Can flow cytometry samples be stored overnight?

Can flow cytometry samples be stored overnight?, Total:73 items.

The international standard classification for "Can flow cytometry samples be stored overnight?" includes: Sensory analysis , Flow in closed conduits , Measurement of fluid flow , Valves in general , Test conditions and procedures in general , Measurement of electrical and magnetic quantities , Pressure regulators .

The Chinese standard classification for "Can flow cytometry samples be stored overnight?" includes: Basic standards and general methods , Flow capacity and material level instrument , Actuator , Electrochemical, thermochemistry and optical profile type analyzer , Electric energy measurement and load control system .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 17213.2-2005 Industrial-process control valves—Part 2-1:Flow capacity—Sizing equations for fluid flow under installed conditions
GB/T 19768-2005 Expression of performance sample handling systems for process analyzers
GB/T　19768-2005 Process Analyzer Sample Handling System Performance Representation
GB/T 9248-2008 Methods of evaluating the performance of flowmeters for incompressible fluids
GB/T 12314-1990 Sensory analysis method--Guidelines for the preparation of samples for which direct sensory analysis is not feasible
GB 12314-1990 Sensory analysis method-Guidelines for the preparation of samples for which direct sensory analysis is not feasible
GB/T 43716-2024 Textiles—Test method of luminated afterglow property—Luminance meter method
GB/T 9248-1988 Methods of evaluating the performance of flowmeters for incompressidle fluids
GB/T 19768-2005 Expression of performance sample handling systems for process analyzers

Professional Standard - Commodity Inspection

SN/T 2558.7-2014 Inspection method for import and export functional textiles - Part 7: Luminescence of luminous fibers

Group Standards of the People's Republic of China

T/CEEIA 393-2019 Intelligent conventional AC circuit-breaker
T/SSM 001-2019 Guide-rail DC Watt-hour Meter
T/CIEEMA 006-2022 Low energy consumption movable nucleic acid sampling room
T/FJAS 025-2023 Portable AC/DC energy storage power supply
T/QGCML 4145-2024 String energy storage converter

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 17213.2-2017 Industrial-process control valves―Part 2-1:Flow capacity―Sizing equations for fluid flow under installed conditions
GB/T 33708-2017 Static meter for direct current energy

National Metrological Verification Regulations of the People's Republic of China

JJG 842-2017 Electronic Meters for Measuring Direct-current Electrical Energy
JJG 596-2012 Electrical Meters for Measuring Alternating-current Electrical Energy

National Metrological Technical Specifications of the People's Republic of China

JJF 1245.3-2019 Program of Pattern Evaluation of Fixed AC Electricity Meters--Reactive Electrical Energy Meters
JJF 1245.5-2019 Program of Pattern Evaluation of Fixed AC Electricity Meters--Functional Requirements
JJF 1245.1-2019 Outline of Type Evaluation of Installed AC Energy Meter-Active Energy Meter

Professional Standard - Ocean

HY/T 0404-2024 Process control specification of sea testing for tidal energy devices and wave energy devices

未注明发布机构

ASTM RR-F17-1054 2015 F1802-Test Method for Performance Testing of Excess Flow Valves

Henan Provincial Standard of the People's Republic of China

DB41/T 1702-2018 Code of practice for the collection of pig blood samples and tissue samples

Association Francaise de Normalisation

NF C46-225*NF EN 61115:1994 Expression of performance of sample handling systems for process analyzers.
NF C46-507*NF EN 60534-2-5:2004 Industrial-process control valves - Part 2-5 : flow capacity - Sizing equations for fluid flow through multistage control valves with interstage recovery
NF ISO 22514-8:2014 Statistical methods in process management - Capability and performance - Part 8: machine capability of a multimodal production process
NF EN 16842-8:2021 Self-propelled industrial trucks - Visibility - Test methods and verification - Part 8: stand-up cantilever trucks with a capacity up to and including 10,000 kg
NF V09-005:1982 Sensory analysis. Methodology. Guidelines for the preparation of samples for which direct sensory analysis is not feasible .

Korean Agency for Technology and Standards (KATS)

KS C 4608-1980(2010) INDUCTION TYPE OVERCURRENT RELAY FOR 6.6KV OR 3.3KV RECEIVING
KS Q ISO 5497-2003(2018) Sensory testing - Methodology - Guidelines for preparing samples for which direct sensory testing is not possible
KS C IEC 60534-2-5:2004 Industrial-process control valves-Part 2-5:Flow capacity-Sizing equations for fluid flow through multistage control valves with interstage recovery
KS Q ISO 5497:2003 Sensory analysis - methodology－Guideline for the preparation of samples for which direct sensory analysis is not feasible

SCC

CEI EN 61115:1998 Expression of performance of sample handling systems for process analyzers
DANSK DS/EN 61115:1994 Expression of performance of sample handling systems for process analyzers
CAN/CSA Z94.4.1-2021 Performance of filtering respirators
AWWA MTC50264 Impact of Membrane Sample Variability on the Performance of the Rapid Bench-Scale Membrane Test
UNE-EN ISO 6644:2007 Flowing cereals and milled cereal products - Automatic sampling by mechanical means (ISO 6644:2002)
NS-EN ISO 6644:2007 Flowing cereals and milled cereal products — Automatic sampling by mechanical means (ISO 6644:2002)
ISO/DIS 14530-2:1997 Plastics - Free-Flowing Unsaturated-Polyester (UP) Compression- and Injection-Moulding Materials - Part 2: Preparation of Test Specimens and Determination of Properties
CEI UNEL 35024:2020 Electric cables insulated with elastomeric or thermoplastic material for nominal voltages not exceeding 1,000 V in alternating current and 1,500 V in direct current Current carrying capacity in permanent conditions for installation in the air
CEI UNEL 35024/1:1997 Electric cables insulated with elastomeric or thermoplastic material for nominal voltages not exceeding 1000 V in alternating current and 1500 V in direct current - Current carrying capacity in permanent regime for installation in air
05/30130735 DC ISO 21129. Hygrothermal performance of building materials and products. Determination of water vapour transmission properties. Box methods

GSO

GSO IEC 61115:2014 Expression of performance of sample handling systems for process analyzers
BH GSO IEC 61115:2016 Expression of performance of sample handling systems for process analyzers
GSO ISO 5538:2015 Milk and milk products -- Sampling -- Inspection by attributes

British Standards Institution (BSI)

BS EN 61115:1994(2000) Expression of performance of sample handling systems for process analyzers
BS EN 61115:1994 Expression of performance of sample handling systems for process analyzers
BS EN 60534-2-5:2003 Industrial-process control valves - Flow capacity - Sizing equations for fluid flow through multistage control valves with interstage recovery
BS EN ISO 6644:2007 Flowing cereals and milled cereal products — Automatic sampling by mechanical means

International Electrotechnical Commission (IEC)

IEC 60534-2-1:2011 Industrial-process control valves - Part 2-1: Flow capacity - Sizing equations for fluid flow under installed conditions
IEC 60534-2:1978 Industrial-process control valves. Part 2: Section one - Sizing equations for incompressible fluid flow under installed conditions
IEC 60534-2-5:2003 Industrial-process control valves - Part 2-5: Flow capacity; Sizing equations for fluid flow through multistage control valves with interstage recovery
IEC 60534-2-1/COR1:2000 Industrial-process control valves - Part 2-1: Flow capacity - Sizing equations for fluid flow under installed conditions; Corrigendum 1
IEC 60534-2-1:1998 Industrial-process control valves - Part 2-1: Flow capacity - Sizing equations for fluid flow under installed conditions
IEC 61115:1992 Expression of performance of sample handling systems for process analyzers

ES-UNE

UNE-EN 61115:1993 EXPRESSION OF PERFORMANCE OF SAMPLE HANDLING SYSTEMS FOR PROCESS ANALYZERS. (Endorsed by AENOR in April of 1996.)

American National Standards Institute （ANSI)

ANSI/ISA 75.01.01-2012 Industrial-Process Control Valves - Part 2-1: Flow capacity - Sizing equations for fluid flow under installed conditions

JP-JASO

JASO Z003-2007 Forms for automobile performance diagram

Lithuanian Standards Office

LST EN 61115-2001 Expression of performance of sample handling systems for process analyzers (IEC 61115:1992)

German Institute for Standardization

DIN EN 61115:1994-08 Expression of performance of sample handling systems for process analyzers (IEC 61115:1992); German version EN 61115:1993
DIN EN 61115:1994 Expression of performance of sample handling systems for process analyzers (IEC 61115:1992); German version EN 61115:1993
DIN 743 Bb.1:2000 Shafts and axles, calculation of load capacity - Examples

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc.

ASHRAE 4626-2003 Effects of Improper Product Loading on the Performance of an Open Vertical Meat Display Case
ASHRAE TO-98-9-1-1998 Effect of Airflow Nonuniformity on Evaporation Performance

Defense Logistics Agency

DLA A-A-50549-1996 HEATERS, WATER, LIQUID FUEL (OIL-FIRED, STORAGE TYPE, NOT EXCEEDING 280,000 BTU/H INPUT CAPACITY)
DLA A-A-50549 VALID NOTICE 1-2005 HEATERS, WATER, LIQUID FUEL (OIL-FIRED, STORAGE TYPE, NOT EXCEEDING 280,000 BTU/H INPUT CAPACITY)

NO-SN

NS 7021-1978 Description pattern for screws, special features

International Organization for Standardization (ISO)

ISO 5497:1982 Sensory analysis; Methodology; Guidelines for the preparation of samples for which direct sensory analysis is not feasible

American Society for Testing and Materials (ASTM)

ASTM D7750-23 Standard Test Method for Cure Behavior of Thermosetting Resins by Dynamic Mechanical Procedures using an Encapsulated Specimen Rheometer

Japanese Industrial Standards Committee (JISC)

JIS B 2005-2-1:2019 Industrial-process control valves -- Part 2-1: Flow capacity -- Sizing equations for fluid flow under installed conditions
JIS B 2005-2-1:2005 Industrial-process control valves -- Part 2-1: Flow capacity -- Sizing equations for fluid flow under installed conditions

Others: