solution instability
solution instability, Total:99 items.
The international standard classification for "solution instability" includes: Other equipment for petroleum and natural gas industries , Pesticides and other agrochemicals , Pigments and extenders , Protection against dangerous goods .
The Chinese standard classification for "solution instability" includes: Petroleum exploration, development, gathering and transportation engineering in general , Basic standards and general methods for dye , Marking, packaging, transport and storage in general .
Professional Standard - Petroleum
- SY/T 6533-2002 Testing and interpretation method for systematic well testing
- SY/T 6363-1998 Technical requirement for transient well testing
未注明发布机构
- DIN 4084 E:2021-05 Soil - Calculation of embankment failure and overall stability of retaining structures
- ASTM RR-D02-1676 2009 D2619-Test Method for Hydrolytic Stability of Hydraulic Fluids (Beverage Bottle Method)
- ASTM RR-D02-1162 1982 D2619- Test for Hydrolytic Stability of Hydraulic Fluids (Beverage Bottle Method)
- DIN 4084 E:2002-11 Soil - Calculation of embankment failure and overall stability of retaining structures
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China
- GB/T 17520-1998 Determination of solubility and solution stability of reactive dyes in the presence of electrolytes
- GB/T 32777-2016 Test method of degree of dissolution and solution stability for pesticides
- GB/T 3671.1-1996 Determination of application solubility and solution stability of water-soluble dyes
- GB/T 7193.5-1987 Unsaturated polyester resin--Determination of heat stability at 80 Centigrade
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会
- GB/T 34711-2017 Testing method for classification of chemically unstable gases
Professional Standard - Railway
- TB 1600-1985 Hydrolysis of polymaleic anhydride with water quality stabilizer for locomotive boilers
ESDU - Engineering Sciences Data Unit
- ESDU 08012-2009 Aerodynamics and aero-acoustics of rectangular planform cavities. Part IIIB: Alleviation of unsteady flow effects - acoustic suppression using passive devices
- ESDU 82020 A-2001 Introduction to unsteady aerodynamics.
- STRUCT 01.01.24 A-1976 The compressive instability of hydraulic jacks.
- STRUCT 01.01.10 B-1978 Torsional instability of stringers and struts of angle section.
GM North America
- GM GM9231P-1999 Hydrolytic Stability (Revision B)
- GM GMP.PA66.054-2010 NYLON 66 - 33% GLASS FIBER REINFORCED, HEAT STABILIZED, HYDROLYSIS RESISTANT (Issue 3; Do Not Use on New Programs; Replaced by GMW16270)
- GM GMP.PA66.046-2011 Nylon 66 - 25% Glass Fiber Reinforced, Heat Stabilized, Hydrolysis Resistant (Issue 2; Do Not Use on New Programs; Replaced by GMW16270)
- GM GMP.PA66.054-1996 Nylon 66 - 33% Glass Fiber Reinforced, Heat Stabilized, Hydrolysis Resistant
- GM GMP.PA66.046-1997 Nylon 66 - 25% Glass Fiber Reinforced, Heat Stabilized, Hydrolysis Resistant
ES-AENOR
- UNE 55-535-1989 Determination of stable anionic active neutral non-hydrolyzable substances in detergents
IPC - Association Connecting Electronics Industries
- IPC TM-650 2.6.11C-2000 Hydrolytic Stability Solder Mask
- IPC TM-650 2.6.11D-2007 Solder Mask - Hydrolytic Stability
- IPC TM-650 2.6.11B-1988 Hydrolytic Stability Solder Mask and Conformal Coatings
- IPC TM-650 2.6.11B-1998 Hydrolytic Stability Solder Mask and Conformal Coatings
RU-GOST R
- GOST 28447.0-1990 Pneumotextured threads. Methods for the determination of structure and tensile strength instability
- GOST 18986.21-1978 Reference diodes and stabistors. Method for measuring time drift of working voltage
- GOST 21316.5-1975 Photocells. Method of instability measurement
- GOST 26490-1985 Soils. Determination of mobile sulfur by CINAO method
- GOST 11612.11-1985 Photomultipliers. Measuring method of instability
- GOST R 55332-2012 Milk and milk products. Methods for determination of free (destabilization) fat
Building Officials and Code Administrators International(U.S.)
- BOCA CHAPTER 42 NFPC-1993 Unstable (Reactive) Materials
- BOCA CHAPTER 42 NFPC COMM-1993 Unstable (Reactive) Chemicals
- BOCA CHAPTER 42 NFPC-1999 Liquid and Solid Unstable (Reactive) Materials
- BOCA CHAPTER 42 NFPC-1996 Liquid and Solid Unstable (Reactive) Materials
CU-NC
- NC 33-87-1988 Oil Industry. Soluble Oil Determination of Emulsión Stability
- NC 33-88-1988 Oil Industry. Soluble Oil. Determination of Thermal Stability
Institute of Interconnecting and Packaging Electronic Circuits (IPC)
- IPC TM-650 2.6.11.1-2000 Hydrolytic Stability - Conformal Coating
- IPC TM-650 2.6.11-2007 Solder Mask - Hydrolytic Stability Revision D
- IPC TM-650 2.6.17-1982 Hydrolytic Stability, Flexible Printed Wiring Material
SCC
- MIL MIL-PRF-87252E-2018 Coolant Fluid, Hydrolytically Stable, Dielectric
- AWWA MTC64580 Calcite Contactor Post Stabilization
- MIL MIL-PRF-87252D-2015 Coolant Fluid, Hydrolytically Stable, Dielectric
- CAN/CGSB-53.138-M89-1989 Loose leaf, settled and unsettled
- CAN/CGSB-53.138-1996 Loose leaf, settled and unsettled
- CSA Z902-15:2015 Blood and labile blood products
- AWWA JAW23983 Journal AWWA — Ozone-Induced Particle Destabilization
- MIL MIL-PRF-87252C-1997 COOLANT FLUID, HYDROLYTICALLY STABLE, DIELECTRIC (SUPERSEDING MIL-C-87252B)
- AWWA JAW39523 Journal AWWA — Revenue Instability Induced by Conservation Rates
- AWWA WQTC71612 Chloramine Auto Decomposition and Stability of BAC Filtered Water
- VDI 2222 BLATT 1-1997 Design methodology — methodical development of solution principles
U.S. Air Force
- AIR FORCE QPL-87252-2 (2)-2005 COOLANT FLUID, HYDROLYTICALLY STABLE, DIELECTRIC
- AIR FORCE QPL-87252-2013 Coolant Fluid, Hydrolytically Stable, Dielectric
- AIR FORCE QPL-87252-QPD-2010 COOLANT FLUID, HYDROLYTICALLY STABLE, DIELECTRIC
- AIR FORCE QPL-87252-2-2004 COOLANT FLUID, HYDROLYTICALLY STABLE, DIELECTRIC
- AIR FORCE QPL-87252-2011 Coolant Fluid, Hydrolytically Stable, Dielectric
- AIR FORCE MIL-PRF-87252 C (1)-2004 COOLANT FLUID, HYDROLYTICALLY STABLE, DIELECTRIC
SE-SIS
- SIS 18 41 22-1974 Paints. Determination of the mass volatile and non-volatile matter
PL-PKN
- PN C04084-1988 Determination of hydrolytic stability of hydraulic fluids
- PN C85047-1957 dye. Determination of the stability and colorfastness of iron and copper salts in dyeing baths
National Fire Protection Association (NFPA)
- NFPA 1H PART 6 CHAPTER 72-2003 Unstable (Reactive) Solids and Liquids
American National Standards Institute (ANSI)
- ANSI/TIA/EIA 526-17-1993 Output Jitter Measurement
- ANSI/TIA/EIA 526-15-1993 Jitter Tolerance Measurement
- ANSI/TIA/EIA 526-16-1993 Jitter Transfer Function Measurement
- ANSI/TIA/EIA 526-18-1993 Systematic Jitter Generation Measurement
Korean Agency for Technology and Standards (KATS)
- KS B ISO TR 11332-2015 Hydrometric determination-Unstable channels and ephemeral streams
- KS B ISO TR 11332-2003(2013) Hydrometric determination-Unstable channels and ephemeral streams
- KS K 0261-2010 Tes method for labile sulfur in textile materials
- KS K 0261-1985 Test method for labile sulfur in textile materials
- KS K 0261-2018 Test method for labile sulfur in textile materials
- KS B ISO TR 11332:2003 Hydrometric determination-Unstable channels and ephemeral streams
- KS B ISO TR 11332:2015 Hydrometric determination-Unstable channels and ephemeral streams
- KS K ISO 105-Z08:2009 Textiles-Tests for colour fastness-Part Z08:Determination of solubility and solution stability of reactive dyes in the presence of electrolytes
RO-ASRO
- STAS 11576-1983 FLUXES FOR SOLDERING OF METALS Classification
- STAS 12472-1986 PLASTICS POLYETHYLENE Method for stability determination at thermooxidative degradation
International Telecommunication Union (ITU)
- ITU-T Q.32 SPANISH-1988 REDUCTION OF THE RISK OF INSTABILITY BY SWITCHING MEANS
- ITU-T Q.32 FRENCH-1988 REDUCTION OF THE RISK OF INSTABILITY BY SWITCHING MEANS
- ITU-T Q.32-1988 REDUCTION OF THE RISK OF INSTABILITY BY SWITCHING MEANS
- ITU-R TF.538-3-1994 Measures for Random Instabilities in Frequency and Time (Phase)
- ITU-R TF.538-4-2017 Measures for random instabilities in frequency and time (phase)
- ITU-R TF.538-3 FRENCH-1994 Measures for Random Instabilities in Frequency and Time (Phase)
- ITU-R TF.538-3 SPANISH-1994 MEASURES FOR RANDOM INSTABILITIES IN FREQUENCY AND TIME (PHASE)
AT-ON
- ONORM M 9810 Teil.8-1986 Stability of litt trucks; rough terrain fork litt trucks
German Institute for Standardization
- DIN 4084:2009 Soil - Calculation of embankment failure and overall stability of retaining structures
- DIN EN ISO 105-Z08:1997 Textiles - Tests for colour fastness - Part Z08: Determination of solubility and solution stability of reactive dyes in the presence of electrolytes (ISO 105-Z08:1995); German version EN ISO 105-Z08:1997
CZ-CSN
- CSN 72 0107-1973 Determination of acid - indecomposable part
British Standards Institution (BSI)
- BS EN 61234-1:1994 Method of test for hydrolytic stability of electrical insulating materials. Method of test for hydrolytic stability of electrical insulating materials. Plastic films
SAE - SAE International
- SAE AMS4222-1942 Aluminum Alloy Castings (Sand) Copper Nickel Magnesium (Solution and Stabilized)
Association Francaise de Normalisation
- NF G37-122:1981 Fabrics coated with rubber or plastic. Hydrolytic stability.
TN-INNORPI
- NT 19.13-1983 Leather. Determination of water and other unstable materials.
- NT 19.14-1983 Leather. Determination of water and other unstable materials.
American Society for Testing and Materials (ASTM)
- ASTM D3137-81(2007) Standard Test Method for Rubber Property8212;Hydrolytic Stability
- ASTM D3137-81(2013) Standard Test Method for Rubber Propertymdash;Hydrolytic Stability
- ASTM D3137-81(1994) Standard Test Method for Rubber Property8212;Hydrolytic Stability
- ASTM D3137-81(2001) Standard Test Method for Rubber Property8212;Hydrolytic Stability
International Organization for Standardization (ISO)
- ISO/TR 11332:1998 Hydrometric determinations - Unstable channels and ephemeral streams
- ISO 105-Z08:1995 Textiles - Tests for colour fastness - Part Z08: Determination of solubility and solution stability of reactive dyes in the presence of electrolytes
Society of Automotive Engineers (SAE)
- SAE AMS4973G-2012 Titanium Alloy Forgings 8Al 1Mo 1V Solution Heat Treated and Stabilized
Pyrolysis,glycerolysis,silicon solution,flame solution,Enzymolysis,solve,lipolysis,Instrument solution,micro solution,Ethanolysis,microwave solution,problem solving,untie,Solution+,Well solution,Unbalance,Phenolysis,electropyrolysis,Numerical Solution,solution instability