Regulations on the number of measurements

Regulations on the number of measurements, Total:322 items.

The international standard classification for "Regulations on the number of measurements" includes: Coals , Testing of metals , Astronomy. Geodesy. Geography , Ferrous metals in general , Textile fabrics , Ambient atmospheres , Fissile materials , audio, video and audiovisual engineering , Ferroalloys , Pulps , Properties of surfaces , Test conditions and procedures in general .

The Chinese standard classification for "Regulations on the number of measurements" includes: Semimetal and semiconductor material analysis method , Photogrammetry and Remote Sensing , Steel and iron alloy analysis method , Basic standards and general methods , Mapping in general , Analysis methods for toxic substances in atmosphere , Hygiene, safety and labor protection , Program transmission , Papermaking in general , Basic standards and general methods , Rare metals and their alloys analysis method , Optical Measurement , Time and Frequency Measurement , General organic chemicals , Welding and cutting , Electric transmission and transformation equipment in general .

Professional Standard - Agriculture

825兽药典二部-2015 Appendix Table of Contents 2000 Traditional Chinese Medicine Detection Method 2202 Tannin Content Determination Method
801兽药典一部-2015 Appendix Contents 0600 Determination of Physical Constants 0621 Determination of Optical Polarimetry
827兽药典一部-2015 Appendix Contents 0800 Limit Inspection Method 0831 Drying Weight Loss Determination Method
144兽药典三部-2015 Appendix Contents Determination of Chemical Residues 3201 Determination of Phenol (Carbolic Acid) Residues
805兽药典一部-2015 Appendix Contents 0600 Determination of Physical Constants 0633 Determination of Viscosity
807兽药典一部-2015 Appendix Contents 0600 Determination of Physical Constants 0681 Determination of Conductivity of Pharmaceutical Water
156兽药典三部-2015 Appendix Contents Biological Activity Potency Determination Method 3401 Half Protective Dose (PD50) Determination Method
790兽药典二部-2015 Appendix Contents 0600 Determination of Physical Constants 0621 Determination of Optical Polarimetry
802兽药典一部-2015 Appendix Contents 0600 Determination of Physical Constants 0622 Determination of Refractive Index
798兽药典一部-2015 Appendix Contents 0600 Determination of Physical Constants 0611 Determination of Distillation Range
157兽药典三部-2015 Appendix Table of Contents Biological Activity Potency Determination Method 3402 Determination of virus median lethal dose and infectious dose (LD50, ELD50, ID50, EID50, TCID50)
833兽药典二部-2015 Appendix Contents 2000 Traditional Chinese Medicine Detection Method 2341 Pesticide Residue Determination Method
799兽药典一部-2015 Appendix Contents 0600 Determination of Physical Constants 0612 Determination of Melting Point
788兽药典二部-2015 Appendix Contents 0600 Determination of Physical Constants 0611 Determination of Melting Point
146兽药典三部-2015 Appendix Contents Determination of Chemical Residues 3203 Determination of Formaldehyde Residues
812兽药典一部-2015 Appendix Contents 0700 Other Determination Methods 0711 Determination of Ethanol Quantity
831兽药典一部-2015 Appendix Contents 0800 Limit Inspection Method 0861 Residual Solvent Determination Method
791兽药典二部-2015 Appendix Contents 0600 Determination of Physical Constants 0622 Determination of Refractive Index
804兽药典一部-2015 Appendix Contents 0600 Determination of Physical Constants 0632 Determination of Osmotic Pressure Molar Concentration
789兽药典二部-2015 Appendix Contents 0600 Determination of physical constants 0612 Determination of freezing point
803兽药典二部-2015 Appendix Contents 0800 Limit Inspection Method 0832 Moisture Determination Method
803兽药典一部-2015 Appendix Contents 0600 Determination of Physical Constants 0631 Determination of pH Value
832兽药典二部-2015 Appendix Contents 2000 Traditional Chinese Medicine Testing Method 2331 Sulfur Dioxide Residual Determination Method
806兽药典一部-2015 Appendix Contents 0600 Determination of Physical Constants 0661 Thermal Analysis
145兽药典三部-2015 Appendix Contents Chemical Residue Determination Method 3202 Mercury Preservative Residue Determination Method
787兽药典二部-2015 Appendix Contents 0600 Determination of Physical Constants 0601 Determination of Relative Density
792兽药典二部-2015 Appendix Contents 0600 Determination of Physical Constants 0631 Determination of pH Value
800兽药典一部-2015 Appendix Contents 0600 Determination of physical constants 0613 Determination of freezing point
802兽药典二部-2015 Appendix Contents 0800 Limit Inspection Method 0831 Drying Weight Loss Determination Method
796兽药典二部-2015 Appendix Contents 0700 Other Determination Methods 0711 Determination of Ethanol Quantity
160兽药典三部-2015 Appendix Contents Biological Activity Potency Determination Method 3405 Viable Bacteria Counting Method
797兽药典一部-2015 Appendix Contents 0600 Determination of Physical Constants 0601 Determination of Relative Density
832兽药典一部-2015 Appendix Contents 0800 Limit Inspection Method 0871 2-Ethylhexanoic Acid Determination Method
828兽药典一部-2015 Appendix Contents 0800 Limit Inspection Method 0832 Moisture Determination Method
826兽药典二部-2015 Appendix Table of Contents 2000 Traditional Chinese Medicine Testing Method 2203 Eucalyptol Content Determination Method

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 40503-2021 Measuring methods of secondary coal slime content in coal preparation plant
GB/T 41153-2021 Determination of boron,aluminum and nitrogen impurity content in silicon carbide single crystal―Secondary ion mass spectrometry
GB/T 39144-2020 Test method for magnesium content in gallium nitride materials—Secondary ion mass spectrometry
GB/T 40766-2021 Digital space photogrammetry—Specifications for control survey

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 22563-2008(英文版) All grades of fluorspar—Determination of moisture content of a lot
GB/T 18316-2001 Specificatlons for inspection,acceptance and quality assessment of digital surveying and mapping products
GB/T 3654.6-2008 Ferroniobium - Determination of sulfur content - Combustion-iodate titrimetric method，methylene blue photometric method and infrared absorption method
GB/T 223.67-2008 Iron, Steel and Alloy - Determination of Sulfur Content - Methylene Blue Spectrophotometric Method
GB/T 44027.1-2024 Determination method of carbon material—Part 1: Determination of first discharge specific capacity, first columbic efficiency, discharge capacity retention rate at different rates
GB 15146.7-1994 Nuclear criticality safety for fissile materials outside reactors－Safety controls in conducting subcritical neutron multiplication measurements in situ
GB/T 42274-2022 Determination of the content and distribution of trace elements (magnesium, gallium) in aluminum nitride materials—Secondary ion mass spectrometry
GB/T 14679-1993 Air quality. Determination of Ammonia. Sodium salicylate-sodium hypochlorite spectrophotometric method
GB/T 42263-2022 Determination of nitrogen content in silicon single crystal—Secondary ion mass spectrometry method
GB/T 17439-1998 Specification for transmission of component-coded digital television signals for contribution-quality applications at the third hierarchical level
GB/T 14645-2014 Textiles―Burning behaviour―45°test determination of damaged area and ignition times
GB/T 42945-2023 Pulps―Determination of mass fraction of fines
GB/T 7234-2004 Geometrical Product Specifications(GPS)- Measurement of roundness - Terms,definitions and parameters of roundness

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence

GJB/J 5412-2005 Verification regulation for wide range digital RLC meter

Military Standard of the People's Republic of China-General Armament Department

GJB 8817-2015 Calibration procedures for wide range digital RLC measuring instruments
GJB 8677-2015 Calibration procedures for infrared optical transfer function measuring devices

Professional Standard - Non-ferrous Metal

YS/T 230.5-1994 High pure indium--Determination of sulphur content
YS/T 226.8-1994 Determination of boron content in selenium (methylene blue absorptiometry)

Group Standards of the People's Republic of China

T/HNNMIA 8-2023 Chemical analysis methods for secondary aluminium ash - Determination of total fluorine content - Ion chromatography
T/CAQI 289-2022 Determination of chlorate content in sodium hypochlorite by potassium dichromate titration method

Qinghai Provincial Standard of the People's Republic of China

DB63/T 2106-2023 Regulations for Calibration of Discharge Coefficient of Flow Measurement Radar Wave Flow Measurement System

National Metrological Verification Regulations of the People's Republic of China

JJG 754-1991 Optical Transfer Function Measuring Equipment
JJG(电子) 01003-1989 Assessment specification for AD5121 digital group time delay measurement meters
JJG 238-1995 Verification Regulation of Digital Time Interval Measuring Instrument
JJG(机械) 9-1990 Verification rules for comprehensive parameter measuring instrument of washing machine
JJG(铁道) 167-1997 Verification rules for digital rail straightness measuring ruler
JJG(交通) 081-2007 Static Friction Coefficient Measurer of Communication Conduct

Professional Standard - Military and Civilian Products

WJ 2437-1997 TCY low-light objective lens T-number measuring instrument verification regulations

Professional Standard - Surveying and Mapping

CH/T 1018-2009 Requirement for quality supervision sampling inspection of surveying and mapping products and data certificating

Professional Standard - Aviation

HB/Z 5090.2-2001 Analysis method for electroless nickel plating solution Determination of sodium hypophosphite content through potentiometric titration

Professional Standard - Petrochemical Industry

SH/T 1551-1993 Determination for bromine index in aromatic hydrocarbon - Coulometric titration method

Yunnan Provincial Standard of the People's Republic of China

DB53/T 619-2014 Determination of Silicon Tetrachloride and Its Subcomponents by Gas Chromatography

未注明发布机构

DIN EN 462-2:1994 Image quality test body (step/hole type) — Determination of the image quality number
DIN 32876-2:1988 Verification of geometrical parameters - Electrical linear measurement - Part 2: Digital reception of the measured quantity; concepts, requirements, testing

Hebei Provincial Standard of the People's Republic of China

DB13/T 5720-2023 Specifications for determination of inspection content and measurement parameters of lightning protection devices for buildings

Professional Standard - Machinery

JB/T 7520.5-1994 Chemical Analysis Method for Phosphorus Copper Brazing Filler Metal - Determination of Tin Content with Hypophosphite Reducing Volumetric Method

Professional Standard - Energy

NB/T 42023-2013 Treatment of Uncertainty of the Test Data

VDI - Verein Deutscher Ingenieure

VDI 4300 Blatt 7-1999 Indoor air pollution measurement - Measurement of the indoor air change rate
VDI/VDE 2617 Blatt 2.1-1986 Accuracy of coordinate measuring machines; characteristic parameters and their checking; measurement task specific measurement uncertainty; length measurement uncertainty
VDI/VDE 2617 Blatt 7-2001 Accuracy of coordinate measuring machines - Parameters and their checking - Estimation of measurement uncertainty of coordinate measuring machines by means of simulation
VDI 3867 Blatt 2-2006 Measurement of particulate matter in ambient air - Methods for characterizing test aerosols - Determination of the particle number concentration and particle size distribution - Condensation Particle Counter (CPC)

SCC

VDI 4300 BLATT 7-2001 Measuring indoor air pollution — Determining the air change rate in indoor spaces
BS ISO 3087:1998 Iron ores. Determination of the moisture content of a lot
BS ISO 230-10:2011+A1:2014 Test code for machine tools-Determination of the measuring performance of probing systems of numerically controlled machine tools
BS 2782-2 METHOD 205 TO 207:1957 Methods of testing plastics. Electrical properties Method 205, 206 and 207 power factor and permittivity at 50 cycles per second, power factor and permittivity at 800 to 1600 cycles per second, power factor and permittivity at 10 kilocycles to 100 mega.
CAN/CGSB 4.2 No.72.1-M91/ISO 6741-1:1989(R2012) Textile testing methods - Textiles - Fibers and threads - Determination of the commercial mass of a batch - Part 1: Determination of the mass and calculation methods
DANSK DS/EN ISO 287:2017 Paper and board – Determination of moisture content of a lot – Oven-drying method (ISO 287:2017)
DANSK DS/ISO 7196:1995 Acoustics - Frequency-weighting characteristics for infrasound measurements
NS-EN ISO 287:2009 Paper and board — Determination of moisture content of a lot — Oven-drying method (ISO 287:2009)
NS-EN ISO 287:2017 Paper and board — Determination of moisture content of a lot — Oven-drying method (ISO 287:2017)
VDI/VDE 2617 BLATT 11-2011 Accuracy of coordinate measuring machines — Parameters and their testing — Determination of the uncertainty of measurements on coordinate measuring machines by measurement uncertainty balances
AS 1555:1973 Method for the determination of wool content and mean fibre diameter ofraw wool in presale lots
BS 2846-1:1975 Guide to statistical interpretation of data.-Routine analysis of quantitative data
DANSK DS/EN ISO 801-1:1996 Pulps - Determination of saleable mass in lots - Part 1: Pulp baled in sheet form
DANSK DS/ISO 230-10:2016 Test code for machine tools – Part 10: Determination of the measuring performance of probing systems of numerically controlled machine tools
05/30134787 DC ISO 1088. Hydrometry. Velocity-area methods. Collection and processing of data for determination of uncertainties in flow measurement
AASHTO PP 97-2019(2023) Standard Practice for Determination of Constant Mass
NS-ISO 15705:2002 Water quality - Determination of the chemical oxygen demand index (ST-COD) - Small-scale sealed-tube method
DANSK DS/ISO 15705:2006 Water quality - Determination of the chemical oxygen demand index (ST-COD) - Small-scale sealed-tube method
VDI 3867 BLATT 2-2008 Measuring particles in the outside air — Characterization of test aerosols — Determination of particle number concentration and number size distribution — Condensation particle counter (CPC)
CAN/CGSB 39.23-1994 Rules to measure

RO-ASRO

STAS 11071/18-1983 BLOCK DIAGRAM OF HIERARCHY OF MEASURING INSTRUMENTS FOR INDUCTANCE
STAS 11071/7-1978 Legal metrologyBLOCK DIAGRAMS OF HIERARCHY OF MEASURING INSTRUMENTS FOR PRESSURE
STAS 11071/9-1978 Legal metrology BLOCK DIAGRAM OF HIERARCHY OF MEASURING INSTRUMENTS FOR VISCOSITY OF NEWTONIAN LIQUIDS
STAS 11071/20-1983 Legal metrology BLOCK DIAGRAM OF= HIERARCHY OF MEASURING INSTRUMENTS FOR EXPOSURE AND DEBIT OF EXPOSURE
STAS 11071/1-1988 Block diagrams of hierarchy BLOCK DIAGRAM OF HIERARCHY OF MEASURING INSTRUMENTS FOB LENGTH
STAS 11071/4-1989 Block diagrams of hierarchy BLOCK DIAGRAM OF HIERARCHY OF MEASURING INSTRUMENTS FOR TIME
STAS 11071/15-1985 Block diagrams kf hierarchy BLOCK DIAGREM OF HIERARCHY KF MEASURLNG LXSTRUMENTSFOR HARDNESS
STAS 11071/14-1988 Block diagrams of hierarchy NBLOCK DIAGRAM OF HIERARCHY OF MEASURING INSTRUMENTSFOR TEMPERATURE
STAS 11071/6-1986 Block diagrams of hierarchy BLOCK DIAGRAM OF HIERARCHY OF MEASURING INSTRUMENTS FOR FORCE IN STATIC REGIME
STAS 11071/8-1986 Block diagrams of hierarchy BLOCK DIAGRAM OF HIERARCHY OF MEASURING INSTRUMENTS FOR TORQUE IN STATIC REGIME
STAS 11071/19-1983 BLOCK DIAGRAM OF HIERARCHY OF MEASURING INSTRUMENTS FOR ACTIVITY AND MASS ACTIVITY
STAS 13084-1992 Tobacco. Determination of surface unity mass of foilar limb
STAS 1343/3-1986 Water supplies DETERMINATION OF SUPPLY WATER QUANTITIES FOR LIVE STOCK UNITS

GSO

BH GSO ISO 4470:2016 Sawn timber -- Determination of the average moisture content of a lot
GSO ISO 4470:2015 Sawn timber -- Determination of the average moisture content of a lot
OS GSO ISO 4470:2015 Sawn timber -- Determination of the average moisture content of a lot
GSO ISO 801-1:2015 Pulps -- Determination of saleable mass in lots -- Part 1: Pulp baled in sheet form
GSO OIML G1-106:2016 Evaluation of measurement data – The role of measurement uncertainty in conformity assessment
OS GSO ISO 10376:2013 Pulps - Determination of mass fraction of fines
OS GSO OIML G1-102:2016 Evaluation of measurement data – Supplement 2 to the “Guide to the expression of uncertainty in measurement” – Extension to any number of output quantities
GSO OIML D17:2011 Hierarchy scheme for instruments measuring the viscosity of liquids
GSO ISO/TR 25417:2013 Acoustics -- Definitions of basic quantities and terms
OS GSO ISO 10397:2015 Stationary source emissions -- Determination of asbestos plant emissions -- Method by fibre count measurement
BH GSO OIML G1-102:2017 Evaluation of measurement data – Supplement 2 to the “Guide to the expression of uncertainty in measurement” – Extension to any number of output quantities
BH GSO ISO 13543:2017 Copper, lead and zinc sulfide concentrates -- Determination of mass of contained metal in a lot
OS GSO ISO 13543:2015 Copper, lead and zinc sulfide concentrates -- Determination of mass of contained metal in a lot
OS GSO OIML D17:2011 Hierarchy scheme for instruments measuring the viscosity of liquids
BH GSO ISO 7196:2016 Acoustics -- Frequency-weighting characteristic for infrasound measurements
BH GSO OIML D17:2012 Hierarchy scheme for instruments measuring the viscosity of liquids
GSO ISO 7196:2015 Acoustics -- Frequency-weighting characteristic for infrasound measurements
GSO OIML G1-102:2016 Evaluation of measurement data – Supplement 2 to the “Guide to the expression of uncertainty in measurement” – Extension to any number of output quantities
BH GSO ISO 801-1:2016 Pulps -- Determination of saleable mass in lots -- Part 1: Pulp baled in sheet form
GSO ISO 230-10:2016 Test code for machine tools -- Part 10: Determination of the measuring performance of probing systems of numerically controlled machine tools
OS GSO ISO 801-1:2015 Pulps -- Determination of saleable mass in lots -- Part 1: Pulp baled in sheet form
GSO ISO 17560:2013 Surface chemical analysis -- Secondary-ion mass spectrometry -- Method for depth profiling of boron in silicon
OS GSO ISO 230-10:2016 Test code for machine tools -- Part 10: Determination of the measuring performance of probing systems of numerically controlled machine tools
GSO ISO 12406:2013 Surface chemical analysis -- Secondary-ion mass spectrometry -- Method for depth profiling of arsenic in silicon
GSO ISO 14096-1:2013 Non-destructive testing -- Qualification of radiographic film digitisation systems -- Part 1: Definitions, quantitative measurements of image quality parameters, standard reference film and qualitative control
OS GSO ISO 15705:2013 Water quality – Determination of the chemical oxygen demand index (ST-COD) – Small-scale sealed-tube method

British Standards Institution (BSI)

BS ISO 3087:2020 Iron ores. Determination of the moisture content of a lot
19/30357526 DC BS ISO 3087. Iron ores. Determination of the moisture content of a lot
BS EN ISO 11746:2012 Rice. Determination of biometric characteristics of kernels
BS ISO 230-10:2016 Test code for machine tools. Determination of the measuring performance of probing systems of numerically controlled machine tools
BS ISO 230-10:2011 Test code for machine tools. Determination of the measuring performance of probing systems of numerically controlled machine tools
BS EN ISO 5398-2:2009 Leather. Chemical determination of chromic oxide content. Quantification by colorimetric determination
BS ISO 10376:2011 Pulps. Determination of mass fraction of fines
BS EN IEC 60675-2:2021 Household electric direct-acting room heaters. Methods for measuring performance. Additional provisions for the measurement of the radiant factor
BS ISO/IEC 17629:2014 Information technology. Office equipment. Method for measuring first print out time for digital printing devices
BS 6674:1985 Specification for disposable micropipettes
DD 8431-2005 Electrical static meters for secondary metering and sub-metering-Specification
BS ISO 3951-6:2023 Sampling procedures for inspection by variables - Specification for single sampling plans for isolated lot inspection indexed by limiting quality (LQ)
BS DD 8431:2005 Electrical static meters for secondary metering and sub-metering - Specification
BS ISO 15705:2002 Water quality. Determination of the chemical oxygen demand index (ST-COD). Small-scale sealed-tube method
BS ISO 8559-1:2017 Size designation of clothes. Anthropometric definitions for body measurement

German Institute for Standardization

DIN 19011-1:2000 Photoflash sources - Determination of guide numbers and output data
DIN EN 61262-5:1995 Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers - Part 5: Determination of the detective quantum efficiency (IEC 61262-5:1994); German version EN 61262-5:1994
DIN EN ISO 287:2018-03 Paper and board - Determination of moisture content of a lot - Oven-drying method (ISO 287:2017); German version EN ISO 287:2017
DIN 45643-1:1984 Measurement and assessment of aircraft noise; quantities and parameters
DIN 43751-1:1987-05 Measurement and control; digital measuring instruments; general specifications relating to definitions, tests and data sheet details
DIN 43751-3:1987-05 Measurement and control; digital measuring instruments; instruments for measuring digital quantities; definitions, tests and data sheet details
DIN EN ISO 287:2018 Paper and board - Determination of moisture content of a lot - Oven-drying method (ISO 287:2017)
DIN 43751-3:1987 Measurement and control; digital measuring instruments; instruments for measuring digital quantities; definitions, tests and data sheet details
DIN 43751-1:1987 Measurement and control; digital measuring instruments; general specifications relating to definitions, tests and data sheet details
DIN 43751-2:1987-05 Measurement and control; digital measuring instruments; instruments for measuring analogue quantities; definitions, tests and data sheet details
DIN EN 14803:2006 Identification and/or determination of the quantity of waste; German version EN 14803:2006
DIN EN ISO 14956:2003 Air quality - Evaluation of the suitability of a measurement procedure by comparison with a required measurement uncertainty (ISO 14956:2002); German version EN ISO 14956:2002
DIN 43751-2:1987 Measurement and control; digital measuring instruments; instruments for measuring analogue quantities; definitions, tests and data sheet details
DIN 43751-4:1990 Measurement and control; digital measuring instruments; instruments for measuring time reference quantities; definitions, tests and data sheet details
DIN 51650:2006-07 Testing of mineral oils and related products - Determination of quantity
DIN 2239:1995 Verification of geometrical parameters - Gauges in dimensional metrology - Requirements and testing
DIN 43751-4:1990-06 Measurement and control; digital measuring instruments; instruments for measuring time reference quantities; definitions, tests and data sheet details / Note: Applies in conjunction with DIN 43751-1 (1987-05).
DIN 33962:1997 Measurement of gaseous emissions - Automatic measurement systems for single measurements of nitrogen monooxide and nitrogen dioxide
DIN EN 17817:2022 Fertilizing products - Determination of the quantity (indicated by mass or volume); German and English version prEN 17817:2022
DIN 32876-2:1999 Verification of geometrical parameters - Electrical linear measurement - Part 2: Digital reception of the measured quantity; concepts, requirements, testing
DIN ISO 15705:2003-01 Water quality - Determination of the chemical oxygen demand index (ST-COD) - Small-scale sealed tube method (ISO 15705:2002)

American Society for Testing and Materials (ASTM)

ASTM E1504-92(2001) Standard Practice for Reporting Mass Spectral Data in Secondary Ion Mass Spectrometry (SIMS)
ASTM E1504-92(1996) Standard Practice for Reporting Mass Spectral Data in Secondary Ion Mass Spectrometry (SIMS)
ASTM E1489-08(2023) Standard Practice for Computing Ride Number of Roads from Longitudinal Profile Measurements Made by an Inertial Profile Measuring Device
ASTM E1489-08(2019) Standard Practice for Computing Ride Number of Roads from Longitudinal Profile Measurements Made by an Inertial Profile Measuring Device
ASTM E1457-07e2 Standard Test Method for Measurement of Creep Crack Growth Times in Metals
ASTM D7178-22 Standard Practice for Determining the Number of Constrictions “ m ” of Non-Woven Geotextiles
ASTM E1345-24 Standard Practice for Reducing the Effect of Variability of Color Measurement by Use of Multiple Measurements
ASTM E1345-98(2003) Standard Practice for Reducing the Effect of Variability of Color Measurement by Use of Multiple Measurements
ASTM E1345-98 Standard Practice for Reducing the Effect of Variability of Color Measurement by Use of Multiple Measurements
ASTM E1245-03 Standard Practice for Determining the Inclusion or Second-Phase Constituent Content of Metals by Automatic Image Analysis
ASTM E672-87(2011) Standard Specification for Disposable Glass Micropipets
ASTM E1345-98(2008)e1 Standard Practice for Reducing the Effect of Variability of Color Measurement by Use of Multiple Measurements
ASTM E1345-98(2008) Standard Practice for Reducing the Effect of Variability of Color Measurement by Use of Multiple Measurements
ASTM E1345-98(2019) Standard Practice for Reducing the Effect of Variability of Color Measurement by Use of Multiple Measurements
ASTM D3823-07(2012) Standard Practice for Determining Ticket Numbers for Sewing Threads
ASTM E787-81(2024) Standard Specification for Disposable Glass Micro Blood Collection Pipets

SE-SIS

SIS SMS 2981 E-1973 Bilar. Bromsar. M?tning av funktionstider i tryckluftsbromssystem
SIS 02 12 53-1973 Setting out or measuring secondary points on plane

HU-MSZT

MSZ KGST 2018-1979 Measurement of defective rolling wood
MSZ KGST 2045-1979 General provisions on the accuracy of measurement parameters in the construction industry
MSZ KGST 2214-1980 General provisions for primary testing of chromium ores and chromium-containing fireproofing materials
MNOSZ 14253-1953 Visual inspection regulations for quality inspection of shoes

UY-UNIT

UNIT 366-1974 Provisions on measurement standard coefficients in building adjustment coefficients

RU-GOST R

GOST 25620-1983 Secondary radar systems for air traffic control. The measuring methods of main parameters
GOST 22988.0-1978 Gas caunters. Methods of characteristic measurement. General principles
GOST 34123.1-2017 Confectionery. Method for determination of mass fraction of fruit and vegetable raw materials. Part 1. Determination of the mass fraction of organic acids
GOST 13938.11-2014 Copper. Method for determination of arsenic mass fraction
GOST 23453-1990 Milk. Methods for determination of somatic cells quantity
GOST 25935-1983 Dosimetric instruments. Methods of measuring main parameters
GOST 30142-1994 Coal-tar oils. Determination of phenol mass fraction
GOST ISO 5626-1997 Paper. Determination of folding endurance (Shopper, Lomarge, Kellers-Molena, MIT methods)
GOST 17038.0-1979 Ionizing radiation scintillation detectors. Commonrules for methods of scintillation parameters measurements
GOST 27839-1988 Wheat flour. Methods for determination of gluten quantity and quality
GOST 27839-2013 Wheat flour. Methods of determination quantity and quality of gluten
GOST 27964-1988 Measurement of surface roughness parameters. Terms and definitions
GOST R 54729-2011 Food common salt. Measurement (determination) of moisture mass fraction by thermo-gravimetric method
GOST R 54755-2011 Food products. Methods for detection and quantity determination of Pseudomonas aeruginosa bacteria
GOST R 54053-2010 Sonfectionery. Methods for determination of fat weight fraction
GOST R 54550-2011 Synthetic rubbers. Determination of the mass fraction of extractables

CZ-CSN

CSN ISO 8875:1992 Fluorspar - Determination of moisture content of a lot
CSN ISO 3087:1994 Iron ores. Determination of moisture content of a consignment
CSN 70 0553-1981 Determination of mass and volume of glass containers

GM Global

GMW 16666-2011 Coefficient of Friction Measurement for Elastomers Issue 1; English

Indonesia Standards

SNI 19-6738-2002 Calculation methods for dependable flow of river water by frequency curve analysis

PL-PKN

PN P04727-1974 Ropes Determination ot the number of tolded yarns
PN P04670-1986 Filament yarn Determination of the number of filaments
PN-EN 4861-2021-05 E Aerospace series -- Metrological assessment procedure for kinematic fields measured by digital image correlation

VN-TCVN

TCVN 5239-1990 Sewing thread.Method for determination of breaking times on industrial sewing machines
TCVN 5789-1994 Textiles material.Yarn.Method for determination of conditional masses of lots

International Telecommunication Union (ITU)

ITU-T O.153-1992 Basic Parameters for the Measurement of Error Performance at Bit Rates Below the Primary Rate Study Group IV
ITU-T O.151 CORR 1-2002 Error performance measuring equipment operating at the primary rate and above Corrigendum 1 Study Group 4
ITU-T O.171-1997 Timing Jitter and Wander Measuring Equipment for Digital Systems Which are Based on the Plesiochronous Digital Heirarchy (PDH) Study Group 4; 34 pp
ITU-T O.181 FRENCH-2002 Equipment to assess error performance on STM-N interfaces
ITU-T O.181 SPANISH-2002 Equipment to assess error performance on STM-N interfaces
ITU-T O.153 SPANISH-1992 Basic Parameters for the Measurement of Error Performance at Bit Rates Below the Primary Rate
ITU-T O.173-2007 Jitter measuring equipment for digital systems which are based on the Optical Transport Network (OTN) SERIES O: SPECIFICATIONS OF MEASURING EQUIPMENT Equipment for the measurement of digital and analogue/digital parameters
ITU-R INFORME BT.804 SPANISH-1978 DEFINITIONS OF PARAMETERS FOR AUTOMATIC MEASUREMENT OF TELEVISION INSERTION TEST SIGNALS
ITU-T G.826-1993 (WITHDRAWN) Error Performance Parameters and Objectives for International, Constant Bit Rate Digital Paths at or Above the Primary Rate - Digital Networks (Study Group 13) 18 pp

European Committee for Standardization (CEN)

EN ISO 11746:2012 Rice - Determination of biometric characteristics of kernels (Incorporates Amendment A1: 2017)
EN ISO 11746:2022 Rice - Determination of biometric characteristics of kernels (ISO 11746:2020)
DD ENV 306-1990 Heat exchangers; methods of measuring the parameters necassary for establishing the performance
EN 4861:2020 Aerospace series - Metrological assessment procedure for kinematic fields measured by digital image correlation

Korean Agency for Technology and Standards (KATS)

KS B 0823-1977 METHOD FOR MEASUREMENT OF HYDROGEN EVOLVED FROM DEPOSITED METAL
KS B 0823-1977(1995) METHOD FOR MEASUREMENT OF HYDROGEN EVOLVED FROM DEPOSITED METAL
KS M ISO 10376:2022 Pulps — Determination of mass fraction of fines
KS I ISO 7196-2014(2019) Acoustics — Frequency-weighting characteristic for infrasound measurements
KS I ISO 7196-2019 Acoustics — Frequency-weighting characteristic for infrasound measurements
KS B ISO 230-10-2022 Test code for machine tools ― Part 10：Determination of the measuring performance of probing systems of numerically controlled machine tools
KS B ISO 230-10-2017(2022) Test code for machine tools ― Part 10：Determination of the measuring performance of probing systems of numerically controlled machine tools
KS I ISO 7196:2004 Acoustics-Frequency-weightingcharacteristic for infrasound measurements
KS I ISO 7196:2014 Acoustics — Frequency-weighting characteristic for infrasound measurements

Association Francaise de Normalisation

NF V03-755*NF EN ISO 11746:2012 Rice - Determination of biometric characteristics of kernels
NF Q03-003*NF EN ISO 287:2017 Paper and board - Determination of moisture content of a lot - Oven-drying method
NF T54-112:1980 Plastics. Sheets. Determination of the slippage. Measuring the friction coefficients.
NF EN ISO 801-1:1996 Pasta - Determination of the marketable mass of batches - Part 1: bales of sheet pasta
NF X21-064*NF ISO 23830:2009 Surface chemical analysis - Secondary-ion mass spectrometry - Repeatability and constancy of the relative-intensity scale in static secondary-ion mass spectrometry.
NF ISO 10376:2011 Pasta - Determination of the mass fraction of fines
NF T03-033:1981 CHEMICAL PRODUCTS. DETERMINATION OF ACUTE TOXICITY TO RABBITS. SINGLE PERCUTANEOUS ADMINISTRATION.
NF Q03-402*NF ISO 10376:2011 Pulps - Determination of mass fraction of fines
XP CEN/TS 17308:2019 Used non-reusable tires (PUNR) - Metallic wires - Determination of the content of non-metallic materials
NF T03-021:1980 Chemical products. Determination of acute toxicity to rats. Single oral administration.
NF T03-022:1980 Chemical products. Determination of acute toxicity to rats. Single administration by inhalation.
NF ISO 230-10:2022 Machine tool test code - Part 10: determination of measurement performance of numerically controlled machine tool probing systems
NF X43-505*NF ISO 13752:1998 Air quality. Assessment of uncertainty of a measurement method under field conditions using a second method as a reference.
NF E60-100-10*NF ISO 230-10:2022 Test code for machine tools - Part 10 : determination of the measuring performance of probing systems of numerically controlled machine tools
NF A10-003/A3:1970 CHEMICAL ANALYSIS OF FERROUS ALLOYS AND SILICON ALLOYS. GRAVIMETRIC DETERMINATION OF CARBON.
NF E60-100-10:2011 Test code for machine tools - Part 10 : determination of measuring performance of probing systems of numerically controlled machines tools.
NF EN 14190:2014 Secondary plasterboard products - Definitions, specifications and test methods

International Organization for Standardization (ISO)

ISO 11746:2012 Rice - Determination of biometric characteristics of kernels
ISO 3028:1974 Photography — Expendable photoflash lamps — Determination of relative spectral energy distribution for calculation of spectral distribution index
ISO 23830:2008 Surface chemical analysis - Secondary-ion mass spectrometry - Repeatability and constancy of the relative-intensity scale in static secondary-ion mass spectrometry
ISO 10376:2011 Pulps - Determination of mass fraction of fines
ISO 10370:1993 Petroleum products; determination of carbon residue; micro method
ISO 10370:2014 Petroleum products - Determination of carbon residue - Micro method
ISO 11746:2012/Amd 1:2017 Rice - Determination of biometric characteristics of kernels; Amendment 1
ISO 230-10:2011 Test code for machine tools - Part 10: Determination of the measuring performance of probing systems of numerically controlled machine tools
ISO 7196:1995 Acoustics - Frequency-weighting characteristic for infrasound measurements
ISO 230-10:2016 Test code for machine tools - Part 10: Determination of the measuring performance of probing systems of numerically controlled machine tools
ISO 230-10:2022 Test code for machine tools — Part 10: Determination of the measuring performance of probing systems of numerically controlled machine tools
ISO 5398-2:2009 Leather - Chemical determination of chromic oxide content - Part 2: Quantification by colorimetric determination
ISO/TS 19036:2006/Amd 1:2009 Microbiology of food and animal feeding stuffs - Guidelines for the estimation of measurement uncertainty for quantitative determinations - Amendment 1: Measurement uncertainty for low counts

ES-UNE

UNE-EN ISO 287:2018 Paper and board - Determination of moisture content of a lot - Oven-drying method (ISO 287:2017)
UNE-ISO 230-10:2016 Test code for machine tools -- Part 10: Determination of the measuring performance of probing systems of numerically controlled machine tools.

Danish Standards Foundation

DS/EN ISO 287:2009 Paper and board - Determination of moisture content of a lot - Oven-drying method
DS/EN ISO 801-3:1997 Pulps - Determination of saleable mass in lots - Part 3: Unitized bales
DS/ISO 7196:1995 Acoustics - Frequency-weighting characteristics for infrasound measurements
DS 10311:1959 Testing of metals. Reverse bend testing of wire. (Determination of number of bends)
DS/EN ISO 801-1:1997 Pulps - Determination of saleable mass in lots - Part 1: Pulp baled in sheet form
DS/ISO 230-10:2011 Test code for machine tools - Part 10: Determination of the measuring performance of probing systems of numerically controlled machine tools

International Electrotechnical Commission (IEC)

IEC 61262-5:1994 Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers - Part 5: Determination of the detective quantum efficiency

Japanese Industrial Standards Committee (JISC)

JIS P 8127:2010 Paper and board -- Determination of moisture content of a lot -- Oven-drying method
JIS B 2005:1995 Test procedures for flow coefficient of valves
JIS B 6190-10:2018 Test code for machine tools -- Part 10: Determination of the measuring performance of probing systems of numerically controlled machine tools

AENOR

UNE-EN ISO 287:2009 Paper and board - Determination of moisture content of a lot - Oven-drying method (ISO 287:2009)
UNE 57099:1978 PAPER AND CARDBOARD. DETERMINATION OF THE NUMBER OF MICELIOS COLONIES (NM)

Lithuanian Standards Office

LST EN ISO 287:2009 Paper and board - Determination of moisture content of a lot - Oven-drying method (ISO 287:2009)
LST 1522-2004 Wheat. Determination of wet gluten quantity and quality
LST EN 4861-2021 Aerospace series - Metrological assessment procedure for kinematic fields measured by digital image correlation

American National Standards Institute （ANSI)

ANSI/ATIS 0600107-2002 Telecommunications - Digital Hierarchy - Formats Specifications
ANSI/ASTM D5320:1996 Test Methods for Determination of 1,1,1-Trichloroethane and Methylene Chloride Content in Stabilized Trichloroethylene and Tetrachloroethylene
ANSI/SCTE 62-2012 Measurement Procedure for Noise Figure

KR-KS

KS M ISO 10376-2022 Pulps — Determination of mass fraction of fines

International Commission on Illumination (CIE)

CIE X029-2006 PROCEEDINGS of the 2nd CIE Expert Symposium on Measurement Uncertainty

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc.

ASHRAE 4656-2003 Survey of Available Data on Secondary Properties of the Ammonia-Water Solution and Sensors for Their Measurement (RP-1041)

TR-TSE

TS 335-1966 DETERMINATION OF KOH NUMBER OF LATEX
TS 572-1967 DETERMINATION OF YARN NUMBER REMOVED FROM FABRICS

ITU-T - International Telecommunication Union/ITU Telcommunication Sector

ITU-T O.171-1992 Timing Jitter Measuring Equipment for Digital Systems - Specifications for Measuring Equipment (Study Group IV; 13 pp)

ES-AENOR

UNE 53-200-1992 Plastic. Determination of the melt mass-flow rate(MFR) and the melt volume-flow rate(MVR) of thermoplastics

IN-BIS

IS 2720 Pt.18-1992 Methods of test for soils. Part 18: Determination of field moisture equivalent (First Revision)
IS 684-1962 Method for determining the number of neps in cotton
IS 5002-1969 A method of determining sample size to estimate the average quality of a batch or process

YU-JUS

JUS G.C1.063-1984 Raw styren-butadiene rubber (SBR). Determination of soap content

Standard Association of Australia （SAA）

AS ISO 13543:2022 Copper, lead, zinc and nickel sulfide concentrates — Determination of mass of contained metal in a lot
AS 3778.3.4:1990 Measurement of water flow in open channels - Velocity-area methods - Collection and processing of data for determination of errors in measurement

Consumer Electronics Association （U.S.)

CEA-762-A-2002 DTV Remodulator Specification

AT-ON

OENORM EN 4861-2021 Aerospace series - Metrological assessment procedure for kinematic fields measured by digital image correlation
ONORM M 7531-2001 Testing of flue gases of oil burning systems - Determination of the smoke soot number

CH-SNV

SN EN 4861-2021 Aerospace series - Metrological assessment procedure for kinematic fields measured by digital image correlation
VSM 13159-1968 Determination of the quality of knitwear and the number of derived characteristics

IT-UNI

UNI EN 4861-2021 Aerospace series - Metrological assessment procedure for kinematic fields measured by digital image correlation

American Society of Mechanical Engineers (ASME)

ASME B1 TECH REPT-1993 Measurement Uncertainty for 60 Deg. Screw Thread Gage Element Measurement (Inch and Metric)
ASME B1-1993 Measurement uncertainty for 60 deg. screw thread gage element measurement (inch and metric)
ASME B1/TR-1993 Measurement uncertainty for 60 deg. screw thread gage element measurement (inch and metric)

Malaysia Standards

MS 281 Pt.14-2001 Natrual rubber latex concentrate:Part 14:Determination of nitrogen content(Third revision)
MS 281 Pt.12-2001 Natrual rubber latex concentrate:Part 12:Determination ofboric acid content(Third revision)

AIAG - Automotive Industry Action Group

D-25-2007 Quality Measurement Data Specification (Version 1)

GM North America

GM B200-2011 Thread Runout and Bolt Straightness Referee Gages and Gaging Procedure (Issue 2; Do Not Use on New Programs; No Replacement)

Others: "Regulations on Tolerances for Quality Measurement of Jewelry and Precious Metal Products",Provisions on tolerances for quality measurement of jewelry and precious metal products,Measurement of smoke density of cables burned under specified conditions