angle rotor

angle rotor, Total:68 items.

The international standard classification for "angle rotor" includes: Motors , Piping systems , Electrical equipment of ships and of marine structures , Diagnostic, maintenance and test equipment , Clocks .

The Chinese standard classification for "angle rotor" includes: Micro machine , Marine hydraulic/pneumatic elements and accessories , Welding and cutting , Combination grippers , Pipe fittings, clamps and seals , Highway vehicle servicing installation , Horology .

---

国家市场监督管理总局、中国国家标准化管理委员会

• GB/T 37476-2019 Marine swing and rotate angle hydraulic cylinder
• GB/T 13138-2020 General specification for synchro
• GB/T 10241-2020 General specification for electrical resolver

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

• GB/T 16672-1996 Welds-Working positions-Definitions of angles of slope and rotation
• GB/T 13138-1991 Synchros general specification for synchros
• GB/T 13138-2008 Synchro General specification for
• GB/T 37476-2019(英文版) Marine swing angle hydraulic cylinder

Professional Standard-Ships

• CB 1231.4-1993 Electronic Conversion Module - Detail Specification for Digital-Selsyn Converter
• CB 1231.1-1993 Electronic Conversion Module - Detail Specification for Selsyn-Digital Converter
• CB 1231.11-1993 Electronic Conversion Module - Detail Specification for Selsyn Output Transformer

Professional Standard - Aviation

• HB 6089-1986 36/16 volt step-down system self-tuning machine signal cross-link
• HB 1468-1987 Corner Support
• HB 1236-1987 Corner back-up board
• HB 7523-1997 Quadrature Tube Joint with Swivel Nut

National Metrological Verification Regulations of the People's Republic of China

• JJG(交通) 007-2005 Steering Force-Steeting Angle Tester of Motor Car

Group Standards of the People's Republic of China

• T/GDC 114-2021 Corner linkage pull basket
• T/QGCML 2301-2023 Adjustable large-angle flat turning device

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

• GB/T 34592-2017 Steering force steering angle detector for steering wheel of automobile

Professional Standard - Textile

• FZ/T 97001-1991 Rib Machine (Triangle Rotary Type)
• FZ 97001-1991 Rib Machine (Triangle Rotary Type)

未注明发布机构

• DIN EN ISO 6947:1997 Welds – Working positions Definitions of angles of slope and rotation

Professional Standard - Light Industry

• QB/T 1040-2011 Rotor magnet-steel for analogue quartz clocks

Professional Standard - Machinery

• JB/T 7662-1995 positive displacement compressor term rotary compressor

Professional Standard - Traffic

• JT/T 634-2005 Automotive front-wheel turning angle tester

National Metrological Technical Specifications of the People's Republic of China

• JJF(汽车) 07-2008 Calibration specification for steering force angle tester

HU-MSZT

• MNOSZ 1479-1956 Cast smooth corner straight spoon
• MSZ 4934-1982 Rotate the 64-corner eye multiple times
• MNOSZ 9045-1954 box corner
• MSZ 1435-1959 Rotor parts

Society of Automotive Engineers (SAE)

• SAE J852-1963 CORNERING LAMPS
• SAE AS4636-1-1955 AS4636 Corner Washer Plate

SAE - SAE International

• SAE J852-1987 Front Cornering Lamps for Use on Motor Vehicles
• SAE J852-2017 Front Cornering Lamps for Use on Motor Vehicles

CZ-CSN

• CSN 22 5940-1953 corner clamp
• CSN 22 9652-1955 Sharp angle trowel
• CSN 22 9653-1955 Sharp-angled trowel
• CSN ON 23 3410-1964 rotating brush
• CSN 22 9654-1955 Flattened trowel

PL-PKN

• PN B94052-1960 The fi?tings. Hinges-corners
• PN BN 3783-06-1966 Steering chain. angle gearbox

Japanese Industrial Standards Committee (JISC)

• JIS Z 3011:2014 Welding positions defined by means of angles of slope and rotation
• JIS Z 3011:2004 Welding position defined by means of angles of slope and rotation
• JIS B 4122:1985 Indexable inserts without fixing hole, with 11 degrees normal clearance
• JIS D 5815:2001 Motorcycles -- Steering locks
• JIS B 4121:1985 Indexable inserts without fixing hole, with 0 degrees normal clearance

BR-ABNT

• ABNT PB-615-1979 bogie, integral bogie, brake triangle rod

SE-SIS

• SIS SMS 985-1965 Carbide tools. Indexable inserts. Triangul?r. For positive top rake angle
• SIS SMS 984-1965 Carbide tools. Indexable inserts. Triangul?r. For negative top rake angle

German Institute for Standardization

• DIN 10:2009 Squares of parallel shanks for rotating tools
• DIN 15920-1:2011-11 Entertainment technology - Practical types - Part 1: Wooden ramps, corner ramps, bevels, corner bevels
• DIN 41638:1983 Rotary wafer switches (12 31) mm, 12 positions; soldering terminals, rectangular to the driving shaft; dimensions, ratings, requirements, tests

SCC

• BS EN ISO 6947:1997 Welds. Working positions. Definitions of angles of slope and rotation
• SPC GB/T 37476-2019 Marine swing and rotate angle hydraulic cylinder (TEXT OF DOCUMENT IS IN CHINESE)
• BS DD 219-1:1995 Electronic funds transfer at point of sale (EFT- POS). Conceptual framework-Guide to roles, entities and relationships
• MIL MIL-DTL-13791/15A-2016 Rotor Assembly
• MIL MIL-DTL-13791/15-2009 Rotor Assembly
• MIL MIL-DTL-13791/11-2009 Rotor Assembly
• MIL MIL-DTL-13791/11A-2016 Rotor Assembly

ZA-SANS

• SANS 6947:1990 Welds - Working positions - Definitions of angles of slope and rotation

Association Francaise de Normalisation

• NF A80-010:1997 Welds. Working positions. Definitions of angles of slope and rotation.

International Organization for Standardization (ISO)

• ISO 3286:1976 Single point cutting tools; corner radii
• ISO 3286:2016 Single point cutting tools - Corner radii

DE-VDA

• VDA 262-1985 Conversion from hexagon head cap screws and hexagon nuts to ISO widths across flats

RU-GOST R

• GOST 11969-1979 Fusion welding. Basic positions and their designations

British Standards Institution (BSI)

• DD 219-1:1995 Electronic funds transfer at point of sale (EFT- POS). Conceptual framework - Guide to roles, entities and relationships

Korean Agency for Technology and Standards (KATS)

• KS B 0903-2013 Welds－Working positions－Definitions of angles of slope and rotation

Defense Logistics Agency

• DLA MIL-DTL-13791/15-2009 ROTOR ASSEMBLY
• DLA MIL-DTL-13791/11-2009 ROTOR ASSEMBLY

Others: rotor,Calibration rotor,rotor horizontal rotor,standard rotor,standard rotor,rotor english,High pressure rotor,solid rotor,Rotor type,rotor seal,Rotor Specifications,Rotor vulcanization,rotor seal,rotor shaft,rotor disk,Stator rotor,angle rotor,horizontal rotor,rubber rotor