Classification of test equipment

Classification of test equipment, Total:492 items.

The international standard classification for "Classification of test equipment" includes: Hydraulic energy engineering , Environmental testing , Electrical apparatus for explosive atmospheres , Measurement of fluid flow , Electrical engineering in general , Measurement of electrical and magnetic quantities , Power stations in general , Vibrations, shock and vibration measurements , Deck equipment and installations , Livestock buildings, installations and equipment , Test conditions and procedures in general , Energy and heat transfer engineering in general , Electrical and electronic testing , Irrigation and drainage equipment , Chemical laboratories. Laboratory equipment , Gases for industrial application , Aircraft and space vehicles in general .

The Chinese standard classification for "Classification of test equipment" includes: Water power engineering , Basic standards and general methods , Low-voltage distribution electrical equipment , Explosion-proof electric apparatus , Flow capacity and material level instrument , Reliability and maintainability , Electric energy measurement and load control system , Non-metal chemical machinery equipment , Electric power testing technique , Mechanical vibration, impact equipment and dynamic balancing machine , Life saving apparatus , Stock and poultry raising machinery and tools , Technical management , Electric transmission and transformation equipment in general , Farming machinery and tools , Basic laboratory equipment , Gas separation and liquefaction equipment , Technical management , Technical management .

Professional Standard - Electricity

DL/T 5401-2007 Instrument allocation guide for electrical test of hydropower plant
DL/T 377-2010 The acceptance tests of high voltage direct current equipment
DL/T 1399.3-2019 Electric power testing and measuring vehicles. Part3: Multiple test vehicles for electric power equipment

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB 3836.20-2010 Explosive atmospheres - Part 20: Equipment with equipment protection level (EPL) Ga
GB/T 5170.9-2017 Inspection methods for environmental testing equipments―Part 9:Solar radiation testing equipments
GB/T 8187-1987 Milking machine installation-Mechanical tests
GB/T 13922.3-1992 Performance test for water treatment equipment - Filter
GB 7251.1-1997 Low-voltage switchgear and controlgear assemblies-Part 1: Type-tested and partially type-tested assemblies
GB/T 5170.2-2008 Inspection methods for environmental testing equipments for electric and electronic products - Temperature testing equipments
GB/T 8187-2005 Milking machine installations―Mechanical tests
GB/T 5170.8-2008 Inspection methods for environmental testing equipments for electric and electronic products—Salt mist testing equipments
GB/T 5170.20-2022 Inspection methods for environmental testing equipments—Part 20：Water testing equipments
GB/T 13922.2-1992 Performance test for water treatment equipment - Ion exchange equipment
GB/T 5080.2-1986 Equipment reliability testing--Guidance for the design of test cycles
GB/T 7994.1-2014 Test method of glass-lined equipments―Part 1:Hydraulic pressure test
GB/T 7994.2-2014 Test method of glass-lined equipments―Part 2:Gas leak test
GB/T 5170.11-2008 Inspection methods for environmental testing equipments for electric and electronic products - Corrosive gas testing equipments
GB/T 5170.10-2008 Inspection methods for environmental testing equipments for electric and electronic products - Combined high and low temperature/low air pressure testing equipments
GB/T 5170.22-2024 Inspection methods environmental testing equipment—Part 22:The equipment for acoustic vibration test in reverberation field
GB 7288.1-1987 Equipment reliability testing; Preferred test conditions; Indoor portable equipment; Low degree of simulation
GB 5080.2-1986 Equipment reliability testing - Guidance for the design of test cycles
GB/T 17215.211-2006 Electricity metering equipment (AC)—General requirements, tests and test conditions— Part 11: Metering equipment
GB 5080.5-1985 Equipment reliability testing - Compliance test plans for success ratio
GB/T 5170.11-2017 Inspection methods for environmental testing equipments—Part 11: Corrosive gas testing equipments
GB/T 778.3-1996 Measurement of water flow in closed conduits--Meters for cold potable water--Part 3:Test methods and equipment
GB/T 18328.1-2009 Vibration generating machines - Guidance for selection - Part 1: Equipment for environmental testing
GB/T 5170.2-2017 Inspection methods for environmental testing equipments―Part 2:Temperature testing equipments
GB/T 8187-2011 Milking machine installations—Mechanical tests
GB/T 5170.5-2008 Inspection methods for environmental testing equipments for electric and electronic products - Damp heat testing equipments
GB/T 5170.10-2017 Inspection methods for environmental testing equipments―Part 10:Combined high and low temperature/low air pressure testing equipments
GB/T 17627.2-1998 High-voltage test techniques for low-voltage equipment Part 2: Measuring system and test equipment
GB/T 32234.9-2023 Personal flotation devices—Part 9：Evaluation
GB 5080.2 86 Equipment reliability testing Guidance for the design of test cycles
GB/T 7288.1-1987 Equipment reliability testing--Preferred test conditions--Indoor portable equipment--Low degree of simulation
GB/T 5170.8-2017 Inspection methods for environmental testing equipments―Part 8:Salt mist testing equipments
GB/T 5170.18-2022 Inspection methods for environmental testing equipments—Part 18：Composite temperature/humidity cyclic testing equipments
GB/T 5170.9-2008 Inspection methods for environmental testing equipments for electric and electronic products - Solar radiation testing equipments
GB 7251.1-2005 Low-voltage switchgear and controlgear assemblies Part 1:Type-tested and partially type-tested assemblies

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 5170.19-2018 Inspection methods for environmental testing equipments—Part 19:Combined temperature vibration(sinusoidal)testing equipment
GB/T 17215.211-2021 Electricity metering equipment(AC)—General requirements, tests and test conditions—Part 11：Metering equipment
GB/T 40076-2021 Agricultural irrigation equipment—Filters—Verification of filtration grade
GB/T 17215.221-2021 Electricity metering equipment(a. c. ) -- General requirements, tests and test conditions -- Part 21: Tariff and load control equipment
GB/T 17627-2019 High-voltage test techniques for low-voltage equipment—Definitions,test and procedure requirements,test equipment
GB/T 40326-2021 Energy efficiency grades for laboratory equipment—Drug stability test chambers

Professional Standard - Machinery

JB/T 9512-2018 Noise emitted by climate environmental testing equipment-Determination of sound power levels using sound pressure
JB/T 9512-1999 Climate environmental testing equipment and cabinet-determination of sound power level of noise emitted
JB/T 9078.2-1999 Performance test methods for natural gas separation plants

Professional Standard - Energy

NB/T 20040-2011 Seismic Qualification Test Rules of Safety Classified Electrical Equipment for Nuclear Power Plants
DL/T 1399.7-2021 Electric power testing and measuring vehicles -Part 7:Testing vehicles for insulating oil and gas in the electrical equipment
NB/T 20040-2021 Seismic qualification test rules of safety classified electrical equipment for nuclear power plants

Taiwan Provincial Standard of the People's Republic of China

CNS 14166-1998 General rules for qualification of nuclear safety grade electrical equipment
CNS 14372-1999 General rules for seismic qualification of nuclear safty grade electrical equipment

Professional Standard - Post and Telecommunication

YD/T 4500-2023 Test methods for carrier grade NAT64 devices
YD/T 2379.4-2011 Environmental Test Requirements and Test Methods for Telecommunication Equipment Part 4: Terminal Equipment
YD/T 3221-2017 Test method for carrier grade NAT(NAT44)
YD/T 2379.2-2011 Environmental Test Requirements and Test Methods for Telecommunications Equipment Part 2: Telecommunication Equipment in Central Room
YD/T 2379.3-2013 Environmental test requirements and test methods for telecommunications equipment--Part 3: Telecommunication equipment in noncentral machine room

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 5170.5-2016 Inspection methods for environmental testing equipments for electric and electronic products―Part 5:Damp heat testing equipments
GB/T 17215.831-2017 Electricity metering equipment (AC)—Acceptance inspection—Part 31: Particular requirements for static meters for active energy (classes 0.2 S, 0.5 S, 1 and 2)
GB/T 17215.821-2017 Electricity metering equipment (AC)—Acceptance inspection—Part 21: Particular requirements for electromechanical meters for active energy (classes 0.5, 1 and 2)

工业和信息化部

YD/T 2379.10-2020 Environmental test requirements and test methods for telecommunications equipment - Part 10: Airborne equipment for civil aircraft
YD/T 2379.9-2019 Environmental test requirements and test methods for telecommunication equipment Part9:Shipborne equipment
YD/T 2379.11-2022 Environmental test requirements and test methods for telecommunication equipment Part 11: Underground equipment of stationary use
YD/T 3017-2016 Energy efficiency class specification forthe mobile core network equipment
YD/T 3893-2021 Environmental Testing for Telecommunication Equipment - wind Load Test

中国民用航空局

MH/T 9011-2021 Specification for advanced aviation training device asssment

Professional Standard - Electron

SJ 2584-1985 Qualification test and acception test for reliability of radar equipment
SJ/Z 9065-1987 Laboratory equipment

Military Standard of the People's Republic of China-General Armament Department

GJB 150.12-1986 Environmental test methods for military equipment Sand and Dust Test
GJB 150.8-1986 Environmental test methods for military equipment rain test
GJB 150.16-1986 Environmental test methods for military equipment Vibration test
GJB 4.11-1983 Environmental testing of ship electronic equipment Salt spray test
GJB 150.3-1986 Environmental test methods for military equipment High temperature test
GJB 4.3-1983 Environmental testing of ship electronic equipment Low temperature testing
GJB 150.11-1986 Environmental test methods for military equipment Salt spray test
GJB 150.4-1986 Environmental test methods for military equipment Low temperature test
GJB 150.17-1986 Environmental test methods for military equipment Noise test
GJB 5199-2004 Test method for ship communication jamming equipment test site
GJB 5818-2006 Interface requirements for test equipment in electronic warfare site
GJB 150.10-1986 Environmental test methods for military equipment Mold testing
GJB 150.18-1986 Environmental testing methods for military equipment Impact testing
GJB 150.9-1986 Laboratory environmental test methods for military materiel.Part 9:Damp heat test
GJB 4.10-1983 Environmental testing of ship electronic equipment Mold testing
GJB 1558.3-2012 Electronic Countermeasures Equipment Test Rules Part 3: Missile-borne Electronic Countermeasures Equipment
GJB 4.8-1983 Environmental test of ship electronic equipment, vibration test
GJB 150.15-1986 Environmental test methods for military equipment Acceleration test
GJB 4.7-1983 Environmental testing of ship electronic equipment and vibration testing
GJB 4.2-1983 Environmental testing of ship electronic equipment High temperature testing
GJB 150.21-1987 Environmental test methods for military equipment Wind pressure test
GJB 38.45B-2020 Conventional Submarine Mooring and Navigation Test Procedures Part 45: Testing of Galley Equipment and Electric Heating Equipment
GJB 150.14-1986 Environmental test methods for military equipment - immersion test

国家铁路局

TB/T 3538-2018 Test specification for CTCS-3 onboard ATP
TB/T 3565-2020 Test specification for CTCS-2 onboard ATP

Professional Standard - Aerospace

QJ 2311-1992 Standard for Technical Rating of Equipment

Group Standards of the People's Republic of China

T/CCCTA 0045-2024 Classification of corrosion environments for power transmission and transformation equipment
T/CPASE GT008-2019 Classification grading of special equipment accident potential

Guangdong Provincial Standard of the People's Republic of China

DB4403/T 433-2024 Standards for grading and evaluation of electric vehicle super charging equipment

Shanghai Provincial Standard of the People's Republic of China

DB31/T 1184-2019 Guidance on Classification and Classification of Hidden Hazards of Special Equipment
DB31/T 1186-2019 General rules for risk management and control of special equipment

Professional Standard - Nuclear Industry

EJ/T 1197-2007 Testing method and environment condition for qualification of electrical equipment of the safety system in nulear power plants

Professional Standard - Agriculture

GB 8187-1987 Test methods for milking equipment

Xinjiang Provincial Standard of the People's Republic of China

DB65/T 2728-2007 Dry fruit classifying machine testing method

Chongqing Provincial Standard of the People's Republic of China

DB50/T 1304-2022 General rules for risk management and control of special equipment

Professional Standard - Military and Civilian Products

WJ 2348-1995 Test Accidents and Hazard Classification in Light Weapons Proving Ground

工业和信息化部/国家能源局

JB/T 13131-2017 Feed sizing screen-Test methods

SCC

BS 1610-1:1985 Materials testing machines and force verification equipment.-Specification for the grading of the forces applied by materials testing machines
DANSK DS/EN 50470-1:2007 Electricity metering equipment (a.c.) - Part 1: General requirements, tests and test conditions - Metering equipment (class indexes A, B and C)
DANSK DS/EN 61180-2:2012 High-voltage test techniques for low-voltage equipment - Part 2: Test equipment
BS 1610-3:1990 Materials testing machines and force verification equipment-Specification for the grading of the forces applied by deadweight and lever creep testing machines
CEI EN 61180-2:1997 High-voltage test techiniques for low-voltage equipment - Part 2: Test equipment
BS 1610-1:1992 Materials testing machines and force verification equipment-Specification for the grading of the forces applied by materials testing machines when used in the compression mode
BS 3407:1969 Test code for coke screening plant
NS-EN 14462:2005 Surface treatment equipment — Noise test code for surface treatment equipment including its ancillary handling equipment — Accuracy grades 2 and 3
DIN EN 50470-1:2019 Electricity metering equipment (a.c.) - Part 1: General requirements, tests and test conditions - Metering equipment (class indexes A, B and C); German version EN 50470-1:2006 + A1:2018
NS-EN 14462:2015 Surface treatment equipment — Noise test code for surface treatment equipment including its ancillary handling equipment — Accuracy grades 2 and 3
BS 3407:1961 Test code for coke screening plant
DIN EN 14462 E:2013 Draft Document - Surface treatment equipment - Noise test code for surface treatment equipment including its ancillary handling equipment - Accuracy grades 2 and 3; German version prEN 14462:2012
DANSK DS/EN IEC 62052-11:2021 Electricity metering equipment – General requirements, tests and test conditions – Part 11: Metering equipment
AENOR UNE-EN IEC 62052-11/A11:2022 Electricity metering equipment - General requirements, tests and test conditions - Part 11: Metering equipment
CEI EN 60439-1:2000 Low-voltage switchgear and controlgear assemblies - Part 1: Type-tested and partially type-tested assemblies
CEI EN 60512-2-1:2003 Connectors for electronic equipment - Tests and measurements - Part 2-1: Electrical continuity and contact resistance tests Test 2a: Contact resistance - Millivolt level method
DANSK DS/EN 62052-11:2003 Electricity metering equipment (a.c.) – General requirements, tests and test conditions – Part 11: Metering equipment
DIN EN IEC 62052-11/AA E:2022 Draft Document - Electricity metering equipment - General requirements, tests and test conditions - Part 11: Metering equipment; German and English version EN IEC 62052-11:2021/FprAA:2022
CEI EN 62052-11/A1:2003 Electricity metering equipment (AC) - General requirements, tests and test conditions Part 11: Metering equipment
DANSK DS/EN 60439-1:2001 Low-voltage switchgear and controlgear assemblies - Part 1: Type-tested and partially type-tested assemblies
CEI EN 62052-11:2003 Electricity metering equipment (AC) - General requirements, tests and test conditions - Part 11: Metering equipment
ESD SP5.3.2-2008 Sensitivity Testing Socketed Device (SDM) Component Level
DANSK DS/IEC 68-3-3:1992 Environmental testing - Part 3: Guidance - Seismic test methods for equipments
BS EN IEC 62052-11:2021 Electricity metering equipment. General requirements, tests and test conditions-Metering equipment
VDI/VDE/DGQ/DKD 2618 BLATT 7.1:2019 Test equipment monitoring — test instructions for steel angles 90°
IEC 60439-1:1985 Low-voltage switchgear and controlgear assemblies - Part 1: Requirements for type-tested and partially type-tested assemblies
12/30265513 DC BS EN 61180. High-voltage test techniques for low voltage equipment. Definitions, test and procedure requirements, test equipment
BS EN 62052-11:2003+A1:2017 Electricity metering equipment (AC). General requirements, tests and test conditions-Metering equipment
ETSI TR 103 538-2019 Environmental Engineering (EE); Analysis of test method and test severity for mechanical test of equipment installed on poles/towers
BS PD ISO/TR 15155-2:2012 Agricultural irrigation equipment. Test facilities for agricultural irrigation equipment-Test facility operating manual
BS EN 62271-101:2013+A1:2018 High-voltage switchgear and controlgear-Synthetic testing
DANSK DS/EN 62353:2014 Medical electrical equipment - Recurrent test and test after repair of medical electrical equipment
IEC 60439-1:1999+AMD1:2004 CSV Low-voltage switchgear and controlgear assemblies - Part 1: Type-tested and partially type-tested assemblies
NS-EN 14154-3:2005 Water meters — Part 3 : Test methods and equipment
CEI EN 62353:2015 Medical electrical equipment - Recurrent test and test after repair of medical electrical equipment
BS EN 60439-1:1994 Specification for low-voltage switchgear and controlgear assemblies-Specification for type-tested and partially type-tested assemblies
DANSK DS/EN 60512-11-9:2002 Connectors for electronic equipment - Tests and measurements - Part 11-9: Climatic tests - Test 11i: Dry heat
DIN EN IEC 62052-11:2023 Electricity metering equipment - General requirements, tests and test conditions - Part 11: Metering equipment (IEC 62052-11:2020, modified); German version EN IEC 62052-11:2021 + A11:2022
CEI EN 60079-26:2015 Explosive atmospheres Part 26: Equipment with equipment protection level (EPL) Ga
VDI/VDE/DGQ 2618 BLATT 1.2:2003 Inspection of measuring and test equipment — Instructions for the inspection of measuring and test equipment for geometrical quantities — Uncertainty of measurement
DANSK DS/EN 60079-26:2015 Explosive atmospheres - Part 26: Equipment with Equipment Protection Level (EPL) Ga
DANSK DS/EN 60512-11-10:2002 Connectors for electronic equipment - Tests and measurements - Part 11-10: Climatic tests - Test 11j: Cold
AENOR UNE-EN 62353:2015 Medical electrical equipment - Recurrent test and test after repair of medical electrical equipment

Association Francaise de Normalisation

NF ISO 16900-14:2020 Respiratory protective devices - Test methods and test equipment - Part 14: sound level measurement
NF C41-107:1995 High-voltage test techniques for low-voltage equipment. Part 2 : test equipment.
NF C44-470-1*NF EN 50470-1:2007 Electricity metering equipment (a.c.) - Part 1 : general requirements, tests and test conditions - Metering equipment (class indexes A, B and C)
NF P98-440-2/A1:2006 Road restraint systems - Part 2 : performance classes, impact test acceptance criteria and test methods for safety.
NF C44-052-11:2021 Electricity metering equipment - General requirements, tests and test conditions - Part 11 : metering equipment
NF EN IEC 62052-11/A11:2022 Electricity metering equipment - General requirements, tests and test conditions - Part 11: Metering equipment
NF T35-025:2009 Surface treatment equipment - Noise test code for surface treatment equipment including its ancillary handling equipment - Accuracy grades 2 and 3.
NF A09-590-3*NF EN ISO 9934-3:2015 Non-destructive testing - Magnetic particle testing - Part 3 : equipment
NF EN IEC 62052-11:2021 Electricity metering equipment - General requirements, tests and test conditions - Part 11: metering equipment
NF C44-052-11*NF EN 62052-11:2003 Electricity metering equipment (AC) - General requirements, tests and test conditions - Part 11 : metering equipment
NF Z87-019-25:1995 Equipment engineering (ee). Environmental conditions and environmental tests for telecommunication equipment. Part 2-5 : specification of environmental tests. Ground vehicle installations.
NF E35-501-4:1992 Continuous quick freezing apparatus. Part 4 : acceptance testing.
NF EN IEC 62271-101:2021 Appareillage à haute tension - Partie 101 : essais synthétiques
NF C64-471-101:2006 High-voltage switchgear and controlgear - Part 101 : synthetic testing.
NF D30-500:2009 Test gases - Test pressures - Appliance categories.
NF D30-500/IN1:2009 Test gases - Test pressures - Appliance categories.
NF X15-204:1986 Laboratory equipment. Benches. Test methods.
NF C73-599*NF EN 50699:2020 Recurrent Tests of Electrical Equipment
NF C20-924-11-4*NF EN 60695-11-4:2012 Fire hazard testing - Part 11-4 : test flames - 50 W flames - Apparatus and confirmational test methods
NF C74-053:2008 Medical electrical equipment - Recurrent test and test after repair of medical electrical equipment.
NF C20-420*NF EN 60068-3-3:1994 Environmental testing. Part 3 : guidance seismic test methods for equipments.
NF M51-004-1:2009 Installation and equipment for liquefied natural gas - Design and testing of marine transfer systems - Part 1 : design and testing of transfer arms.
NF M51-004-2:2009 Installation and equipment for liquefied natural gas - Design and testing of marine transfer systems - Part 2 : design and testing of transfer hoses.
NF ISO 16900-7:2020 Respiratory protective devices - Test methods and test equipment - Part 7: practical performance test
NF X15-205:1986 Laboratory equipment. Furnitures. Test methods.
NF EN 61180:2016 Techniques des essais à haute tension pour matériels à basse tension - Définitions, exigences et modalités relatives aux essais, matériel d'essai
NF E32-110-15*NF EN 12952-15:2004 Water-tube boilers and auxiliary installations - Part 15 : acceptance tests
NF E17-001-3:2012 Water meters - Part 3 : test methods and equipment.
NF C63-421:1994 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES. PART 1 : TYPE-TESTED AND PARTIALLY TYPE-TESTED ASSEMBLIES. (EUROPEAN STANDARD EN 60 439-1).
NF EN 62052-21/A1:2017 Electricity metering equipment - General requirements, tests and test conditions - Part 21: pricing and load control equipment
NF E17-001-3/IN2:2012 Water meters - Part 3 : test methods and equipment.
NF EN 62052-21:2006 Electricity metering equipment - General requirements, tests and test conditions - Part 21: charging and load control equipment
NF C64-471-101/A1:2011 High-voltage switchgear and controlgear - Part 101 : synthetic testing.
NF C74-053*NF EN 62353:2015 Medical electrical equipment - Recurrent test and test after repair of medical electrical equipment
NF C20-325:1985 Equipment reliability testing Part 5:Compliance test plans for success ratio
NF S63-125:1990 Fire fighting equipment. Centrifugal pum. Tests.
NF Z87-019-22:1995 Equipment engineering (ee). Environmental conditions and environmental tests for telecommunication equipment. Part 2-2 : specification of environmental tests. Transport.
NF D14-504:1985 Sanitary appliances. Resistance of appliances to static charge. Test method.
NF C44-052-21*NF EN 62052-21:2006 Electricity metering equipment (a.c.) - General requirements, tests and test conditions - Part 21 : tariff and load control equipment
NF EN 60512-11-12:2002 Connectors for electronic equipment - Tests and measurements - Part 11-12: climatic tests - Test 11m: cyclic damp heat test

International Organization for Standardization (ISO)

ISO 16900-14:2015 Respiratory protective devices - Methods of test and test equipment - Part 14: Measurement of sound level
ISO 16900-14:2020 Respiratory protective devices — Methods of test and test equipment — Part 14: Measurement of sound pressure level
ISO 389-9:2009 Acoustics - Reference zero for the calibration of audiometric equipment - Part 9: Preferred test conditions for the determination of reference hearing threshold levels
ISO 2678-1:1977 Environmental tests for aircraft equipment — Part 1: Insulation resistance and high voltage tests for electrical equipment
ISO/TR 15155-2:2012 Agricultural irrigation equipment - Test facilities for agricultural irrigation equipment - Part 2: Test facility operating manual
ISO/TR 15155:2005 Test facilities for agricultural irrigation equipment
ISO 9934-3:2015 Non-destructive testing - Magnetic particle testing - Part 3: Equipment
ISO 9934-3:2002 Non-destructive testing - Magnetic particle testing - Part 3: Equipment
ISO/TR 15155-1:2018 Agricultural irrigation equipment - Test facilities for agricultural irrigation equipment - Part 1: General
ISO 12402-9:2006 Personal flotation devices - Part 9: Test methods
ISO 2678:1985 Environmental tests for aircraft equipment; Insulation resistance and high voltage tests for electrical equipment
ISO 18471:2015 Agricultural irrigation equipment - Filters - Verification of filtration grade
ISO 2678:1977 Title missing - Legacy paper document

British Standards Institution (BSI)

BS ISO 16900-14:2015 Respiratory protective devices. Methods of test and test equipment. Measurement of sound level
BS EN 50470-1:2006 Electricity metering equipment (a.c.). General requirements, tests and test conditions. Metering equipment (class indexes A, B and C)
BS EN 61180-2:1995 High-voltage test techniques for low-voltage equipment - Test equipment
BS 1610-3:1990(1999) Materials testing machines and force verification equipment — Part 3 : Specification for the grading of the forces applied by deadweight and lever creep testing machines
BS 1610-1:1992(1999) Materials testing machines and force verification equipment — Part 1 : Specification for the grading of the forces applied by materials testing machines whenused inthe compression mode
BS EN 60439-1:1999 Low-voltage switchgear and controlgear assemblies - Type-tested and partially type-tested assemblies
BS EN 14462:2015 Surface treatment equipment. Noise test code for surface treatment equipment including its ancillary handling equipment. Accuracy grades 2 and 3
BS EN 61180:2016 High-voltage test techniques for low-voltage equipment. Definitions, test and procedure requirements, test equipment
BS ISO 10752:2019 Coal sizing equipment. Performance evaluation
BS EN IEC 62271-101:2021 High-voltage switchgear and controlgear. Synthetic testing
BS ISO 2678:1985(2022) Environmental tests for aircraft equipment — Insulation resistance and high voltage tests for electrical equipment
BS EN 60079-26:2007 Explosive atmospheres. Equipment with equipment protection level (EPL) Ga
BS EN 14727:2006 Laboratory furniture. Storage units for laboratories. Requirements and test methods
BS EN 14727:2005 Laboratory furniture - Storage units for laboratories - Requirements and test methods
BS EN 62052-11:2003 Electricity metering equipment (AC) - General requirements, tests and test conditions - Metering equipment
BS EN 60512-4-2:2002 Connectors for electronic equipment - Tests and measurements - Voltage stress tests - Test 4b - Partial discharge
BS ISO 27327-1:2009 Fans - Air curtain units - Laboratory methods of testing for aerodynamic performance rating
19/30389169 DC BS EN 926-2 AMD1. Paragliding equipment. Paragliders. Part 2. Requirements and test methods for classifying flight safety characteristics
BS EN ISO 3738-2:2006 Hardmetals - Rockwell hardness test (scale A) - Preparation and calibration of standard test blocks
BS EN 62353:2008 Medical electrical equipment - Recurrent test and test after repair of medical electrical equipment
BS EN 62353:2014 Medical electrical equipment. Recurrent test and test after repair of medical electrical equipment
BS ISO 27327-1:2010 Fans. Air curtain units. Laboratory methods of testing for aerodynamic performance rating
BS EN 14154-3:2005+A2:2011 Water meters. Test methods and equipment
BS ISO 18471:2015 Agricultural irrigation equipment. Filters. Verification of filtration grade
BS EN 60512-22-1:2010 Connectors for electronic equipment. Tests and measurements. Part 22-1: Capacitance tests. Test 22a: Capacitance
BS EN 60512-2-1:2002 Connectors for electronic equipment - Tests and measurements - Electrical continuity and contact resistance tests - Test 2a - Contact resistance - Millivolt level method
BS 6140-1:1981 Test equipment for generating vibration - Methods of describing characteristics of electrodynamic test equipment for generating vibration
BS EN 12527:1999 Castors and wheels - Test methods and apparatus
BS EN 16714-2:2016 Non-destructive testing. Thermographic testing. Equipment

GSO

GSO ISO 16900-14:2021 Respiratory protective devices — Methods of test and test equipment — Part 14: Measurement of sound level
BH GSO ISO 16900-14:2022 Respiratory protective devices — Methods of test and test equipment — Part 14: Measurement of sound level
OS GSO IEC 61180-2:2014 High-voltage test techniques for low-voltage equipment - Part 2: Test equipment
GSO ISO 3450:2011 Earth-moving machinery - Braking systems of rubber-tyred machines - Systems and performance requirements and test procedures
BH GSO IEC 61180-2:2016 High-voltage test techniques for low-voltage equipment - Part 2: Test equipment
OS GSO ISO 10752:2013 Coal sizing equipment - Performance evaluation
BH GSO ISO 10752:2016 Coal sizing equipment - Performance evaluation
OS GSO 1519:2002 Low - voltage switchgear and controlgear assemblies Part 1 : Type - tested and partially type - tested assemblies
GSO ISO 10752:2013 Coal sizing equipment - Performance evaluation
OS GSO ISO 2678:2016 Environmental tests for aircraft equipment -- Insulation resistance and high voltage tests for electrical equipment
GSO ISO 11090-2:2015 Test conditions for die sinking electro-discharge machines (die sinking EDM) -- Testing of the accuracy -- Part 2: Double-column machines (slide-head type)
BH GSO ISO 2678:2017 Environmental tests for aircraft equipment -- Insulation resistance and high voltage tests for electrical equipment
BH GSO ISO 18471:2022 Agricultural irrigation equipment — Filters — Verification of filtration grade
GSO ISO 18471:2021 Agricultural irrigation equipment — Filters — Verification of filtration grade
GSO IEC 62052-11:2007 Electricity Metering Equipment (AC) - General Requirements Tests and Test Conditions Part II: Metering Equipment
GSO ISO 2678:2016 Environmental tests for aircraft equipment -- Insulation resistance and high voltage tests for electrical equipment
GSO ISO 5691:2008 Equipment for planting - Potato planters - Method of testing
GSO IEC 60079-26:2007 Explosive atmospheres - Part 26: Equipment with equipment protection level (EPL) Ga
GSO ISO 6506-2:2010 Metallic materials - Brinell hardness test – Part 2 : Verification and calibration of testing machines
BH GSO IEC 62052-21:2015 Electricity metering equipment (A.C.) - General requirements, tests and test conditions-Part 21: Tariff and load control equipment

American National Standards Institute （ANSI)

ANSI/ASHRAE Standard 204-2020 Method of Test for Rating Micro Combined Heat and Power Devices
ANSI/ASHRAE 195P-2013 Method of Test for Rating Air Terminal Unit Controls
ANSI/ASHRAE 174P-2009 Method of Test for Rating Desiccant-Based Dehumidification Equipment
ANSI/ASHRAE 37-2009 Methods of Testing for Rating Electrically Driven Unitary Air-Conditioning and Heat Pump Equipment
ANSI/IEEE 336:2005 Guide for Installation, Inspection, and Testing for Class 1E Power, Instrumentation, and Control Equipment at Nuclear Facilities
ANSI/ASHRAE 32.2-2018(2022) Methods of Testing for Rating Premix and Postmix Beverage Dispensing Equipment
ANSI PH3.713-1985 Photography (Equipment) - Environmental Testing
ANSI/ASHRAE 204-2020 ANSI/ASHRAE Standard 204-2020 Method of Test for Rating Micro Combined Heat and Power Devices
ANSI/ASHRAE 32.2-2003 Methods of Testing for Rating Pre-Mix and Post-Mix Beverage Dispensing Equipment

Spanish Association for Standardization (UNE)

UNE-EN 50470-1:2007 Electricity metering equipment (a.c.) -- Part 1: General requirements, tests and test conditions - Metering equipment (class indexes A, B and C)
UNE-EN 50470-1:2007/A1:2020 Electricity metering equipment (a.c.) - Part 1: General requirements, tests and test conditions - Metering equipment (class indexes A, B and C)
UNE-EN 62052-11:2004/A1:2018 Electricity metering equipment (AC) - General requirements, tests and test conditions - Part 11: Metering equipment
UNE-EN IEC 62052-11:2022/A11:2022 Electricity metering equipment - General requirements, tests and test conditions - Part 11: Metering equipment
UNE-EN IEC 62052-11:2022 Electricity metering equipment - General requirements, tests and test conditions - Part 11: Metering equipment
UNE-EN 60439-1:2001 Low-voltage switchgear and controlgear assemblies -- Part 1: Type-tested and partially type-tested assemblies.
UNE-EN 62353:2009 Medical electrical equipment - Recurrent test and test after repair of medical electrical equipment
UNE 100710:1992 AIR DISTRIBUTION AND AIR DIFFUSION. LABORATORY AERODYNAMIC TESTING AND RATING OF AIR TERMINAL DEVICES.
UNE-EN 60512-11-9:2003 Connectors for electronic equipment - Tests and measurements -- Part 11-9: Climatic tests - Test 11i: Dry heat.
UNE-EN 60079-26:2015 Explosive atmospheres - Part 26: Equipment with Equipment Protection Level (EPL) Ga
UNE-EN 62271-101:2007 High-voltage switchgear and controlgear -- Part 101: Synthetic testing (IEC 62271-101:2006)

European Committee for Standardization (CEN)

EN 50470-1:2006 Electricity metering equipment (a.c.) Part 1: General requirements, tests and test conditions - Metering equipment (class indexes A, B and C)
EN 14462:2015 Surface treatment equipment - Noise test code for surface treatment equipment including its ancillary handling equipment - Accuracy grades 2 and 3
EN ISO 3452-4:1998 Non-Destructive Testing - Penetrant Testing - Part 4: Equipment ISO 3452-4:1998
EN 16664:2015 Playing field equipment - Lightweight goals - Functional@ safety requirements and test methods
EN 14727:2005 Laboratory furniture - Storage units for laboratories - Requirements and test methods
prEN 956-1992 Non-destructive testing; penetrant testing; equipment
EN 12527:1998 Castors and wheels - Test methods and apparatus
EN 14462:2005 Surface treatment equipment - Noise test code for surface treatment equipment including its ancillary handling equipment - Accuracy grades 2 and 3 Incorporates Amendment A1: 2009

Korean Agency for Technology and Standards (KATS)

KS C IEC 61180-2:2006 High-voltage test techniques for low-voltage equipment－Part 2：Test equipment
KS C IEC 61180-2-2019 High-voltage test techniques for low-voltage equipment — Part 2：Test equipment
KS A IEC 60605-3-1:2002 Equipment reliability testing－Part 3：Preferred test conditions－Indoor portable equipment－Law degree of simulation
KS A IEC 60605-2-2002(2017) Equipment reliability testing－Part 2：Design of test cycles
KS A IEC 60605-2-2002(2022) Equipment reliability testing－Part 2：Design of test cycles
KS A IEC 60605-3-6:2002 Equipment reliability testing－Part 3：Preferred test conditions－Section 6：Test cycle 6：Outdoor transportable equipment－Low degree of simulation
KS A IEC 60605-3-1-2002(2022) Equipment reliability testing－Part 3：Preferred test conditions－Indoor portable equipment－Law degree of simulation
KS A IEC 60605-3-1-2002(2017) Equipment reliability testing－Part 3：Preferred test conditions－Indoor portable equipment－Law degree of simulation
KS C IEC 62052-11:2005 Electricity metering equipments(a.c)－General requirements, tests and test conditions－Part 11：Metering equipment
KS A IEC 60605-3-5:2002 Equipment reliability testing－Part 3：Preferred test conditions －Section 5：Test cycle 5：Ground mobile equipment－Low degree of simulation
KS C IEC 62271-101-2019 High-voltage switchgear and controlgear — Part 101: Synthetic testing
KS C 8111-2008 Testing methods for wiring devices
KS W 0926-2014 Environmental tests for aircraft equipment - Insulation resistance and high voltage tests for electrical equipment
KS C IEC 60512-2-1-2014 Connectors for electronic equipment－Tests and measurements－Part 2-1：Electrical continuity and contact resistance tests－Test 2a：contact resistance－Millivolt level method
KS C IEC 62052-11-2005(2020) Electricity metering equipments(a.c)－General requirements, tests and test conditions－Part 11：Metering equipment
KS C IEC 62271-101:2014 High-voltage switchgear and controlgear — Part 101: Synthetic testing
KS A IEC 60605-3-4:2002 Equipment reliability testing－Part 3：Preferred test conditions－Section 4：Test cycle 4：Equipment for portable and non－stationary use－Low degree of simulation
KS A IEC 60605-3-6-2002(2022) Equipment reliability testing－Part 3：Preferred test conditions－Section 6：Test cycle 6：Outdoor transportable equipment－Low degree of simulation
KS A IEC 60605-3-5-2002(2022) Equipment reliability testing－Part 3：Preferred test conditions －Section 5：Test cycle 5：Ground mobile equipment－Low degree of simulation
KS A IEC 60605-3-3:2002 Equipment reliability testing－Part 3：Preferred test conditions Section 3：Test cycle 3：Equipment for stationary use in partially weatherprotected locations－Low degree of simulation
KS C IEC 60974-4:2014 Arc welding equipment — Part 4: In-service inspection and testing
KS A IEC 60605-3-6-2002(2017) Equipment reliability testing－Part 3：Preferred test conditions－Section 6：Test cycle 6：Outdoor transportable equipment－Low degree of simulation
KS C 8111-1984 Testing methods for wiring devices
KS C IEC 60439-1:2003 Low-voltage switchgear and controlgear assemblies－Part 1：Type-tested and partially type-tested assemblies
KS A IEC 60605-3-2:2002 Equipment reliability testing-Part 3:Preferred test conditions-Equipment for stationary use in weatherprotected location-High degree of simulation
KS A IEC 60605-3-5-2002(2017) Equipment reliability testing－Part 3：Preferred test conditions －Section 5：Test cycle 5：Ground mobile equipment－Low degree of simulation
KS C IEC 60068-3-3:2020 Environmental testing — Part 3-3: Guidance seismic test methods for equipments
KS B 6334-2013 Testing methods of floatation equipments
KS W 0926-1997(2012) Environmental tests for aircraft equipment - Insulation resistance and high voltage tests for electrical equipment
KS C IEC 60512-6-2-2003(2008) Connectors for electronic equipment－Tests and measurements－Part 6－2：Dynamic stress tests－Test 6b：Bump
KS B ISO 18471:2022 Agricultural irrigation equipment — Filters — Verification of filtration grade
KS A IEC 60605-3-2-2002(2017) Equipment reliability testing－Part 3：Preferred test conditions－Equipment for stationary use in weatherprotected location－High degree of simulation
KS A IEC 60605-3-4-2002(2017) Equipment reliability testing－Part 3：Preferred test conditions－Section 4：Test cycle 4：Equipment for portable and non－stationary use－Low degree of simulation
KS C IEC 60512-11-10:2014 Connectors for electronic equipment－Tests and measurements－Part 11－10：Climatic tests－Test 11j：Cold
KS C IEC 60079-26:2012 Explosive atmospheres－ Part 26：Equipment with equipment protection level(EPL) Ga
KS C IEC 60512-11-10:2004 Connectors for electronic equipment-Tests and measurements-Part 11-10:Climatic tests-Test 11j:Cold
KS C IEC 62052-21:2017 Electricity metering equipment (a.c.) ― General requirements, tests and test conditions ― Part 21: Tariff and load control equipment
KS C IEC 60512-11-10-2014 Connectors for electronic equipment－Tests and measurements－Part 11－10：Climatic tests－Test 11j：Cold
KS C 0243-2001(2011) Environmental testing Part 2：Tests－Test Ec： Drop and topple, primarily for equipment－type specimens
KS C IEC 60512-4-2:2014 Connectors for electronic equipment－Tests and measurements－Part 4－2：Voltage stress tests－Test 4b：Partial discharge

International Electrotechnical Commission (IEC)

IEC 61180-2:1994 High-voltage test techniques for low-voltage equipment - Part 2: Test equipment
IEC 60605-2:1994 Equipment reliability testing - Part 2: Design of test cycles
IEC 62052-11:2003+AMD1:2016 CSV Electricity metering equipment (a.c.) - General requirements, tests and test conditions - Part 11: Metering equipment
IEC 62052-11:2020 Electricity metering equipment (a.c.) - General requirements, tests and test conditions - Part 11: Metering equipment
IEC 62052-11:2003 Electricity metering equipment (AC) - General requirements, tests and test conditions - Part 11: Metering equipment
IEC 62271-101:2012/AMD1:2017 High-voltage switchgear and controlgear - Part 101: Synthetic testing
IEC 60605-3-5:1996 Equipment reliability testing - Part 3: Preferred test conditions - Section 5: Test cycle 5: Ground mobile equipment - Low degree of simulation
IEC 60605-3-6:1996 Equipment reliability testing - Part 3: Preferred test conditions - Section 6: Test cycle 6: Outdoor transportable equipment - Low degree of simulation
IEC 62271-101:2006 High-voltage switchgear and controlgear - Part 101: Synthetic testing
IEC 62271-101:2017 High-voltage switchgear and controlgear - Part 101: Synthetic testing
IEC 62271-101:2012+AMD1:2017 CSV High-voltage switchgear and controlgear - Part 101: Synthetic testing
IEC 62271-101:2021 High-voltage switchgear and controlgear - Part 101: Synthetic testing
IEC 62271-101:2010 High-voltage switchgear and controlgear. Part 101: Synthetic testing
IEC 60605-3-5:1996/COR1:1996 Equipment reliability testing - Part 3: Preferred test conditions - Section 5: Test cycle 5: Ground mobile equipment - Low degree of simulation
IEC 62353:2007 Medical electrical equipment - Recurrent test and test after repair of medical electrical equipment
IEC 62271-101:2012 High-voltage switchgear and controlgear - Part 101: Synthetic testing
IEC 60439-1:2004 Low-voltage switchgear and controlgear assemblies - Part 1: Type-tested and partially type-tested assemblies
IEC 60605-3-1:1986 Equipment reliability testing. Part 3 : Preferred test conditions. Indoor portable equipment - Low degree of simulation
IEC TS 60695-11-3:2000 Fire hazard testing - Part 11-3: Test flames - 500 W flames - Apparatus and confirmational test methods
IEC TS 60695-11-4:2004 Fire hazard testing - Part 11-4: Test flames - 50 W flames - Apparatus and confirmational test methods
IEC TS 60695-11-3:2004 Fire hazard testing - Part 11-3: Test flames - 500 W flames - Apparatus and confirmational test methods
IEC 62353:2014 Medical electrical equipment - Recurrent test and test after repair of medical electrical equipment
IEC 62052-21:2004+AMD1:2016 CSV Electricity metering equipment (a.c.) - General requirements, tests and test conditions - Part 21: Tariff and load control equipment
IEC TR3 60736:1982 Testing equipment for electrical energy meters
IEC 62052-21:2004 Electricity metering equipment (a.c.) - General requirements, tests and test conditions - Part 21: Tariff and load control equipment
IEC 60068-3-3:1991 Environmental testing; part 3: guidance; seismic test methods for equipments
IEC 60605-3-4:1992 Equipment reliability testing; part 3: preferred test conditions; section 4: test cycle 4: equipment for portable and non-stationary use; low degree of simulation

German Institute for Standardization

DIN EN 50470-1:2007 Electricity metering equipment (a.c.) - Part 1: General requirements, tests and test conditions - Metering equipment (class indexes A, B and C); German version EN 50470-1:2006
DIN EN 61180-2:1995 High-voltage test techniques for low-voltage equipment - Part 2: Test equipment (IEC 61180-2:1994); German version EN 61180-2:1994
DIN EN 14462:2015-08 Surface treatment equipment - Noise test code for surface treatment equipment including its ancillary handling equipment - Accuracy grades 2 and 3; German version EN 14462:2015
DIN 51701-4:2006 Testing of solid fuels - Sampling and sample preparation - Part 4: Equipment
DIN VDE 0404-3:2005 Testing and measuring equipment for testing the electrical safety of electrical devices - Part 3: Equipment for periodical tests and tests prior to commissioning medical electrical devices or systems
DIN 51231-1:2001-12 Material testing machines - Testing equipment for structural components - Part 1: Floor slabs
DIN EN 50470-1 Berichtigung 1:2008 Electricity metering equipment (a.c.) - Part 1: General requirements, tests and test conditions - Metering equipment (class indexes A, B and C); German version EN 50470-1:2006, Corrigendum to DIN EN 50470-1 (VDE 0418-0-1):2007-05
DIN 51231-1:1972 Material testing machines - Testing equipment for structural components - Part 1: Floor slabs
DIN 25412-2:2000 Laboratory equipment - Gloves boxes - Part 2: Leakage test
DIN 54190-2:2005 Non-destructive testing - Thermographic testing - Part 2: Equipment
DIN EN 300019-2-7:2004 Equipment Engineering (EE) - Environmental conditions and environmental tests for telecommunications equipment - Part 2-7: Specification of environmental tests; Portable and non-stationary use (Endorsement of the English version EN 300019-2-7 V3.0.0 (2002
DIN EN 62353:2008 Medical electrical equipment - Recurrent test and test after repair of medical electrical equipment (IEC 62353:2007); German version EN 62353:2008
DIN 18871-4:2018 Equipment for commercial kitchens - Thermal equipment - Part 4: Noodle cookers - Requirements and testing
DIN EN 300019-2-8:2000 Equipment Engineering (EE) - Environmental conditions and environmental tests for telecommunications equipment - Part 2-8: Specification of environmental tests; stationary use at underground locations (Endorsement of the English version EN 300019-2-8 V 2.
DIN 6650-5:2002 Beverage dispensing systems - Part 5: Testing requirements
DIN EN 62271-101:2007 High-voltage switchgear and controlgear - Part 101: Synthetic testing (IEC 62271-101:2006); German version EN 62271-101:2006
DIN 18871-1:2004 Equipment for commercial kitchens - Thermal equipment - Part 1: Warming cupboards - Requirements and testing
DIN 9767:1980 Office machines - Duplicating machines, registration, test conditions, test methods, classification
DIN 18861-1:2000 Equipment for commercial kitchens - Dishwashing facilities and sinks - Part 1: Dishwashing facilities; requirements and testing
DIN 54190-2:2011 Non-destructive testing - Thermographic testing - Part 2: Equipment
DIN 25412-2:2015 Laboratory equipment - Glove boxes - Part 2: Leakage test
DIN EN 14154-3:2007 Water meters - Part 3: Test methods and equipment German version EN 14154-3:2005+A1:2007
DIN IEC 60605-3-4:1993 Equipment reliability testing; preferred test conditions; equipment for portable and non-stationary use; low degree of simulation; identical with IEC 60605-3-4:1992
DIN 18134:2001 Soil; Testing procedures and testing equipment - Plate load test
DIN 18134 E:1995-08 Soil; Testing procedures and testing equipment - Plate load test
DIN 18134:2012 Soil - Testing procedures and testing equipment - Plate load test
DIN 58955-3:1998 Decontamination equipment for medical use - Part 3: Efficiency testing
DIN EN 62052-21:2005 Electricity metering equipment (a.c.) - General requirements, tests and test conditions - Part 21: Tariff and load control equipment (IEC 62052-21:2004); German version EN 62052-21:2004
DIN 18134:1993 Soil; Testing procedures and testing equipment - Plate load test
DIN 18861-1 E:2017-08 Equipment for commercial kitchens - Dishwashing facilities and sinks - Part 1: Dishwashing facilities; requirements and testing
DIN EN 60512-11-10:2003 Connectors for electronic equipment - Tests and measurements - Part 11-10: Climatic tests; Test 11j: Cold (IEC 60512-11-10:2002); German version EN 60512-11-10:2002
DIN 9767:1995 Office machines - Duplicating machines, registration, test conditions, test methods, classification
DIN EN 300019-2-0:2004 Equipment Engineering (EE) - Environmental conditions and environmental tests for telecommunications equipment - Part 2-0: Specification of environmental tests; Introduction (Endorsement of the English version EN 300019-2-0 V2.1.2 (2003-05) as German stan
DIN EN 12952-15:2004 Water tube boilers and auxiliary installations - Part 15: Acceptance tests; German version EN 12952-15:2003
DIN 32937:2006 Control of inspection, measuring and test equipment - Plan, manage and use of inspection, measuring and test equipments
DIN IEC 60068-3-3:1993 Environmental testing; seismic test methods for equipments; guidance; identical with IEC 60068-3-3:1991

RU-GOST R

GOST 22782.7-1981 Explosionproof electrical apparatus. Type of protection "e". Technical requirements and methods of testing
GOST R ISO 27327-1-2012 Fans. Air curtain units. Part 1. Laboratory methods of testing for aerodynamic performance rating
GOST 30373-1995 Electromagnet compatibility of technical means. Test equipment. Shielded chambers. Classes, basic parameters, technical requirements and test methods
GOST R 55682.9-2013 Water-tube boilers and auxiliary installations. Part 9. Acceptance tests
GOST IEC 62052-21-2014 Electricity metering equipment (a.c.). General requirements, tests and test conditions. Part 21. Tariff and load control equipment
GOST 28944-1991 Welding mechanical equipment. Test methods
GOST R 55682.15-2013 Water-tube boilers and auxiliary installations. Part 15. Acceptance tests
GOST R 51321.1-2007 Low-voltage switchgear and controlgear assemblies. Part 1. Type-tested and partially type-tested assemblies. General technical requirements and test methods

PL-PKN

PN M47251-1986 Building machinery and e?uipment remissible noise level and test cod?
PN H84035-1972 Alloyed, structural s?eels for super du?y equipment Grades

Standard Association of Australia （SAA）

AS 4362.2:1996(R2015) Low voltage equipment High voltage testing technology testing equipment
AS 4156.7:1999(R2013) Performance evaluation of coal preparation and coal grade classification equipment
IEC 62271-101:2006+AMD1:2010 CSV High-voltage switchgear and controlgear — Part 101: Synthetic testing
AS 1815.2:2007 Metallic materials - Rockwell hardness test - Verification and calibration of testing machine (scales A, B, C, D, E, F, G, H, K, N, T)
AS 3439.1:1993 Low-voltage switchgear and controlgear assemblies Part 1: Type-tested and partially type-tested assemblies
AS 4156.7:1999 Coal preparation - Coal size classifying equipment - Performance evaluation
AS 1939:1986 Classification of degrees of protection provided by enclosures for electrical equipment
AS 1939:1981 Classification of degrees of protection provided by enclosures for electrical equipment
AS 1939:1976 Classification of degrees of protection provided by enclosures for electrical equipment
AS 4156.2.1:1994 Coal preparation, Part 2.1: Higher rank coal - Froth flotation - Basic test

American Society for Testing and Materials (ASTM)

ASTM F2544-11 Standard Test Method for Determining A-Weighted Sound Power Level of Central Vacuum Power Units

Danish Standards Foundation

DS/EN IEC 62052-11:2021 Electricity metering equipment – General requirements, tests and test conditions – Part 11: Metering equipment
DS/ETS 300019-2-0:1994 Equipment Engineering (EE) - Environmental conditions and environmental tests for telecommunications equipment - Part 2-0:Specification of environmental tests - Introduction
DS/ETS 300019-2-2:1994 Equipment Engineering (EE) - Environmental conditions and environmental tests for telecommunications equipment - Part 2-2:Specification of environmental tests - Transportation
DS/ETS 300019-2-1:1994 Equipment Engineering (EE) - Environmental conditions and environmental tests for telecommunications equipment - Part 2-1:Specification of environmental tests - Storage
DS/EN 60512-2-1:2002 Connectors for electronic equipment - Tests and measurements - Part 2-1: Electrical continuity and contact resistance tests - Test 2a: Contact resistance - Millivolt level method
DS/EN IEC 62271-101:2021 High-voltage switchgear and controlgear – Part 101: Synthetic testing
DS/EN 437:1994 Test gasses-Test pressures-Appliance categories
DS/ETS 300019-2-6:1994 Equipment Engineering (EE) - Environmental conditions and environmental tests for telecommunications equipment - Part 2-6:Specification of environmental tests - Ship environments
DS/ETS 300019-2-5:1994 Equipment Engineering (EE) - Environmental conditions and environmental tests for telecommunications equipment - Part 2-5:Specification of environmental tests - Ground vehicle installations

Aeronautical Radio Inc.

ARINC 602A-2 ITEM 4.0 Test Equipment Classification

VDI - Verein Deutscher Ingenieure

VDI/VDE/DGQ 2618 Blatt 19.1-2013 Inspection of measuring and test equipment - Test instruction for special gauges and test equipment
VDI/VDE/DGQ 2618 Blatt 10.6-2008 Pruefmittelueberwachung - Pruefanweisung fuer Hoehenmessschrauben
VDI/VDE/DGQ 2618 Blatt 10.2-2005 Inspection of measuring and test equipment - Test instruction for micrometers for screw thread measurement

European Committee for Electrotechnical Standardization（CENELEC）

EN IEC 62052-11:2021 Electricity metering equipment - General requirements, tests and test conditions - Part 11: Metering equipment
EN 61180-2:1994 High-Voltage Test Techniques for Low-Voltage Equipment - Part 2: Test Equipment
EN 60974-4:2011 Arc welding equipment - Part 4: Periodic inspection and testing
EN 62271-101:2013 High-voltage switchgear and controlgear - Part 101: Synthetic testing
EN 60974-4:2016 Arc welding equipment - Part 4: Periodic inspection and testing
EN 62353:2008 Medical electrical equipment - Recurrent test and test after repair of medical electrical equipment (Remains Current)
HD 323.3.3 S1-1991 Environmental Testing Part 3: Guidance - Seismic Test Methods for Equipments
EN 62052-11:2003 Electricity metering equipment (AC) General requirements, tests and test conditions Part 11: Metering equipment
EN 62353:2014 Medical electrical equipment - Recurrent test and test after repair of medical electrical equipment

SE-SIS

SIS SS 1780-1981 Spray painting equipment — Paint separation test
MNC 301 E-1987 Testing equipment - Verification - Summary
MNC 301-1987 Testing equipment - Verification - Summan/

Association of German Mechanical Engineers

VDI/VDE/DGQ 2618 Blatt 19.1-2014 Inspection of measuring and test equipment - Test instruction for special gauges and test equipment
VDI/VDE/DGQ 2618 Blatt 10.5-2010 Inspection of measuring and test equipment - Test instruction for depth micrometers
VDI/VDE/DGQ 2618 Blatt 10.3-2002 Inspection of measuring and test equipment - Test instructions for micrometers with dial indicator
VDI/VDE/DGQ 2618 Blatt 11.1-2014 Inspection of measuring and test equipment - Test instruction for mechanical dial gauges
VDI/VDE/DGQ 2618 Blatt 3.1-2004 Inspection of measuring and test equipment - Test instruction for gauge blocks

VDE - VDE Verlag GmbH@ Berlin@ Germany

VDE 0432-10-2013 High-voltage test techniques for low-voltage equipment - Definitions@ test and procedure requirements@ test equipment
VDE 0432-10-2017 High-voltage test techniques for low-voltage equipment - Definitions@ test and procedure requirements@ test equipment (IEC 61180:2016); German version EN 61180:2016
VDE 0418-2-11-2003 Electricity metering equipment (AC) - General requirements@ tests and test conditions - Part 11: Metering equipment (IEC 62052-11:2003); German version EN 62052-11:2003
VDE 0418-2-11-2018 Electricity metering equipment - General requirements@ tests and test conditions - Part 11: Metering equipment (IEC 13/1756/CD:2018); Text in German and English
VDE 0404-2-2002 Testing and measuring equipment for checking the electric safety of electric devices - Part 2: Testing equipment for tests after repair@ change or in case of repeat tests

RO-ASRO

STAS SR 11065-1995 Petroleum equipment - Stage cementing equipment
STAS 6588-1962 Trial method for protection levels of electronic equipment

Japanese Industrial Standards Committee (JISC)

JIS Z 2320-3:2007 Non-destructive testing -- Magnetic particle testing -- Part 3: Equipment
JIS C 60068-2-56:1996 Environmental testing Part 2: Tests. Test Cb: Damp heat, steady state, primarily for equipment
JIS C 0920:1993 Tests to prove protection against ingress of water and degrees of protection against ingress of solid objects for electrical equipment
JIS C 0055:2000 Environmental testing -- Part 3: Guidance Seismic test method for equipments
JIS C 60068-3-3:2000 Environmental testing -- Part 3: Guidance Seismic test method for equipments
JIS C 0032:1996 Environmental testing Part 2: Tests. Test Cb: Damp heat, steady state, primarily for equipment
JIS B 6596:1991 Double sizers -- Test and inspection methods
JIS C 5402-14-7:2002 Connectors for electronic equipment -- Tests and measurements -- Part 14-7: Sealing tests -- Test 14g: Impacting water
JIS C 5402-11-8:2002 Connectors for electronic equipment -- Tests and measurements -- Part 11-8: Climatic tests -- Test 11h: Sand and dust
JIS C 5402-11-9:2005 Connectors for electronic equipment -- Tests and measurements -- Part 11-9: Climatic tests -- Test 11i: Dry heat
JIS C 60068-2-31:1995 Environmental testing Part 2: Tests. Test Ec: Drop and topple, primarily for equipment-type specimens
JIS W 0823:1994 Environmental tests for aircraft equipment -- Insulation resistance and high voltage tests for electrical equipment

BSI

DIN EN IEC 62052-11/A12:2024 Electricity metering equipment - General requirements, tests and test conditions - Part 11: Metering equipment; German version EN IEC 62052-11:2021/A12:2024

CEN - European Committee for Standardization

EN ISO 389-9:2009 Acoustics - Reference zero for the calibration of audiometric equipment - Part 9: Preferred test conditions for the determination of reference hearing threshold levels

IN-BIS

IS 2106 Pt.9-1964 Environmental testing of electronic equipment Part IX: Drop test
IS 9002 Pt.5-1979 Specification for Environmental Test Equipment for Electronic and Electrical Projects Part V Vibration (Sine Wave) Test Equipment
IS 2106 Pt.15-1966 Environmental testing of electronic equipment Part ⅩⅤ Air tightness test
IS 2106 Pt.8-1964 Environmental testing of electronic equipment Part 8: Shock or impact testing
IS 2106 Pt.16-1971 Environmental testing of electronic and electrical equipment Part X Vibration test
IS 9002 Pt.13/Sec.3-1985 Specification for Environmental Test Equipment for Electrical and Electronic Products Part 13 Temperature Change Test Equipment Section 3: Two Baths
IS 12063-1987 Classification of protection levels of electrical equipment enclosures

IT-UNI

UNI 5538-1965 Textiles: tests. Test and classification of absorbency.
UNI 2940-1946 Fixed fuel classification for heating equipment

AT-ON

ONORM M 1339-1999 Control of measuring and test equipment - Applicability test of measuring and test equipment

KR-KS

KS C IEC 60974-4-2023 Arc welding equipment — Part 4: Periodic inspection and testing
KS C IEC 60512-2-1-2008 Connectors for electronic equipment－Tests and measurements－Part 2-1：Electrical continuity and contact resistance tests－Test 2a：contact resistance－Millivolt level method
KS C IEC 60736-2003(2023) Electricity meter test equipment
KS B ISO 18471-2022 Agricultural irrigation equipment — Filters — Verification of filtration grade
KS B ISO 5682-1-2018(2023) Equipment for crop protection — Spraying equipment — Part 1: Test methods for sprayer nozzles
KS C IEC 60068-3-3-2020 Environmental testing — Part 3-3: Guidance seismic test methods for equipments
KS C IEC TR 62854-2018(2023) Sharp edge testing apparatus and test procedure for lighting equipment — Tests for sharpness of edge
KS C IEC 62052-21-2017 Electricity metering equipment (a.c.) ― General requirements, tests and test conditions ― Part 21: Tariff and load control equipment

Society of Automotive Engineers (SAE)

SAE ARP1398A-2000 Testing of Oxygen Equipment
SAE J211-2-2001 Instrumentation for Impact Test Part 2 Photographic instrumentation

Malaysia Standards

MS 1445 Pt.1-1998 Low-voltage switchgear and controlgear components: Part 1: Type-tested and partially type-tested components

United States Navy

NAVY UFGS-26 08 00-2008 APPARATUS INSPECTION AND TESTING

CENELEC - European Committee for Electrotechnical Standardization

EN 60974-4:2007 Arc welding equipment - Part 4: In-service inspection and testing
EN 60079-26:2007 Explosive atmospheres - Part 26: Equipment with equipment protection level (EPL) Ga
EN 60068-2-31:1993 Basic Environmental Testing Procedures Part 2: Tests Test Ec: Drop and Topple@ Primarily for Equipment- Type Specimens

IEEE - The Institute of Electrical and Electronics Engineers@ Inc.

IEEE 336-1980 Installation@ Inspection@ and Testing Requirements for Class IE Instrumentation and Electric Equipment at Nuclear Power Generating Stations

Lithuanian Standards Office

LST EN 62271-101-2013 High-voltage switchgear and controlgear -- Part 101: Synthetic testing

Indonesia Standards

SNI IEC 60439-1:2009 Low-voltage switchgear and controlgear assemblies. Part 1: Type-tested and partially type-tested assemblies

CZ-CSN

CSN 34 5613-1970 Test methods for mechanic tests of electrical apparatus
CSN 12 4015-1989 Separation equipment. Acceptance rules and testing methods

Canadian Standards Association (CSA)

CSA/CGA 2.94-M96-1996 Performance Testing and Rating of Gas-Fired, Air Conditioning and Heat Pump Appliances First Edition; CSA/ANSI Z21.40.4-1996

CH-SNV

SEV 3002-1963 VSS equipment testing (ME and CBR)

ETSI - European Telecommunications Standards Institute

PRETS 300 019-2-0-1994 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment Part 2-0: Specification of Environmental Tests Introduction
PRETS 300 019-2-2-1994 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment Part 2-2: Specification of Environmental Tests Transportation
TR 103 538-2019 Environmental Engineering (EE); Analysis of test method and test severity for mechanical test of equipment installed on poles/towers (V1.1.1)
PRETS 300 019-2-1-1994 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment Part 2-1: Specification of Environmental Tests Storage

South African Bureau of Standard

SANS 60439-1:2004 Low-voltage switchgear and controlgear assemblies Part 1: Type-tested and partially type-tested assemblies

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc.

ASHRAE 32.2-2003 Methods of Testing for Rating Pre-Mix and Post-Mix Beverage Dispensing Equipment

TR-TSE

TS 3033-1978 Classification Of Degrees Of Protection Provided By Enclosures (For Electrical Equipment)