Use of square resistance tester

Use of square resistance tester, Total:292 items.

The international standard classification for "Use of square resistance tester" includes: Electricity. Magnetism. Electrical and magnetic measurements , Other textile machinery , Measurement of electrical and magnetic quantities , Power stations in general , Metrology and measurement in general , Non-destructive testing , Vibrations, shock and vibration measurements , Testing of metals in general , Clothes , Other equipment for petroleum and natural gas industries , Exploratory and extraction equipment .

The Chinese standard classification for "Use of square resistance tester" includes: Electromagnetic Measurement , Radio Measurement , Textile testing instrument , Other electronic instrument and equipment , Technical management , AC/DC electrical instrument recording instrument , Electric power testing technique , Electrical instrument and meter in general , Industrial automation and control device in general , Ultrasonic wave and sound radiation defectoscope , Basic standards and general methods , Metal physical property test method , Clothing, footgear and headwear in general , Petroleum exploration, development, gathering and transportation engineering in general .

National Metrological Verification Regulations of the People's Republic of China

JJG(烟草)02-2014 Verification Regulation of the Cigarettes Draw Resistance and Filter Rods Pressure Drop Instrument
JJG(烟草) 02-2014 Calibration rules for cigarette draw resistance and filter rod pressure drop tester
JJG 508-2004 Verification Regulation of Resistivity Measuring Instruments with Four-Probe Array Method
JJG 1052-2009 Verification Regulation of Loop Resistance Tester and DC Resistance Meters
JJG(电子) 05001-1987 RCJ-3 Insulation Resistance Tester Trial Verification Regulations
JJG 508-1987 Resistivity Measuring Instruments with Four -Probe Array Method
JJG(电子) 05018-1988 Trial Verification Regulations for HM2672 Insulation Resistance Measuring Instrument
JJG 1180-2021 Power Frequency GroundImpedance Testers for Large Grounding Grid
JJG(民航) 0089-2006 Verification Regulation of 906-10247-2 Loop Resistance Tester
JJG 984-2004 Verification Regulation of Earth-Continuity Testers

Group Standards of the People's Republic of China

T/SDZDH 002-2020 Mask ventilation resistance and pressure difference detector Calibration method
T/CEC 354-2020 General technical requirements for transformer low-voltage short-circuit impedance tester
T/GZJL 1-2023 Calibration method for environmental corrosion monitoring instrument using resistance method
T/GDCKCJH 047-2021 Performance requirements and test method for mask flame retardant tester
T/ZZB 0369-2018 Textiles thermal and water-vapour resistance apparatuses
T/CSMT YB001-2022 Micro-vibration test specification for precision instrument use environment

未注明发布机构

ASTM RR-F08-1015 2018 F3340-Standard Test Method for Measuring Thermal Resistance of Camping Mattresses Using Guarded Hotplate Apparatus
ASTM RR-D13-1130 2011 D1518-Test Method for Thermal Resistance of Batting Systems Using a Hot Plate
DIN EN 1267:1999 Valves – Test of flow resistance using water as test fluid
ASTM F1677-05 Standard Test Method for Using a Portable Inclineable Articulated Strut Slip Tester (PIAST)
ASTM RR-D18-2002 2022 D6128-Test Method for Shear Testing of Bulk Solids Using the Jenike Shear Tester
ASTM RR-F08-2001 2022 F3340-Test Method for Thermal Resistance of Camping Mattresses Using a Guarded Hot Plate Apparatus
ASTM RR-D01-1157 2011 D7681-Test Method for Measuring Gradation of Glass Spheres Using a Flowing Stream Digital Image Analyzer
ULC-S135:2022-2022 STANDARD TEST METHOD FOR THE DETERMINATION OF COMBUSTIBILITY PARAMETERS OF BUILDING MATERIALS USING AN OXYGEN CONSUMPTION CALORIMETER (CONE CALORIMETER)
ASTM RR-F23-1009 2012 F1930-Test Method for Evaluation of Flame-Resistant Clothing for Protection Against Fire Simulations Using an Instrumented Manikin
ASTM RR-D01-1147 2009 D4541-Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers
ASTM RR-G01-1022 2004 G0187- Standard Test Method for Measurement of Soil Resistivity Using the Two-Electrode Soil Box Method
ASTM RR-D02-1901 2018 D8184-Test Method for Ferrous Wear Debris Monitoring in In-Service Fluids using a Particle Quantifier (PQ) Instrument

Professional Standard - Textile

FZ/T 98015-2017 Textiles thermal and water-vapour resistance apparatuses

Professional Standard - Electron

SJ/T 11386-2008 General specification of earth coninuity tester
SJ/T 10314-1992 Generic specification of resistivity measuring instrument with four-point probe
SJ/T 11385-2008 General specification of insulation resistance tester
SJ/T 10690-1996 General specification for digital direct-current micro resistance measuring instruments

Professional Standard - Electricity

DL/T 1742-2017 Elastic wire resistance type sensor readout
DL/T 845.2-2020 General specifications for measuring resistance equipment-Part 2:Power frequency ground resistance testers
DL/T 987-2005 General technical conditions of resistive current tester for zinc oxide surge arrester
DL/T 845.4-2019 General specifications for measuring resistance equipments Part 4: Loop resistance measurement testor
DL/T 967-2005 Verification regulation of loop resistance tester and DC resistance high-speed tester
DL/T 845.4-2004 General specifications for measuring resistance equipments Part 4: Loop resistance measurement testor
DL/T 1334-2014 Measuring Instrument for Piezoresistive Apparatus
DL/T 845.3-2004 General specifications for measuring resistance equipments Part 3: DC resistance meters
DL/T 845.3-2019 General specifications for measuring resistance equipments Part 3: DC resistance meters
DL/T 845.2-2004 General specifications for measuring resistance equipments Part 2: Power frequency earth resistance testers
DL/T 845.3-2019(英文版) General technical conditions for resistance measuring devices Part 3: DC resistance tester
DL/T 845.6-2022 General technical conditions for resistance measuring devices Part 6: Ground down conductor conduction resistance tester
DL/T 987-2017 General technical specifications of resistive current testers for zinc oxide surge arrester

Professional Standard - Machinery

JB/T 9233.18-1999 General methods of testing the performance of industrial process measurement and control instruments Input impedance
JB/T 7585-1994 D.C. Low Resistance Tester
JB/T 11277-2012 Non-destructive testing instruments — Single channel acoustic impedance instrument
JB/T 7585-2013 Tester for direct current low-resistence
JB/T 9233.13-1999 General methods of testing the performance of industrial process measurement and control instruments Contact resistance

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 18258-2000 Damping materials--Testing method for damping properties
GB/T 28030-2011 Earth continuity tester
GB/T 6146-1985 Test method for resistivity of precision resistance alloys
GB/T 6146-2010 Test method for resistivity of precision resistance alloys

National Metrological Technical Specifications of the People's Republic of China

JJF(电子) 24-1982 Verification method of 2K2-1 coaxial impedance measuring instrument
JJF 1620-2017 Calibration Specification for Battery Internal Resistance Testers
JJF 1285-2011 Calibration Specification for Surface Resistance Tester
JJF(机械) 073-2009 Calibration specification for loop resistance tester

工业和信息化部/国家能源局

JB/T 9386-2017 Fendulum damping teeters

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 38426-2019 Test method for thermal resistance and use temperature of sleeping bags

Professional Standard - Energy

DL/T 845.5-2021 General specifications for measuring resistance equipment's - Part 5: insulation resistance tester of inner water cooled generator

未注明发布机构

ASTM RR-D18-2002 2022 D6128-Test Method for Shear Testing of Bulk Solids Using the Jenike Shear Tester
ASTM RR-G01-1022 2004 G0187- Standard Test Method for Measurement of Soil Resistivity Using the Two-Electrode Soil Box Method
ASTM RR-F23-1009 2012 F1930-Test Method for Evaluation of Flame-Resistant Clothing for Protection Against Fire Simulations Using an Instrumented Manikin
ASTM RR-F08-1015 2018 F3340-Standard Test Method for Measuring Thermal Resistance of Camping Mattresses Using Guarded Hotplate Apparatus
ASTM RR-F08-2001 2022 F3340-Test Method for Thermal Resistance of Camping Mattresses Using a Guarded Hot Plate Apparatus
ULC-S135:2022-2022 STANDARD TEST METHOD FOR THE DETERMINATION OF COMBUSTIBILITY PARAMETERS OF BUILDING MATERIALS USING AN OXYGEN CONSUMPTION CALORIMETER (CONE CALORIMETER)
ASTM RR-D01-1157 2011 D7681-Test Method for Measuring Gradation of Glass Spheres Using a Flowing Stream Digital Image Analyzer
ASTM RR-D01-1147 2009 D4541-Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers
ASTM RR-D13-1130 2011 D1518-Test Method for Thermal Resistance of Batting Systems Using a Hot Plate
DIN EN 1267:1999 Valves – Test of flow resistance using water as test fluid
ASTM F1677-05 Standard Test Method for Using a Portable Inclineable Articulated Strut Slip Tester (PIAST)
ASTM RR-D02-1901 2018 D8184-Test Method for Ferrous Wear Debris Monitoring in In-Service Fluids using a Particle Quantifier (PQ) Instrument

Professional Standard - Petroleum

SY/T 6844-2011 Micro conductivity imaging logging tool
SY 6844-2011 Microresistivity Imaging Logging Tool
SY/T 6905-2012 Calibration method for liquid resistivity tools
SY 6905-2012 Liquid Resistivity Meter Calibration Method
SY 6972-2013 Through casing resistivity logging tool

国家能源局

SY/T 6844-2021 Micro-resistivity imaging logging tool

American Society for Testing and Materials (ASTM)

ASTM D3999-91(1996) Standard Test Methods for the Determination of the Modulus and Damping Properties of Soils Using the Cyclic Triaxial Apparatus
ASTM F1930-23 Standard Test Method for Evaluation of Flame-Resistant Clothing for Protection Against Fire Simulations Using an Instrumented Manikin
ASTM F1930-18 Standard Test Method for Evaluation of Flame-Resistant Clothing for Protection Against Fire Simulations Using an Instrumented Manikin
ASTM D6587-12 Standard Test Method for Yarn Number Using Automatic Tester
ASTM D4622-86(1993) Standard Test Method for Rock Mass Monitoring Using Inclinometers
ASTM D6587-12(2018) Standard Test Method for Yarn Number Using Automatic Tester
ASTM F1678-96 Standard Test Method for Using a Portable Articulated Strut Slip Tester (PAST)
ASTM G57-95a(2001) Standard Test Method for Field Measurement of Soil Resistivity Using the Wenner Four-Electrode Method
ASTM G57-95A Standard Test Method for Field Measurement of Soil Resistivity Using the Wenner Four-Electrode Method
ASTM D4366-14 Standard Test Methods for Hardness of Organic Coatings by Pendulum Damping Tests
ASTM E303-93(2018) Standard Test Method for Measuring Surface Frictional Properties Using the British Pendulum Tester
ASTM D4541-09 Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers
ASTM E408-13(2019) Standard Test Methods for Total Normal Emittance of Surfaces Using Inspection-Meter Techniques
ASTM D5277-92(2002) Standard Test Method for Performing Programmed Horizontal Impacts Using an Inclined Impact Tester
ASTM D8328-24 Standard Test Method for Dynamic Testing of Powders Using the Freeman Technology FT4 Powder Rheometer
ASTM F1467-18 Standard Guide for Use of an X-Ray Tester (≈10 keV Photons) in Ionizing Radiation Effects Testing of Semiconductor Devices and Microcircuits
ASTM D5099-93(2003) Standard Test Methods for Rubber-Measurement of Processing Properties Using Capillary Rheometry
ASTM F673-90(1996)e1 Standard Test Methods for Measuring Resistivity of Semiconductor Slices or Sheet Resistance of Semiconductor Films with a Noncontact Eddy-Current Gage
ASTM B794-97(2009) Standard Test Method for Durability Wear Testing of Separable Electrical Connector Systems Using Electrical Resistance Measurements
ASTM D5099-93(1998) Standard Test Methods for Rubber-Measurement of Processing Properties Using Capillary Rheometry
ASTM D8184-18 Standard Test Method for Ferrous Wear Debris Monitoring in In-Service Fluids Using a Particle Quantifier Instrument
ASTM C627-10e1 Standard Test Method for Evaluating Ceramic Floor Tile Installation Systems Using the Robinson-Type Floor Tester
ASTM D8184-18e1 Standard Test Method for Ferrous Wear Debris Monitoring in In-Service Fluids Using a Particle Quantifier Instrument
ASTM G57-06(2012) Standard Test Method for Field Measurement of Soil Resistivity Using the Wenner Four-Electrode Method
ASTM D4541-22 Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers
ASTM C627-18 Standard Test Method for Evaluating Ceramic Floor Tile Installation Systems Using the Robinson-Type Floor Tester
ASTM D6230-98(2005) Standard Test Method for Monitoring Ground Movement Using Probe-Type Inclinometers
ASTM G187-12 Standard Test Method for Measurement of Soil Resistivity Using the Two-Electrode Soil Box Method
ASTM G187-05 Standard Test Method for Measurement of Soil Resistivity Using the Two-Electrode Soil Box Method
ASTM G187-12a Standard Test Method for Measurement of Soil Resistivity Using the Two-Electrode Soil Box Method
ASTM E3367-23 Standard Test Method for Determining the Combustion Behavior of Layered Assemblies using a Cone Calorimeter
ASTM F1868-23 Standard Test Method for Thermal Resistance, Evaporative Resistance, and Total Heat Loss Measurements of Clothing Materials Using a Sweating Hot Plate
ASTM B794-97(2020) Standard Test Method for Durability Wear Testing of Separable Electrical Connector Systems Using Electrical Resistance Measurements
ASTM D5335-08 Standard Test Method for Linear Coefficient of Thermal Expansion of Rock Using Bonded Electric Resistance Strain Gauges
ASTM E303-93(1998) Standard Test Method for Measuring Surface Frictional Properties Using the British Pendulum Tester
ASTM D3464-96(2014) Standard Test Method for Average Velocity in a Duct Using a Thermal Anemometer
ASTM D5335-99 Standard Test Method for Linear Coefficient of Thermal Expansion of Rock Using Bonded Electric Resistance Strain Gages
ASTM B794-97(2015) Standard Test Method for Durability Wear Testing of Separable Electrical Connector Systems Using Electrical Resistance Measurements
ASTM E2583-07(2015) Standard Test Method for Measuring Deflections with a Light Weight Deflectometer (LWD)
ASTM D5335-04 Standard Test Method for Linear Coefficient of Thermal Expansion of Rock Using Bonded Electric Resistance Strain Gages
ASTM F1677-96 Standard Test Method for Using a Portable Inclineable Articulated Strut Slip Tester (PIAST)
ASTM D5485-16 Standard Test Method for Determining the Corrosive Effect of Combustion Products Using the Cone Corrosimeter
ASTM D7891-24 Standard Test Method for Shear Testing of Powders Using the Freeman Technology FT4 Powder Rheometer Shear Cell
ASTM D7404-07 Standard Test Method for Determination of Emulsified Asphalt Residue by Moisture Analyzer
ASTM D4060-10 Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser
ASTM F78-97(2002) Standard Test Method for Calibration of Helium Leak Detectors by Use of Secondary Standards
ASTM D7404-07(2016) Standard Test Method for Determination of Emulsified Asphalt Residue by Moisture Analyzer
ASTM D1559-89 Test Method for Resistance of Plastic Flow of Bituminous Mixtures Using Marshall Apparatus
ASTM E2307-20 Standard Test Method for Determining Fire Resistance of Perimeter Fire Barriers Using Intermediate-Scale, Multi-story Test Apparatus
ASTM E2244-05 Standard Test Method for In-Plane Length Measurements of Thin, Reflecting Films Using an Optical Interferometer
ASTM D5454-11(2020) Standard Test Method for Water Vapor Content of Gaseous Fuels Using Electronic Moisture Analyzers
ASTM D5454-93(1999) Standard Test Method for Water Vapor Content of Gaseous Fuels Using Electronic Moisture Analyzers
ASTM D7404-07(2012) Standard Test Method for Determination of Emulsified Asphalt Residue by Moisture Analyzer
ASTM E2058-13a Standard Test Methods for Measurement of Material Flammability Using a Fire Propagation Apparatus (FPA)
ASTM D5099-08(2017) Standard Test Methods for Rubber&x2014Measurement of Processing Properties Using Capillary Rheometry
ASTM D5454-04 Standard Test Method for Water Vapor Content of Gaseous Fuels Using Electronic Moisture Analyzers
ASTM E2307-15be1 Standard Test Method for Determining Fire Resistance of Perimeter Fire Barriers Using Intermediate-Scale, Multi-story Test Apparatus
ASTM E2307-19 Standard Test Method for Determining Fire Resistance of Perimeter Fire Barriers Using Intermediate-Scale, Multi-story Test Apparatus

AASHTO - American Association of State Highway and Transportation Officials

T 245-2013 Standard Method of Test for Resistance to Plastic Flow of Asphalt Mixtures Using Marshall Apparatus
T 245-2014 Standard Method of Test for Resistance to Plastic Flow of Asphalt Mixtures Using Marshall Apparatus
T 245-1997 Standard Method of Test for Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus
T245-1997 Standard Method of Test for Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus (Nineteenth Edition; ASTM D1559-76)
T 278-1990 Standard Method of Test for Surface Frictional Properties Using the British Pendulum Tester
TP48-1994 Standard Test Method for Determinations of Unfilled Asphalts Using the Brookfield Thermosel Apparatus (Edition 1A)
TP 89-2013 Standard Method of Test for Measuring Adhesion of Hot-Poured Crack Sealant Using Direct Adhesion Tester
TP 89-2010 Standard Method of Test for Measuring Adhesion of Hot-Poured Crack Sealant Using Direct Adhesion Tester

The American Road & Transportation Builders Association

AASHTO T 245-2015 Standard Method of Test for Resistance to Plastic Flow of Asphalt Mixtures Using Marshall Apparatus
AASHTO T 245-2014 Standard Method of Test for Resistance to Plastic Flow of Asphalt Mixtures Using Marshall Apparatus
AASHTO T 245-2013 Standard Method of Test for Resistance to Plastic Flow of Asphalt Mixtures Using Marshall Apparatus
AASHTO T 278-90(R2017) Standard Method of Test for Surface Frictional Properties Using the British Pendulum Tester
AASHTO T 278-1990(R2007) Standard Method of Test for Surface Frictional Properties Using the British Pendulum Tester
AASHTO TP 89-2010(R2016) Standard Method of Test for Measuring Adhesion of Hot-Poured Crack Sealant Using Direct Adhesion Tester
AASHTO TP 89-2013 Standard Method of Test for Measuring Adhesion of Hot-Poured Crack Sealant Using Direct Adhesion Tester
AASHTO TP 89-2010 Standard Method of Test for Measuring Adhesion of Hot-Poured Crack Sealant Using Direct Adhesion Tester
AASHTO TP 134-2019(R2021) Standard Method of Test for Stress Sweep Rutting (SSR) Test Using Asphalt Mixture Performance Tester (AMPT)

Korean Agency for Technology and Standards (KATS)

KS K ISO 13506-2019 Protective clothing against heat and flame－Test method for complete garments－Prediction of burn injury using an instrumented manikin
KS F 2375-2021 Testing method for measuring surface frictional properties using the British Pendulum Tester
KS M 6695-2021 Testing method of crack growth using Demattia flex-cracking apparatus
KS M 6695-2016 Testing method of crack growth using Demattia flex-cracking apparatus
KS C 1302-2019 Insulation resistance testers(battery operated)
KS C 1302-2014(2019) Insulation resistance testers(battery operated)
KS B 5648-2022 Pressure test method and vacuum vessel leak detection methodusing mass spectrometer
KS F 2337-1995 Testing methods for resistance to plastic flow of bituminous mixtures using marshall apparatus
KS L ISO 4787:2016 Laboratory glassware－Volumetric glassware－Methods for use and testing of capacity
KS C 1706-2020 Instrument transformers for testing purpose and used with general instrument
KS L ISO 4787:2006 Laboratory glassware-Volumetric glassware-Methods for use and testing of capacity
KS T 1315-2020 Testing method for blocking
KS B 5648-2002(2022) Pressure test method and vacuum vessel leak detection methodusing mass spectrometer
KS C 1221-2014 Polygraphs for clinical use
KS C 1301-2020 Insulation resistance testers(magneto generator operated)
KS T 1315-2015(2020) Testing method for blocking
KS F 2373-2020 Standard test method for measuring pavement roughness using a 7.6 m profilograph
KS M 6695-2016(2021) Testing method of crack growth using Demattia flex-cracking apparatus
KS C 1221-1989(2009) Polygraphs for clinical use
KS M 6695-1984 Testing method of crack growth using Demattia flex-cracking apparatus
KS C 0263-2002(2017) Testing methods of resistivity germanium
KS C 0263-2002(2022) Testing methods of resistivity germanium

ES-UNE

UNE-EN ISO 16852:2017 Flame arresters - Performance requirements, test methods and limits for use (ISO 16852:2016)
UNE-EN ISO 21546:2021 Paints and varnishes - Determination of the resistance to rubbing using a linear abrasion tester (crockmeter) (ISO 21546:2019)
UNE-EN 60749-40:2011 Semiconductor devices - Mechanical and climatic test methods - Part 40: Board level drop test method using a strain gauge (Endorsed by AENOR in November of 2011.)
UNE-EN ISO 4787:2021 Laboratory glass and plastic ware - Volumetric instruments - Methods for testing of capacity and for use (ISO 4787:2021) (Endorsed by Asociación Española de Normalización in February of 2022.)

British Standards Institution (BSI)

BS EN ISO 4787:2011 Laboratory glassware. Volumetric instruments. Methods for testing of capacity and for use
BS EN ISO 16852:2016 Flame arresters. Performance requirements, test methods and limits for use
BS 7334-4:1992 Measuring instruments for building construction. Methods for determining accuracy in use of theodolites
BS ISO 21283:2018 Iron ores. Determination of specific surface area. Test method using air-permeability apparatus (Blaine)
BS EN ISO 4787:2010 Laboratory glassware - Volumetric instruments - Methods for testing of capacity and for use
BS ISO 13506:2008 Protective clothing against heat and flame - Test method for complete garments - Prediction of burn injury using an instrumented manikin
BS 7334-3:1990 Measuring instruments for building construction. Methods for determining accuracy in use: optical levelling instruments
BS EN ISO 21546:2020 Paints and varnishes. Determination of the resistance to rubbing using a linear abrasion tester (crockmeter)
BS 7334-5:1992 Measuring instruments for building construction. Methods for determining accuracy in use of optical plumbing instruments
BS 7334-6:1992 Measuring instruments for building construction - Methods for determining accuracy in use of laser instruments
BS EN 592:2002 Instructions for use for in vitro diagnostic instruments for self-testing
24/30463869 DC BS ISO 18511-2 Tyre abrasion rate measurement methods - Part 2: Indoor test method by using an abrasion tester on external drum
BS 7334-8:1992 Measuring instruments for building construction. Methods for determining accuracy in use of electronic distance-measuring instruments up to 150 m
21/30441324 DC BS ISO/IEC 80079-49. Flame arresters - Part 49. Performance requirements, test methods and limits for use

SCC

UNE-EN 12874:2002 Flame arresters - Performance requirements, test methods and limits for use.
DIN 55654:2015 Scratch test using a linear abrasion tester (crockmeter)
DIN 55654 E:2015 Draft Document - Scratch test using a linear abrasion tester (crockmeter)
AS 1289.F3.2:1984 Methods of testing soil for engineering purposes - Part F - Soil strength and consolidation tests - Determination of the penetration resistance of a soil using the 9 kg dynamic cone penetrometer
NS-EN ISO 16852:2016 Flame arresters — Performance requirements, test methods and limits for use (ISO 16852:2016)
DANSK DS/EN ISO 16852:2016 Flame arresters – Performance requirements, test methods and limits for use (ISO 16852:2016)
AENOR UNE-EN ISO 16852:2017 Flame arrester. Operating requirements, test methods and limits of use. (ISO 16852:2016).
ESD SP15.1-2005 In-Use Resistance Testing of Gloves and Finger Cots
NS 4000:1967 Pressure test of plastic bags by the use of the EPPT-tester
ASTM A937-01 Standard Test Method for Determining Interlaminar Resistance of Insulating Coatings Using Two Adjacent Test Surfaces
BS 4826-9:1975 Methods of test for complete, filled transport packages-Stacking test using compression tester
DANSK DS/EN ISO 4787:2011 Laboratory glassware – Volumetric instruments – Methods for testing of capacity and for use
NS-EN 12874:2001 Flame arresters — Performance requirements, test methods and limits for use
UNE-EN 1267:2000 VALVES - TEST OF FLOW RESISTANCE USING WATER AS TEST FLUID.
DIN ISO 16852 E:2006 Draft Document - Flame arresters - Performance requirements, test methods and limits for use (ISO/DIS 16852:2006)
DANSK DS/EN 12874:2001 Flame arresters - Performance requirements, test methods and limits for use
DIN EN ISO 16852 E:2014 Draft Document - Flame arresters - Performance requirements, test methods and limits for use (ISO/DIS 16852:2014); German version prEN ISO 16852:2014
AS 1580.601.3:1975 Paints and related materials - Methods of test, Method 601.3: Colour - Instrumental measurement of colour difference using the 'Color Eye'
DIN EN 1267 E:2009 Draft Document - Industrial valves - Test of flow resistance using water as test fluid; German version prEN 1267:2009
DANSK DS/ISO 21546:2019 Paints and varnishes – Determination of the resistance to rubbing using a linear abrasion tester (crockmeter)
AS 1683.22:1983 Methods of test for rubber, Method 22: Rubber - Determination of vulcanization characteristics using the oscillating disc curemeter
AASHTO T 278-1990(2021) Standard Method of Test for Surface Frictional Properties Using the British Pendulum Tester (ASTM E 303-93(2008))
BS ISO 21546:2019 Paints and varnishes. Determination of the resistance to rubbing using a linear abrasion tester (crockmeter)
DANSK DS/EN ISO 21546:2020 Paints and varnishes – Determination of the resistance to rubbing using a linear abrasion tester (crockmeter) (ISO 21546:2019)
CEI EN 60749-40:2012 Semiconductor devices - Mechanical and climatic test methods Part 40: Board level drop test method using a strain gauge
AASHTO TP 89-2010(2016) Standard Method of Test for Measuring Adhesion of Hot-Poured Crack Sealant Using Direct Adhesion Tester
DANSK DS/EN 60749-40:2011 Semiconductor devices - Mechanical and climatic test methods - Part 40: Board level drop test method using a strain gauge
AASHTO T 245-1997(2008) Standard Method of Test for Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus
AS 1580.401.3:1990 Paints and related materials - Methods of test, Method 401.3: Drying times using a BK-type recorder
AASHTO T 245-2022 Standard Method of Test for Resistance to Plastic Flow of Asphalt Mixtures Using Marshall Apparatus
AASHTO T 245-2015(2019) Standard Method of Test for Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus
ULC 135-2004 Standard Test Method for the Determination of Combustibility Parameters of Building Materials Using an Oxygen Consumption Calorimeter (Cone Calorimeter)
UNE-EN ISO 4787:2010 Laboratory glassware - Volumetric instruments - Methods for testing of capacity and for use (ISO 4787:2010)
DANSK DS/ISO 4787:2021 Laboratory glass and plastic ware – Volumetric instruments – Methods for testing of capacity and for use
NS-EN ISO 4787:2010 Laboratory glassware — Volumetric instruments — Methods for testing of capacity and for use (ISO 4787:2010)
UNE-EN 61027:1998 INSTRUMENTS FOR THE MEASUREMENT OF AURAL ACOUSTIC IMPEDANCE/ADMITTANCE.
AASHTO TP 134-2022(2023) Standard Method of Test for Stress Sweep Rutting (SSR) Test Using Asphalt Mixture Performance Tester (AMPT)
AASHTO T 370-2017 Standard Method of Test for Measuring Adhesion of Hot-Poured Asphalt Crack Sealant Using Direct Adhesion Tester
AASHTO TP 134-2019(2021) Standard Method of Test for Stress Sweep Rutting (SSR) Test Using Asphalt Mixture Performance Tester (AMPT)

RU-GOST R

GOST R 59594-2021 Soils. Field test methods with the use of resistivity cone penetration
GOST R IEC 61241-2-2-1999 Electrical apparatus for use in the presence of combustible dust. Part 2. Test methods. Section 2. Method for determining the electrical resistivity of dust in layers
GOST 8.493-1983 State system for ensuring the uniformity of measurements. Coaxial impedance meters. Methods and means of verification

American National Standards Institute （ANSI)

ANSI/ASTM F1678:1997 Test Method for Using a Portable Articulated Strut Slip Tester (PAST)
ANSI/ASA S3.39-1987 Specifications for Instruments to Measure Aural Acoustic Impedance and Admittance (Aural Acoustic Immittance)
ANSI/ASTM E2307:2010 Test Method for Determining Fire Resistance of Perimeter Fire Barriers Using Intermediate-Scale, Multi-Story Test Apparatus

Association Francaise de Normalisation

NF B35-309:2011 Laboratory glassware - Volumetric instruments - Methods for testing of capacity and for use.
NF EN ISO 17654:2011 Resistance welding - Destructive testing of welds - Pressure testing of welds by resistance using a roll
NF EN ISO 16852:2017 Flame arresters - Performance requirements, test methods and limits of use
NF S66-402*NF EN ISO 16852:2017 Flame arresters - Performance requirements, test methods and limits for use
NF C97-615:1993 Instruments for the measurement of aural acoustic impedance/admittance.
NF EN 60749-40:2012 Semiconductor devices - Mechanical and climatic test methods - Part 40: Board-level drop test method using a strain gauge
NF B35-309*NF EN ISO 4787:2021 Laboratory glass and plastic ware - Volumetric instruments - Methods for testing of capacity and for use
NF E10-022:1991 Measuring instruments. Inspection data sheet.

German Institute for Standardization

DIN EN ISO 16852:2017 Flame arresters - Performance requirements, test methods and limits for use (ISO 16852:2016)
DIN EN ISO 21546:2021-02 Paints and varnishes - Determination of the resistance to rubbing using a linear abrasion tester (crockmeter) (ISO 21546:2019); German version EN ISO 21546:2020
DIN IEC 61336:1999 Nuclear instrumentation - Thickness measurement systems utilizing ionizing radiation - Definitions and test methods (IEC 61336:1996)
DIN EN 60749-40:2012-02 Semiconductor devices - Mechanical and climatic test methods - Part 40: Board level drop test method using a strain gauge (IEC 60749-40:2011); German version EN 60749-40:2011
DIN 10956:2007 Apparatus for sensory analysis - Universal testing glasses and lids - Requirements and instructions for use

YU-JUS

JUS N.A5.544-1989 Bigh-voltage test technicpies. Application gui?e for measuring ?evices

Electrostatic Discharge Association (ESDA)

ANSI/ESD SP15.1-2011 In-Use Resistance Testing of Gloves and Finger Cots

European Committee for Standardization (CEN)

EN ISO 4787:2010 Laboratory glassware - Volumetric instruments - Methods for testing of capacity and for use
EN ISO 4787:2021 Laboratory glass and plastic ware - Volumetric instruments - Methods for testing of capacity and for use (ISO 4787:2021)
EN ISO 4787:2011 Laboratory glassware - Volumetric instruments - Methods for testing of capacity and for use (ISO 4787:2010, Corrected version 2010-06-15)
EN 1267:2012 Industrial valves - Test of flow resistance using water as test fluid

IN-BIS

IS 5514-1969 Specifications for the instrument used in the "LE-CHATELIER" test
IS 10656-1983 Technical Specifications for Insulation Resistance Tester (Electronic Type)

NO-SN

NS 4000-1967 Pressure test of plastic bags by the use of the EPPT-tester

US-FCR

FCR COE CRD-C 53-01-2001 TEST METHOD FOR CONSISTENCY OF NO-SLUMP CONCRETE USING THE MODIFIED VEBE APPARATUS

International Organization for Standardization (ISO)

ISO 4787:2010 Laboratory glassware - Volumetric instruments - Methods for testing of capacity and for use
ISO/IEC DIS 80079-49 Explosive atmospheres — Part 49: Flame arresters — Performance requirements, test methods and limits for use

ES-AENOR

UNE 115-215-1991 Earth moving machinery. Operation and maintenance. Training of mechanics

Indonesia Standards

SNI 4427-2008 Testing methods of hardness surface frictional properties using British Pendulum Tester (BPT)
SNI 03-0450-1989 Test method for reactive alkaline properties of cement with concrete aggregates using stirring rod.

VN-TCVN

TCVN 1044-2011 Laboratory glassware - Volumetric instruments Methods for testing of capacity and for use

GSO

BH GSO ISO 16852:2016 Flame arresters -- Performance requirements, test methods and limits for use
BH GSO ISO 4787:2017 Laboratory glassware -- Volumetric instruments -- Methods for testing of capacity and for use
OS GSO ISO 16852:2013 Flame arresters -- Performance requirements, test methods and limits for use
GSO ISO 16852:2013 Flame arresters -- Performance requirements, test methods and limits for use
OS GSO ISO 4787:2015 Laboratory glassware -- Volumetric instruments -- Methods for testing of capacity and for use
GSO IEC 60749-40:2015 Semiconductor devices - Mechanical and climatic test methods - Part 40: Board level drop test method using a strain gauge
GSO ISO 17493:2013 Clothing and equipment for protection against heat -- Test method for convective heat resistance using a hot air circulating oven
BH GSO ISO 20495:2022 Traditional Chinese medicine — Skin electrical resistance measurement devices

Danish Standards Foundation

DS/EN ISO 16852:2010 Flame arresters - Performance requirements, test methods and limits for use
DS/EN ISO 4787:2011 Laboratory glassware - Volumetric instruments - Methods for testing of capacity and for use

HU-MSZT

MSZ 8880/2.lap-1963 Electrical product testing tools and testing methods. Use instruments

SE-SIS

SIS SS IEC 477:1982 Electrical measuring instruments - Laborator/ resistors
SIS SS-ISO 6487:1981 Road vehicles -Techniques of measure- ment in impact tests - Instrumentation

CZ-CSN

CSN 35 6512-1988 Electronic measuring instruments. General requirements on firmness and resistance at performance of mechanical influences and testing methods
CSN ISO 3036:1994 Board - Determination of puncture resistance

PT-IPQ

NP EN 13523-3-2002 Coil coated metals Test methods Part 3:Colour difference-Instrumental comparison

TH-TISI

TIS 1294-1995 Standard test method for flash point of cutback asphalt with tag open-cup

Standard Association of Australia （SAA）

AS 1580.401.3:2002(R2013) Test Methods for Paints and Related Materials Drying Time Using the Model BK Recorder

IT-UNI

UNI 7629-1976 Paper test. Air permeability determination using Gurley instrument
UNI 7630-1976 Paper test. Air permeability determination using Bendtsen instrument

RO-ASRO

STAS 10442/4-1976 FIXED RESISTORS Methods of lest

NL-NEN

NEN 11027-1993 Instruments for the measurement of aural acoustic impedance/admittance (IEC 1027:1991)

Japanese Industrial Standards Committee (JISC)

JIS B 7602:2009 Calibration and test method for force-proving instruments

Others: