Colloidal metastable system

Colloidal metastable system, Total:211 items.

The international standard classification for "Colloidal metastable system" includes: Plastics in general , Electronic components in general , Particle size analysis. sieving , Insulating gases , Rubber , Electrical and electronic testing , Paints and varnishes .

The Chinese standard classification for "Colloidal metastable system" includes: Basic standards and general methods for synthetic resin and plastic , Special electronic technology material , Sieving, Sieve Plate and Sieve Screen , Basic standards and general methods for adhesives , Electrical insulating material and its products , Chemical equipment , Editing and Publication , Synthetic rubber , Basic standard and general method for coating .

Group Standards of the People's Republic of China

T/CSTM 00164-2020 Life prediction of rubber sealing rings in liquid medium
T/QGCML 4685-2024 Hydrogen preparation storage pressure stabilizing tank
T/ZZB 1227-2019 liquid adhesive

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB 7265.1-87 Test method for complex permittivity of solid dielectric materials at microwave frequencies--Perturbation method
GB/T 22376.2-2008 Adhesives - Methods of preparing bulk specimens - Part 2: Elevated-temperature-curing one-part systems
GB/T 41316-2022 Guidelines for the characterization of dispersion stability
GB/T 7265.1-1987 Test method for complex permittivity of solid dielectric materials at microwave frequencies; Perturbation method
GB 7265.2-1987 Test method for the complex permittivity of solid dielectric materials at microwave frequencies;
GB/T 7265.2-1987 Test method for the complex permittivity of solid dielectric materials at microwave frequencies--
GB/T22376.2-2008 Adhesives-Methods of preparing bulk specimens-Part 2: Elevatde-temperature-curing one-part systems
GB 9274-1988 Paints and varnishes; Determination of resistance to liquids
GB/T 41931-2022 Plastics/rubber—Polymer dispersions and synthetic rubber latices—Freeze-thaw cycle stability test
GB/T 40125-2021 Liquid silicone rubber - Mold making
GB/T 22376.2-2008 Adhesives - Methods of preparing bulk specimens - Part 2: Elevated-temperature-curing one-part systems
GB/T 16822-1997 Test method for dielectric properties of dielectric crystal
GB/T 9274-1988 Paints and varnishes--Determination of resistance to liquids
GB/T 5654-1985 Measurement of relative permittivity,dielectric dissipation factor at power frequency and volume resistivity of insulating liquids
GB/T 30040.3-2013 Leak Detection Systems - Part 3: Liquid Systems for Tanks
GB 7265.1-1987 Test Method for Microwave Complex Permittivity of Solid Dielectric Perturbation Method
GB/T 32671.2-2019 Colloidal systems—Methods for zeta-potential determination—Part 2:Optical methods
GB/T 5597-1999 Test method for complex permittivity of solid dielectric materials at microwave frequencies
GB/T 22376.1-2008 Adhesives - Methods of preparing bulk specimens - Part 1: Two-pawrt systems

SCC

NAPM IT9.1-1996 IMAGING MEDIA (FILM) - SILVER-GELATIN TYPE - SPECIFICATIONS FOR STABILITY

Spanish Association for Standardization (UNE)

UNE-ISO 35:2012 Elastomers. Natural rubber latex. Determination of mechanical stability
UNE 31 013 Stability test of colloidal gunpowder, by observing cold acidity
UNE 31013:1954 STABILITY TEST OF COLLOIDAL POWDERS, BY OBSERVATION OF THE ACIDITY IN COLD.
AENOR UNE 53084:1956 PLASTIC MATERIALS. DIELECTRIC RIGIDITY IN LIQUID INSULATORS
UNE 31 009 Stability test of nitrocellulose or colloidal gunpowder when the temperature is higher than 100℃
UNE 31012:1954 STABILITY TEST OF NITROCELULOSES OR OF COLLOIDAL POWDERS TO HIGH TEMPERATURE, BY OBSERVATION WITH TEST PAPER TO VOILET METHYL.
AENOR UNE 51074:1964 STABILITY TO LIGHT AND OXIDATION OF COMPASS LIQUIDS
UNE 32 009 Apparatus for testing the stability of nitrocellulose or colloidal powder when the temperature is higher than 100°C
UNE 21320-23:1978 SAMPLING METHOD OF LIQUID DIELECTRICS
UNE-EN 13640:2002 Stability testing of in vitro diagnostic reagents.
UNE 55-833-1986 Sampling methods for chemical products of detergent formulation raw materials and solid particulate (volume size between powder and sol) products
UNE 53531:2000 Latex, rubber. Determination of total solids content.
UNE 31 010 Stability test of nitrocellulose or colloidal gunpowder at high temperature, by observing red vapor
UNE 31009:1954 EUIPMENT FOR STABILITY TEST OF NITROCELULOSES OF COLLOIDAL POWDERS, TO A HIGHER TEMPERATURE THAN 100 DEGREES CENTIGRADES.
UNE-ISO 124:2011 Latex, rubber -- Determination of total solids content
UNE 53530:1990 ELASTOMERS. RUBBER LATEX. SAMPLING.

American National Standards Institute （ANSI)

ANSI IT9.1-1992 Imaging Media (Film) - Silver-Gelatin Type - Specifications for Stability

ANSI - American National Standards Institute

IT9.5-1988 IMAGING MEDIA (FILM) - AMMONIA-PROCESSED DIAZO FILMS - SPECIFICATIONS FOR STABILITY (IS&T)
IT9.1-1988 IMAGING MEDIA (FILM) - SILVER-GELATIN TYPE - SPECIFICATIONS FOR STABILITY (IS&T)
IT9.1-1989 IMAGING MEDIA (FILM) - SILVER-GELATIN TYPE - SPECIFICATIONS FOR STABILITY (IS&T)
IT9.5-1992 IMAGING MEDIA (FILM) - AMMONIA-PROCESSED DIAZO FILMS - SPECIFICATIONS FOR STABILITY (IS&T)
IT9.19-1994 Imaging Media (Film) - Thermally Processed Silver Microfilm - Specifications for Stability (IS&T)
IT9.13-1992 IMAGING MEDIA - PHOTOGRAPHIC Films@ PAPERS@ AND PLATES - GLOSSARY OF TERMS PERTAINING TO STABILITY (IS&T)

Gosstandart of Russia

GOST 7934.4-1974 Watch greases. Method for the determination of colloid stability
GOST 18986.17-1973 Reference diodes. Method of measuring of temperature coefficient of working voltage
GOST 6433.5-1984 Liqyid dielectrics. Sampling
GOST R 70897-2023 Gas-discharge devices. Stabilizing tubes. Parameters system
GOST 8.583-2003 State system for ensuring the uniformity of measurements. State verification schedule for measuring instruments of the refractive index of solid, liquid and gaseous medium
GOST 8.403-1980 State system for ensuring the uniformity of measurements. State special standard and state verification schedule for means measuring of relative dielectric constant of solid and liquids at frequencies from 1·10 up to 1·10 in 7 degree Hz
GOST R ISO 23640-2015 In vitro medical devices. Evaluation of stability of in vitro diagnostic reagents
GOST 18986.15-1975 Reference diodes. Method of measuring stabilization voltage
GOST 8.578-2002 State system for ensuring the uniformity of measurements. State verification schedule for instruments measuring the content of components in gaseous media
GOST R 8.676-2009 State system for ensuring the uniformity of measurements. State verification scheme for instruments measuring ethanol content in gaseous and liquid media
GOST 8.578-2008 State system for ensuring the uniformity of measurements. State verification scheme for measuring instruments of the content of components in gaseous media
GOST R 8.774-2011 State system for ensuring the uniformity of measurements. Disperse composition of liquid media. Determination of particle size by dynamic light scattering

International Organization for Standardization (ISO)

ISO/DIS 13099-2:2024 Colloidal systems
ISO 1147:1995 Plastics/rubber - Polymer dispersions and synthetic rubber latices - Freeze-thaw cycle stability test
ISO 787-21:1979 General methods of test for pigments and extenders; part 21: comparison of heat stability of pigments using a stoving medium
ISO 13099-3:2014 Colloidal systems - Methods for zeta potential determination - Part 3: Acoustic methods
ISO 23640:2011 In vitro diagnostic medical devices - Evaluation of stability of in vitro diagnostic reagents
ISO/TR 12245:1994 Carbon blacks used in rubber products - Classification system
ISO 124:1974 Rubber latices — Determination of total solids content
ISO 124:1985 Rubber latices — Determination of total solids content
ISO 124:1992 Rubber latices — Determination of total solids content
ISO 7269:1987 Rubber; Determination of free sulfur

CEN - European Committee for Standardization

EN ISO 21809-3:2016 Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 3: Field joint coatings
EN ISO 787-21:2017 General methods of test for pigments and extenders - Part 21: Comparison of heat stability of pigments using a stoving medium

Ente Nazionale Italiano di Unificazione

UNI 4902:1962 Elastomers: raw materials. Natural latex. Determination of mechanical stability.
UNI EN 17326:2020 Surfaces for sports areas - Determination of dimensional stability of shock pads used within sports systems
UNI CEN/TS 17731:2022 Growing media - Determination of specific parameters
UNI EN 13640:2002 Stability testing of in vitro diagnostic reagents
UNI 8779:1985 Elastomers. Raw materials and compounding ingredients. Synthetic rubber latex. Determination of high- speed mechanical stability.
UNI ISO 124:2014 Latex, rubber - Determination of total solids content
UNI EN ISO 23640:2015 In vitro diagnostic medical devices - Evaluation of stability of in vitro diagnostic reagents
UNI ISO 124:2012 Latex, rubber - Determination of total solids content
UNI 5608:1965 Elastomers: tests of vulcanized rubber and rubber-like materials. Volume resistivity of electrically conductive and antistatic rubber.
UNI 8314:1981 Elastomers. Tests on raw and vulcanized rubbers. Identification of elastomers. Infrared spectrophotometric method.

U.S. Military Regulations and Norms

ARMY MIL-PRF-39014 G SUPP 1-2005 CAPACITOR, FIXED, CERAMIC DIELECTRIC (GENERAL PURPOSE), ESTABLISHED RELIABILITY AND NONESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR
ARMY MIL-PRF-39014 G-2005 CAPACITOR, FIXED, CERAMIC DIELECTRIC (GENERAL PURPOSE), ESTABLISHED RELIABILITY AND NONESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR
ARMY MIL-PRF-39001 D-2004 CAPACITORS, FIXED, MICA DIELECTRIC, ESTABLISHED RELIABILITY AND NONESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR

SE-SIS

SIS SMS 501-1963 ISO - restriction and cooperation system. introduce
SIS SMS 1830-1958 Metal fragments with cut lines, general introduction

IPC - Association Connecting Electronics Industries

IPC PE-74 SECTION 1- General Introduction
IPC TM-650 2.5.17.1A-1994 Volume and Surface Resistivity of Dielectric Materials

Society of Automotive Engineers (SAE)

SAE AMS3251J-2008 Synthetic Rubber and Cork Composition General Purpose Medium (Stabilized Type)
SAE AIR5314-2006 Introduction to Generic Open Architecture (GOA) Family of Documents
SAE AMS2610 Pressure Testing, Gaseous Media, Pressure as Specified
SAE AMS2610-2018 Pressure Testing, Gaseous Media Pressure as Specified
SAE MAM2604C Pressure Testing, Gaseous Media, 275 Kpa
SAE AMS2601G-2004 Pressure Testing@ Gaseous Media 10 psi
SAE MAM2604B-1994 Pressure Testing@ Gaseous Media 275 kPa
SAE MAM2601C-2003 Pressure Testing@ Gaseous Media 70 kPa
SAE MAM2601C Pressure Testing, Gaseous Media, 70 Kpa
SAE MAM2601A Pressure Testing, Gaseous Media, 70 Kpa
SAE AMS2601B Pressure Testing, Gaseous Media 10 Psi
SAE AMS2601G Pressure Testing, Gaseous Media 10 Psi
SAE AMS2601F Pressure Testing, Gaseous Media 10 Psi
SAE MAM2604B Pressure Testing, Gaseous Media, 275 Kpa
SAE MAM2601B Pressure Testing, Gaseous Media, 70 Kpa
SAE AMS2601A Pressure Testing, Gaseous Media 10 Psi
SAE AMS2601E Pressure Testing, Gaseous Media 10 Psi
SAE AMS2604F Pressure Testing, Gaseous Media, 40 Psi
SAE AMS2601 Pressure Testing, Gaseous Media 10 Psi
SAE AMS2604F-1994 Pressure Testing@ Gaseous Media 40 psi
SAE AMS2604G Pressure Testing, Gaseous Media, 40 Psi
SAE MAM2601 Pressure Testing, Gaseous Media, 70 Kpa

American Water Works Association (AWWA)

AWWA MTC64501 Colloidal and Non-Colloidal NOM Fouling of UF Membranes
AWWA WQTC69497 Colloidal Mobilization of Lead by Chlorine in Drinking Water Distribution Systems
AWWA WQTC57112 Biodegradability of Colloidal Versus Non-Colloidal NOM: Effects of Charge, Structure, and Molecular Weight

Building Officials and Code Administrators International(U.S.)

BOCA CHAPTER 42 NFPC-1999 Liquid and Solid Unstable (Reactive) Materials
BOCA CHAPTER 42 NFPC-1996 Liquid and Solid Unstable (Reactive) Materials

GCC Standardization Organization

GSO ISO 1147:2015 Plastics/rubber -- Polymer dispersions and synthetic rubber latices -- Freeze-thaw cycle stability test
GSO ISO 15086-1:2015 Hydraulic fluid power -- Determination of the fluid-borne noise characteristics of components and systems -- Part 1: Introduction

The Directorate General of Specifications and Metrology (DGSM)

OS GSO ISO 1147:2015 Plastics/rubber -- Polymer dispersions and synthetic rubber latices -- Freeze-thaw cycle stability test
OS GSO ISO 15086-1:2015 Hydraulic fluid power -- Determination of the fluid-borne noise characteristics of components and systems -- Part 1: Introduction
OS GSO ISO 787-21:2015 General methods of test for pigments and extenders -- Part 21: Comparison of heat stability of pigments using a stoving medium
OS GSO ISO 124:2015 Latex, rubber -- Determination of total solids content

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO ISO 1147:2016 Plastics/rubber -- Polymer dispersions and synthetic rubber latices -- Freeze-thaw cycle stability test
BH GSO ISO 124:2016 Latex, rubber -- Determination of total solids content

German Institute for Standardization

DIN V 4084-2:1974 Slope stability calculation method is used to prevent slope instability
DIN IEC 60475:1980 Method of sampling liquid dielectrics
DIN 6855-1:2021-11 Constancy testing of nuclear medical measuring systems - Part 1: Radiation counting systems for measurements in vivo and in vitro
DIN EN 2673 E:1990-10 Aerospace series - design and construction of pipelines for fluids in liquid or gaseous condition; rigid lines, manufacture
DIN 51402-2:1979 Determination of flue gases of oil burning systems; method by fluid means for detection of oil derivatives
DIN 6855-1 E:2008-04 Constancy testing of nuclear medical measuring systems - Part 1: Radiation counting systems for measurements in vivo and in vitro (IEC/TR 61948-1:2001, modified)
DIN EN ISO 10121-1 12015-10 Methods for determining the performance of gas phase air purification media and devices Part I: Gas phase air purification media
DIN 6855-1:2021 Constancy testing of nuclear medical measuring systems - Part 1: Radiation counting systems for measurements in vivo and in vitro
DIN 6855-1 E:2021-03 Constancy testing of nuclear medical measuring systems - Part 1: Radiation counting systems for measurements in vivo and in vitro (IEC/TR 61948-1:2001, modified)

British Standards Institution (BSI)

BS ISO 13099-3:2014 Colloidal systems. Methods for zeta potential determination. Acoustic methods
BS 5176:2003 Classification system for vulcanized rubbers - Specification
BS PD CEN/TS 17731:2022 Growing media. Determination of specific parameters
BS 5263:1975 Method for sampling liquid dielectrics
BS EN 13640:2002 Stability testing of in vitro diagnostic reagents
BS EN ISO 23640:2013 In vitro diagnostic medical devices. Evaluation of stability of in vitro diagnostic reagents
BS EN ISO 23640:2011 In vitro diagnostic medical devices. Evaluation of stability of in vitro diagnostic reagents
BS 903-A17:1973 Physical testing of rubber-Determination of the permeability of rubber to gases (constant volume method)
BS 903-C2:1982 Physical testing of rubber - Determination of volume resistivity
BS ISO 124:2008 Latex, rubber. Determination of total solids content
BS ISO 124:2011 Latex, rubber. Determination of total solids content
BS ISO 124:2014 Latex, rubber. Determination of total solids content
09/30213532 DC BS EN 60475. Method of sampling liquid dielectrics
BS 2782-7 Method 740B:1996 Methods of testing plastics. Rheological properties. Polymer dispersions and synthetic rubber latices. Freeze-thaw cycle stability test
BS CECC 00114-0:1994 Rule of procedure 14 - Quality assessment procedures - An introduction to the types of approval available under the CECC system

Association Francaise de Normalisation

NF EN IEC 61125:2018 Liquid insulators - Test methods for oxidation stability - Test method for evaluating the oxidation stability of liquid insulators as delivered
NF C27-475:1975 Method of sampling liquid dielectrics.
XP U44-730*XP CEN/TS 17731:2022 Growing media - Determination of specific parameters
NF T43-121*NF ISO 19846:2017 Reclaimed rubber - Coding and classification system
NF S92-032:2002 Stability testing of in vitro diagnostic reagents.
NF T31-230-21*NF EN ISO 787-21:2017 General methods of test for pigments and extenders - Part 21 : comparison of heat stability of pigments using a stoving medium
NF E48-392-1*NF ISO 15086-1:2002 Hydraulic fluid power - Determination of the fluid-borne noise characteristics of components and systems - Part 1 : introduction
NF S92-032:2014 In vitro diagnostic medical devices - Evaluation of stability of in vitro diagnostic reagents
NF E29-792*NF EN 13365:2002 Transportable gas cylinders - Cylinder bundles for permanent and liquefied gases (excluding acetylene) - Inspection at time of filling.
NF T42-003*NF ISO 124:2014 Latex, rubber - Determination of total solids content
NF T42-003:2011 Latex, rubber - Determination of total solids content.
NF T42-003:2009 Latex, rubber - Determination of total solids content.
NF ISO 124:2014 Rubber latex - Determination of total solids
NF S92-032*NF EN ISO 23640:2015 In vitro diagnostic medical devices - Evaluation of stability of in vitro diagnostic reagents

National Fire Protection Association (NFPA)

NFPA 1H PART 6 CHAPTER 72-2003 Unstable (Reactive) Solids and Liquids

ESDU - Engineering Sciences Data Unit

ESDU 74019 B-1981 THE STABILITY AND RESPONSE OF LINEAR SYSTEMS PART I: INTRODUCTORY CONCEPTS OF STABILITY
ESDU 74019 C-2006 The stability and response of linear systems. Part 1: Introduction.
SPC-M3-2-2007 Stability of two-fluid flow through a channel.
ESDU 82020 A-2001 Introduction to unsteady aerodynamics.

CZ-CSN

CSN 72 7011-1994 Determination of Steady State Thermal Conductivity of Materials. Methode of cylinder
CSN ON 06 3830-1962 Stable gas fuel combustion chamber
CSN 72 2246-1981 Volume stable Ume hydrate
CSN 34 6433-1985 Method of sampling liquid dielectrics
CSN ON 63 5330-1964 Hose Pressureless hose for gases and liquids (without insert)
CSN 35 8760-1973 Seraiconductors. Stabilizing diodes. Measurement of voltage temperature coefficient
CSN 72 2346-1983 Test method for dlmensional stability
CSN 72 2453-1968 Testing of volume stability of mortar
CSN 72 2248-1981 Determination o? volume stability o? limc hydrale

Bureau of Indian Standards

IS 14384-1996 Colloidal graphite dispersion in oil
IS 7541-2023 Stabilized Liquid Sulphur Trioxide - Specification

Japanese Industrial Standards Committee (JISC)

JIS K 6403:1999 Classification system for vulcanized rubber for automotive applications
JIS K 6403:2018 Classification system for vulcanized rubber for automotive applications
JIS Z 8836:2017 Colloidal systems -- Methods for zeta-potential determination -- Optical methods
JIS K 6387-2:1998 Latex, rubber -- Determination of total solids content
JIS K 6387-2:2011 Latex, rubber -- Determination of total solids content

IN-BIS

IS 6855-1973 Sampling Methods for Liquid Dielectrics

Korean Agency for Technology and Standards (KATS)

KS C 2135-2021 Testing methods for AC loss characteristics and permittivity(Dielectric constant) of solid electrical insulation
KS M ISO 12245-2008 Carbon blacks used in rubber products－Classification system
KS M ISO 12245:2013 Carbon blacks used in rubber products－Classification system
KS M ISO 12245:2008 Carbon blacks used in rubber products－Classification system
KS M ISO 13226-2022 Rubber Standard reference elastomers(SREs) for characterizing the effect of liquids on vu l canized rubbers
KS L ISO 13099-2-2018(2023) Colloidal systems — Methods for zetapotential determination — Part 2: Optical methods
KS L ISO 13099-3-2018(2023) Colloidal systems — Methods for zeta potential determination — Part 3: Acoustic methods
KS L ISO 13099-2:2018 Colloidal systems — Methods for zetapotential determination — Part 2: Optical methods
KS L ISO 13099-2-2018 Colloidal systems — Methods for zetapotential determination — Part 2: Optical methods
KS M ISO 13226-2007(2017) Rubber－Standard reference elastomers(SREs) for characterizing the effect of liquids on vuicanized rubbers
KS M 6702-2011 Rubber tubings for gas transfer application
KS M 6702-1985 Rubber tubings for gas transfer application

European Committee for Standardization (CEN)

EN ISO 21809-3:2016/A1:2020 Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 3: Field joint coatings - Amendment 1: Introduction of mesh-backed coating systems (ISO 21809-3:2016/Amd 1:2020)
CEN/TS 17731:2022 Growing media - Determination of specific parameters
FprCEN/TS 17731-2021 Growing media - Determination of specific parameters
CEN EN 13640-2002 Stability Testing of in Vitro Diagnostic Reagents
EN ISO 23640:2011 In vitro diagnostic medical devices - Evaluation of stability of in vitro diagnostic reagents [Superseded: CEN EN 13640]
EN ISO 23640:2013 In vitro diagnostic medical devices - Evaluation of stability of in vitro diagnostic reagents

American Society for Testing and Materials (ASTM)

ASTM D8099/D8099M-17 Standard Specification for Asphalt Emulsion Pavement Sealer (Mineral Colloid or Chemically Stabilized Type)
ASTM D4000-20 Standard Classification System for Specifying Plastic Materials
ASTM D1765-13 Standard Classification System for Carbon Blacks Used in Rubber Products
ASTM D1765-10 Standard Classification System for Carbon Blacks Used in Rubber Products
ASTM D8099/D8099M-17(2023) Standard Specification for Asphalt Emulsion Pavement Sealer (Mineral Colloid or Chemically Stabilized Type)
ASTM D5232-19 Standard Practice for Determining the Stability and Miscibility of a Solid, Semi-Solid, or Liquid Waste Material
ASTM D5232-92(2008) Standard Test Method for Determining the Stability and Miscibility of a Solid, Semi-Solid, or Liquid Waste Material
ASTM STP 182-1955 DETERMINATION OF THE SHEAR STABILITY OF NON-NEWTONIAN LIQUIDS
ASTM D5232-92(1997) Standard Test Method for Determining the Stability and Miscibility of a Solid, Semi-Solid, or Liquid Waste Material
ASTM D1765-06 Standard Classification System for Carbon Blacks Used in Rubber Products
ASTM D2149-13 Standard Test Method for Permittivity (Dielectric Constant) And Dissipation Factor Of Solid Ceramic Dielectrics At Frequencies To 10 MHz And Temperatures To 500&#176C</li><li><a class='stdlist_a' href='https://orochem.org/1030109802.html' target=_blank>ASTM D3832-79(2022)</a> Standard Specification for Rubber Seals Contacting Liquids in Solar Energy Systems</li><li><a class='stdlist_a' href='https://orochem.org/7804586.html' target=_blank>ASTM D2000-12(2017)</a> Standard Classification System for Rubber Products in Automotive Applications</li><li><a class='stdlist_a' href='https://orochem.org/5732575.html' target=_blank>ASTM D3832-79(2001)</a> Standard Specification for Rubber Seals Contacting Liquids in Solar Energy Systems</li></ul><h2 class='h4'><b>United States Navy</b>, Colloidal metastable system</h2> <ul><li><a class='stdlist_a' href='https://orochem.org/6263121.html' target=_blank>NAVY QPL-22262-QPD-2012</a> Abrasive Blasting Media Ship Hull Blast Cleaning</li><li><a class='stdlist_a' href='https://orochem.org/6256866.html' target=_blank>NAVY QPL-22262-2011</a> Abrasive Blasting Media Ship Hull Blast Cleaning</li><li><a class='stdlist_a' href='https://orochem.org/6139977.html' target=_blank>NAVY QPL-22262-QPD-2010</a> Abrasive Blasting Media Ship Hull Blast Cleaning</li><li><a class='stdlist_a' href='https://orochem.org/6566765.html' target=_blank>NAVY QPL-22262-QPD-2013</a> Abrasive Blasting Media Ship Hull Blast Cleaning</li></ul><h2 class='h4'><b>Danish Standards Foundation</b>, Colloidal metastable system</h2> <ul><li><a class='stdlist_a' href='https://orochem.org/1515237871.html' target=_blank>DANSK DS/CEN/TS 17731:2022</a> Growing media – Determination of specific parameters</li><li><a class='stdlist_a' href='https://orochem.org/6478872.html' target=_blank>DS-hæfte 21:2004</a> Introduction to a common management system - Environment, health and safety</li></ul><h2 class='h4'><b>Swedish Institute for Standards</b>, Colloidal metastable system</h2> <ul><li><a class='stdlist_a' href='https://orochem.org/1821412011.html' target=_blank>SS-ISO 15086-1:2001</a> Hydraulic fluid power - Determination of fluid-borne noise characteristics of components and systems - Part 1: Introduction</li><li><a class='stdlist_a' href='https://orochem.org/1395050917.html' target=_blank>SIS-CEN/TS 17731:2022</a> Growing media - Determination of specific parameters</li><li><a class='stdlist_a' href='https://orochem.org/1119577521.html' target=_blank>SS-EN 62562:2011</a> Cavity resonator method to measure the complex permittivity of low-loss dielectric plates</li><li><a class='stdlist_a' href='https://orochem.org/1763758329.html' target=_blank>DIN 4084 Beiblatt 1:2023</a> Soil - Calculation of the overall stability - Supplement 1: Examples of calculation</li></ul><h2 class='h4'><b>Standards Norway</b>, Colloidal metastable system</h2> <ul><li><a class='stdlist_a' href='https://orochem.org/1836636667.html' target=_blank>SN-CEN/TS 17731:2022</a> Growing media - Determination of specific parameters</li></ul><h2 class='h4'><b>Professional Standard - Light Industry</b>, Colloidal metastable system</h2> <ul><li><a class='stdlist_a' href='https://orochem.org/1060839054.html' target=_blank>QB/T 2857-2023</a> Glue stick</li><li><a class='stdlist_a' href='https://orochem.org/5135849.html' target=_blank>QB/T 2857-2007</a> Gule stick</li><li><a class='stdlist_a' href='https://orochem.org/1232079177.html' target=_blank>QB/T 1961-2023</a> Liquid glue</li></ul><h2 class='h4'><b>Association of German Mechanical Engineers</b>, Colloidal metastable system</h2> <ul><li><a class='stdlist_a' href='https://orochem.org/1204176929.html' target=_blank>VDI 2872 Blatt-1 E:2019-10</a> Lean production systems – Lean enterprise system – Introduction and fundamentals</li><li><a class='stdlist_a' href='https://orochem.org/1449570997.html' target=_blank>VDI 2870 BLATT 1-2012</a> Holistic production systems — basics, introduction and evaluation</li><li><a class='stdlist_a' href='https://orochem.org/1286628155.html' target=_blank>VDI 3822 Blatt 2-2-8-2015</a> Defects on elastomeric products caused by media-induced stress</li></ul><h2 class='h4'><b>U.S. Air Force</b>, Colloidal metastable system</h2> <ul><li><a class='stdlist_a' href='https://orochem.org/5642776.html' target=_blank>AIR FORCE MIL-PRF-87252 C (1)-2004</a> COOLANT FLUID, HYDROLYTICALLY STABLE, DIELECTRIC</li></ul><h2 class='h4'><b>Standard Association of Australia （SAA）</b>, Colloidal metastable system</h2> <ul><li><a class='stdlist_a' href='https://orochem.org/5963736.html' target=_blank>AS 1767.2.3:1999</a> Insulating liquids - Test methods - Method of sampling liquid dielectrics</li></ul><h2 class='h4'><b>Canadian Standards Association (CSA)</b>, Colloidal metastable system</h2> <ul><li><a class='stdlist_a' href='https://orochem.org/1940697576.html' target=_blank>CAN/CSA C22.2 No.297-2018(R2023)</a> Solid dielectric switchgear</li><li><a class='stdlist_a' href='https://orochem.org/2037229360.html' target=_blank>CAN/CSA-C22.2 NO.297-2018</a> Solid dielectric switchgear</li></ul><h2 class='h4'><b>Professional Standard - Commodity Inspection</b>, Colloidal metastable system</h2> <ul><li><a class='stdlist_a' href='https://orochem.org/6640040.html' target=_blank>SN/T 3449-2012</a> Detection and identification of candidatus phytoplasma in insect vector</li><li><a class='stdlist_a' href='https://orochem.org/6639904.html' target=_blank>SN/T 3371-2012</a> Latex,rubber.Determination of total solids content</li></ul><h2 class='h4'><b>BR-ABNT</b>, Colloidal metastable system</h2> <ul><li><a class='stdlist_a' href='https://orochem.org/5461460.html' target=_blank>ABNT MB-534-1972</a> PVC hard pipe. volume stability</li></ul><h2 class='h4'><b>Aerospace, Security and Defence Industries Association of Europe (ASD)</b>, Colloidal metastable system</h2> <ul><li><a class='stdlist_a' href='https://orochem.org/1873585547.html' target=_blank>ASD-STAN prEN 2642:1970</a> Structural adhesive systems - Adhesive film - Technical specification</li></ul><h2 class='h4'><b>GM North America</b>, Colloidal metastable system</h2> <ul><li><a class='stdlist_a' href='https://orochem.org/5088274.html' target=_blank>GM GM6008M-1989</a> Latex Foam Rubbers</li></ul><h2 class='h4'><b>YU-JUS</b>, Colloidal metastable system</h2> <ul><li><a class='stdlist_a' href='https://orochem.org/5535340.html' target=_blank>JUS N.C6.001-1981</a> Radio-frequency cables. Requirements for conductors and dielectric</li><li><a class='stdlist_a' href='https://orochem.org/5536042.html' target=_blank>JUS B.H3.566-1987</a> Liquid dielectrics. Method ofsampling</li></ul><h2 class='h4'><b>International Telecommunication Union (ITU)</b>, Colloidal metastable system</h2> <ul><li><a class='stdlist_a' href='https://orochem.org/1800380558.html' target=_blank>ITU-T H.460.24 (2009) Amd. 1-2011</a> Improvements for NAT traversal without intermediary entities</li></ul><h2 class='h4'><b>GM Holden Ltd</b>, Colloidal metastable system</h2> <ul><li><a class='stdlist_a' href='https://orochem.org/1918777511.html' target=_blank>HOLDEN HN 1229-2001</a> Adhesive - Dielectric - Solvent Type</li></ul><h2 class='h4'><b>International Electrotechnical Commission (IEC)</b>, Colloidal metastable system</h2> <ul><li><a class='stdlist_a' href='https://orochem.org/126.html' target=_blank>IEC 60475:1974</a> Method of sampling liquid dielectrics</li></ul><h2 class='h4'><b>VN-TCVN</b>, Colloidal metastable system</h2> <ul><li><a class='stdlist_a' href='https://orochem.org/7956806.html' target=_blank>TCVN 6315-2015</a> Latex,rubber - Determination of total solids content</li><li><a class='stdlist_a' href='https://orochem.org/7064285.html' target=_blank>TCVN 6315-2007</a> Latex, rubber.Determination of total solids content</li><li><a class='stdlist_a' href='https://orochem.org/7054242.html' target=_blank>TCVN 6873-2007</a> Gas cylinders.Cylinder bundles for compressed and liquefied gases (excluding acetylene).Inspection at time of filling</li></ul><h2 class='h4'><b>The Society for Protective Coatings (SSPC)</b>, Colloidal metastable system</h2> <ul><li><a class='stdlist_a' href='https://orochem.org/1028453690.html' target=_blank>SSPC PS 24.00-1991(2004)</a> Latex Painting System for Industrial and Marine Atmospheres, Performance-Based</li><li><a class='stdlist_a' href='https://orochem.org/1875826291.html' target=_blank>SSPC PS Guide 15.00-1982(2004)</a> Guide for Selecting Chlorinated Rubber Painting Systems</li></ul><h2 class='h4'><b>Association for Electrical, Electronic & Information Technologies (VDE)</b>, Colloidal metastable system</h2> <ul><li><a class='stdlist_a' href='https://orochem.org/1322721445.html' target=_blank>VDE 0370-3 DIN VDE 0370-3-1980*DIN IEC 60475:1980</a> Method of sampling liquid dielectrics</li></ul><h2 class='h4'><b>European Association of Aerospace Industries</b>, Colloidal metastable system</h2> <ul><li><a class='stdlist_a' href='https://orochem.org/5164803.html' target=_blank>AECMA TR 2675-1996</a> Serie Aerospatiale Conception Et Realisation De Tuyaux Et Tuyauteries Flexibles Pour Fluides Liquide Et Gazeux, Installation Edition 1</li></ul><h2 class='h4'><b>Indonesia Standards</b>, Colloidal metastable system</h2> <ul><li><a class='stdlist_a' href='https://orochem.org/7738439.html' target=_blank>SNI 04-6544-2001</a> Methods of sampling liquid dielectrics</li></ul><h2 class='h4'><b>未注明发布机构</b>, Colloidal metastable system</h2> <ul><li><a class='stdlist_a' href='https://orochem.org/1819926055.html' target=_blank>ATV-DVWK-M 901:2002-03</a> Structural stability of mineral soils used for arable land, Part III: Methods for sustainable soil management</li></ul><h2 class='h4'><b>American Dental Association</b>, Colloidal metastable system</h2> <ul><li><a class='stdlist_a' href='https://orochem.org/1392371820.html' target=_blank>ADA 82-1996(R2009)</a> Reversible/Irreversible Hydrocolloid Impression Systems</li></ul><h2 class='h4'><b>Heilongjiang Provincial Standard of the People's Republic of China</b>, Colloidal metastable system</h2> <ul><li><a class='stdlist_a' href='https://orochem.org/1247803493.html' target=_blank>DB2308/T 194-2024</a> Drought-resistant and stable-yield cultivation techniques for soybeans under crop rotation system</li></ul><h2 class='h4'><b>Institute of Electrical and Electronics Engineers (IEEE)</b>, Colloidal metastable system</h2> <ul><li><a class='stdlist_a' href='https://orochem.org/1283753132.html' target=_blank>IEEE Industry Connections (IEEE-IC) 3D Body Processing (3DBP) Initiative - An Introduction 2017</a> An Introduction to the 3D Body Processing (3DBP) Initiative</li></ul><h2 class='h4'><b>PL-PKN</b>, Colloidal metastable system</h2> <ul><li><a class='stdlist_a' href='https://orochem.org/5938965.html' target=_blank>PN E04403-1986</a> Solide electric insulating materials Measurements of the permittivity and dielectric dissipation factor</li></ul><h2 class='h4'><b>RO-ASRO</b>, Colloidal metastable system</h2> <ul><li><a class='stdlist_a' href='https://orochem.org/5606695.html' target=_blank>STAS 11899-1980</a> HAND DRIVE SCREW-GEARED PULLEY FOR EXPLOSION HAZARD MEDIUM Typification</li><li><a class='stdlist_a' href='https://orochem.org/5608933.html' target=_blank>STAS 1271-1982</a> COLLOIDAL ALUMINA</li><li><a class='stdlist_a' href='https://orochem.org/5951022.html' target=_blank>STAS 8798/14-1975</a> Rubber latex Determination of mechanical stability of synthetic rubber latex</li></ul><h2 class='h4'><b>ABS - American Bureau of Shipping</b>, Colloidal metastable system</h2> <ul><li><a class='stdlist_a' href='https://orochem.org/1982736640.html' target=_blank>ABS 285-2017</a> GUIDANCE NOTES ON IN-SERVICE HULL STABILITY VERIFICATION</li></ul><h2 class='h4'><b>Professional Standard - Urban Construction</b>, Colloidal metastable system</h2> <ul><li><a class='stdlist_a' href='https://orochem.org/5136599.html' target=_blank>CJ/T 256-2007</a> Pilot control pressure reducing valve</li></ul></div> </div> <hr> </div> <br><br> <hr> <div class='container small'> <p class='text-center'> Copyright ©2007-2023 ANTPEDIA, All Rights Reserved </p> </div> <script src="//www.antpedia.com/standard/js_country.php"></script> </body> </html>

Others: