Screw cap size

Screw cap size, Total:250 items.

The international standard classification for "Screw cap size" includes: Screw threads , Metric screw threads , Special screw threads , Inch screw threads , Linear and angular measurements , Metrology and measurement in general , Measuring instruments , Machine tools in general , Lathes , Dividing and tool-workpiece holding devices , Components for aerospace construction .

The Chinese standard classification for "Screw cap size" includes: Basic standards and general methods , Measuring tool and instrument , Machine tool assistive device and accessory , Lathe , Horology , Measuring devices , Pipe fittings, clamps and seals .

Taiwan Provincial Standard of the People's Republic of China

CNS 4224-1978 Metric Trapezoidal Screw THread (Limits for Externational Screw Threads from 105 mm to 300 mm )
CNS 4222-1978 Metric Trapezoidal Screw Thread (Limits for Internal Screw Threads from 105 mm to 300 mm)
CNS 508-1978 Knuckle Thread (Profiles, Nominal Sizes)
CNS 519-1955 Limit of Whitworth Threads (Fine Fit)
CNS 514-1978 Metric Trapezoidal Screw Thread (Basic Sizes)
CNS 4552-1978 Rounded Trapezoidal Thread Nominal Sizes

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 20667-2006 Unified screw threads - Limits of sizes
GB/T 12359-2008 Metric trapezoidal screw threads - Limits of sizes
GB/T 15054.5-1994 Miniature screw threads - Limits of sizes
GB/T 13576.3-1992 Buttress threads with 3 and 30 degrees
GB/T 5796.3-1986 Metric trapezoidal screw threads; Basic dimensions
GB/T 15756-1995 Limits of size for general purpose screw threads
GB/T 8125-2004 Types and dimensions of gauges for metric trapezoidal screw threads
GB/T 8125-1987 Type and size of gauges for metric trapezoidal screw threads
GB/T 196-2003 General Purpose Metric Screw Threads-Basic Dimensions
GB/T 15756-2008 General purpose metric screw threads - Limits of sizes
GB/T 20668-2006 Unified screw threads - Basic dimensions
GB/T 12359-1990 Limits of sizes for metric trapezoidal screw threads
GB/T 15054.3-1994 Miniature screw threads - Basic dimensions
GB/T 10920-2003 Types and dimensions of gauges for general purpose screw threads

Military Standard of the People's Republic of China-General Armament Department

GJB 3.2-1982 MJ threaded bolt and nut thread dimensions and tolerances
GJB 3.3A-2003 MJ threads Part 3: Limiting dimensions of pipe fitting threads
GJB 3.3A-2015 MJ threads Part 3: Limiting dimensions of pipe fitting threads
GJB 3.4-1985 Dimensions and tolerances of threads of MJ threaded structural parts
GJB 3.3-1985 Dimensions and tolerances of MJ threaded pipe fittings threads
GJB 3.2A-2015 MJ Threads Part 2: Limiting Dimensions of Bolt and Nut Threads

Professional Standard - Machinery

JB/ZQ 4168-2006 Pipe thread - Blank dimension before cutting inner and outer thread
JB/T 3411.15-1999 Holder for taping and thread die cutting - Dimensions
JB/T 4137-1999 Threaded Main Shaft End Dimensions

Professional Standard - Light Industry

QB/T 2400-2018 Metal case backs for watches
QB/T 2400-1998 Dimensions for Wrist Watch Back with Threads

Professional Standard - Aerospace

QJ 1320-1987 Application Dimensions of Regular Screw Thread Gauge
QJ 164-1974 Thread profile dimensions and tolerances of thread gauges before plating
QJ 162-1974 Basic size of thread ring gauge before plating
QJ 160-1974 Ordinary thread gauge thread profile dimensions and tolerances
QJ 2761-1995 Application Dimensions of MJ Thread Guage

未注明发布机构

DIN 103-4:1971 ISO Metric Trapezoidal Screw Thread; Nominal Dimensions
DIN 3858:1970 Whitworth pipe threads for pipe couplings; parallel internal threads and taper external threads; thread dimensions

Professional Standard - Aviation

HB 3907-1986 Common thread gauge application size
HB 3907-1995 Application Demension of Common Thread Gauge
HB 5970-2008 Dimension of Thread End, for 24° Flareless Tube Fitting

IN-BIS

IS 10362-1982 Case back and bezel thread dimensions
IS 10363-1982 Dimensions of watch case screw back fixing device
IS 5957-1989 Threads for self-tapping screws—dimensions
IS 4694-1968 Basic dimensions of square thread
IS 4696 Pt.3-1976 Serrated Thread Dimensions Part III Basic Dimensions
IS 2540-1963 Thread center hole size
IS 4695-1968 Basic dimensions of joint threads
IS 7800-1975 Thread and end dimensions of self-tapping screws
IS 1369-1982 Dimensions of screw thread runout and undercuts
IS 2643 Pt.3-1975 Dimensions of pipe threads for fastening Part III Dimensional limitations
IS 3949-1971 Laryngoscope lamp dimensions and threads
IS 3333 Pt.3-1967 Pipe Thread Dimensions for the Petroleum Industry Part III Oil Pipe Round Threads
IS 3333 Pt.1-1967 Petroleum Industry Pipe Thread Dimensions Part Ⅰ Line Pipe Threads
IS 2186-1967 External interference fit thread dimensions
IS 8217-1976 Pipe Thread Runout and Undercut Dimensions
IS 554-1975 Dimensions of pipe threads requiring pressure-tight fittings on threads
IS 3333 Pt.2-1967 Pipe thread dimensions for petroleum industry Part Ⅱ Casing round threads
IS 4695 Pt.1-1988 Specification for joint screw threads Part 1 Thread form and nominal dimensions

VN-TCVN

TCVN 1915-1976 Blind nuts.Dimensions
TCVN 2248-1977 Metric screw threads.Basic dimensions
TCVN 4673-2008 ISO metric trapezoidal screw threads.Basic dimensions
TCVN 3777-1983 Buttress threads.Profiles and basic dimensions

SE-SIS

SIS SEN 30 08 20-1965 Edison screw threads Dimensions
SIS SS 1711-1978 UNC-threads, dimensioned for coating — Thread tolerances
SIS SS 1712-1978 UNF-threads, dimensioned for coating - Thread tolerances
SIS SMS 2-1972 ISO metric screw threads. Selected sizes for screw threads with coarse pitch
SIS SMS 681-1947 Round thread. Nominal size
SIS SMS 1708-1961 Schrader thread, external spinal thread, standard and material sizes
SIS SMS 1707-1961 American pipe thread, sealed type, internal tapered pipe thread NPTF nominal and material dimensions
SIS SMS 1706-1961 American pipe thread, sealed type, external tapered pipe thread NPTF nominal and material dimensions
SIS SMS 365-1949 Bicycle thread. Nominal size
SIS SMS 1705-1961 American pipe thread, sealed type, internal cylindrical pipe thread NPSF nominal and material dimensions
SIS SMS 2164-1967 Dimensions of head for hexagon bolls. Metric screw threads
SIS SS 3194-1988 ISO inch screw threads- Hot dip galvanizing of external screw threads (UNC threads) - Tolerances and limits of sizes
SIS SMS 2171-1973 Metric screw threads. Tolerances. Limits of sizes for commercial bolt and nut threads. Medium quality
SIS SMS 1755-1974 Hexagon nuts. General dimensions. ISO metric screw threads
SIS SS 3358-1980 ISO metric trapezoidal screw threads - Limits of sizes
SIS SMS 2171-1966 Metric screw threads. Tolerances. Limits of sizes for medium quality commercial bolt and nut threads
SIS SS 1715-1988 /SO genera/purpose metric screw threads — Selected sizes for screw threads with fine pitch
SIS SS-ISO 2904:1980 ISO metric trapezoidal screw threads — Basic dimensions

Danish Standards Foundation

DS 685:1990 Steel conduit thread. Sizes
DS/ISO 725:2009 ISO inch screw threads - Basic dimensions
DS/ISO 725:1988 ISO inch screw threads. Basic dimensions
DS 2087:1968 Female ended valves - End-to-end dimensions
DS/ISO 724/Corr. 1:2009 ISO general-purpose metric screw threads - Basic dimensions
DS/ISO 2904:2020 ISO metric trapezoidal screw threads – Basic dimensions
DS/ISO 724:1995 ISO general-purpose metric screw threads - Basic dimensions

PL-PKN

PN M02019-1988 Buttress screw threads Dimensions
PN G53033-1966 Gauges for casing threads
PN E02502-1970 Threads for s?eel conduit pipes Dimensions
PN M55336-1989 Machines tools hread machines izes
PN E85200-02-1985 Electric light sources Caps Screw caps E5 Dimensions
PN E85200-03-1985 Electric light sources Caps Screw caps E10 Dimensions
PN E85200-04-1985 Electric light sources Caps Screw caps E14 Dimensions
PN E85200-07-1985 Electric light sources Caps Screw caps E40 Dimensions
PN G02047-1968 Percussion drilling Tool threads Dimensions
PN E85200-06-1985 Electric light sóurces Caps Screw caps E27/5lX39 Dimensions
PN G02040-1966 Core drilling Line-pipe threads Dimensions
PN L01402-1989 Aerospace screw threads Dimensions and tolerances for bolts, screws and nuts
PN E02505-1971 Edison threads Interna! thread for ceramical parts Dimensions and gauges

RO-ASRO

STAS 691-1988 EDISON SCREWTHREAD Dimensions
STAS 1270-1986 TYRE VALVE THREADS Dimensions
STAS 1112/11-1990 Screw cutting tools. Taps for pipe threads. Dimensions
STAS 10651-1976 SCREWED GLANDS FOR CABLES Dirpensions
STAS 8498-1988 PASSAGE SCREWED GLANDS FOR CABLES AND WIRES AT ELECTROTECHNICAL EQUIPEMENTS Shapes and dimensions
STAS 2114/2-1975 ISO TRAPEZOIDAL SCREW THREADS Nominal diameters and pitches
STAS 6936/9-1976 Threaded fittings for refrigerating plants TEES Dimensions
STAS 5326-1979 SCREW THREAD FOR CYCLES Nominal prolile and sizes
STAS 2114/3-1975 ISO TRAPEZOIDAL SCREW THREADS Basic sizes
STAS 4851-1980 THREADED TAPER PIN, WITH STEM Dimensions
STAS 3379/2-1979 HOLE BOR IN G CUTTERS FOR METRIC THREAD Dimensions
STAS 1112/9-1979 Taps for metric thread NUT TAPS Dimensions
STAS 8795-1987 Tapping screws SCREW THREAD AND THREAD END Dimensions
STAS 8957-1971 CIRCULAR SCREWING DIES FOR GAS PIPE THREAD WITH THREAD TIGHTENING Dimensions
STAS 7529-1966 Long Trapezoidal Thread Size/Dimensions
STAS 402-1988 PIPE TIIREADS WIIERE PRESSURE-TIGUT JOINTS ARE MADE ON TUE FHREADS Dimensions and tolerances
STAS 3379/3-1979 TA PER SHANK CUTTERS FOR METRIC THREAD Dimcns ioiis
STAS 5019-1988 Seamless steel pipes THKKADS FOR CAS1NG PIPES Dimcnsions
STAS 8956-1971 CIRCULAR SCREWING DIES FOR GAS-PIPE THREAD WITHOUT THREAD TIGHTENING Dimensions
STAS 1160/7-1980 ROUND SCREW DIES FOR METRIC SCREW THREAD Dimensions
STAS 1112/13-1975 TAPS FOR INCH TAPER THREAD (BRIGGS) Dimensions
STAS 8121/2-1984 Threaded components for flange mounting STUDS Dimensions
STAS 10654-1976 Machine retaining devices THREADED PLUGS Dimensions
STAS 7805-1980 TAPERED PINS WITH FEMALE THREAD Dimensions
STAS 1112/12-1979 TAPS FOR TAPER METRIC THREAD Dimensions
STAS 7900-1976 TOOL MANDREL FOR WORM COUNTERBORE Dimensions
STAS 2093-1984 GAUGES FOR CONDWIT SCREW THREADS WITH MANTLE. D IMENS ION S.
STAS 6936/11-1976 Threaded fittir gs for refrigerating plants CAP NUT Dimcnsions
STAS 485-1990 Malleable cast iron fittings threaded NUTS Main dimensions
STAS 9247/3-1973 E 16 screw fuses SCREWED CAPS Shapes and dimensions
STAS 9928-1974 BUTTON FOR SELF-LOCKING THREADED PINS Dimensions

AT-ON

ONORM M 2012-1983 Tapped holes and screwed plugs with metric pipe thread, fine, for pipe unions, jitüngs and screw plugs; design dimensions
ONORM ISO 7 Teil.1:1984 Pipe threads where pressure-tight joints are made on the threads; Designation, dimensions and tolerances
ONORM ISO 228 Teil.1:1982 Pipe threads where pressure-tight joints are not made on the threads; Designation, dimensions and tolerances
ONORM ISO 2904:1983 ISO metric trapezoidal screw threads; basic dimensions
ONORM M 1512-1967 Metric ISO - thread. Fine thread with nominal pitch size 4 mm
ONORM M 1506-1967 Metric ISO - thread. Fine thread with nominal slope dimension 0.5 mm

Korean Agency for Technology and Standards (KATS)

KS B 1006-2016 Hole Sizes Before Threading
KS B 1006-2016(2021) Hole Sizes Before Threading
KS B 0245-1987 Thread Run-Outs and Thread Undercuts for External Threaded Fasteners
KS B ISO 7852-2014(2019) Earth-moving machinery — Plough bolt heads — Shapes and dimensions(excluding thread dimensions)
KS B ISO 7852:2014 Earth-moving machinery — Plough bolt heads — Shapes and dimensions(excluding thread dimensions)
KS B ISO 7852:2004 Earth-moving machinery-Plough bolt heads-Shapes and dimensions(excluding thread dimensions)
KS B ISO 7852-2019 Earth-moving machinery — Plough bolt heads — Shapes and dimensions(excluding thread dimensions)
KS B 0219-2008(2018) Limit of sizes tolerances for metric trapezoidal screw threads
KS B 0219-1983 Limit of sizes tolerances for metric trapezoidal screw threads

HU-MSZT

MSZ 884/1-1987 Thread shape and size
MSZ 884/2-1987 Threaded T-piece shapes and dimensions

TR-TSE

TS 61-1978 Screvv Threads (Shabes And Dimensions)

GSO

GSO ISO 7852:2013 Earth-moving machinery -- Plough bolt heads -- Shapes and dimensions (excluding thread dimensions)
OS GSO ISO 725:2013 ISO inch screw threads -- Basic dimensions
GSO ISO 262:2008 ISO general-purpose metric screw threads – Selected sizes for screws, bolts and nuts
BH GSO ISO 725:2016 ISO inch screw threads -- Basic dimensions
BH GSO ISO 7852:2016 Earth-moving machinery -- Plough bolt heads -- Shapes and dimensions (excluding thread dimensions)
OS GSO ISO 7852:2013 Earth-moving machinery -- Plough bolt heads -- Shapes and dimensions (excluding thread dimensions)
GSO ISO 724:2008 ISO general-purpose metric screw threads – Basic dimensions
BH GSO ISO 2904:2016 ISO metric trapezoidal screw threads -- Basic dimensions
GSO ISO 2904:2013 ISO metric trapezoidal screw threads -- Basic dimensions

(U.S.) Ford Automotive Standards

FORD WA972-1996 THREAD DIMENSIONS FOR LOCKING THREADS - ROOT INTERFERENCE TYPE

AR-IRAM

IRAM 5244-1961 Thread dimensions and thread ends of traction screws
IRAM 5133-1959 Dimensions of threaded spindle crankneck
IRAM 6017-1963 Dimensions of plastic screw caps for glasses

RU-GOST R

GOST 16868-1971 Threaded spindel ends. Dimensions
GOST 6728-1991 Thred-grinding machines. Main parameters and dimensions
GOST 3469-1991 Mikroscopes. Screw threads for objectives. Dimensions
GOST 8960-1975 Ductile iron fittings with parallel thread for pipelines. Threaded bushings. Basic dimensions
GOST 18816-1980 Handling threaded dowel. Design and dimensions
GOST 10608-1972 Hexagon nuts with reduced width across flat with thread diameter over 48 mm (Product grade A). Design and dimensions

German Institute for Standardization

DIN 405-1:1997 General purpose knuckle threads - Part 1: Profiles, nominal sizes
DIN 55525:1988 Preferred threads, for plastic and glass containers with unified screw cap; buttress thread; dimensions
DIN 852-1:1991 Bore type thread milling cutters for ISO metric threads; dimensions
DIN 40430:1971 Steel Conduit Thread; Dimensions
DIN 20401:2004-12 Buttress threads - 0,8 mm to 2 mm pitch - Dimensions
DIN 1893-1:1978 Disc type thread milling cutters for ISO metric trapezoidal threads; dimensions
DIN 3858:2005 Whitworth pipe threads for pipe unions - Parallel internal thread and taper external thread - Dimensions
DIN 20401:2004 Buttress threads - 0,8 mm to 2 mm pitch - Dimensions
DIN EN ISO 228-1 Bb.1:2003 Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation; Limits of size
DIN 2999-1:1983 Pipe threads for tubes and fittings; parallel internal thread and taper external thread; tread dimensions
DIN 30295-1:1973-05 Rounded Trapezoidal Threads; Nominal Dimensions
DIN 3858:1988 Whitworth pipe threads for pipe couplings; parallel internal threads and taper external threads; thread dimensions
DIN 168-1:1998 Glass container knuckle thread finishes - Thread sizes
DIN 14-4:1987 ISO-metric screw thread; screw threads below 1 mm diameter; limits
DIN 14-2:1987 ISO-metric screw thread; screw threads below 1 mm diameter; nominal dimensions
DIN 103-4:1977-04 ISO Metric Trapezoidal Screw Thread; Nominal Dimensions
DIN 103-4:1977 ISO Metric Trapezoidal Screw Thread; Nominal Dimensions
DIN ISO 724:2010-01 ISO general purpose metric screw threads - Basic dimensions (ISO 724:1993 + Cor. 1:2009) / Note: To be replaced by DIN ISO 724 (2022-11).
DIN ISO 724:2022-11 ISO general purpose metric screw threads - Basic dimensions (ISO/DIS 724:2022); Text in German and English / Note: Date of issue 2022-10-07*Intended as replacement for DIN ISO 724 (2010-01).
DIN 3858:2005-08 Whitworth pipe threads for pipe unions - Parallel internal thread and taper external thread - Dimensions
DIN 8140-3:1993 Wire thread inserts for ISO metric screw threads; gauges and gauge sizes
DIN 1449:1970 Conical shaft ends with internal thread; dimensions

Association Francaise de Normalisation

NF P08-102:1963 Roofing. General. Dimensional inspection of corrugated sheets.
NF F00-016:1992 Matériel ferroviaire en général - Filetages à filet rond - Dimensions et tolérances.
NF E03-014*NF ISO 262:1999 ISO general purpose metric screw threads. Selected sizes for screws, bolts and nuts.
NF ISO 2904:2020 Metric ISO Trapezoidal Threads - Basic Dimensions
NF E03-622:2004 ISO metric trapezoidal screw threads - Basic dimensions.

International Organization for Standardization (ISO)

ISO 724:1978 ISO metric screw threads — Basic dimensions
ISO 725:1978 ISO inch screw threads; Basic dimensions
ISO 725:2009 ISO inch screw threads - Basic dimensions
ISO 7852:1983 Earth-moving machinery; Plough bolt heads; Shapes and dimensions (excluding thread dimensions)
ISO 2904:1977 ISO metric trapezoidal screw threads; Basic dimensions
ISO 724:2023 ISO general purpose metric screw threads — Basic dimensions
ISO 2904:2020 ISO metric trapezoidal screw threads — Basic dimensions
ISO 5855-2:1999 Aerospace - MJ threads - Part 2: Limit dimensions for bolts and nuts

Japanese Industrial Standards Committee (JISC)

JIS B 1004:2009 Hole sizes before threading
JIS B 1007:1987 Threads and thread ends for tapping screws
JIS C 2515:1963 Dimensions for screw cores made of ferromagnetic oxides

SCC

DANSK DS/ISO 725:2009 ISO inch screw threads - Basic dimensions
AS B53:1939 Pipe threads. Basic sizes and tolerances
NS 1074-2:1971 Metric screw threads — ISO profile — Limits of sizes for commercial bolts and nut threads
DIN 158-2 E:1963 Draft Document - Metric taper threads cones 1:16 - Thread limit dimensions
DANSK DS/ISO 724:1995 ISO general-purpose metric screw threads – Basic dimensions
DANSK DS/ISO 2904:2020 ISO metric trapezoidal screw threads – Basic dimensions
NS 1073-3:1970 Metric screw thread — ISO profile — Basic dimensions

CZ-CSN

CSN 01 3010-1962 Representation and dimensioning of threads, bolts and nuts
CSN 22 3074-1978 Nut taps for metric threads. Basic dimensions
CSN 22 3376-1987 Thread milling cutters with tapered shank for internal metric threads. Basic dimensions
CSN 22 3381-1987 Shell-type thread milling cutters for internal metric threads. Basic dimensions
CSN 22 3380-1987 Shell — type thread milling cutters for the external metric threads Basic dinicnsions
CSN 22 3380-1989 Threading tools. Shell type outside metric thread milling cutters. Basic dimensions
CSN 22 3374-1987 Thread milling cutters with a tapered shank for external metric threads. Basic dimensions
CSN 20 0468-1989 The metal working machines. The threading machines. The series. The sizes

NL-NEN

NEN 81-1982 ISO Metric screw thread - Coarse pitch - Basic dimensions

YU-JUS

JUS K.D2.130-1990 Shell type thread milling cutters for JSO metric threads; dimensions
JUS M.B6.924-1985 Pneumatic tubing. Screwed elbow. Shape and dimensions
JUS M.B0.062-1977 ISO Metric trapezoidal screw threads. Basic sizes

Aerospace Industries Association/ANSI Aerospace Standards

AIA/NAS NAS932-2012 DRILLS -THREADED HEXAGONAL SHANK SIZES
AIA/NAS NASM33537-2002 Insert, Screw Thread, Helical Coil, Inch Series, Coarse and Fine Thread, Standard Assembly Dimensions for FSC 5340

AENOR

UNE 115244:2005 Earth-moving machinery. Plough bolt heads. Shapes and dimensions (excluding thread dimensions)
UNE 17704:2002 ISO general-purpose metric screw threads. Basic dimensions .

PH-BPS

PNS ISO 7852:2021 Earth-moving machinery - Plough bolt heads - Shapes and dimensions (excluding thread dimensions)

ZA-SANS

SANS 1700-2-11:1996 Fasteners.Part 2:Screw threads.Section 11:ISO inch screw threads.Basic dimensions

Standard Association of Australia （SAA）

AS ISO 7852:2021 Earth-moving machinery — Plough bolt heads — Shapes and dimensions (excluding thread dimensions)

TH-TISI

TIS 2362-2007 Iso metric trapezoidal screw threads.basic dimensions

British Standards Institution (BSI)

BS ISO 724:2023 ISO general purpose metric screw threads. Basic dimensions
BS ISO 725:2009 ISO inch screw threads - Basic dimensions
BS 6490:1984 Specification for shapes and dimensions (excluding thread dimensions) of plough bolt heads for earth-moving machinery
BS ISO 2904:2020 ISO metric trapezoidal screw threads. Basic dimensions

American National Standards Institute （ANSI)

ANSI/ASME B1.30-2002 Screw Threads: Standard Practice for Calculating and Rounding Dimensions

Defense Logistics Agency

DLA MS51837 VALID NOTICE 1-1988 INSERT, SCREW THREAD - THREAD FORMING HOLE DIMENSIONS FOR AND INSTALLATION OF
DLA MS51837 VALID NOTICE 3-2006 INSERT, SCREW THREAD - THREAD FORMING HOLE DIMENSIONS FOR AND INSTALLATION OF
DLA MS51837-1967 INSERT, SCREW THREAD - THREAD FORMING HOLE DIMENSIONS FOR AND INSTALLATION OF