Ray polymer

Ray polymer, Total:240 items.

The international standard classification for "Ray polymer" includes: Concrete and concrete products , Photographic paper, films and cartridges , Rubber , Dental materials , Raw materials for rubber and plastics , Animal and vegetable fats and oils , Implants for surgery, prosthetics and orthotics .

The Chinese standard classification for "Ray polymer" includes: Cement composite material and additives , Photosensitive material , Basic standard and general method for synthetic rubber , Stomatologic device, equipment and material , Synthetic resin and plastic , Grease and oil processing and products , Orthopedic devices .

Group Standards of the People's Republic of China

T/HEBQIA 025-2021 vegetable polymer fuel oil
T/CHTS 20035-2023 Crystalline Colloid Modified Polymer for Shotcrete
T/CADBM 77-2024 Polymer modified decorative cement
T/PLQ 0003-2018 polymer modified bitumen
T/SDHCIA 012-2021 Online solid polymer electrochemical total volatile organic compounds（TVOC）monitor
T/CECS 10192-2022 Polymer micro-cement
T/CSTM 00984-2023 Test methods of liquid crystal polymer / modified polyimide materials for antennas

Professional Standard - Chemical Industry

HG/T 5517～5518-2019 Polymer coated urea and polymer sulfur coated urea (2019)
HG/T 4126-2009 Polyester film base for X-ray film

Professional Standard - Commodity Inspection

SN/T 3795-2014 Screening of cobalt dichloride in the silicone and other polymer - Wavelength dispersive X-ray fluorescence spectrometric method

Professional Standard - Petrochemical Industry

SH/T 1764.1-2008 Rubber-Analysis by pyrolytic gas-chromatographic methods-Part 1:Identification of polymers(single polymers and polymer blends)

Professional Standard - Construction Industry

JGJ 337-2015 Technical Specification for Strengthening of Building Structures with Steel Stranded Wire Mesh and Polymer Mortar

Professional Standard - Medicine

YY 0270.1-2011 Dentistry-Base polymers-Part 1:Denture base polymers
YY/T 0270.2-2011 Dentistry—Base polymers—Part 2:Orthodontic base polymers
YY 0270.1-2011/ISO 20795-1:2008 Dentistry--Base polymers--Paet 1:Denture base polymers

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 31062-2014 Polymeric polyols
GB/T 22480-2008 Animal and vegetable fats and oils—Determination of polyethylene-type polymers

工业和信息化部

YS/T 1178-2017 Phase analysis for aluminum slag-X-ray diffraction spectroscopy
SH/T 1827-2019 Plastics - Determination of crystallinity - X-ray diffractometry
HG/T 5517-2019 Polymer coated urea

国家食品药品监督管理局

YY/T 0661-2017 Standard specification for semi-Crystalline poly ( lactide) polymer and copolymer resin for surgical implants

未注明发布机构

DIN EN ISO 20795-1 E:2012-10 Dental raw material polymers Part 1: Denture raw material polymers (draft)
DIN EN ISO 20795-2 E:2012-10 Dental Raw Polymers Part 2: Dental Raw Polymers (Draft)

Taiwan Provincial Standard of the People's Republic of China

CNS 14184-1998 Polymer-modified paving asphalt

Korean Agency for Technology and Standards (KATS)

KS C 3904-2003(2018) Polymer bushing for wiring lines
KS C 3904-2023 Polymer bushing for distribution lines
KS C 3904-2003 Polymer bushing for distribution lines
KS M 3826-1993 Determination of Chlorine in Chlorine-containing Polymers,Copolymers and their Compounds
KS C 4808-2011(2021) Polymer-housed metal-oxide surge arresters without gaps for distribution line
KS M ISO 7270-1-2007(2017) Rubber－Analysis by pyrolytic gas-chromatographic methods－Part 1：Identification of polymers(single polymers and polymer blends)
KS P ISO 20795-2:2011 Dentistry－Base polymers－Part 2：Orthodontic base polymers
KS F 4911-2017 Waterproofing sheets of synthetic polymer
KS M ISO 7270-1-2007(2022) Rubber－Analysis by pyrolytic gas-chromatographic methods－Part 1：Identification of polymers(single polymers and polymer blends)
KS P ISO 20795-1:2020 Dentistry — Base polymers — Part 1: Denture base polymers
KS F 4911-2023 Waterproofing sheets of synthetic polymer
KS F 4911-1984 Waterproofing sheets of synthetic polymer
KS P ISO 20795-2-2011(2016) Dentistry－Base polymers－Part 2：Orthodontic base polymers
KS M ISO 7270-1:2007 Rubber－Analysis by pyrolytic gas-chromatographic methods－Part 1：Identification of polymers(single polymers and polymer blends)
KS P ISO 20795-1:2010 Dentistry-Base polymers-Part 1:Denture base polymers
KS P ISO 20795-2:2021 Dentistry — Base polymers — Part 2: Orthodontic base polymers
KS P ISO 20795-1:2014 Dentistry－Base polymers－Part 1：Denture base polymers
KS P 5304-2003 Dentistry－Synthetic polymer teeth
KS P 5304-1986 Dentistry－Synthetic polymer teeth
KS H ISO 6656:2008 Animal and vegetable fats and oils-Determination of polyethylene-type polymers
KS C 4808-2021 Polymer-housed metal-oxide surge arresters without gaps for distribution line
KS H ISO 6656-2023 Animal and vegetable fats and oils－Determination of polyethylene-type polymers

ES-UNE

UNE 53934:2016 Plastics. Elemental analysis in polymeric materials by X-ray fluorescence method

SCC

BS 1882:1976 Specification for flexible polymeric tubing and drainage sheeting (radio-opaque) for medical use
AENOR UNE 53934:2016 Plastics. Elemental analysis in polymeric materials by the X-ray fluorescence method.
BS ISO 7270-1:2003 Rubber. Analysis by pyrolytic gas-chromatographic methods. Identification of polymers (single polymers and polymer blends)
ISO 2028:2015 Plus Redline Synthetic rubber latex - Preparation of dry polymer (includes Redline Version)
DANSK DS/EN ISO 20795-2:2013 Dentistry - Base polymers - Part 2: Orthodontic base polymers
DANSK DS/EN ISO 20795-1:2013 Dentistry - Base polymers - Part 1: Denture base polymers
BS PD IEC TR 61244-4:2019 Determination of long-term radiation ageing in polymers-Effects of different temperatures and dose rates under radiation condition
MIL MIL-W-22759E-1990 WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, COPPER OR COPPER ALLOY (SUPERSEDING MIL-W-22759D) (S/S BY SAE-AS22759)
DANSK DS/ISO 13781:2017 Implants for surgery – Homopolymers, copolymers and blends on poly(lactide) – In vitro degradation testing
ADA 12-1999(R2008) Denture Base Polymers
MIL MIL-W-81044B-1973 WIRE, ELECTRIC, CROSSLINKED POLYALKENE, CROSSLINKED ALKANE-IMIDE POLYMER, OR POLYARYLENE INSULATED, COPPER OR COPPER ALLOY (SUPERSEDING MIL-W-81044A)(S/S BY SAE-AS81044)
HOLDEN HN 1447-2001 Methylpentene Polymer
HOLDEN HN 1415-2012 Polyamide 12 Compounds
ADA 139-2012 Dental Base Polymers
HOLDEN HN 1415-2001 Polyamide 12 Compounds
HOLDEN HN 2147-2002 Polymer Coating Powder

RU-GOST R

GOST 25645.323-1988 Polyimeric materials. Methods of radiation tests
GOST R 56209-2014 Rods composite polymer for the manufacture of cores uninsulated wires. Specifications
GOST 28843-1990 Polyurethane thread spandex. Test methods
GOST 19465-1974 Protective polymeric coverings for the improvement of radioactivity situation. Terms and definitions
GOST R 58021-2017 Composite polymeric supports for overhead power lines of voltage 6 - 20 kV. General specifications
GOST 12302-2013 Packs made of polymeric films and composite materials. General specifications
GOST 33684-2015 Polymer composite roofs for covered freight cars of 1520 mm gaugemain line railways. Specifications
GOST 33742-2016 Polymer composites. Classification
GOST 28614-1990 Rubber. Identification of polymers (single polymers and blends) by pyrolytic gas chromatographic method
GOST R 50579-1993 Polymer composites. Classification
GOST R 57578-2017 Polymer composites. Method for determination of linear thermal expansion with a interferometry
GOST R 57708-2017 Polymer composites. Method for determination of linear thermal expansion with a push-rod dilatometer

KR-KS

KS C 3904-2003(2023) Polymer bushing for distribution lines
KS M ISO 7270-1-2023 Rubber — Analysis by pyrolytic gas-chromatographic methods — Part 1: Identification of polymers (single polymers and polymer blends)
KS P ISO 20795-1-2020 Dentistry — Base polymers — Part 1: Denture base polymers
KS P ISO 20795-2-2021 Dentistry — Base polymers — Part 2: Orthodontic base polymers

ZA-SANS

SANS 1228:2003 Abrasion-resistant polymeric gloves: Lined type
SANS 1228:2009 Abrasion-resistant polymeric gloves: Lined type
SANS 1042:2006 Polymer floor dressings

SAE - SAE International

SAE AS22759C-2014 Wire, Electrical, Fluoropolymer-Insulated, Copper or Copper Alloy
SAE AS22759A-A1-2008 Wire@ Electrical@ Fluoropolymer-Insulated@ Copper or Copper Alloy
SAE AS22759-A1-2005 Wire@ Electrical@ Fluoropolymer-Insulated@ Copper or Copper Alloy
SAE AMS3658D-2008 POLYTETRAFLUOROETHYLENE EXTRUSIONS Premium Strength, Stress-Relieved, Radiographically Inspected
SAE AS22759/30B-2019 WIRE@ ELECTRIC@ FLUOROPOLYMER-INSULATED EXTRUDED TFE@ POLYIMIDE COATED@ SILVER-COATED HIGH STRENGTH COPPER ALLOY CONDUCTOR@ 600-VOLT@ ROHS
SAE AS22759/10A-2015 WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, EXTRUDED TFE, NICKEL-COATED COPPER CONDUCTOR, 1000 VOLT
SAE AS22759/14-2000 Wire@ Electrical@ Fluoropolymer-Insulated@ FEP-PVF2@ Light weight@ Tin-Coated Copper@ Conductor@ 600-Volt
SAE AS22759/5A-2015 WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, ABRASION RESISTANT EXTRUDED PTFE, SILVER-COATED COPPER CONDUCTOR, 600 VOLT, ROHS
SAE AS22759/30-2001 WIRE@ ELECTRIC@ FLUOROPOLYMER-INSULATED@ EXTRUDED TFE@ POLYIMIDE COATED@ SILVER-COATED HIGH STRENGTH COPPER ALLOY CONDUCTOR@ 600-VOLT

Society of Automotive Engineers (SAE)

SAE AS22759B-2011 Wire, Electrical, Fluoropolymer-Insulated, Copper or Copper Alloy
SAE AS22759-2001 Wire, electrical, fluoropolymer-insulated, copper or copper alloy
SAE AS22759A-2006 (R) Wire, Electrical, Fluoropolymer-Insulated, Copper or Copper Alloy
SAE ARP7204-2023 Polymeric Bearings for Linear Actuators
SAE AS22759D-2018 Wire, Electrical, Fluoropolymer-Insulated, Copper or Copper Alloy
SAE AS22759_A1-2005 Wire, Electrical, Fluoropolymer-Insulated, Copper or Copper Alloy
SAE AS22759A_A1-2008 Wire, Electrical, Fluoropolymer-Insulated, Copper or Copper Alloy
SAE AS81044A-2011 Wire, Electrical, Crosslinked Polyalkene, Crosslinked Alkane-imide Polymer, or Polyarlyene Insulated, Copper or Copper Alloy
SAE AMS3656B-1976 POLYTETRAFLUOROETHYLENE EXTRUSIONS Normal Strength, As Sintered, Radiographically Inspected
SAE AMS3657-1966 POLYTETRAFLUOROETHYLENE EXTRUSIONS Premium Strength, As Sintered, Radiographically Inspected
SAE AMS3656A-1966 POLYTETRAFLUOROETHYLENE EXTRUSIONS Normal Strength, As Sintered, Radiographically Inspected
SAE AMS3656D-2011 POLYTETRAFLUOROETHYLENE EXTRUSIONS Normal Strength, As Sintered, Radiographically Inspected
SAE AMS3657B-2011 POLYTETRAFLUOROETHYLENE EXTRUSIONS Premium Strength, As Sintered, Radiographically Inspected
SAE AMS3657A-1976 POLYTETRAFLUOROETHYLENE EXTRUSIONS Premium Strength, As Sintered, Radiographically Inspected
SAE AS81044B-2019 Wire, Electrical, Crosslinked Polyalkene, Crosslinked Alkane-Imide Polymer, or Polyarylene Insulated, Copper or Copper Alloy
SAE AS81044_A1-2004 Wire, Electrical, Crosslinked Polyalkene, Crosslinked Alkane-Imide Polymer, Or Polyarlyene Insulated, Copper Or Copper Alloy
SAE AMS3658-1966 POLYTETRAFLUOROETHYLENE EXTRUSIONS Premium Strength, Stress Relieved, Radiographically Inspected
SAE AMS3658A-1976 POLYTETRAFLUOROETHYLENE EXTRUSIONS Premium Strength, Stress-Relieved, Radiographically Inspected
SAE AMS3658B-2011 POLYTETRAFLUOROETHYLENE EXTRUSIONS Premium Strength, Stress-Relieved, Radiographically Inspected
SAE AS81044_A2-2008 Wire, Electrical, Crosslinked Polyalkene, Crosslinked Alkane-Imide Polymer, or Polyarlyene Insulated, Copper or Copper Alloy
SAE AS81044-2004 Wire, Electrical, Crosslinked Polyalkene, Crosslinked Alkane-Imide Polymer, or Polyarlyene Insulated, Copper or Copper Alloy
SAE AS22759/12-2000 WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, EXTRUDED TFE, NICKEL-COATED COPPER CONDUCTOR, 600 VOLT
SAE AS22759/30-2007 WIRE, ELECTRIC, FLUOROPOLYMER-INSULATED, EXTRUDED TFE, POLYIMIDE COATED, SILVER-COATED HIGH STRENGTH COPPER ALLOY CONDUCTOR, 600-VOLT
SAE AS22759/5-2007 WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, ABRASION RESISTANT EXTRUDED PTFE, SILVER-COATEDCOPPER CONDUCTOR, 600 VOLT
SAE AS22759/28-2007 WIRE, ELECTRIC, FLUOROPOLYMER-INSULATED, EXTRUDED TFE, POLYIMIDE COATED, SILVER-COATED COPPER CONDUCTOR, 600-VOLT
SAE AS22759/12-2007 WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, EXTRUDED TFE, NICKEL-COATED COPPER CONDUCTOR, 600 VOLT
SAE AS22759/5-2000 Wire, Electrical, Fluoropolymer-Insulated, Abrasion Resistant Extruded PTFE, Silver-Coated Copper Conductor, 600 Volt
SAE AS22759/9-2007 WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, EXTRUDED TFE, SILVER-COATED COPPER CONDUCTOR, 1000 VOLT
SAE AS22759/11-2007 WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, EXTRUDED TFE, SILVER-COATED COPPER CONDUCTOR, 600 VOLT
SAE AS22759/10-2007 WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, EXTRUDED TFE, NICKEL-COATED COPPER CONDUCTOR, 1000 VOLT
SAE AS22759/32-2007 WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, CROSSLINKED MODIFIED ETFE, LIGHTWEIGHT, TIN-COATED COPPER, 150°C, 600 VOLT
SAE AS22759/6-2000 WIRE, ELECTRICAL, FLUOROCARBON-INSULATED, ABRASION RESISTANT EXTRUDED PTFE, NICKEL-COATED COPPER CONDUCTOR, 600 VOLT
SAE AS22759/44-2007 WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, CROSS-LINKED MODIFIED ETFE, LIGHTWEIGHT, SILVER-COATED COPPER, 200°C, 600 VOLT
SAE AS22759/31-2007 WIRE, ELECTRIC, FLUOROPOLYMER-INSULATED, EXTRUDED TFE, POLYIMIDE COATED, NICKEL-COATED HIGH STRENGTH COPPER ALLOY CONDUCTOR, 600-VOLT
SAE AS22759/28A-2015 WIRE, ELECTRIC, FLUOROPOLYMER-INSULATED, EXTRUDED TFE, POLYIMIDE COATED, SILVER-COATED COPPER CONDUCTOR, 600-VOLT, ROHS
SAE AS22759/5A-2020 WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, ABRASION RESISTANT EXTRUDED PTFE, SILVER-COATED COPPER CONDUCTOR, 600 VOLT, ROHS

American Society for Testing and Materials (ASTM)

ASTM E3295-23 Standard Guide for Using Micro X-Ray Fluorescence (μ-XRF) in Forensic Polymer Examinations
ASTM E3295-22 Standard Guide for Using Micro X-Ray Fluorescence (μ-XRF) in Forensic Polymer Examinations
ASTM UOP905-20 Platinum Agglomeration by X-Ray Diffraction
ASTM UOP905-91 Platinum Agglomeration by X-Ray Diffraction
ASTM UOP905-08 Platinum Agglomeration by X-Ray Diffraction
ASTM D934-80(2003) Standard Practices for Identification of Crystalline Compounds in Water-Formed Deposits By X-Ray Diffraction
ASTM D934-08 Standard Practices for Identification of Crystalline Compounds in Water-Formed Deposits By X-Ray Diffraction
ASTM D934-80(1999) Standard Practices for Identification of Crystalline Compounds in Water-Formed Deposits By X-Ray Diffraction
ASTM D934-13 Standard Practices for Identification of Crystalline Compounds in Water-Formed Deposits By X-Ray Diffraction
ASTM D934-22 Standard Practices for Identification of Crystalline Compounds in Water-Formed Deposits By X-Ray Diffraction
ASTM D5260-04 Standard Classification for Chemical Resistance of Poly(Vinyl Chloride) (PVC) Homopolymer and Copolymer Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds
ASTM D5260-22 Standard Classification for Chemical Resistance of Poly(Vinyl Chloride) (PVC) Homopolymer and Copolymer Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds
ASTM D5260-97 Standard Classification for Chemical Resistance of Poly(Vinyl Chloride) (PVC) Homopolymer and Copolymer Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds
ASTM D5260-16 Standard Classification for Chemical Resistance of Poly(Vinyl Chloride) (PVC) Homopolymer and Copolymer Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds
ASTM E280-98(2004)e1 Standard Reference Radiographs for Heavy-Walled (4 &189; to 12-in. [114 to 305-mm]) Steel Castings
ASTM E280-21 Standard Reference Radiographs for Heavy-Walled (4 1 2 to 12 in. (114 to 305 mm)) Steel Castings
ASTM E2809-22 Standard Guide for Using Scanning Electron Microscopy/Energy Dispersive X-Ray Spectroscopy (SEM/EDS) in Forensic Polymer Examinations
ASTM F794-21 Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Gravity Sewer Pipe and Fittings Based on Controlled Inside Diameter
ASTM D1784-99ae1 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds

SE-SIS

SIS 16 43 53-1965 Polyamide 6/6-6. Injection moulding compound

GM North America

GM GMP.E/P.119-2003 Polyolefin Alloy UV Stabilized, 20% Mineral Filler, Scratch Resistant, Injection Molded
GM GMP.E/P.107-2002 Polyolefin Alloy UV Stabilized, 10% Mineral Filler, 1400 Flexural Modulus, Injection Molded
GM 9985574-1994 Adhesive, Urethane, Polymer
GM 9985573-1994 Adhesive, Urethane, Polymer
GM GMP.PP.013-1994 Polypropylene - Homopolymer, General Purpose, Injection Molding
GM GMP.PP.070-1993 Polypropylene - Copolymer, UV Stabilized, 20% Hollow Glass Sphere Fillers, Injection Molding Grade
GM GMP.PE.008-1998 Polyethylene - High Density, Copolymer, Injection Molding (Revision B)
GM GMP.E/P.070-1996 Polyolefin Alloy - 20% Mineral Filled, UV Stable
GM 9985042-1994 Adhesive - ABS Polymer
GM GMP.PP.048-1992 Polypropylene - High Flow, Injection Molding Homopolymer
GM GMP.PP.026-1994 Polypropylene - 25% Mineral Filled, UV Stabilized, Copolymer
GM GMP.PE.006-1988 Polyethylene - High Density, Copolymer, Injection Molding Grade, Pellet Form
GM GMP.POM.007-1994 Acetal - Homopolymer, UV Light Resistant
GM GMP.POM.010-1994 Acetal - Homopolymer, Alloy

United States Navy

NAVY QPL-AS22759-1-2005 WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, COPPER OR COPPER ALLOY [Superseded: NAVY QPL-22759 -42 CANC NOTICE 1, NAVY QPL-22759 -42, NAVY QPL-22759 -41, NAVY QPL-22759 -40, NAVY QPL-22759 -39, NAVY QPL-22759 -38, NAVY QPL-22759 -37, NAVY QPL-2275
NAVY QPL-82633-2-1976 COMPOUND, POLYMERIC ELASTOMER, THERMOSETTING (FOR USE AS BOMB TAIL PAD)
NAVY QPL-AS81044-17-2007 WIRE, ELECTRICAL, CROSSLINKED POLYALKENE, CROSSLINKED ALKANE-IMIDE POLYMER, OR POLYARLYENE INSULATED, COPPER OR COPPER ALLOY [Superseded: NAVY QPL-81044 -17 CANC NOTICE 1, NAVY QPL-81044-17, NAVY QPL-81044-16, NAVY QPL-81044-15, NAVY QPL-81044-14, NAVY
NAVY QPL-AS81044-2011 Wire, Electrical, Crosslinked Polyalkene, Crosslinked Alkane-Imide Polymer, or Polyarlyene Insulated, Copper or Copper Alloy
NAVY QPL-AS81044-QPD-2012 Wire, Electrical, Crosslinked Polyalkene, Crosslinked Alkane-Imide Polymer, or Polyarlyene Insulated, Copper or Copper Alloy
NAVY QPL-AS81044-QPD-2011 Wire, Electrical, Crosslinked Polyalkene, Crosslinked Alkane-Imide Polymer, or Polyarlyene Insulated, Copper or Copper Alloy
NAVY UFGS-35 59 13.14 20-2010 POLYMERIC FENDER PILES
NAVY MIL-P-82658 (1)-1978 POLYMER, LIQUID, POLYBUTADIENE, CARBOXY TERMINATED
NAVY MIL-P-82658-1977 POLYMER, LIQUID, POLYBUTADIENE, CARBOXY TERMINATED

GOSTR

GOST R 57696-2017 Polymer composites. Method for determination of diffuse light transmission factor of building panels
GOST 7480-1973 Polygraphic wire. Specifications
GOST R 57868-2017 Polymer composites. Identification of polymer layers and inclusions by infrared microscopy
GOST R 57859-2017 Polymer composites. Test method for determining resistance of synthetic polymeric materials to fungi

Universal Oil Products Company (UOP)

UOP 905-2008 Platinum Agglomeration by X-Ray Diffraction

Underwriters Laboratories (UL)

UL 83A-2021 UL Standard for Safety Flouropolymer Insulated Wire
UL 1692 BULLETIN-2011 UL Standard for Safety Polymeric Materials – Coil Forms
UL 1692 BULLETIN-2013 UL Standard for Safety Polymeric Materials – Coil Forms
UL 1692 BULLETIN-2005 UL Standard for Safety Polymeric Materials – Coil Forms
UL 1692 BULLETIN-2015 UL Standard for Safety Polymeric Materials – Coil Forms
UL 1692 BULLETIN-2012 UL Standard for Safety Polymeric Materials – Coil Forms

German Institute for Standardization

DIN VDE 0207-6:2004 Insulating and sheathing compounds for cables and flexible cords - Fluorinated polymers
DIN EN ISO 20795-1:2009 Dentistry - Base polymers - Part 1: Denture base polymers (ISO 20795-1:2008); English version of DIN EN ISO 20795-1:2009-02
DIN EN ISO 20795-1:2013-06 Dentistry - Base polymers - Part 1: Denture base polymers (ISO 20795-1:2013); German version EN ISO 20795-1:2013
DIN EN ISO 20795-2:2013-06 Dentistry - Base polymers - Part 2: Orthodontic base polymers (ISO 20795-2:2013); German version EN ISO 20795-2:2013

VDE - VDE Verlag GmbH@ Berlin@ Germany

VDE 0207-6-2004 Insulating and sheathing compounds for cables and flexible cords - Fluorinated polymers

British Standards Institution (BSI)

BS EN ISO 20795-2:2013 Dentistry. Base polymers. Orthodontic base polymers
BS PD IEC/TS 61244-2:2014 Determination of long-term radiation ageing in polymers. Procedures for predicting ageing at low dose rates
BS 7816-2:1997 Determination of long-term radiation ageing in polymers - Procedures for predicting ageing at low dose rates
BS EN ISO 20795-1:2008 Dentistry - Base polymers - Denture base polymers
BS ISO 7270-1:2003+A1:2010 Rubber. Analysis by pyrolytic gas-chromatographic methods. Identification of polymers (single polymers and polymer blends)
BS EN ISO 20795-1:2013 Dentistry. Base polymers. Denture base polymers
BS ISO 7270-1:2020 Rubber. Analysis by pyrolytic gas-chromatographic methods - Identification of polymers (single polymers and polymer blends)
BS EN ISO 20795-2:2010 Dentistry - Base polymers - Orthodontic base polymers
PD IEC TR 61244-4:2019 Determination of long-term radiation ageing in polymers. Effects of different temperatures and dose rates under radiation condition

BELST

STB 1072-97 Polymer-mineral compounds. Specifications

Japanese Industrial Standards Committee (JISC)

JIS T 6506:1998 Synthetic polymer teeth
JIS T 6506:2005 Synthetic polymer teeth
JIS K 6231:1998 Rubber -- Identification of polymers (single polymers and blends) -- Pyrolytic gas chromatographic method
JIS K 7229:1995 Determination of chlorine in chlorine-containing polymers, copolymers and their compounds
JIS A 6008:2022 Roofing sheets of synthetic polymer
JIS K 6231:2004 Rubber -- Identification of polymers (single polymers and blends) -- Pyrolytic gas chromatographic method

International Organization for Standardization (ISO)

ISO 7270:1987 Rubber; Identification of polymers (single polymers and blends); Pyrolytic gas chromatographic method
ISO 20795-2:2013 Dentistry - Base polymers - Part 2: Orthodontic base polymers
ISO 20795-1:2008 Dentistry - Base polymers - Part 1: Denture base polymers
ISO 20795-1:2013 Dentistry - Base polymers - Part 1: Denture base polymers
ISO 7270-1:2020 Rubber — Analysis by pyrolytic gas-chromatographic methods — Part 1: Identification of polymers (single polymers and polymer blends)
ISO 7270-1:2003 Rubber - Analysis by pyrolytic gas-chromatographic methods - Part 1: Identification of polymers (single polymers and polymer blends)
ISO 20795-2:2010 Dentistry — Base polymers — Part 2: Orthodontic base polymers
ISO 5475:1978 Rubber — Identification of polymers — Pyrolytic/gas chromatographic method — Single polymers
ISO 7270-1:2003/Amd 1:2010 Rubber - Analysis by pyrolytic gas-chromatographic methods - Part 1: Identification of polymers (single polymers and polymer blends); Amendment 1

GOST

GOST R 59747.6-2021 Prefilled syringes. Part 6. Plastic barrels for sterilized subassembled syringes ready for filling by dosage forms

PL-PKN

PN J04001-1974 Testing of lead equivalen? X ray shield Radiographic method
PN C89102-1973 Polymeres Oefinitions of ?erms

GSO

OS GSO ISO 7270-1:2015 Rubber -- Analysis by pyrolytic gas-chromatographic methods -- Part 1: Identification of polymers (single polymers and polymer blends)
BH GSO ISO 20795-1:2017 Dentistry -- Base polymers -- Part 1: Denture base polymers
OS GSO ISO 20795-2:2015 Dentistry -- Base polymers -- Part 2: Orthodontic base polymers
GSO ISO 6656:2015 Animal and vegetable fats and oils -- Determination of polyethylene-type polymers
OS GSO ISO 6656:2015 Animal and vegetable fats and oils -- Determination of polyethylene-type polymers

Association Francaise de Normalisation

NF EN ISO 20795-2:2013 Oral medicine - Base polymers - Part 2: polymers for orthodontic base
NF EN ISO 20795-1:2013 Oral medicine - Basic polymers - Part 1: polymers for denture bases
NF S91-213:1996 Dentistry. Synthetic polymer teeth.
NF ISO 7440-1:1993 Road vehicles - Testing of fuel injection equipment - Part 1: injector holder and calibration injector assemblies

European Committee for Standardization (CEN)

EN ISO 20795-1:2008 Dentistry - Base polymers - Part 1: Denture base polymers
EN ISO 20795-1:2013 Dentistry - Base polymers - Part 1: Denture base polymers
EN ISO 20795-2:2010 Dentistry - Base polymers - Part 2: Orthodontic base polymers

ES-AENOR

UNE 53-299 Pt.1-1985 Uses of plasticizing compounds for polyvinyl chloride copolymers and homopolymers
UNE 53-299 Pt.2-1985 Determination of the properties of plasticizing compounds of polyvinyl chloride copolymers and homopolymers

US-FCR

FCR UFGS-35 59 13.14 20-2010 POLYMERIC FENDER PILES

American National Standards Institute （ANSI)

ANSI/ADA 12-2002 Denture Base Polymers
ANSI/ADA 139-2012 Dental Base Polymers

Danish Standards Foundation

DS/EN ISO 20795-1:2013 Dentistry - Base polymers - Part 1: Denture base polymers
DS/EN ISO 20795-2:2013 Dentistry - Base polymers - Part 2: Orthodontic base polymers
DS/ISO 7270:1988 Rubber. Identification of polymers (single polymers and blends). Pyrolytic gas chromatographic method

American Concrete Institute

ACI SP-137-1993 Polymer Concrete

RO-ASRO

STAS 11388/12-1986 SABLES AND CORDS Metkods of test Tests specific to polyethylene compounds

BR-ABNT

ABNT NBR 15723-4-2020 Implants for surgery - Polymeric materials Part 4: Requirements for porous polyethylene polymers
ABNT NBR 15723-3-2020 Implants for surgery - Polymeric materials Part 3: Requirements for polyaryletherketone (PAEK) polymers

GM Global

GMW 15548-2013 Polypropylene Copolymer - UV Stable Mineral Filled Issue 4; English

AENOR

UNE 135340:2017 Vertical signs: Microprismatic polymeric retroreflecting sheetings. Characteristics and test methods.