Motorcycle tires related

Motorcycle tires related, Total:143 items.

The international standard classification for "Motorcycle tires related" includes: Road vehicle tyres , Road vehicles in general , Tyres for agricultural machinery , Motorcycles and mopeds .

The Chinese standard classification for "Motorcycle tires related" includes: Tyre , Motorcycles in general , Bearing system , Transmission and braking system .

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 13203-2021 Methods for verifying capabilities of motorcycle tyres
GB 518-2020 Motorcycle tyres

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 15028.2-1994 Teminology for motorcycles.Controllability and stability.Wheels and tyres
GB/T 13203-2007 Test methods for verifying capabilities of motorcycle tyres
GB/T 18861-2012 Test methods of rolling resistance for motor vehicle tyres and motorcycle tyres—Multi-point test
GB 7036.2-2007 Inner tube of pneumatic tyres—Part 2:Inner tube of motorcycle tyres
GB/T 518-1997 motorcycle tire
GB/T 2983-2008 Series of motorcycle tyres
GB 518-1997 Motorcycle tyres
GB/T 2983-1997 Series of motorcycle tyres
GB/T 22628-2008 Test method of measuring rolling circumference for motorcycle tyres
GB/T 2983-2015 Series of motorcycle tyres
GB 518-2007 Motorcycle tyres
GB 7036.2-1997 Inner tube of pneumatic tyres-Part 2: Inner tube of motorcycle tyres
GB/T 13203-2014 Test methods for verifying capabilities of motorcycle tyres
GB/T 7036.2-2017 Inner tube of pneumatic tyres―Part 2:Inner tube of motorcycle tyres
GB/T 13203-1991 Strength test for motorcycle tyres

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 7036.2-2007 Inner tube of pneumatic tyres - Part 2: Inner tube of motorcycle tyres
GB/T 34378-2017 Dynamic balance test method for motorcycle tyres

Professional Standard - Chemical Industry

HG/T 4402-2012 Motorcycle Tire Builder with Turning-up Bladder
HG/T 4962-2016 Test method of water pressure for motorcycle tyres

Group Standards of the People's Republic of China

T/CRIA 12001-2020 Evaluation specification for super grade products of bicycle tire,electric bicycle tire and motorcycle tire

Professional Standard - Commodity Inspection

SN/T 1636.6-2005 Rules for the inspection of tyres for import and export - Part 6: Motorcycle tyres

Professional Standard - Automobile

QC/T 71-2009 Rims of motorcycles and mopeds
QC/T 904-2013 Wheels hub of motorcycles and mopeds
QC/T 819-2009 Frame of two-wheel motorcycle and two-wheel moped

AT-ON

ONORM V 5033 Teil.4-1989 Tyres for motor-cycles; tyres, rims and valves for motor-cycles
ONORM V 5033 Teil.2-1989 Tyres for motor-cycles; tyres, rims and valves for mopeds and small cubic capacity motorcycles
ONORM V 5033 Teil.3-1989 Tyres for motor-cycles; tyres, rims and valves for scooters
ONORM V 5033 Teil.1-1989 Tyres for motor-cycles; general, marking of conjormity

Association Francaise de Normalisation

NF R22-734:1990 MOTORCYCLES TYRES. INSTRUCTIONS FOR USE OF TYRES FOR MOTORCYCLES.
NF R22-731-1*NF ISO 4249-1:1987 Motorcycle tyres and rims (Code designated series) - Part 1 : tyres
NF R99-034:1974 VALVES FOR INNER TUBES FOR MOTORCYCLES,SMALL CAPACITY MOTORCYCLES,MOPEDS AND CYCLES.

Japanese Industrial Standards Committee (JISC)

JIS K 6366:1998 Motorcycle tyres
JIS D 4203:1991 Motorcycles tyers -- Dimensions
JIS B 8912:1960 Rubber tubes for motorcycle tires
JIS D 4203:1998 Motorcycle tyres -- Designation and dimensions

Korean Agency for Technology and Standards (KATS)

KS M 6753-2009 Pneumatic tyre for motorcycles and scooters
KS M 6753-1982 Pneumatic tyre for motorcycles and scooters
KS R 0059-2003 DIMENSIONS OF TIRES FOR MOTORCYCLES AND SCOOTERS
KS M ISO 5995-2015 Moped tyres and rims
KS M 6753-2014(2020) Pneumatic tyre for motorcycles and scooters
KS M ISO 5995-2007(2015) Moped tyres and rims
KS M 6753-2020 Pneumatic tyre for motorcycles and scooters
KS M ISO 13328-2010(2021) Motorcycle tyres－Measurement of tyre rolling circumference－Loaded new tyres
KS M ISO 13328-2021 Motorcycle tyres－Measurement of tyre rolling circumference－Loaded new tyres
KS M ISO 10231:2010 Motorcycle tyres－Test methods for verifying tyre capabilities
KS M 6753-2014 Pneumatic tyre for motorcycles and scooters
KS M ISO 10231:2021 Motorcycle tyres — Test methods for verifying tyre capabilties
KS M ISO 4249-1-2010(2021) Motorcycle tyres and rims(Code designated series)－Part 1：Tyres
KS R 0132-2022 Road vehicles－Glossary of terms relation to electric two-wheeled motorcycles
KS M ISO 4249-1:2010 Motorcycle tyres and rims(Code designated series)－Part 1：Tyres
KS M ISO 4249-1-2021 Motorcycle tyres and rims(Code designated series)－Part 1：Tyres
KS M ISO 5751-3:2021 Motorcycle tyres and rims(metric series)—Part 3: Range of approved rim contours
KS M ISO 13327-2005(2015) Motorcycle tyres－Method of measuring rolling resistance
KS M ISO 13327-2015 Motorcycle tyres－Method of measuring rolling resistance
KS M ISO 13328:2010 Motorcycle tyres－Measurement of tyre rolling circumference－Loaded new tyres
KS M ISO 4249-2-2021 Motorcycle tyres and rims(Code-designated series)－Part 2：Tyre load ratings
KS M ISO 4249-2-2005(2021) Motorcycle tyres and rims(Code-designated series)－Part 2：Tyre load ratings
KS M ISO 4249-3-2015(2021) Motorcycle tyres and rims(Code-designated series)－Part 3：Rims
KS M ISO 6054-1-2010(2021) Motorcycle tyres and rims(code-designated series)－Diameter codes 4 to 12－Part 1：Tyres

TH-TISI

TIS 682-1997 Motorcycle tyres

HU-MSZT

MSZ 11058-1970 Tire moped, motorcycle and a motorcycle
MNOSZ 1346-1953 car motorcycle tires
MSZ 11059-1966 Tire tube moped small engine and a motorcycle
MSZ 13564/2-1979 Bias tires. Motorcycle tire industry requirements and quality classification

RO-ASRO

STAS 627/2-1971 INNER TUPES FOR MOTORBICYCLES, SCOOTERS AND MOTORCYCLES TYRES Sizcs
STAS 627/2-1989 INNER TUBES FOR MOTOR BIKE, SCOOTER A.ND MOTORCYCLE- TYRES Sizes and marking
STAS 6386/2-1986 Rubber tyres TURES FOR MOTORCYCLES, MOTOR-BIKES AND SCOOTERS General technical requirements for quality
STAS 6386-2/A1-1998 Rubber tyres - Tyres for motorcycles, motor-bikes and scooters - General technical requirements for quality

German Institute for Standardization

DIN 7810:1984 Scooter tyres
DIN 7801:1984 Tyres for small cubic capacity motorcycles
DIN 7801:1984-07 Tyres for small cubic capacity motorcycles

AENOR

UNE 69021:1992 TYRES, RIMS AND VALVES. TYRES FOR CYCLES, MOPEDS AND MOTORCYCLES. GENERALITIES.
UNE 69008:2003 Tyres, rims and valves. Tyres for motorcycles. Safety recommendations.
UNE 69030:1996 TYRES, RIMS AND VALVES. TYRES FOR MOTORCYCLES. DIMENSIONAL CHARACTERISTICS AND PERMISSIBLE RIM.

YU-JUS

JUS G.E3.301-1982 Motocycle tyres and motocycles trailers tyres for speeds to 150 km/h
JUS G.E3.301/1-1989 Motocycle tyres and motocycles trailers tyres for speeds to 150 km/h. Amendments
JUS M.N1.055-1982 Rims for moped tyres, motocycle tyresandmotocycles trailers tyres
JUS G.E3.401-1982 Scooters tyres and cars light trailer tyres. Diagonal design
JUS G.E3.401/1-1989 Scooters tyres and cars light trailer tyres. Diagonal design. Amendments
JUS G.E3.451-1982 Moped tyres and motocycles tyres and its trailers tyres for speeds 50 and 100 km/h

RU-GOST R

GOST 5652-1989 Pneumatic tyres for motor-cycles, cycle-cars, motor-scooters and motor-bicycles. Specifications
GOST ED1 5652-1989 Pneumatic tyres for motor-cycles, cycle-cars, motor-scooters and motor-bicycles. Specifications
GOST 28727-1990 Motorcycle tyres and rims (code-designated series). Part 1. Tyres

CZ-CSN

CSN 63 1000 Cast.3-1987 Marking oí motor-cycle tyres
CSN 63 1013-1978 Motor-cycle and scooter tyres. Technlcal requirements
CSN 63 1126-1972 Tyrcs for mopcds and motercycles nf smnll circumference, up to 50 km/h. Sizcs
CSN 63 1132-1965 Tires of 16*, 18* and 19* for motor-cycle drop center rims

GSO

GSO ISO 13328:2013 Motorcycle tyres -- Measurement of tyre rolling circumference -- Loaded new tyres
OS GSO ECE 75:2010 Uniform Provisions Concerning The Approval of Pneumatic tyres for motor cycles and mopeds
BH GSO ISO 13328:2016 Motorcycle tyres -- Measurement of tyre rolling circumference -- Loaded new tyres
GSO ISO 10231:2024 Motorcycle tyres — Test methods for verifying tyre capabilities
OS GSO ISO 4249-1:2013 Motorcycle tyres and rims (Code-designated series) -- Part 1: Tyres
GSO ISO 4249-1:2013 Motorcycle tyres and rims (Code-designated series) -- Part 1: Tyres
OS GSO ECE 75-2:2007 Motor Cycles Tyres- Part 2: Methods of Testing
GSO ECE 75-2:2007 Motor Cycles Tyres- Part 2: Methods of Testing
GSO ISO 6054-2:2013 -Motorcycle tyres and rims (code-designated series) Diameter codes 4 to 12-- Part 2: Rims
BH GSO ISO 4249-2:2016 Motorcycle tyres and rims (Code-designated series) -- Part 2: Tyre load ratings
OS GSO ISO 4249-2:2013 Motorcycle tyres and rims (Code-designated series) -- Part 2: Tyre load ratings

PL-PKN

PN C94300-074-1987 Tires and tubes Tubes for mopeds
PN C94300 ArkusZ089-1971 Tires and tubes. Sizes and technical characteristic of rubber flaps for motorcycles and scooters tubes
PN C94300-044-1987 Tires and tubes Sizes and technical charakteristics of mopeds tires
PN C94300 ArkusZ046-1973 Tires and tubes Sizes and technical cnaracteristics of scooter tires
PN C94300 ArkusZ005-1974 Tires and tubes Classification, designation and instruction for marking of bicycles and mopeds tires

IN-BIS

IS 12151-1987 Specification for motorcycle tires bias ply

British Standards Institution (BSI)

BS AU 50-1.6.6a:1998 Tyres and wheels. Tyres. Motorcycle tyres. Method of test for verifying tyre capabilities
BS ISO 10231:2003 Motorcycle tyres - Test methods for verifying tyre capabilities
BS AU 50-1.6.7:1998 Tyres and wheels. Tyres. Motorcycle tyres. Method of test for measuring rolling resistance
BS AU 50-1.6.8:2000 Tyres and wheels. Tyres. Motorcycle tyres. Method of measuring tyre rolling circumference for new tyres under loaded conditions. Section 6: Motorcycle tyres Subsection 6.8: Method for measuring tyre rolling circumference for new tyres under loaded cond...
BS ISO 4249-3:2010 Motorcycle tyres and rims (code-designated series). Rims
21/30430279 DC BS ISO 10231. Motorcycle tyres. Test methods for verifying tyre capabilities
BS ISO 5751-1:2010 Motorcycle tyres and rims (metric series). Design guides
BS ISO 5751-2:2010 Motorcycle tyres and rims (metric series). Tyre dimensions and load-carrying capacities
BS ISO 5751-3:2010 Motorcycle tyres and rims (metric series). Range of approved rim contours

International Organization for Standardization (ISO)

ISO 10231:1997 Motorcycle tyres - Test methods for verifying tyre capabilities
ISO 10231:2022 Motorcycle tyres — Test methods for verifying tyre capabilities
ISO 10231:2003 Motorcycle tyres - Test methods for verifying tyre capabilities
ISO 4249-1:1978 Motorcycle tyres and rims (Existing series) — Part 1: Tyres
ISO 5995-2:1984 Moped tyres and rims — Part 2: Rims
ISO 4249-1:1985 Motorcycle tyres and rims (Code designated series); Part 1 : Tyres
ISO 10231:1997/Amd 1:1999 Motorcycle tyres - Test methods for verifying tyre capabilities; Amendment 1
ISO 13328:2000 Motorcycle tyres - Measurement of tyre rolling circumference - Loaded new tyres
ISO 5995-2:1988 Moped tyres and rims; part 2: rims
ISO 10231:2003/Amd 1:2015 Motorcycle tyres - Test methods for verifying tyre capabilities; Amendment 1
ISO 5751-1:1988 Motorcycle tyres and rims (metric series); part 1: types, all series
ISO 5751-1:1983 Motorcycle tyres and rims (metric series) — Part 1: Tyres — All series
ISO 5751-2:1988 Motorcycle tyres and rims (metric series); part 2: tyre series 100, 90, 80, 70 and 60
ISO 6054-1:1981 Motorcycle tyres and rims (diameter codes 4 to 12) — Scooter type — Part 1: Tyres
ISO 4249-2:1983 Motorcycles tyres and rims (code designated series) — Part 2: Tyre load ratings

KR-KS

KS M ISO 10231-2021 Motorcycle tyres — Test methods for verifying tyre capabilties
KS M ISO 5751-3-2021 Motorcycle tyres and rims(metric series)—Part 3: Range of approved rim contours

SCC

BS ISO 10231:2003+A1:2015 Motorcycles tyres. Test methods for verifying tyre capabilities
BS ISO 4249-3:2004 Motorcycle tyres and rims (code-designated series)-Rims
ISO 10231:1992 Motorcycle tires — Test methods for verifying the suitability of tires
BS ISO 5751-2:2004 Motorcycle tyres and rims (metric series)-Tyre dimensions and load-carrying capacities
BS ISO 5751-1:2004 Motorcycle tyres and rims (metric series)-Design guides

ZA-SANS

SANS 20075:2004 Uniform provisions concerning the approval of pneumatic tyres for motor cycles and mopeds
SANS 1550-4:2005 Motor vehicle tyres and rims - Dimensions and loads Part 4: Motorcycle and scooter tyres

SE-SIS

SIS SS-ISO 8644:1989 Motorcycles — Light alloy wheels — Test method

VN-TCVN

TCVN 7057-1-2002 Road vehicles.Motorcycle tyres and rims (code designated series).Part 1: Tyres

ES-AENOR

UNE 69-008-1989 Recommendations for maintenance and safe use of motorcycle tires
UNE 69-009-1989 Replacement and safe use suggestions for motorcycle tires