volume reagent

volume reagent, Total:260 items.

The international standard classification for "volume reagent" includes: Other methods of testing of metals , Chemical reagents , Solvents , Refrigerating technology , Thermoplastic materials , Other products of the chemical industry , Radiographic equipment , Surface active agents , Ceramics in general .

The Chinese standard classification for "volume reagent" includes: Furniture in general , Chemical reagent in general , Chemical additive , Basic standards and general methods for synthetic resin and plastic , Basic standards and general methods for catalyst , Refrigeration equipment , Medical radiographic equipment , Basic standards and general methods for surface active agent , Tooth paste, soap and detergent , Daily use ceramics products .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 2922-1982 Chemical reagents--Determination of specific surface area of solid supports used in chromatography
GB/T 13175-1991 Determination of apparent density of powdered detergent. Method by measuring the mass of a given volume
GB/T 31522-2015 Matrix to superconductor volume ratio measurement―Copper to non-copper volume ratio of Nb 3Sn composite superconducting wires
GB/T 20012-2005 Medical electrical equipment. Dose area product meters
GB/T 34619-2017 Test method for volumetric flow of positive displacement refrigerant compressors
GB/T 8324-1987 Test method for bulk factor of moulding materials
GB 2922-1982 Test method for specific surface area of chromatographic carrier for chemical reagents
GB/T 41737-2022 Aluminum matrix composites-Test method for volume fraction of SiC-Dissolution method
GB/T 5773-2016 The method of performance test for positive displacement refrigerant compressors
GB/T 6373-2003 Surface active agents--Determination of apparent density--Method by measuring the mass of a given volume
GB/T 1672-1988 plasticizers; Determination of volume resistivity
GB/T 38691-2020 Testing method for specific surface area of petroleum refining catalysts
GB/T 606-2003 Chemical reagent - General method for the determination of water - Karl Fischer method
GB/T 11985-1989 Surface active agents--Determination of interfacial tension--Drop volume method
GB/T 5773-2004 The method of performance test for positive displacement refrigerant compressors

未注明发布机构

FORD FLTM BV 108-1-2000 VOLUME CHANGE OF SEALERS (Replaces FLTM BV 008-01, FLTM EU-BV 008-01)
FORD FLTM BV 108-2-2000 VOLUME CHANGE TEST FOR ADHESIVES AND SEALANTS (Replaces FLTM BV 008-02)
FORD FLTM BV 108-02-2000 VOLUME CHANGE TEST FOR ADHESIVES AND SEALANTS Replaces FLTM BV 008-02 [Replaced: FORD FLTM BV 008-02]

Professional Standard - Energy

NB/SH/T 0955-2017 Standard test method for pore volume of catalytic cracking catalysts by water titration
NB/SH/T 0958-2017 Standard test method for mechanically tapped packing density of formed catalyst and catalyst carriers
NB/SH/T 0571-2021 Standard test method for determining microspore volume and zeolite area of a catalyst

Professional Standard - Petrochemical Industry

SH/T 0958-2017 Determination of bulk density of shaped catalysts and catalyst carriers by mechanical tapping
SH/T 0955-2017 Water droplet method for determination of pore volume of catalytic cracking catalysts

Professional Standard - Military and Civilian Products

WJ 2018-1991 Test method for electrostatic accumulation of pyrotechnic agents

National Metrological Technical Specifications of the People's Republic of China

JJF 1479-2014 Calibration Specification for Dose Area Product Meters

Taiwan Provincial Standard of the People's Republic of China

CNS 14925-2005 Wood - Determination of volumetric shrinkage
CNS 14927-2005 Wood - Determination of volumetric swelling

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 5773-2004(XG1-2012) The method of performance test for positive displacement refrigerant compressors

Professional Standard - Education

JY 62-1980 Circle area demonstrator, cylinder volume demonstrator, cylinder cone volume

Professional Standard - Automobile

QC/T 434-1999 Test method for ceramic insulators of spark plugs - Test method for volume density

Professional Standard - Machinery

JB/T 9588.3-1999 Test method for ceramic insulators of spark plug.Test method for volume density

Professional Standard - Light Industry

QB/T 1642-1992 Test Method for Apparent Porosity and Bulk Density of Ceramic Body
QB/T 1642-2012 Test method for apparent porosity and bulk density of ceramic body

Professional Standard - Petroleum

SY/T 5798-1993 Evaluation method for wax inhibitors in crude oil Wax deposition tester method

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence

GJB 5891.8-2006 Test method of loading material for initiating explosive device Part 8: Electrostatic accumulation test

YU-JUS

JUS H.G8.124-1984 Reagents. Ammonia solution. Determination af ammonia content. Volumetric method
JUS H.G8.505-1991 Reagents. Formic acid. Determination of acetic acid content. Volumetric method
JUS H.G8.499-1991 Reagents. Formic acid. Determination of formic acid content. Volumetric method
JUS H.G8.307-1987 Reagents. Copper(l) cyanide. Determination of coppercontent Volumetric method
JUS H.G8.077-1983 Reagents. Sodium chloride. Determination ofsodium chloride content. Volumetric method
JUS H.G8.428-1990 Reagents. Potassium iodide. Determination of potassium iodide content. Volumetric method
JUS H.G8.098-1984 Reagents. Potassium chloride. Determination of potassium chloride content. Volumetric method
JUS H.G8.503-1991 Reagents. Formic acid. Determination of sulphites content. Volumetric method
JUS H.G8.452-1991 Reagents. Potassium sulpbate. Determination of potassium sulphate content. Volumetric method
JUS H.G8.041-1982 Reagents. Si Iver nitrate. Determination of silver nitrate content. Volumetnc method\
JUS H.G8.320-1988 Pure chemicals (+)-tartaric acid DETERMINATION OF TARTAR ACID CONTENT Volumetric method
JUS H.G8.139-1985 Peagents. Ammonium sulphate. Determination of ammonium sulphatecontent Volumetric method
JUS H.G8.328-1987 Reagents. Ammonium acetate. Determination of ammonium acetate content. Volumetric method
JUS H.G8.442-1990 Reaaents. Potassium iodide. Determination of iodine-reducinq substances (J). Volumetric method
JUS H.G8.472-1991 Reacjents. Orthophosphpric acid. Determination of orthophosphoric acid content. Volumetric method
JUS H.G8.192-1985 Reagents. Ammonium chloride. Determination of ammonium chloride content. Volumetric method
JUS H.G8.284-1987 Reagents. Copper(ll) oxide. Determination ofcopper(ll) oxide content. Volumetric method
JUS H.G8.050-1983 Reagents, Hydrogen peroxide. Determination of hydrogen peroxide content. Volumetric method
JUS H.G8.351-1989 Reagents. Acetone- Determinatioti of free alkali content (as NH~) . Volunetri c method
JUS H.G8.485-1991 Reagents. Potassium perraangar.ate. Determination of potassium permanganate content. Volumetric method
JUS H.G8.350-1989 Reagents. Acetone. Determination of free acid content (as CH_C00H). Volumetric method
JUS H.G8.210-1985 Reagents. Methanct. Determination of free acidcontent (as HCOOH). Volumetric method
JUS H.G8.052-1983 Reagents. Hydrogen peroxide. Determination of free acid content (as H2SO^). Volumetric method
JUS H.G8.211-1985 Reagents. Methanol. Determination of freealkalicontent !asNH3j. Volumetricmethod
JUS H.G8.293-1987 Reagents. Oxalic acid dihydrats. Determination ofoxalic and dihydrate content. Volumetric method
JUS H.G0.008-1991 Reagents. Preparation and storage of indicator solutions for chemical (volumetric) analysis
JUS H.G8.352-1989 Reaaents. Acetone. De termina ti. on of permaneanate-reducing substances content. Volumetric inethod
JUS H.G8.341-1988 Reagents. Zine cbloride. Deterainaticm of -zine oxide chloride ctmteut. Volumctric method
JUS H.G8.337-1987 Reagents. Ammonium acetate. Determination of permanganate reducing substances content Volumetric method
JUS H.G8.479-1991 Reagents. Orthophosphoric acid. Determination of volatile acids content (as CH COOH). Volumetric method
JUS H.G8.301-1987 Reagents. Silver cyanide and potassium dicyanoargentate. Determination of silver content. Volumetric method
JUS H.G8.038-1981 Reagents. Sulphuric acid. Determination ofpermanganate reducing substances content. Volumetric met- hod
JUS H.G8.480-1991 Pure chemicals Orthophosphoric acid DETERMINATION OF SUBSTANCES THAT REDUCE POTASSIUM-PERMANGANATE (as HPO3) Volumetric method
JUS H.G8.213-1985 eagents. Meihanol. Determination ofpermanganate reducing substances content. Volumetric method
JUS H.G8.410-1991 Reagents. Sodium hvdroxide. Determination of sodium hvdroxide and carbonate contents. Volumetric method
JUS H.G8.509-1991 Reagents. Potassium hydroxide. Determination of potassium hydroxide and carbonate contents. Volumetric method
JUS H.G8.111-1984 Reagents. Citric acid monohydrate. Determination of citric acid monohydrate content. Volumetric method
JUS H.G8.136-1984 Reagents. Ammonia solution. Determination of permanganate reducing substances content. Volumetric ethod
JUS H.G8.381-1989 Reagents. Sodium acetate trihydrate. Determination of permanganate reducing substances content. Volumetric method
JUS H.G8.067-1983 Reagents. Boric acid. Determination of boric acid content. Volumetric method
JUS H.B8.272-1983 Formaldehyde solutions for industrial use. Determination of acidity (as HCOOH). Volumetric method
JUS H.G8.152-1984 Reagents. Sodium carbonate anhydrous and sodium carbonate decahydrate. Determination of sodium carbonate and sodium carbonate decahydrate contents. Volumetric method
JUS H.G8.061-1983 Reagents. Copper sulphate pentahydrate. Determination of sulphate pentahydrate content. Volumetric method
JUS H.B8.270-1983 Formaldehyde solutions for industrial use. Determination formatdehydo content. Vokimetrk method
JUS H.G8.274-1987 Reagents. Iron(ll) sulphate heptahydrate. Determination of iron(ll) sulphate heptahydrate content. Vo- lumetric method
JUS H.C8.211-1989 Pigments and extenders. Determination of massie volume and apparent densitv after tamping

American Society for Testing and Materials (ASTM)

ASTM RR-D32-1009 1984 D4365-Test Method for Determining Micropore Volume and Zeolite Area of a Catalyst
ASTM D6761-17 Standard Test Method for Determination of the Total Pore Volume of Catalysts and Catalyst Carriers
ASTM RR-D32-1039 2002 D6761-Test Method for Determination of the Total Pore Volume of Catalysts and Catalyst Carriers
ASTM D6761-07(2012) Standard Test Method for Determination of the Total Pore Volume of Catalysts and Catalyst Carriers
ASTM D6761-22a Standard Test Method for Determination of the Total Pore Volume of Catalysts and Catalyst Carriers
ASTM D4365-25 Standard Test Method for Determining Micropore Volume and Zeolite Area of a Catalyst
ASTM D6761-22 Standard Test Method for Determination of the Total Pore Volume of Catalysts and Catalyst Carriers
ASTM C733-93 Standard Test Method for Volume Shrinkage of Latex Sealants
ASTM D4365-13 Standard Test Method for Determining Micropore Volume and Zeolite Area of a Catalyst
ASTM D4365-95(2008) Standard Test Method for Determining Micropore Volume and Zeolite Area of a Catalyst
ASTM D6761-07 Standard Test Method for Determination of the Total Pore Volume of Catalysts and Catalyst Carriers
ASTM D3663-20 Standard Test Method for Surface Area of Catalysts and Catalyst Carriers
ASTM D3663-03(2015) Standard Test Method for Surface Area of Catalysts and Catalyst Carriers
ASTM D3663-03 Standard Test Method for Surface Area of Catalysts and Catalyst Carriers
ASTM D3663-03(2008) Standard Test Method for Surface Area of Catalysts and Catalyst Carriers
ASTM D6761-04 Standard Test Method for Determination of the Total Pore Volume of Catalysts and Catalyst Carriers
ASTM D7084-18 Standard Test Method for Determination of Bulk Crush Strength of Catalysts and Catalyst Carriers
ASTM D7084-04(2017) Standard Test Method for Determination of Bulk Crush Strength of Catalysts and Catalyst Carriers
ASTM D6761-04a Standard Test Method for Determination of the Total Pore Volume of Catalysts and Catalyst Carriers
ASTM D4365-19 Standard Test Method for Determining Micropore Volume and Zeolite Area of a Catalyst
ASTM D2739-97(2017) Standard Test Method for Volume Resistivity of Conductive Adhesives
ASTM D2739-97(2025) Standard Test Method for Volume Resistivity of Conductive Adhesives
ASTM D2739-97(2004) Standard Test Method for Volume Resistivity of Conductive Adhesives
ASTM D2739-97(2010) Standard Test Method for Volume Resistivity of Conductive Adhesives
ASTM D4284-12 Standard Test Method for Determining Pore Volume Distribution of Catalysts and Catalyst Carriers by Mercury Intrusion Porosimetry
ASTM D899-00 Standard Practice for Applied Weight Per Unit Area of Liquid Adhesive
ASTM RR-C24-1044 1994 C1241-Test Method for Volume Shrinkage of Latex Sealants During Cure
ASTM D4284-12(2017)e1 Standard Test Method for Determining Pore Volume Distribution of Catalysts and Catalyst Carriers by Mercury Intrusion Porosimetry
ASTM D899-00(2007) Standard Practice for Applied Weight Per Unit Area of Liquid Adhesive
ASTM D898-05 Standard Test Method for Applied Weight Per Unit Area of Dried Adhesive Solids
ASTM C1241-14(2022) Standard Test Method for Volume Shrinkage of Latex Sealants During Cure
ASTM D898-96 Standard Test Method for Applied Weight Per Unit Area of Dried Adhesive Solids
ASTM D4164-24 Standard Test Method for Mechanically Tapped Packing Density of Formed Catalyst and Catalyst Carriers
ASTM C1241-00(2005) Standard Test Method for Volume Shrinkage of Latex Sealants During Cure
ASTM D4365-95(2001) Standard Test Method for Determining Micropore Volume and Zeolite Area of a Catalyst
ASTM D4365-95 Standard Test Method for Determining Micropore Volume and Zeolite Area of a Catalyst
ASTM D4365-95(2007)e1 Standard Test Method for Determining Micropore Volume and Zeolite Area of a Catalyst
ASTM D4781-03(2008) Standard Test Method for Mechanically Tapped Packing Density of Fine Catalyst Particles and Catalyst Carrier Particles
ASTM D4781-03(2013) Standard Test Method for Mechanically Tapped Packing Density of Fine Catalyst Particles and Catalyst Carrier Particles
ASTM UOP762-76 Apparent Bulk Density of Solid Phosphoric Acid Catalyst
ASTM D4164-13 Standard Test Method for Mechanically Tapped Packing Density of Formed Catalyst and Catalyst Carriers
ASTM D4164-13(2018) Standard Test Method for Mechanically Tapped Packing Density of Formed Catalyst and Catalyst Carriers
ASTM D4222-03(2008) Standard Test Method for Determination of Nitrogen Adsorption and Desorption Isotherms of Catalysts and Catalyst Carriers by Static Volumetric Measurements
ASTM D4781-24 Standard Test Method for Mechanically Tapped Packing Density of Fine Catalyst Particles and Catalyst Carrier Particles
ASTM D4780-23 Standard Test Method for Determination of Low Surface Area of Catalysts and Catalyst Carriers by Multipoint Krypton Adsorption
ASTM C1876-24 Standard Test Method for Bulk Electrical Resistivity or Bulk Conductivity of Concrete
ASTM C1876-23 Standard Test Method for Bulk Electrical Resistivity or Bulk Conductivity of Concrete
ASTM D4780-12(2017)e1 Standard Test Method for Determination of Low Surface Area of Catalysts and Catalyst Carriers by Multipoint Krypton Adsorption
ASTM D8393-21 Standard Guide for Determination of Pore Volume of Powdered Catalysts and Catalyst Carriers by Water Adsorption
ASTM D4222-20 Standard Test Method for Determination of Nitrogen Adsorption and Desorption Isotherms of Catalysts and Catalyst Carriers by Static Volumetric Measurements
ASTM E2029-11(2019) Standard Test Method for Volumetric and Mass Flow Rate Measurement in a Duct Using Tracer Gas Dilution
ASTM C1876-19 Standard Test Method for Bulk Electrical Resistivity or Bulk Conductivity of Concrete
ASTM E2029-25 Standard Test Method for Volumetric and Mass Flow Rate Measurement in a Duct Using Tracer Gas Dilution
ASTM C914-95(1999) Standard Test Method for Bulk Density and Volume of Solid Refractories by Wax Immersion
ASTM D4780-12 Standard Test Method for Determination of Low Surface Area of Catalysts and Catalyst Carriers by Multipoint Krypton Adsorption
ASTM D4512-03(2013) Standard Test Method for Vibrated Apparent Packing Density of Fine Catalyst and Catalyst Carrier Particles and Powder
ASTM D4512-03(2013)e1 Standard Test Method for Vibrated Apparent Packing Density of Fine Catalyst and Catalyst Carrier Particles and Powder
ASTM D4222-03(2015)e1 Standard Test Method for Determination of Nitrogen Adsorption and Desorption Isotherms of Catalysts and Catalyst Carriers by Static Volumetric Measurements
ASTM RR-D32-1031 1992 D3663-Standard Test Method for Surface Area of Catalysts
ASTM C1643-14 Standard Test Method to Measuring the Post Dispensing Volumetric Expansion of Aerosol Foam Sealants
ASTM C1643-08 Standard Test Method to Measuring the Post Dispensing Volumetric Expansion of Aerosol Foam Sealants
ASTM D8-16a Standard Terminology Relating to Materials for Roads and Pavements
ASTM RR-D32-1007 1983 D4222-Standard Test Method for Determination of Nitrogen Adsorption and Desorption Isotherms of Catalysts and Catalyst Carriers by Static Volumetric Measurements
ASTM RR-D32-1006 1983 D3663-Standard Test Method for Surface Area of Catalysts
ASTM D4512-22 Standard Test Method for Vibrated Apparent Packing Density of Fine Catalyst and Catalyst Carrier Particles and Powder
ASTM D8-21 Standard Terminology Relating to Materials for Roads and Pavements
ASTM D8-16 Standard Terminology Relating to Materials for Roads and Pavements
ASTM D4512-03(2018)e1 Standard Test Method for Vibrated Apparent Packing Density of Fine Catalyst and Catalyst Carrier Particles and Powder
ASTM D899-00(2018) Standard Practice for Applied Weight Per Unit Area of Liquid Adhesive
ASTM C1122-90(2004)e1 Standard Test Method for Wet Volume of Asbestos
ASTM C1122-90(2004) Standard Test Method for Wet Volume of Asbestos
ASTM RR-C17-1001 1990 C1122-Test Method for Wet Volume of Asbestos
ASTM D3663-99 Standard Test Method for Surface Area of Catalysts and Catalyst Carriers
ASTM D4567-03(2013) Standard Test Method for Single-Point Determination of Specific Surface Area of Catalysts and Catalyst Carriers Using Nitrogen Adsorption by Continuous Flow Method
ASTM RR-D32-1037 1994 D4567-Standard Test Method for Single-Point Determination of Specific Surface Area of Catalysts and Catalyst Carriers Using Nitrogen Adsorption by Continuous Flow Method
ASTM D4567-99 Standard Test Method for Single-Point Determination of Specific Surface Area of Catalysts and Catalyst Carriers Using Nitrogen Adsorption by Continuous Flow Method
ASTM RR-D32-1019 1986 D4567-Test Method for Single-Point Determination of Specific Surface Area of Catalysts and Catalyst Carriers Using Nitrogen Adsorption by Continuous Flow Method
ASTM D4567-03 Standard Test Method for Single-Point Determination of Specific Surface Area of Catalysts and Catalyst Carriers Using Nitrogen Adsorption by Continuous Flow Method
ASTM D4567-03(2008) Standard Test Method for Single-Point Determination of Specific Surface Area of Catalysts and Catalyst Carriers Using Nitrogen Adsorption by Continuous Flow Method

GM Europe

GME 8742-2007 Testing the Specific Volume Resistance of Elastomers, Plastics and Adhesives (English/German; This specification may be applied only for current projects incl. Global Epsilon e (37##). It is Superceded for all future projects and replaced by GMW14711.)

Spanish Association for Standardization (UNE)

UNE 55-910-1985 Surface reagents. Soap. Determination of chlorine. Volume determination
UNE 56919:1990 GRANULATED CORK. BULK DENSITY TEST.
UNE-EN IEC 60580:2020 Medical electrical equipment - Dose area product meters (Endorsed by Asociación Española de Normalización in May of 2020.)
UNE-EN 60580:2001 Medical electrical equipment - Dose area product meters.
UNE 55-808-1985 Volumetric determination of mineral sulfate content in detergents
UNE 55-544-1989 Volumetric determination of disodium salt content in soaps and detergents
AENOR UNE 55564:1979 Surface agents. Crude sodium borates used as raw material for formula detergents. Determination of total aluminum. Volumetry method.

IN-BIS

IS 1153-1975 Specifications for Temporary Preservatives, Fluids, Durocoats, and Solvent Depositions
IS 1154-1957 Specifications for temporary preservatives, fluids, soft films, solvent deposition, and water displacement
IS 1674-1960 Specification for Temporary Protection against Corrosion, Fluids, Soft Films, and Solvent Depositions

Military Standards (MIL-STD)

MIL MIL-PRF-32020-1998 TESTER, LIQUID VOLUMETRIC POSITIVE DISPLACEMENT METER,

South African Bureau of Standard

SANS 5967:2008 Retention of preservative in timber (volume method)
SANS 5560:2005 Pigment volume concentration of paints with a non-aqueous solvent base
SANS 5967:1997 Retention of preservative in timber (volume method)

German Institute for Standardization

DIN 51925:1996 Testing of carbon materials - Preparation of samples of carbonaceous tamping materials and determination of their bulk density - Solid binders and impregnants
DIN 51925:1996-11 Testing of carbon materials - Preparation of samples of carbonaceous tamping materials and determination of their bulk density - Solid binders and impregnants
DIN EN 23-1-1978-11 Size and volume of powdered detergents and cleaners for packaging
DIN EN IEC 60580:2021-07 Medical electrical equipment - Dose area product meters (IEC 60580:2019); German version EN IEC 60580:2020
DIN 277:2021-08 Areas and volumes in building construction
DIN EN ISO 4320:1997 Non-ionic surface active agents - Determination of cloud point-index - Volumetric method (ISO 4320:1977, including Erratum:1980); German version EN ISO 4320:1997
DIN 54408:2007-10 Testing of ion exchangers - Determination of bulk weight density, equilibrium moisture content and solids
DIN EN 60580:2001 Medical electrical equipment - Dose area product meters (IEC 60580:2000); German version EN 60580:2000

Universal Oil Products Company (UOP)

UOP 762-1976 Determination of Apparent Bulk Density for Solid Phosphoric Acid Catalyst

Association Francaise de Normalisation

NF EN 13041:2012 Soil amendments and growing media - Determination of physical properties - Dry bulk density, air volume, water volume, shrinkage value and total porosity
NF ISO 9101:1988 Surfactants - Determination of interfacial tension - Drop volume method
NF T73-410*NF EN ISO 4320:1997 Non-ionic surface active agents. Determination of cloud point index. Volumetric method.
NF C74-103*NF EN IEC 60580:2020 Medical electrical equipment - Dose area product meters
NF EN 17817:2023 Fertilizers, basic mineral amendments and inhibitors - Determination of quantity (declared in mass or volume)

Ente Nazionale Italiano di Unificazione

UNI EN 543:1996 Adhesives. Determination of apparent density of powder and granule adhesives.
UNI EN 543:2006 Adhesives - Determination of apparent density of powder and granule adhesives
UNI EN ISO 787-11:1998 General methods of test for pigments and extenders - Determination of tamped volume and apparent density after tamping

Standard Association of Australia （SAA）

AS 1580.301.2:1990(R2013) Test Methods for Paints and Related Materials Nonvolatile Volume Content (Volume Solids)
AS 2292.1:1979(R2016) Methods for the analysis of solders - Determination of tin (volumetric method)
AS 2292.1:1979 Methods for the analysis of solders - Determination of tin (volumetric method)

U.S. Military Regulations and Norms

ARMY QPL-53084-2013 Primer, Cathodic Electrodeposition, Chemical Agent Resistant
ARMY QPL-53084-QPD-2012 Primer, Cathodic Electrodeposition, Chemical Agent Resistant
ARMY QPL-53084-2011 Primer, Cathodic Electrodeposition, Chemical Agent Resistant
ARMY MIL-DTL-53084 B-2011 PRIMER, CATHODIC ELECTRODEPOSITION, CHEMICAL AGENT RESISTANT
ARMY MIL-T-51289 B NOTICE 1-1995 TEST SET, FLAME THROWER - RIOT CONTROL AGENT DISPERSER, HYDROSTATIC - VOLUMETRIC, 6000 PSI, M5

CZ-CSN

CSN 72 2453-1968 Testing of volume stability of mortar
CSN 72 2346-1983 Test method for dlmensional stability
CSN 70 0626 Cast.4-1976 Glass testing. Chemical analysis of glass. Determination of iron(III)-oxide. Volumetric method with complexone 3

Korean Agency for Technology and Standards (KATS)

KS M ISO 9101:2007 Surface active agents-Determination of interfacial tension-Drop volume method
KS M ISO 9101:2013 Surface active agents－Determination of interfacial tension－Drop volume method
KS M ISO 787-11:2007 General methods of test for pigments and extenders － Part 11: Determination of tamped volume and apparent density after tamping
KS M ISO 9101-2007(2008) Surface active agents－Determination of interfacial tension－Drop volume method
KS C IEC 60580-2023 Medical electrical equipment — Dose area product meters
KS B 5329-2009 VOLUME METERS FOR LIQUIDS

GM Daewoo

GMKOREA EDS-T-7798-2011 Method for determination of volumetric shrinkage of nonstructural adhesives

The Directorate General of Specifications and Metrology (DGSM)

OS GSO ISO 9101:2013 Surface active agents - Determination of interfacial tension - Drop volume method
OS GSO ISO 10563:2008 Building construction - Sealants - Determination of change in mass and volume
OS GSO IEC 60580:2014 Medical electrical equipment - Dose area product meters

Gosstandart of Russia

GOST R 50097-1992 Surface active agents. Determination of interfacial tension. Drop volume method
GOST R 70907-2023 Additive technologies. Metal powder compositions. Determination of bulk density with Scott volumeter

Magyar Szabványügyi Testület

MNOSZ 10151-1952 Volume meter glass device volume bottle

Danish Standards Foundation

DS/INSTA 178:1990 Building sealants. Volume shrinkage and weight loss after ageing
DANSK DS/EN IEC 60580:2020 Medical electrical equipment – Dose area product meters
DANSK DS/EN 772-9:1998 Methods of test for masonry units - Part 9: Determination of volume and percentage of voids and net volume of calcium silicate masonry units by sand filling
DANSK DS/EN 60580:2001 Medical electrical equipment – Dose area product meters
DS/EN ISO 10563:2007 Building construction - Sealants - Determination of change in mass and volume
DANSK DS/EN ISO 10563:2006 Building construction – Sealants – Determination of change in mass and volume
DANSK DS/EN 17725:2024 Plant biostimulants – Determination of the quantity (indicated by mass or volume)
DS/EN 60580:2001 Medical electrical equipment - Dose area product meters
DANSK DS 13000:2007 Opmåling af bygninger, areal- og volumenbegreber

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO ISO 9101:2016 Surface active agents - Determination of interfacial tension - Drop volume method
BH GSO IEC 60580:2016 Medical electrical equipment - Dose area product meters

International Organization for Standardization (ISO)

ISO 9101:1987 Surface active agents; Determination of interfacial tension; Drop volume method
ISO 2031:1972 Granulated cork — Bulk density test

Comitato Elettrotecnico Italiano

CEI EN IEC 60580:2020 Medical electrical equipment - Dose area product meters
CEI EN 60580:2001 Medical electrical equipment - Dose area product meters

British Standards Institution (BSI)

BS EN 14187-4:2017 Cold applied joint sealants. Test methods. Determination of the change in mass and volume after immersion in test fuels and liquid chemicals
BS EN IEC 60580:2020 Medical electrical equipment. Dose area product meters
BS EN ISO 10563:1998 Building construction. Sealants for joints. Determination of change in mass and volume
BS EN ISO 787-11:1982 General methods of test for pigments and extenders - Determination of tamped volume and apparent density after tamping

BE-NBN

NBN 814-08-1970 For additive testing of concrete and mortar, cement slurry. Stability per unit volume

Indonesia Standards

SNI 06-0427-1989 Plastic materials, Determination of bulk density

GCC Standardization Organization

GSO ISO 10563:2008 Building construction - Sealants - Determination of change in mass and volume

Australian/New Zealand Standard (AU-AS/NZS)

AS/NZS 4957:2002 Medical electrical equipment - Dose area product meters

Bureau of Indian Standards

IS/IEC 60580-2019 Medical electrical equipment Dose area product meters
IS 1153-2021 Temporary Corrosion Preventives Hard Film Solvent Deposited

PL-PKN

PN C04829-1992 Agents for laundering and washing. Washing powders. Determination of apparent density. Method by measuring the mass of a given volume

Austrian Standards

ONORM S 7021-1983 Testing of leather; determination of bulk density Leather testing; determination of apparent density

International Electrotechnical Commission (IEC)

IEC 60580:2019 RLV Medical electrical equipment - Dose area product meters

Swedish Institute for Standards

SS-EN IEC 60580:2020 Medical electrical equipment - Dose area product meters
SS-EN 60580:2000 Medical electrical equipment - Dose area product meters
SS-EN 17725:2024 Plant biostimulants — Determination of the quantity (indicated by mass or volume)

Lithuanian Standards Office

LST EN 12919-2001 Workplace atmospheres - Pumps for the sampling of chemical agents with a volume flow rate of over 5 l/min - Requirements and test methods

Standards Norway

NS 3940:1979 Areas and volumes of buildings
NS 3940:1986 Areas and volumes of buildings
NS-EN 12919:1999 Workplace atmospheres — Pumps for the sampling of chemical agents with a volume flow rate of over 5 l/min — Requirements and test methods
NS-EN 772-9:1998 Methods of test for masonry units — Part 9: Determination of volume and percentage of voids and net volume of clay and calcium silicate masonry units by sand filling
NS 3940:2007 Areas and volumes of buildings
NS 3940-2007 Areas and volumes of buildings

European Committee for Electrotechnical Standardization（CENELEC）

EN IEC 60580:2020 Medical electrical equipment - Dose area product meters

GM North America

GM GM9529P-1993 Vertical Rise Method of Determining Volume Change of Sealers Replaced by GM9764P

European Committee for Standardization (CEN)

EN 13041:2011 Soil improvers and growing media - Determination of physical properties - Dry bulk density, air volume, water volume, shrinkage value and total pore space

RO-ASRO

STAS 227/3-1986 Cements PHYSICAL TESTS Vohume constant, deterednation

American National Standards Institute （ANSI)

ANSI/HI 7.6-2018 Controlled-Volume Metering Pumps for Test

U.S. Air Force

AIR FORCE MIL-PRF-32020-1998 TESTER, LIQUID VOLUMETRIC POSITIVE DISPLACEMENT METER