The best coupling state of inductive coupling

The best coupling state of inductive coupling, Total:58 items.

The international standard classification for "The best coupling state of inductive coupling" includes: Electrical and electronic equipment , Chemical laboratories. Laboratory equipment , Man-made fibres .

The Chinese standard classification for "The best coupling state of inductive coupling" includes: Electronic/electrical equipment and instruments for vehicle in general , Electrochemical, thermochemistry and optical profile type analyzer , Chemical fibre in general .

---

未注明发布机构

• ANSI C93.1-1999(R2004) Requirements for Power-Line Carrier Coupling Capacitors and Coupling Capacitor Voltage Transformers (CCVT)

Professional Standard - Agriculture

• 1807药典 一部-2010 Appendix XI D Inductively Coupled Plasma Mass Spectrometry
• 53药典 四部-2020 0412 Inductively coupled plasma mass spectrometry
• 73药典 四部-2015 0412 Inductively coupled plasma mass spectrometry

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

• GB/T 23199-2008 Determination of rare earth elments in tea - Inductive coupled plasma atomic emission spectrometer and inductive coupled plasma mass spectrometer
• GB/T 21437.3-2012 Road vehicles—Electrical disturbances from conduction and coupling—Part 3:Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines
• GB/T 36244-2018 Inductively coupled plasma atomic emission spectrometer
• GB/T 43574-2023 Man-made fibers—Determination of heavy metal content—Inductively coupled plasma optical emission spectrometry(ICP-OES) and inductively coupled plasma mass spectrometry(ICP-MS)

Taiwan Provincial Standard of the People's Republic of China

• CNS 13388-1994 Methods for Inductively Coupled Plasma Emission Spectrochemical Analysis of Steel

CN-QIYE

• Q/GDW 459-2010 Guidelines for Condition Maintenance of Capacitive Voltage Transformers and Coupling Capacitors

American National Standards Institute （ANSI)

• ANSI C93.1-1999 Power Line Carrier Coupling Capacitors and Coupling Capacitor Voltage Transformers (CCVT) - Requirements

Society of Automotive Engineers (SAE)

• SAE J1773-1999 (R) SAE Electric Vehicle Inductive Coupled Charging
• SAE J1113/12-2006 Electrical Interference by Conduction and Coupling Capacitive and Inductive Coupling via Lines Other than Supply Lines
• SAE J1113/12-2017 Electrical Interference by Conduction and Coupling - Capacitive and Inductive Coupling via Lines Other than Supply Lines
• SAE J1113/12-2022 Electrical Interference by Conduction and Coupling - Capacitive and Inductive Coupling via Lines Other than Supply Lines
• SAE J1773-2014 SAE Electric Vehicle Inductively Coupled Charging

Institute of Electrical and Electronics Engineers (IEEE)

• IEEE Std C93.1-1999 Requirements for Power-Line Carrier Coupling Capacitors and Coupling Capacitor Voltage Transformers (CCVT)
• IEEE PC57.13.9/D17, August 2022 IEEE Draft Standard for Power-Line Carrier Coupling Capacitors and Coupling Capacitor Voltage Transformers
• IEEE PC57.13.9 IEEE Draft Standard for Power-Line Carrier Coupling Capacitors and Coupling Capacitor Voltage Transformers
• IEEE/ANSI C93.1-1999 American National Standard Requirements for Power-Line Carrier Coupling Capacitors and Coupling Capacitor Voltage Transformers (CCVT

SAE - SAE International

• SAE J1773-1995 Electric Vehicle Inductive Charge Coupling Recommended Practice@ Recommended Practice
• SAE J1113-12-2017 Electromagnetic Susceptibility Test Procedures for Vehicle Components (Except Aircraft)
• SAE J1113-12-2000 Electrical Interference by Conduction and CouplingCapacitive and Inductive Coupling via Lines Other than Supply Lines
• SAE J1113-12-2006 Electrical Interference by Conduction and CouplingCapacitive and Inductive Coupling via Lines Other than Supply Lines

IEEE - The Institute of Electrical and Electronics Engineers@ Inc.

• IEEE C93.1-1999 Requirements for Power-Line Carrier Coupling Capacitors and Coupling Capacitor Voltage Transformers (CCVT)

German Institute for Standardization

• DIN 20581:1988 Mine cars; strap type coupling
• DIN IEC 60483:1988 Guide to dynamic measurements of piezoelectric ceramics with high electromechanical coupling; identical with IEC 60483, edition 1976
• DIN EN 15605:2010-12 Copper and copper alloys - Inductively coupled plasma optical emission spectrometry; German version EN 15605:2010

British Standards Institution (BSI)

• BS ISO 7637-3:2007 Road vehicles - Electrical disturbances from conduction and coupling - Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines
• BS ISO 7637-3:2016 Road vehicles. Electrical disturbances from conduction and coupling. Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines
• BS EN 15605:2010 Copper and copper alloys.Inductively coupled plasma optical emission spectrometry

International Electrotechnical Commission (IEC)

• ISO/TS 13278:2011 Nanotechnologies - Determination of elemental impurities in samples of carbon nanotubes using inductively coupled plasma mass spectrometry
• IEC 60483:1976 Guide to dynamic measurements of piezoelectric ceramics with high electromechanical coupling

CEPT - Conference Europeenne des Administrations des Postes et des Telecommunications

• ERC REPORT 101-1999 A Comparison of the Minimum Coupling Loss Method@ Enhanced Minimum Coupling Loss Method@ and the Monte-Carlo Simulation (Menton)

International Organization for Standardization (ISO)

• ISO/TS 13278:2017 Nanotechnologies - Determination of elemental impurities in samples of carbon nanotubes using inductively coupled plasma mass spectrometry
• ISO 7637-3:2007 Road vehicles - Electrical disturbances from conduction and coupling - Part 3: Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines
• ISO 7637-3:2016 Road vehicles - Electrical disturbances from conduction and coupling - Part 3: Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines

SCC

• ANSI/NEMA C93.1-1999 American National Standard for Requirements for Power-Line Carrier Coupling Capacitors and Coupling Capacitor Voltage Transformers (CCVT)
• DANSK DS/EN 15605:2010 Copper and copper alloys - Inductively coupled plasma optical emission spectrometry
• UNE-CEN/TS 15605:2008 IN Copper and copper alloys - Inductively coupled plasma optical emission spectrometry
• NS-EN 15605:2010 Copper and copper alloys — Inductively coupled plasma optical emission spectrometry

National Electrical Manufacturers Association（NEMA)

• NEMA C93.1-1999 Requirements for Power-Line Carrier Coupling Capacitors and Coupling Capacitor Voltage Transformers (CCVT) Supersedes ANSI C93.1:1990

ZA-SANS

• VC 8012-1998 Appliance couplers

Defense Logistics Agency

• DLA AN3068 REV 3 NOTICE 1-1998 COUPLING - ELECTRICAL CONDUIT
• DLA AN3068 REV 3 VALID NOTICE 2-2003 COUPLING - ELECTRICAL CONDUIT
• DLA AN3068 REV 3-1953 COUPLING - ELECTRICAL CONDUIT
• DLA AN3068 REV 3 VALID NOTICE 3-2008 COUPLING - ELECTRICAL CONDUIT

Conference of European Post Telecommunication (CEPT)

• CEPT ERC REPORT 101-1999 A Comparison of the Minimum Coupling Loss Method, Enhanced Minimum Coupling Loss Method, and the Monte-Carlo Simulation (Menton)

NEMA - National Electrical Manufacturers Association

• NEMA C93.1-1990 Power-Line Carrier Coupling Capacitors and Coupling Capacitor Voltage Transformers (CCVT) - Requirements (Now copyrighted by IEEE)
• NEMA SG 11-1955 COUPLING CAPACITORS@ COUPLING CAPACITOR POTENTIAL DEVICES@ and LINE TRAPS

Korean Agency for Technology and Standards (KATS)

• KS C IEC 60483:2016 Guide to dynamic measurements of piezoelectric ceramics with high electromechanical coupling
• KS C IEC 60483-2021 Guide to dynamic measurements of piezoelectric ceramics with high electromechanical coupling
• KS C IEC 60483-2016(2021) Guide to dynamic measurements of piezoelectric ceramics with high electromechanical coupling

GSO

• GSO IEC 60483:2017 Guide to dynamic measurements of piezoelectric ceramics with high electromechanical coupling
• OS GSO IEC 60483:2017 Guide to dynamic measurements of piezoelectric ceramics with high electromechanical coupling

AENOR

• UNE-EN 15605:2011 Copper and copper alloys - Inductively coupled plasma optical emission spectrometry

Danish Standards Foundation

• DS/EN 15605:2010 Copper and copper alloys - Inductively coupled plasma optical emission spectrometry

Lithuanian Standards Office

• LST EN 15605-2010 Copper and copper alloys - Inductively coupled plasma optical emission spectrometry

Others: The best coupling state of inductive coupling