Edible oil storage tank

Edible oil storage tank, Total:245 items.

The international standard classification for "Edible oil storage tank" includes: Petroleum products and natural gas handling equipment , Occupational safety. Industrial hygiene , Fire-protection , Volumetric equipment and measurements , Explosion protection , Fire-fighting .

The Chinese standard classification for "Edible oil storage tank" includes: Oil and gas gathering and transportation equipment , Hygiene, safety and labor protection , Fire-fighting equipment and devices , Petroleum products in general , Petrochemical and chemical industry engineering , Factory fire and blast protection technology , Fire extinction technology .

Professional Standard - Petroleum

SY/T 6517-2001 Overfill protection for storage tanks in petroleum facilities
SY/T 0525.5-1993 oil tank dipstick
SY/T 6820-2011 Requirements for Safe Entry and Cleaning of Petroleum Storage Tanks
SY/T 0525.2-1993 Rotary joint of petroleum tank
SY 0511.1-2010 Petroleum storage tank accessories part 1: Breathing valves
SY/T 0512-1996 Oil storage tank flame arrester
SY/T 0525.3-1993 Oil tank air foam generator
SY/T 0525.4-1993 Petroleum storage tank steel hole accessories
SY/T 0525.1-1993 Oil storage tank hydraulic safety valve
SY/T 0511.1-2010 Il Tank Appurtenances. Part 1: Breather Valve
SY/T 6517-2010 Overfill Protection for Storage Tanks in Petroleum Facilities
SY/T 0511.9-2010 Oil Tank Appurtenances - Part 9: Dip Hatch
SY 6306-2014 Safety and technical specification for steel oil tanks
SY 6306-2020 Safety specification for the operation of steel crude oil storage tanks
SY 0511.9-2010 Petroleum storage tank accessories part 9: dipstick
SY/T 0511-1996 Petroleum storage tank breathing valve

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB 5908-2005 Flame arresters for petroleum tanks
GB/T 50938-2013 Technical Code for Low Temperature Steel Storage Tanks in Petrochemical Engineering
GB/T 13236-2011 Dip-tapes and steel strapping tapes for petroleum--Specification

Military Standard of the People's Republic of China-General Armament Department

GJB 4219-2001 Specifications for soft oil storage tanks
GJB 5069-2001 Specifications for soft oil storage tanks
GJB 8079-2013 The calibration of special cave oil tank capacity

工业和信息化部/国家能源局

JB/T 13138-2017 Cleaning equipment for oil tank

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence

GJB 5986-2007 Specification for fabric for polyurethane collapsible fuel storage tank

未注明发布机构

DIN EN 13341 E:2018-11 Static thermoplastic tanks for above ground storage of domestic heating oils, kerosene and diesel fuels - Blow moulded and rotationally moulded polyethylene tanks and rotationally moulded tanks made of anionically polymerized polyamide 6 - Requirements...
AS 4976:2008(R2016) The removal and disposal of underground petroleum storage tanks
CSA B376-2022 Portable tanks for gasoline and other petroleum fuels

Professional Standard-Safe Production

AQ/T 3001-2021 Specifications of separate and explosion-proof techniques for oil(gas)storage tanks in petrol (gas) stations
AQ 3001-2005 Technology-separate and explosion-proof of gasoline gas filling station and light-fuel LPG tank of transportation by truck

Hubei Provincial Standard of the People's Republic of China

DB42/T 421-2007 Safety technical specification for oil tank body cleaning

Group Standards of the People's Republic of China

T/ZZB 2887-2022 Fire resistant vacuum pressure breathing valve for petrol storage tank
T/CATSI 05004-2021 Small liquefied petroleum gas (commercial propane) storage tank

应急管理部

XF/T 1275-2015 Guidelines for oil storage tanks firefighting

国家能源局

SY/T 6306-2020 Safety specification for steel oil tanks

Professional Standard - Public Safety Standards

GA/T 1275-2015 Guidelines for oil storage tanks firefighting

Guangxi Provincial Standard of the People's Republic of China

DB45/T 1750-2018 Safety regulations for maintenance of liquefied petroleum gas storage tanks

Guangdong Provincial Standard of the People's Republic of China

DB44/T 1231-2013 Safety regulations for maintenance of liquefied petroleum gas storage tanks

Hebei Provincial Standard of the People's Republic of China

DB13/T 1651-2012 Inspection rules for buried liquefied petroleum gas storage tanks

Professional Standard - Petrochemical Industry

SH/T 3007-2007 Specification for Design of Tank Farms for Petrochemical Storage
SH 3007-1999 Code for the design of tank farms in petrochemical storage and transportation system
SH/T 3007-2014 Specification for Design of Tank Farms for Petrochemical Storage
SH/T 3512-2011 Technical specification for construction of spherical tanksin petrochemical industry

SCC

NS 1543:1974 Steel oil storage tanks - Rectangular tanks for indoor use
BS 799-5:1975 Specification for oil burning equipment-Oil storage tanks
CAN/ULC-S602-2007 ABOVEGROUND STEEL TANKS FOR FUEL OIL AND LUBRICATING OIL
UNE-EN 13109:2003 LPG tanks - Disposal
NS-EN 13109:2002 LPG tanks — Disposal
CAN/ULC-S602-2014(R2023) STANDARD FOR ABOVEGROUND STEEL TANKS FOR FUEL OIL AND LUBRICATING OIL
CAN/ULC-S602-M92-1992 Standard for Aboveground Steel Tanks for Fuel Oil and Lubricating Oil
ULC C525-1975 Guide for the Investigation of Flame Arresters for Use on Vents of Storage Tanks for Petroleum Oil and Gasoline
ULC-S652-1993 Standard for Tank Assemblies for Collection of Used Oil
NS-EN 13341:2005+A1:2011 Static thermoplastic tanks for above ground storage of domestic heating oils, kerosene and diesel fuels - Blow moulded and rotationally moulded polyethylene tanks and rotationally moulded tanks made of anionically polymerized polyamide 6 - Requirements...
VDI 3479-2010 Emissions reduction — mineral oil tankers away from refineries
NS-EN 14129:2004 Pressure relief valves for LPG tanks
CAN/ULC-S602-2014(C2023) STANDARD FOR UNBURIED STEEL TANKS FOR FUEL OIL AND LUBRICATING OIL
NS 1542:1973 Steel oil storage tanks - U-shaped tanks 0,8 to 3,2 cubic metre, for indoor use
07/30172345 DC BS EN 15724. Thermoplastics static tanks for above ground storage of domestic heating oils, kerosene and diesel fuels. Secondary containments used with tanks complying with EN 13341. Requirements and test methods
CAN/ULC-S652-2008 Standard forTank Assemblies for the Collection, Storage and Removal of Used Oil
NS-EN 13799:2002 Contents gauges for LPG tanks
UNE-EN 14129:2005 Pressure relief valves for LPG tanks.
CAN 4-S615-M83-1983 Standard underground reinforced plastic tanks for petroleum products
ULC-S615-1977 Reinforced Plastic Underground tanks for Petroleum Products
CAN/CSA-B211-2000(R2015) Energy Efficiency of Oil-Fired Storage Tank Water Heaters
DIN EN 15724 E:2007 Draft Document - Thermoplastics static tanks for above ground storage of domestic heating oils, kerosene and diesel fuels - Secondary containments used with tanks complying with EN 13341 - Requirements and test methods; German version prEN 15724:2007
ULC 602-2014 Standard for Aboveground Steel Tanks for Fuel Oil and Lubricating Oil (CAN/ULC S602-14)
UNE-EN 13799:2003 Contents gauges for LPG tanks.
AS 2624:1983 Steel plate and strip for the construction of welded steel tanks for oil storage
NS 1540:1986 Steel oil tanks for atmospheric storage - Horizontal, cylindrical tanks 1,2 to 50 cubic metres for underground installation
NS-EN 13341:2005 Thermoplastics static tanks for above ground storage of domestic heating oils, kerosene and diesel fuels - Blow moulded polyethylene, rotationally moulded polyethylene and polyamide 6 by anionic polymerization tanks - Requirements and test methods
ULC 652-2016 Standard for Tank Assemblies for the Collection, Storage and Removal of Used Oil (CAN/ULC-S652:2016)
UNE 53496-2:2007 Plastics. Glass reinforced plastic tanks, in the air or in hold, for storaging fuel-oil. Part 2: Specifications for horizontal and vertical tanks
NS-EN 14071:2004 Pressure relief valves for LPG tanks — Ancillary equipment
BS 976-4:1997 Underground tanks of glass-reinforced plastics (GRP). Horizontal cylindrical tanks for the non-pressure storage of liquid petroleum based fuels. Part 4. Transport, handling, storage and installation of double wall tanks
DIN EN 13109 E:2009 Draft Document - LPG equipment and accessories - Liquefied petroleum gas tanks - Disposal; German version prEN 13109:2009

ZA-SANS

SANS 10131:2004 Above-ground storage tanks for petroleum products
SANS 10089-3:1999 The petroleum industry Part 3: The installation of underground storage tanks, pumps/dispensers and pipework at service stations and consumer installations

Korean Agency for Technology and Standards (KATS)

KS B 6225-2016(2021) Welded steel tanks for oil storage
KS B 6225-1980 Welded steel tanks for oil storage
KS B 6225-2016 Welded steel tanks for oil storage
KS M ISO 11223:2014 Petroleum and liquid petroleum products — Direct static measurements — Measurement of content of vertical storage tanks by hydrostatic tank gauging
KS M ISO 4512-2003(2018) Petroleum and liquefied petroleum products - Equipment for measuring liquid level in storage tanks - Manual method
KS M ISO 4266-6-2003(2018) Petroleum and liquid petroleum products - Measurement of liquid level and temperature in storage tanks by automatic method - Part 6: Temperature measurement in pressurized storage tanks (non-refrigerated)
KS B 6353-1979 Construction of cylindrical storage tanks of liquefied petroleum gas(Horizontal type)
KS B 6283-2021 Design requirements for wind load and seismic load of oil storage tanks
KS B 6353-2007(2017) Construction of cylindrical storage tanks of liquefied petroleum gas(Horizontal type)
KS B ISO 4512-2005 Petroleum and liquid petroleum products－Equipment formeasurement of liquid levels in storage tanks－Manual methods

NO-SN

NS 1543-1974 Steel oil storage tanks - Rectangular tanks for indoor use
NS 1542-1973 Steel oil storage tanks - U-shaped tanks 0,8 to 3,2 cubic metre, for indoor use
NS 1540-1986 Steel oil tanks for atmospheric storage - Horizontal, cylindrical tanks 1,2 to 50 cubic metres for underground installation

IN-BIS

IS 6202-1971 Specification for flat glass oil level gauges for oil storage tanks
IS 2007-1974 Calibration method for vertical oil storage tanks
IS 2008-1961 Calculation method of vertical oil storage tank capacity table
IS 2009-1975 Calibration methods for horizontal and tilted oil storage tanks
IS 10325-1982 Specification for 15 kg Vanaspati and Edible Oil Square Cans

API - American Petroleum Institute

API STD 650-1961 WELDED STEEL TANKS FOR OIL STORAGE
API APM 1B-1950 Cleaning Petroleum Storage Tanks
API STD 650-1988 Welded Tanks for Oil Storage (EIGHTH EDITION)
API STD 650-1970 WELDED STEEL TANKS FOR OIL STORAGE (Fourth Edition)
API STD 650 ERTA-2007 Welded Steel Tanks for Oil Storage (Tenth Edition)
API STD 650 SUPP-1963 WELDED STEEL TANKS FOR OIL STORAGE (First Edition)
API STD 650-1964 WELDED STEEL TANKS FOR OIL STORAGE (Second Edition)
API STD 650-1966 WELDED STEEL TANKS FOR OIL STORAGE (Third Edition)
API STD 650 SUPP-1967 WELDED STEEL TANKS FOR OIL STORAGE (Third Edition)
API IA-1955 Cleaning Petroleum Storage Tanks - Section A - Crude-Oil and Unfinished-Products Tanks (Second Edition)
API STD 650 CHINESE-2007 Welded Tanks for Oil Storage (Eleventh Edition)
API STD 650 ERTA-2000 Welded Tanks for Oil Storage (TENTH EDITION)
API STD 650 REV 2-1978 Welded Steel Tanks for Oil Storage (SIXTH EDITION)
API PUBL 2015-1985 Cleaning Petroleum Storage Tanks (Third Edition)
API STD 650 REV 3-1979 Welded Steel Tanks for Oil Storage (SIXTH EDITION)
API PUBL 2015-1976 Cleaning Petroleum Storage Tanks (Second Edition)
API RP 652-2005 Linings of Aboveground Petroleum Storage Tank Bottoms (Third Edition)
API RP 652 CHINESE-2014 Linings of Aboveground Petroleum Storage Tank Bottoms (FOURTH EDITION)
API RP 652 CHINESE-2005 Linings of Aboveground Petroleum Storage Tank Bottoms (Third Edition)
API RP 652-2014 Linings of Aboveground Petroleum Storage Tank Bottoms (FOURTH EDITION)
API RP 652-1997 Lining of Aboveground Petroleum Storage Tank Bottoms (Second Edition)
API RP 652-1991 Lining of Aboveground Petroleum Storage Tank Bottoms (First Edition)
API RP 2210-1982 Flame Arresters for Vents of Tanks Storing Petroleum Products
API RP 2210-1971 Flame Arresters for Vents of Tanks Storing Petroleum Products
API STD 12C-1950 Specification for welded oil storage tanks (Ninth Edition)
API STD 12C-1951 SPECIFICATION FOR WELDED OIL STORAGE TANKS (TENTH EDITION)
API RP 651-1991 Cathodic Protection of Aboveground Petroleum Storage Tanks
API STD 12C-1958 SPECIFICATION FOR WELDED OIL STORAGE TANKS (Fifteenth Edition)
API STD 12C-1941 SPECIFICATION ON ALL-WELDED OIL STORAGE TANKS (Fourth Edition)
API STD 12C-1944 SPECIFICATION ON ALL-WELDED OIL STORAGE TANKS (Sixth Edition)
API RP 2350-1987 OVERFILL PROTECTION FOR PETROLEUM STORAGE TANKS FIRST EDITION
API STD 12C-1957 SPECIFICATION FOR WELDED OIL STORAGE TANKS (Fourteenth Edition)
API STD 2501-1961 CRUDE OIL TANK MEASUREMENT AND CALIBRATION (SECOND EDITION)
API RP 1604-1996 Closure of Underground Petroleum Storage Tanks (Third Edition)
API STD 2501-1955 CRUDE-OIL TANK MEASUREMENT AND CALIBRATION (FIRST EDITION)
API STD 2015-1994 Safe Entry and Cleaning of Petroleum Storage Tanks
API BUL12C-1941 INFORMATION ON API STD. 12C: ALL-WELDED OIL STORAGE TANKS
API PUBL 2210-1982 FLAME ARRESTERS FOR VENTS OF TANKS STORING PETROLEUM PRODUCTS (SECOND EDITION)
API RP 2350-1996 Overfill Protection for Storage Tanks in Petroleum Facilities (Second Edition)
API RP 2350-2005 Overfill Protection for Storage Tanks in Petroleum Facilities (Third Edition)
API STD 12C-1940 SPECIFICATION ON ALL-WELDED OIL STORAGE TANKS (TENTATIVE) (Third Edition)
API RP 651-1997 Cathodic Protection of Aboveground Petroleum Storage Tanks (Second Edition)
API RP 651 CHINESE-2007 Cathodic Protection of Aboveground Petroleum Storage Tanks (Third Edition)
API STD 650 CHINESE-2013 Welded Tanks for Oil Storage (Twelfth Edition; ERTA: July 2013)
API RP 2015-1968 Recommended Practice for Cleaning Petroleum Storage Tanks (First Edition)
API RP 651 CHINESE-2014 Cathodic Protection of Aboveground Petroleum Storage Tanks (FOURTH EDITION)
API RP 651-2007 Cathodic Protection of Aboveground Petroleum Storage Tanks (Third Edition)
API STD 650-1980 Welded Steel Tanks for Oil Storage (Seventh Edition; Revision 1: February 1984)

US-FCR

FCR UFGS-33 65 00-2011 CLEANING PETROLEUM STORAGE TANKS
FCR UFGS-09 97 23.13-2011 INTERIOR LINING FOR CONCRETE STORAGE TANKS (FOR PETROLEUM FUELS)
FCR FED H-08-4 VOL 3 SEC III 735-1993 FUEL OIL STORAGE TANK, UNDERGROUND 8000 GALLONS AND LARGER
FCR FED FCGS 09871-1986 LINING SYSTEM, INTERIOR, FOR CONCRETE STORAGE TANKS (FOR PETROLEUM FUELS)
FCR COE CEGS 09970-2000 INTERIOR COATINGS FOR WELDED STEEL TANKS (FOR PETROLEUM FUELS)

NL-NEN

NEN 3365-1969 Jerrycans of PE for gasoline, 5 I

British Standards Institution (BSI)

BS 799-5:2010 Oil burning equipment - Carbon steel oil storage tanks - Specification
BS EN 13341:2005 Thermoplastics static tanks for above ground storage of domestic heating oils, kerosene and diesel fuels - Blow moulded polyethylene, rotationally moulded polyethylene and polyamide 6 by anionic polymerization tanks - Requirements and test methods
BS 799-5:1987 Oil burning equipment - Specification for oil storage tanks
BS EN 976-2:1997 Underground tanks of glass-reinforced plastics (GRP) - Horizontal cylindrical tanks for the non-pressure storage of liquid petroleum based fuels - Transport, handling, storage and installation of single wall tanks
BS EN 976-1:1997 Underground tanks of glass-reinforced plastics (GRP) - Horizontal cylindrical tanks for the non-pressure storage of liquid petroleum based fuels - Requirements and test methods for single wall tanks
BS ISO 4266-6:2002 Petroleum and liquid petroleum products - Measurement of level and temperature in storage tanks by automatic methods - Measurement of temperature in pressurized storage tanks (non-refrigerated)
BS ISO 4266-3:2002 Petroleum and liquid petroleum products - Measurement of level and temperature in storage tanks by automatic methods - Measurement of level in pressurized storage tanks (non-refrigerated)
BS EN 13341:2005+A1:2011 Static thermoplastic tanks for above ground storage of domestic heating oils, kerosene and diesel fuels. Blow moulded and rotationally moulded polyethylene tanks and rotationally moulded tanks made of anionically polymerized polyamide 6. Requirements and
BS ISO 4512:2000 Manual method of measuring liquid level in storage tanks for petroleum and liquid petroleum products
BS ISO 4266-1:2002 Petroleum and liquid petroleum products - Measurement of level and temperature in storage tanks by automatic methods - Measurement of level in atmospheric tanks
BS ISO 4266-4:2002 Petroleum and liquid petroleum products - Measurement of level and temperature in storage tanks by automatic methods - Measurement of temperature in atmospheric tanks
BS ISO 4512:2001 Petroleum and liquid petroleum products. Equipment for measurement of liquid levels in storage tanks. Manual methods
BS ISO 7507-3:2007 Petroleum and liquid petroleum products - Calibration of vertical cylindrical tanks - Optical-triangulation method
BS ISO 4266-4:2023 Petroleum and liquid petroleum products. Measurement of level and temperature in storage tanks by automatic methods - Measurement of temperature in atmospheric tanks
BS ISO 4512:2000(2001) Petroleum and liquid petroleum products — Equipment for measurement of liquid levels in storage tanks — Manual methods
BS ISO 4266-1:2023 Petroleum and liquid petroleum products. Measurement of level and temperature in storage tanks by automatic methods - Measurement of level in atmospheric tanks

Association Francaise de Normalisation

NF M88-560:2005 Thermoplastics static tanks for above ground storage of domestic heating oils, kerosene and diesel fuels - Blow moulded polyethylene, rotationally moulded polyethylene and polyamide 6 by anionic polymerization tanks - Requirements and test methods.
NF EN 13341/IN1:2011 Static thermoplastic tanks intended for the unburied storage of domestic heating oil, kerosene and diesel - Blow and rotation molded polyethylene tanks and rotationally molded tanks manufactured...
NF EN 13341+A1:2011 Static thermoplastic tanks intended for the unburied storage of domestic heating oil, kerosene and diesel - Blow and rotation molded polyethylene tanks and rotationally molded tanks manufactured...
NF M88-551:1988 STORAGE TANKS. GLASS FIBRE REINFORCED PLASTIC STORAGE TANKS. UNDERGROUND TANKS FOR DOMESTIC FUER,GAS OIL,KEROSENE.
NF M88-560:1986 Storage tanks. Plastics tanks for above ground storage of domestic fuel oil. Design. Inspection.
NF M88-555-2*NF EN 976-2:1997 Underground tanks of glass-reinforced plastics (GRP). Horizontal cylindrical tanks for the non-pressure storage of liquid petroleum based fuels. Part 2 : transport, handling, storage and installation of single wall tanks.
NF EN 12805:2003 Composants pour véhicules au GPL - Réservoirs
NF M88-555-1*NF EN 976-1:1997 Underground tanks of glass-reinforced plastics (GRP). Horizontal cylindrical tanks for the non-pressure storage of liquid petroleum based fuels. Part 1 : requirements and test methods for single wall tanks.
NF EN 13109:2011 Équipements et accessoires pour GPL - Réservoirs pour GPL - Élimination

United States Navy

NAVY UFGS-33 65 00-2011 CLEANING PETROLEUM STORAGE TANKS
NAVY UFGS-09 97 23.13-2011 INTERIOR LINING FOR CONCRETE STORAGE TANKS (FOR PETROLEUM FUELS)

RO-ASRO

STAS 10844-1987 Canned food FISH TINS IN OIL
STAS 10844/A1-1996 Canned food - Fish tins in oil
STAS 6579-1971 Storage tanks for crude oii and liquid petroleum pnoducts. VERTICAL WELDED CYLIN- DRICAL TANKS
STAS 6578-1978 Storage tanks for crude oil and liquid petroleum products VERTICAL WELDED CYLINDRICAL TANKS Equipment mandatory prescriptions
STAS 9367-1973 Petroleum equipment COILERS FOR OIL TANKS

TR-TSE

TS 3298-1979 Welded Tanks Used For Crude Oil Storage
TS 892-1970 EDIBLE RAPESEED OIL

GSO

GSO 2119:2011 Oil & Gas Atmospheric Tanks Specifications – Manufacture of Atmospheric Tanks
GSO 2120:2011 Oil & Gas Small Tanks Specifications – Manufacture of Small Tanks
OS GSO ISO 11223:2015 Petroleum and liquid petroleum products -- Direct static measurements -- Measurement of content of vertical storage tanks by hydrostatic tank gauging
SY/T 6306-2014 Safety specification for operation of steel crude oil storage tanks
GSO ISO 7507-1:2008 Petroleum and liquid petroleum products - Calibration of vertical cylindrical tanks - Part 1: Strapping method
OS GSO ISO 4266-1:2015 Petroleum and liquid petroleum products -- Measurement of level and temperature in storage tanks by automatic methods -- Part 1: Measurement of level in atmospheric tanks
GSO ISO 11223:2015 Petroleum and liquid petroleum products -- Direct static measurements -- Measurement of content of vertical storage tanks by hydrostatic tank gauging
OS GSO ISO 4266-4:2011 Petroleum and liquid petroleum products – Measurement of level and temperature in storage tanks by automatic methods – Part 4 : Measurement of temperature in atmospheric tanks
BH GSO 2414:2015 Petroleum and natural gas industries – Manufacture of FRP Storage Tanks
GSO ISO 4266-1:2015 Petroleum and liquid petroleum products -- Measurement of level and temperature in storage tanks by automatic methods -- Part 1: Measurement of level in atmospheric tanks
OS GSO 2414:2014 Petroleum and natural gas industries – Manufacture of FRP Storage Tanks
GSO 2414:2014 Petroleum and natural gas industries – Manufacture of FRP Storage Tanks
GSO ISO 4266-3:2015 Petroleum and liquid petroleum products -- Measurement of level and temperature in storage tanks by automatic methods -- Part 3: Measurement of level in pressurized storage tanks (non-refrigerated)

BR-ABNT

ABNT EB-992-1979 Tank train cylindrical storage tank with round cover
ABNT NB-89-1978 Welded tanks for storage of petroleum and its derivatives
ABNT PB-621-1979 Tank train. Cylindrical storage tank with round cover. 60 m3 narrow gauge railway

RU-GOST R

GOST 31385-2016 Vertical cylindrical steel tanks for oil and oil-products. General specifications

TH-TISI

TIS 945-1990 Standard for liquefied petroleum gas storage tanks

AR-IRAM

IRAM 6004-1954 Dimensions of canned edible oil products

American Petroleum Institute (API)

API RP 65-3-2021 Linings of Aboveground Petroleum Storage Tank Bottoms (FOURTH EDITION)
API RP 652-2020 Linings of Aboveground Petroleum Storage Tank Bottoms (FOURTH EDITION)
API RP 65-1-2018 Linings of Aboveground Petroleum Storage Tank Bottoms (FOURTH EDITION)
API RP 2021-2001(2020) Management of Atmospheric Storage Tank Fires
API RP 1604-2021 Closure of Underground Petroleum Storage Tanks (FOURTH EDITION)

Danish Standards Foundation

DS/EN 13341+A1/ZA:2011 Static thermoplastic tanks for above ground storage of domestic heating oils, kerosene and diesel fuels - Blow moulded and rotationally moulded polyethylene tanks and rotationally moulded tanks made of anionically polymerized polyamide 6 - Requirements an
DS/EN 13341+A1:2011 Static thermoplastic tanks for above ground storage of domestic heating oils, kerosene and diesel fuels - Blow moulded and rotationally moulded polyethylene tanks and rotationally moulded tanks made of anionically polymerized polyamide 6 - Requirements an

Lithuanian Standards Office

LST EN 13341-2005+A1-2011 Static thermoplastic tanks for above ground storage of domestic heating oils, kerosene and diesel fuels - Blow moulded and rotationally moulded polyethylene tanks and rotationally moulded tanks made of anionically polymerized polyamide 6 - Requirements an

KR-KS

KS B 6225-2023 Structure of welded steel tanks for oil storage

AENOR

UNE-EN 13341:2005+A1:2011 Static thermoplastic tanks for above ground storage of domestic heating oils, kerosene and diesel fuels - Blow moulded and rotationally moulded polyethylene tanks and rotationally moulded tanks made of anionically polymerized polyamide 6 - Requirements an
UNE 49312:1982 HERMETICALLY SEALED METAL CONTAINERS FOR FOOD AND DRINKS. CANS FOR EDIBLE OIL

VDI - Verein Deutscher Ingenieure

VDI 3479-2009 Emission control - Marketing installation tank farms

German Institute for Standardization

DIN EN 13341:2011-04 Static thermoplastic tanks for above ground storage of domestic heating oils, kerosene and diesel fuels - Blow moulded and rotationally moulded polyethylene tanks and rotationally moulded tanks made of anionically polymerized polyamide 6 - Requirements...
DIN EN 13799:2003 Contents gauges for LPG tanks; German version EN 13799:2002
DIN 26012:1990 Tank wagons, filling and emptying devices for mineral oil tank wagons
DIN 28462:1987-11 Flanges for tank trucks; threaded flanges for couplings for tank trucks
DIN 86735:2013-06 Oil-water separators - Tank system for bilge water on seagoing vessels

BELST

STB 787-2003 Canned goods. Oiled mushrooms. Specifications

European Committee for Standardization (CEN)

prEN 976-2-1992 Underground tanks of glass-reinforced plastics (GRP); horizontal cylindrical tanks for the non-pressure storage of liquid petroleum base fuels; part 2: transport, handling, storage and installation
prEN 976-1-1992 Underground tanks of glass-reinforced plastics (GRP); horizontal cylindrical tanks for the non-pressure storage of liquid petroleum base fuels; part 1: requirements and test methods

YU-JUS

JUS L.C5.050-1987 Measuring tape m'th accessories for level measurement fn transport and storage tanks for petroleum and petroleum products
JUS L.C5.051-1987 Measuring ban for level measurement in transport and storage tanks for petroleum and petroleum products
JUS B.H8.005-1988 Level measurementin storage and transport tanks forpetroleum and petroteum products
JUS B.H8.002-1989 Calculation of guantites of petroleum and pttroleum products in tanks, unpressurized or under lov pressure, for storage and transpo

CU-NC

NC 33-96-1988 Oil Industry. Storing Tanks.Hand Cleaning Procedure

Standard Association of Australia （SAA）

AS 4976:2008 The removal and disposal of underground petroleum storage tanks

International Truck and Engine Corporation (ITEC)

INTERN CEMS GT-3F-2009 Storage Stability Of Paint In Pressurized Cans

DIN

DIN EN 13341:2005 Thermoplastic static tanks for above ground storage of domestic heating oils, kerosene and diesel fuels - Blow moulded polyethylene, rotationally moulded polyethylene and polyamide 6 by anionic polymerization tanks - Requirements and test methods

PL-PKN

PN A86932-1992 Edible vegetable fats. Packing, storage and transport

International Organization for Standardization (ISO)

ISO 3004-4:1980 Hermetically sealed metal containers for food and drinks — Part 4: Cans for edible oil
ISO 4512:2000 Petroleum and liquid petroleum products - Equipment for measurement of liquid levels in storage tanks - Manual methods
ISO 4266-4:2023 Petroleum and liquid petroleum products — Measurement of level and temperature in storage tanks by automatic methods — Part 4: Measurement of temperature in atmospheric tanks
ISO 4266-1:2023 Petroleum and liquid petroleum products — Measurement of level and temperature in storage tanks by automatic methods — Part 1: Measurement of level in atmospheric tanks
ISO 4266-3:2002 Petroleum and liquid petroleum products - Measurement of level and temperature in storage tanks by automatic methods - Part 3: Measurement of level in pressurized storage tanks (non-refrigerated)
ISO 4266-6:2002 Petroleum and liquid petroleum products - Measurement of level and temperature in storage tanks by automatic methods - Part 6: Measurement of temperature in pressurized storage tanks (non-refrigerated)

HU-MSZT

MSZ 17615-1984 Food (categorization) storage tanks

Underwriters Laboratories (UL)

UL 732 BULLETIN-2012 UL Standard for Safety Oil-Fired Storage Tank Water Heaters
UL 732 BULLETIN-2008 UL Standard for Safety Oil-Fired Storage Tank Water Heaters
UL 732 BULLETIN-2011 UL Standard for Safety Oil-Fired Storage Tank Water Heaters
UL 732 BULLETIN-2005 UL Standard for Safety Oil-Fired Storage Tank Water Heaters

CZ-CSN

CSN 38 9220-1974 Foam fire-fighting equipment for the aboveground storage tanks. Technical regulations

PT-IPQ

NP 4161-1991 Fixed tanks for storage of liquified petroleira gas Manufacture technical requirements

International Federation of Trucks and Engines

NAVISTAR CEMS GT-3F-2015 VOID - Storage Stability Of Paint In Pressurized Cans

Engineering Equipment and Materials Users Association （EEMUA)

EEMUA PUB NO 213-2012 Emission reduction from oil storage tanks and loading operations (Edition 1)