Sign In |Help & Support
ALL SECTORS
  • ALL SECTORS
  • GB(National Standard)
  • CB(Shipping)
  • CECS(Engineering Construction)
  • CJ(Urban Construction)
  • CY(News and Publication)
  • DB(Provincial Standard)
  • DL(Electricity & Power)
  • DZ(Geology & Mineralogy)
  • FZ(Spinning & Textile)
  • GA(Public Security)
  • HB(Aviation)
  • HG(Chemical Industry)
  • HJ(Environmental Protection)
  • JB(Machinery)
  • JC(Building Materials)
  • JG(Building & Construction)
  • JJ(Metering)
  • JT(Highway & Transportation)
  • LY(Forestry)
  • MT(Coal)
  • NB(Energy)
  • NY(Agriculture)
  • QB(Light Industry)
  • QC(Automobile & Vehicle)
  • QJ(Aerospace)
  • SH(Petrochemical)
  • SJ(Electronics)
  • SL(Water Resources)
  • SN(Commodity Inspection)
  • SY(Oil & Gas)
  • TB(Railway & Train)
  • YB(Ferrous Metallurgy)
  • YC(Tobacco)
  • YD(Telecommunication)
  • YY(Medical Device)
Database: 365,228(8 Aug 2026)
celadon porcelain ware ― part glaze introduction gb/t10813.3-2015 celadon part glaze celadon ware celadon porcelain ware flaked glaze celadon various civilian lead-acid batteries plague introduction standard revision background thiocyanate spectrophotometry scopethis section
GB/T 10813.3-2015 in English

GB/T 10813.3-2015 in English

VALID

Celadon porcelain ware―Part 3:Celadon porcelain ware with craquele glaze

  • Issued on:2015-10-09
  • Implemented on:2016-05-01
  • File Format:PDF
  • Delivery:Via email within 1~3 business days
Price(USD): $110.00
$107.00
Standard No: GB/T 10813.3-2015
Document status: VALID
Title in English: Celadon porcelain ware―Part 3:Celadon porcelain ware with craquele glaze
Title in Chinese: 青瓷器 第3部分:纹片釉青瓷器
Language: English
File Format: Electronic (PDF)
Delivery: Via email within 1~3 business days
Issued on: 2015-10-09
Implemented on: 2016-05-01
Superseding: GB 10813.3-1989 of celadon Porcelain ware series - Standard of craquele glaze
ICS Classification: 81.060.20-Ceramic products
Chinese Classification: Y24-Daily use ceramics products
Professional Classification: GB-National Standard
Related Keywords: celadon porcelain ware ― part
glaze introduction gb/t10813.3-2015 celadon part
glaze celadon ware
celadon porcelain ware
flaked glaze celadon
Related Topics: porcelain
glaze
GB/T 10813.3
GB/T 10813.3-1989
GB/T 10813.3-2015
Celadon glazed porcelain
Celadon

GB/T10813的本部分规定了纹片釉青瓷器的产品分类、技术要求、试验方法、检验规则和包装、标志、运输、贮存。
本部分适用于釉以氧化铁为着色剂,以铁骨胎、朱砂胎或白色胎为坯胎,在还原气氛下烧成的釉面呈现纹片的青瓷器。


Introduction

GB/T10813.3-2015 Celadon Part 3: In-depth interpretation of the standard for flaked glaze celadon

Analysis of the background of standard formulation and technological evolution

GB/T10813 Celadon is divided into four parts, and this part is Part 3, which mainly stipulates the product classification, technical requirements, test methods and inspection rules of flaked glaze celadon. Compared with the 1989 version of the standard, the new version of the standard has made important revisions in water absorption, lead and cadmium dissolution, product quality grade and inspection rules, reflecting the progress of industry technology and the improvement of quality requirements.

Product Classification

Category Form Specification classification (unit: mm)
Sculpture Classified by artistic effect No specific size limit
Utensils Classified by purpose Small (<140mm), medium (140-300mm), large (301-400mm), special (>400mm)
>Other categories Classification by special purpose Same as above

Technical requirements interpretation

Water absorption:The water absorption of the patterned glaze celadon ware shall not exceed 1.0% to ensure the waterproof performance of the product.

Lead and cadmium dissolution:The utensils used for holding food must comply with the provisions of GB12651 to ensure food safety.

Appearance quality:Each superior product shall not exceed 3 defects, and each qualified product shall not exceed 5 defects. For specific defect types and limits, see Table 2.

Test methods and inspection rules

The test methods include water absorption determination (GB/T3299), lead and cadmium dissolution determination (GB/T3534) and deformation and defect size determination (GB/T3301). The inspection rules adopt the counting sampling inspection procedure, which is divided into delivery inspection and type inspection. Tables 3 and 4 specify the sample size and unqualified judgment criteria for different batches in detail.

Implementation suggestions

  • Internal training of the enterprise: Organize technical personnel to learn the new standard to ensure understanding and implementation.
  • Equipment update: Adjust the production process and testing equipment according to the technical requirements of the new version of the standard.
  • Quality traceability: Establish a product quality traceability system to facilitate the rapid location and processing of problematic products.

Sample only — not a preview of GB/T 10813.3-2015
Page: 1 / 0
100%

Loading PDF document...

Error loading PDF. Please make sure the file is valid and try again.

We also recommend