO IEC 62047-20:2022 Semiconductor devices - Micro-electromechanical devices - Part 20: Gyroscopes

YU-JUS

JUS N.H9.100-1984 Instrument transformers. Measurements ofpartial discharges
JUS L.G1.007-1994 Direct acting indicating analogue electrical measuring instruments and their accessories- Special requirements for multi-function instruments
JUS L.G1.009-1994 Direct acting indicating analogue electrical measuring instruments and their accessories- Test methods
JUS M.G0.300-1991 Machine tools. Cheking instruments for testing machine tools
JUS L.G1.008-1994 Direct acting indicating analogue electrical measuring instruments and their accessories- Special requirements for accessories
JUS L.G1.009/1-1995 Direct acting indicating analogue electrical measuring instruments and their accessories - Test methods - Amendement 1
JUS N.A5.544-1989 Bigh-voltage test technicpies. Application gui?e for measuring ?evices

Association for Electrical, Electronic & Information Technologies (VDE)

VDE 0432-7-2002 Instruments and software used for measurements in high-voltage impulse tests - Part 1: Requirements for instruments (IEC 61083-1:2001); German version EN 61083-1:2001
VDE 0493-100-2010 Strahlenschutz-Messgeraete - Teil 100: Wiederkehrende Pruefung von tragbaren Kontaminationsmonitoren
VDE 0432-7-2017 Instruments and software used for measurements in high-voltage and high-current tests - Part 1: Requirements for hardware for impulse tests (IEC 42/344/CD:2016)

Military Standards (MIL-STD)

MIL MIL-T-50331-1969 TEST SET, SUBASSEMBLY MX-8046/TPM-22 RECEIVER/TRANSMITTER TESTER( (NO S/S DOCUMENT)
MIL MIL-T-58093A-1976 TESTER, GYRO INDICATOR, PITCH AND ROLL (NO S/S DOCUMENT)
MIL MIL-P-23108-1961 PLUG-IN UNIT FOR TEST SET, ECHO SIMULATOR (U) (NO S/S DOCUMENT)
DOD A-A-53790-1988 TEST SET, ELECTROSURGICAL APPARATUS
MIL MIL-T-49117-1977 TEST SET, RECEIVER TS-3565( )/TRS-2
MIL MIL-STD-1361A-1973 FLUIDICS TEST METHODS AND INSTRUMENTATION (NO S/S DOCUMENT) (SUPERSEDING MIL-STD-1361)
MIL MIL-DTL-13169E-2011 Wire, Electrical (for Instrument Test Leads)
MIL MIL-T-45049D-1992 TESTER, DIESEL FUEL INJECTOR (NO S/S DOCUMENT) (SUPERSEDING MIL-T-45049C)

Magyar Szabványügyi Testület

MNOSZ 9967-1951 Instrument parts. Tensioner
MNOSZ 10005-1951 Instrument parts. work piece
MNOSZ 10010-1951 Instrument parts striped U-shaped instrument
MNOSZ 9954-1951 Instrument parts. Standable parts
MNOSZ 4992-1951 Test table. Testable bending instruments
MNOSZ 9957-1951 Instrument parts. joint tightener
MNOSZ 9969-1951 Instrument parts. iron pliers
MSZ 9968-1957 Instrument parts. drive arm
MSZ 9976-1951 Instrument parts. cylindrical retainer
MNOSZ 10031-1951 Instrument parts. Tighten the bracket
MSZ 9952-1951 Instrument parts. support bracket
MNOSZ 9962-1951 Instrument parts. Arc circumcenter
MNOSZ 9971-1951 Instrument parts tightening nuts
MSZ 9974-1962 Instrument parts produced by machines. skids
MSZ 9964-1951 Instrument parts. Double pressure outer center
MNOSZ 9951-1951 Instrument parts. Built-in latch base
MSZ 9961-1963 Instrument parts produced by machines. outer disk
MNOSZ 9963-1951 Instrument parts. Fork shaped pressure center

SE-SIS

SIS SS 64 12 22-1984 Surveying instruments - Theodolites - Testing - A ccuracy of angular measurement
SIS SS 64 12 21-1984 Surveying instruments - Environmental testing

Society of Automotive Engineers (SAE)

SAE AIR5026B Test Cell Instrumentation
SAE AIR5026 Test Cell Instrumentation
SAE AIR5026B-2014 Test Cell Instrumentation
SAE AIR5026B-2020 Test Cell Instrumentation
SAE AIR5026A Test Cell Instrumentation
SAE J211/1_201403 Instrumentation for Impact Test - Part 1 - Electronic Instrumentation
SAE J211/1_202208 Instrumentation for Impact Test, Part 1 - Electronic Instrumentation
SAE J211/1_199503 Instrumentation for Impact Test-Part 1-Electronic Instrumentation
SAE J211/1_200312 Instrumentation for Impact Test-Part 1-Electronic Instrumentation
SAE J211/1_200707 Instrumentation for Impact Test - Part 1 - Electronic Instrumentation
SAE J211-1-2003 Instrumentation for Impact Test Part 1 Electronic Instrumentation
SAE J211-1-2007 Instrumentation for Impact Test Part 1 Electronic Instrumentation
SAE J211-1-1995 Instrumentation for Impact Test Part 1 Electronic Instrumentation
SAE J211/2_201406 Instrumentation for Impact Test--Part 2: Photographic Instrumentation
SAE J211/1-2003 Instrumentation for Impact Test-Part 1-Electronic Instrumentation
SAE J211/2_200105 Instrumentation for Impact Test--Part 2: Photographic Instrumentation
SAE J211/1-201403 Instrumentation for Impact Test-Part 1-Electronic Instrumentation
SAE J211/1-1995 Instrumentation for Impact Test-Part 1-Electronic Instrumentation
SAE J211/2_202204 Instrumentation for Impact Test--Part 2: Photographic Instrumentation
SAE J211/2-2001 Instrumentation for Impact Test--Part 2: Photographic Instrumentation
SAE J211/1-2007 Instrumentation for Impact Test - Part 1 - Electronic Instrumentation
SAE J211/2_200811 Instrumentation for Impact Test--Part 2: Photographic Instrumentation
SAE J211/1-2014 Instrumentation for Impact Test - Part 1 - Electronic Instrumentation
SAE J211/1-2022 Instrumentation for Impact Test Part 1 - Electronic Instrumentation
SAE J211-2-2014 Instrumentation for Impact Test-Part 2: Photographic Instrumentation
SAE J211-2-2001 Instrumentation for Impact Test Part 2 Photographic instrumentation
SAE J977_196611 Instrumentation for Laboratory Impact Tests
SAE AS16781A Fiber Optics Test Methods and Instrumentation
SAE AS16781 Fiber Optics Test Methods and Instrumentation
SAE J977A_196812 Instrumentation for Laboratory Impact Tests
SAE J211-1970 INSTRUMENTATION FOR BARRIER COLLISION TESTS
SAE AS16781A-2011 Fiber Optics Test Methods and Instrumentation
SAE AS16781-1999 Fiber Optics Test Methods and Instrumentation FSC 9999
SAE AIR1168/5-1990 Aerothermodynamic Test Instrumentation and Measurement
SAE AIR1168/5A Aerothermodynamic Test Instrumentation and Measurement
SAE AIR1168/5 Aerothermodynamic Test Instrumentation and Measurement
SAE ARP1254-2002 1990 Fluidics Test Methods and Instrumentation
SAE ARP1254-1972 FLUIDICS TEST METHODS AND INSTRUMENTATION
SAE J211-1-2014 Instrumentation for Impact Test - Part 1 - Electronic Instrumentation
SAE AIR1168/5-2006 Aerothermodynamic Test Instrumentation and Measurement

International Organization for Standardization (ISO)

ISO 17123-7:2005 Optics and optical instruments - Field procedures for testing geodetic and surveying instruments - Part 7: Optical plumbing instruments
ISO 17123-4:2001 Optics and optical instruments - Field procedures for testing geodetic and surveying instruments - Part 4: Electro-optical distance meters (EDM instruments)
ISO 6487:2015/Amd.1:2017 Road vehicles — Measurement techniques in impact tests — Instrumentation AMENDMENT 1
ISO 17123-1:2002 Optics and optical instruments - Field procedures for testing geodetic and surveying instruments - Part 1: Theory
ISO 17123-1:2010 Optics and optical instruments - Field procedures for testing geodetic and surveying instruments - Part 1: Theory
ISO 17123-1:2014 Optics and optical instruments - Field procedures for testing geodetic and surveying instruments - Part 1: Theory
ISO 17123-4:2012 Optics and optical instruments - Field procedures for testing geodetic and surveying instruments - Part 4: Electro-optical distance meters (EDM measurements to reflectors)
ISO 17123-3:2001 Optics and optical instruments - Field procedures for testing geodetic and surveying instruments - Part 3: Theodolites
ISO 17123-2:2001 Optics and optical instruments - Field procedures for testing geodetic and surveying instruments - Part 2: Levels
ISO 17123-5:2005 Optics and optical instruments - Field procedures for testing geodetic and surveying instruments - Part 5: Electronic tacheometers
ISO 17123-5:2018 Optics and optical instruments - Field procedures for testing geodetic and surveying instruments - Part 5: Total stations
ISO 17123-5:2012 Optics and optical instruments - Field procedures for testing geodetic and surveying instruments - Part 5: Total stations
ISO 9801:1997 Ophthalmic instruments - Trial case lenses
ISO 9801:2009 Ophthalmic instruments - Trial case lenses
ISO 18674-3:2017/Amd 1:2020 Geotechnical investigation and testing — Geotechnical monitoring by field instrumentation — Part 3: Measurement of displacements across a line: Inclinometers — Amendment 1
ISO 6487:2002/Amd 1:2008 Road vehicles - Measurement techniques in impact tests - Instrumentation; Amendment 1
ISO 17123-6:2022 Optics and optical instruments — Field procedures for testing geodetic and surveying instruments — Part 6: Rotating lasers
ISO 17123-6:2003 Optics and optical instruments - Field procedures for testing geodetic and surveying instruments - Part 6: Rotating lasers
ISO 17123-6:2012 Optics and optical instruments - Field procedures for testing geodetic and surveying instruments - Part 6: Rotating lasers
ISO 12858-2:1999/Amd 1:2013 Optics and optical instruments.Ancillary devices for geodetic instruments.Part 2: Tripods; Amendment 1
ISO 9211-4:2006/DAmd 1 Optics and optical instruments — Optical coatings — Part 4: Specific test methods — Amendment 1
ISO 6487:2015/Amd 1:2017 Road vehicles — Measurement techniques in impact tests — Instrumentation — Amendment 1

ISA - International Society of Automation

ISA FUND TST MEAS INSTA-2006 Fundamentals of Test Measurement Instrumentation
ISA TR92.06.03-2008 Feasibility of Chlorine Detection Instrument Testing
ISA TR92.06.03-1999 Feasibility of Chlorine Detection Instrument Testing

PL-PKN

PN M53864-1985 Electrical temperatur? measuring instruments and their accessories Requirements and tests
PN M53421-1961 Measuring Instruments Bench Testing Centres
PN T06565-1972 Microwave measuring Instruments Phase shifters General re?uirements and tests
PN G08011 ArkusZ02-1973 Insulating oxygen apparatus Specifications and testing
PN T06560-1971 Microwave measuring instruments Attenuators General re?uirements and tests

British Standards Institution (BSI)

24/30463844 DC BS ISO 17123-11 Optics and optical instruments - Field procedures for testing geodetic and surveying instruments - Part 11: GNSS instruments
06/30149562 DC IEC 61083-2. Instruments and software used for measurements in high-voltage impulse test. Part 2. Requirements for software
BS ISO 17123-5:2018 Optics and optical instruments. Field procedures for testing geodetic and surveying instruments - Total stations
11/30218527 DC BS ISO 17123-5. Optics and optical instruments. Field procedures for testing geodetic and surveying instruments. Part 5. Total stations
BS EN ISO 9801:2009 Ophthalmic instruments - Trial case lenses
BS EN ISO 9801:1997 Ophthalmic instruments - Trial case lenses
BS EN ISO 9801:2010 Ophthalmic instruments. Trial case lenses
BS ISO 17123-9:2018 Optics and optical instruments. Field procedures for testing geodetic and surveying instruments - Terrestrial laser scanners
24/30482132 DC BS ISO 17123-6 Optics and optical instruments — Field procedures for testing geodetic and surveying instruments - Part 6: Rotating lasers
11/30211367 DC BS ISO 17123-4. Optics and optical instruments. Field procedures for testing geodetic and surveying instruments. Part 4. Electro-optical distance meters (EDM measurements to reflectors)
BS EN 61143-2:1994(2000) Specification for Electrical measuring instruments — X - t recorders — Part 2 : Recommended additional test methods
21/30393812 DC BS ISO 17123-6. Optics and optical instruments. Field procedures for testing geodetic and surveying instruments. Part 6. Rotating lasers
11/30217467 DC BS ISO 17123-6. Optics and optical instruments. Field procedures for testing geodetic and surveying instruments. Part 6. Rotating lasers
BS ISO 17123-6:2022 Optics and optical instruments. Field procedures for testing geodetic and surveying instruments - Rotating lasers
08/30193653 DC BS ISO 17123-1. Optics and optical instruments. Field procedures for testing geodetic and surveying instruments. Part 1. Theory
11/30218530 DC BS ISO 16331-1. Optics and optical instruments. Laboratory procedures for testing surveying and construction instruments. Part 1. Performance of handheld laser distance meters
BS ISO 14997:2003 Optics and optical instruments. Test methods for surface imperfections of optical elements
BS EN ISO 4787:2011 Laboratory glassware. Volumetric instruments. Methods for testing of capacity and for use

American National Standards Institute （ANSI)

ANSI N323C-2009 Radiation Protection Instrumentation Test and Calibration - Air Monitoring Instruments
ANSI N323ab-2014 Radiation Protection Instrumentation Test and Calibration, Portable Survey Instruments
ANSI N323-1978(R1991) Radiation Protection Instrumentation Test and Calibration
ANSI N323A-1997 Radiation Protection Instrumentation Test and Calibration - Portable Survey Instruments
ANSI N323A/B-2013 Radiation Protection Instrumentation Test and Calibration, Portable Survey Instruments
ANSI N323AB-2013 (Revision and Redesignation of ANSI N323A-1997 and ANSI N323B-2002) American National Standard for Radiation Protection Instrumentation Test and Calibration, Portable Survey Instruments

Indonesia Standards

SNI 04-3874-1995 Testing equipment of electric energy meters
SNI 12-3812-1995 Strike test instrument for badminton ball
SNI 12-4247-1996 Abrasion resistance testing instrument for basket ball
SNI 12-3813-1995 Reflect test instrument for ball

Institute of Electrical and Electronics Engineers (IEEE)

IEEE N323A ERTA-2004 Radiation Protection Instrumentation Test and Calibration@ Portable Survey Instruments
IEEE N323AB-2013 Radiation Protection Instrumentation Test and Calibration@ Portable Survey Instruments
IEEE Std N323C-2009 (New Standard) American National Standard for Radiation Protection Instrumentation Test and Calibration - Air Monitoring Instruments
IEEE Std N323C-2009 American National Standard for Radiation Protection Instrumentation Test and Calibration - Air Monitoring Instruments
IEEE/ANSI N323AB-2013 American National Standard for Radiation Protection Instrumentation Test and Calibration, Portable Survey Instruments
IEEE/ANSI N323A-1997 American National Standard Radiation Protection Instrumentation Test and Calibration, Portable Survey Instruments

VN-TCVN

TCVN 1050-1971 Testing glasswares.Grinding cones of tapping angle 1:10.Dimension of the grinding part

Japanese Industrial Standards Committee (JISC)

JIS B 7912-5:2016 Field procedures for testing geodetic and surveying instruments -- Part 5: Total stations
JIS B 7612-2:2008 Load Cells for Weighing Instruments -- Part 2: Digital Load Cells
JIS B 7912-1:2014 Optics and optical instruments.Field procedures for testing geodetic and surveying instruments.Part 1: Theory
JIS B 7912-4:2016 Field procedures for testing geodetic and surveying instruments -- Part 4: Electro-optical distance meters (EDM measurements to reflectors)
JIS C 1731-2:1998 Instrument transformers for testing purpose and used with general instrument Part 2: Voltage transformers
JIS C 1731-1:1998 Instrument transformers for testing purpose and used with general instrument Part 1: Current transformers
JIS B 1758:2013 Acceptance tests for gear measuring instruments
JIS K 2839:1990 Glasswares for testing apparatus of petroleum products
JIS C 1216-2 AMD 1:2014 Alternating-current watt-hour meters (for connection through instrument transformer) -- Part 2: Measuring instruments used in transaction or certification (Amendment 1)

South African Bureau of Standard

SANS 61034-1:2006 Measurement of smoke density of cables burning under defined conditions Part 1: Test apparatus

IN-BIS

IS 12554 Pt.1-1988 Specification for non-destructive coating thickness testing instruments Part 1 Eddy current instruments
IS 3222 Pt.1-1966 Specification for instrument screws Part Ⅰ Fasteners for drawing instruments
IS 1248 Pt.9-1983 Specification for direct-action indicating analog electrical measuring instruments and their accessories Part 9 Test methods
IS 1248 Pt.7-1984 Specification for direct-acting indicating analog electrical measuring instruments and their accessories Part 7 Multifunctional instruments

European Committee for Electrotechnical Standardization（CENELEC）

EN 61083-1:2001 Instruments and Software Used for Measurement in High-Voltage Impulse Tests - Part 1: Requirements for Instruments
EN 61143-2:1994 Electrical Measuring Instruments - X-t Recorders Part 2: Recommended Additional Test Methods (Incorporates Amendment A1: 1995)
EN 61083-2:2013 Instruments and software used for measurement in high-voltage and high-current tests - Part 2: Requirements for software for tests with impulse voltages and currents
EN IEC 61083-3:2021 Instruments and software used for measurement in high-voltage and high-current tests - Part 3: Requirements for hardware for tests with alternating and direct voltages and currents

Ente Nazionale Italiano di Unificazione

UNI EN ISO 10341:2009 Ophthalmic instruments - Refractor heads
UNI EN ISO 10341:2013 Ophthalmic instruments - Refractor heads
UNI 7008:1971 Measuring instruments. Handles for gauging members with taper shaft.
UNI EN ISO 13696:2002 Optics and optical instruments - Test methods for radiation scattered by optical components

Gosstandart of Russia

GOST R ISO 17123-4-2011 State system for ensuring the uniformity of measurements. Optics and optical instruments. Field procedures for testing geodetic and surveying instruments. Part 4. Elektro-optical distance meters (EDM instruments)
GOST 29283-1992 Semiconductor devices. Discrete devices and integrated circuits. Part 5. Optoelectronic devices
GOST R ISO 17123-7-2011 State system for ensuring the uniformity of measurements. Optics and optical instruments. Field procedures for testing geodetic and surveying instruments. Part 7. Optical plumbing instruments
GOST R ISO 17123-5-2011 State system for ensuring the uniformity of measurements. Optics and optical instruments. Field procedures for testing geodetic and surveying instruments. Part 5. Electronic tacheometers
GOST R ISO 12156-1-2006 Diesel fuel. Determination of lubricity by the HFRR-apparatus. Part 1. Test method
GOST R 53518-2009 Ophtnalmic instruments. Part 1. General requirements applicable to all ophthalmic instruments and test methods
GOST R ISO 17123-2-2011 State system for ensuring the uniformity of measurements. Optics and optical instruments. Field procedures for testing geodetic and surveying instruments. Part 2. Levels
GOST R ISO 17123-3-2011 State system for ensuring the uniformity of measurements. Optics and optical instruments. Field procedures for testing geodetic and surveying instruments. Part 3. Theodolites

AT-ON

ONORM E 1364-1971 Apparatus for pressure lest on shrouds.

United States Navy

NAVY MIL-S-81963 B-1990 SERVOCOMPONENTS, PRECISION INSTRUMENT, ROTATING, COMMON REQUIREMENTS AND TESTS, GENERAL SPECIFICATION FOR
NAVY MIL-H-21155 D-1990 HARDWARE: FOR BELT, MILITARY POLICE

CZ-CSN

CSN 35 6201-1961 Electrical measuring instruments and their accessories
CSN ON 35 6208-1968 Electrical measuring instruments and accessories for climate control technology (climate testing)
CSN 35 6505-1990 Electronic measuring instruments. General technical conditions

U.S. Air Force

AIR FORCE A-A-59939-2013 Testing Kit, Petroleum, Fuel Oxidation Tester

European Committee for Standardization (CEN)

EN ISO 9801:2009 Ophthalmic instruments - Trial case lenses (ISO 9801:2009)

VE-FONDONORMA

NORVEN 45-1-1960 Testing equipment for fur

American Society for Testing and Materials (ASTM)

ASTM E2439-09(2016) Standard Guide for Instrumentation, Sensors and Operating Software Used in Forensic Psychophysiological Detection of Deception (Polygraph) Examinations
ASTM E2439-05 Standard Guide for Instrumentation, Sensors and Operating Software Used in Forensic Psychophysiological Detection of Deception (Polygraph) Examinations
ASTM STP 554-1974 Rock mass field testing and instrumentation
ASTM RR-E28-1045 2015 E2546-Practice for Instrumented Indentation Testing

JP-JEC

JEC 0221-2007 INSTRUMENTS USED FOR MEASUREMENTS IN IMPULSE VOLTAGE AND CURRENT TESTS Requirement for instruments

ITU-T - International Telecommunication Union/ITU Telcommunication Sector

HDBK VOL IX TMM-1989 Testing Methods and Measuring Apparatus (Volume IX)

IET - Institution of Engineering and Technology

DIG ANLG INSTR-2003 Digital and Analogue Instrumentation: testing and measurement

BE-NBN

NBN-EN 60051-6-1994 Direct acting indicating analogue electrical measuring instruments and their accessories Part 6: Special requirements for ohmmeters (impedance meters) and conductance meters

American Society of Mechanical Engineers (ASME)

ASME PTC 19.1-1998(R2004) Test Uncertainty - Instruments and Apparatus