pbt reduces crystallinity

pbt reduces crystallinity, Total:138 items.

The international standard classification for "pbt reduces crystallinity" includes: Other organic chemicals , Organic chemicals , Chemical analysis of metals , Iron and steel products in general , Rubber , Heat-treatable steels , Other methods of testing of metals , Cadmium, cobalt and their alloys , Aromatic hydrocarbons , Semiconducting materials , Other non-ferrous metals and their alloys , Testing of metals .

The Chinese standard classification for "pbt reduces crystallinity" includes: General organic chemicals , Metal physical property test method , Steel and iron products in general , Rubber products in general , Steel sheet and strip , Metallographic testing method , Heavy metals and their alloys analysis method , Basic organic chemicals , Other petroleum products , Elemental semiconductor material , Rare refractory metals and their compounds , Aircraft instruments , Metal chemical property test method .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 1591-1994 High strength low alloy structural steels
GB/T 4335-1984 Cold rolled low-carbon steel sheet; Ferrite grain size; Test methods
GB/T 12688.2-1990 Styrene for industrial use--Determination of purity--Crystallizing point method
GB/T 6706-1986 Determination of water content of coking phenol by cryoscopic method
GB/T 4106-1983 Determination method for secondary recrystallization temperature of tungsten wire
GB/T 6706-2005 Determination of water content of coking phenol by cryoscopic method
GB/T 4335-2013 Determination of Ferrite Grain Size for Cold Rolled Low Carbon Steel Sheets
GB/T 12832-2008 Rubber-Determination of crystallization effects by hardness measurements
GB/T 1591-2008 High Strength Low Alloy Structural Steels
GB/T 1591-2018 High strength low alloy structural steels
GB/T 2136-1980 Determination of thallium content in cadmium--Crystal violet photometric method
GB/T 12832-1991 Rubbers-Determination of crystallization effects by hardness measurements

Liaoning Provincial Standard of the People's Republic of China

DB21/T 2630-2016 Determination of Crystalline Granularity of Fused Magnesium

Professional Standard - Petrochemical Industry

SH/T 0340-1992 Determination method for crystallinity of NaY molecular sieve
SH/T 1491-1992 Determination of crystallization point of high-purity hydrocarbons

Taiwan Provincial Standard of the People's Republic of China

CNS 11109-2001 High yield strength steel plates for welded structure
CNS 9504-1982 Determination of crystal grain size of copper and copper alloys

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 41325-2022 Low density crystal originated pit polished monocrystalline silicon wafers for integrated circuit

Professional Standard - Electron

SJ 3232.4-1989 Determination method of crystallization time of low-melting welding glass powder

Professional Standard - Non-ferrous Metal

YS/T 516-2012 Determination method for secondary recrystallization temperature of tungsten wire
YS/T 516-2006 Determination method for secondary recrystallization temperature of tungsten wire

Group Standards of the People's Republic of China

T/CSCP 0035.11-2017 Laboratory Corrosion Tests on Low Alloy Structural Steels Part 11: Test Methods for Intergranular Corrosion of Low Alloy Structural Steels

工业和信息化部

SH/T 1827-2019 Plastics - Determination of crystallinity - X-ray diffractometry

Professional Standard - Aviation

HB 6677-1992 Minimum Performance Requirements for Climb Meter of Civil Aircraft

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 34481-2017 Test method for measuring etch pit density(EPD) in low dislocation density monocrystalline germanium slices

International Organization for Standardization (ISO)

ISO 19093:2018 Photography - Digital cameras - Measuring low-light performance
ISO 19093:2018/Amd 1:2020 Photography — Digital cameras — Measuring low-light performance — Amendment 1: Chroma decrease calculation
ISO 23381:2020 Determination of salt out (crystallization) temperature of liquid fertilizers
ISO 7060:1982 Caprolactam for industrial use; Determination of crystallizing point
ISO 3387:2020 Rubber — Determination of crystallization effects by hardness measurements
ISO 3387:1994 Rubber - Determination of crystallization effects by hardness measurements
ISO 3387:2012 Rubber - Determination of crystallization effects by hardness measurements
ISO 3387:1978 Rubbers; Determination of crystallization effects by hardness measurements
ISO 1599:1990 Plastics; cellulose acetate; determination of viscosity loss on moulding

SCC

MIL MIL-DTL-3922/75D-2013 Flanges, Waveguide, Reduced Height
AWWA JAW51659 Journal AWWA — Increasing Alkalinity to Reduce Turbidity
AWWA MTC61167 A New Approach to Low Pressure Membrane Filtration — Direct Coagulation Reduces Costs
DANSK DS/IEC/TR 62713:2013 Safety procedures for reduction of risk outside a structure
BS PD IEC/TR 62713:2013 Safety procedures for reduction of risk outside a structure
AWWA WQTC65792 Modifying Reservoir Operations to Reduce Turbidity
MIL MIL-F-3922/75B-1981 FLANGE, WAVEGUIDE, REDUCED HEIGHT (SUPERSEDING MIL-F-3922/75A)
AS 3568:1989 Oils for reducing the viscosity of residual bitumen for pavements
AWWA JAW17314 Journal AWWA — Reduction of Turbidity by a Coal-Aluminum Filter
AWWA JAW10080 Journal AWWA — Plumbosolvency Reduction by High pH and Low Carbonate-Solubility Relationships
AWWA ACE58090 Minimizing Energy Consumption through Valve Selection
UNE 53631:2003 Rubber. Determination of crystallization effects by hardness measurements.
NS-EN 17289-3:2020 Characterization of bulk materials — Determination of a size-weighted fine fraction and crystalline silica content — Part 3: Sedimentation method
DANSK DS/EN 17289-3:2021 Characterization of bulk materials – Determination of a size-weighted fine fraction and crystalline silica content – Part 3: Sedimentation method
AWWA ACE93056 Integrating Phase I/II/V Monitoring to Minimize Costs
AWWA ACE70848 Optimizing Pump Scheduling to Reduce Energy Costs in Water Utilities
AWWA QTC97086 The Impact on Utilities of Lowering the Filtered Water Turbidity Standard
DIN EN 17289-3 E:2019 Draft Document - Characterization of bulk materials - Determination of a sizeweighted fine fraction and crystalline silica content - Part 3: Sedimentation method; German and English version prEN 17289-3:2019

Defense Logistics Agency

DLA MIL-DTL-3922/75 D-2013 FLANGES, WAVEGUIDE, REDUCED HEIGHT
DLA MIL-DTL-3922/75 C VALID NOTICE 1-2008 FLANGES, WAVEGUIDE, REDUCED HEIGHT
DLA SMD-5962-86876 REV B-2007 MICROCIRCUIT, DIGITAL, LOW POWER SCHOTTKY TTL, UP/DOWN COUNTER, MONOLITHIC SILICON

U.S. Military Regulations and Norms

ARMY QPL-20553-9 NOTICE 1-2008 Wax, Desensitizing

Government Electronic & Information Technology Association

GEIA-GEB-0002-2003 Reducing the Risk of Tin Whisker-Induced Failures in Electronic Equipment

SAE - SAE International

SAE GEIAGEB0002-2014 Reducing the Risk of Tin Whisker-Induced Failures in Electronic Equipment
SAE AS3485-1992 Nut@ Self-Locking@ 12 Point@ Reduced Height@ Silver Plate@ UNS S66286
SAE AS3485-1993 Nut@ Self-Locking@ 12 Point@ Reduced Height@ Silver Plate@ UNS S66286 (FSC 5310)

Korean Agency for Technology and Standards (KATS)

KS C IEC 62713:2016 Safety Procedures for reduction of risk outside a structure
KS D 0069-2002 Method of determining the crystallization temperatures of amorphous metals
KS D 0069-2002(2022) Method of determining the crystallization temperatures of amorphous metals
KS C IEC 62713-2016(2021) Safety Procedures for reduction of risk outside a structure
KS D 0069-2022 Method of determining the crystallization temperatures of amorphous metals
KS D 0069-2002(2017) Method of determining the crystallization temperatures of amorphous metals
KS M ISO 3387:2009 Rubber-Determination of crystallization effects by hardness measurements
KS M ISO 3387:2014 Rubber — Determination of crystallization effects by hardness measurements
KS M ISO 3387-2019 Rubber — Determination of crystallization effects by hardness measurements
KS M ISO 3387-2014(2019) Rubber — Determination of crystallization effects by hardness measurements
KS I ISO 14592:2014 Water quality — Evaluation of the aerobic biodegradability of organic compounds at low concentrations
KS C IEC 60444-7:2016 Measurement of quartz crystal unit parameters ― Part 7: Measurement of activity and frequency dips of quartz crystal units

KR-KS

KS C IEC 62713-2016 Safety Procedures for reduction of risk outside a structure

AASHTO - American Association of State Highway and Transportation Officials

DIVISION I 3.12-1996 Reduction in Load Intensity (Interim 1999)

Japanese Industrial Standards Committee (JISC)

JIS H 7151:1991 Method of determining the crystallization temperatures of amorphous metals
JIS G 0551:1998 Methods of austenite grain size determination for steel
JIS G 0552:1998 Methods of ferrite grain determination test for steel
JIS G 0551:1977 Methods of austenite grain size test for steel
JIS G 0552:1977 Methods of ferrite grain size test for steel

British Standards Institution (BSI)

PD IEC/TR 62713:2013 Safety procedures for reduction of risk outside a structure
PD IEC/TS 62804-1:2015 Photovoltaic (PV) modules. Test methods for the detection of potential-induced degradation. Crystalline silicon
BS ISO 23381:2020 Determination of salt out (crystallization) temperature of liquid fertilizers
BS ISO 3387:2020 Rubber. Determination of crystallization effects by hardness measurements
BS ISO 3387:2012 Rubber. Determination of crystallization effects by hardness measurements
PD IEC TS 62804-1-1:2020 Photovoltaic (PV) modules. Test methods for the detection of potential-induced degradation. Crystalline silicon. Delamination
BS EN ISO 1599:1999 Plastics - Cellulose acetate - Determination of viscosity loss on moulding
BS 131-5:1965 Notched bar tests - Determination of crystallinity

CZ-CSN

CSN 65 0311-1981 Method for determination of rystallization temperature
CSN 34 6422-1961 Tests of thermal aging of varnished wires on basis of decrease of electric strength of lacquer film

(U.S.) Parachute Industry Association

PIA-C-8021B-2008 CLOTH, PARACHUTE, NYLON, CARGO AND DECELERATION

CU-NC

NC 33-67-1987 Oil Industry. Fuels for Engines Determination of Roilling Temperatures, Crystallization Start and Crystallization

GSO

GSO IEC TR 62713:2021 Safety procedures for reduction of risk outside a structure
BH GSO IEC TR 62713:2022 Safety procedures for reduction of risk outside a structure
GSO ISO 3387:2015 Rubber -- Determination of crystallization effects by hardness measurements
OS GSO ISO 3387:2015 Rubber -- Determination of crystallization effects by hardness measurements

Danish Standards Foundation

DS/ISO 1392:1986 Determination of crystallizing point — General method
DS/EN 17289-3:2021 Characterization of bulk materials – Determination of a size-weighted fine fraction and crystalline silica content – Part 3: Sedimentation method
DS/ISO 3387:1982 Rubber. Determination of crystallization effects by hardness measurements
DS/EN 60444-7:2004 Measurement of quartz crystal unit parameters - Part 7: Measurement of activity and frequency dips of quartz crystal units

RO-ASRO

SR 110-10-1998 Sugar. Methods of analysis. Determination of crystals size

Standard Association of Australia （SAA）

AS 3568:1999 Oils for reducing the viscosity of residual bitumen for pavements
AS 1733:1976 Methods for the determination of grain size in metals
AS 3568:2020 Oils for reducing the viscosity of bituminous binders for pavements

RU-GOST R

GOST R 54850-2011(2019) Roof windows and skylights. Metod for determination of reduced of thermal resistance
GOST R 54850-2011 Roof windows and skylights. Metod for determination of reduced of thermal resistance
GOST 26743.2-1991 Caprolactam for industrial use. Determination of crystallizing point
GOST 18995.5-1973 Organic chemical products. Methods for determination of freezing point

HU-MSZT

MSZ 2416-1980 Lowered Head Screw B Bartender's Accuracy
MSZ KGST 2336-1980 Determination of heat of crystallization of organic mixtures
MSZ 6019-1958 Tube type temperature measuring equipment. lowering tunnel screw
MSZ 6017-2.lap-1958 Tube type temperature measurement equipment. Eccentricity reduction equipment
MSZ 6021-1958 Tube type temperature measuring equipment. Double-sided lowering screw

American National Standards Institute （ANSI)

ANSI/GEIA STD-0005-2-A-2012 Standard for Mitigating the Effects of Tin Whiskers in Aerospace and High Performance Electronic Systems

Society of Automotive Engineers (SAE)

SAE AS3486-1992 NUT, SELF-LOCKING, 12 POINT, REDUCED HEIGHT, DRY FILM, UNS S66286

Association Francaise de Normalisation

NF U42-681:2020 Determination of salt out (crystallization) temperature of liquid fertilizers
NF ISO 23381:2020 Determination of the desolubilization (crystallization) temperature of liquid fertilizers
NF EN 17289-3:2020 Characterization of bulk materials - Determination of the size-weighted fine fraction and crystalline silica content - Part 3: sedimentation method
NF T46-027:2012 Rubber - Determination of crystallization effects by hardness measurements
NF T51-357*NF EN ISO 1599:1999 Plastics. Cellulose acetate. Determination of viscosity loss on moulding.
NF T46-027:1976 Rubbers. Determination of crystallization effects by hardness test.
NF EN ISO 1741:1994 Crystallized dextrose - Determination of mass loss on drying - Method by steaming under reduced pressure
NF ISO 3387:2020 Rubber - Determination of the effects of crystallization using hardness measurements

ZA-SANS

SANS 3387:2003 Rubber - Determination of crystallization effects by hardness measurements

(U.S.) Ford Automotive Standards

FORD S-M14J19-A-1995 THINNER, TOLUENE/XYLENE, LACQUER VISCOSITY REDUCTION

European Committee for Standardization (CEN)

prEN 926-1992 Paraglider; qualification of paragliders; structural strength tests
EN ISO 15147:2012 Light conveyor belts - Tolerances on widths and lengths of cut light conveyor belts

AENOR

UNE-ISO 3387:2013 Rubber. Determination of crystallization effects by hardness measurements.

ES-UNE

UNE-EN 17289-3:2021 Characterization of bulk materials - Determination of a size-weighted fine fraction and crystalline silica content - Part 3: Sedimentation method

German Institute for Standardization

DIN EN 17289-3:2021-02 Characterization of bulk materials - Determination of a size-weighted fine fraction and crystalline silica content - Part 3: Sedimentation method; German version EN 17289-3:2020
DIN 53541:1980 Rubber; determination of crystallization effects by hardness measurements
DIN EN ISO 1599:2000 Plastics - Cellulose acetate - Determination of viscosity loss on moulding (ISO 1599:1990); German version EN ISO 1599:1999

GOST

GOST 18995.5-2022 Organic chemical products. Methods for determination of solidification point

PL-PKN

PN C45301-08-1993 Caprolactam. Method of test. Determination of crystalizing point
PN C89425-1992 Plastics. Determination of melting temperature of semi-crystalline polymers

API - American Petroleum Institute

API PUBL 4471-1988 Treatment System for the Reduction of Aromatic Hydrocarbons and Ether Concentrations in Groundwater

YU-JUS

JUS G.S2.144-1990 Rubbers. Determination of crystallization effects by hardness measurements

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization

PREN 2922-1992 Aerospace Series Nuts@ Hexagon@ Plain@ Reduced Height@ Reduced Across Flats@ in Heat Resisting Steel@ Passivated@ Left Hand Thread Classification : 600 MPa (at Ambient Temperature) / 650 Degrees C (Edition P 1)
PREN 2922-1996 Aerospace Series Nuts@ Hexagon@ Plain@ Reduced Height@ Reduced Across Flats@ in Heat Resisting Steel@ Passivated@ Left Hand Thread Classification : 600 MPa (at Ambient Temperature) / 650 Degrees C (Edition P 2)

Others: