GB/T 19216.21-2003 in English
VALIDTests for electric cables under fire conditions - Circuit integrity - Part 21: Procedures and requirements - Cable of rated voltage up to and including 0.6/1.0 kV
- Issued on:2003-06-24
- Implemented on:2004-02-01
- File Format:PDF
- Delivery:Via email within 1~3 business days
$78.00
| Standard No: | GB/T 19216.21-2003 |
| Document status: | VALID |
| Title in English: | Tests for electric cables under fire conditions - Circuit integrity - Part 21: Procedures and requirements - Cable of rated voltage up to and including 0.6/1.0 kV |
| Title in Chinese: | 在火焰条件下电缆或光缆的线路完整性试验 第21部分: 试验步骤和要求 额定电压0.6/1.0kV及以下电缆 |
| Language: | English |
| File Format: | Electronic (PDF) |
| Delivery: | Via email within 1~3 business days |
| Issued on: | 2003-06-24 |
| Implemented on: | 2004-02-01 |
| Superseding: |
GB/T 12666.6-1990 Test method for electric wire and cable burning test - part 6: Test Method for fire resistance characteristic of electric wire and cable
|
| ICS Classification: | 29.060.20-Cables |
| Chinese Classification: | K13-Cable and its accessory |
| Professional Classification: | GB-National Standard |
| Related Keywords: | rated voltage
electric cables fire conditions circuit integrity control cables |
| Related Topics: | experiment procedure
experiment procedure GB/T 19216.21 GB/T 19216.21-2003 gb/t19216.21 gb/t19216.21-2003 |
《GB/T 19216.21-2003在火焰条件下电缆或光缆的线路完整性试验 第21部分:试验步骤和要求 额定电压0.6/1.0 kV及以下电缆》由TC213（全国电线电缆标准化技术委员会）归口，主管部门为中国电器工业协会。
GB/T19216的本部分规定了额定电压0.6/1.0kV及以下电缆在火焰条件下燃烧而要求保持线路完整性的试验步骤和性能要求，包括推荐的供火时间。本部分规定了试样制备方法、连续性检查装置、电气试验步骤和燃烧电缆的方法，并给出了评价试验结果的要求。本部分适用于低压电力电缆和具有额定电压的控制电缆。
Scope
This part of GB/T 19216 specifies the test procedures and performance requirements for cables with a rated voltage of 0.6/1.0 kV and below to maintain circuit integrity when burning under flame conditions, including the recommended fire supply time. This part specifies the sample preparation method, the continuity check device, the electrical test procedure and the method of burning the cable, and gives the requirements for evaluating the test results. This section applies to low-voltage power cables and control cables with rated voltage.
Loading PDF document...
Error loading PDF. Please make sure the file is valid and try again.
We also recommend
-
GB/T 11017.1-2024 in English
Power cables with cross-linked polyethylene insulation and their accessories for rated voltage of 66 kV(Um=72.5 kV)and 110 kV(Um=126 kV)—Part 1: Test methods and requirements
2024-09-29 -
GB/T 18014-2008 in English
PVC insulated wire for ignition of electric detonators
2008-06-18 -
GB/T 14049-2008 in English
Aerial insulated cables for rated voltage of 10kV
2008-06-30 -
GB/T 9326.1-2008 in English
Oil-filled paper or polypropylene paper laminate insulated metal-sheathed cables and accessories for alternating voltages up to and including 500kV - Part 1: Test
2008-06-30 -
GB/T 41629.1-2022 in English
Long AC submarine cables with cross-linked polyethylene insulation and their accessories for rated voltage of 500 kV(Um=550 kV)—Part 1: Test methods and requirements
2022-07-11 -
GB/T 2952.1-2008 in English
Protective coverings for electric cables - Part 1: General
1982-03-22 -
GB/T 19216.11-2003 in English
Tests for electric cables under fire conditions - Circuit integrity - Part 11: Apparatus - Fire alone at a flame temperature of at least 750℃
2003-06-24 -
GB/T 42397-2023 in English
Calculation of thermally permissible short-circuit currents, taking into account non-adiabatic heating effects
2023-03-17
