bender method

bender method, Total:178 items.

The international standard classification for "bender method" includes: Wires , Semiconducting materials , Mechanical testing of metals , Welded joints , Plastics in general , Other methods of testing of metals , Connecting devices , Raw materials and raw glass , Testing of metals .

The Chinese standard classification for "bender method" includes: Bare wire , Semimetal and semiconductor material in general , Metal processing property test method , Metal physical property test method , Building sanitary ceramics , Welding and cutting , Basic standards and general methods for synthetic resin and plastic , Metal mechanical property test method , Ceramic and glass in general .

工业和信息化部

QB/T 5559-2020 Bending resistance tester with constant rate of deflection

Group Standards of the People's Republic of China

T/SSEA 0069-2020 Measuring method of bending degree of bar
T/CSTM 00587-2023 Test method for flexural strength of crystalline silicon cells—Four-point flexural
T/CPMA 006-2019 Identification of Campylobacter jejuni and Campylobacter coli
T/CSEB 0002-2018 Testing method for determining dynamic bending strength of rock materials by the Semi-circular Bending specimen

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 12347-1996 Steel wire rope-Bending fatigue testing
GB/T 4909.6-1985 Test methods for bare wires--Bend test--Single bend test
GB/T 8364-2003 Test method for specific thermal deflection of thermostat metals
GB/T 4909.6-2009 Test methods for bare wires - Part 6: Bend test - Single bend test
GB/T 244-2008 Metallic materials - Tube - Bend test
GB/T 232-2024 Metallic materials—Bend testing method
GB/T 244-1997 Metallic materials--Tube--Bend test
GB/T 6619-2009 Test methods for bow of silicon wafers
GB/T 232-1999 Metallic Materials - Bend Test
GB/T 9341-2000 Plastics--Determination of flexural properties
GB/T 2833-1996 Test method for cross-bending strength of vitrified pipe
GB/T 4909.5-2009 Test methods for bare wires - Part 5: Bend test - Reverse bend test
GB/T 8364-2008 Test methods of thermal flexure of thermostat metals
GB/T 6619-1995 Test methods for bow of silicon slices
GB/T 232-2010 Metallic materials—Bend test
GB/T 12347-2008 Steel wire ropes - Bending fatigue testing
GB/T 2653-2008 Bend test methods on welded joints
GB/T 4909.5-1985 Test methods for bare wires--Bend test--Reverse bend test

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 34171-2017 Test method for flexural property of thin and ultrathin glass--Three-point bending method

工业和信息化部/国家能源局

JB/T 13554-2018 Internal combustion engine bending fatigue test methods for crankshaft

Professional Standard - Ferrous Metallurgy

YB/T 5126-2003 Steel bars for reinforcement of concrete—Bend and rebend tests
YB/T 5126-1993 Steel reinforcement bar-Plane rebend test method

Professional Standard - Aviation

HB 5184-1981 Metallic Materials-Tube - Bend Test

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 244-2020 Metallic material—Tube—Bend test method

SCC

NS-EN ISO 32100:2010 Rubber- or plastics-coated fabrics — Physical and mechanical tests — Determination of flex resistance by the flexometer method (ISO 32100:2010)
AASHTO T 313-2009 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
AASHTO T 313-2006 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
AASHTO T 313-2012(2016) Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
AASHTO TP 125-2022(2023) Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Mixtures Using the Bending Beam Rheometer (BBR)
AASHTO TP 125-2016(2020) Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Mixtures Using the Bending Beam Rheometer (BBR)
BS 1639:1964 Methods for bend testing of metals
NZS 1011:1964 Methods for bend testing of metals
NS 3277:1987 Particle boards — Test methods — Modulus of elasticity in bending and bending strength
NS 3252:1975 Test methods for rigid flat sheets — Modulus of elasticity in bending and bending strength
AASHTO TP 87-2010(2016) Standard Method of Test for Measuring Low-Temperature Flexural Creep Stiffness of Bituminous Sealants and Fillers by Bending Beam Rheometer (BBR)
AASHTO T 368-2017(2021) Standard Method of Test for Measuring Low-Temperature Flexural Creep Stiffness of Hot-Poured Asphalt Crack Sealant by Bending Beam Rheometer (BBR)
AASHTO T 368-2022 Standard Method of Test for Measuring Low-Temperature Flexural Creep Stiffness of Hot-Poured Asphalt Crack Sealant by Bending Beam Rheometer (BBR)
BS 3900-E1:1966 Methods of test for paints. Bend test
DANSK DS/EN ISO 5402-1:2017 Leather – Determination of flex resistance – Part 1: Flexometer method (ISO 5402-1:2017)
BS EN 14771:2005 Bitumen and bituminous binders. Determination of the flexural creep stiffness. Bending Beam Rheometer (BBR)
NS-EN 14771:2005 Bitumen and bituminous binders — Determination of the flexural creep stiffness — Bending Beam Rheometer (BBR)
NS-EN 14771:2012 Bitumen and bituminous binders - Determination of the flexural creep stiffness - Bending Beam Rheometer (BBR)
NS-EN 14771:2023 Bitumen and bituminous binders - Determination of the flexural creep stiffness - Bending Beam Rheometer (BBR)
DANSK DS/EN 14771:2012 Bitumen and bituminous binders – Determination of the flexural creep stiffness – Bending Beam Rheometer (BBR)
CSA S442.1-M1985-1985 Method of In-Grade Bending Tests of Lumber
ASD-STAN prEN 6061:1970 Fibre reinforced plastics - Test method - Determination of sandwich flexural strength 4 point bending

Korean Agency for Technology and Standards (KATS)

KS K 0539-2010 Determination of flexural stiffness of fabrics：Flexometer method
KS F 2390-2014 Standard test method for flexural creep stiffness of asphalt binder using bending beam rheometer
KS F 2390-2019 Standard test method for flexural creep stiffness of asphalt binder using bending beam rheometer
KS M 6695-2021 Testing method of crack growth using Demattia flex-cracking apparatus
KS M 3036-2021 Testing method of flexural fatigue of rigid plastics by plane bending
KS M 3036-2016 Testing method of flexural fatigue of rigid plastics by plane bending
KS B 0861-1985 METHOD OF BEND TEST FOR BEAD WELDING
KS B 0861-2001 METHOD OF BEND TEST FOR BEAD WELDING
KS F 2208-2020 Method of bending test for wood
KS F 2208-1994 Method of Bending Test for Wood
KS F 2208-1999 Method of bending test for wood
KS M 3036-2016(2021) Testing method of flexural fatigue of rigid plastics by plane bending
KS F 2263-2021 Method of bending test for building boards
KS B 0861-1971(1995) METHOD OF BEND TEST FOR BEAD WELDING
KS F 2263-1985 Method of bending test for building boards
KS F 2208-2004 Method of bending test for wood
KS L ISO 4604-2023 Textile glass-Woven fabrics-Determination of conventional flexural stiffness-Fixed-angle flexometer
KS F 2211-1994 Method of Impact Bending Test for Wood
KS M 5505-1983 Test methods for flexural stiffness of paint
KS F 2211-1999 Method of Impact Bending Test for Wood
KS F 2211-2020 Method of impact bending test for wood
KS B 0527-1994 Method of soundness test for fillet welds
KS B 0862-1985 METHOD OF NOTCHED BEND TEST FOR BEAD WELDING
KS B 0866-1971(1995) METHOD OF NOTCHED BEND TEST FOR BEAD WELDING
KS M 6893-2002 Testing method for flexing endurance of light leathers and their surface finishes
KS F 2263-2005(2015) Method of bending test for boards of buildings
KS B 0844-1985 Method of bend test for T type fillet welded joint
KS B 0862-1971(1995) METHOD OF NOTCHED BEND TEST FOR BEAD WELDING
KS F 2263-2005 Method of bending test for boards of buildings
KS M 3044-1988(1998) TESTING METHOD FOR FLEXURAL CREEP OF PLASTICS
KS F 2395-2004 Standard testing method for bending strength of asphalt mixtures
KS B 0844-2013 Method of bend test for T type fillet welded joint
KS B 0529-1994 Method of bend test for stud welds
KS M 6893-1987 Testing method for flexing endurance of light leathers and their surface finishes
KS M 6893-1982 Testing method for flexing endurance of light leathers and their surface finishes
KS F 2211-2004 Method of impact bending test for wood

KR-KS

KS M 6721-2018(2023) Testing method of cut growth using ross flexing apparatus
KS B 0527-2019(2024) Method of bending test for fillet welds
KS B 0529-2019(2024) Method of bend test for stud welds

AASHTO - American Association of State Highway and Transportation Officials

T 313-2008 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
T 313-2004 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
T 313-2003 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
T 313-2009 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
T 313-2005 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
TP1-1997 Standard Test Method for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
T 313-2006 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
TP 125-2016 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Mixtures Using the Bending Beam Rheometer (BBR)
TP1-1998 Standard Test Method for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
T 313-2012 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
T 313-2010 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
TP1-1993 Standard Test Method for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR) (Edition 1B)
T 368-2017 Standard Method of Test for Measuring Low-Temperature Flexural Creep Stiffness of Hot-Poured Asphalt Crack Sealant by Bending Beam Rheometer (BBR)
TP 87-2010 Standard Method of Test for Measuring Low-Temperature Flexural Creep Stiffness of Bituminous Sealants and Fillers by Bending Beam Rheometer (BBR)

The American Road & Transportation Builders Association

AASHTO T 313-2010 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
AASHTO T 313-2022 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
AASHTO T 313-2019 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
AASHTO TP 125-2016(R2020) Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Mixtures Using the Bending Beam Rheometer (BBR)
AASHTO TP 87-2010 Standard Method of Test for Measuring Low-Temperature Flexural Creep Stiffness of Bituminous Sealants and Fillers by Bending Beam Rheometer (BBR)
AASHTO TP 87-2010(R2016) Standard Method of Test for Measuring Low-Temperature Flexural Creep Stiffness of Bituminous Sealants and Fillers by Bending Beam Rheometer (BBR)
AASHTO T 368-2017 Standard Method of Test for Measuring Low-Temperature Flexural Creep Stiffness of Hot- Poured Asphalt Crack Sealant by Bending Beam Rheometer (BBR)

British Standards Institution (BSI)

BS 3356:1990(1999) Method for Determination of bending length and flexural rigidity of fabrics
BS 1639:1964(1999) Methods for Bend testing ofmetals
BS EN 14617-2:2016 Agglomerated stone. Test methods. Determination of flexural strength (bending)
BS EN 13523-7:2001 Coil coated metals - Test methods - Resistance to cracking on bending (T-bend test)
BS EN 13523-7:2014 Coil coated metals. Test methods. Resistance to cracking on bending (T-bend test)
BS EN 13523-7:2021 Coil coated metals. Test methods. Resistance to cracking on bending (T-bend test)
BS EN 14771:2023 Bitumen and bituminous binders. Determination of the flexural creep stiffness. Bending Beam Rheometer (BBR)
BS 3356:1990 Method for determination of bending length and flexural rigidity of fabrics

Standard Association of Australia （SAA）

AS A106:1971 Method for the determination of the flexural strength of concrete flexure test specimens
AS A106:1957 Australian standard method for the determination of the flexural strength of flexure test specimens
AS 2205.3.3:1988 Methods of destructive testing of welds in metal, Method 3.3: Bend tests - Longitudinal guided bend test
AS 2205.3.2:1988 Methods of destructive testing of welds in metal, Method 3.2: Bend tests - Transverse free bend test
AS 2205.3.1:1988 Methods of destructive testing of welds in metal, Method 3.1: Bend tests - Transverse guided bend test
AS 2132:1978 Methods for the determination of the flexural properties of plastics

HU-MSZT

MSZ 11686-1968 Manual material inspection. Obvious bends, bend detection and instrumentation
MNOSZ 4992-1951 Test table. Testable bending instruments

RU-GOST R

GOST 3728-1978 Tubes. Method of bend-over test
GOST 15634.3-1970 Magnet wire. Method of the bending test
GOST 24167-1980 Brazing and soldering joint. Bend testing method
GOST 4648-2014 Plastics. Method of static bending test
PNST 79-2016 Automobile roads of general use. Viscous petroleum road bitumens. The method determining of the flexural creep stiffness using the bending beam rheometer (BBR)

Australian/New Zealand Standard (AU-AS/NZS)

AS/NZS 4266.5:2004/AMD 1:2006 Reconstituted wood-based panels - Methods of test Method 5: Modulus of elasticity in bending and bending strength
AS/NZS 4266.5:2004(R2006) Reconstituted wood-based panels - Methods of test Method 5: Modulus of elasticity in bending and bending strength
AS/NZS 4266.5(Int):2001 Reconstituted wood-based panels - Methods of test - Modulus of elasticity in bending and bending strength

Danish Standards Foundation

DS/EN 14617-2:2009 Agglomerated stone - Test methods - Part 2: Determination of flexural strength (bending)
DS 1103.2:1976 Test methods for rigid flat sheets. Modulus of elasticity in bending and bending strength
DS/EN 14771:2012 Bitumen and bituminous binders - Determination of the flexural creep stiffness - Bending Beam Rheometer (BBR)

German Institute for Standardization

DIN EN 14617-2:2016 Agglomerated stone - Test methods - Part 2: Determination of flexural strength (bending)
DIN EN 14771:2012-08 Bitumen and bituminous binders - Determination of the flexural creep stiffness - Bending Beam Rheometer (BBR); German version EN 14771:2012 / Note: To be replaced by DIN EN 14771 (2022-03).
DIN EN 14771:2022-03 Bitumen and bituminous binders - Determination of the flexural creep stiffness - Bending Beam Rheometer (BBR); German and English version prEN 14771:2022 / Note: Date of issue 2022-02-18*Intended as replacement for DIN EN 14771 (2012-08).
DIN EN 14771:2022 Bitumen and bituminous binders - Determination of the flexural creep stiffness - Bending Beam Rheometer (BBR); German and English version prEN 14771:2022
DIN EN 14771:2023 Bitumen and bituminous binders - Determination of the flexural creep stiffness - Bending Beam Rheometer (BBR)

Lithuanian Standards Office

LST EN 14617-2-2008 Agglomerated stone - Test methods - Part 2: Determination of flexural strength (bending)
LST EN 14771-2012 Bitumen and bituminous binders - Determination of the flexural creep stiffness - Bending Beam Rheometer (BBR)

GSO

BH GSO ISO 32100:2016 Rubber- or plastics-coated fabrics -- Physical and mechanical tests -- Determination of flex resistance by the flexometer method
OS GSO ISO 32100:2013 Rubber- or plastics-coated fabrics -- Physical and mechanical tests -- Determination of flex resistance by the flexometer method
GSO ISO 21914:2022 Test methods for fibre-reinforced cementitious composites — Bending moment — Curvature curve by four-point bending test
BH GSO ISO 21914:2023 Test methods for fibre-reinforced cementitious composites — Bending moment — Curvature curve by four-point bending test
GSO ISO 17707:2013 Footwear -- Test methods for outsoles -- Flex resistance

GOST

GOST 1579-1980 Wire. Bend test method

Japanese Industrial Standards Committee (JISC)

JIS Z 2113:1977 Method of bending test for wood
JIS Z 2248:1996 Method of bend test for metallic materials
JIS K 7116:1987 Testing method for flexural creep of plastics
JIS Z 3122:2013 Methods of bend test for butt welded joint
JIS Z 3134:1965 Method of bend test for T type fillet welded joint
JIS Z 3145:1981 Method of bend test for stud welds

Institute of Interconnecting and Packaging Electronic Circuits (IPC)

IPC TM-650 5.5.2.6-1998 Test Method 2.4.3 Flexural Endurance

American Society for Testing and Materials (ASTM)

ASTM D5023-07 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM D5023-23 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM F269-60(1996)e1 Standard Test Method for Sag of Tungsten Wire
ASTM D5023-01 Standard Test Method for Measuring the Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM F534-02 Standard Test Method for Bow of Silicon Wafers

Association Francaise de Normalisation

NF B10-602-2*NF EN 14617-2:2016 Agglomerated stone - Test methods - Part 2 : determination of flexural strength (bending)
NF EN 13523-7:2021 Pre-painted sheets - Test methods - Part 7: resistance to bending cracking (T-bend test)

Indonesia Standards

SNI 07-0410-1989 Compressed bending test method of metals
SNI 07-0259-1989 Bending experimental test method of metals
SNI 07-4076-1996 Method of free bend test for butt welded joint
SNI 03-3975-1995 Test method of bending strength of structural size construction woods

International Organization for Standardization (ISO)

ISO 21914:2019 Test methods for fibre-reinforced cementitious composites — Bending moment — Curvature curve by four-point bending test

DIN

DIN EN 14771:2005 Bitumen and bituminous binders - Determination of the flexural creep stiffness - Bending Beam Rheometer (BBR)

Spanish Association for Standardization (UNE)

UNE-EN 14771:2005 Bitumen and bituminous binders - Determination of the flexural creep stiffness - Bending Beam Rheometer (BBR)
UNE-EN 14771:2012 Bitumen and bituminous binders - Determination of the flexural creep stiffness - Bending Beam Rheometer (BBR)
UNE-EN 14771:2024 Bitumen and bituminous binders - Determination of the flexural creep stiffness - Bending Beam Rheometer (BBR)

ESDU - Engineering Sciences Data Unit

ESDU 71004 B-1980 Flange efficiency factors for curved beams under bending in the plane of curvature.

PL-PKN

PN C04243-1972 Plastics Determination of flexural streng?hby Dynstat apparatus

American National Standards Institute （ANSI)

ANSI/ASTM E290:1997 Test Methods for Bend Testing of Materials for Ductility

European Committee for Standardization (CEN)

EN 14771:2023 Bitumen and bituminous binders - Determination of the flexural creep stiffness - Bending Beam Rheometer (BBR)