GB/T 10189-2013 in English

Scope

Blank detail specification A blank detail specification is a supplementary document to a sectional specification, which includes requirements for the format, layout and minimum content of the detail specification. A detailed specification that does not comply with these requirements is considered to be a specification that does not meet the requirements of the electronic component quality assessment system. When formulating detailed specifications, the content of sub-specification 1.4 should be considered. Identification of detailed specifications and capacitors The numbers in parentheses on the first page of detailed specifications indicate that the following corresponding content should be filled in the corresponding positions: (1) The organization authorized to draft this detailed specification: IEC or national standards body. (2) The detailed specification number of the IEC or national standard, the release date and other contents required by the national standard system. (3) General specification number and version number of IEC or national standard. (4) Blank detail specification number of IEC or national standard. Identification of capacitors (5) A brief description of the type of capacitor. (6) Description of typical structure (when applicable). (7) Outline drawings of main dimensions that affect interchangeability and/or references to national or international outline documents. In addition, such a diagram can also be given in the detailed specification appendix. (8) The application or application group and/or assessment level involved. (9) Important characteristic reference data for comparison between various types of capacitors.