Yijian Electromechanical Transformer Handover Test Tips

Yijian Electromechanical Transformer Handover Test Tips, Total:498 items.

The international standard classification for "Yijian Electromechanical Transformer Handover Test Tips" includes: Transformers. Reactors , Electric traction equipment , Motors , Insulators , Components for rotating machines , Railway rolling stock in general .

The Chinese standard classification for "Yijian Electromechanical Transformer Handover Test Tips" includes: Control circuit apparatus , Transformer , Electric traction equipment , Asynchronous machine , High voltage switchgear , Insulator , Basic standards and general methods , Electric rotating machinery in general , Electric locomotives , Locomotive manufacturing equipment , Signal equipment , Technical management .

Professional Standard - Electricity

DL/T 2007-2019 Electric test integrated wiring test method for power transformer
DL/T 1399.5-2022 Electric power test/inspection vehicle Part 5: Power transformer partial discharge test vehicle
DL/T 2033-2019 Test methods for power unit of high voltage variable frequency drive used in fossil-fuel power plants
DL/T 2293-2021 Field test guide for no-load loss and load loss of power transformer
DL/T 2392-2021 Code of practice for hand-over test of primary power equipment in10 kV distribution network
DL/T 1331-2014 Test Guidance for AC Transformer Device without Demolishing High-voltage Leads
DL/T 1798-2018 Code of commissioning and prophylactic test for converter transformer
DL/T 1945-2018 Specification of standard interface for HVDC transformer
DL/T 1799-2018 The method of ability to withstand DC bias test for power transformers
DL/T 264-2012 Guide for field sealing test of oil immersed power transformer
DL/T 264-2022 Guide for field sealing test of oil immersed power transformer
DL/T 1399.4-2020 Electric power testing and measuring vehicles-Part 4:Testing vehicle for AC withstand voltage on switchgear
DL/T 2008-2019 The field testing procedure for complex combination of power transformer, GIS and power cable
DL/T 1981.9-2021 Unified power flow controller一Part 9: Code for acceptance test
DL/T 2225-2021 Guide for DC demagnetization test on power transformers
DL/T 2557-2022 Guide for on-site test of applied AC voltage withstand with partial discharge measurement on valve windings of converter transformer
DL/T 265-2012 Field test guide on the on-load tap-changer for transformer

Professional Standard - Commodity Inspection

SN/T 0811-2012 Rules for the entry-exit inspeciton of power transformers|| power supplies|| reactors and similar products. General requirements
SN/T 1179-2003 Rules for the inspection of power transformers for export
SN/T 1431.6-2012 Rules for the inspection of low-voltage appliances for import and export-Part 6:Energy efficiency of AC contactor
SN/T 1029-2001 Rules for the inspection of low-voltage electromechanical contactors and motor starters for export
SN/T 1179.1-2007 Rules for the inspection of power transformers for import and export-Part 1:General requirements
SN/T 1431.4-2011 Rules for the Inspection of Low-voltage Electrical Apparatus for Import and Export. Part 4: Low-voltage Electromechnical Contactors and Motor Starters Installations

Group Standards of the People's Republic of China

T/CEC 159-2018 Technical specification for extension interface of substation robot inspection system
T/CEEIA 683-2023 Test method for flameproof performance of tap-changer separators of HV/UHV converter transformers
T/SDPEA 0006-2018 Guide for operation and maintenance regulations of natural ester insulating oil-immersed power transformers part 1: standard for hand-over Test
T/CEC 682-2022 Technical specification for power transformer integrated wiring electrical test device
T/CEEIA 510-2021 A.C. voltage withstand test guide of rotor winding for adjustable speed pumped motor-generators
T/GDCKCJH 055-2022 Guide for on-site temperature rise test of distribution transformer
T/CEC 325-2020 Guidelines for testing power electronic transformers for AC and DC distribution networks
T/CEEIA 705-2023 Guidelines on seismic test for power transformers
T/CECA 97-2024 Requirements and test methods for tension control of automatic winding machines for electronic transformers
T/CEEIA 491.3-2020 Evaporative cooling power transformers -Part3: Test
T/CEEIA 682-2023 Test method for tap-changer pressure relief device of HV/UHV converter transformers
T/CSEE 0213-2021 Test methods for low-voltage three-level AC/DC, DC/DC bidirectional converters
T/CEC 505-2021 Guidelines for insulation tests of dry-type high-frequency transformers for power electronic transformers

Professional Standard - Aerospace

QJ 1323.4-1987 Electromagnetic relay test method alternating damp heat test

工业和信息化部

JB/T 501-2021 Test guide for power transformers
JB/T 2290-2020 Low-voltage contactors and AC motor-starters in ships

Professional Standard - Machinery

JB/T 2290-2007 Low-voltage contactors and AC motor-starters in ships
JB/T 501-1991 Guidelines for Testing Power Transformers
JB/T 6461-1992 Test of induced current by switching of AC HV earthing switches
JB/T 7143.2-1993 Test methods for inverters for wind turbines
JB/T 2290-1993 LOW－voltage contactors and AC motor starters in ships
JB/T 501-2006 Test guide for power transformers

Professional Standard - Energy

NB/T 11070-2023 Guide to the high-voltage alternating-current generator circuit-breakers

Taiwan Provincial Standard of the People's Republic of China

CNS 9800-2001 Production test for pressure vessels
CNS 6559-1980 Output Transformers for Radio Broadcast Receivers
CNS 14715-2003 Electric resistance welding－Integrated transformers for welding guns

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 7449-1987 Guide to the lightning impulse and switching impulse testing of power transformers and reactors
GB/T 25117.1-2010 Railway applications—Rolling stock—Combined testing—Part 1:Combined testing of inverter-fed alternating current motors and their control system
GB/T 19212.8-2012 Safety of power transformers power supplies reactors and similar products―Part 8:Particular requirements and tests for transformers and power supplies for toys
GB 19212.14-2012 Safety of transformers,reactors,power supply units and similar products for supply voltages up to 1100V.Part 14:Particular requirements and tests for auto transformers and power supply units incorporating auto transformers
GB/T 14808-2016 High voltage AC contactors, contactor based controllers and motor starters
GB/T 25120-2010 Railway applications—Traction transformers and inductors on board rolling stock
GB 19212.5-2011 Safety of transformers,reactors,power supply units and similar products for supply voltages up to 1100 V.Part 5:Particular requirements and tests for isolating transformers and power supply units incorporating isolating transformers
GB 7449-1987 Guide to the lightning impulse and switching impulse testing of power transformers and reactors
GB/T 22720.1-2008 Rotating electrical machines - Qualification and type tests for - Type Ⅰelectrical insulation systems used in rotating electrical machines fed from voltage converters
GB/T 19212.2-2012 Safety of power transformers, power supplies, reactors and similar products―Part 2:Particular requirements and tests for separating transformers and power supplies incorporating separating transformers for general applications
GB/T 32877-2022 Specific test methods for determining losses and efficiency of converter-fed AC motors
GB/T 19212.14-2012 Safety of transformers,reactors,power supply units and similar products for supply voltages up to 1 100 V―Part 14:Particular requirements and tests for auto transformers and power supply units incorporating auto transformers
GB/T 25096-2010 Composite station post insulators for substations with AC voltages greater than 1 000 V—Definitions,test methods and acceptance riteria
GB/T 25117.3-2010 Railway applications—Rolling stock—Combined testing—Part 3:Combined testing of alternating current motors fed by an indirect converter and their control system
GB/T 1094.4-2005 Power transformers - Part 4: Guide to the lightning impulse and switching impulse testing - Power transformers and reactors
GB/T 25120-2023 Railway applications—Traction transformers and inductors on board rolling stock
GB/T 32877-2016 Specific test methods for determining the loss and efficiency of AC induction motors supplied by frequency converters
GB/T 19212.3-2012 Safety of power transformers,power supplies,reactors and similar products―Part 3:Particular requirements and tests for control transformers and power supplies incorporating control transformers
GB/T 25122.1-2010 Railway applications—Power convertors installed on board rolling stock—Part 1:Characteristics and test methods
GB/T 7675-1987 The capacitor banks switching tests for A.C. high-voltage circuit-breaker
GB 19212.3-2012 Safety of power transformers,power supplies,reactors and similar products.Part 3:Particular requirements and tests for control transformers and power supplies incorporating control transformers
GB/T 19212.5-2011 Safety of transformers,reactors,power supply units and similar products for supply voltages up to 1 100 V―Part 5:Particular requirements and tests for isolating transformers and power supply units incorporating isolating transformers
GB 19212.2-2012 Safety of power transformers,power supplies,reactors and similar products.Part 2:Particular requirements and tests for separating transformers and power supplies incorporating separating transformers for general applications
GB/T 14808-2001 High-voltage alternating current contactors and contactor-based motor-starters

Professional Standard - Railway

TB/T 2522-1995 Test Method for Temperature Rise Test after Loading of Electric Locomotive Main Transformer
TB/T 1680-2006 Railway applications-Traction transformer and inductors on board rolling stock
TB/T 3186-2007 Technical specification of testing experiment for power convertor dynamic loading of AC-DC electric locomotive
TB/T 2313-1992 Lightning Impulse Test for Transformer, Relay and Silicon Rectifier for Railway Signal

未注明发布机构

JIS C 61558-2-4:2024 Safety of transformers, reactors, power supply units and combinations thereof -- Part 2-4: Particular requirements and tests for isolating transformers and power supply units incorporating isolating transformers for general applications
CAN/CSA-E61558-1-2012(R2017) Safety of power transformers, power supplies, reactors and similar products — Part 1: General requirements and tests
JIS C 61558-1 AMD 1:2024 Safety of transformers, reactors, power supply units and combinations thereof -- Part 1: General requirements and tests (Amendment 1)
IEEE Std C57.129-2017 General requirements and test code for oil-immersed HVDC converter transformers
GJB 9287-2017 Specification for marine AC medium voltage contactors and contactor-based motor starters
AS/NZS 61558.1:2018/AMD 2:2020 Safety of power transformers, power supply units and similar - General requirements and tests
AS/NZS 61558.1:2018/AMD 1:2020 Safety of power transformers, power supply units and similar - General requirements and tests
JIS C 61558-2-2:2024 Safety of transformers, reactors, power supply units and combinations thereof -- Part 2-2: Particular requirements and tests for control transformers and power supply units incorporating control transformers
JIS C 61558-2-13:2024 Safety of transformers, reactors, power supply units and combinations thereof -- Part 2-13: Particular requirements and tests for auto-transformers and power supply units incorporating auto-transformers for general applications
CSA E61558-2-13-2020 Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V — Part 2-13: Particular requirements and tests for auto transformers and power supply units incorporating auto transformers
AS/NZS 61558.1:2018(R2020) Safety of power transformers, power supply units and similar - General requirements and tests
JIS C 61558-2-6:2024 Safety of transformers, reactors, power supply units and combinations thereof -- Part 2-6: Particular requirements and tests for safety isolating transformers and power supply units incorporating safety isolating transformers for general applications

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 25122.1-2018 Railway applications—Power converters installed on board rolling stock—Part 1:Characteristics and test methods
GB/T 19212.13-2019 Safety of transformers，reactors，power supply units and combination thereof—Part 13: Particular requirements and tests for constant voltage transformers and power supply units for constant voltage
GB/T 19212.24-2020 Safety of transformers,reactors,power supply units and combinations thereof—Part 24:Particular requirements and test for transformers and power supply units for construction sites

Professional Standard - Electron

SJ 2587-1985 Generic specification for integrated flyback transformers for use in black/white television broadcast receivers
SJ 2947-1988 Intermediate-frequency transformers with internal tuning capacitor(s) for colour television broadcast receivers
SJ/T 9553.6-1993 Power supplies transformers for black-white TV recievers--Quality grading standard

Military Standard of the People's Republic of China-General Armament Department

GJB 1320.1-1991 Marine AC motor starter AC direct (full voltage) starter

未注明发布机构

CAN/CSA-E61558-1-2012(R2017) Safety of power transformers, power supplies, reactors and similar products — Part 1: General requirements and tests
AS/NZS 61558.1:2018/AMD 1:2020 Safety of power transformers, power supply units and similar - General requirements and tests
JIS C 61558-2-13:2024 Safety of transformers, reactors, power supply units and combinations thereof -- Part 2-13: Particular requirements and tests for auto-transformers and power supply units incorporating auto-transformers for general applications
AS/NZS 61558.1:2018/AMD 2:2020 Safety of power transformers, power supply units and similar - General requirements and tests
IEEE Std C57.129-2017 General requirements and test code for oil-immersed HVDC converter transformers
AS/NZS 61558.1:2018(R2020) Safety of power transformers, power supply units and similar - General requirements and tests
GJB 9287-2017 Specification for marine AC medium voltage contactors and contactor-based motor starters
JIS C 61558-2-2:2024 Safety of transformers, reactors, power supply units and combinations thereof -- Part 2-2: Particular requirements and tests for control transformers and power supply units incorporating control transformers
JIS C 61558-2-4:2024 Safety of transformers, reactors, power supply units and combinations thereof -- Part 2-4: Particular requirements and tests for isolating transformers and power supply units incorporating isolating transformers for general applications
JIS C 61558-2-6:2024 Safety of transformers, reactors, power supply units and combinations thereof -- Part 2-6: Particular requirements and tests for safety isolating transformers and power supply units incorporating safety isolating transformers for general applications
CSA E61558-2-13-2020 Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V — Part 2-13: Particular requirements and tests for auto transformers and power supply units incorporating auto transformers
JIS C 61558-1 AMD 1:2024 Safety of transformers, reactors, power supply units and combinations thereof -- Part 1: General requirements and tests (Amendment 1)

机械工业部

JB 6204-1992 Specifications for stator insulation withstand voltage test of large high-voltage AC motors

National Metrological Technical Specifications of the People's Republic of China

JJF 1673-2017 Calibration Specification for Voltage Dips,Short Interruptions and Voltage Variations Test Generators

Society of Automotive Engineers (SAE)

SAE TS355-1-1987 TS355 Test for Electrical Connectors Contact Deformation after Crimping
SAE J56-1999 Road Vehicles - Alternators with Regulators - Test Methods and General Requirements

SE-SIS

SIS SS-ISO 5826:1987 Transformers for resistance welding machines - General specifications applicable to all transformers

CZ-CSN

CSN 35 1083-1985 Power transformers. Short-circuit tests of transformers
CSN 35 1088-1984 Power transformers. Methods for insulation electrical strength tests under alternating voltage
CSN 35 1082-1986 Power transformers. Methods of tempe-rature—rise tests
CSN 35 1452-1984 Power transformers. On-load tap-changers. Methods of tests
CSN 35 1325 Cast.2-1989 Transformers and inductors for communication equipment. General technical requirements and test methods
CSN 35 1084-1985 Power transiormors end reactors. Methods for electrical strength tests undor lightning impulse

American National Standards Institute （ANSI)

ANSI/EIA 364-07C:2007 Electric Connectors - Crimp Contact Deformation Test Procedure
ANSI/EIA 364-07B:1998 Electric Connectors - Crimp Contact Deformation Test Procedure
ANSI/IEEE C57.116:1990 Guide for Transformers Directly Connected to Generators
ANSI/IEEE C57.12.37:2006 Standard for the Electronic Reporting of Distribution Transformer Test Data
ANSI/EIA 364-20D:2008 Electric Connectors - Withstanding Voltage Test Procedure
ANSI/IEEE C37.09b:2010 Standard Test Procedure for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis -Amendment 2: To Change the Description of Transient Recovery Voltage for Harmonization with IEC 62271-100
ANSI/EIA 364-20B:1999 Electric Connectors - Withstanding Voltage Test Procedure
ANSI/IEEE C57.12.90:2010 Standard Test Code for Liquid-Immersed Distribution, Power, and Regulating Transformers
ANSI/IEEE C57.138:1998 Recommended Practice for Routine Impulse Test for Distribution Transformers
ANSI/EIA 364-04A:2001 TP-04, Normal Force Test Procedure for Electrical Connectors
ANSI/EIA 364-40B:1998 Electric Connectors – Crush Test Procedure
ANSI/EIA 364-39B:1999 Electric Connectors – Hydrostatic Test Procedure
ANSI/EIA 364-12A:2005 Restricted Entry Test Procedure for Electrical Connectors and Sockets
ANSI/EIA 364-40B:2009 Crush Test Procedure for Electrical Connectors
ANSI C37.53.1-1989 Switchgear - High-Voltage Current-Limiting Motor-Starter Fuses - Conformance Test Procedures

Korean Agency for Technology and Standards (KATS)

KS R 1044-2001(2011) Road vehicles－Alternators with regulators－Test methods and general requirements
KS C 0902-1982 Impulse voltage testing for transformers
KS C 1001-1970 Impulse voltage testing for instrument transformers
KS C ISO 5826:2021 Resistance welding equipment — Transformers —General specifications applicable to all transformers
KS C 0902-2011 Impulse voltage testing for transformers
KS C IEC 60427-2002(2012) Synthetic testing of high－voltage alternating current circuit－breakers
KS C IEC 61558-2-23:2005 Safety of power transformers, power supply units and similar devices－Part 2－23：Particular requirements for transformers for construction sites
KS C IEC 61558-2-23:2017 Safety of power transformers, power supply units and similar devices－Part 2－23：Particular requirements for transformers for construction sites
KS C 1207-1980 ALTERNATING-CURRENT WATT-HOUR METERS (FOR CONNECTION THROUGH INSTRUMENT TRANSFORMER)
KS C 1207-1995(2000) ALTERNATING-CURRENT WATT-HOUR METERS (FOR CONNECTION THROUGH INSTRUMENT TRANSFORMER)
KS C 4005-2002 GENEIRAL RULES FOR DIREC-ON-LINE (FULL-VOLTAGE) A.C.STARTERS FOR INDUCTION MOTORS
KS C 6047-1995 Testing methods of power transformers for electronic equipment
KS C IEC 60076-4-2023 Power transformers－Part 4：Guide to the lightning impulse and switching impulse testing－Power transformers and reactors
KS C IEC 60076-4-2008(2018) Power transformers－Part 4：Guide to the lightning impulse and switching impulse testing－Power transformers and reactors
KS C IEC 61558-2-4:2022 Safety of transformers, reactors, power supply units and combinations thereof — Part 2-4: Particular requirements and tests for isolating transformers and power supply units incorporating isolating tr
KS C IEC 61558-2-1:2022 Safety of transformers, reactors, power supply units and combinations thereof — Part 2-1: Particular requirements and tests for separating transformers and power supply units incorporating separating
KS C 6047-2020 Testing methods of power transformers for electronic equipment
KS C IEC 60076-4:2008 Power transformers-Part 4:Guide to the lightning impulse and switching impulse testing-Power transformers and reactors
KS C IEC 61377-3-2003(2013) Railway applications ― Rolling stock ― Part 3: Combined testing of alternating current motors, fed by an indirect convertor, and their control system
KS C IEC 61558-1:2022 Safety of transformers, reactors, power supply units and combinations thereof — Part 1: General requirements and tests
KS C IEC 61558-1:2002 Safety of power transformers, power supply units and similar－Part 1：General requirements and tests
KS C IEC 61558-2-12:2005 Safety of power transformers, power supply units and similar devices-Part 2-12:Particular requirements for constant voltage transformers
KS C IEC 61558-1:2017 Safety of power transformers, power supply units and similar－Part 1：General requirements and tests
KS C IEC 61558-2-6:2022 Safety of transformers, reactors, power supply units and combinations thereof — Part 2-6: Particular requirements and tests for safety isolating transformers and power supply units incorporating safet
KS B ISO 789-10:2002 Agricultural tractors--Test procedures--Part 10：Hydraulic power tractor/implement interface
KS W 1922-2002(2012) Aircraft－Electrical connectors－Tests
KS C 6044-1979 Testing methods of high frequency inductors and intermediate frequency transformers for electronic equipment
KS C 6044-2002 Testing methods of high frequency inductors and intermediate frequency transformers for electronic equipment
KS B 6538-1972(2011) Test code of hydraulic torque converters for construction machineries and industrial vehicles
KS C IEC 61558-2-12-2017(2022) Safety of Transforemers, Reactors, Power supply units and combination thereof — Part 2-12: Particular requirements and tests for control voltage transformers and power supply units for constant voltag
KS C IEC 61558-2-16-2023 Safety of transformers, reactors, power supply units and combinations thereof — Part 2-16: Particular requirements and tests for switch mode power supply units and transformers for switch mode power supply units for general applications
KS C IEC 60722:2002 Guide to the lightning impulse and switching impulse testing of power transformers and reactor
KS C IEC 60722:2013 Guide to the lightning impulse and switching impulse testing of power transformers and reactor

RU-GOST R

GOST R 55014-2012 Power transformers. Tests for mechanical strength of tanks
GOST 28167-1989 Semiconductor alternating voltage converters. General specifications
GOST 20247-1981 Power furnace transformers and transformer units. General specifications
GOST 3484.2-1988 Power transformers. Heating tests
GOST 3484.5-1988 Power transformers. Tank tests for leakages
GOST 3484.4-1988 Power transformers. Tank tests for strength
GOST R 55015-2012 Power transformers. Tanks leakage tests
GOST 20243-1974 Power transformers. Methods of short-circuit tests
GOST 11983-1981 Television receivers. Pulse output line transformers. General specifications
GOST 22756-1977 Power and voltage transformers and reactors. Test methods of electric insulation strength
GOST IEC 61558-2-14-2015 Safety of transformers, reactors, power supply units and combinations thereof. Part 2-14. Particular requirements and tests for variable transformers and power supply units incorporating variable transformers
GOST IEC 61558-2-7-2012 Safety of power transformers, power supplies. Part 2-7. Particular requirements and test for transformers and power supplies for toys
GOST 30606-1998 Digital converters for voltage or current measuring. Basic parameters. General technical requirements. Methods of tests
GOST 33324-2015 Traction transformers and inductors on board railway rolling stock. Basic parameters and test methods
GOST 21023-1975 Power transformers. Methods of measuring partial discharge characteristics during power frequency voltage testing
GOST 13384-1981 Measuring transformers for thermocouple and resistance thermometers SSI. General technical conditions
GOST 13384-1993 Measuring transducers for thermoelectric transducers and resistance thermotransducers. General technical requirements and methods of tests

GOSTR

GOST 9736-1991 Electric apparatus of direct transformation for measuring non-electrical values. General technical requirements and methods of tests

PL-PKN

PN E81106-1985 Welding Single operator type arc welding transformers Requirements and tests
PN E04070-15-1986 Power transformers Test methods Measurement of intensity of partial discharge with alternating voltage
PN E04063-1966 Power transformers Testing methods of tap changing equipment
PN E04063-02-1987 On-load tap changers Test methods Contacts pressure
PN E04070-13-1986 Power transformers Test methods Lightning impulse test
PN E04070-11-1986 Power transformers Test methods Test of temperature rise
PN E04070-04-1986 Power transformers Test methods Test of tightness and strength of tank
PN E04070-17-1986 Power transformers Test methods Determination of noise parameters
PN E06074-1974 Extra-low vol?age sa?ety rectificer uni?s Generals requirements and tests

British Standards Institution (BSI)

BS EN 61558-2-14:2013 Safety of transformers, reactors, power supply units and combination thereof. Particular requirements and tests for variable transformers and power supply units incorporating variable transformers
BS EN 61558-2-8:2010 Safety of transformers, reactors, power supply units and combinations thereof. Particular requirements and tests for transformers and power supply units for bells and chimes
BS EN 61558-2-23:2010 Safety of transformers, reactors, power supply units and combinations thereof. Particular requirements and tests for transformers and power supply units for construction sites
BS EN 61558-2-12:2011 Safety of transformers, reactors, power supply units and combinations thereof. Particular requirements and tests for constant voltage transformers and power supply units for constant voltage
BS EN 60512-16-7:2008 Connectors for electronic equipment – Tests and measurements –– Part 16-7: Mechanical tests on contacts and terminations – Test 16g: Measurement of contact deformation after crimping
BS EN 61558-2-6:2009 Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1100 V. Particular requirements and tests for safety isolating transformers and power supply units incorporating safety isolating transformers
BS ISO/OECD 789-10:2006 Agricultural tractors - Test procedures - Hydraulic power at tractor/implement interface
BS EN 61558-2-9:2011 Safety of transformers, reactors, power supply units and combinations thereof. Particular requirements and tests for transformers and power supply units for class III handlamps for tungsten filament lamps
BS EN 61558-1:2005+A1:2009 Safety of power transformers, power supplies, reactors and similar products — Part 1: General requirements and tests
BS EN 60470:2001 High-voltage alternating current contactors and contactor-based motor starters
BS EN 50327:2003 Railway applications - Fixed installations - Harmonisation of the rated values for converter groups and tests on converter groups
BS EN 61558-1:1998 Safety of power transformers, power supply units and similar - General requirements and tests
BS EN 61558-1+A1:2006 Safety of power transformers, power supplies, reactors and similar products - General requirements and tests
BS EN 60512-16-4:2008 Connectors for electronic equipment - Tests and measurements - Part 16-4: Mechanical tests on contacts and terminations — Test 16d: Tensile strength (crimped connections)
BS EN 61558-2-4:2009 Safety of transformers, reactors,power supply units and similar products for supply voltages up to 1100 V. Particular requirements and tests for isolating transformers and power supply units incorporating isolating transformers
BS EN 60512-4-1:2003 Connectors for electronic equipment - Tests and measurements - Voltage stress tests - Test 4a - Voltage proof
BS EN 61377-3:2003 Railway applications - Rolling stock - Combined testing of alternating current motors, fed by an indirect convertor, and their control system
BS EN 61377-3:2002 Railway applications - Rolling stock - Combined testing of alternating current motors, fed by an indirect convertor, and their control system
21/30434832 DC BS EN IEC 61558-2-14. Safety of transformers, reactors, power supply units and combinations thereof. Part 2-14. Particular requirements and tests for variable transformers and power supply units incorporating variable transformers for general applications
BS EN 61558-2-2:2007 Safety of power transformers, power supplies, reactors and similar products - Particular requirements and tests for control transformers and power supplies incorporating control transformers
BS IEC 60076-10-1:2016+A1:2020 Power transformers. Standard requirements, terminology, and test code for step-voltage regulators
BS IEC 60076-10-1:2016 Power transformers. Determination of sound levels. Application guide
BS IEC 60076-21:2012 Power transformers. Standard requirements, terminology, and test code for step-voltage regulators
BS PD IEC/TS 60034-2-3:2013 Rotating electrical machines. Specific test methods for determining losses and efficiency of converter-fed AC induction motors
BS EN IEC 61558-2-10:2024 Safety of transformers, reactors, power supply units and combinations thereof - Particular requirements and tests for separating transformers with high insulation level and separating transformers with output voltages exceeding 1 000 V
BS EN 61558-2-1:2007 Safety of power transformers, power supplies, reactors and similar products - Particular requirements and tests for separating transformers and power supplies incorporating separating transformers for general applications
BS EN 3-3:1996 Portable fire extinguishers - Construction, resistance to pressure, mechanical tests
BS EN 2591-503:2001 Elements of electrical and optical connection - Test methods - Contact deformation after crimping
BS EN 61558-2-10:2014 Safety of transformers, reactors, power supply units and combinations thereof. Particular requirements and tests for separating transformers with high insulation level and separating transformers with output voltages exceeding 1 000 V
BS EN IEC 61558-1:2019 Safety of transformers, reactors, power supply units and combinations thereof - General requirements and tests
BS EN 61046:1995 Specification for d.c. or a.c. supplied electronic step-down convertors for filament lamps. General and safety requirements
BS 4941-4:1977*IEC 292-4:1975 Specificationfor Motorstartersforvoltages upto andincluding1000VA.C. and1200VD.C. Part 4 . Reducedvoltage A.C. starters, two - step auto - transformer starters

KR-KS

KS C ISO 5826-2021 Resistance welding equipment — Transformers —General specifications applicable to all transformers
KS C IEC 60076-4-2008(2023) Power transformers－Part 4：Guide to the lightning impulse and switching impulse testing－Power transformers and reactors
KS C IEC 61558-2-4-2022 Safety of transformers, reactors, power supply units and combinations thereof — Part 2-4: Particular requirements and tests for isolating transformers and power supply units incorporating isolating tr
KS C IEC 61558-2-1-2022 Safety of transformers, reactors, power supply units and combinations thereof — Part 2-1: Particular requirements and tests for separating transformers and power supply units incorporating separating
KS C IEC 61558-1-2022 Safety of transformers, reactors, power supply units and combinations thereof — Part 1: General requirements and tests
KS C IEC 61558-2-6-2022 Safety of transformers, reactors, power supply units and combinations thereof — Part 2-6: Particular requirements and tests for safety isolating transformers and power supply units incorporating safet
KS C IEC 61558-1-2017 Safety of power transformers, power supply units and similar－Part 1：General requirements and tests
KS C IEC 60512-2-3-2008 Connectors for electronic equipment－Tests and measurements－Part 2-3：Electrical continuity and contact resistance tests－Test 2c：Contact resistance variation

Japanese Industrial Standards Committee (JISC)

JIS C 1731-2:1998 Instrument transformers for testing purpose and used with general instrument Part 2: Voltage transformers
JIS C 1731-1:1998 Instrument transformers for testing purpose and used with general instrument Part 1: Current transformers
JIS C 1216:1995 Alternating-current watt-hour meters (for connection through instrument transformer)
JIS C 1216-1:2009 Alternating-current watt-hour meters (for connection through instrument transformer) -- Part 1: General measuring instrument
JIS C 5402-16-7:2012 Connectors for electronic equipment -- Tests and measurements -- Part 16-7: Mechanical tests on contacts and terminations -- Test 16g: Measurement of contact deformation after crimping
JIS C 5402-16-6:2014 Connectors for electronic equipment -- Tests and measurements -- Part 16-6: Mechanical tests on contacts and terminations -- Test 16f: Robustness of terminations
JIS C 1263-2:2017 Electromechanical var-hour meters -- Part 2: Measuring instruments used in transaction or certification for connection through transformer
JIS C 5311:1994 Testing methods of power transformers for electronic equipment
JIS C 61558-1:2008 Safety of power transformers, power supplies, reactors and similar products -- Part 1: General requirements and tests
JIS C 61558-1:2019 Safety of transformers, reactors, power supply units and combinations thereof -- Part 1: General requirements and tests
JIS E 5011-1:2009 Rolling stock -- Combined testing of power convertor with ac motors -- Part 1: Inverter system
JIS E 5011-2:2009 Rolling stock -- Combined testing of power convertor with ac motors -- Part 2: Convertor-inverter system with intermediate dc link
JIS C 5321:1997 Methods of test for high frequency inductors and intermediate frequency transformers for electronic equipment
JIS C 5402-1-3:2002 Connectors for electronic equipment -- Tests and measurements -- Part 1-3: General examination -- Test 1c: Electrical engagement length
JIS C 61558-2-1:2012 Safety of power transformers, power supplies, reactors and similar products -- Part 2-1: Particular requirements and tests for separating transformers and power supplies incorporating separating transformers for general applications
JIS C 5402-4-1:2005 Connectors for electronic equipment -- Tests and measurements -- Part 4-1: Voltage stress tests -- Test 4a: Voltage proof

International Organization for Standardization (ISO)

ISO 5826:1983 Transformers for resistance welding machines — General specifications applicable to all transformers
ISO/OECD 789-10:2006 Agricultural tractors - Test procedures - Part 10: Hydraulic power at tractor/implement interface

ZA-SANS

SANS 5826:2004 Resistance welding equipment - Transformers - General specifications applicable to all transformers
SANS 60076-4:2004 Power transformers Part 4: Guide to the lightning impulse and switching impulse testing - Power transformers and reactors
SANS 61558-1:2006 Safety of power transformers, power supplies, reactors and similar products Part 1: General requirements and tests
SANS 60470:2008 High-voltage alternating current contactors and contactor-based motor-starters
SANS 61558-2-1:2007 Safety of power transformers, power supplies, reactors and similar products Part 2-1: Particular requirements and tests for separating transformers and power supplies incorporating separating transformers for general applications
SANS 61558-2-2:2007 Safety of power transformers, power supplies, reactors and similar products Part 2-2: Particular requirements and tests for control transformers and power supplies incorporating control transformers

SCC

CEI EN IEC 61558-1:2021 Safety of transformers, reactors, power units and their combinations Part 1: General requirements and tests
AS 3108.1:1984 Approval and test specification - Isolating transformers and safety isolating transformers - General requirements
MIL MIL-W-80024D-1985 WELDING MACHINE, ARC, AC, TRANSFORMER, CONSTANT CURRENT (SUPERSEDING MIL-W-80024C) (S/S BY A-A-59148)
AS 3195:1986 Approval and test specification - Portable electric arc welding machines - Transformer type
AS 3195:1982 Approval and test specification for portable electric arc welding machines - Transformer type
AS 3195:1975 Approval and test specification for portable electric arc welding machines - Transformer type
AS 1029.1:1982 Low voltage contactors - Electromechanical (up to and including 1000 V a.c.)
IEC 60292-1A:1971 First supplement - Low-voltage motor staters: Part1: Direct-on-line (full voltage) a.c. starters
CSA IEC 61558-2-1020 Safety of power transformers, power supplies, reactors and similar products — Part 2-1: Particular requirements and tests for separating transformers and power supplies incorporating separating transformers for general applications
CEI EN 61558-2-23:2012 Safety of transformers, reactors, power supply units and combinations thereof Part 2-23: Particular requirements and tests for transformers and power supply units for construction sites
DANSK DS/EN 61558-2-23:2011 Safety of transformers, reactors, power supply units and combinations thereof - Part 2-23: Particular requirements and tests for transformers and power supply units for construction sites
AS 2232.1:1979 High voltage motor starters - Direct-on-line (full voltage) a.c. starters
BS 4941-4:1977 Specification for motor starters for voltages up to and including 1000 V a.c. and 1200 V d.c.-Reduced voltage a.c. starters, two-step auto-transformer starters
05/30140266 DC IEC 60512-16-7. Connectors for electronic equipment. Tests and measurements. Part 16-7. Mechanical tests on contacts and terminations. Test 16g. Measurement of contact deformation after crimping
CEI EN 61558-2-14:2015 Safety of transformers, reactors, power supply units and combinations thereof Part 2-14: Particular requirements and test for variable transformers and power supply units incorporating variable transformers
DANSK DS/EN 61558-2-14:2013 Safety of transformers, reactors, power supply units and combination thereof - Part 2-14: Particular requirements and tests for variable transformers and power supply units incorporating variable transformers
IEC 60292-4:1975 Low-voltage motor starters: Part 4: Reduced voltage a.c. starters. Two-step auto-transformer starters
UNE-EN 60470:2001 High-voltage alternating current contactors and contactor-based motor starters.
MIL MIL-W-80232B-1987 WELDING MACHINE, ARC, AC/DC, TRANSFORMER RECTIFIER, CONSTANT CURRENT, PROGRAMMED (SUPERSEDING MIL-W-80232A) (NO S/S DOCUMENT)
AENOR UNE-EN 61558-1/A1:2007 Safety of power transformers, power supplies, reactors and similar products - Part 1: General requirements and tests
AENOR UNE-EN 61558-1:2007 Safety of power transformers, power supplies, reactors and similar products - Part 1: General requirements and tests
DANSK DS/EN 61558-1:2006 Safety of power transformers, power supplies, reactors and similar products – Part 1: General requirements and tests
DANSK DS/EN 61558-2-2:2007 Safety of power transformers, power supplies, reactors and similar products - Part 2-2: Particular requirements and tests for control transformers and power supplies incorporating control transformers
CEI EN 61558-2-2:2007 Safety of power transformers, power supplies, reactors and similar products - Part 2-2: Particular requirements and tests for control transformers and power supplies incorporating control transformers
CSA IEC 61558-2-2020 Safety of power transformers, power supplies, reactors and similar products — Part 2-2: Particular requirements and tests for control transformers and power supplies incorporating control transformers
AS 1202.1:1972 A.C. motor starters (full voltage - up to and including 1000 V) - Direct-on-line (full voltage) starters
AS 2732:1984 Guide to the lightning impulse and switching impulse testing of power transformers and reactors
DIN EN 60470:2002 High-voltage alternating current contactors and contactor-based motor-starters (IEC 60470:2000); German version EN 60470:2000 + Corrigendum June 2000
AS 2374.3:1982 Power transformers, Part 3: Insulation levels and dielectric tests
DANSK DS/EN 61558-2-1:2007 Safety of power transformers, power supplies, reactors and similar products - Part 2-1: Particular requirements and tests for separating transformers and power supplies incorporating separating transformers for general applications
AS 1202:1972 Direct-on-line a.c. motor starters (full voltage - up to and including 1000 V)
DANSK DS/EN 61558-2-12:2011 Safety of transformers, reactors, power supply units and combinations thereof - Part 2-12: Particular requirements and tests for constant voltage transformers and power supply units for constant voltage
CEI EN 61558-2-12:2012 Safety of transformers, reactors, power supply units and combinations thereof Part 2-12: Particular requirements and tests for constant voltage transformers and power supply units for constant voltage
CEI EN 61558-2-1:2007 Safety of power transformers, power supplies, reactors and similar products - Part 2-1: Particular requirements and tests for separating transformers and power supplies incorporating separating transformers for general applications
IEC 60292-1:1969 Low-voltage motor staters: Part1: Direct-on-line (full voltage) a.c. starters
DIN EN 60076-4 E:2023 Draft Document - Power transformers - Part 4: Guide to the lightning impulse and switching impulse testing - Power transformers and reactors (IEC 14/1060/CD:2020); Text in German and English
CEI EN 61558-2-7:2008 Safety of power transformers, power supplies, reactors and similar products Part 2-7: Particular requirements and tests for transformers for toys
AS 3208:1981 Approval and test specification for Transformers in electromedical equipment
CSA IEC 61558-2-4020 Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V — Part 2-4: Particular requirements and tests for isolating transformers and power supply units incorporating isolating transformers
CEI EN 61558-2-4:2010 Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V Part 2-4: Particular requirements and tests for isolating transformers and power supply units incorporating isolating transformers
AENOR UNE-EN 61558-2-13:2010 Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V — Part 2-13: Particular requirements and tests for auto transformers and power supply units incorporating auto transformers

Association Francaise de Normalisation

NF C52-558-2-14*NF EN 61558-2-14:2013 Safety of transformers, reactors, power supply units and combinations thereof - Part 2-14 : particular requirements and tests for variable transofrmers and power supply units incorporating variable transformers
NF A82-040:1985 Electric resistance welding. Transformers for resistance welding machines. General specifications applicable to all transformers.
NF F66-310:2000 Railway applications - Traction transformers and inductors on rolling stock.
NF C93-400-16-7*NF EN 60512-16-7:2008 Connectors for electronic equipment - Tests and measurements - Part 16-7 : mechanical tests on contacts and terminations - Test 16g : measurement of contact deformation after crimping
NF C52-558-2-1*NF EN 61558-2-1:2007 Safety of power transformers, power supplies, reactors and similar products - Part 2-1 : particular requirements and tests for separating transformers and power supplies incorporating separating transformers for general applications
NF EN 61558-2-23:2011 Safety of transformers, reactors, power supplies and combinations thereof - Part 2-23: special rules and tests for transformers and power supplies for construction sites
NF EN 60076-4:2002 Power transformers - Part 4: guide to lightning impulse and switching impulse tests - Power transformers and inductance coils
NF F42-327/A1*NF EN 50327/A1:2005 Railway applications - Fixed installations - Harmonisation of the rated values for converter groups and tests on converter groups
NF F42-327*NF EN 50327:2005 Railway applications - Fixed installations - Harmonisation of the rated values for converter groups and tests on converter groups
NF C93-355:1968 Components for electronic equipment. Intermediate frequency transformers used in broadcast receivers.
NF C52-176-4*NF EN 60076-4:2002 Power transformers - Part 4 : guide to lightning impulse and switching impulse testing - Power transformers and reactors
NF C52-558-2-2*NF EN 61558-2-2:2007 Safety of power transformers, power supplies, reactors and similar products - Part 2-2 : particular requirements and tests for control transformers and power supplies incorporating control transformers
NF U10-209:1997 AGRICULTURAL TRACTORS. TEST PROCEDURES. PART 10 : HYDRAULIC POWER AT TRACTOR/IMPLEMENT INTERFACE.
NF EN 61558-2-2:2007 Safety of transformers, power supplies, inductance coils and similar products - Part 2-2: special rules and tests for control transformers and power supplies incorporating control transformers
NF F65-377-3:2003 Railway applications - Rolling stock - Part 3 : combined testing of alternating current motors, fed by an indirect convertor, and their control system.
NF C52-558-2-9*NF EN 61558-2-9:2011 Safety of transformers, reactors, power supply units and combinations thereof - Part 2-9 : particular requirements and tests for transformers and power supply units for class III handlamps for tungsten filament lamps.
NF C52-558-1/A1*NF EN 61558-1/A1:2009 Safety of power transformers, power supplies, reactors and similar products - Part 1 : general requirements and tests
NF A82-042:2010 Resistance welding - Transformers to be embarked on a robot - Particular specifications.
NF F65-377-1:2006 Railway applications - Rolling stock - Part 1 : combined testing of inverter-fed alternating current motors and their control.
NF C63-110/A1:1995 Low Voltage Equipment Part 4: Contactors and Motor Starters Section 1: Contactors and Electromechanical Starters
NF C63-110/A2:1997 Low Voltage Equipment Part 4: Contactors and Motor Starters Section 1: Contactors and Electromechanical Starters
NF EN 50588-2:2018 Medium power 50 Hz transformers, of highest voltage for equipment not exceeding 36 kV Part 2: transformers connected by cable boxes on the high voltage side and/or low voltage side - General requirements for...
NF C52-558-1/A1:2005 Safety of power transformers, power supply units and similar - Part 1 : general requirements and tests.
NF R16-339:1990 Inlet air cleaning equipment for internal combustion engines and compressors. Performance testing.
NF C52-558-2-4*NF EN 61558-2-4:2009 Safety of transformers, reactors, power supply units and similar products for voltages up to 1 100 V - Part 2-4 : particular requirements and tests for isolating transformers and power supply units incorporating isolating transformers
NF C93-400-16-4*NF EN 60512-16-4:2008 Connectors for electronic equipment - Tests and measurements - Part 16-4 : mechanical tests on contacts and terminations - Test 16d : tensile strength (crimped connections).
NF C52-558-2-23*NF EN 61558-2-23:2011 Safety of transformers, reactors, power supply units and combinations thereof - Part 2-23 : particular requirements and tests for transformers and power supply units for construction sites

International Electrotechnical Commission (IEC)

IEC 61558-2-23:2010 Safety of transformers, reactors, power supply units and combinations thereof - Part 2-23: Particular requirements and tests for transformers and power supply units for construction sites
IEC 61558-2-14:2012 Safety of transformers, reactors, power supply units and combinations thereof - Part 2-14: Particular requirements and test for variable transformers and power supply units incorporating variable transformers
IEC 61558-2-8:2010 Safety of transformers, reactors, power supply units and combinations therof - Part 2-8: Particular requirements and tests for transformers and power supply units for bells and chimes
IEC 60512-16-7:2008 Connectors for electronic equipment - Tests and measurements - Part 16-7: Mechanical tests on contacts and terminations - Test 16g: Measurement of contact deformation after crimping
IEC 61558-2-4:2021 Safety of transformers, reactors, power supply units and combinations thereof - Part 2-4: Particular requirements and tests for isolating transformers and power supply units incorporating isolating tr
IEC 61558-2-4:2021 RLV Safety of transformers, reactors, power supply units and combinations thereof - Part 2-4: Particular requirements and tests for isolating transformers and power supply units incorporating isolating tr
IEC 61558-2-1:2007 Safety of power transformers, power supplies, reactors and similar products - Part 2-1: Particular requirements and tests for separating transformers and power supplies incorporating separating transformers for general applications
IEC 61377:1996 Electric traction - Rolling stock - Combined testing of inverter-fed alternating current motors and their control
IEC 60076-4:2002 Power transformers - Part 4: Guide to the lightning impulse and switching impulse testing; Power transformers and reactors
IEC 60470:2000 High-voltage alternating current contactors and contactor-based motor-starters
IEC 61558-1:2005+AMD1:2009 CSV Safety of power transformers, power supplies, reactors and similar products - Part 1: General requirements and tests
IEC 61558-2-14:2022 RLV Safety of transformers, reactors, power supply units and combinations thereof - Part 2-14: Particular requirements and tests for variable transformers and power supply units incorporating variable tra
IEC 61558-2-14:2022 Safety of transformers, reactors, power supply units and combinations thereof - Part 2-14: Particular requirements and tests for variable transformers and power supply units incorporating variable tra
IEC 61558-2-12:2011 Safety of transformers, reactors, power supply units and combinations therof - Part 2-12: Particular requirements and tests for constant voltage transformers and power supply units for constant voltage
IEC 61558-1:2017 RLV Safety of transformers, reactors, power supply units and combinations thereof - Part 1: General requirements and tests
IEC 60470:1999 High-voltage alternating current contactors and contactor-based motor-starters
IEC 61377-1:2006 Railway applications - Rolling stock - Part 1: Combined testing of inverter-fed alternating current motors and their control system
IEC 61558-1:2005/COR3:2011 Safety of power transformers, power supplies, reactors and similar products - Part 1: General requirements and tests
IEC 61558-2-6:2021 RLV Safety of transformers, reactors, power supply units and combinations thereof - Part 2-6: Particular requirements and tests for safety isolating transformers and power supply units incorporating safet
IEC 61558-1:2009 Safety of power transformers, power supplies, reactors and similar products - Part 1: General requirements and tests
IEC 61558-2-2:2007 Safety of power transformers, power supplies, reactors and similar products - Part 2-2: Particular requirements and tests for control transformers and power supplies incorporationg control transformers
IEC 61558-1:2017 Safety of transformers, reactors, power supply units and combinations thereof - Part 1: General requirements and tests
IEC 61558-2-9:2010 Safety of transformers, reactors, power supply units and combinations thereof - Part 2-9: Particular requirements and tests for transformers and power supply units for class III handlamps for tungsten filament lamps
IEC 61558-1:2005 Safety of power transformers, power supplies, reactors and similar products - Part 1: General requirements and tests
IEC 61558-2-5:2010 Safety of transformers, reactors, power supply units and combinations thereof - Part 2-5: Particular requirements and tests for transformators for shavers, power supply units for shavers and shaver supply units
IEC 61558-2-2:2022 RLV Safety of transformers, reactors, power supply units and combinations thereof - Part 2-2: Particular requirements and tests for control transformers and power supply units incorporating control transf
IEC 61558-2-2:2022 EXV Safety of transformers, reactors, power supply units and combinations thereof - Part 2-2: Particular requirements and tests for control transformers and power supply units incorporating control transf
IEC 61558-1:1997 Safety of power transformers, power supply units and similar - Part 1: General requirements and tests
IEC 60722:1982 Guide to the lightning impulse and switching impulse testing of power transformers and reactors
IEC 61558-1:1998 Safety of power transformers, power supply units and similar - Part 1: General requirements and tests
IEC 61558-2-2:2022 Safety of transformers, reactors, power supply units and combinations thereof - Part 2-2: Particular requirements and tests for control transformers and power supply units incorporating control transf
IEC 61558-1:2005/COR1:2008 Safety of power transformers, power supplies, reactors and similar products - Part 1: General requirements and tests; Corrigendum 1
IEC 61558-2-4:2009 Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1100 V - Part 2-4: Particular requirements and tests for isolating transformers and power supply units incorporating isolating transformers

RO-ASRO

STAS 10942-1984 TRANSFORMERS FOR RESISTANCE WELDING MACHINES General technical requirements
STAS 7314-1980 RHEOSTATIG ROTOR STARTERS FOR LOW VOLTAGE MOTORS General leehnical requirements for quality
STAS 11119-1978 COMBINED-VOLTAGES TEST OF SELF-RESTORING INSULATION. General requirements

Standard Association of Australia （SAA）

AS 2374.3.0:1982 Power transformers - Insulation levels and dielectric tests - General requirements
AS 60076.4:2006 Power transformers - Guide to the lightning impulse and switching impulse testing - Power transformers and reactors
AS/NZS 4879.1:2008 Performance of transformers and electronic step-down convertors for ELV lamps - Test method - Energy performance
AS 60470:2001(R2015) High voltage AC contactors and contactor based motor starters
AS/NZS 61558.1:2000 Safety of power transformers, power supply units and similar - General requirements and tests
AS/NZS 61558.2.4:2022 Safety of transformers, reactors, power supply units and combinations thereof, Part 2.4: Particular requirements and tests for isolating transformers and power supply units incorporating isolating transformers for general applications

Institute of Electrical and Electronics Engineers (IEEE)

IEEE Std C57.12.90-1993 Test code for liquid-immersed distribution, power, and regulating transformers and guide for short-circuit testing of distribution and power transformers
IEEE Std C57.116-2014 IEEE Guide for Transformers Directly Connected to Generators
IEEE Std C57.116-2022 IEEE Guide for Transformers Directly Connected to Generators
IEEE Std C57.12.91-2011 Test Code for Dry-Type Distribution and Power Transformers
IEEE Std C57.12.91-1995 Test code for dry-type distribution and power transformers
IEEE Std C57.12.91-1979 Test code for dry-type distribution and power transformers
IEEE Std C57.107-2024 IEEE Recommended Practice for Developing Short-Term Overexcitation V/Hz Curves for Transformers Directly Connected to Generators
IEEE Std C57.13.1-1981 Guide for Field Testing of Relaying Current Transformers
IEEE Std C57.12.90-2006 Test code for liquid-immersed distribution, power, and regulating transformers
IEEE Std C57.12.90-1999 Test code for liquid-immersed distribution, power, and regulating transformers
IEEE PC57.116/D3, March 2022 IEEE Draft Guide for Transformers Directly Connected to Generators
IEEE Std C57.12.90-2015 Test Code for Liquid-Immersed Distribution@ Power@ and Regulating Transformers
IEEE PC57.116/D4, September 2022 IEEE Draft Guide for Transformers Directly Connected to Generators
IEEE PC57.116/D3.0, July 2013 IEEE Draft Guide for Transformers Directly Connected to Generators
IEEE PC57.116/D3.1, December 2013 IEEE Draft Guide for Transformers Directly Connected to Generators
IEEE PC57.107 IEEE Draft Recommended Practice for Developing Short-Term Over excitation V/Hz Curves for Transformers Directly Connected to Generators
IEEE PC37.107/D4. November 2023 IEEE Draft Recommended Practice for Developing Short-Term Over excitation V/Hz Curves for Transformers Directly Connected to Generators
IEEE PC57.107/D5, January 2024 IEEE Draft Recommended Practice for Developing Short-Term Over excitation V/Hz Curves for Transformers Directly Connected to Generators
IEEE PC57.107/D3, July 2023 IEEE Draft Recommended Practice for Developing Short-Term Over excitation V/Hz Curves for Transformers Directly Connected to Generators
IEEE Std C57.129-2007 General requirements and test code for oil-immersed HVDC converter transformers
IEEE Std C57.100-1986 Test procedure for thermal evaluation of oil-immersed distribution transformers
IEEE PC57.116/D5, October 2022 IEEE Approved Draft Guide for Transformers Directly Connected to Generators
IEEE 469-1988 Recommended practice for voice-frequency electrical-noise test of distribution transformers
IEEE Std C57.12.90/INT 1-2009 Test Code for Liquid-Immersed Distribution, Power, and Regulating Transformers
IEEE Std C37.09b-2010 Test procedure for AC high-voltage circuit breakers rated on a symmetrical current basis - Amendment 2: To change the description of transient recovery voltage for harmonization with IEC 62271-100

European Committee for Electrotechnical Standardization（CENELEC）

EN 61558-2-23:2010 Safety of transformers, reactors, power supply units and combinations thereof - Part 2-23: Particular requirements and tests for transformers and power supply units for construction sites
EN 60512-16-7:2008 Connectors for electronic equipment - Tests and measurements - Part 16-7: Mechanical tests on contacts and terminations - Test 16g: Measurement of contact deformation after crimping
EN 61558-2-1:2007 Safety of power transformers, power supplies, reactors and similar products - Part 2-1: Particular requirements and tests for separating transformers and power supplies incorporating separating transformers for general applications (Remains Current)
EN 61558-2-14:2013 Safety of transformers, reactors, power supply units and combination thereof - Part 2-14: Particular requirements and tests for variable transformers and power supply units incorporating variable transformers
EN 61558-1:1997 Safety of Power Transformers, Power Supply Units and Similar - Part 1: General Requirements and Tests (Incorporates Amendments A1: 2002 and A11: 2003; Remains Current)
EN 61558-2-8:2010 Safety of transformers, reactors, power supply units and combinations thereof - Part 2-8: Particular requirements and tests for transformers and power supply units for bells and chimes
EN 60076-4:2002 Power Transformers - Part 4: Guide to the Lightning Impulse and Switching Impulse Testing - Power Transformers and Reactors
EN 61558-2-4:2009 Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-4: Particular requirements and tests for isolating transformers and power supply units incorporating isolating transformers
EN 61558-2-13:2009 Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-13: Particular requirements and tests for auto transformers and power supply units incorporating auto transformers

CENELEC - European Committee for Electrotechnical Standardization

EN 61558-2-23:2000 Safety of Power Transformers@ Power Supply Units and Similar Devices Part 2-23: Particular Requirements for Transformers for Construction Sites
EN 60470:2000 High-Voltage Alternating Current Contactors and Contactor-Based Motor Starters
EN 61558-2-1:1997 Safety of Power Transformers@ Power Supply Units and Similar Part 2-1: Particular Requirements for Separating Transformers for General Use
EN 61558-2-8:1998 Safety of Small Power Transformers@ Power Supply Units and Similar Part 2-8: Particular Requirements for Bell and Chime Transformers
EN 61558-2-2:1998 Safety of Power Transformers@ Power Supply Units and Similar Part 2.2: Particular Requirements for Control Transformers
EN 61558-2-4:1997 Safety of Power Transformers@ Power Supply Units and Similar Part 2-4: Particular Requirements for Isolating Transformers for General Use
EN 61558-2-13:2000 Safety of Power Transformers@ Power Supply Units and Similar Devices Part 2-13: Particular Requirements for Auto-Transformers for General Use

United States Navy

NAVY QPL-85071-3-1995 INVERTERS, AIRCRAFT, DC TO AC, GENERAL SPECIFICATION FOR
NAVY QPL-85071-4 NOTICE 1-1999 INVERTERS, AIRCRAFT, DC TO AC, GENERAL SPECIFICATION FOR

Danish Standards Foundation

DS/ISO 5826:1984 Transformers for resistance welding machines. General specifications applicable to all transformers
DS/EN 60470+Corr.:2002 High-voltage alternating current contactors and contactor-based motor starters
DS/EN 60076-4:2002 Power transformers - Part 4: Guide to lightning impulse and switching impulse testing - Power transformers and reactors
DS/EN 61558-2-14:2013 Safety of transformers, reactors, power supply units and combination thereof - Part 2-14: Particular requirements and tests for variable transformers and power supply units incorporating variable transformers
DS/EN 61558-2-23:2011 Safety of transformers, reactors, power supply units and combinations thereof - Part 2-23: Particular requirements and tests for transformers and power supply units for construction sites
DS/IEC 292-1B:1982 Low-voltage motor starters - Part 1: Direct-on-line (Ful l voltage) a.c. starters
DS/EN 61558-2-1:2007 Safety of power transformers, power supplies, reactors and similar products - Part 2-1: Particular requirements and tests for separating transformers and power supplies incorporating separating transformers for general applications
DS/EN 61558-2-12:2011 Safety of transformers, reactors, power supply units and combinations thereof - Part 2-12: Particular requirements and tests for constant voltage transformers and power supply units for constant voltage
DS/EN 61046:1995 D.C. or a.c. supplied electronic step-down convertors for filament lamps - General and safety requirements

ES-UNE

IEEE C57.116-2022 IEEE Guide for Transformers Directly Connected to Generators
UNE-EN IEC 61238-1-3:2020/A11:2020 Compression and mechanical connectors for power cables - Part 1-3: Test methods and requirements for compression and mechanical connectors for power cables for rated voltages above 1 kV (Um = 1,2 kV) up to 36 kV (Um = 42 kV) tested on non-insulated co...
UNE-EN IEC 61238-1-3:2020 Compression and mechanical connectors for power cables - Part 1-3: Test methods and requirements for compression and mechanical connectors for power cables for rated voltages above 1 kV (Um = 1,2 kV) up to 36 kV (Um = 42 kV) tested on non-insulated co...

ECIA - Electronic Components Industry Association

RS-364-07A-1983 TP-07A Crimp Contact Deformation Test Procedure for Electrical Connectors
364-39A-1985 TP-39A Hydrostatic Test Procedure for Electrical Connectors

IEEE - The Institute of Electrical and Electronics Engineers@ Inc.

IEEE C57.12.37-2015 The Electronic Reporting of Distribution Transformer Test Data
IEEE C57.12.37-2006 The Electronic Reporting of Distribution Transformer Test Data
IEEE C57.100-2011 Test Procedure for Thermal Evaluation of Insulation Systems for Liquid-Immersed Distribution and Power Transformers
IEEE C57.138-1998 Recommended Practice for Routine Impulse Test for Distribution Transformers
IEEE C57.129-2007 General Requirements and Test Code for Oil-Immersed HVDC Converter Transformers
IEEE C57.138-2016 Recommended Practice for Routine Impulse Tests for Distribution Transformers

TR-TSE

TS 3092-1978 LOW - VOLTAGE MOTOR STARTERS DIRECT - ON - LINE (FULL VOLTAGE) A. C. STARTERS
TS 2153-1975 BASIC ENV?RONMENTAL TESTING PROCEDURES FOR ELECTRONIC COMPONENTS AND ELECTRONIC EQUIPMENT TEST Db : DAMP HEAT (12 + 12—HOUR CYCLE)

SAE - SAE International

SAE J56-1978 Electrical Generating System (Alternator Type) Performance Curve and Test Procedure
SAE J56-1983 Electrical Generating System (Alternator Type) Performance Curve and Test Procedure (June 1983)

Defense Logistics Agency

DLA A-A-59148-1998 WELDING MACHINE, ARC, AC/DC INVERTER, CONSTANT CURRENT
DLA A-A-59148 VALID NOTICE 1-2002 WELDING MACHINE, ARC, AC/DC INVERTER, CONSTANT CURRENT
DLA QPL-27535-11-2006 TRANSFORMER, POWER, ISOLATION: SERIES CIRCUIT, AIRPORT LIGHTING, GENERAL SPECIFICATION FOR
DLA MIL-T-27535 A NOTICE 3-1999 TRANSFORMER, POWER, ISOLATION, SERIES CIRCUIT, AIRPORT LIGHTING, GENERAL SPECIFICATION FOR
DLA MIL-T-27535 A (2)-1965 TRANSFORMER, POWER, ISOLATION, SERIES CIRCUIT, AIRPORT LIGHTING, GENERAL SPECIFICATION FOR
DLA MIL-T-27535 A SUPP 1A-1964 TRANSFORMER, POWER, ISOLATION, SERIES CIRCUIT, AIRPORT LIGHTING, GENERAL SPECIFICATION FOR
DLA MS27134 REV B NOTICE 1-1999 TRANSFORMER, POWER, ISOLATION; AIRPORT LIGHTING 300W/6.6A/6.6A/5000V, GENERAL SPECIFICATION FOR
DLA MIL-T-27535 A-1964 TRANSFORMER, POWER, ISOLATION, SERIES CIRCUIT, AIRPORT LIGHTING, GENERAL SPECIFICATION FOR
DLA MIL-T-27535 A VALID NOTICE 2-1993 TRANSFORMER, POWER, ISOLATION, SERIES CIRCUIT, AIRPORT LIGHTING, GENERAL SPECIFICATION FOR
DLA MS27134 REV B-1990 TRANSFORMER, POWER, ISOLATION; AIRPORT LIGHTING 300W/6.6A/6.6A/5000V, GENERAL SPECIFICATION FOR
DLA MS27134 REV B VALID NOTICE 2-2004 TRANSFORMER, POWER, ISOLATION; AIRPORT LIGHTING 300W/6.6A/6.6A/5000V, GENERAL SPECIFICATION FOR

CH-SNV

SNV 27510.2-1951 DC Arc Welding Generators and Transformers Rules

NZS

AS/NZS 61558.2.23:2011 (Includes IEC text) Safety of transformers, reactors, power supply units and combinations thereof - Part 2.23: Particular requirements and tests for transformers and power supply units for construction sites
AS/NZS 61558.2.23:2011 (Excludes IEC text) Safety of transformers, reactors, power supply units and combinations thereof - Part 2.23: Particular requirements and tests for transformers and power supply units for construction sites
AS/NZS 61558.2.4:2022 (Excludes IEC Text) Safety of transformers, reactors, power supply units and combinations thereof – Part 2.4: Particular requirements and tests for isolating transformers and power supply units incorporating isolating transformers for general applications
AS/NZS 61558.2.4:2022 (Includes IEC Text) Safety of transformers, reactors, power supply units and combinations thereof – Part 2.4: Particular requirements and tests for isolating transformers and power supply units incorporating isolating transformers for general applications

Electronic Components, Assemblies and Materials Association

ECA 183-1957 Output Transformers for Radio Broadcast Receivers
ECA EIA-364-04A-2002 TP-04A Normal Force Test Procedure for Electrical Connectors

YU-JUS

JUS N.R4.465-1980 Elektromechanical components for electronic equipment. Test methods. Test 16 g: Measurement of contact deformation after crimping
JUS N.H1.013-1985 Power transformers. Insulation levek and dielectric tests

CN-QIYE

Q/GDW 11071.1-2013 110 (66) kV~750kV smart substation general primary equipment technical requirements and interface specifications Part 1: Transformers

German Institute for Standardization

DIN EN 61558-2-1:2007 Safety of power transformers, power supplies, reactors and similar products - Part 2-1: Particular requirements and tests for separating transformers and power supplies incorporating separating transformers for general applications (IEC 61558-2-1:2007); G
DIN EN 60512-16-7:2009 Connectors for electronic equipment - Tests and measurements - Part 16-7: Mechanical tests on contacts and terminations - Test 16g: Measurement of contact deformation after crimping (IEC 60512-16-7:2008); German version EN 60512-16-7:2008
DIN EN 60076-4:2003 Power transformers - Part 4: Guide to lightning impulse and switching impulse testing; Power transformers and reactors (IEC 60076-4:2002); German version EN 60076-4:2002
DIN 42500-21:1995 Three phase oil-immersed distribution transformers 50 Hz, from 50 to 2500 kVA with highest voltage for equipment not exceeding 36 kV - Part 2: Distribution transformers with cable boxes on the high voltage and/or low voltage side; section 1: General requi
DIN EN 61558-2-13:2009 Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1100 V - Part 2-13: Particular requirements and tests for auto transformers and power supply units incorporating auto transformers (IEC 61558-2-13:2009); G
DIN EN 61558-2-14:2013 Safety of transformers, reactors, power supply units and combination thereof - Part 2-14: Particular requirements and tests for variable transformers and power supply units incorporating variable transformers (IEC 61558-2-14:2012); German version EN 61558
DIN EN 61558-2-2:2007 Safety of power transformers, power supplies, reactors and similar products - Part 2-2: Particular requirements and tests for control transformers and power supplies incorporating control transformers (IEC 61558-2-2:2007); German version EN 61558-2-2:2007
DIN EN 61558-1:1998 Safety of power transformers, power supply units and similar - Part 1: General requirements and tests (IEC 61558-1:1997, modified); German version EN 61558-1:1997

GSO

BH GSO IEC 61558-2-23:2016 Safety of transformers, reactors, power supply units and combinations thereof - Part 2-23: Particular requirements and tests for transformers and power supply units for construction sites
BH GSO IEC 60588-5:2016 Askarels for transformers and capacitors. Part 5: Screening test for compatibility of materials and transformer askarels
OS GSO IEC 61558-1:2010 Safety of power transformers, power supplies, reactors and similar products - Part 1: General requirements and tests
GSO IEC 61558-1:2010 Safety of power transformers, power supplies, reactors and similar products - Part 1: General requirements and tests
OS GSO IEC 61558-2-2:2008 Safety of power transformers, power supplies, reactors and similar products - Part 2-2: Particular requirements and tests for control transformers and power supplies incorporating control transformers
GSO IEC 61558-2-2:2008 Safety of power transformers, power supplies, reactors and similar products - Part 2-2: Particular requirements and tests for control transformers and power supplies incorporating control transformers

AENOR

UNE 207019:2009 IN Template of routine test protocol for MV/LV distribution transformers
UNE-EN 60076-4:2005 Power transformers -- Part 4: Guide to the lightning impulse and switching impulse testing - Power transformers and reactors
UNE-EN 61558-2-14:2013 Safety of transformers, reactors, power supply units and combination thereof - Part 2-14: Particular requirements and tests for variable transformers and power supply units incorporating variable transformers
UNE-EN 61558-2-23:2011 Safety of transformers, reactors, power supply units and combinations thereof - Part 2-23: Particular requirements and tests for transformers and power supply units for construction sites
UNE-EN 61558-1:2007/A1:2009 Safety of power transformers, power supplies, reactors and similar products -- Part 1: General requirements and tests
UNE-EN 61558-2-12:2011 Safety of transformers, reactors, power supply units and combinations thereof -- Part 2-12: Particular requirements and tests for constant voltage transformers and power supply units for constant voltage
UNE-EN 61558-2-13:2010 Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V -- Part 2-13: Particular requirements and tests for auto transformers and power supply units incorporating auto transformers
UNE-EN 61558-2-4:2010 Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V -- Part 2-4: Particular requirements and tests for isolating transformers and power supply units incorporating isolating transformers

Indonesia Standards

SNI IEC 60076-4:2011 Power Transformers Part 4: Guidelines for Lightning Impulse and Switching Impulse Testing Power Transformers and Reactors

European Committee for Standardization (CEN)

HD 398.3 S1-1986 Power transformers; insulation levels and dielectric tests

NL-NEN

NEN 2763-1986 Power transformers Insulation levels and dielectric tests

VDE - VDE Verlag GmbH@ Berlin@ Germany

VDE 0570-2-1-2007 Safety of power transformers@ power supplies@ reactors and similar products - Part 2-1: Particular requirements and tests for separating transformers and power supplies incorporating separating transformers for general applications (IEC 61558-2-1:2007); G
VDE 0532-76-4-2003 Power transformers - Part 4: Guide to lightning impulse and switching impulse testing; Power transformers and reactors (IEC 60076-4:2002); German version EN 60076-4:2002
VDE 0570-1 BERICHTIGUNG 1-2008 Safety of power transformers@ power supplies@ reactors and similar products - Part 1: General requirements and tests - (IEC 61558-1:2005); German version EN 61558-1:2005@ Corrigendum to DIN EN 61558-1 (VDE 0570-1):2006-07
VDE 0570-1 BERICHTIGUNG 2-2008 Safety of power transformers@ power supplies@ reactors and similar products - Part 1: General requirements and tests (IEC 61558-1:2005); German version EN 61558-1:2005@ Corrigenda to DIN EN 61558-1 (VDE 0570-1):2006-07; German version CENELEC-Cor. :2006 t
VDE 0570-1-2006 Safety of power transformers@ power supplies@ reactors and similar products - Part 1: General requirements and tests (IEC 61558-1:2005); German version EN 61558-1:2005

ES-AENOR

UNE 20-101 Pt.3-1987 Power transformer. Isolation level and non-conductive tests
UNE 23-728-1990 Fire reaction test of building materials. Caliber of electric burner

Lithuanian Standards Office

LST EN 60076-4-2003 Power transformers. Part 4: Guide to the lightning impulse and switching impulse testing. Power transformers and reactors (IEC 60076-4:2002)
LST EN 61558-2-23-2010 Safety of transformers, reactors, power supply units and combinations thereof -- Part 2-23: Particular requirements and tests for transformers and power supply units for construction sites (IEC 61558-2-23:2010)

IEC - International Electrotechnical Commission

IEC 60632-1:1978 High-Voltage Motor Starters Part 1: Direct-on-Line (Full Voltage) A.C. Starters (Edition 1.0)

GOST

GOST IEC 61558-2-4-2015 Safety of power transformers - power supplies - reactors and similar products Part 2-4: Additional requirements and test methods for isolating transformers and power supplies with isolating transformers
GOST IEC 61558-2-1-2015 Safety of power transformers - power supplies - reactors and similar products Part 2-1: Additional requirements and test methods for separating transformers and power supplies with general purpose separating transformers
GOST IEC 61558-2-13-2015 Safety of power transformers - power supplies - reactors and similar products Part 2-13: Additional requirements and test methods for autotransformers and power supplies with autotransformers
GOST IEC 61558-2-23-2015 Safety of power transformers - power supplies - reactors and similar products Part 2-23: Additional requirements and test methods for transformers and power supplies for construction sites
GOST IEC 61558-2-12-2015 Safety of power transformers - power supplies - reactors and similar products Part 2-12: Additional requirements and test methods for transformers with stabilized secondary voltage and stabilized power supplies

IN-BIS

IS 8544 Pt.4-1979 Specification for starters for motors with voltages not exceeding 1000 V Part IV Step-down AC starters: Two-step autotransformer starters

BE-NBN

NBN C 63-292 FASC 4-DEEL 4-1977 Starting device for low-pressure engines. Part 4: AC reduced voltage starters: two-stage automatic transformer starters

Others: