Electron microscope sample preparation concentration

Electron microscope sample preparation concentration, Total:94 items.

The international standard classification for "Electron microscope sample preparation concentration" includes: Medical Sciences and health care facilities in general , Optical equipment .

The Chinese standard classification for "Electron microscope sample preparation concentration" includes: Radiological sanitation protection , Electron optics and other physical optics instrument .

未注明发布机构

ASTM RR-D19-1162 1998 D3977-Test Methods for Determining Sediment Concentration in Water Samples

Taiwan Provincial Standard of the People's Republic of China

CNS 11018-1984 Method of Preparing Coal Samples for Microscopical Analysis by Reflected Light

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 16146-1995 Control standard of radon concentration in dwellings
GB/T 18735-2002 General specification of nanometer thin STANDARD specimen for analytical transmission electron microscopy (AEM/EDS)

工业和信息化部

HG/T 6000-2022 Electromagnetic acid-base concentration meter

Group Standards of the People's Republic of China

T/QGCML 2265-2023 Pressure swing adsorption system for compressed natural gas produced by concentrating low-concentration coalbed methane
T/QGCML 2264-2023 Safe transportation system for compressed natural gas produced by concentrating low-concentration coalbed methane
T/QGCML 2266-2023 Low-concentration coalbed methane concentration to produce compressed natural gas cooling tower system
T/QGCML 2267-2023 Low-concentration coalbed methane concentration to produce compressed natural gas compression and purification system
T/QGCML 2268-2023 Low-concentration coalbed methane enrichment and compressed natural gas compression system
T/QGCML 2269-2023 Low-concentration coalbed methane enrichment to compressed natural gas automation system

Professional Standard - Aviation

HB 6247.5-1989 Basic product drawing management system (instrument, electrical specialty) Drawing requirements for drawings
HB 5615-1981 Basic product drawing management system (motor and electrical major)

Professional Standard - Petroleum

SY 5162-2014 Scanning Electron Microscopy Analysis Method for Rock Samples
SY/T 5162-2014 Analytical method of rock sample by scanning electron microscope
SY/T 5162-1997 Analytical Method of Rock Sample by Scanning Electron Microscope

国家能源局

SY/T 5162-2021 Analytical method for rock samples by scanning electron microscope

Professional Standard - Energy

NB/T 20031-2010 Control of Hydrogen Concentration in the Containment after Accidents in Nuclear Power Plants of Pressurized Water Reactor

Military Standard of the People's Republic of China-General Armament Department

GJB 8684.22-2015 Test methods for pyrotechnic properties - Part 22: Determination of smoke solid particle number concentration by electron microscopy

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence

GJB 5384.22-2005 Test methods of performance for pyrotechnic composition Part 21: Concentration determination of solid smoke particles quantities Electron microscope method

American Society for Testing and Materials (ASTM)

ASTM D6480-05(2010) Standard Test Method for Wipe Sampling of Surfaces, Indirect Preparation, and Analysis for Asbestos Structure Number Concentration by Transmission Electron Microscopy
ASTM D5756-95 Standard Test Method for Microvacuum Sampling and Indirect Analysis of Dust by Transmission Electron Microscopy for Asbestos Mass Concentration
ASTM D5756-02 Standard Test Method for Microvacuum Sampling and Indirect Analysis of Dust by Transmission Electron Microscopy for Asbestos Mass Concentration
ASTM D5755-02 Standard Test Method for Microvacuum Sampling and Indirect Analysis of Dust by Transmission Electron Microscopy for Asbestos Structure Number Concentrations
ASTM D5755-95 Standard Test Method for Microvacuum Sampling and Indirect Analysis of Dust by Transmission Electron Microscopy for Asbestos Structure Number Concentrations
ASTM D3977-97(2013) Standard Test Methods for Determining Sediment Concentration in Water Samples
ASTM D3997-97(2004) Standard Practice for Preparing Coke Samples for Microscopical Analysis by Reflected Light
ASTM D2797/D2797M-09 Standard Practice for Preparing Coal Samples for Microscopical Analysis by Reflected Light
ASTM D3997-97 Standard Practice for Preparing Coke Samples for Microscopical Analysis by Reflected Light
ASTM D3977-97(2013)e1 Standard Test Methods for Determining Sediment Concentration in Water Samples
ASTM D3977-97(2019) Standard Test Methods for Determining Sediment Concentration in Water Samples
ASTM D6582-00(2005) Standard Guide for Ranked Set Sampling: Efficient Estimation of a Mean Concentration in Environmental Sampling
ASTM D6582-00 Standard Guide for Ranked Set Sampling: Efficient Estimation of a Mean Concentration in Environmental Sampling
ASTM D6582-00(2005)e1 Standard Guide for Ranked Set Sampling: Efficient Estimation of a Mean Concentration in Environmental Sampling
ASTM D6056-96(2011) Standard Test Method for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment by Transmission Electron Microscopy

CU-NC

NC 44-07-1986 Ores. Gobalt and Nickel Sulfide Concentrate. Sampling

CH-SNV

VSM 33936-1974 test. Concentration limits

RU-GOST R

GOST 15113.0-1977 Food concentrates. Rules of acceptance, sampling and preparation of samples
GOST R ISO 10396-2006 Stationary source emissions. Sampling for the automated determination of gas concentrations

GOST

GOST R ISO 14966-2022 Ambient air. Determination of numerical concentration of inorganic fibrous particles. Scanning electron microscopy method

Association Francaise de Normalisation

NF X43-050:2021 Air quality - Determination of the asbestos fiber concentration by transmission electron microscopy - Indirect method
NF M60-412:1998 Requirements for representative sampling of uranyl nitrate solutions for the determination of uranium concentration.
NF X43-269:2017 Air quality - Air in workplaces - Membrane filter sampling for determination of fiber number concentration using microscopy techniques: MOCP, MEBA and META - Counting by MOCP

SCC

AS 2061:1989 Preparation of coal samples for incident light microscopy
UNE 77218:1996 STATIONARY SOURCE EMISSIONS. SAMPLING FOR THE AUTOMATED DETERMINATION OF GAS CONCENTRATIONS
BS EN 1948-1:1997 Stationary source emissions. Determination of the mass concentration of PCDDs/PCDFs-Sampling
NS-EN 16339:2013 Ambient air — Method for the determination of the concentration of nitrogen dioxide by diffusive sampling
DANSK DS/EN 16339:2013 Ambient air - Method for the determination of the concentration of nitrogen dioxide by diffusive sampling
VDI 2119-2013 Measuring immissions — Sampling of atmospheric particles > 2.5 µm on an acceptor surface with the passive sampler Sigma-2 — Light microscopic characterization and calculation of the number sedimentation rate and the mass concentration
AWPA A46-20 Standard Method for Determining MCS Concentration in EL2 Treatment Solution Samples by Turbidity Measurement
UNE-EN 1948-1:1997 STATIONARY SOURCE EMISSIONS. DETERMINATION OF THE MASS CONCENTRATION OF PCDDS/PCDFS. PART 1: SAMPLING.
NS-EN 1948-1:1996 Stationary source emissions — Determination of the mass concentration of PCDDs/PCDFs — Part 1: Sampling
AWWA WQTC56964 Assessment of the Effects of Holding Time and Temperature on E. coli Concentrations in Surface Water Samples

Standard Association of Australia （SAA）

AS 2884.4:1997 Heavy mineral sand concentrates - Sampling - Determination of precision and bias
AS 2856.1:2000(R2013) Preparation of coal samples for incident light microscopy of coal petrography
AS/NZS 2891.14.5:1999 Methods of sampling and testing asphalt - Field density tests - Density ratio of compacted asphalt
AS 2636:1994 Sampling of venous and capillary blood for the determination of lead or cadmium concentration
AS 2856.1:2000 Coal petrography - Preparation of coal samples for incident light microscopy

British Standards Institution (BSI)

BS ISO 14966:2019 Ambient air. Determination of numerical concentration of inorganic fibrous particles. Scanning electron microscopy method
BS ISO 14966:2002 Ambient air - Determination of numerical concentration of inorganic fibrous particles - Scanning electron microscopy method
18/30375050 DC BS ISO 14966. Ambient air. Determination of numerical concentration of inorganic fibrous particles. Scanning electron microscopy method
BS ISO 13271:2012 Stationary source emissions. Determination of PM10/PM2,5 mass concentration in flue gas. Measurement at higher concentrations by use of virtual impactors
BS EN 16339:2013 Ambient air. Method for the determination of the concentration of nitrogen dioxide by diffusive sampling
BS EN ISO 16000-7:2007 Indoor air. Sampling strategy for determination of airborne asbestos fibre concentrations

International Organization for Standardization (ISO)

ISO 14966:2019 Ambient air — Determination of numerical concentration of inorganic fibrous particles — Scanning electron microscopy method
ISO 14966:2002 Ambient air - Determination of numerical concentration of inorganic fibrous particles - Scanning electron microscopy method
ISO 13271:2012 Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Measurement at higher concentrations by use of virtual impactors
ISO 14966:2002/cor 1:2007 Ambient air - Determination of numerical concentration of inorganic fibrous particles - Scanning electron microscopy method; Technical Corrigendum 1
ISO 11598:1995 Requirements for representative sampling of uranyl nitrate solutions for the determination of uranium concentration
ISO 10396:1993 Stationary source emissions; sampling for the automated determination of gas concentrations

GSO

GSO ISO 12744:2014 Copper, lead, zinc and nickel concentrates -- Experimental methods for checking the precision of sampling
GSO ISO 12803:2013 Representative sampling of plutonium nitrate solutions for determination of plutonium concentration
GSO ISO 11790:2015 Copper, lead, zinc and nickel concentrates -- Guidelines for the inspection of mechanical sampling systems
OS GSO ISO 12803:2013 Representative sampling of plutonium nitrate solutions for determination of plutonium concentration

American National Standards Institute （ANSI)

ANSI/ASTM D6056:2001 Test Method for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment by Transmission Electron Microscopy
ANSI/ASTM D6059:2001 Test Method for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment by Scanning Electron Microscopy

HU-MSZT

MSZ 14352-1978 Sample collection and concentration detection of radioactive suspended particles

RO-ASRO

STAS SR ISO 10275-1:1997 PI aste rs - General specification sample preparing, preparation of normal consistency paste and determination of white degree

Indonesia Standards

SNI 13-4120-1996 Method for sampling and preparation of non ferrous flotation concentrate

PL-PKN

PN H87903-1972 Irwestigations o? copper alloys castings Preparation and sampling ot ?es? pieces for microscopis examinations
PN Z04112-06-1990 Air purity protection Tests for vinyl chloride Determination of vinyl chloride in ambient air (immission) by gas chromatography with sample enrichment

VN-TCVN

TCVN 4940-1989 Metal cutting machines.Methods for control of concentration
TCVN 6157-1996 Ambient air.Determination of the mass concentration of ozone.Chemiluminescence method

German Institute for Standardization

DIN EN 16339:2013-11 Ambient air - Method for the determination of the concentration of nitrogen dioxide by diffusive sampling; German version EN 16339:2013
DIN EN 16339:2023 Ambient air - Method for the determination of the concentration of nitrogen dioxide by diffusive sampling; German and English version prEN 16339:2023
DIN 58932-1:2012 Haematology - Determination of the concentration of blood corpuscles in blood - Part 1: Blood collection, sample preparation, biological influence factors, interference factors; Text in German and English
DIN 58932-1:1996 Haematology - Determination of the concentration of blood corpuscles in blood - Part 1: Blood collection, sample preparation, biological influence factors, interference factors

U.S. Military Regulations and Norms

ARMY MIL-DTL-46193 A-1998 ARMOR PLATE, CONTROL ROLLED, STEEL, WROUGHT, HIGH STRENGTH, HIGH QUALITY

European Committee for Standardization (CEN)

EN 16339:2013 Ambient air - Method for the determination of the concentration of nitrogen dioxide by diffusive sampling

Danish Standards Foundation

DS/EN 16339:2013 Ambient air - Method for the determination of the concentration of nitrogen dioxide by diffusive sampling

YU-JUS

JUS ISO 498:1994 Natural rubber latex concentrate -Preparation of dry films

National Electrical Manufacturers Association（NEMA)

NEMA LL 3-1999 Procedures for High-Intensity Discharge Lamp Sample Preparation and the TCLP

AENOR

UNE-EN 16339:2014 Ambient air - Method for the determination of the concentration of nitrogen dioxide by diffusive sampling

NEMA - National Electrical Manufacturers Association

NEMA LL 3-1997 Procedures for High-Intensity Discharge Lamp Sample Preparation and the TCLP