astm polymer

astm polymer, Total:325 items.

The international standard classification for "astm polymer" includes: Rubber , Lubricants, industrial oils and related products , Dental materials , Raw materials for rubber and plastics , Animal and vegetable fats and oils , Implants for surgery, prosthetics and orthotics , Road equipment and installations .

The Chinese standard classification for "astm polymer" includes: Basic standard and general method for synthetic rubber , Lubricating oil , Stomatologic device, equipment and material , Synthetic resin and plastic , Grease and oil processing and products , Orthopedic devices , Urban highway equipment and facility .

Professional Standard - Petrochemical Industry

SH/T 0103-2007 Standard test method for shear stability of polymer containing fluids using a european diesel injector apparatus
SH/T 1764.1-2008 Rubber-Analysis by pyrolytic gas-chromatographic methods-Part 1:Identification of polymers(single polymers and polymer blends)

Professional Standard - Chemical Industry

HG/T 5517～5518-2019 Polymer coated urea and polymer sulfur coated urea (2019)

Group Standards of the People's Republic of China

T/HEBQIA 025-2021 vegetable polymer fuel oil
T/CADBM 77-2024 Polymer modified decorative cement
T/ZAQ 10109-2022 Composite polymer for permeable mortar
T/ZZB Q059-2022 Composite polymer for permeable mortar
T/PLQ 0003-2018 polymer modified bitumen
T/CECS 10192-2022 Polymer micro-cement

Professional Standard - Medicine

YY/T 0270.2-2011 Dentistry—Base polymers—Part 2:Orthodontic base polymers
YY 0270.1-2011 Dentistry-Base polymers-Part 1:Denture base polymers
YY 0270.1-2011/ISO 20795-1:2008 Dentistry--Base polymers--Paet 1:Denture base polymers

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 22480-2008 Animal and vegetable fats and oils—Determination of polyethylene-type polymers
GB 8325-1987 Determination for pH of aqueous dispersions of polymers and copolymers
GB/T 31062-2014 Polymeric polyols
GB/T 8325-1987 Determination for pH of aqueous dispersions of polymers and copolymers

未注明发布机构

DIN EN ISO 20795-1 E:2012-10 Dental raw material polymers Part 1: Denture raw material polymers (draft)
DIN EN ISO 20795-2 E:2012-10 Dental Raw Polymers Part 2: Dental Raw Polymers (Draft)
DIN EN ISO 17304 E:2012-08 Dental polymerization shrinkage: Method for determination of polymerization shrinkage of polymer-based restorative materials (draft)
DIN 65262-1 E:2016-10 Aerospace series - Sealing compounds - Part 1: Polysulphide polymer base, Technical specification
ANSI/ADA 182-2021 Test Method for the Bonding Test Between Polymer Teeth and Denture Base Polymer
DIN 7724:1972 Polymeric materials; grouping of polymeric materials based on their mechanical behaviour
ANSI/ADA 27-2022 Polymer - based Restorative Materials

国家食品药品监督管理局

YY/T 0661-2017 Standard specification for semi-Crystalline poly ( lactide) polymer and copolymer resin for surgical implants

工业和信息化部

HG/T 5518-2019 Polymer sulfur coated urea
HG/T 5517-2019 Polymer coated urea
HG/T 5875-2021 Polyacrylamide polymer mud for pile foundation

Taiwan Provincial Standard of the People's Republic of China

CNS 14184-1998 Polymer-modified paving asphalt

Professional Standard - Urban Construction

CJ/T 212-2005 Water grate made of polymer matrix composites
CJ/T 544-2021 polymer permeable concrete

Professional Standard - Petroleum

SY/T 6462-2000 Polymer injection pump for oilfield
SY/T 6462-2012 Polymer Injection Pump for Oilfield

国家能源局

SY/T 6462-2019 Polymer injection pump for oilfield

SCC

MIL MIL-M-14/4-1990 MOLDING COMPOUNDS, POLYESTER, THERMOSETTING, CONTAINING MINERAL/GLASS FILLERS (S/S BY ASTM-D5948-1996E1)
NS-EN ISO/ASTM 52924:2023 Additive manufacturing of polymers - Qualification principles - Classification of part properties (ISO/ASTM 52924:2023)
DANSK DS/EN ISO/ASTM 52924:2023 Additive manufacturing of polymers – Qualification principles – Classification of part properties (ISO/ASTM 52924:2023)
DANSK DS/EN ISO/ASTM 52925:2022 Additive manufacturing of polymers – Feedstock materials – Qualification of materials for laser-based powder bed fusion of parts (ISO/ASTM 52925:2022)
NS-EN ISO/ASTM 52925:2022 Additive manufacturing of polymers - Feedstock materials - Qualification of materials for laser-based powder bed fusion of parts (ISO/ASTM 52925:2022)
MIL MIL-M-14/3-1990 MOLDING COMPOUNDS, MELAMINE, THERMOSETTING, CONTAINING CELLULOSE, MINERAL, OR GLASS FILLERS (S/S BY ASTM-D5948-1996E1)
DIN EN ISO /ASTM 52925 E:2020 Draft Document - Additive manufacturing processes - Laser sintering of polymer parts/laser-based powder bed fusion of polymer parts - Qualification of materials (ISO/ASTM DIS 52925:2020); German and English version prEN ISO/ASTM 52925:2020
MIL MIL-M-14/5-1990 MOLDING COMPOUNDS, DIALLYL ISO-PHTHALATE THERMOSETTING, CONTAINING MINERAL FILLERS, GLASS OR POLYMERIC FILLERS(S/S BY ASTM-D5948-1996E1)
AENOR UNE-EN ISO/ASTM 52911-2:2020 Additive manufacturing - Design - Part 2: Laser-based powder bed fusion of polymers (ISO/ASTM 52911-2:2019)
DANSK DS/EN ISO 52911-2:2019 Additive manufacturing – Design – Part 2: Laser-based powder bed fusion of polymers (ISO/ASTM 52911-2:2019)
MIL MIL-M-14/6-1990 MOLDING COMPOUNDS, DIALLYL ORTHO-PHTHALATE, THERMOSETTING, CONTAINING MINERAL FILLERS, GLASS OR POLYMERIC FILLERS (S/S BY ASTM-D5948-1996E1)
NS-EN ISO/ASTM 52911-2:2019 Additive manufacturing - Design - Part 2: Laser-based powder bed fusion of polymers (ISO/ASTM 52911-2:2019)
BS ISO 7270-1:2003 Rubber. Analysis by pyrolytic gas-chromatographic methods. Identification of polymers (single polymers and polymer blends)
MIL MIL-P-22241B-1973 PLASTIC SHEET (AND FILM) POLYTETRAFLUOROETHYLENE (TFE - FLUOROCARBON RESIN) (S/S BY ASTM-D3308-1997, ASTM-D3369-1996 AND ASTM-D3293-1991A)
AASHTO M 246-2015(2019) Standard Specification for Steel Sheet, Metallic-Coated and Polymer-Precoated, for Corrugated Steel Pipe (ASTM Designation: A742/A742M-13)
AASHTO M 246-2022 Standard Specification for Steel Sheet, Metallic-Coated and Polymer-Precoated, for Corrugated Steel Pipe (ASTM Designation: A742/A742M-13)
DANSK DS/EN ISO 20795-1:2013 Dentistry - Base polymers - Part 1: Denture base polymers
MIL MIL-T-13827-1954 TUNGSTEN POWDER (S/S BY ASTM-B777-1999, ASTM-E159-2000, ASTM-B329-1998, ASTM-B215-1996, ASTM-E826-1985(R96)E1)
DANSK DS/EN ISO 20795-2:2013 Dentistry - Base polymers - Part 2: Orthodontic base polymers
AASHTO M 246-2005(2011) Standard Specification for Steel Sheet, Metallic-Coated and Polymer-Precoated, for Corrugated Steel Pipe (ASTM Designation: A742/A742M-03)
AASHTO M 245-2000(2012) Standard Specification for Corrugated Steel Pipe, Polymer-Precoated, for Sewers and Drains (ASTM Designation: A 762/A 762M-98)
DIN EN ISO /ASTM 52924 E:2020 Draft Document - Additive manufacturing - Qualification principles - Classification of part properties for additive manufacturing of polymer parts (ISO/ASTM DIS 52924:2020); German and English version prEN ISO/ASTM 52924:2020
DANSK DS/ISO 13781:2017 Implants for surgery – Homopolymers, copolymers and blends on poly(lactide) – In vitro degradation testing
ADA 139-2012 Dental Base Polymers
HOLDEN HN 1447-2001 Methylpentene Polymer
HOLDEN HN 1415-2012 Polyamide 12 Compounds
MIL MIL-R-46198-1988 RESIN, POLYIMIDE, HOT PRESSED OR PRESSED AND SINTERED (S/S BY ASTM-PS93-1998)
ADA 12-1999(R2008) Denture Base Polymers
HOLDEN HN 1415-2001 Polyamide 12 Compounds
HOLDEN HN 2147-2002 Polymer Coating Powder
AASHTO T 210-2015(2019) Standard Method of Test for Aggregate Durability Index (ASTM Designation: D3744/D3744M-11a)
NS-EN ISO/ASTM 52936-1:2023 Additive manufacturing of polymers - Qualification principles - Part 1: General principles and preparation of test specimens for PBF-LB (ISO/ASTM 52936-1:2023)
DANSK DS/EN ISO/ASTM 52936-1:2023 Additive manufacturing of polymers – Qualification principles – Part 1: General principles and preparation of test specimens for PBF-LB (ISO/ASTM 52936-1:2023)
DANSK DS/EN ISO 17304:2013 Dentistry - Polymerization shrinkage: Method for determination of polymerization shrinkage of polymer-based restorative materials
MIL MIL-M-14/7-1990 MOLDING COMPOUNDS, SILICONE, THERMOSETTING, CONTAINING MINERAL/GLASS FILLERS(S/S BY ASTM-D5948-1996E1)
MIL MIL-M-14/8-1990 MOLDING COMPOUNDS, EPOXY THERMOSETTING, CONTAINING MINERAL/GLASS FILLERS (S/S BY ASTM-D5948-1996E1)
MIL MIL-PRF-32597-2018 CLEANER, POLYMER AND POLYMER MATRIX COMPOSITE (PMC) MATERIAL, NON-AQUEOUS, HAP-FREE
NS-EN 13632:2003 Bitumen and bituminous binders — Visualisation of polymer dispersion in polymer modified bitumen
MIL MIL-PRF-32597A-2020 CLEANER, POLYMER AND POLYMER MATRIX COMPOSITE (PMC) MATERIAL, NON-AQUEOUS, HAP-FREE
ADA 182-2021 Test Method for the Bonding Test Between Polymer Teeth and Denture Base Polymer
NS-EN ISO 20795-2:2013 Dentistry — Base polymers — Part 2: Orthodontic base polymers (ISO 20795-2:2013)
08/30168864 DC BS ISO 20795-2. Dentistry. Base polymers. Part 2. Orthodontic base polymers
NS-EN ISO 20795-1:2013 Dentistry — Base polymers — Part 1: Denture base polymers (ISO 20795-1:2013)
07/30164125 DC BS ISO 20795-1. Dentistry. Base polymers. Part 1. Denture base polymers
UNE-EN ISO 20795-1:2009 Dentistry - Base polymers - Part 1: Denture base polymers (ISO 20795-1:2008)
NS-EN ISO 20795-2:2010 Dentistry — Base polymers — Part 2: Orthodontic base polymers (ISO 20795-2:2010)
UNE-EN ISO 20795-2:2010 Dentistry - Base polymers - Part 2: Orthodontic base polymers (ISO 20795-2:2010)
ADA 27-2016 Polymer-based Restorative Materials
BS PD CEN/TS 19101:2022 Design of fibre-polymer composite structures
UNE-EN 13632:2004 Bitumen and bituminous binders - Visualisation of polymer dispersion in polymer modified bitumen
DANSK DS/EN 13632:2010 Bitumen and bituminous binders - Visualisation of polymer dispersion in polymer modified bitumen
NS-EN 13632:2010 Bitumen and bituminous binders — Visualisation of polymer dispersion in polymer modified bitumen
MIL MIL-D-82710-1984 DELAY COMPOSITION, TUNGSTEN FLUOROCARBON COPOLYMER
ADA 27-2022 Polymer-based Restorative Materials
HOLDEN HN 1857-2001 Thermo Plastic Polyester Compounds
SN-CEN/TS 19101:2022 Design of fibre-polymer composite structures
HOLDEN HN 1592-2009 MOULDING COMPOUND - POLYURETHANE
AS K125:1963 Polyethylene (polythene) pipe extrusion compounds
MIL MIL-P-82658-1977 POLYMER, LIQUID, POLYBUTADIENE, CARBOXY TERMINATED
CEI 15-61:1997 Solventless polymerizable resin compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 11: Coating powders based on epoxy resins
DIN CEN/TS 19101:2023 Design of fibre-polymer composite structures; German version CEN/TS 19101:2022
ADA 53-2008(R2013) Polymer-based Crown and Bridge Materials
MIL MIL-P-46184-1982 PLASTIC MOLDING & EXTRUSION MATERIAL, POLYETHERIMIDE (PEI) (S/S BY ASTM-D5205-1996)
12/30266392 DC BS EN ISO 20795-1. Dentistry. Base polymers. Part 1. Denture base polymers
12/30266398 DC BS EN ISO 20795-2. Dentistry. Base polymers. Part 2. Orthodontic base polymers
DANSK DS/CEN/TS 19101:2022 Design of fibre-polymer composite structures
AWWA JAW36089 Journal AWWA — Effects of Ozonation on Coagulation of NOM Using Polymer Alone and Polymer/Metal Salt Mixtures
ASTM 12-94 Nep Scale Standard and Vegetable Matter Standard - for Use with ASTM D1770-94
MIL MIL-P-46179A-1986 PLASTIC MOLDING AND EXTRUSION MATERIALS, POLYAMIDE-IMIDE (PAI) (S/S BY ASTM-D5204-1999)

Defense Logistics Agency

DLA L-P-390C-1971 PLASTIC, MOLDING AND EXTRUSION MATERIAL, POLYETHYLENE AND COPOLYMERS (LOW, MEDIUM, AND HIGH DENSITY) [Refer To: ASTM D4976 REV A, ASTM D4976, ASTM D4976, ASTM D4976 REV A, ASTM D4976, ASTM D4976, ASTM D4976, ASTM D4976 REV B, ASTM D4976 REV A, ASTM D49
DLA L-P-390 C (2)-1984 PLASTIC, MOLDING AND EXTRUSION MATERIAL, POLYETHYLENE AND COPOLYMERS (LOW, MEDIUM, AND HIGH DENSITY) [Refer To: ASTM D4976, ASTM D4976 REV A, ASTM D4976, ASTM D4976, ASTM D4976, ASTM D4976 REV B, ASTM D4976 REV A, ASTM D4976, ASTM D4976, ASTM D4976, AS
DLA L-P-390 C-1971 PLASTIC, MOLDING AND EXTRUSION MATERIAL, POLYETHYLENE AND COPOLYMERS (LOW, MEDIUM, AND HIGH DENSITY) [Refer To: ASTM D4976, ASTM D4976 REV A, ASTM D4976, ASTM D4976, ASTM D4976, ASTM D4976 REV B, ASTM D4976 REV A, ASTM D4976, ASTM D4976, ASTM D4976, AS
DLA L-P-390 C NOTICE 2-2000 PLASTIC, MOLDING AND EXTRUSION MATERIAL, POLYETHYLENE AND COPOLYMERS (LOW, MEDIUM, AND HIGH DENSITY) [Refer To: ASTM D4976, ASTM D4976 REV A, ASTM D4976, ASTM D4976, ASTM D4976, ASTM D4976 REV B, ASTM D4976 REV A, ASTM D4976, ASTM D4976, ASTM D4976, AS
DLA MIL-L-3891B NOTICE 2-1999 LUMINESCENT MATERIAL AND EQUIPMENT (NONRADIOACTIVE) [Refer To: ASTM E2030 REV A, ASTM E2030, ASTM E2030, ASTM E2030, ASTM E2030 REV A, ASTM E2030, ASTM E2030, ASTM E2030, ASTM E2030, ASTM E2072, ASTM E2072, ASTM E2072, ASTM E2072, ASTM E2072, ASTM E2073

German Institute for Standardization

DIN EN ISO/ASTM 52924:2023 Additive manufacturing of polymers - Qualification principles - Classification of part properties (ISO/ASTM 52924:2023)
DIN EN ISO/ASTM 52924:2023-12 Additive manufacturing of polymers - Qualification principles - Classification of part properties (ISO/ASTM 52924:2023); German version EN ISO/ASTM 52924:2023
DIN EN ISO/ASTM 52925:2020 Additive manufacturing processes - Laser sintering of polymer parts/laser-based powder bed fusion of polymer parts - Qualification of materials (ISO/ASTM DIS 52925:2020); German and English version prEN ISO/ASTM 52925:2020
DIN EN ISO/ASTM 52911-2:2020 Additive manufacturing - Design - Part 2: Laser-based powder bed fusion of polymers (ISO/ASTM 52911-2:2019)
DIN EN ISO/ASTM 52925:2023 Additive manufacturing of polymers - Feedstock materials - Qualification of materials for laser-based powder bed fusion of parts (ISO/ASTM 52925:2022)
DIN EN ISO/ASTM 52924:2020 Additive manufacturing - Qualification principles - Classification of part properties for additive manufacturing of polymer parts (ISO/ASTM DIS 52924:2020); German and English version prEN ISO/ASTM 52924:2020
DIN EN ISO 20795-1:2009 Dentistry - Base polymers - Part 1: Denture base polymers (ISO 20795-1:2008); English version of DIN EN ISO 20795-1:2009-02
DIN EN ISO 20795-2:2013-06 Dentistry - Base polymers - Part 2: Orthodontic base polymers (ISO 20795-2:2013); German version EN ISO 20795-2:2013
DIN EN ISO 20795-1:2013-06 Dentistry - Base polymers - Part 1: Denture base polymers (ISO 20795-1:2013); German version EN ISO 20795-1:2013
DIN EN ISO 17304:2014-03 Dentistry - Polymerization shrinkage: Method for determination of polymerization shrinkage of polymer-based restorative materials (ISO 17304:2013); German version EN ISO 17304:2013
DIN 7724:1993 Polymeric materials; grouping of polymeric materials based on their mechanical behaviour
DIN 13998:2012 Dentistry - Test method for the bonding test between polymer teeth and denture base polymer
DIN EN 13632:2010-11 Bitumen and bituminous binders - Visualisation of polymer dispersion in polymer modified bitumen; German version EN 13632:2010
DIN ISO 2028:2004 Synthetic rubber latex - Preparation of dry polymer (ISO 2028:1999)
DIN 65262-1:2017 Aerospace series - Sealing compounds - Part 1: Polysulphide polymer base, Technical specification; Text in German and English

DIN

DIN EN ISO /ASTM 52924:2023 Additive manufacturing of polymers - Qualification principles - Classification of part properties (ISO/ASTM 52924:2023)
DIN EN ISO /ASTM 52925:2023 Additive manufacturing of polymers - Feedstock materials - Qualification of materials for laser-based powder bed fusion of parts (ISO/ASTM 52925:2022)
DIN EN ISO /ASTM 52925:2022 Additive manufacturing of polymers - Feedstock materials - Qualification of materials for laser-based powder bed fusion of parts (ISO/ASTM 52925:2022); German version EN ISO/ASTM 52925:2022
DIN EN ISO /ASTM 52911-2:2020 Additive manufacturing - Design - Part 2: Laser-based powder bed fusion of polymers (ISO/ASTM 52911-2:2019)
DIN EN ISO /ASTM 52936-1:2023 Additive manufacturing of polymers - Qualification principles - Part 1: General principles and preparation of test specimens for PBF-LB (ISO/ASTM 52936-1:2023); German version EN ISO/ASTM 52936-1:2023
DIN EN 13632:2004 Bitumen and bituminous binders - Visualisation of polymer dispersion in polymer modified bitumen

European Committee for Standardization (CEN)

EN ISO/ASTM 52924:2023 Additive manufacturing of polymers - Qualification principles - Classification of part properties (ISO/ASTM 52924:2023)
EN ISO/ASTM 52911-2:2019 Additive manufacturing - Design - Part 2: Laser-based powder bed fusion of polymers (ISO/ASTM 52911-2:2019)
FprEN ISO/ASTM 52924 Additive manufacturing of polymers - Qualification principles - Classification of part properties (ISO/ASTM/FDIS 52924:2023)
EN ISO/ASTM 52925:2022 Additive manufacturing of polymers - Feedstock materials - Qualification of materials for laser-based powder bed fusion of parts (ISO/ASTM 52925:2022)
EN ISO 20795-1:2008 Dentistry - Base polymers - Part 1: Denture base polymers
EN ISO 20795-1:2013 Dentistry - Base polymers - Part 1: Denture base polymers
EN ISO 20795-2:2010 Dentistry - Base polymers - Part 2: Orthodontic base polymers
prEN ISO/ASTM 52936-1:2021 Additive manufacturing of polymers - Powder bed fusion - Part 1: General principles and preparation of test specimens for PBF-LB (ISO/ASTM DIS 52936-1:2021)
EN ISO 305:1999 Plastics - Determination of Thermal Stability of Poly (Vinyl Chloride), Related Chlorine-Containing Homopolymers and Copolymers and Their Compounds - Discoloration Method

British Standards Institution (BSI)

20/30416706 DC BS EN ISO/ASTM 52925. Additive manufacturing processes. Laser sintering of polymer parts/laser-based powder bed fusion of polymer parts. Qualification of materials
BS EN ISO 20795-2:2013 Dentistry. Base polymers. Orthodontic base polymers
BS ISO 7270-1:2020 Rubber. Analysis by pyrolytic gas-chromatographic methods - Identification of polymers (single polymers and polymer blends)
BS EN ISO 20795-1:2008 Dentistry - Base polymers - Denture base polymers
BS ISO 7270-1:2003+A1:2010 Rubber. Analysis by pyrolytic gas-chromatographic methods. Identification of polymers (single polymers and polymer blends)
BS EN ISO 20795-1:2013 Dentistry. Base polymers. Denture base polymers
20/30416702 DC BS EN ISO/ASTM 52924. Additive manufacturing. Qualification principles. Classification of part properties for additive manufacturing of polymer parts
BS EN ISO 20795-2:2010 Dentistry - Base polymers - Orthodontic base polymers
BS ISO 6656:2002 Animal and vegetable fats and oils - Determination of polyethylene-type polymers
BS EN 13632:2010 Bitumen and bituminous binders. Visualisation of polymer dispersion in polymer modified bitumen

(U.S.) Plastic Pipe Association

PPI TN-47-2013 POLYETHYLENE RESIN TESTING REQUIREMENTS TO SUPPORT ASTM D2513 UV EXPOSURE LIMITS OF POLYETHYLENE COMPOUND

GM North America

GM 9985574-1994 Adhesive, Urethane, Polymer
GM 9985573-1994 Adhesive, Urethane, Polymer
GM 9985042-1994 Adhesive - ABS Polymer
GM GMP.POM.010-1994 Acetal - Homopolymer, Alloy
GM 9986047-1995 Polyurethane Isocyanate, Low Density Polymer

AASHTO - American Association of State Highway and Transportation Officials

M 17-1995 Standard Specification for Mineral Filler for Bituminous Paving Mixtures (ASTM Designation: ASTM D242-95 (2000))
T165-1991 Standard Specification for Effect of Water on Cohesion of Compacted Bituminous Mixtures (Eighteenth Edition; ASTM D1075-94)
T165-1997 Standard Specification for Effect of Water on Cohesion of Compacted Bituminous Mixtures (Nineteenth Edition; ASTM D1075-94)
M246/M246M-1987 Standard Specification for Steel Sheet@ Metallic-Coated and Polymer Precoated for Corrugated Steel Pipe (ASTM A742/A742M-86)
M 245M/M 245-1991 Standard Specification for Corrugated Steel Pipe@ Polymer Precoated@ for Sewers and Drains (ASTM A762/A762M-90)
M245-2000 Standard Specification for Corrugated Steel Pipe@ Polymer Precoated@ for Sewers and Drains (Twentieth Edition; ASTM A762/A762M-98)
M246M-1987 Standard Specification for Steel Sheet@ Metallic-Coated and Polymer Precoated@ for Corrugated Steel Pipe (Nineteenth Edition; ASTM A742/A742M-93)
M246-2000 Standard Specification for Steel Sheet@ Metallic-Coated and Polymer Precoated@ for Corrugated Steel Pipe (Twentieth Edition; ASTM A742/A742M-98)
T 302-2004 Standard Method of Test for Polymer Content of Polymer-Modified Emulsions and Asphalt Binders
T 165-2002 Standard Method of Test for Effect of Water on Cohesion of Compacted Bituminous Mixtures (HM-22; Part IIA; ASTM Designation: D 1075-96)
T302-1994 Standard Method of Test for Polymer Content of Polymer Modified Emulsions (Nineteenth Edition)
T302-1995 Standard Method of Test for Polymer Content of Polymer Modified Emulsions (Eighteenth Edition)

BELST

STB 1072-97 Polymer-mineral compounds. Specifications

Korean Agency for Technology and Standards (KATS)

KS M 3826-1993 Determination of Chlorine in Chlorine-containing Polymers,Copolymers and their Compounds
KS M ISO 7270-1-2007(2017) Rubber－Analysis by pyrolytic gas-chromatographic methods－Part 1：Identification of polymers(single polymers and polymer blends)
KS F 4911-2017 Waterproofing sheets of synthetic polymer
KS M ISO 7270-1-2007(2022) Rubber－Analysis by pyrolytic gas-chromatographic methods－Part 1：Identification of polymers(single polymers and polymer blends)
KS P ISO 20795-1:2020 Dentistry — Base polymers — Part 1: Denture base polymers
KS P ISO 20795-2:2011 Dentistry－Base polymers－Part 2：Orthodontic base polymers
KS F 4911-2023 Waterproofing sheets of synthetic polymer
KS F 4911-1984 Waterproofing sheets of synthetic polymer
KS P ISO 20795-2-2011(2016) Dentistry－Base polymers－Part 2：Orthodontic base polymers
KS M ISO 7270-1:2007 Rubber－Analysis by pyrolytic gas-chromatographic methods－Part 1：Identification of polymers(single polymers and polymer blends)
KS P ISO 20795-1:2010 Dentistry-Base polymers-Part 1:Denture base polymers
KS P ISO 20795-2:2021 Dentistry — Base polymers — Part 2: Orthodontic base polymers
KS P ISO 20795-1:2014 Dentistry－Base polymers－Part 1：Denture base polymers
KS P 5304-2003 Dentistry－Synthetic polymer teeth
KS P 5304-1986 Dentistry－Synthetic polymer teeth
KS H ISO 6656:2008 Animal and vegetable fats and oils-Determination of polyethylene-type polymers
KS H ISO 6656-2023 Animal and vegetable fats and oils－Determination of polyethylene-type polymers
KS F 4911-2019 Waterproofing sheets of synthetic polymer
KS M 3812-2007 WATERPROOFING SHEETS OF RECYCLED SYNTHETIC POLYMER
KS H ISO 6656-2008(2018) Animal and vegetable fats and oils－Determination of polyethylene-type polymers
KS P ISO 13781:2019 Implants for surgery — Homopolymers, copolymers and blends on poly(lactide) — In vitro degradation testing
KS F 4916-2009 Polymer for cement modifiers
KS P ISO 17304:2017 Dentistry ─ Polymerization shrinkage: Method for determination of polymerization shrinkage of polymer-based restorative materials
KS M ISO 2028:2010 Synthetic rubber latex－Preparation of dry polymer

KR-KS

KS M ISO 7270-1-2023 Rubber — Analysis by pyrolytic gas-chromatographic methods — Part 1: Identification of polymers (single polymers and polymer blends)
KS P ISO 20795-1-2020 Dentistry — Base polymers — Part 1: Denture base polymers
KS P ISO 20795-2-2021 Dentistry — Base polymers — Part 2: Orthodontic base polymers
KS P ISO 13781-2019 Implants for surgery — Homopolymers, copolymers and blends on poly(lactide) — In vitro degradation testing
KS H ISO 6656-2008(2023) Animal and vegetable fats and oils－Determination of polyethylene-type polymers
KS P ISO 17304-2022 Dentistry Polymerization shrinkage: Method for determination of polymerization shrinkage of polymer based restorative materials

Japanese Industrial Standards Committee (JISC)

JIS T 6506:1998 Synthetic polymer teeth
JIS T 6506:2005 Synthetic polymer teeth
JIS K 6231:1998 Rubber -- Identification of polymers (single polymers and blends) -- Pyrolytic gas chromatographic method
JIS K 7229:1995 Determination of chlorine in chlorine-containing polymers, copolymers and their compounds
JIS A 6008:2022 Roofing sheets of synthetic polymer
JIS K 6231:2004 Rubber -- Identification of polymers (single polymers and blends) -- Pyrolytic gas chromatographic method
JIS A 6203:2000 Polymer dispersions and redispersible polymer powders for cement modifiers
JIS A 6008:2002 Roofing sheets of synthetic polymer
JIS A 6203:2015 Polymer dispersions and redispersible polymer powders for cement modifiers
JIS A 6203:1996 Polymer dispersions and redispersible polymer powders for cement modifiers

International Organization for Standardization (ISO)

ISO 7270:1987 Rubber; Identification of polymers (single polymers and blends); Pyrolytic gas chromatographic method
ISO 20795-2:2013 Dentistry - Base polymers - Part 2: Orthodontic base polymers
ISO 20795-1:2008 Dentistry - Base polymers - Part 1: Denture base polymers
ISO 7270-1:2020 Rubber — Analysis by pyrolytic gas-chromatographic methods — Part 1: Identification of polymers (single polymers and polymer blends)
ISO 20795-1:2013 Dentistry - Base polymers - Part 1: Denture base polymers
ISO 7270-1:2003 Rubber - Analysis by pyrolytic gas-chromatographic methods - Part 1: Identification of polymers (single polymers and polymer blends)
ISO 20795-2:2010 Dentistry — Base polymers — Part 2: Orthodontic base polymers
ISO 5475:1978 Rubber — Identification of polymers — Pyrolytic/gas chromatographic method — Single polymers
ISO 7270-1:2003/Amd 1:2010 Rubber - Analysis by pyrolytic gas-chromatographic methods - Part 1: Identification of polymers (single polymers and polymer blends); Amendment 1
ISO 3336:1993 Dentistry; synthetic polymer teeth
ISO 305:1976 Plastics — Determination of thermal stability of polyvinyl chloride, related chlorine-containing polymers and copolymers, and their compounds — Discoloration method
ISO 2898-2:1989 Plastics; plasticized compounds of homopolymers and copolymers of vinyl chloride (PVC-P); part 2: preparation of test specimens and determination of properties
ISO 6656:1984 Animal and vegetable fats and oils; Determination of polyethylene-type polymers
ISO 6656:2002 Animal and vegetable fats and oils - Determination of polyethylene-type polymers
ISO 305:1990 Plastics; determination of thermal stability of poly(vinyl chloride), related chlorine-containing homopolymers and copolymers and their compounds; discoloration method
ISO 2028:1974 Title missing - Legacy paper document
ISO 2028:1999 Synthetic rubber latex - Preparation of dry polymer
ISO 20795-1:2008/Cor 1:2009 Dentistry - Base polymers - Part 1: Denture base polymers; Technical Corrigendum 1
ISO 2028:2015 Synthetic rubber latex - Preparation of dry polymer

GOSTR

GOST R 57868-2017 Polymer composites. Identification of polymer layers and inclusions by infrared microscopy
GOST R 57859-2017 Polymer composites. Test method for determining resistance of synthetic polymeric materials to fungi
GOST R 57748-2017 Composite polymers. Method for in situ determination of polymer network parameters of cross-linked ultra high molecular weight polyethylene in solvent

GSO

OS GSO ISO 7270-1:2015 Rubber -- Analysis by pyrolytic gas-chromatographic methods -- Part 1: Identification of polymers (single polymers and polymer blends)
BH GSO ISO 20795-1:2017 Dentistry -- Base polymers -- Part 1: Denture base polymers
OS GSO ISO 20795-2:2015 Dentistry -- Base polymers -- Part 2: Orthodontic base polymers
GSO ISO 6656:2015 Animal and vegetable fats and oils -- Determination of polyethylene-type polymers
OS GSO ISO 6656:2015 Animal and vegetable fats and oils -- Determination of polyethylene-type polymers
BH GSO ISO 17304:2017 Dentistry -- Polymerization shrinkage: Method for determination of polymerization shrinkage of polymer-based restorative materials
GSO ISO 17304:2016 Dentistry -- Polymerization shrinkage: Method for determination of polymerization shrinkage of polymer-based restorative materials
OS GSO ISO 17304:2016 Dentistry -- Polymerization shrinkage: Method for determination of polymerization shrinkage of polymer-based restorative materials
GSO ISO 20795-2:2015 Dentistry -- Base polymers -- Part 2: Orthodontic base polymers
OS GSO ISO 2028:2015 Synthetic rubber latex -- Preparation of dry polymer
GSO ISO 2028:2015 Synthetic rubber latex -- Preparation of dry polymer

RU-GOST R

GOST 12302-2013 Packs made of polymeric films and composite materials. General specifications
GOST 33742-2016 Polymer composites. Classification
GOST 28614-1990 Rubber. Identification of polymers (single polymers and blends) by pyrolytic gas chromatographic method
GOST R 50579-1993 Polymer composites. Classification
GOST 32588-2013 Polymer composites. List of properties
GOST R 50583-1993 Polymer composites. List of properties
GOST R 51720-2001 Polymeric sacks. General specifications
GOST 32521-2013 Polymeric sacks. General specifications

Association Francaise de Normalisation

NF EN ISO 20795-2:2013 Oral medicine - Base polymers - Part 2: polymers for orthodontic base
NF EN ISO 20795-1:2013 Oral medicine - Basic polymers - Part 1: polymers for denture bases
NF S91-213:1996 Dentistry. Synthetic polymer teeth.
NF S91-229*NF EN ISO 17304:2014 Dentistry - Polymerisation shrinkage : method for determination of polymerisation shrinkage of polymer-based restorative materials
NF T60-240*NF ISO 6656:2003 Animal and vegetable fats and oils - Determination of polyethylene-type polymers
NF EN 13632:2010 Bitumens and bituminous binders - Visualization of polymer dispersion in polymer-modified bitumens
NF T51-052*NF ISO 1148:1988 Plastics. Aqueous dispersions of polymers and copolymers. Determination of ph.
NF ISO 6656:2003 Fats of animal and vegetable origin - Dosage of polyethylene type polymers

ES-AENOR

UNE 53-299 Pt.1-1985 Uses of plasticizing compounds for polyvinyl chloride copolymers and homopolymers
UNE 53-299 Pt.2-1985 Determination of the properties of plasticizing compounds of polyvinyl chloride copolymers and homopolymers

American Society for Testing and Materials (ASTM)

ASTM D5260-04 Standard Classification for Chemical Resistance of Poly(Vinyl Chloride) (PVC) Homopolymer and Copolymer Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds
ASTM D5260-22 Standard Classification for Chemical Resistance of Poly(Vinyl Chloride) (PVC) Homopolymer and Copolymer Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds
ASTM D5260-97 Standard Classification for Chemical Resistance of Poly(Vinyl Chloride) (PVC) Homopolymer and Copolymer Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds
ASTM D5260-16 Standard Classification for Chemical Resistance of Poly(Vinyl Chloride) (PVC) Homopolymer and Copolymer Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds
ASTM F794-21 Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Gravity Sewer Pipe and Fittings Based on Controlled Inside Diameter
ASTM D1784-99ae1 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds
ASTM D5260-04(2010) Standard Classification for Chemical Resistance of Poly(Vinyl Chloride) (PVC) Homopolymer and Copolymer Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds
ASTM D2287-12 Standard Specification for Nonrigid Vinyl Chloride Polymer and Copolymer Molding and Extrusion Compounds
ASTM D2287-81(1988)e1 Standard Specification for Nonrigid Vinyl Chloride Polymer and Copolymer Molding and Extrusion Compounds
ASTM D2287-11 Standard Specification for Nonrigid Vinyl Chloride Polymer and Copolymer Molding and Extrusion Compounds
ASTM D7258-23 Standard Specification for Polymeric Piles
ASTM D2287-96(2010) Standard Specification for Nonrigid Vinyl Chloride Polymer and Copolymer Molding and Extrusion Compounds

US-FCR

FCR UFGS-35 59 13.14 20-2010 POLYMERIC FENDER PILES

United States Navy

NAVY UFGS-35 59 13.14 20-2010 POLYMERIC FENDER PILES
NAVY MIL-P-82658 (1)-1978 POLYMER, LIQUID, POLYBUTADIENE, CARBOXY TERMINATED
NAVY MIL-P-82658-1977 POLYMER, LIQUID, POLYBUTADIENE, CARBOXY TERMINATED
NAVY MIL-DTL-82633 A-2011 COMPOUND, POLYMERIC ELASTOMER, THERMOSETTING

American National Standards Institute （ANSI)

ANSI/ADA 12-2002 Denture Base Polymers
ANSI/ADA 139-2012 Dental Base Polymers
ANSI/ASTM D5260:1997 Chemical Resistance of Poly(Vinyl Chloride) (PVC) Homopolymer and Copolymer Compounds and Chlorinatd Poly(Vinyl Chloride) (CPVC) compounds, Classification for (08.03)

Danish Standards Foundation

DS/EN ISO 20795-1:2013 Dentistry - Base polymers - Part 1: Denture base polymers
DS/EN ISO 20795-2:2013 Dentistry - Base polymers - Part 2: Orthodontic base polymers
DS/ISO 7270:1988 Rubber. Identification of polymers (single polymers and blends). Pyrolytic gas chromatographic method
DS/EN 13632:2010 Bitumen and bituminous binders - Visualisation of polymer dispersion in polymer modified bitumen

American Concrete Institute

ACI SP-137-1993 Polymer Concrete

BR-ABNT

ABNT NBR 15723-3-2020 Implants for surgery - Polymeric materials Part 3: Requirements for polyaryletherketone (PAEK) polymers
ABNT NBR 15723-4-2020 Implants for surgery - Polymeric materials Part 4: Requirements for porous polyethylene polymers

PL-PKN

PN C89102-1973 Polymeres Oefinitions of ?erms
PN C89061-1987 Homopolymer and copolymer resins of styrene Determination of residual monomers and compounds don't underego polymerisation by gas chromatographic method

ZA-SANS

SANS 1042:2006 Polymer floor dressings

AT-ON

OENORM EN ISO/ASTM 52936-1:2021 Additive manufacturing of polymers - Powder bed fusion - Part 1: General principles and preparation of test specimens for PBF-LB (ISO/ASTM DIS 52936-1:2021)

RO-ASRO

STAS R 12729-1989 PLASTICS Symbols for synthetic polymers
STAS 11476-1981 UNWOVEN TEXTILE MATERIALS OF COTTON, MIXTURES NATURAL AND SYNTHETIC POLYMERES ND POLYMER MIXTURES inimum colour and printing fastness
SR ISO 305:1995 Plastics - Determination of thermal stability of polyvinyl chloride, related chlorine-containing polymers and copolymers, and their compourids - Discoloration method
STAS 7397-1973 POLYVINYL CHLORIDE TYPE GE

CZ-CSN

CSN 64 9005-1985 Aqueous dispursions of polymers ind copolymers ensile test
CSN 64 9004-1982 Aqueous dispersions of polymers and opolymers etermination of pH
CSN 64 9007-1986 Aqueous dispersions of polymers nd copolymers etermination of foaming
CSN 80 0525-1993 Testing of polymer film tapes
CSN 64 9008-1986 Aqueous dispersions of homopolyntors nd copolymers. Detormination of oagulum and rough admixtures- ontent by sievo analysis

GM Europe

GME QK 000577-1988 Polymer blend from polypropylene and EPDM Polyblend from Polypropylene and EPDM English/German
GME QK 000577-2011 Polymer blends made of polypropylene and EPDM (revision 2; English/German)
GME QK 001226-2002 Blend from Polyamide 66, Polyamide 6 and Polyethylene Blend from Polyamide 66, Polyamide 6 and Polyethylene English/German
GME QK 001807-2003 Blend of propylene-ethylene copolymer and EPDM Blend from Polypropylene-Ethylene-Copolymer and EPDM

Lithuanian Standards Office

LST EN ISO 20795-2:2013 Dentistry - Base polymers - Part 2: Orthodontic base polymers (ISO 20795-2:2013)
LST EN ISO 20795-1:2013 Dentistry - Base polymers - Part 1: Denture base polymers (ISO 20795-1:2013)
LST EN 13632-2010 Bitumen and bituminous binders - Visualisation of polymer dispersion in polymer modified bitumen
LST EN ISO 20795-2:2010 Dentistry - Base polymers - Part 2: Orthodontic base polymers (ISO 20795-2:2010)
LST EN ISO 20795-1:2008 Dentistry - Base polymers - Part 1: Denture base polymers (ISO 20795-1:2008)

The American Road & Transportation Builders Association

AASHTO M245M-2000 Standard Specification for Corrugated Steel Pipe, Polymer Precoated, for Sewers and Drains Twentieth Edition; ASTM A762/A762M-98
AASHTO T 302-2005 Standard Method of Test for Polymer Content of Polymer-Modified Emulsified Asphalt Residue and Asphalt Binders
AASHTO T302-1999 Standard Method of Test for Polymer Content of Polymer-Modified Emulsions Twentieth Edition
AASHTO M246-2000 Standard Specification for Steel Sheet, Metallic-Coated and Polymer Precoated, for Corrugated Steel Pipe Twentieth Edition; ASTM A742/A742M-98

(U.S.) Ford Automotive Standards

FORD M2C183-A-1985 LUBRICANT, MULTI-PURPOSE, POLYMER
FORD M2C183-A-2009 LUBRICANT, MULTIPURPOSE, POLYMER

Institute of Interconnecting and Packaging Electronic Circuits (IPC)

IPC TM-650 2.4.50-1995 Thermal Conductivity, Polymer Films

Canadian Standards Association (CSA)

CSA C310-2021 Distribution class polymeric cutouts

ACI - American Concrete Institute

ACI SP-99-1987 Polymer Modified Concrete
ACI 548.3R-2003 Polymer-Modified Concrete
ACI 548R-1977 Polymers in Concrete

AENOR

UNE-EN 13632:2010 Bitumen and bituminous binders - Visualisation of polymer dispersion in polymer modified bitumen
UNE-EN ISO 20795-2:2013 Dentistry - Base polymers - Part 2: Orthodontic base polymers (ISO 20795-2:2013)
UNE-EN ISO 20795-1:2013 Dentistry - Base polymers - Part 1: Denture base polymers (ISO 20795-1:2013)

Standard Association of Australia （SAA）

AS 4702:2000(R2013) Polymer cable protective sleeve
AS 5204:2023 Fibre-Reinforced Polymer Bars

Society of Automotive Engineers (SAE)

SAE ARP6167-2013 Etching of Fluoropolymer Insulations

CEN - European Committee for Standardization

EN ISO 305:2019 Plastics - Determination of thermal stability of poly(vinyl chloride)@ related chlorine-containing homopolymers and copolymers and their compounds - Discoloration method

TR-TSE

TS 2330-1976 PLASTICS - AQUEOUS DISPERSIONS OF POLYMERS AND COPOLYMERS - DETERMINATION OF WHITE POINT TEMPERATURE