Special gas pipeline pressure maintaining test

Special gas pipeline pressure maintaining test, Total:394 items.

The international standard classification for "Special gas pipeline pressure maintaining test" includes: Pipeline components and pipelines , Rectifiers. Convertors. Stabilized power supply , Road vehicles in general , Electrical and electronic equipment , Pressure vessels, gas cylinders , Piping systems , Petroleum products and natural gas handling equipment , Product and company certification. Conformity assessment , Trailing stock .

The Chinese standard classification for "Special gas pipeline pressure maintaining test" includes: Pressure vessel , Power semiconductor device and parts , Basic standard and general method , Basic standards and general methods , Ignition device , Marine hydraulic/pneumatic elements and accessories , Oil and gas gathering and transportation equipment , Standardization and Quality Management , Railway trucks , Braking system .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 16805-2009 Pressure testing of liquid petroleum pipelines
GB/T 28563-2012 Electrical testing of thyristor valves for ±800 kV ultra high voltage direct current (UHVDC) power transmission
GB/T 16805-1997 Pressure testing of liquid petroleum pipelines
GB/T 26674-2011 Road vehicle - Electrical performance of starter motors - Test methods
GB/T 26673-2011 Road vehicles - Ignition systems - Electrical performance and function test methods
GB/T 9434-1988 Methods of measurement of gas discharge tubes for overvoltage protection
GB/T 20801.5-2006 Pressure Piping Code – Industrial Piping-Part 5: Inspection and Testing
GB/T 5132-1985 Test methods of laminated tubes used for electrical insulation

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 20801.5-2020 Pressure piping code - Industrial piping - Part 5: Inspection and testing

Group Standards of the People's Republic of China

T/CITS 0111-2024 Test method for oil and gas pipe — Full scale four-point bending test method
T/CASEI 009-2022 Guidelines for supervision and inspection of pressure pipeline construction —Utility pipeline
T/QGCML 2506-2023 Technical requirements for leak testing of medium-pressure pipelines for coalbed methane
T/CASEI 007-2022 Guidelines for supervision and inspection of pressure pipeline construction—industrial pipeline
T/CSAA 10-2021 Specification for aerodynamic test of high pressure compressors for commercial high bypass ratio turbofan Aero-engines
T/JSEPA 023-2024 Code for acceptance of shield tunnel structure construction of UHV power pipe
T/CASEI 008-2022 Guidelines for supervision and inspection of pressure pipeline construction—long-distance pipeline

Professional Standard - Special Equipment Specification

TSG D7002-2006 Pressure Piping Components Type Test Regulation
TSG D7004-2010 Periodical Inspection Regulation for City Gas Pressure Pipeline and Thermal Pressure Pipeline
TSG D7006-2020 Pressure Pipe Supervision Inspection Regulation
TSG D7003-2010 Periodical Inspection Regulation for Oil and Gas Pressure Pipeline
TSG D7005-2018 Periodic Inspection Regulation for Industrial Pressure Piping

Professional Standard-Ships

CB 3566-1993 Cracking-protect Valve of Hydraulic Pipeline for Ships
CB/T 3566-1993 Marine hydraulic pipeline rupture protection valve

Henan Provincial Standard of the People's Republic of China

DB41/T 1973-2020 Hydrostatic test rules for long-distance water pipelines

未注明发布机构

NB 20500-2018 Technical regulations for pipe insulation installation and acceptance of pressurized water reactor nuclear power plants
NB 20491-2018 Insulation of auxiliary pipelines and equipment in pressurized water reactor nuclear power plants

国家能源局

NB/T 20500-2018 Technical specification for erection and acceptance of pipe insulation in PWR nuclear power plants
SY/T 7318.4-2018 Standard test method for special properties of line pipe. Part 4: Full-scale gas burst testing
SY/T 7347-2016 Standard of coating and insulation for aboveground oil and gas pipelines
NB/T 10411-2020 Test method for thermal insulation performance of cooling pipeline in coal mine
SY/T 7303-2016 Technical specifications for the liquefied natural gas pipeline cryogenic nitrogen test
NB/T 20491-2018 Thermal insulation of auxiliary piping and equipment in PWR nuclear power plant

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 16805-2017 The pressure testing of steel pipelines for the transportation of petroleum， gas and highly volatile liquids
GB/T 35988-2018 Cathodic protection of offshore pipeline in petroleum, natural gas industries

Zhejiang Provincial Standard of the People's Republic of China

DB3309/T 35-2019 Specifications for the maintenance and management of pressure vessels and pressure pipelines in cold storage

Anhui Provincial Standard of the People's Republic of China

DB34/T 2977-2017 In-service natural gas pipeline protection specification

Professional Standard - Petroleum

SY/T 0085-2012 Standard Test Method for Outdoor Weathering Exposure of Pipeline Coatings
SY/T 0038-1997 Test method for specific bendability of pipeline coatings
SY/T 0038-2013 Test Method for Specific Bendability of Pipeline Coatings
SY/T 0085-1994 Standard of test method for ecposure to natural weathering of pipeline protective coating
SY 0085-2012 Test method for natural weather exposure of pipeline anti-corrosion coating

Hubei Provincial Standard of the People's Republic of China

DB4201/T 622-2020 Safety protection regulations for gas pipeline facilities

Shanxi Provincial Standard of the People's Republic of China

DB14/T 2311-2021 Specifications for construction quality acceptance of hydraulic protection works for gas pipelines

Hebei Provincial Standard of the People's Republic of China

DB13/T 2718-2018 Technical specification for integral hydrostatic test of long-distance water pipeline
DB1304/T 438-2023 Guidelines for online comprehensive inspection of natural gas gate station pressure pipelines

Shandong Provincial Standard of the People's Republic of China

DB37/T 5017-2014 Technical specification for ring pressure connection of gas pipeline
DB37/T 3456.7-2018 Guaranteed testing of special equipment for Major events Part 7：Industrial Piping

Shaanxi Provincial Standard of the People's Republic of China

DB61/T 1485.4-2021 Specifications for Supportive Inspection of Special Equipment for Major Events Part 4: Industrial Pipelines

Professional Standard - Railway

TB/T 1803-2007 Hydraulic test of railway tank car
TB/T 2769.6-1997 Heavy-duty rail car test method safety protection device test

Inner Mongolia Provincial Standard of the People's Republic of China

DB15/T 3099-2023 Specifications for inspection of public gas pipelines

Professional Standard - Electricity

DL/T 1947-2018 Supervision procedure for special on-site acceptance tests of UHV AC electrical equipments

Professional Standard - Electron

SJ 20476-1995 General specification for gas discharge tubes for overvoltage protection

Professional Standard - Automobile

QC/T 38-1992 Automobile and trailer - Test method for pneumatic adjusting and protective device stage

American Society for Testing and Materials (ASTM)

ASTM A1047/A1047M-05(2014) Standard Test Method for Pneumatic Leak Testing of Tubing
ASTM A1047/A1047M-05(2009) Standard Test Method for Pneumatic Leak Testing of Tubing
ASTM C828-23 Standard Test Method for Low-Pressure Air Test of Vitrified Clay Pipe Lines
ASTM C828-11(2021) Standard Test Method for Low-Pressure Air Test of Vitrified Clay Pipe Lines
ASTM C828-03 Standard Test Method for Low-Pressure Air Test of Vitrified Clay Pipe Lines
ASTM C828-11 Standard Test Method for Low-Pressure Air Test of Vitrified Clay Pipe Lines
ASTM C828-06 Standard Test Method for Low-Pressure Air Test of Vitrified Clay Pipe Lines
ASTM C828-98 Standard Test Method for Low-Pressure Air Test of Vitrified Clay Pipe Lines
ASTM C828-11(2016) Standard Test Method for Low-Pressure Air Test of Vitrified Clay Pipe Lines
ASTM C828-01 Standard Test Method for Low-Pressure Air Test of Vitrified Clay Pipe Lines
ASTM C1214-94(2000) Standard Test Method for Concrete Pipe Sewerlines by Negative Air Pressure (Vacuum) Test Method
ASTM A1047/A1047M-05(2023) Standard Test Method for Pneumatic Leak Testing of Tubing
ASTM A1047/A1047M-05(2019) Standard Test Method for Pneumatic Leak Testing of Tubing
ASTM A1047/A1047M-05 Standard Test Method for Pneumatic Leak Testing of Tubing
ASTM C924-02 Standard Practice for Testing Concrete Pipe Sewer Lines by Low-Pressure Air Test Method
ASTM B968/B968M-10 Standard Test Method for Flattening of Copper and Copper-Alloy Pipe and Tube
ASTM C924M-02 Standard Practice for Testing Concrete Pipe Sewer Lines by Low-Pressure Air Test Method (Metric)
ASTM C924M-89(1998) Standard Practice for Testing Concrete Pipe Sewer Lines by Low-Pressure Air Test Method (Metric)
ASTM C924-89(1997) Standard Practice for Testing Concrete Pipe Sewer Lines by Low-Pressure Air Test Method
ASTM F3535-21 Standard Practice for Field Leak Testing of Polyamide-12 (PA12) Pressure Piping Systems Using Gaseous Testing Media Under Pressure (Pneumatic Leak Testing)
ASTM C1618-05 Standard Test Method for Concrete Sanitary Sewer Pipe by Negative (Vacuum) or Positive Air Pressure
ASTM F2786-10 Standard Practice for Field Leak Testing of Polyethylene (PE) Pressure Piping Systems Using Gaseous Media Under Pressure (Pneumatic Leak Testing)
ASTM G70-07 Standard Test Method for Ring Bendability of Pipeline Coatings (Squeeze Test)
ASTM G70-81(1998) Standard Test Method for Ring Bendability of Pipeline Coatings (Squeeze Test)
ASTM G62-23 Standard Test Methods for Holiday Detection of Coatings used to Protect Pipelines
ASTM F2786-16 Standard Practice for Field Leak Testing of Polyethylene (PE) Pressure Piping Systems Using Gaseous Testing Media Under Pressure (Pneumatic Leak Testing)
ASTM F1417-11 Standard Test Method for Installation Acceptance of Plastic Gravity Sewer Lines Using Low-Pressure Air
ASTM G80-88(1998) Standard Test Method for Specific Cathodic Disbonding of Pipeline Coatings
ASTM RR-F17-1048 2002 F2231-Test Method for Charpy Impact Test on Thin Specimens of Polyethylene Used in Pressurized Pipes
ASTM D2513-03 Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings
ASTM G80-07 Standard Test Method for Specific Cathodic Disbonding of Pipeline Coatings
ASTM D2513-03a Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings
ASTM G10-10(2015) Standard Test Method for Specific Bendability of Pipeline Coatings
ASTM D2513-03b Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings
ASTM C165-07(2017) Standard Test Method for Measuring Compressive Properties of Thermal Insulations
ASTM F1041-20 Standard Guide for Squeeze-Off of Polyolefin Gas Pressure Pipe and Tubing
ASTM C335-05a Standard Test Method for Steady-State Heat Transfer Properties of Pipe Insulation
ASTM C335-05 Standard Test Method for Steady-State Heat Transfer Properties of Pipe Insulation
ASTM C1091-03a(2008) Standard Test Method for Hydrostatic Infiltration Testing of Vitrified Clay Pipe Lines
ASTM C1091-03a Standard Test Method for Hydrostatic Infiltration Testing of Vitrified Clay Pipe Lines
ASTM C1214-02 Standard Test Method for Concrete Pipe Sewerlines by Negative Air Pressure (Vacuum) Test Method
ASTM C1214-02(2009) Standard Test Method for Concrete Pipe Sewerlines by Negative Air Pressure (Vacuum) Test Method
ASTM F2231-02(2024) Standard Test Method for Charpy Impact Test on Thin Specimens of Polyethylene Used in Pressurized Pipes
ASTM C1091-03 Standard Test Method for Hydrostatic Infiltration and Exfiltration Testing of Vitrified Clay Pipe Lines
ASTM C1214-13 Standard Test Method for Concrete Pipe Sewerlines by Negative Air Pressure (Vacuum) Test Method
ASTM C1091-03a(2013) Standard Test Method for Hydrostatic Infiltration Testing of Vitrified Clay Pipe Lines
ASTM F1041-02(2016) Standard Guide for Squeeze-Off of Polyolefin Gas Pressure Pipe and Tubing
ASTM D5534-94(2011)e1 Standard Test Method for Vapor-Phase Rust-Preventing Characteristics of Hydraulic Fluids

API - American Petroleum Institute

API RP 1110-1997 Pressure Testing of Liquid Petroleum Pipelines (Fourth Edition)
API RP 1110-1991 Pressure Testing of Liquid Petroleum Pipelines Third Edition

RU-GOST R

GOST 8695-1975 Tubing. Flattening testing method
GOST 34069-2017 Gas supply system. Main pipeline gas transportation. Mobile compressor unit. Control and testing
GOST 34068-2017 Gas supply system. Natural gas production. Field pipelines. Mechanical safety. Pressure and leak tests
GOST R 55508-2013 Pipeline valves. Technique of the experimental definitions hydraulic and cavitation characteristics
GOST R 56006-2014 Pipeline valves. Testing and acceptance on objects of the gas main pipelines before commissioning. General technical requirements
GOST 8694-1975 Tubing. Expansion testing method
GOST R 12.4.276-2-2012 Occupational safety standards system. Respiratory protective devices. Compressed air line supply breating apparatus. Part 2. Apparatus with half mask at positive pressure. Requirements. Test methods. Marking
GOST R ISO 7396-1-2011 Medical gas pipeline systems. Part 1. Pipeline systems for compressed medical gases and vacuum

FI-SFS

SFS 2897-1980 Natural Gas Pipeline. pressure test
SFS 3174-1981 Natural Gas Pipeline. Safety valve. Exhaust equipment and pipes
SFS 5487-1989 Gas pipeline. Conveying pipelines and pressure reducing equipment using pipelines

National Association of Pipe Fabricators (NAPF)

PFI ES-4-2006 Hydrostatic Testing of Fabricated Piping
PFI ES-4-2013 HYDROSTATIC TESTING OF FABRICATED PIPING
PFI ES-4-1985 Hydrostatic Testing of Fabricated Piping R(2002)

British Standards Institution (BSI)

BS EN ISO 3459:2022 Plastic piping systems. Mechanical joints between fittings and pressure pipes. Test method for leaktightness under negative pressure
BS EN 6059-501:2010 Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Voltage proof test
BS EN 737-3:2000 Medical gas pipeline systems - Pipelines for compressed medical gases and vacuum
BS EN 50396:2005 Non electrical test methods for low voltage electric cables
BS DD CLC/TS 50430:2005 Optical fibre cables. Gas pipe cables. Family specifications for cables to be installed in high pressure gas pipes
BS ISO 13476:1997 Road vehicles - Ignition coils - Electrical characteristics and test methods
BS EN 12106:1998 Plastics piping systems. Polyethylene (PE) pipes. Test method for the resistance to internal pressure after application of squeeze-off
BS EN 802:1995 Plastics piping and ducting systems. Injection-moulded thermoplastics fittings for pressure piping systems. Test method for maximum deformation by crushing
BS ISO 13476:1998 Road vehicles. Ignition coils. Electrical characteristics and test methods
21/30429636 DC BS EN ISO 3459. Plastic piping systems. Mechanical joints between fittings and pressure pipes. Test method for leak tightness under negative pressure
BS EN 802:1995(1999) Plastics piping and ducting systems — Injection - moulded thermoplastics fittings for pressure piping systems — Test method for maximum deformation by crushing
BS EN ISO 7396-1:2016 Medical gas pipeline systems. Pipeline systems for compressed medical gases and vacuum
BS EN ISO 7396-1:2007+A3:2013 Medical gas pipeline systems - Pipeline systems for compressed medical gases and vacuum
BS EN ISO 7396-1:2007+A2:2010 Medical gas pipeline systems - Pipeline systems for compressed medical gases and vacuum
BS ISO 7634:2007 Road vehicles - Compressed air braking systems for towed vehicles including those with electronic braking control functions . Test procedures
BS EN ISO 7396-1:2016+A1:2019 Medical gas pipeline systems. Pipeline systems for compressed medical gases and vacuum
BS AU 163a:1985 Specification for pressure test connection for compressed-air pneumatic braking equipment for road vehicles
BS ISO 21498-1:2021 Electrically propelled road vehicles. Electrical specifications and tests for voltage class B systems and components. Voltage sub-classes and characteristics
BS EN ISO 15589-1:2017 Petroleum, petrochemical and natural gas industries. Cathodic protection of pipeline systems. On-land pipelines
BS ISO 15589-1:2015 Petroleum, petrochemical and natural gas industries. Cathodic protection of pipeline systems. On-land pipelines
BS ISO 8574:2008 Aerospace. Hydraulic system tubing. Qualification tests for bent tubes
BS EN 14141:2003 Valves for natural gas transportation in pipelines. Performance requirements and tests
BS 4508-4:1977 Thermally insulated underground pipelines - Specific testing and inspection requirements for cased systems without air gap
BS EN 14141:2013 Valves for natural gas transportation in pipelines. Performance requirements and tests
BS EN 738-2:1999 Pressure regulators for use with medical gases - Manifold and line pressure regulators
BS ISO 15501-2:2016 Road vehicles. Compressed natural gas (CNG) fuel systems. Test methods
BS EN 1053:1996 Plastics piping systems - Thermoplastics piping systems for non-pressure applications - Test methods for watertightness

BE-NBN

NBN-EN 10233-1994 Metallic materials. Tube. Flattening test
NBN EN 802-1994 Plastics piping and ducting systems. Injection-moulded thermoplastics fittings for pressure piping systems. Test method for maximum deformation by crushing
NBN EN 804-1994 Plastics piping systems. Injection-moulded socket fittings for solvent-cemented joints for pressure piping. Test method for resistance to a short-term internal hydrostatic pressure

German Institute for Standardization

DIN 86001:2010 Pipelines on ships - Pressure ratings, pressure tests
DIN 86001:1997 Pipelines on ships - Pressure ratings, tests
DIN EN 12106:1997 Plastics piping systems - Polyethylene (PE) pipes - Test method for the resistance to internal pressure after application of squeeze-off; German version EN 12106:1997
DIN EN 1053:1995 Plastics piping systems - Thermoplastics piping systems for non-pressure applications - Test method for watertightness; German version EN 1053:1995
DIN 74310-2:1993 Air braking systems; hoses; requirements, tests
DIN EN 12106:1997-11 Plastics piping systems - Polyethylene (PE) pipes - Test method for the resistance to internal pressure after application of squeeze-off; German version EN 12106:1997 / Note: To be replaced by DIN EN 12106 (2014-06).
DIN EN 802:1994-09 Plastics piping and ducting systems - Injection-moulded thermoplastics fittings for pressure piping systems - Test method for maximum deformation by crushing; German version EN 802:1994
DIN 53769-2:1986 Testing of glass fibre reinforced plastics pipes; long-term hydrostatic pressure test
DIN EN ISO 3459:2022-07 Plastic piping systems - Mechanical joints between fittings and pressure pipes - Test method for leaktightness under negative pressure (ISO 3459:2022); German and English version EN ISO 3459:2022
DIN EN ISO 3458:2015-08 Plastic piping systems - Mechanical joints between fittings and pressure pipes - Test method for leaktightness under internal pressure (ISO 3458:2015); German and English version EN ISO 3458:2015
DIN EN 12106 E:2014-06 Plastics piping systems - Polyethylene (PE) pipes - Test method for the resistance to internal pressure after application of squeeze-off
DIN 86001:2010-09 Pipelines on ships - Pressure ratings, pressure tests
DIN 86001 E:2007-07 Pipelines on ships - Pressure ratings, pressure tests
DIN EN 14594:2005 Respiratory protective devices - Continuous flow compressed air line breathing apparatus - Requirements, testing, marking; German version EN 14594:2005
DIN EN 14141:2013-08 Valves for natural gas transportation in pipelines - Performance requirements and tests; German version EN 14141:2013
DIN EN 14594 Berichtigung 1:2006 Respiratory protective devices - Continuous flow compressed air line breathing apparatus - Requirements, testing, marking; German version EN 14594:2005, Corrgigenda to DIN EN 14594:2005-07; German version EN 14594:2005/AC:2005
DIN EN 802:1994 Plastics piping and ducting systems - Injection-moulded thermoplastics fittings for pressure piping systems - Test method for maximum deformation by crushing; German version EN 802:1994
DIN EN ISO 7396-1:2019-06 Medical gas pipeline systems - Part 1: Pipeline systems for compressed medical gases and vacuum (ISO 7396-1:2016 + Amd 1:2017); German version EN ISO 7396-1:2016 + A1:2019

GOST

GOST 8695-2022 Metal pipes. Flattening testing method
GOST 356-1968 Conditional, test and working pressures for fittings and connecting parts of pipelines

American National Standards Institute （ANSI)

ANSI/IEEE C62.31:2006 Standard Test Methods for Low-Voltage Gas-Tube Surge-Protective Device Components
ANSI/ASHRAE/SMACNA 126-2008 Methods of Testing HVAC Air Ducts
ANSI/ASTM D1599:1999 Test Method for Short-Time Hydraulic Failure Pressure of Plastic Pipe, Tubing, and Fittings
ANSI/ASTM F2786:2010 Practice for Field Leak Testing of Polyethylene (PE) Pressure Piping Systems Using Gaseous Media Under Pressure (Pneumatic Leak Testing)
ANSI/ASTM D2671:2013 Test Methods for Heat-Shrinkable Tubing for Electrical Use
ANSI/ASTM F2785:2020 Standard Specification for Polyamide 12 Gas Pressure Pipe, Tubing, and Fittings
ANSI/ASTM F2785:2021 Standard Specification for Polyamide 12 Gas Pressure Pipe, Tubing, and Fittings
ANSI/ASTM D2513:2020 Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings
ANSI/ASTM F2785:2012 Specification for Polyamide 12 Gas Pressure Pipe, Tubing, and Fittings
ANSI/NFPA 274-2009 Standard Test Method to Evaluate Fire Performance Characteristics of Pipe Insulation
ANSI/SMACNA 016-2012 HVAC Air Duct Leakage Test Manual

IT-UNI

UNI 5336-1969 Pipes, connections and special fittings for gray iron pressure pipes. Quality, regulations and testing
UNI 7516-1976 asbestos. On-site pressure testing of cement pipelines
UNI ISO 10802:2020 Ductile iron pipelines — Hydrostatic testing after installation
UNI 5337-1969 Gray iron pressure pipe piping, connections and special fittings. Pipe sleeve connection
UNI 5462-1964 No welded steel pipe. Boiler pipes. Instrument piping and piping for high pressure and high temperature thermal equipment. Quality, regulations and testing
UNI 4401-1960 Industrial pressure reducer for canned compressed gas, melted gas and liquefied gas. Definitions, Characteristics and Tests

PL-PKN

PN M34503-1992 Gas pipelines. Test of gas pipelines
PN M51079-02-1992 Portable fire extinguishers; retention of charge, dielectric test, compaction tests, special re?uirements

GM Europe

GME14018-2007 Rohrsteckstellenfestsitzpr眉fung von Abgasanlagenrohren Testing the Force Fit of Pipe Connections of Exhaust System Pipes English/German; Note: This specification may be applied only for current projects. It is Superceded for all future projects and repl

International Organization for Standardization (ISO)

ISO 7658:1984 Pipework; Stripwound flexible metal hoses; Testing and verification of characteristics
ISO 4093:1986 Road vehicles; Fuel injection pumps; High-pressure pipes for testing
ISO 10802:1992 Ductile iron pipelines; hydrostatic testing after installation
ISO 3583:1982 Road vehicles — Pressure test connection for compressed-air pneumatic braking equipment
ISO 3583:1984 Road vehicles; Pressure test connection for compressed-air pneumatic braking equipment
ISO 3583:1975 Title missing - Legacy paper document
ISO 4093:1978 Road vehicles — Fuel injection pumps — High pressure pipes for testing
ISO 13476:1997 Road vehicles - Ignition coils - Electrical characteristics and test methods
ISO 7634:2003 Road vehicles - Compressed-air braking systems - Test procedures
ISO 21780:2020 Road vehicles — Supply voltage of 48 V — Electrical requirements and tests
ISO 3459:2022 Plastic piping systems — Mechanical joints between fittings and pressure pipes — Test method for leaktightness under negative pressure
ISO 9853:1991 Injection-moulded unplasticized poly(vinyl chloride) (PVC-U) fittings for pressure pipe systems; crushing test
ISO 7396-1:2002 Medical gas pipeline systems - Part 1: Pipelines for compressed medical gases and vacuum
ISO 7396-1:2016 Medical gas pipeline systems - Part 1: Pipeline systems for compressed medical gases and vacuum

Association Francaise de Normalisation

NF S76-033:1995 Respiratory protective devices. Compressed air line breathing apparatus for use with a full face mask, half mask or a mouthpiece assembly. Requirements, testing, marking.
NF EN 12106:1997 Plastic piping systems - Polyethylene (PE) pipes - Internal pressure resistance test method after application of crushing
NF T54-012:2015 Plastic piping systems - Mechanical joints between fittings and pressure pipes - Test method for leaktightness under negative pressure
NF T54-012*NF EN ISO 3459:2022 Plastic piping systems - Mechanical joints between fittings and pressure pipes - Test method for leaktightness under negative pressure
NF P41-501:1973 Test methods for external protection of metal pipes. Testing of adhesion of tape protection products
NF S95-155:2007 Medical gas pipeline systems - Part 1 : pipelines for compressed medical gases and vacuum.
NF R16-317:1987 Road vehicles. Fuel injection pumps. High-pressure pipes for testing.
NF S95-155:2000 Medical gaz pipeline systems - Part 3 : pipelines for compressed medical gases and vacuum.
NF EN 60229:2008 Electrical cables - Tests on extruded outer sheaths with special protection function
NF E29-320*NF EN 14141:2013 Valves for natural gas transportation in pipelines - Performance requirements and tests
NF T54-901:1995 Plastics piping systems. Thermoplastics piping systems for non-pressure applications. Test method for watertightness.
FD CEN/TR 14920:2006 Résistance des tubes pour les branchements et les collecteurs d'assainissement durant le curage sous haute pression - Méthode d'essai à vitesse variable
NF S95-155-1*NF EN ISO 7396-1:2016 Medical gas pipeline systems - Part 1 : pipeline systems for compressed medical gases and vacuum
NF T54-065:1987 PLASTICS. POLYETHYLENE PIPES FOR GASEOUS COMBUSTIBLE DISTRIBUTION NETWORKS. SPECIFICATIONS AND TEST METHODS.
NF T54-931*NF EN 12106:1997 Plastics piping systems. Polyethylene (PE) pipes. Test method for the resistance to internal pressure after application of squeeze-off.
NF EN ISO 10297/A1:2017 Gas cylinders - Cylinder valves - Specifications and type tests - Amendment 1: pressure drums and tubes
NF L50-150-501*NF EN 6059-501:2010 Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 501 : voltage proof test

CZ-CSN

CSN 75 5911-1995 Prcssurc tests of water and irrigation pipelines
CSN 73 6611-1983 Pressure tests for water and irrigation pipelines
CSN 33 2165-1983 Principles for protection of underground insulated steel pipelines against dangerous influences of very high voltage overhead iineB and very high voltage stations

Spanish Association for Standardization (UNE)

UNE 22-070-1986 Compressed air and explosive air discharge piping. Conductivity. Test method description
UNE 19 002 pipeline. Pressure segment setting. Rated pressure; working pressure; test pressure
UNE 60670-8:2023 Gas installations pipework supplied at maximum operating pressure (MOP) up to and including 5 bar. Part 8: Pressure tightness tests for receiving installation pipework
UNE 60670-8:2005 Gas installations pipework supplied at maximum operating pressure (MOP) up to and including 5 bar. Part 8: Pressure tightness tests for receiving installation pipework
UNE-EN 802:1995 Plastics piping and ducting systems - Injection-moulded thermoplastics fittings for pressure piping systems - Test method for maximum deformation by crushing
UNE-EN 60229:2009 Electric cables - Tests on extruded oversheaths with a special protective function
UNE-EN ISO 3459:2022 Plastic piping systems - Mechanical joints between fittings and pressure pipes - Test method for leaktightness under negative pressure (ISO 3459:2022)
UNE-EN 737-3:1999 MEDICAL GAS PIPELINE SYSTEMS - PART 3: PIPELINES FOR COMPRESSED MEDICAL GASES AND VACUUM
UNE 21-143-1985 Testing of cable jackets with special protective functions and extrusion applications
UNE-EN 14141:2014 Valves for natural gas transportation in pipelines - Performance requirements and tests
UNE 53-367-1990 Characteristics and test methods of low-pressure polyethylene pipes for irrigation
UNE 53-428-1990 Characteristics and test methods of water-conducting polyvinyl chloride fittings and pressure pipes
UNE 53-381-1989 Characteristics and test methods of pressure water conduits made of propylene
UNE-EN ISO 7396-1:2016 Medical gas pipeline systems - Part 1: Pipeline systems for compressed medical gases and vacuum (ISO 7396-1:2016)

US-FCR

FCR UFGS-40 42 13.26 40-2006 PROCESS PIPING INSULATION FOR SPECIALTY APPLICATIONS
FCR UFGS-22 15 26.00 20-2006 HIGH AND MEDIUM PRESSURE COMPRESSED AIR PIPING
FCR UFGS-22 15 13.16 40-2014 HIGH-PRESSURE COMPRESSED-AIR PIPING, PIPING COMPONENTS, AND VALVES, STAINLESS
FCR UFGS-43 15 00.00 20-2006 LOW PRESSURE COMPRESSED AIR PIPING (NON-BREATHING AIR TYPE)
FCR FED H-08-4 VOL 3 SEC III 717-1993 COMPRESSED AIR SYSTEM - STANDARD PIPING DIAGRAM

Korean Agency for Technology and Standards (KATS)

KS R 9177-2003 Electro-Pneumatic point machines-Test methods
KS R ISO 3583-2003(2018) Road vehicles－Pressure test connection forcompressed-air pneumatic braking equipment
KS D ISO 10802-2013 Ductile iron pipelines－Hydrostatic testing after installation
KS D ISO 10802:2006 Ductile iron pipelines-Hydrostatic testing after installation
KS D ISO 10802-2006(2011) Ductile iron pipelines－Hydrostatic testing after installation
KS D ISO 10802:2013 Ductile iron pipelines－Hydrostatic testing after installation
KS R ISO 3583:2003 Road vehicles－Pressure test connection forcompressed-air pneumatic braking equipment
KS R ISO 13476-2002(2017) Road vehicles－Ignition coils－Electrical characteristics and test methods
KS R ISO 13476:2002 Road vehicles－Ignition coils－Electrical characteristics and test methods
KS M ISO 3458:2019 Plastics piping systems — Mechanical joints between fittings and pressure pipes — Test method for leak tightness under internal pressure
KS R ISO 7634-2015(2020) Road vehicles－Compressed-air braking systems－Test procedures
KS R ISO 13476-2002(2022) Road vehicles－Ignition coils－Electrical characteristics and test methods
KS R ISO 13476-2022 Road vehicles－Ignition coils－Electrical characteristics and test methods
KS R ISO 7634-2020 Road vehicles－Compressed-air braking systems－Test procedures
KS M ISO 9853-2005(2020) Injection-moulded unplasticized poly(vinyl chloride)(PVC－U) fittings for pressure pipe systems－Crushing test
KS B 8053-2022 Gas heat pump — Ducted appliances — Testing and rating for performance
KS M ISO 9853:2005 Injection-moulded unplasticized poly(vinyl chloride)(PVC-U) fittings for pressure pipe systems-Crushing test
KS B 8052-2022 Gas heat pumps — Non-ducted appliances — Testing and rating for performance
KS M ISO 9853-2020 Injection-moulded unplasticized poly(vinyl chloride)(PVC－U) fittings for pressure pipe systems－Crushing test

BELST

STB 2162-2011 Oil pipeline pipes. Testing method by internal pressure to fracture

SE-SIS

SIS SMS 1230-1975 Pipeline systems. Nominal pressure, PN. Working pressure. Test pressure
SIS SS-ISO 4093:1988 Road vehicles - Fuel injection pumps - High-pressure pipes for testing
SIS SS-ISO 4093:1979 Road vehicles — Fuel injection pumps — High pressure pipes for testing
SIS SS 02 71 26-1991 Geotechnical tests — Compression properties — Oedometer test, CRS-test — Cohesive soil
SIS 11 26 44-1967 Flattening test on tubes

AR-IRAM

IRAM 2570-1961 Sanitary pipes (general characteristics and test methods)

European Committee for Standardization (CEN)

EN 12106:1997 Plastics Piping Systems - Polyethylene (PE) Pipes - Test Method for the Resistance to Internal Pressure After Application of Squeeze-Off
EN 802:1994 Plastics piping and ducting systems - Injection-moulded thermoplastics fittings for pressure piping systems - Test method for maximum deformation by crushing
EN 14141:2013 Valves for natural gas transportation in pipelines - Performance requirements and tests
EN 15632-4:2009 District heating pipes - Pre-insulated flexible pipe systems - Part 4: Bonded system with metal service pipes - Requirements and test methods
EN ISO 7751:2016 Rubber and plastics hoses and hose assemblies - Ratios of proof and burst pressure to maximum working pressure (ISO 7751:2016)
EN 6059-501:2010 Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 501: Voltage proof test
EN 737-3:1998/PRA1:1999 AMD A1 Medical Gas Pipeline Systems - Part 3: Pipelines for Compressed Medical Gases and Vacuum
EN 1638:1997 Plastics Piping Systems - Glass-Reinforced Thermosetting Plastics (GRP) Pipes - Test Method for the Effects of Cyclic Internal Pressure

Society of Automotive Engineers (SAE)

SAE AS603A-2008 Impulse Testing of Hydraulic Hose, Tubing, and Fitting Assemblies

TH-TISI

TIS 2195-2004 Ductile iron pipelines.hydrostatic testing after installation
TIS 1337-1996 Fire resistance tests.ventilation ducts

National Aeronautics and Space Administration (NASA)

NASA UFGS-22 15 13.16 40-2011 HIGH-PRESSURE COMPRESSED-AIR PIPING, PIPING COMPONENTS, AND VALVES, STAINLESS

YU-JUS

JUS C.B5.302-1990 Pipenork. Strifmaand flexible metal hoses. Testing and verification of cbaracte-ristics
JUS L.N1.030-1987 Hydraulic andpneumatic. Nominal diameters for tubesand hoses

SCC

MIL MIL-STD-419E-2010 Cleaning, Protecting, and Testing Piping, Tubing, and Fittings for Hydraulic Power Transmission Equipment
NS-EN 12106:1997 Plastics piping systems — Polyethylene (PE) pipes — Test method for the resistance to internal pressure after application of squeeze-off
DANSK DS/EN 12106:1997 Plastics piping systems - Polyethylene (PE) pipes - Test method for the resistance to internal pressure after application of squeeze-off
AENOR UNE-EN 12106:1998 Plastics piping systems - Polyethylene (PE) pipes - Test method for the resistance to internal pressure after application of squeeze-off
NS-EN 802:1994 Plastics piping and ducting systems — Injection-moulded thermoplastics fittings for pressure piping systems — Test method for maximum deformation by crushing
BS EN 270:1995 Respiratory protective devices. Compressed air line breathing apparatus incorporating a hood. Requirements, testing, marking
BS EN ISO 7396-1:2007 Medical gas pipeline systems. Pipeline systems for compressed medical gases and vacuum
DANSK DS/EN ISO 3459:2015 Plastic piping systems – Mechanical joints between fittings and pressure pipes – Test method for leaktightness under negative pressure
AENOR UNE-EN 802:1995 Plastics piping and ducting systems - Injection-molded thermoplastics fittings for pressure piping systems - Test method for maximum deformation by crushing
DANSK DS/EN 802:1995 Plastics piping and ducting systems - Injection-moulded thermoplastics fittings for pressure piping systems - Test method for maximum deformation by crushing
DANSK DS/EN ISO 3458:2015 Plastics piping systems - Mechanical joints between fittings and pressure pipes - Test method for leaktightness under internal pressure
DANSK DS/EN 14141:2013 Valves for natural gas transportation in pipelines - Performance requirements and tests
NS-EN 737-3:1998 Medical gas pipeline systems — Part 3: Pipelines for compressed medical gases and vacuum
DANSK DS/ISO 3459:2022 Plastic piping systems – Mechanical joints between fittings and pressure pipes – Test method for leaktightness under negative pressure
CAN/CSA-Z317.1-1999(R2007) Special Requirements for Plumbing Installations in Health Care Facilities
DANSK DS/EN 1053:1996 Plastics piping systems – Thermoplastics piping systems for non-pressure applications – Test method for watertightness
MIL MIL-STD-101C-2014 Color Code for Pipelines and for Compressed Gas Cylinders
AENOR UNE-EN 14141:2014 Valves for natural gas transportation in pipelines - Performance requirements and tests
NS-EN ISO 3458:2015 Plastics piping systems — Mechanical joints between fittings and pressure pipes — Test method for leaktightness under internal pressure (ISO 3458:2015)
NS-EN ISO 3459:2015 Plastic piping systems — Mechanical joints between fittings and pressure pipes — Test method for leaktightness under negative pressure (ISO 3459:2015)
NS-EN 14141:2003 Valves for natural gas transportation in pipelines — Performance requirements and tests
NS-EN 1053:1995 Plastics piping systems — Thermoplastics piping systems for non-pressure applications — Test method for watertightness
NS-EN 14141:2013 Valves for natural gas transportation in pipelines — Performance requirements and tests
DANSK DS/EN ISO 7396-1:2016 Medical gas pipeline systems - Part 1: Pipeline systems for compressed medical gases and vacuum
NS-EN ISO 3459:2022 Plastic piping systems - Mechanical joints between fittings and pressure pipes - Test method for leaktightness under negative pressure (ISO 3459:2022)
CAN/CSA-Z305.2-M88-1988(C2001) Low pressure connection assemblies for medical gas pipelines
AENOR UNE-EN ISO 3459:2015 Plastic piping systems - Mechanical joints between fittings and pressure pipes - Test method for leaktightness under negative pressure (ISO 3459:2015)
DANSK DS/EN ISO 7396-1/A1:2016 Medical gas pipeline systems - Part 1: Pipeline systems for compressed medical gases and vacuum

DE-GPVA

AD 2000-Merkblatt HP512 R-2003 Manufacture and testing of pressure vessels.Design examination, final testing and pressure testing of piping
AD 2000-Merkblatt HP100 R-2007 Manufacture and testing of pressure vessels.Construction regulations.Metal piping

US-VA

VA 22 61 13.74-2009 DENTAL COMPRESSED-AIR PIPING

GSO

NB/T 11449-2023 Test methods for gas sensors in mining pipelines
BH GSO ISO 3458:2017 Plastics piping systems -- Mechanical joints between fittings and pressure pipes -- Test method for leaktightness under internal pressure
GSO ISO 3459:2021 Plastic piping systems — Mechanical joints between fittings and pressure pipes — Test method for leaktightness under negative pressure
BH GSO ISO 10802:2023 Ductile iron pipelines — Hydrostatic testing after installation
GSO ISO 3458:2016 Plastics piping systems -- Mechanical joints between fittings and pressure pipes -- Test method for leaktightness under internal pressure
OS GSO ISO 3458:2016 Plastics piping systems -- Mechanical joints between fittings and pressure pipes -- Test method for leaktightness under internal pressure
BH GSO ISO 3459:2022 Plastic piping systems — Mechanical joints between fittings and pressure pipes — Test method for leaktightness under negative pressure
GSO ISO 10802:2023 Ductile iron pipelines — Hydrostatic testing after installation
OS GSO ISO 13476:2015 Road vehicles -- Ignition coils -- Electrical characteristics and test methods
BH GSO ISO 13476:2017 Road vehicles -- Ignition coils -- Electrical characteristics and test methods
GSO ISO 17464:2021 Pneumatic tubes for automotive vehicles — Technical requirements and test methods
BH GSO ISO 17464:2022 Pneumatic tubes for automotive vehicles — Technical requirements and test methods
OS GSO ISO 7396-1:2016 Medical gas pipeline systems -- Part 1: Pipeline systems for compressed medical gases and vacuum
BH GSO ISO 7396-1:2017 Medical gas pipeline systems -- Part 1: Pipeline systems for compressed medical gases and vacuum
GSO ISO 7396-1:2016 Medical gas pipeline systems -- Part 1: Pipeline systems for compressed medical gases and vacuum

GB-REG

REG NASA-LLIS-1096--1997 Lessons Learned ?Construction Site Safety/Handling Pressurized Pipes/Compressed Air Line
REG NASA-LLIS-0066-1992 Lessons Learned - Dewar Vent Plumbing

Australian/New Zealand Standard (AU-AS/NZS)

AS/NZS 2885.5:2012 Pipelines - Gases and Liquid Petroleum - Field Pressure Testing
AS/NZS 1462.3:1998 Methods of test for plastics pipes and fittings - Method for determining the impact characteristics of pipes
AS/NZS 2885.5:2002 Pipelines-Gas and liquid petroleum - Field pressure testing
AS/NZS 1462.8:2008 Methods of test for plastics pipes and fittings - Method of testing the leaktightness of assemblies

South African Bureau of Standard

SANS 10802:2010 Ductile iron pipelines - Hydrostatic testing after installation
SANS 13253:2003 Ducted air-conditioners and air-to-air heat pumps - Testing and rating for performance
SANS 7396-1:2009 Medical gas pipeline systems Part 1: Pipeline systems for compressed medical gases and vacuum
SANS 54594:2006 Respiratory protective devices - Continuous flow compressed air line breathing apparatus - Requirements, testing, marking
SANS 50270:1994 Respiratory protective devices - Compressed air line breathing apparatus incorporating a hood - Requirements, testing, marking

Indonesia Standards

SNI 05-6324-2000 Colour coding of pressure pipes, air pipes and liquid pipes
SNI 03-3442-1993 Code for piezometer installation of open stand pipe tubing casagrande

KR-KS

KS R ISO 3583-2003(2023) Road vehicles－Pressure test connection forcompressed-air pneumatic braking equipment
KS M ISO 3458-2019 Plastics piping systems — Mechanical joints between fittings and pressure pipes — Test method for leak tightness under internal pressure
KS B ISO 13253-2018(2023) Ducted air-conditioners and air-to-air heat pumps — Testing and rating for performance

IN-BIS

IS 1538 Pt.4-1976 Specification for Cast Iron Fittings for Water, Gas and Sewer Pressure Pipes Part IV Particular Requirements for Pipe and Fitting Flanges
IS 1538 Pt.9-1976 Specification for cast iron fittings for water, gas and sewage pressure piping Part IX Special requirements for casing
IS 1538 Pt.21-1976 Specification for cast iron fittings for water, gas and sewage pressure piping Section XXI Special requirements for double flange tapered pipes

NZ-SNZ

NZS 5223.1:1985 Code of Practice for High Pressure Gas and Petroleum Liquids Pipelines Part 1: High Pressure Gas Pipelines

U.S. Military Regulations and Norms

ARMY MIL-STD-101 B-1970 COLOR CODE FOR PIPELINES AND FOR COMPRESSED GAS CYLINDERS

AT-ON

ONORM M 3036-1983 Eddy current testing of pipes as replacement for the pressure-tightness-test

Danish Standards Foundation

DS 1122.1:1983 Ventilating sheet ducts. Strength and air tightness. Testing
DS/EN 60229:2008 Electric cables - Tests on extruded oversheaths with a special protective function
DS 2199.1:1984 PEM ad PEH pipelines. Mechanical joints for PEM/PEH pipelines for gas distributions. Ganeral requirements and testing
DS/EN 270:1994 Respiratory protective devices - Compressed air line breathing apparatus incorporating a hood - Requirements, testing, marking
DS/EN 12106:1998 Plastics piping systems - Polyethylene (PE) pipes - Test method for the resistance to internal pressure after application of squeeze-off
DS/EN 802:1995 Plastics piping and ducting systems - Injection-moulded thermoplastics fittings for pressure piping systems - Test method for maximum deformation by crushing
DS/EN 16302:2013 Conservation of cultural heritage - Test methods - Measurement of water absorption by pipe method
DS/EN 14141:2013 Valves for natural gas transportation in pipelines - Performance requirements and tests
DS/EN ISO 7396-1/A2:2010 Medical gas pipeline systems - Part 1: Pipeline systems for compressed medical gases and vacuum
DS/EN ISO 7396-1:2007 Medical gas pipeline systems - Part 1: Pipeline systems for compressed medical gases and vacuum

IEEE - The Institute of Electrical and Electronics Engineers@ Inc.

IEEE C62.31-2006 Test Methods for Low- Voltage Gas-Tube Surge-Protective Device Components

GOSTR

GOST 34437-2018 Pipeline valves. Technique of the experimental determination of hydraulic and cavitation characteristics
GOST R ISO 3458-2020 Plastis piping systems. Mechanical joints between fittings and pressure pipes. Test method for leak tightness under internal pressure
GOST R 59111-2020 Plastic piping systems. Mechanical joints between fittings and pressure pipes. Test method for leak tightness under negative pressure
GOST 33936-2016 Gas supply system. Main pipeline gas transportation. Environmental protection. Protection of the water environment. Water preparation. Control

VN-TCVN

TCVN 6822-2001 Road vehicles.Pressure test connection for compressed-air pneumatic braking equipment

European Committee for Electrotechnical Standardization（CENELEC）

CLC/TS 50430-2005 Optical fibre cables Gas pipe cables Family specification for cables to be installed in high pressure gas pipes
EN 14141:2003 Valves for natural gas transportation in pipelines Performance requirements and tests

United States Navy

NAVY A-A-59822-2009 PLUG ASSEMBLIES, GRIPPERS, OD AND ID TYPES FOR TEMPORARY PRESSURE TESTING OF WATER, OIL AND GAS TRANSMISSION PIPING

Canadian Standards Association (CSA)

CSA Z317.1-2021 Special requirements for plumbing installations in health care facilities

Standard Association of Australia （SAA）

AS 1518:1979 Extruded high density polyethylene protective coating for pipes
AS 1978:1977 Rules for the field pressure testing of gas and liquid petroleum land or submarine pipelines known as the SAA Code for Field Pressure Testing of Pipelines
AS 2885.5:2020/Amdt 1:2022 Pipelines — Gas and liquid petroleum, Part 5: Field pressure testing
AS 2885.5:2020 Pipelines — Gas and liquid petroleum, Part 5: Field pressure testing
AS CB18.1 INT 1:1971 Design, fabrication, installation and inspection of pressure piping (known as the SAA Pressure Piping Code) - Interpretations to SAA Pressure Piping Code No 1 (October 1971) - Application of AS 1074 pipe for pressure piping
AS CB18.1:1967 Design, fabrication, installation and inspection of pressure piping (known as the SAA Pressure Piping Code), Part 1: Ferrous piping

Lithuanian Standards Office

LST EN 12106-2002 Plastics piping systems - Polyethylene (PE) pipes - Test method for the resistance to internal pressure after application of squeeze-off
LST EN 802-2001 Plastics piping and ducting systems - Injection-moulded thermoplastics fittings for pressure piping systems - Test method for maximum deformation by crushing
LST EN 60229-2008 Electric cables - Tests on extruded oversheaths with a special protective function (IEC 60229:2007)
LST EN 14141-2004 Valves for natural gas transportation in pipelines - Performance requirements and tests

RO-ASRO

STAS 6828-1963 Climate protection. cold test
STAS SR ISO 7257:1996 Aircraft - Hidraulyc tubing joints and fittings - Rotary flexure test

CEN - European Committee for Standardization

EN 737-3:1998 Medical Gas Pipeline Systems - Part 3: Pipelines for Compressed Medical Gases and Vacuum
EN 14594:2018 Respiratory protective devices - Continuous flow compressed air line breathing devices - Requirements@ testing and marking

National Association of Corrosion Engineers (NACE)

NACE RP0286-2002 Electrical Isolation of Cathodically Protected Pipelines Item No. 21032

Institute of Electrical and Electronics Engineers (IEEE)

IEEE Std C62.32-1981 Test specifications for low-voltage air gap surge-protective devices (excluding valve and expulsion type devices)

GM North America

GM GM6259M-2000 Low Pressure Air Injection Reactor Tubing (Revision B)

HU-MSZT

MNOSZ 4316-1955 Pressure reducer suitable for natural gas pipelines
MSZ 7048/3-1983 Public gas supply equipment, protective distance of distribution pipelines

PT-IPQ

NP 521-1988 Asbestos-cement pressure pipes Characteristics and acceptance
NP EN 12100-2001 Plastics piping systems Polyethylene(PE) valves Test method for resistance to bending between supports
NP EN 137-1989 Respiratory protective devices Self-contained open-circuit compressed air breathing apparatus. Requirements, testing, marking

(U.S.) Plastic Pipe Association

PPI TR-47-2011 Pipe Stiffness and Flattening Tests in Coilable HDPE Conduit; and Its Relationship to Burial Depth in Conduit Applications

CH-SNV

SN ISO 105/X09:1984 pipeline. Ferrous metal piping notes and guidelines. Rated pressure; working pressure; test pressure

Compressed Gas Association (U.S.)

CGA E-6-2006 STANDARD FOR HYDRAULIC TYPE PIPELINE PROTECTIVE DEVICES AS REQUIRED BY NFPA 51

Others: