Lightweight Spray Coatings

Lightweight Spray Coatings, Total:199 items.

The international standard classification for "Lightweight Spray Coatings" includes: Cellular materials , Waterproofing , Surface treatment , Surface treatment and coating , Other non-ferrous metals and their alloys , Rubber and plastics .

The Chinese standard classification for "Lightweight Spray Coatings" includes: Synthetic resin and plastic , Roof and pavement waterproof and barrier material , Material Protection , Precious metals and their alloys , Composite materials and solid fuels , Coating .

工业和信息化部

JC/T 2317-2015 Spraying-applied rubber-modified bitumen waterproof coating
YB/T 4672-2018 Light-weight alumina-silicate gunning refractories

Group Standards of the People's Republic of China

T/ZZB 1507-2020 Alumina-silicate gunning refractories for cement klin
T/SGFS 005-2020 Spraying quick-setting rubber asphalt waterproof coating
T/CECS 10084-2020 Water-based spray durable sticky polymer waterproof coating
T/LFS 0002-2017 Sprayed quick setting rubber asphalt waterproof coating
T/QGCML 4462-2024 Light calcium carbonate for coatings

未注明发布机构

CAN/ULC-S712.2:2017 STANDARD FOR THERMAL INSULATION – LIGHT DENSITY, OPEN CELL SPRAY APPLIED SEMI-RIGID POLYURETHANE FOAM – INSTALLATION
CAN/ULC-S712.1:2017 STANDARD FOR THERMAL INSULATION – LIGHT DENSITY, OPEN CELL SPRAY APPLIED SEMI-RIGID POLYURETHANE FOAM – MATERIAL SPECIFICATION
DIN EN ISO 14922:2022 Thermal spraying – quality requirements for manufacturers of thermally sprayed coatings

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 23446-2009 Spray polyurea waterproofing coating
GB/T 20219-2006 Spray-applied rigid polyurethane cellular plastics
GB/T 19352.4-2003 Thermal spraying—Quality requirements of thermally sprayed structures—Part 4:Elementary quality requirements
GB/T 26004-2010 Special conductive coatings on surface spraying
GB 12608-1990 Designation for the materials for thermal spraying coatings
GB/T 19352.2-2003 Thermal spraying—Quality requirements of thermally sprayed structures—Part 2:Comprehensive quality requirements
GB/T 19352.3-2003 Thermal spraying - Quality requirements of thermally sprayed structure - Part 3: STANDARD quality requirements
GB/T 12608-1990 Designation of the materials for thermal spraying coatings
GB/T 20219-2015 Rigid cellular plastics-spray-applied polyurethane foam for thermal insulation

Professional Standard - Aerospace

QJ 1128-1987 Spray Moulding Process of Rigid Polyurethane Foam

Professional Standard - Aviation

HB 7236-1995 Quality Inspection for Thermal Spraying Seal Coating
HB 6738-1993 Quality Inspection for Abrasion Resistant Coating in Thermal Spraying
HB 20035-2011 Quality controls of thermal spray process
HB 7269-1996 Thermal spray thermal barrier coating quality inspection

Liaoning Provincial Standard of the People's Republic of China

DB21/T 2446-2015 Machine-sprayed RQW lightweight composite thermal insulation material external thermal insulation engineering technical regulations

Professional Standard - Chemical Industry

HG/T 3831-2006 Spray polyurea for materials protection

British Standards Institution (BSI)

BS 8216:1991(1999) Code of practice for Use of sprayed lightweight mineral coatings used for thermal insulation and sound absorption in buildings
BS 8216:1991 Code of practice for use of sprayed lightweight mineral coatings used for thermal insulation and sound absorption in buildings
BS EN ISO 14922:2021 Thermal spraying. Quality requirements for manufacturers of thermal sprayed coatings
BS EN ISO 14922-4:1999 Thermal spraying - Quality requirements of thermally sprayed structures - Elementary quality requirements
BS EN ISO 14922-2:1999 Thermal spraying - Quality requirements of thermally sprayed structures - Comprehensive quality requirements
BS EN ISO 14922-3:1999 Thermal spraying - Quality requirements of thermally sprayed structures - Standard quality requirements
BS EN ISO 6246:1998 Petroleum products. Gum content of light and middle distillate fuels. Jet evaporation method
BS EN 13032-2:2004 Light and lighting — Measurement and presentation of photometric data of lamps and luminaires — Part 2: Presentation of data for indoor and outdoor work places
BS EN 12981:2005 Coating plants - Spray booths for application of organic powder coating material - Safety requirements
BS EN 13020:2004 Road surface treatment machines-Safety requirements
BS EN 50176:1997 Automatic electrostatic spraying installations for flammable liquid spraying material
BS EN 17832:2023 Thermal spraying. Determination of the feed rate with spray material in powder form in a production environment
BS EN ISO 14922-1:1999 Thermal spraying - Quality requirements of thermally sprayed structures - Guidance for selection and use
BS EN ISO 12679:2015 Thermal spraying. Recommendations for thermal spraying
BS EN ISO 12679:2015(2018) Thermal spraying - Recommendations for thermal spraying

SCC

CAN/ULC-S712.1-2010 STANDARD FOR THERMAL INSULATION - LIGHT DENSITY, OPEN CELL SPRAY APPLIED SEMI-RIGID POLYURETHANE FOAM - MATERIAL SPECIFICATION
CAN/ULC-S712.1:2021 STANDARD FOR THERMAL INSULATION – LIGHT DENSITY, OPEN CELL SPRAY APPLIED SEMI-RIGID POLYURETHANE FOAM – MATERIAL SPECIFICATION
ULC 712.1-2024 Thermal Insulation - Light Density, Open Cell Spray Applied Semi- Rigid Polyurethane Foam - Material Specification (CAN/ULC-S712.1:2017)
DANSK DS/ISO 14922:2021 Thermal spraying – Quality requirements for manufacturers of thermal sprayed coatings
CAN/ULC-S712.2:2020 STANDARD FOR THERMAL INSULATION – LIGHT DENSITY, OPEN CELL SPRAY APPLIED SEMI-RIGID POLYURETHANE FOAM – INSTALLATION
CAN/CGSB-51.23-1992 Thermal insulation in rigid cellular sprayed polyurethane plastic
MIL MIL-PRF-6799L-2010 Coatings, Sprayable, Strippable, Protective, Water Emulsion
NS-EN ISO 14922:2021 Thermal spraying – Quality requirements for manufacturers of thermal sprayed coatings (ISO 14922:2021)
DANSK DS/EN ISO 14922:2021 Thermal spraying – Quality requirements for manufacturers of thermal sprayed coatings (ISO 14922:2021)
ULC Subject 712.1-2017 STANDARD FOR THERMAL INSULATION - LIGHT DENSITY, OPEN CELL SPRAY APPLIED SEMI-RIGID POLYURETHANE FOAM - MATERIAL SPECIFICATION (Bulletin, 2/3/2017)
DANSK DS/EN ISO 14922-3:1999 Thermal spraying – Quality requirements of thermally sprayed structures – Part 3: Standard quality requirements
DANSK DS/EN ISO 14922-4:1999 Thermal spraying – Quality requirements of thermally sprayed structures – Part 4: Elementary quality requirements
DANSK DS/EN ISO 14922-2:1999 Thermal spraying – Quality requirements of thermally sprayed structures – Part 2: Comprehensive quality requirements
BS PD ISO/TR 14232-2:2017 Thermal spraying. Powders-Comparison of coating performance and spray powder chemistry
NS-EN 13055:2016 Lightweight aggregates
DANSK DS/EN 13055:2016 Lightweight aggregates
ULC 712.2-2020 Standard for Thermal Insulation - Light Density, Open Cell Spray Applied Semi- Rigid Polyurethane Foam - Installation (CAN/ULC-S712.2:2017)
UNE-EN 50348:2003 Automatic electrostatic spraying equipment for non-flammable liquid spraying material
BS EN 1953:1998+A1:2009 Atomizing and spraying equipment for coating materials. Safety requirements
NS-EN 17832:2023 Thermal spraying - Determination of the feed rate with spray material in powder form in a production environment
05/30142992 DC EN 50176. Automatic electrostatic spraying equipment for flammable liquid spraying material
NS-EN 1953:2013 Atomising and spraying equipment for coating materials — Safety requirements
DANSK DS/EN 1953:2013 Atomising and spraying equipment for coating materials - Safety requirements
UNE-EN 1953:1999+A1:2010 Atomising and spraying equipment for coating materials - Safety requirements
NS-EN 1953:1998 Atomising and spraying equipment for coating materials — Safety requirements
BS 3590:1963 Sprayed asbestos insulation
CAN/CGSB-51.39-1992 Spray-Application of Rigid Polyurethane Cellular Plastic Thermal Insulation for Building Construction
AENOR UNE-EN ISO 14922-3:2000 Thermal spraying - Quality requirements of thermally sprayed structures - Part 3: Standard quality requirements (ISO 14922-3:1999)
AENOR UNE-EN ISO 14922-2:2000 Thermal spraying - Quality requirements of thermally sprayed structures - Part 2: Comprehensive quality requirements (ISO 14922-2:1999)
NS-EN ISO 14922-2:1999 Thermal spraying — Quality requirements of thermally sprayed structures — Part 2: Comprehensive quality requirements (ISO 14922-2:1999)
NS-EN ISO 14922-3:1999 Thermal spraying — Quality requirements of thermally sprayed structures — Part 3: Standard quality requirements (ISO 14922-3:1999)
AENOR UNE-EN ISO 14922-4:2000 Thermal spraying - Quality requirements of thermally sprayed structures - Part 4: Elementary quality requirements (ISO 14922-4:1999)
DANSK DS/EN 17832:2023 Thermal spraying – Determination of the feed rate with spray material in powder form in a production environment
NS-EN ISO 14922-4:1999 Thermal spraying — Quality requirements of thermally sprayed structures — Part 4: Elementary quality requirements (ISO 14922-4:1999)
UNE-EN 50176:1997 AUTOMATIC ELECTROSTATIC SPRAYING INSTALLATIONS FOR FLAMMABLE LIQUID SPRAYING MATERIAL.
UNE-EN ISO 6246:1999 PETROLEUM PRODUCTS. GUM CONTENT OF LIGHT AND MIDDLE DISTILLATE FUELS. JET EVAPORATION METHOD (ISO 6246:1995)
MIL MIL-C-44423-1991 CLOTH, COATED, FLAME RESISTANT, LIGHT WEIGHT, REVERSIBLE (S/S BY MIL-PRF-44423A)
BS ISO 12679:2011 Thermal spraying. Recommendations for thermal spraying
HOLDEN HN 2382-2002 Lightweight Acoustic Absorbing Material
HOLDEN HN 2382-2012 Lightweight Acoustic Absorbing Material
UNE-EN 14616:2006 Thermal spraying - Recommendations for thermal spraying
DANSK DS/EN ISO 12679:2015 Thermal spraying - Recommendations for thermal spraying
HOLDEN HN 1081-2012 Spray on Sound Deadener Sandless Type
HOLDEN HN 1081-1982 Spray-On Sound Deadener - Sandless Type
DIN EN 17832 E:2022 Draft Document - Thermal spraying - Determination of the feed rate with spray material in powder form in a production environment; German and English version prEN 17832:2022

Korean Agency for Technology and Standards (KATS)

KS F 3513-1985 Light weight aggregate coating materials
KS F 3513-2013 Light weight aggregate coating materials
KS D ISO 14922-3-2013 Thermal spraying－Quality requirements of thermally sprayed structures－Part 3：Standard quality requirements
KS D ISO 14922-4-2013 Thermal spraying－Quality requirements of thermally sprayed structures－Part 4：Elementary quality requirements
KS D ISO 14922-2-2013 Thermal spraying－Quality requirements of thermally sprayed structures－Part 2：Comprehensive quality requirements
KS D ISO 14922-3:2013 Thermal spraying－Quality requirements of thermally sprayed structures－Part 3：Standard quality requirements
KS D ISO 14922-4:2003 Thermal spraying-Quality requirements of thermally sprayed structures-Part 4:Elementary quality requirements
KS D ISO 14922-3:2003 Thermal spraying-Quality requirements of thermally sprayed structures-Part 3:Standard quality requirements
KS D ISO 14922-4:2013 Thermal spraying－Quality requirements of thermally sprayed structures－Part 4：Elementary quality requirements
KS D ISO 14922-2:2013 Thermal spraying－Quality requirements of thermally sprayed structures－Part 2：Comprehensive quality requirements
KS D ISO 14922-2:2003 Thermal spraying-Quality requirements of thermally sprayed structures-Part 2:Comprehensive quality requirements
KS M ISO 6246:2012 Petroleum products－Gum content of light and middle distillate fuels－Jet evaporation method
KS D ISO 14922-1-2003(2008) Thermal spraying－Quality requirements of thermally sprayed structures－Part 1：Guidance for selection and use

Association Francaise de Normalisation

NF A91-223*NF EN ISO 14922:2021 Thermal spraying - Quality requirements for manufacturers of thermal sprayed coatings
NF EN ISO 14922:2021 Thermal Spray - Quality Requirements for Thermal Spray Coating Manufacturers
NF A91-223-4:1999 Thermal spraying. Quality requirements of thermally sprayed structures. Part 4 : elementary quality requirements.
NF EN 13055:2016 Granulats légers
NF T35-011/IN1:2009 Coating plants - Spray booths for application of organic powder coating material - Safety requirements.
NF A91-223-3:1999 Thermal spraying. Quality requirements of thermally sprayed structures. Part 3 : standard quality requirements.
NF T35-011:2005 Coating plants - Spray booths for application of organic powder coating material - Safety requirements.
NF EN 1953:2013 Atomizing and Spraying Equipment for Coating Products – Safety Requirements
NF EN 50059:2018 Manual electrostatic spraying equipment - Safety requirements - Manual non-flammable coating spraying equipment
NF A91-236*NF EN ISO 12679:2015 Thermal spraying - Recommendations for thermal spraying
NF EN 16985:2018 Spray application booths for organic coating products - Safety requirements
NF C23-559*NF EN 50059:2018 Electrostatic hand-held spraying equipment - Safety requirements - Hand-held spraying equipment for non-ignitable coating materials
NF A91-228:2005 Thermal spraying - Recommendations for thermal spraying.
NF EN ISO 12679:2015 Thermal Spraying - Recommendations for Thermal Spraying
NF L06-351:1995 Aerospace industry. Coatings through thermal spraying. Quality of coatings.

International Organization for Standardization (ISO)

ISO 14922:2021 Thermal spraying — Quality requirements for manufacturers of thermal sprayed coatings
ISO 14922-3:1999 Thermal spraying - Quality requirements of thermally sprayed structures - Part 3: Standard quality requirements
ISO 14922-4:1999 Thermal spraying - Quality requirements of thermally sprayed structures - Part 4: Elementary quality requirements
ISO 14922-2:1999 Thermal spraying - Quality requirements of thermally sprayed structures - Part 2: Comprehensive quality requirements
ISO 16925:2014 Paints and varnishes - Determination of the resistance of coatings to pressure water-jetting
ISO 6246:1995 Petroleum products - Gum content of light and middle distillate fuels - Jet evaporation method

ES-UNE

UNE-EN ISO 14922:2022 Thermal spraying - Quality requirements for manufacturers of thermal sprayed coatings (ISO 14922:2021)
UNE-EN 17832:2023 Thermal spraying - Determination of the feed rate with spray material in powder form in a production environment
UNE-EN ISO 12679:2016 Thermal spraying - Recommendations for thermal spraying (ISO 12679:2011)
UNE-EN 1953:2013 Atomising and spraying equipment for coating materials - Safety requirements (Endorsed by AENOR in October of 2013.)
UNE-EN 17002:2019 Thermal spraying - Components with thermally sprayed coatings - Thermal spray procedure specification

European Committee for Standardization (CEN)

EN ISO 14922:2021 Thermal spraying - Quality requirements for manufacturers of thermal sprayed coatings (ISO 14922:2021)
EN 12981:2005+A1:2009 Coating plants - Spray booths for application of organic powder coating material - Safety requirements
EN 17832:2023 Thermal spraying - Determination of the feed rate with spray material in powder form in a production environment
EN 17002:2018 Thermal spraying - Components with thermally sprayed coatings - Thermal spray procedure specification

General Motors Corporation (GM)

GM 9982223-2001 Transit Coating (Sprayable) Revision B

Danish Standards Foundation

DS/ISO 14922:2021 Thermal spraying – Quality requirements for manufacturers of thermal sprayed coatings
DS/EN ISO 14922:2021 Thermal spraying – Quality requirements for manufacturers of thermal sprayed coatings (ISO 14922:2021)
DS/EN ISO 14922-3:1999 Thermal spraying - Quality requirements of thermally sprayed structures - Part 3: Standard quality requirements
DS/EN ISO 14922-4:1999 Thermal spraying - Quality requirements of thermally sprayed structures - Part 4: Elementary quality requirements
DS/EN ISO 14922-2:1999 Thermal spraying - Quality requirements of thermally sprayed structures - Part 2: Comprehensive quality requirements
DS/EN 14616:2005 Thermal spraying - Recommendations for thermal spraying
DS/EN 1953:2013 Atomising and spraying equipment for coating materials - Safety requirements

Japanese Industrial Standards Committee (JISC)

JIS A 6917:1983 Lightweight aggregate coating materials
JIS Z 1708:1976 Sprayable and strippable protective plastic coatings

German Institute for Standardization

DIN EN ISO 14922:2022-02 Thermal spraying - Quality requirements for manufacturers of thermal sprayed coatings (ISO 14922:2021); German version EN ISO 14922:2021
DIN EN ISO 14922:2020 Thermal spraying - Quality requirements for manufacturers of thermal sprayed coatings - Quality assurance system (ISO/DIS 14922:2020); German and English version prEN ISO 14922:2020
DIN EN 13055:2021-06 Lightweight aggregates; German and English version prEN 13055:2021 / Note: Date of issue 2021-05-14*Intended as replacement for DIN EN 13055 (2016-11).
DIN EN 13055:2016-11 Lightweight aggregates; German version EN 13055:2016 / Note: To be replaced by DIN EN 13055 (2021-06).
DIN EN 17832:2023-08 Thermal spraying - Determination of the feed rate with spray material in powder form in a production environment; German version EN 17832:2023
DIN EN 17832:2023 Thermal spraying - Determination of the feed rate with spray material in powder form in a production environment
DIN EN 1953:2013-12 Atomising and spraying equipment for coating materials - Safety requirements; German version EN 1953:2013 / Note: To be replaced by DIN EN 1953 (2020-07), DIN EN 1953 (2021-12).
DIN EN ISO 12679:2015-12 Thermal spraying - Recommendations for thermal spraying (ISO 12679:2011); German version EN ISO 12679:2015

GSO

GSO ISO 12670:2015 Thermal spraying -- Components with thermally sprayed coatings -- Technical supply conditions
GSO ISO 14922-3:2013 Thermal spraying -- Quality requirements of thermally sprayed structures -- Part 3: Standard quality requirements
GSO ISO 14922-2:2013 Thermal spraying -- Quality requirements of thermally sprayed structures -- Part 2: Comprehensive quality requirements
BH GSO ISO 14922-3:2016 Thermal spraying -- Quality requirements of thermally sprayed structures -- Part 3: Standard quality requirements
GSO ISO 14922-4:2013 Thermal spraying -- Quality requirements of thermally sprayed structures -- Part 4: Elementary quality requirements
OS GSO ISO 14922-2:2013 Thermal spraying -- Quality requirements of thermally sprayed structures -- Part 2: Comprehensive quality requirements
OS GSO ISO 14922-3:2013 Thermal spraying -- Quality requirements of thermally sprayed structures -- Part 3: Standard quality requirements
BH GSO ISO 14922-2:2016 Thermal spraying -- Quality requirements of thermally sprayed structures -- Part 2: Comprehensive quality requirements
OS GSO EN 1953:2011 Atomising and spraying equipment for coating materials - Safety requirements
GSO ISO 12679:2015 Thermal spraying -- Recommendations for thermal spraying

U.S. Military Regulations and Norms

ARMY MIL-HDBK-1884 VALID NOTICE 1-2008 Coating, Plasma Spray Deposition
ARMY MIL-STD-3021 CHG 1-2011 MATERIALS DEPOSITION, COLD SPRAY

(U.S.) Ford Automotive Standards

FORD M99B14-A-1985 STRIPPABLE COATING FOR SPRAY BOOTHS
FORD M99B153-A-1980 SPRAY BOOTH COATING - WATER BASE - TACKY - CLEAR

PL-PKN

PN M47185 ArkusZ1-1972 Painting aggregats lassification

CZ-CSN

CSN 67 4700-1959 Nitrocellulose coating. spray

American Society for Testing and Materials (ASTM)

ASTM C114-09b Standard Test Methods for Chemical Analysis of Hydraulic Cement
ASTM C1149-97 Standard Specification for Self-Supported Spray Applied Cellulosic Thermal Insulation
ASTM C114-09a Standard Test Methods for Chemical Analysis of Hydraulic Cement
ASTM C114-11a Standard Test Methods for Chemical Analysis of Hydraulic Cement
ASTM C1149-02 Standard Specification for Self-Supported Spray Applied Cellulosic Thermal Insulation
ASTM C1029-07 Standard Specification for Spray-Applied Rigid Cellular Polyurethane Thermal Insulation
ASTM C1149-17 Standard Specification for Self-Supported Spray Applied Cellulosic Thermal Insulation
ASTM C1149-08 Standard Specification for Self-Supported Spray Applied Cellulosic Thermal Insulation
ASTM C1149-06 Standard Specification for Self-Supported Spray Applied Cellulosic Thermal Insulation
ASTM C1149-06e1 Standard Specification for Self-Supported Spray Applied Cellulosic Thermal Insulation

GM North America

GM 9982223-2015 Transit Coating (Sprayable) (Issue 5)

Association of German Mechanical Engineers

DVS 2312-2005 Plastic Thermal Spray Guide
DVS 2312-1994 Plastic Thermal Spray Guide
DVS 2312-2011 Plastic Thermal Spray Guide
DVS 2304-2011 Thermal Spray Quality Assurance Checklist
DVS 2304-2005 Thermal Spray Quality Assurance Checklist

DIN

DIN EN 50176:1997 Automatic electrostatic spraying installations for flammable liquid spraying material; German version EN 50176:1996
DIN EN 50348:2002 Automatic electrostatic spraying equipment for non-flammable liquid spraying material; German version EN 50348:2001
DIN EN 12981:2005 Coating plants - Spray booths for application of organic powder coating material - Safety requirements

Canadian General Standards Board （CGSB)

CGSB 1-GP-71 METH 100.2-1982 Methodes D'Essai Des Peintures Et Pigments Preparation Des Plaques En Acier Decapage Au Jet De Sable Ou De Grenaille

National Fire Protection Association (NFPA)

NFPA FPH SECTION 6-16-2003 Spray Finishing and Powder Coating

Lithuanian Standards Office

LST EN ISO 14922-4:2001 Thermal spraying - Quality requirements of thermally sprayed structures - Part 4: Elementary quality requirements (ISO 14922-4:1999)
LST EN ISO 14922-3:2001 Thermal spraying - Quality requirements of thermally sprayed structures - Part 3: Standard quality requirements (ISO 14922-3:1999)
LST EN ISO 14922-2:2001 Thermal spraying - Quality requirements of thermally sprayed structures - Part 2: Comprehensive quality requirements (ISO 14922-2:1999)
LST EN ISO 6246:1999 Petroleum products - Gum content of light and middle distillate fuels - Jet evaporation method (ISO 6246:1995)
LST EN 14616-2005 Thermal spraying - Recommendations for thermal spraying
LST EN 1953-2001+A1-2010 Atomising and spraying equipment for coating materials - Safety requirements

AENOR

UNE-EN ISO 14922-4:2000 THERMAL SPRAYING. QUALITY REQUIREMENTS OF THERMALLY SPRAYED STRUCTURES. PART 4: ELEMENTARY QUALITY REQUIREMENTS (ISO 14922-4:1999)
UNE-EN ISO 14922-2:2000 THERMAL SPRAYING. QUALITY REQUIREMENTS OF THERMALLY SPRAYED STRUCTURES. PART 2: COMPREHENSIVE QUALITY REQUIREMENTS (ISO 14922-2:1999)
UNE-EN ISO 14922-3:2000 THERMAL SPRAYING. QUALITY REQUIREMENTS OF THERMALLY SPRAYED STRUCTURES. PART 3: STANDARD QUALITY REQUIREMENTS (ISO 14922-3:1999)

SAE - SAE International

SAE AMS2447B-1998 Coating@ Thermal Spray High Velocity Oxygen/Fuel Process
SAE AMS2447-1998 Coating@ Thermal Spray High Velocity Oxygen/Fuel Process
SAE AMS2447A-1998 Coating@ Thermal Spray High Velocity Oxygen/Fuel Process

United States Navy

NAVY QPL-6799-QPD-2010 Coatings, Sprayable, Stripple, Protective Water Emulsion

CEN - European Committee for Standardization

EN 14616:2004 Thermal spraying - Recommendations for thermal spraying

International Federation of Trucks and Engines

NAVISTAR TMS 7087-1987 VOID - Vinyl Coated Fabric, Lightweight Door Trim

Others: Lightweight Spray Coatings