Dissolution profile method development
Dissolution profile method development, Total:46 items.
The international standard classification for "Dissolution profile method development" includes: Surface treatment and coating , Waxes, bituminous materials and other petroleum products , Cement. Gypsum. Lime. Mortar , Solid wastes .
The Chinese standard classification for "Dissolution profile method development" includes: Material Protection , Petroleum wax , Cement , Hygiene, safety and labor protection , Beverages in general , Analysis methods for industrial residue pollutants .
Professional Standard - Electron
- SJ/Z 1171-1977 Methods for determination of polarization curve of electroplating solution
Professional Standard - Machinery
- JB/T 7704.6-1995 Test Method for Electroplating Solution - Determination of Polarization Curve
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China
- GB/T 4909.5-1985 Test methods for bare wires--Bend test--Reverse bend test
- GB/T 3789.19-1991 Measurements of the electrical properties of transmitting tubes-Measuring methods of frequency characteristic curve
- GB/T 3789.13-1991 Measurements of the electrical properties of transmitting tubes-Measuring methods of static characteristic curve for common grid circuit
- GB/T 4909.6-1985 Test methods for bare wires--Bend test--Single bend test
- GB/T 3789.14-1991 Measurements of the electrical properties of transmitting tubes-Measuring methods of static characteristic curve for common cathode circuit
- GB/T 2539-1981 Paraffins;Determination of melting point(cooling curve)
国家市场监督管理总局、中国国家标准化管理委员会
- GB/T 39706-2020 Test method for dissolution rate and quantity of SO42- released from gypsum
Professional Standard - Agriculture
- SN/T 5513-2023 Enumeration of Campylobacter spp. in poultry for export
Group Standards of the People's Republic of China
- T/CMA YX129-2024 Calibration Method for Dissolution Testers
Professional Standard - Commodity Inspection
- SN 0589-1996 Method for the determination of patulin in beverage for export
- SN/T 0175-2010 Detection of Campylobacter spp.in food for import and export
- SN 0175-1992 Method for detection of campylobacterspecies in food for export
- SN/T 2510-2010 Test method of lead and cadmium extracted from export and import domestic ceramicware
Professional Standard - Environmental Protection
- HJ/T 300-2007 Solid waste-Extraction procedure for leaching toxicity-Acetic acid buffer solution method
Professional Standard - Automobile
- QC/T 637-2000 Test method for endurance bending strength of automotive engines crank shaft
Professional Standard - Non-ferrous Metal
- YS/T 1642-2023 Evaluation methodology for bayer process digestion of bauxite
American Welding Society (AWS)
- WRC 458:2001 Fracture Toughness Master Curve Development: Application Of Master Curve Fracture Toughness Methodology For Ferritic Steels
- WRC 459:2001 Fracture Toughness Master Curve Development: Strategies For RPV Assessment
Association Francaise de Normalisation
- NF T30-302:1969 Paints. Determination of the evaporation curve of a solvent.
The American Road & Transportation Builders Association
- AASHTO R 75-2016(R2020) Standard Practice for Developing a Family of Curves
- AASHTO PP 96-2018(R2020) Proposed Standard Practice for Developing Dynamic Modulus Master Curves for Asphalt Mixtures Using the Indirect Tension Testing Method
- AASHTO R 62-2013(R2017) Standard Practice for Developing Dynamic Modulus Master Curves for Asphalt Mixtures
WRC - Welding Research Council
- BULLETIN 459-2001 FRACTURE TOUGHNESS MASTER CURVE DEVELOPMENT: MASTER CURVE STRATEGIES FOR RPV ASSESSMENT
- BULLETIN 458-2001 FRACTURE TOUGHNESS MASTER CURVE DEVELOPMENT: APPLICATION OF MASTERCURVE FRACTURE TOUGHNESS METHODOLOGY FOR FERRITIC STEELS
SCC
- AASHTO R 75-2016(2020) Standard Practice for Developing a Family of Curves
- AWWA JAW26121 Journal AWWA — Developing System Head Curves for Water Distribution Pumping
- AWWA JAW72575 Journal AWWA — Developing System Head Curves for Closed Systems
- AWWA SYM53642 Low Impact Development and Redevelopment Approaches
- IEEE C57.107-2024 IEEE Recommended Practice for Developing Short-Term Overexcitation V/Hz Curves for Transformers Directly Connected to Generators
- AASHTO R 62-2013(2021) Standard Practice for Developing Dynamic Modulus Master Curves for Asphalt Mixtures
- AWWA WQTC58801 Development of Alternate Means for Validation of UV Reactors
- AASHTO PP 62-2009 Standard Practice for Developing Dynamic Modulus Master Curves for Hot Mix Asphalt (HMA)
ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc.
- ASHRAE AN-04-3-1-2004 Development and Testing of the Characteristic Curve Fan Model
AASHTO - American Association of State Highway and Transportation Officials
- PP 62-2009 Standard Practice for Developing Dynamic Modulus Master Curves for Hot Mix Asphalt (HMA)
- PP 96-2018 Proposed Standard Practice for Developing Dynamic Modulus Master Curves for Asphalt Mixtures Using the Indirect Tension Testing Method
- T 272-2010 Standard Method of Test for Family of Curves—One Point Method
RU-GOST R
- GOST 15634.3-1970 Magnet wire. Method of the bending test
YU-JUS
- JUS N.N6.322-1978 Radiocommunications. Transmitters. Methods of measurements. Output power
IN-BIS
- IS 11189-1985 Tube Well Development Methods
American Society for Testing and Materials (ASTM)
- ASTM F1832-07(2011) Standard Test Method for Determining the Force-Draw and Let-Down Curves for Archery Bows
Japanese Industrial Standards Committee (JISC)
- JIS P 8004:1976 Testing method for cold-water solubility of pulpwood
- JIS P 8005:1976 Testing method for hot-water solubility of pulpwood
ESDU - Engineering Sciences Data Unit
- ESDU 80035-1980 Buckling of outstanding flanges. Direct stresses varying linearly or parabolically.
SAE - SAE International
- SAE AIR5797A-2018 Aircraft Tire Wear Profile Development and Execution for Laboratory Testing
