stencil

stencil, Total:200 items.

The international standard classification for "stencil" includes: Moulding equipment .

The Chinese standard classification for "stencil" includes: Mould , Casting , Technical management , Moulds .

Professional Standard - Machinery

JB/T 7644.6-1994 Die Single Punch Template Ball Lock Single Punch Backing Plate
JB/T 7646.2-2008 Stamping die shanks-Part 2:Screwed die shanks
JB/T 7646.4-2008 Stamping die shanks-Part 4:Slotted die shanks
JB/T 7644.1-1994 Die single punch template single punch fixed plate
JB/T 7644.4-2008 Single punch plates of stamping dies-Part4:Bolster plates for side-fixed single punches
JB/T 5830-1991 Die round die
JB/T 7646.5-1994 Die handle Floating die handle
JB/T 7643.4-1994 Die template circular concave template
JB/T 7646.3-2008 Stamping die shanks-Part 3:Flanged die shanks
JB/T 5830-2008 Stamping dies-Round dies
JB/T 7184.1-1995 Stamping die steel plate die sets Back guide post lower die sets
JB/T 7184.4-1995 Stamping die steel plate die sets Four-guide-pillar die sets
JB/T 7644.4-1994 Punching die single punch template partial installation single punch backing plate
JB/T 7186.1-1995 Rolling guide steel-plate die base of stamping dies Back pillar upper die sets
JB/T 7184.2-1995 Stamping die steel plate die sets Diagonal pillar die sets
JB/T 7644.5-2008 Single punch plates of stamping dies-Part5:Retaining plates for ball-locked single punches
JB/T 7646.6-2008 Stamping die shanks-Part 6:Pushed-in movable die shanks
JB/T 7182.1-1995 Rolling Guide Steel-plate Die Sets of Stamping Dies Back Pillar (Post) Mould Bases
JB/T 7644.3-1994 Punching die single punch template partial installation single punch fixed plate
JB/T 7644.6-2008 Single punch plates of stamping dies-Part6:Bolster plates for ball-locked single punches
JB/T 7644.1-2008 Single punch plates of stamping dies-Part1:Retaining plates for single punches
JB/T 7646.1-2008 Stamping die shanks-Part 1:Press-fit die shanks
JB/T 7646.3-1994 Die Shank Flange Die Shank
JB/T 7643.5-1994 Die template circular fixing plate
JB/T 7644.2-2008 Single punch plates of stamping dies-Part2:Bolster plates for single punches
JB/T 6962.1-1993 Forging Die for Mechanical Press Machines Die Holders
JB/T 7643.3-1994 Die template rectangular backing plate
JB/T 5105-1991 Casting Form Pattern Draft
JB/T 7644.8-1994 Punching die single punch formwork partial loading ball locking single punch backing plate
JB/T 7181.1-1995 Sliding Guide Steel-plate Die Sets of Stamping Dies Back Pillar (Post) Mould Bases
JB/T 5110.5-1992 Screw Press Die Die Base Used for Rectangular Die Blocks
JB/T 7184.3-1995 Stamping die steel plate die sets Center pillar die sets
JB/T 7644.2-1994 Die Single Punch Template Single Punch Backing Plate
JB/T 7646.6-1994 Die handle push type movable die handle
JB/T 5829-1991 Die Ball Locking Round Punch
JB/T 7644.8-2008 Single punch plates of stamping dies-Part8:Bolster plates for ball-locked side-fixed single punches
JB/T 7181.2-1995 Sliding Guide Steel-plate Die Sets of Stamping Dies Diagonal Guide Pillar Die Carrier
JB/T 7644.5-1994 Punch die single punch template ball lock single punch fixed plate
JB/T 7646.1-1994 Die handle Press-in type die handle
JB/T 7182.4-1995 Rolling Guide Steel-plate Die Sets of Stamping Dies Four-guide-pillar (Post) Mould Bases
JB/T 7644.3-2008 Single punch plates of stamping dies-Part3:Retaining plates for side-fixed single punches
JB/T 7646.5-2008 Stamping die shanks-Part 5:Self-centering die shanks
JB/T 7644.7-2008 Single punch plates of stamping dies-Part7:Retaining plates for ball-locked side-fixed single punches
JB/T 7181.4-1995 Sliding Guide Steel-plate Die Sets of Stamping Dies Four-guide-pillar (Post) Mould Bases
JB/T 5111.2-2015 Upset forging dies.Components.Part 2: Concave die blocks
JB/T 7646.2-1994 Die handle screw-in die handle
JB/T 7643.1-1994 Die Template Rectangular Concave Template
JB/T 7644.7-1994 Punching die single punch template partial loading ball locking single punch fixed plate
JB/T 5110.4-1992 Screw Press Die Die Base Used for Round Die Blocks

Professional Standard - Electron

SJ/T 10339.7-1993 Anti friction bearing die sets of fine blanking die with fixed punch-Diagonal pillar sets
SJ/T 10341.35-1993 Plates of fine blanking die-Round backing plates
SJ/T 10341.19-1993 Holders for anti-friction bearing die sets of fine blanking die with sliding punch-Die holders of center pillar set for inlay die plate
SJ/T 10341.12-1993 Holders for anti-friction bearing die sets of fine blanking die with sliding punch-Die holders of diagonal pillar set for inlay die plate
SJ 2639.1-1985 Cold press dies - Round die buttons
SJ/T 10341.30-1993 Plates of fine blanking die-Taper die plates
SJ/T 10341.11-1993 Holders for anti-friction bearing die sets of fine blanking die with sliding punch-Punch holders of diagonal pillar set for inlay die plate
SJ 2638.6.1-1985 Cold press dies - Moving shank
SJ/T 10339.5-1993 Anti friction bearing die sets of fine blanking die with sliding punch - Diagonal pillar sets for inlay die plate
SJ/T 10341.20-1993 Holders for anti - Friction bearing die sets of fine blanking die with sliding punch-Punch holders of center pillar set for laid die plate
SJ/T 10339.9-1993 Anti friction bearing die sets of fine blanking die with sliding punch - Center pillar sets for laid die plate
SJ 3060.4-1988 General die sets for blanking die-Retaining plate of punch
SJ/T 10341.15-1993 Holders for anti - Friction bearing die sets of fine blanking die with fixed punch-Punch holders of diagonal pillar set
SJ 2640.1-1985 Cold press dies-Round punch
SJ/T 10339.11-1993 Anti friction bearing die sets of fine blanking die with fixed punch-Four pillar sets
SJ 3066-1988 General die sets for blanking die-Diagonal pillar pin
SJ 3060.1-1988 General die sets for blanking die - Retaining plate of punch
SJ 2640.3-1985 Cold press dies - Round punch
SJ/T 10341.23-1993 Holders for anti-friction bearing die sets of fine blanking die with fixed punch-Die holders pillar set
SJ/T 10341.43-1993 Punches of fine blanking die-Piercing punches
SJ/T 10341.17-1993 Holders for anti - Friction bearing die sets of fine blanking die with fixed punch - Shroud rings for pressure plate of diagonal pillar set
SJ/T 10341.4-1993 Holders for sliding guide die sets of fine blanking die with sliding punch - Die holders of diagonal pillar set for inlay laid plate
SJ/T 10341.22-1993 Holders for anti - Friction bearing die sets of fine blanking die with fixed punch-Punch holder of center pillar set
SJ 3060.2-1988 General die sets for blanking die - Retaining plate of punch
SJ 2638.5-1985 Cold press dies-Slotted shank
SJ/T 10341.27-1993 Holders for anti-friction bearing die sets of fine blanking die with fixed punch-Shroud holder for pressure plate of four-pillar set
SJ/T 10341.31-1993 Plates of fine blanking die-Round die plates
SJ/T 10341.10-1993 Holders for sliding guide die sets of fine blanking die with fixed punch - Shroud rings for pressure plate of center pillar set
SJ/T 10341.25-1993 Holders for anti-friction bearing die sets of fine blanking die with fixed punch-Punch holders of four-pillara set
SJ 2640.2-1985 Cold press dies - Round punch
SJ 3058.5-1988 General die sets for blanking die - Backing plate
SJ 2638.4-1985 Cold press dies - Flanged shank
SJ/T 10341.26-1993 Holders for anti - Friction bearing die sets of fine blanking die with fixed punch - Die holders of four-pillar set
SJ/T 10341.3-1993 Holders for sliding guide die sets of fine blanking die with sliding punch-Punch holders of diagonal pillar set for laid die plate
SJ/T 10339.6-1993 Anti friction bearing die sets of fine blanking die with sliding punch-Diagonal pillar sets for laid die plate
SJ 3112-1988 Cold press dies - Punch holder for cross feeding of Ⅰ-type fixed guide plate
SJ/T 10341.13-1993 Holders for anti-friction bearing die sets of fine blanking die with sliding punch-Punch holders of diagonal pillar set for laid die plate
SJ/T 10341.7-1993 Holders for sliding guide die sets of fine blanking die with fixed punch-Shroud rings for pressure plate of diagonal pillar set
SJ/T 10341.28-1993 Plates of fine blanking die-Square die plates
SJ 3115-1988 Cold press dies-Punch holder of guide plate
SJ 3117-1988 Cold press dies-General holder for fixed guide stripper
SJ 2638.2-1985 Cold press dies - Screwed shank
SJ 2633-1985 Cold press dies - Hooks for die sets
SJ 3086.1-1988 General die sets for blanking die-Round punch
SJ/T 10339.4-1993 Sliding guide die sets of fine blanking die with fixed punch-Center pillar sets
SJ/T 10339.2-1993 Sliding guide die sets of fine blanking die with sliding punch - Diagonal pillar sets for laid die plate
SJ/T 10341.21-1993 Holders for anti - Friction bearing die sets of fine blanking die with sliding punch - Die holders of center pillar set for laid die plate
SJ/T 10341.8-1993 Holders for sliding guide die sets of fine blanking die with fixed punch-Punch holders of center pillar set
SJ 3060.5-1988 General die sets for blanking die - Retaining plate of punch
SJ/T 10339.3-1993 Sliding guide die sets of fine blanking die with fixed punch - Diagonal pillar sets
SJ/T 10338-1993 Technical specification of fine blanking die set
SJ 3060.3-1988 General die sets for blanking die - Retaining plate of punch
SJ/T 10341.36-1993 Plates of fine blanking die-Adjusting plates
SJ 2638.3-1985 Cold press dies - Riveting shank
SJ 3106-1988 Cold press dies-Die holder for center pillar of spring guide stripper
SJ/T 10341.16-1993 Holders for anti-friction bearing die sets of fine blanking die with fixed punch-Die holders of diagonal pillar set
SJ 3086.2-1988 General die sets for blanking die-Round punch
SJ/T 10341.1-1993 Holders for sliding guide die sets of fine blanking die with sliding punch-Punch holders of diagonal pillar sets for inlay die plate
SJ/T 10341.5-1993 Holders for sliding guide die sets of fine blanking die with fixed punch-Punch holders of diagonal pillar set
SJ 995-1975 Double acting drawing die on press-Blanking matrix-Drawing matrix
SJ 3095-1988 Technical specification of cold press die sets
SJ/T 10341.9-1993 Holders for sliding guide die sets of fine blanking die with fixed punch - Die holders of center pillar set
SJ/T 10339.1-1993 Sliding guide die sets of fine blanking die with sliding punch-Diagonal pillar sets for inlay die plate
SJ/T 10341.24-1993 Holders for anti-friction bearing die sets of fine blanking die with fixed punch-Shroud rings for pressure of center pillar set
SJ/T 10339.8-1993 Anti friction bearing die sets of fine blanking die with sliding punch - Center pillar sets for inlay die plate
SJ/T 10341.29-1993 Plates of fine blanking die-Rectangular die plates
SJ/T 10339.10-1993 Anti friction bearing die sets of fine blanking die with fixed punch-Center pillar sets
SJ 2634.4-1985 Cold press dies - Rectangular matrix plates
SJ/T 10341.6-1993 Holders for sliding guide die sets of fine blanking die with fixed punch-Die holders of diagonal pillar set
SJ 3084-1988 General die sets for blanking die - Matrix plate

Professional Standard - Aerospace

QJ 2514.5-1993 Cold stamping die template circular concave template
QJ 2515.2-1993 Cold stamping die punch B type round punch
QJ 2517.1-1993 Cold stamping die general template A type general template
QJ 2514.1-1993 Cold stamping die template Rectangular concave template
QJ 1764.7-1989 Template in rubber mold parts
QJ 2515.1-1993 Cold stamping die punch A type round punch
QJ 1764.1-1989 Rubber mold part template
QJ 2517.2-1993 Cold stamping die general template B type general template

Taiwan Provincial Standard of the People's Republic of China

CNS 6545-1980 Master template for plastic molds
CNS 5989-1985 Punch Holder and Die Holder for Press Dies
CNS 5990-1987 Die Sets for Press Dies

Professional Standard - Railway

TB 1540.1-1984 Cold Die Shank Flange Die Shank
TB 1541.26-1984 Concave and convex die device of cold stamping die and die fixed plate δ≤3
TB 1541.25-1984 Cold stamping die concave and convex die device square concave die δ≤6
TB 1541.15-1984 Concave and convex die device for cold stamping die δ=6~12
TB 1541.24-1984 Cold stamping die concave and convex die device square punch δ≤6
TB 1541.27-1984 Concave and punch device of cold stamping die and die fixing plate δ≤6
TB 1541.21-1984 Concave and convex die device with shoulder circular punch for cold stamping die
TB 1541.5-1984 Cold stamping die concave and convex die device circular concave die
TB 1540.6-1984 Cold stamping die handle Movable die handle
TB 1540.4-1984 Cold stamping die shank die shank joint
TB 1540.2-1984 Cold Die Shank Threaded Die Shank
TB 1541.1-1984 Rectangular concave die for cold stamping die and convex die device
TB 1538.3-1984 Diagonal guide column upper formwork of cold die formwork
TB 1541.20-1984 Cold stamping die concave and convex die device Round concave die δ≤3
TB 1538.2-1984 Cold stamping die formwork rear side guide column lower formwork
TB 1541.16-1984 Cold stamping die concave and convex die device quick punch (Type I)
TB 1541.23-1984 Cold stamping die concave and convex die device oblong concave die δ≤6
TB 1538.6-1984 Cold stamping die formwork Diagonal rolling guide column upper formwork
TB 1538.1-1984 Rear side guide column upper template of cold stamping die template

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 2852.2-1990 Ball slide die sets for press tools-Center pillar sets
GB/T 2856.4-1990 Holder for ball slide die sets for press tools-Die holder for center pillar sets
GB/T 2852.3-1990 Ball slide die sets for press tools--Four pillar die sets
GB/T 2852.4-1990 Ball slide die sets for press tools--Back pillar die sets
GB/T 2856.6-1990 Holder for ball slide die sets for press tools--Die holder for four pillar sets
GB/T 12555.4-1990 Injection mould for plastic large-size mould bases--Mould plates
GB/T 2855.13-1990 Holder for sliding guide die sets for press tools--Punch holder for four pillar sets
GB/T 2856.7-1990 Holder for ball silde die sets for press tools--Punch holder for back pillar sets
GB/T 44530-2024 Die casting dies—Die sets
GB/T 2852-2008 Ball-bearing die sets for stamping dies
GB/T 2855.1-1990 Holder for sliding guide die sets for press tools--Punch holder for diagonal pillar sets
GB/T 2856.8-1990 Holder for ball slide die sets for press tools--Die holder for back pillar sets
GB/T 2852.1-1990 Ball slide die sets for press tools--Diagonal pillar sets
GB/T 2856.5-1990 Holder for ball slide die sets for press tools-Punch holder for four pillar sets
GB/T 2855.9-1990 Holder for sliding guide die sets for press diess tools--Punch holder for center pillar sets
GB/T 2851.7-1990 Sliding guide die sets for press tools--Four pillar die sets
GB/T 2856.2-1990 Holder for ball slide die sets for press tools--Die holder for diagonal pillar sets
GB/T 2851.3-1990 Sliding guide die sets for press tools--Back pillar sets
GB/T 2855.2-2008 Holders for sliding guide die sets for stamping dies - Part 2: Die holders for die sets
GB/T 2851-2008 Sliding guide die sets for stamping dies
GB/T 2855.1-2008 Holders for sliding guide die sets for stamping dies - Part 1: Punch holders for die sets
GB/T 2856.3-1990 Holder for ball silde die sets for press tools-Punch holder for center pillar sets
GB/T 2855.5-1990 Holder for sliding guide die sets for press tools-Punch holder for back pillar sets
GB/T 2855.6-1990 Holder for ball slide die sets for press tools-Die holder for back pillar sets
GB/T 2851.5-1990 Sliding guide die sets for press tools--Center pillar sets
GB/T 12555.1-1990 Injection mould for plastic large-size mould bases --Standard mould bases
GB/T 2855.14-1990 Holder for silding guide die sets for press tools--Die holder for four pillar sets
GB/T 12555-2006 Injection mould bases for plastics
GB/T 2856.2-2008 Holders for ball-bearing die sets for stamping dies - Part 2: Die holders for die sets
GB/T 2856.1-2008 Holders for ball-bearing die sets for stamping dies - Part 1: Punch holders for die sets
GB/T 2855.10-1990 Holder for ball slide die sets for press tools--Die holder for center pillar sets
GB/T 2851.1-1990 Sliding guide die sets for press tools--Diagonal pillar sets
GB/T 23562.4-2009 Steel-plate die holders of stamping dies—Part 4:Four-pillar die holders

Professional Standard - Business

SB/T 10115-1992 Ring Die Granulator Compression Mold

Group Standards of the People's Republic of China

T/ZZB 2531-2021 Injection mould bases for plastics
T/KSMA 001-2019 Piercing Punches of Stamping Dies for Thick Plate

Professional Standard - Aviation

HB 7353.5-1996 Interchangeable Parts of Bent Pipe Mould - Slip Form
HB 1936-1990 Lower die base of cast iron mold for cold-punching mould center pillars
HB 2164-1992 Movable Compression Mold Framework
HB/Z 150-1989 Die body combination die assembly
HB 2163-1992 Movable Compression Mold Framework
HB 809-1990 Upper die base of steel mold for cold-punching mould center pillars
HB 807-1990 Upper die base of steel mold for guide pillars after cold-punching mould
HB 1932-1990 Lower die base of cast iron mold for guide pillars after cold-punching mould
HB 4415-1990 Lower die base of steel mold for four guide pillars of cold-punching mould
HB 4414-1990 Upper die base of steel mold for four guide pillars of cold-punching mould
HB 4561-1992 Fixed Compression Mold Base
HB 808-1990 Lower die base of steel mold for cold-punching mould center pillars
HB 4413-1990 Cold die diagonal guide pillar steel frame lower die base
HB 1933-1990 Upper die base of cast iron mold for guide pillars after cold-punching mould
HB 4562-1992 Fixed compression mold base

Others: stencil,Flow template,13th Five-Year Evaluation Template,Multiple templates