Standard dilution water

Standard dilution water, Total:274 items.

The international standard classification for "Standard dilution water" includes: Solvents , Water quality , Paints and varnishes , Radiation measurements , Sterilization and disinfection , Medical Sciences and health care facilities in general .

The Chinese standard classification for "Standard dilution water" includes: Coating auxiliary materials , Analysis methods for toxic substances in water , Coating , Ionizating Radiation Measurement , , Sanitation in general .

Professional Standard - Medicine

YY 91104-1999 Diluter

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 1751-1992 Determination of water of thinners and retarders
GB/T 7488-1987 Water quality; Determination of biochemical oxygen demand after 5 days(BOD5); Dilution and seeding method

Professional Standard - Chemical Industry

HG/T 3380-2003 Thiner for amino paint
HG/T 3378-1987 Thinner For Nitrocellulose Lacquer
HG/T 3380-1987 Thiner for amino paint
HG/T 3858-2006 Determination of water of thinners and retarders
HG/T 3378-2003 Thiner for nitrocellulose lacquer

National Metrological Technical Specifications of the People's Republic of China

JJF 2066-2023 Calibration Specification for Aerosol Diluters
JJF 1267-2010 Primary method of isotope dilution mass spectrometry

Professional Standard - Environmental Protection

HJ 1182-2021 Water quality—Determination of colority—Dilution level method
HJ 505-2009 Water Quality - Determination of Biochemical Oxygen Demand after 5 Days (BOD5) for Dilution and Seeding Method

Professional Standard - Urban Construction

CJ 26.4-1991 Municipal sewage water quality inspection method standard Five-day determination of biochemical oxygen demand Dilution and inoculation method

Group Standards of the People's Republic of China

T/QGCML 3904-2024 Mixing and diluting device for shampoo production
T/HEBQIA 114-2022 Alkyd thinner
T/HEBQIA 062-2022 Alkyd thinner

Taiwan Provincial Standard of the People's Republic of China

CNS 554-1986 Lacquer Thinner
CNS 3233-1980 Dope Thinner
CNS 10447-1983 Solvent Diluted Pust Preventive Oil

卫生健康委员会

WS/T 798-2022 Qualitative testing standard on disinfection effect of disinfectant——use dilution method

Professional Standard - Hygiene

WS/T 411-2024 Standards for antifungal susceptibility testing of filamentous fungi Broth dilution method
WS/T 421-2024 Standards for antifungal susceptibility testing of yeasts-Broth dilution method

工业和信息化部

HG/T 3378-2022 Thinner for coatings

Professional Standard - Agriculture

JJF 2109-2024 Technical Requirements for Reference Material Characterization―Organic Isotope Dilution Mass Spectrometry

Professional Standard - Petroleum

SY/T 0532-1993 Bacteria analysis method for oil field injection water extinction dilution method

Korean Agency for Technology and Standards (KATS)

KS M 0120-2009 General rule for dilution methods of standard solutions
KS M 0120-2019 General rule for dilution methods of standard solutions
KS M 2202-2021 Cutback asphalt
KS M 2202-2016(2021) Cutback asphalt
KS M 2202-2016 Cutback asphalt
KS M 5469-1984 Test methods for THE DILUTABILITY and DILUTABILITY stability OF paint
KS M 5554-1984 Standard Test Method for Acidity in solvent, Thinner for lacquer
KS M 5803-1983 Thinner for Primer paint
KS M 6060-2005 Thinner for organic coating materials
KS M 6060-2019 Thinner for organic coating materials
KS M 2212-2016(2021) Corrosion preventive oils solvent dilution
KS M 6060-2014 Thinner for organic coating materials
KS M 2212-2011 Corrosion preventive oils solvent dilution

GSO

GSO ASTM D61:2009 Standard Test Method for Softening Point of Pitches (Cube-in-Water Method)
GSO 651:2021 Standard for cream and prepared creams
BH GSO 651:2022 Standard for cream and prepared creams

(U.S.) Ford Automotive Standards

FORD WSA-M62J31-A-1992 ENAMEL, WATER REDUCED
FORD ESK-M14J512-A2-1988 THINNER Shown on ESK-M14J512-A1
FORD ESK-M14J250-A2-1990 THINNER (Shown on ESK-M14J250-A)
FORD SK-M14J9561-C-1995 THINNER (Shown on SK-M14J9561-A)
FORD SK-M14J9561-B-1995 THINNER (Shown on SK-M14J9561-A)
FORD M14J147-1991 ALIPHATIC HYDROCARBON THINNERS (Shown on M14J100A)
FORD WSS-M14J521-A2-1998 PURGE THINNER (Shown on WSS-M14J521-A1)
FORD SK-M14J9561-D-1995 THINNER, RECYCLING BASECOAT, SOLID COLOUR AND CLEARCOAT, DILUTION OF PAINT (Shown on SK-M14J9561-A)
FORD M14J136-A-1991 ALIPHATIC HYDROCARBON THINNERS Shown on M14J100-A
FORD M14J208-1991 AROMATIC HYDROCARBON THINNERS (Shown on M14J200-A SEE SCOPE)
FORD M14J167-A-1991 ALIPHATIC HYDROCARBON THINNERS Shown on M14J100-A
FORD M14J148-1991 ALIPHATIC HYDROCARBON THINNERS (Shown on M14J100-A)
FORD SK-M14J9561-A-1995 THINNER
FORD M14J220-1991 AROMATIC HYDROCARBON THINNERS (Shown on M14J200-A SEE SCOPE)
FORD ESK-M14J512-A1-1988 THINNER
FORD SK-M14J9550-C-1994 THINNER
FORD SK-M14J9573-B-1994 THINNER
FORD M14J217-1991 AROMATIC HYDROCARBON THINNERS (Shown on M14J200-A SEE SCOPE)
FORD S-M14J4500-A-1994 THINNER
FORD M14J242-1991 AROMATIC HYDROCARBON THINNERS (Shown on M14J200-A SEE SCOPE)
FORD ESK-M14J233-A-1994 THINNER
FORD SK-M14J9571-A-1994 THINNER
FORD S-M14J210-A-1994 THINNER
FORD ESK-M14J250-A-1990 THINNER
FORD SK-M14J9571-B-1994 THINNER
FORD WSK-M14J243-A-1990 THINNER
FORD M14J210-1991 AROMATIC HYDROCARBON THINNERS (Shown on M14J200-A SEE SCOPE)
FORD M14J245-1991 AROMATIC HYDROCARBON THINNERS (Shown on M14J200-A SEE SCOPE)
FORD ESB-M99J371-A1-2006 TRANSIT COATING, ACRYLIC, WATER REDUCIBLE ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M14J519-A-1998 FADE OUT THINNER
FORD M14J200-A-1991 AROMATIC HYDROCARBON THINNERS
FORD ESF-M5B217-A-2002 ANTI-STATIC SOLUTION - DILUTE ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M14J521-A1-1998 PRIMER THINNER
FORD ESK-M14J229-A-1994 THINNER, FOR BASECOAT
FORD WSS-M14J520-A-1998 RETARDER THINNER
FORD ESF-M5B217-A2-2002 ANTI-STATIC SOLUTION - DILUTE ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on ESF-M5B217-A
FORD M14J504-A-1990 THINNER - EXEMPT ENAMEL
FORD M14J100-A-1991 ALIPHATIC HYDROCARBON THINNERS
FORD ESB-M99C108-A-2004 LUBRICANT, DRY FILM - COMPLEX STEARATE BASE - WATER REDUCED - AIR DRY ***TO BE USED WITH FORD WSS-M99P1111-A***

American Society for Testing and Materials (ASTM)

ASTM D2026-97(2010) Standard Specification for Cutback Asphalt (Slow-Curing Type)
ASTM D2026/D2026M-97(2010)e1 Standard Specification for Cutback Asphalt (Slow-Curing Type)
ASTM D2027/D2027M-10 Standard Specification for Cutback Asphalt (Medium-Curing Type)
ASTM E788-97(2008) Standard Specification for Pipet, Blood Diluting
ASTM D2027/D2027M-13 Standard Specification for Cutback Asphalt (Medium-Curing Type)
ASTM E788-97(2013) Standard Specification for Pipet, Blood Diluting
ASTM E788-97(2003) Standard Specification for Pipet, Blood Diluting
ASTM E788-97(2019) Standard Specification for Pipet, Blood Diluting
ASTM D2028-97 Standard Specification for Cutback Asphalt (Rapid-Curing Type)
ASTM D2028/D2028M-10 Standard Specification for Cutback Asphalt (Rapid-Curing Type)
ASTM E788-97 Standard Specification for Pipet, Blood Diluting
ASTM D2028-97(2004) Standard Specification for Cutback Asphalt (Rapid-Curing Type)
ASTM D2027/D2027M-19(2024) Standard Specification for Cutback Asphalt (Medium-Curing Type)
ASTM D4627-92(1997) Standard Test Method for Iron Chip Corrosion for Water-Dilutable Metalworking Fluids
ASTM D402/D402M-24 Standard Test Method for Distillation of Cutback Asphalt
ASTM D2399-12 Standard Practice for Selection of Cutback Asphalts
ASTM D2026/D2026M-15(2021)e1 Standard Specification for Cutback Asphalt (Slow-Curing Type)
ASTM D2399-21 Standard Practice for Selection of Cutback Asphalts
ASTM D3946-92(1997) Standard Test Method for Evaluating the Bacteria Resistance of Water-Dilutable Metalworking Fluids
ASTM D2028/D2028M-15 Standard Specification for Cutback Asphalt (Rapid-Curing Type)
ASTM D2026/D2026M-15 Standard Specification for Cutback Asphalt (Slow-Curing Type)
ASTM D2028/D2028M-15(2021)e1 Standard Specification for Cutback Asphalt (Rapid-Curing Type)
ASTM D402/D402M-14 Standard Test Method for Distillation of Cutback Asphalt
ASTM D1617-22 Standard Test Method for Ester Value of Solvents and Thinners
ASTM D402-08 Standard Test Method for Distillation of Cutback Asphaltic (Bituminous) Products
ASTM D1617-90(2001) Standard Test Method for Ester Value of Solvents and Thinners
ASTM D1617-07 Standard Test Method for Ester Value of Solvents and Thinners
ASTM D322-97(2012)e1 Standard Test Method for Gasoline Diluent in Used Gasoline Engine Oils by Distillation
ASTM D1617-07(2012) Standard Test Method for Ester Value of Solvents and Thinners
ASTM D1617-90(1996) Standard Test Method for Ester Value of Solvents and Thinners
ASTM D5969-21 Standard Test Method for Corrosion-Preventive Properties of Lubricating Greases in Presence of Dilute Synthetic Sea Water Environments
ASTM D402-97 Standard Test Method for Distillation of Cut-Back Asphaltic (Bituminous) Products
ASTM D2857-95(2001) Standard Practice for Dilute Solution Viscosity of Polymers
ASTM D2857-95 Standard Practice for Dilute Solution Viscosity of Polymers
ASTM D402-02 Standard Test Method for Distillation of Cut-Back Asphaltic (Bituminous) Products
ASTM D3143/D3143M-13 Standard Test Method for Flash Point of Cutback Asphalt with Tag Open-Cup Apparatus
ASTM D1296-23 Standard Test Method for Odor of Volatile Solvents and Diluents
ASTM D5969-08 Standard Test Method for Corrosion-Preventive Properties of Lubricating Greases in Presence of Dilute Synthetic Sea Water Environments
ASTM D1296-01(2007) Standard Test Method for Odor of Volatile Solvents and Diluents
ASTM D1296-01 Standard Test Method for Odor of Volatile Solvents and Diluents
ASTM D5969-11(2016) Standard Test Method for Corrosion-Preventive Properties of Lubricating Greases in Presence of Dilute Synthetic Sea Water Environments
ASTM D3525-93(1997) Standard Test Method for Gasoline Diluent in Used Gasoline Engine Oils by Gas Chromatography
ASTM D5969-11e1 Standard Test Method for Corrosion-Preventive Properties of Lubricating Greases in Presence of Dilute Synthetic Sea Water Environments
ASTM D5969-11 Standard Test Method for Corrosion-Preventive Properties of Lubricating Greases in Presence of Dilute Synthetic Sea Water Environments
ASTM D5969-02 Standard Test Method for Corrosion-Preventive Properties of Lubricating Greases in Presence of Dilute Synthetic Sea Water Environments
ASTM D5969-05 Standard Test Method for Corrosion-Preventive Properties of Lubricating Greases in Presence of Dilute Synthetic Sea Water Environments
ASTM D5969-05e2 Standard Test Method for Corrosion-Preventive Properties of Lubricating Greases in Presence of Dilute Synthetic Sea Water Environments
ASTM D5969-05e1 Standard Test Method for Corrosion-Preventive Properties of Lubricating Greases in Presence of Dilute Synthetic Sea Water Environments
ASTM D5969-96 Standard Test Method for Corrosion-Preventive Properties of Lubricating Greases in Presence of Dilute Synthetic Sea Water Environments
ASTM D2026-97(2004) Standard Specification for Cutback Asphalt (Slow-Curing Type)
ASTM D2027-97(2004) Standard Specification for Cutback Asphalt (Medium-Curing Type)
ASTM D2026-97 Standard Specification for Cutback Asphalt (Slow-Curing Type)
ASTM D1243-15 Standard Test Method for Dilute Solution Viscosity of Vinyl Chloride Polymers
ASTM D1243-14 Standard Test Method for Dilute Solution Viscosity of Vinyl Chloride Polymers
ASTM D2027-97 Standard Specification for Cutback Asphalt (Medium-Curing Type)
ASTM D3143/D3143M-19 Standard Test Method for Flash Point of Cutback Asphalt with Tag Open-Cup Apparatus

GM North America

GM 9985231-1973 Copper Brazing Paste, Water Thinning
GM 9984422-1990 Thinner - Mistcoat, for Waterborne Enamel
GM 9985784-2014 Lubricant, Rubber (Nonwater Dilutable) (Issue 2)
GM 9985784-1993 Lubricant, Rubber (Nonwater Dilutable)

SAE - SAE International

SAE AMS3430B-1990 Brazing Filler Metal@ Paste@ Copper Water Thinning
SAE AMS3430-1958 PASTE@ COPPER BRAZING Water Thinning
SAE AMS3430A-1983 BRAZING FILLER METAL@ PASTE@ COPPER Water Thinning
SAE AMS3170G-2008 Thinner@ Alcohol-Ester

United States Navy

NAVY AN4077 REV 1-1944 FITTING - OIL DILUTION SYSTEM TWIN RESTRICTED TUBE
NAVY AN4077 REV 1 NOTICE 1-1960 FITTING - OIL DILUTION SYSTEM TWIN RESTRICTED TUBE
NAVY TT-T-2935-2000 THINNER, PURGING
NAVY TT-T-2935 VALID NOTICE 1-2005 THINNER, PURGING

Society of Automotive Engineers (SAE)

SAE AMS3430E-2014 Brazing Filler Metal, Paste, Copper, Water Thinning
SAE AMS3430D-2008 Brazing Filler Metal, Paste, Copper Water Thinning
SAE AMS3430C-2006 Brazing Filler Metal, Paste, Copper Water Thinning
SAE AMS3430C-2001 Brazing Filler Metal, Paste, Copper Water Thinning
SAE AMS3430B-1994 BRAZING FILLER METAL, PASTE, COPPER Water Thinning
SAE AMS3170F-2005 THINNER Alcohol-Ester
SAE AMS3170E-1995 THINNER Alcohol-Ester
SAE AMS3170D-1978 THINNER Alcohol-Ester
SAE AMS3170B-1953 THINNER Alcohol - Ester
SAE AMS3170C-1968 THINNER Alcohol - Ester
SAE AMS3170A-1952 THINNER Alcohol - Ester
SAE AMS3170-1948 THINNER Alcohol - Ester
SAE AMS3180-1940 TOLUENE THINNER Commercial
SAE AMS3180B-1952 TOLUENE THINNER Commercial
SAE AMS3180A-1947 TOLUENE THINNER Commercial
SAE AMS3170F-1996 Thinner Alcohol-Ester
SAE AMS3180C-1963 TOLUENE THINNER Commercial

The American Road & Transportation Builders Association

AASHTO M 82-2017 Standard Specification for Cutback Asphalt (Medium-Curing Type)
AASHTO M 81-92(R2017) Standard Specification for Cutback Asphalt (Rapid-Curing Type)
AASHTO M 82-1975 Standard Specification for Cutback Asphalt (Medium-Curing Type)
AASHTO M 81-1992 Standard Specification for Cutback Asphalt (Rapid-Curing Type)
AASHTO T 78-2015 Standard Method of Test for Distillation of Cutback Asphalt Products
AASHTO T 78-2014 Standard Method of Test for Distillation of Cutback Asphalt Products
AASHTO T 78-2015(R2019) Standard Method of Test for Distillation of Cutback Asphalt Products
AASHTO T 78-2010 Standard Method of Test for Distillation of Cutback Asphaltic (Bituminous) Products

SCC

AASHTO M 82-1975(2012) Standard Specification for Cutback Asphalt (Medium-Curing Type)
AASHTO M 82-2017(2021) Standard Specification for Cutback Asphalt (Medium-Curing Type)
AENOR UNE 48085:1985 Water in solvents and diluents.
BS 5082:1974 Specification for water-thinned priming paints for wood
AASHTO M 81-1992(2021) Standard Specification for Cutback Asphalt (Rapid-Curing Type)
AASHTO T 78-2015(2019) Standard Method of Test for Distillation of Cutback Asphalt Products
AASHTO T 78-2022 Standard Method of Test for Distillation of Cutback Asphalt Products
AS 2157:1978 Cutback bitumen
AS 2157:1980 Cutback bitumen
CAN/CGSB 1.124-1999 Diluant pour revetements aux resines vinyliques
MIL MIL-W-71125-1992 WOOD PRESERVATIVES: WATERBORNE OR WATER REDUCIBLE (S/S BY A-A-59276)
CAN/CGSB-1.4-2000 Petroleum Spirits Thinner
CAN/CGSB-37.16-M89-1989 Filled, Cutback Asphalt for Dampproofing and Waterproofing
CAN/CGSB-1.110-M91-1991 General Purpose Thinner For Lacquers
NS-EN 15626:2009 Bitumen and bituminous binders — Determination of adhesivity of cut-back and fluxed bituminous binders by water immersion test — Aggregate method
CAN/CGSB-1.70-1999 High-Solvency Thinner
HOLDEN HN 1057-2001 Kaylo Thinner No. 300
NS-EN 15626:2016 Bitumen and bituminous binders — Determination of adhesivity of cut-back and fluxed bituminous binders by water immersion test — Aggregate method
AENOR UNE 48162:1962 THINNERS FOR SYNTHETIC ENAMELS
CAN/CGSB-1.4-1992 Thinner, mineral spirits
CAN/CGSB-1.70-M91-1991 Thinner with high solvent power
DANSK DS/EN 15626:2016 Bitumen and bituminous binders – Determination of adhesivity of cut-back and fluxed bituminous binders by water immersion test – Aggregate method
CAN/CGSB-16.1-M89-1989 Cutback bitumen for roads
HOLDEN HN 1573-2001 Diluent for Anti-Friction Coating
AENOR UNE-EN 15626:2016 Bitumen and bituminous binders - Determination of adhesion of cut-back and fluxed bituminous binders by water immersion test - Aggregate method
UNE-EN 15626:2009 Bitumen and bituminous binders - Determination of adhesivity of cut-back and fluxed bituminous binders by water immersion test - Aggregate method
CAN/CGSB-1.197-1992 Thinner for Epoxy Coatings
CAN/CGSB 1.4-2000 Diluant, essence minerale

TR-TSE

TS 122-1978 STANDARD METHOD OF DISTILLATION TEST FOR CUT-BACK ASPHALTIC PRODUCTS

AASHTO - American Association of State Highway and Transportation Officials

M 82-1975 Standard Specification for Cutback Asphalt (Medium-Curing Type)
M82-1975 Standard Specification for Cut-Back Asphalt (Medium-Curing Type)
M 81-1992 Standard Specification for Cut-Back Asphalt (Rapid-Curing Type)
T 78-2014 Standard Method of Test for Distillation of Cutback Asphalt Products
M81-1992 Standard Specification for Cut-Back Asphalt (Rapid-Curing Type) (Twentieth Edition)
T 78-2010 Standard Method of Test for Distillation of Cutback Asphaltic (Bituminous) Products
T 78-2005 Standard Method of Test for Distillation of Cutback Asphaltic (Bituminous) Products

AENOR

UNE 48085:1985 WATER IN SOLVENTS AND THINNERS
UNE 7149:1959 MODIFIED MIXIBILITY TEST OF WATER CUTBACKS.
UNE 7148:1959 MIXIBILITY TEST OF WATER AND COAGULATION CUTBACKS.

ES-AENOR

UNE 48-085-1985 Water in solvents and diluents

GM Europe

GME L 000 0435-2003 Water Thinned Fuel Tank Paint (English/German)
GME L 000 0239-2013 Thinner A-I for clear coat (English/German)
GME B 040 0394-2011 Cleaning thinner for spray booths
GME L 000 0545-2004 Varnish Thinner A-II

AIA/NAS - Aerospace Industries Association of America Inc.

NAS1616-1981 Topcoat@ Water Reducible (Rev 1)
NAS1617-1981 Coating: High Temperature Resistant@ Water Reducible (Rev 1)

U.S. Military Regulations and Norms

ARMY MIL-P-53030 A-1992 PRIMER COATING, EPOXY, WATER REDUCIBLE, LEAD AND CHROMATE FREE
ARMY MIL-P-53030 A (2)-1992 PRIMER COATING, EPOXY, WATER REDUCIBLE, LEAD AND CHROMATE FREE

HU-MSZT

MSZ 7480-1961 Thinner
MSZ 09 80 015-1972 paint thinner
MSZ 8576-1959 fat thinner
MSZ 3268-1965 diluted bitumen
MSZ 1584/4-1981 dilute melting agent

TH-TISI

TIS 865-2001 Cut.back asphalt
TIS 1318-2009 Retarded thinner
TIS 496-2010 Lacquer thinner
TIS 496-1983(en) LACQUER THINNER
TIS 2489.1-2010 Standard test method for thinner.part 1: sayboltcolor
TIS 520-2010 Nitrocellulose lacquer thinner

CZ-CSN

CSN 67 3150 Cast.03-1975 Dilulion ability
CSN 67 5839-1980 Thinner S 6900 for p^ints
CSN 67 5811-1980 Thiímer H 6000 for paints
CSN 67 5832-1980 Thinner S 6017 for paints
CSN 67 5825-1980 Thinner S 6006 for paints
CSN 65 7205-1977 Cut - back aaphalts for roads
CSN 67 5814-1980 Thinner C 6002 for palnts
CSN 67 5820-1980 Thinner S 6001 for paints
CSN 67 5834-1980 Thinner S 6023 for paints
CSN 67 5824-1980 Thinner S 6005 for paints
CSN 67 5823-1980 Thinner S 6004 for pnints
CSN 67 5821-1980 Thinner S 6002 for pnints
CSN 67 5829-1980 Thinner S 6010 for paints
CSN 67 5822-1980 Thinner S 6003 for paints
CSN 65 1171-1986 Diluted phosphoric acid for industrial use
CSN 67 5833-1980 Thinner S 6019 for paints

PL-PKN

PN BN 6110-14-1965 Paint thinner. Ingredients and labeling
PN BN 6016-11-1966 Thinner. Ammonium sulfate
PN BN 6118-13-1964 Aurit paint thinner
PN BN 6118-20-1966 reactive pigment diluent

Aerospace Industries Association

AIA NAS 1616-1981 (Inactive)Topcoat, Water Reducible (Rev. 1)
AIA NAS 1617-1981 (Inactive)Coating: High Temperature Resistant, Water Reducible (Rev. 1)

VE-FONDONORMA

COVENIN 676-1974 Measurement of pH value in the Venezuelan standard for diluted pigments
COVENIN 679-1974 Measurement of pH value in the Venezuelan standard for diluted pigments
COVENIN 690-1974 Measurement of drying time in the Venezuelan standard for diluted pigments

FI-SFS

SFS 3019-1979 Determine the biochemical oxygen demand in water. dilution method

Japanese Industrial Standards Committee (JISC)

JIS K 5538:2002 Lacquer thinner
JIS K 5538:1995 Lacquer thinner

Standard Association of Australia （SAA）

AS 4276.2:1995(R2013) Water microbiology media, diluents and reagents
AS 4276.2:1995 Water microbiology - Culture media, diluents and reagents

CH-SNV

SEV 3064-1965 dilution. quality regulations
SN 210 902/1-1984 Aluminium and aluminium alloys, wrought productsBarsTechnical conditions for delivery

IN-BIS

IS 217-1961 Specification for diluted bitumen

IL-SII

S.I.T.D.663-1967 DILUTED DTES FOR FOODSTUFFS

Association Francaise de Normalisation

NF T60-195:1993 Fluides d'usinage aqueux - Opacité à l'état dilué

SE-SIS

SIS SS 02 81 43-1990 Determination of biochemicaloxygen demand, BODi of waste water — Dilution method

BR-ABNT

ABNT NBR 5765-2012 Diluted asphalt — Determinations of flashpoint — Tag open cup
ABNT EB-96R-1956 alkyd enamel thinner

Military Standards (MIL-STD)

DOD A-A-50812 A-1989 PIPET, BLOOD DILUTING

Canadian General Standards Board （CGSB)

CGSB 1.110-M91-CAN/CGSB CORR 1-1991 General Purpose Thinner for Lacquers
CGSB 1.70-99-CAN/CGSB-1999 Diluant A Pouvoir Solvant Eleve

ES-UNE

UNE-EN 15626:2016 Bitumen and bituminous binders - Determination of adhesivity of cut-back and fluxed bituminous binders by water immersion test - Aggregate method