plastic material

plastic material, Total:422 items.

The international standard classification for "plastic material" includes: Mechanical testing of metals , Thermoplastic materials , Filters, seals and contamination of fluids , Plastics pipes , Plastics pipes, fittings and valves .

The Chinese standard classification for "plastic material" includes: Metal mechanical property test method , Basic standards and general methods for synthetic resin and plastic , Hydraulic and pneumatic device , Plastic profile .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 24172-2009 Method for evaluation of tensile properties of metallic superplastic materials
GB/T 21283.6-2015 Rotary shaft lip-type seals incorporating thermoplastic sealing elements―Part 6:Properties requirements for the thermoplastic and elastic material
GB/T 9647-2003 Thermoplastics pipes--Determination of ring stiffness
GB/T 10798-2001 Table of universal wall thickness of thermoplastics pipe
GB/T 17037.4-2003 Plastic--Injection moulding of test specimens of thermoplastic materials--Part 4:Determination of moulding shrinkage
GB/T 8802-2001 Thermoplastics pipes and fitting - Determination of vicat softening temperature
GB/T 17037.1-1997 Injection moulding of test specimens of thermoplastic materials - Part 1: General principles and moulding of multipurpose and bar test specimens
GB/T 9647-2015 Thermoplastics pipes―Determination of ring stiffness
GB/T 17037.3-2003 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3: Small plates
GB/T 9352-2008 Plastic - Compression moulding of test specimens of thermoplastic materials
GB/T 10798-2001(XG1-2003) Table of universal wall thickness of thermoplastics pipe

Taiwan Provincial Standard of the People's Republic of China

CNS 7455-1981 Dental Plastic Filling Instruments

Professional Standard - Chemical Industry

HG/T 2361-1992 Polybutylene terephthalate (PBT) thermoplastic material nomenclature

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 39385-2020 Plastics piping and ducting systems—Thermoplastics pipes—Determination of ring flexibility
GB/T 17037.2-2020 Plastics—Injection moulding of test specimens of thermoplastic materials—Part 2:Small tensile bars

British Standards Institution (BSI)

BS EN ISO 293:2006 Plastics - Compression moulding of test specimens of thermoplastic materials
BS EN ISO 16135:2006+A1:2019 Industrial valves. Ball valves of thermoplastics materials
BS EN ISO 16135:2006 Industrial valves - Ball valves of thermoplastic materials
BS EN ISO 16136:2006+A1:2019 Industrial valves. Butterfly valves of thermoplastics materials
BS EN ISO 16139:2006+A1:2019 Industrial valves. Gate valves of thermoplastics materials
BS EN ISO 16136:2006 Industrial valves - Butterfly valves of thermoplastic materials
BS EN ISO 16139:2006 Industrial valves - Gate valves of thermoplastic materials
BS EN ISO 21787:2006+A1:2019 Industrial valves. Globe valves of thermoplastics materials
BS EN ISO 16138:2006 Industrial valves - Diaphragm valves of thermoplastics materials
BS EN ISO 16137:2006 Industrial valves - Check valves of thermoplastic materials
BS EN ISO 294-3:2003 Plastics - Injection moulding of test specimens of thermoplastic materials - Small plates
BS EN ISO 16137:2006+A1:2019 Industrial valves. Check valves of thermoplastics materials
BS EN ISO 293:2023 Plastics. Compression moulding of test specimens of thermoplastic materials
BS EN ISO 21787:2006 Industrial valves - Globe valves of thermoplastics materials
BS EN ISO 306:2022 Plastics. Thermoplastic materials. Determination of Vicat softening temperature (VST)
BS EN ISO 306:2013 Plastics. Thermoplastic materials. Determination of Vicat softening temperature (VST)
BS EN ISO 294-3:2020 Plastics. Injection moulding of test specimens of thermoplastic materials - Small plates
BS EN ISO 15854:2005 Dentistry - Casting and baseplate waxes
18/30382609 DC BS EN 1871. Road marking materials. Paint, thermoplastic and cold plastic materials. Physical properties
BS EN ISO 15854:2021 Dentistry. Casting and baseplate waxes
12/30266874 DC BS EN 1871. Road marking materials. Paint, thermoplastic and cold plastic materials. Specifications
BS ISO 20032:2013 Method for evaluation of tensile properties of metallic superplastic materials
BS ISO 20032:2007 Method for evaluation of tensile properties of metallic superplastic materials
BS CP 312-1:1973 Code of practice for plastics pipework (thermoplastics material) - General principles and choice of material
BS EN ISO 294-2:2018 Plastics. Injection moulding of test specimens of thermoplastic materials. Small tensile bars
22/30445226 DC BS EN ISO 293. Plastics. Compression moulding of test specimens of thermoplastic materials
21/30430498 DC BS EN ISO 306. Plastics. Thermoplastic materials. Determination of Vicat softening temperature (VST)
BS ISO 4065:2018(2020) Thermoplastics pipes — Universal wall thickness table
BS ISO 294-5:2011 Plastics. Injection moulding of test specimens of thermoplastic materials. Preparation of standard specimens for investigating anisotropy
BS EN 60264-4-1:2010 Packaging of winding wires. Methods of test. Delivery spools made from thermoplastic materials
BS EN ISO 294-4:2019 Plastics. Injection moulding of test specimens of thermoplastic materials. Determination of moulding shrinkage
BS EN 60264-4-1:2011 Packaging of winding wires. Methods of test. Delivery spools made from thermoplastic materials

Association Francaise de Normalisation

NF T58-003*NF EN ISO 293:2005 Plastics - Compression moulding of test specimens of thermoplastic materials
NF E29-345*NF EN ISO 16139:2006 Industrial valves - Gate valves of thermoplastic materials
NF E29-342*NF EN ISO 16136:2006 Industrial valves - Butterfly valves of thermoplastic materials
NF EN ISO 16136:2006 Robinetterie industrielle - Robinets à papillon en matériaux thermoplastiques
NF EN ISO 16137:2006 Industrial valves - Non-return valves in thermoplastic materials
NF P98-603*NF EN 1871:2020 Road marking materials - Paint, thermoplastic and cold plastic materials - Physical properties
NF EN ISO 293:2023 Plastiques - Moulage par compression des éprouvettes en matières thermoplastiques
NF E29-343*NF EN ISO 21787:2006 Industrial valves - Globe valves of thermoplastic materials
NF E29-341*NF EN ISO 16138:2006 Industrial valves - Diaphragm valves of thermoplastic materials
NF E29-344*NF EN ISO 16137:2006 Industrial valves - Check valves of thermoplastic materials
NF EN ISO 306:2022 Plastics - Thermoplastic materials - Determination of the Vicat softening temperature (VST)
NF EN ISO 8659:2020 Valves made of thermoplastic materials - Fatigue resistance - Test method
NF EN ISO 16139:2006 Robinetterie industrielle - Robinets-vannes en matériaux thermoplastiques
NF EN ISO 16135:2006 Robinetterie industrielle - Robinets à tournant sphérique en matériaux thermoplastiques
NF S91-261:2005 Dentistry - Casting and baseplate waxes.
NF T51-021:1997 Plastics. Thermoplastic materials. Determination of Vicat softening temperature (VST).
NF EN ISO 21787:2006 Robinetterie industrielle - Robinets à soupapes en matériaux thermoplastiques
NF EN ISO 16136/A1:2019 Robinetterie industrielle - Robinets à papillon en matériaux thermoplastiques - Amendement 1
NF EN ISO 16139/A1:2019 Robinetterie industrielle - Robinets-vannes en matériaux thermoplastiques - Amendement 1
NF EN 28233:1991 Valves made of thermoplastic materials - Operating torque - Test method
NF T51-294-2/A1:2005 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 2 : small tensile bars.
NF T51-294-3*NF EN ISO 294-3:2020 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3 : small plates
NF EN ISO 16137/A1:2019 Industrial valves - Non-return valves in thermoplastic materials - Amendment 1
NF EN ISO 294-3:2020 Plastics - Injection molding of test pieces of thermoplastic materials - Part 3: small plates
NF EN 12118:1997 Plastic piping systems - Coulometric determination of water content in thermoplastic materials
NF T51-294-2*NF EN ISO 294-2:2018 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 2: Small tensile bars
NF UTE C32-023:1993 Caractéristiques physicochimiques des matériaux thermoplastiques après immersion dans les liquides agressifs
UTE C32-023U*UTE C32-023:1993 Physico-chemical characteristics of thermoplastic materials after immersion in agressive liquids.
NF EN ISO 16135/A1:2019 Robinetterie industrielle - Robinets à tournant sphérique en matériaux thermoplastiques - Amendement 1
NF EN ISO 294-2:2018 Plastics - Injection molding of thermoplastic material specimens - Part 2: Small-sized traction bars
NF E29-340/A1*NF EN ISO 16135/A1:2019 Industrial valves - Ball valves of thermoplastics materials - Amendment 1
NF E29-345/A1*NF EN ISO 16139/A1:2019 Industrial valves - Gate valves of thermoplastics materials - Amendment 1
NF EN ISO 16138:2006 Robinetterie industrielle - Robinets à membrane en matériaux thermoplastiques
NF E29-342/A1*NF EN ISO 16136/A1:2019 Industrial valves - Butterfly valves of thermoplastics materials - Amendment 1
NF EN ISO 21787/A1:2019 Robinetterie industrielle - Robinets à soupape en matériaux thermoplastiques - Amendement 1
NF EN ISO 16138/A1:2019 Robinetterie industrielle - Robinets à membrane en matériaux thermoplastiques - Amendement 1
NF E29-343/A1*NF EN ISO 21787/A1:2019 Industrial valves - Globe valves of thermoplastics materials - Amendment 1
NF E29-344/A1*NF EN ISO 16137/A1:2019 Industrial valves - Check valves of thermoplastics materials - Amendment 1
NF E29-341/A1*NF EN ISO 16138/A1:2019 Industrial valves - Diaphragm valves of thermoplastics materials - Amendment 1
NF EN ISO 294-4:2019 Plastics - Injection molding of thermoplastic material specimens - Part 4: determination of molding shrinkage
NF T51-294-4*NF EN ISO 294-4:2019 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4 : determination of moulding shrinkage
NF EN 12573-1:2000 Cuves statiques soudées en matières thermoplastiques sans pression - Partie 1 : principes généraux

Japanese Industrial Standards Committee (JISC)

JIS H 7007:2002 Glossary of terms used in metallic superplastic materials
JIS K 7152:1995 Plastics -- Injection moulding of test specimens of thermoplastic materials
JIS H 7007:1995 Glossary of terms used in metallic superplastic materials
JIS K 7206:1999 Plastics -- Thermoplastic materials -- Determination of Vicat softening temperature (VST)
JIS K 7206:2016 Plastics -- Thermoplastic materials -- Determination of Vicat softening temperature (VST)
JIS K 7151:1995 Plastics -- Compression moulding test specimens of thermoplastic materials
JIS K 7152-3:2006 Plastics -- Injection moulding of test specimens of thermoplastic materials -- Part 3: Small plates
JIS H 7501:2016 Method for evaluation of tensile properties of metallic superplastic materials
JIS H 7501:2002 Method for evaluation of tensile properties of metallic superplastic materials
JIS K 7151 AMD 1:2009 Plastics -- Compression moulding test specimens of thermoplastic materials(Amendment 1)
JIS K 7152-4:2006 Plastics -- Injection moulding of test specimens of thermoplastic materials -- Part 4: Determination of moulding shrinkage
JIS K 7152-4:2001 Plastics -- Injection moulding of test specimens of thermoplastic materials -- Part 4: Determination of moulding shrinkage

RO-ASRO

STAS 6127-1968 plastic. Determination of tear resistance of thermoplastic materials
STAS E 12194-1984 PLASTICS Shrinkage determination of thermoplastic materials used lor injection moulding
STAS 6572-1968 plastic. Samples made of thermoplastic materials. General rules

International Organization for Standardization (ISO)

ISO 293:1986 Plastics; Compression moulding test specimens of thermoplastic materials
ISO 293:2004 Plastics - Compression moulding of test specimens of thermoplastic materials
ISO 293:2023 Plastics — Compression moulding of test specimens of thermoplastic materials
ISO 293:1974 Plastics — Compression moulding test specimens of thermoplastic materials
ISO 1872:1972 Polyethylene thermoplastic materials — Designation
ISO 16136:2006 Industrial valves - Butterfly valves of thermoplastics materials
ISO 16135:2006 Industrial valves - Ball valves of thermoplastics materials
ISO 16139:2006 Industrial valves - Gate valves of thermoplastics materials
ISO 21787:2006 Industrial valves - Globe valves of thermoplastics materials
ISO 16138:2006 Industrial valves - Diaphragm valves of thermoplastics materials
ISO 16137:2006 Industrial valves - Check valves of thermoplastics materials
ISO 306:1994 Plastics - Thermoplastic materials - Determination of Vicat Softening Temperature (VST)
ISO 306:2022 Plastics — Thermoplastic materials — Determination of Vicat softening temperature (VST)
ISO 15854:2005 Dentistry - Casting and baseplate waxes
ISO 15854:2021 Dentistry - Casting and baseplate waxes
ISO 306:2004 Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST)
ISO 306:2013 Plastics.Thermoplastic materials.Determination of Vicat softening temperature (VST)
ISO 294-3:2002 Plastics - Injection moulding of test specimens of thermoplastics materials - Part 3: Small plates
ISO 20032:2007 Method for evaluation of tensile properties of metallic superplastic materials
ISO 20032:2013 Method for evaluation of tensile properties of metallic superplastic materials
ISO 16139:2006/Amd 1:2019 Industrial valves — Gate valves of thermoplastics materials — Amendment 1
ISO 16136:2006/Amd 1:2019 Industrial valves — Butterfly valves of thermoplastics materials — Amendment 1
ISO 16135:2006/Amd 1:2019 Industrial valves — Ball valves of thermoplastics materials — Amendment 1
ISO 294-3:2020 Plastics — Injection moulding of test specimens of thermoplastic materials — Part 3: Small plates
ISO 294-2:1996 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 2: Small tensile bars
ISO 16138:2006/Amd 1:2019 Industrial valves — Diaphragm valves of thermoplastics materials — Amendment 1
ISO 16137:2006/Amd 1:2019 Industrial valves — Check valves of thermoplastics materials — Amendment 1
ISO 21787:2006/Amd 1:2019 Industrial valves — Globe valves of thermoplastics materials — Amendment 1
ISO 294-3:2002/Amd 1:2006 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3: Small plates; Amendment 1
ISO 294-2:2018 Plastics — Injection moulding of test specimens of thermoplastic materials — Part 2: Small tensile bars
ISO 294-2:1996/Amd 1:2004 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 2: Small tensile bars; Amendment 1
ISO 12091:1995 Structured-wall thermoplastics pipes - Oven test
ISO 13966:1998 Thermoplastics pipes and fittings - Nominal ring stiffnesses

Korean Agency for Technology and Standards (KATS)

KS D 0077-2002 Glossary of terms used in metallic superplastic materials
KS D 0077-2022 Glossary of terms used in metallic superplastic materials
KS D 0077-2002(2022) Glossary of terms used in metallic superplastic materials
KS D 0077-2002(2017) Glossary of terms used in metallic superplastic materials
KS M ISO 306-2015(2020) Plastics－Thermoplastic materials－Determination of Vicat softening temperature(VST)
KS M ISO 306-2020 Plastics－Thermoplastic materials－Determination of Vicat softening temperature(VST)
KS D ISO 20032-2013 Method for evaluation of tensile properties of metallic superplastic materials
KS P ISO 15854:2013 Dentistry－Casting and baseplate waxes
KS D ISO 20032:2009 Method for evaluation of tensile properties of metallic superplastic materials
KS D ISO 20032:2013 Method for evaluation of tensile properties of metallic superplastic materials
KS M ISO 9969-2021 Thermoplastics pipes－Determination of ring stiffness
KS M ISO 9967-2021 Thermoplastics pipes－Determination of creep ratio

VDI - Verein Deutscher Ingenieure

VDI 2544-1973 Schrauben aus thermoplastischen Kunststoffen
VDI 2006-1970 Gestalten von Spritzgussteilen aus thermoplastischen Kunststoffen

SE-SIS

SIS SS 16 11 54-1980 Plastics — Injection moulding test specimens of thermoplastic materials
SIS SEN 24 14 10-1960 Power cable, crushing experiment of thermoplastic materials

European Committee for Standardization (CEN)

EN ISO 293:2003 Plastics - Compression moulding test specimens of thermoplastic materials ISO 293: 1986
EN ISO 293:2023 Plastics - Compression moulding of test specimens of thermoplastic materials (ISO 293:2023)
EN ISO 293:2005 Plastics - Compression moulding of test specimens of thermoplastic materials (ISO 293:2004)
EN ISO 16139:2006 Industrial valves - Gate valves of thermoplastics materials
EN ISO 16135:2006 Industrial Valves - Ball Valves of Thermoplastic Materials
EN ISO 16136:2006 Industrial valves Butterfly valves of thermoplastics materials
EN ISO 21787:2006 Industrial valves - Globe valves of thermoplastics materials
EN ISO 16138:2006 Industrial Valves - Diaphragm Valves of Thermoplastic Materials
EN ISO 16137:2006 Industrial valves - Check valves of thermoplastics materials ISO 16137:2006
EN ISO 16136:2006/A1:2019 Industrial valves - Butterfly valves of thermoplastics materials - Amendment 1 (ISO 16136:2006/Amd 1:2019)
EN ISO 16139:2006/A1:2019 Industrial valves - Gate valves of thermoplastics materials - Amendment 1 (ISO 16139:2006/Amd 1:2019)
EN ISO 16135:2006/A1:2019 Industrial valves - Ball valves of thermoplastics materials - Amendment 1 (ISO 16135:2006/Amd 1:2019)
EN ISO 16138:2006/A1:2019 Industrial valves - Diaphragm valves of thermoplastics materials - Amendment 1 (ISO 16138:2006/Amd 1:2019)
EN ISO 294-4:1998 Plastics - Injection Moulding of Test Specimens of Thermoplastic Materials - Part 4: Determination of Moulding Shrinkage ISO 294-4:1997
EN ISO 21787:2006/A1:2019 Industrial valves - Globe valves of thermoplastics materials - Amendment 1 (ISO 21787:2006/Amd 1:2019)
EN ISO 294-4:2003 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4: Determination of moulding shrinkage
EN ISO 9967:1995 Plastics Pipes - Determination of Creep Ratio (ISO 9967 : 1994)
EN ISO 9969:1995 Thermoplastic Pipes - Determination of Ring Stiffness (ISO 9969 : 1994)
EN 13705:2004 Welding of thermoplastics - Machines and equipment for hot gas welding (including extrusion welding)
HD 402 S2-1984 Standard colours for thermoplastic materials used for the insulation for low-frequency cables and wires
EN ISO 294-3:1998 Plastics - Injection Moulding of Test Specimens of Thermoplastic Materials - Part 3: Small Plates ISO 294-3:1996
EN ISO 294-3:2003 Plastics - Injection Moulding of Test Specimens of Thermoplastic Materials - Part 3: Small Plates ISO 294-3: 2002
EN ISO 294-3:2020 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3: Small plates (ISO 294-3:2020)
EN ISO 16137:2006/A1:2019 Industrial valves - Check valves of thermoplastics materials - Amendment 1 (ISO 16137:2006/Amd 1:2019)

SCC

DANSK DS/ISO 293:2023 Plastics – Compression moulding of test specimens of thermoplastic materials
DANSK DS/EN ISO 16136:2006 Industrial valves - Butterfly valves of thermoplastics materials
DANSK DS/EN ISO 16135:2006 Industrial valves - Ball valves of thermoplastics materials
DANSK DS/EN ISO 16139:2006 Industrial valves - Gate valves of thermoplastics materials
DANSK DS/EN ISO 16138/A1:2006 Industrial valves - Diaphragm valves of thermoplastics materials
DANSK DS/EN ISO 16138:2006 Industrial valves - Diaphragm valves of thermoplastics materials
DANSK DS/EN ISO 293:2005 Plastics – Compression moulding of test specimens of thermoplastic materials
DANSK DS/EN ISO 21787/A1:2006 Industrial valves - Globe valves of thermoplastics materials
DANSK DS/EN ISO 21787:2006 Industrial valves - Globe valves of thermoplastics materials
DANSK DS/EN ISO 16137:2006 Industrial valves - Check valves of thermoplastics materials
BS EN ISO 293:2003 Plastics. Compression moulding test specimens of thermoplastic materials
DANSK DS/EN ISO 16137/A1:2006 Industrial valves - Check valves of thermoplastics materials
BS EN ISO 293:2005 Plastics. Compression moulding of test specimens of thermoplastic materials
NS-EN 1871:2020 Road marking materials — Paint, thermoplastic and cold plastic materials — Physical properties
BS EN ISO 306:2004 Plastics. Thermoplastic materials. Determination of Vicat softening temperature (VST)
NS-EN ISO 293:2023 Plastics — Compression moulding of test specimens of thermoplastic materials (ISO 293:2023)
DANSK DS/EN ISO 306:2013 Plastics – Thermoplastic materials – Determination of Vicat softening temperature (VST)
BS EN ISO 306:1997 Plastics. Thermoplastic materials. Determination of Vicat softening temperature (VST)
NS-EN ISO 293:2005 Plastics — Compression moulding of test specimens of thermoplastic materials (ISO 293:2004)
ASME NM.3.1-2018 Nonmetallic Materials, Part 1 - Thermoplastic Material Specifications
BS 5955-7:1983 Plastics pipework (thermoplastics materials)-Recommendations for methods of thermal fusion jointing
DANSK DS/ISO 306:2022 Plastics – Thermoplastic materials – Determination of Vicat softening temperature (VST)
BS 3262-2:1960 Road marking materials. Hot applied thermoplastic materials (inset type)
NS-EN ISO 16135:2006 Industrial valves - Ball valves of thermoplastics materials (ISO 16135:2006)
AENOR UNE-EN ISO 16136:2007 Industrial valves - Butterfly valves of thermoplastics materials (ISO 16136:2006)
AENOR UNE-EN ISO 16135:2007 Industrial valves - Ball valves of thermoplastics materials (ISO 16135:2006)
BS 3262-1:1960 Road marking materials. Hot-applied thermoplastic materials (superimposed type)
NS-EN ISO 16136:2006 Industrial valves - Butterfly valves of thermoplastics materials (ISO 16136:2006)
NS-EN ISO 16139:2006 Industrial valves - Gate valves of thermoplastics materials (ISO 16139:2006)
BS EN ISO 294-3:1998 Plastics. Injection moulding of test specimens of thermoplastic materials-Small plates
AENOR UNE-EN ISO 16139:2007 Industrial valves - Gate valves of thermoplastics materials (ISO 16139:2006)
NS-EN ISO 293:2003 Plastics — Compression moulding test specimens of thermoplastic materials (ISO 293:1986)
NS-EN ISO 21787:2006 Industrial valves - Globe valves of thermoplastics materials (ISO 21787:2006)
AENOR UNE-EN ISO 16137:2007 Industrial valves - Check valves of thermoplastics materials (ISO 16137:2006)
AENOR UNE-EN ISO 293:2006 Plastics - Compression molding of test specimens of thermoplastic materials (ISO 293:2004)
NS-EN ISO 16137:2006 Industrial valves - Check valves of thermoplastics materials (ISO 16137:2006)
AENOR UNE-EN ISO 21787:2007 Industrial valves - Globe valves of thermoplastics materials (ISO 21787:2006)
NS-EN ISO 16138:2006 Industrial valves - Diaphragm valves of thermoplastics materials (ISO 16138:2006)
AENOR UNE-EN ISO 16138:2007 Industrial valves - Diaphragm valves of thermoplastics materials (ISO 16138:2006)
NS-EN ISO 306:2022 Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST) (ISO 306:2022)
NS-EN ISO 306:2004 Plastics — Thermoplastic materials — Determination of Vicat softening temperature (VST) (ISO 306:2004)
AENOR UNE-EN ISO 306:2015 Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST) (ISO 306:2013)
AENOR UNE-EN ISO 9969:2016 Thermoplastic material tubes. Determination of annular stiffness. (ISO 9969:2016).
DIN EN ISO 293 E:2022 Draft Document - Plastics - Compression moulding of test specimens of thermoplastic materials (ISO/DIS 293:2022); German and English version prEN ISO 293:2022
NS-EN ISO 306:2013 Plastics — Thermoplastic materials — Determination of Vicat softening temperature (VST) (ISO 306:2013)
NS-EN ISO 306:1996 Plastics — Thermoplastic materials — Determination of Vicat softening temperature (VST) (ISO 306:1994)
12/30237820 DC BS EN ISO 306. Plastics. Thermoplastic materials. Determination of Vicat softening temperature (VST)
AENOR UNE-EN ISO 9967:2016 Thermoplastic material tubes. Determination of the creep coefficient. (ISO 9967:2016).
06/30129315 DC ISO 20032. Method for evaluation of tensile properties of metallic super plastic materials
BS EN ISO 294-4:1998 Plastics. Injection moulding of test specimens of thermoplastic materials-Determination of moulding shrinkage
DANSK DS/ISO 294-3:2020 Plastics – Injection moulding of test specimens of thermoplastic materials – Part 3: Small plates
NS-EN ISO 294-3:1998 Plastics — Injection moulding of test specimens of thermoplastic materials — Part 3: Small plates (ISO 294-3:1996)
DANSK DS/ISO 4065:2018 Thermoplastics pipes – Universal wall thickness table
DANSK DS/EN ISO 294-3:2020 Plastics – Injection moulding of test specimens of thermoplastic materials – Part 3: Small plates (ISO 294-3:2020)
NS-EN ISO 294-3:2003 Plastics — Injection moulding of test specimens of thermoplastic materials — Part 3: Small plates (ISO 294-3:2002)
DIN EN ISO 306 E:2012 Draft Document - Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST) (ISO/DIS 306:2011); German version prEN ISO 306:2011
DANSK DS/ISO 15853:2000 Thermoplastics materials - Preparation of tubular test pieces for the determination of the hydrostatic strength of materials used for injection moulding
BS 2782-11 METHOD 1104A:1983 Methods of testing plastics. Thermoplastics pipes, fittings and valves-Measurement of opacity of thermoplastics pipes and fittings
AENOR UNE 53293 IN:1981 PLASTICS. AMORPHOUS THERMOPLASTIC MATERIALS. PREPARATION OF SPECIMENS WITH A DEFINED LEVEL OF SHRINKAGE
DANSK DS/EN ISO 9969:2016 Thermoplastics pipes - Determination of ring stiffness
BS 2782-9 METHOD 901A:1977 Methods of testing plastics. Sampling and test specimen preparation-Compression moulding test specimens of thermoplastic materials
DANSK DS/EN ISO 294-2:2019 Plastics – Injection moulding of test specimens of thermoplastic materials – Part 2: Small tensile bars (ISO 294-2:2018)
NS-EN ISO 294-3:2020 Plastics — Injection moulding of test specimens of thermoplastic materials — Part 3: Small plates (ISO 294-3:2020)
BS 2782-9 METHOD 910A:1977 Methods of testing plastics. Sampling and test specimen preparation-Injection moulding test specimens of thermoplastic materials
BS 2782-9 METHOD 910A:1996 Methods of testing plastics. Sampling and test specimen preparation-Injection moulding test specimens of thermoplastic materials
AENOR UNE-EN 14680:2016 Adhesives for channeling systems in thermoplastic materials without pressure. Specifications.
BS CP 312-3:1973 Code of practice for plastics pipework (thermoplastics material)-Polyethylene pipes for the conveyance of liquids under pressure
NS-EN ISO 294-2:1998 Plastics — Injection moulding of test specimens of thermoplastic materials — Part 2: Small tensile bars (ISO 294-2:1996)
ASME NM.3.2-2018 Nonmetallic Materials, Part 2 - Reinforced Thermoset Plastic Material Specifications
AENOR UNE-EN ISO 13264:2018 Channeling systems in thermoplastic materials for evacuation and buried sanitation without pressure. Accessories in thermoplastic materials. Test method for mechanical resistance or flexibility of manufactured accessories. (ISO 13264:2010...
ISO 294-2:1996/DAmd 1 Plastics — Injection moulding of test specimens of thermoplastic materials — Part 2: Small tensile bars — Amendment 1
DANSK DS/EN ISO 294-4/AC:2011 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4: Determination of moulding shrinkage
DANSK DS/EN ISO 16139/A1:2019 Industrial valves – Gate valves of thermoplastics materials – Amendment 1 (ISO 16139:2006/Amd 1:2019)
NS-EN ISO 294-2:2018 Plastics — Injection moulding of test specimens of thermoplastic materials — Part 2: Small tensile bars (ISO 294-2:2018)
AENOR UNE-EN ISO 294-3:2003 Plastics - Injection molding of test specimens of thermoplastic materials - Part 3: Small plates (ISO 294-3:2002)
DANSK DS/EN ISO 16136/A1:2019 Industrial valves – Butterfly valves of thermoplastics materials – Amendment 1 (ISO 16136:2006/Amd 1:2019)

GSO

BH GSO ISO 16136:2016 Industrial valves - Butterfly valves of thermoplastics materials
BH GSO ISO 16135:2016 Industrial valves -- Ball valves of thermoplastics materials
OS GSO ISO 16139:2013 Industrial valves - Gate valves of thermoplastics materials
OS GSO ISO 21787:2013 Industrial valves - Globe valves of thermoplastics materials
BH GSO ISO 16137:2016 Industrial valves - Check valves of thermoplastics materials
BH GSO ISO 21787:2016 Industrial valves - Globe valves of thermoplastics materials
BH GSO ISO 16138:2016 Industrial valves - Diaphragm valves of thermoplastics materials
BH GSO ISO 293:2015 Plastics – compression moulding of test specimens of thermoplastic materials
OS GSO ISO 16138:2013 Industrial valves - Diaphragm valves of thermoplastics materials
GSO ISO 306:2015 Plastics -- Thermoplastic materials -- Determination of Vicat softening temperature (VST)
OS GSO ISO 306:2015 Plastics -- Thermoplastic materials -- Determination of Vicat softening temperature (VST)
OS GSO ISO 20032:2013 Method for evaluation of tensile properties of metallic superplastic materials
BH GSO ISO 20032:2016 Method for evaluation of tensile properties of metallic superplastic materials
GSO ISO 16135:2014 Industrial valves -- Ball valves of thermoplastics materials
GSO ISO 293:2014 Plastics – compression moulding of test specimens of thermoplastic materials
GSO ISO 16138:2013 Industrial valves - Diaphragm valves of thermoplastics materials
GSO ISO 21787:2013 Industrial valves - Globe valves of thermoplastics materials
GSO ISO 16136:2013 Industrial valves - Butterfly valves of thermoplastics materials
GSO ISO 16137:2013 Industrial valves - Check valves of thermoplastics materials
GSO ISO 16139:2013 Industrial valves - Gate valves of thermoplastics materials
GSO ISO 4899:2013 Textile-glass-reinforced thermosetting plastics - Properties and test methods
OS GSO ISO 4065:2008 Thermoplastics pipes -- Universal wall thickness table
GSO ISO 9969:2013 Thermoplastics pipes - Determination of ring stiffness
GSO ISO 9967:2013 Thermoplastics pipes - Determination of creep ratio
OS GSO ISO 9967:2013 Thermoplastics pipes - Determination of creep ratio
GSO ISO 3994:2015 Plastics hoses -- Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials -- Specification
BH GSO ISO 294-4:2022 Plastics — Injection moulding of test specimens of thermoplastic materials — Part 4: Determination of moulding shrinkage
GSO ISO 294-4:2021 Plastics — Injection moulding of test specimens of thermoplastic materials — Part 4: Determination of moulding shrinkage
GSO ISO 15853:2008 Thermoplastics materials – Preparation of tubular test pieces for the determination of the hydrostatic strength of materials used for injection moulding
GSO ISO 814:2015 Rubber, vulcanized or thermoplastic -- Determination of adhesion to metal -- Two-plate method

German Institute for Standardization

DIN EN ISO 16139:2006 Industrial valves - Gate valves of thermoplastics materials (ISO 16139:2006); English version of DIN EN ISO 16139:2006-06
DIN EN ISO 16139:2019-12 Industrial valves - Gate valves of thermoplastics materials (ISO 16139:2006 + Amd 1:2019); German version EN ISO 16139:2006 + A1:2019
DIN EN ISO 16136:2006 Industrial valves - Butterfly valves of thermoplastics materials (ISO 16136:2006); English version of DIN EN ISO 16136:2006-06
DIN EN ISO 293:2005 Plastics - Compression moulding of test specimens of thermoplastic materials (ISO 293:2004); English version of DIN EN ISO 293
DIN EN ISO 16138:2006 Industrial valves - Diaphragm valves of thermoplastics materials (ISO 16138:2006); English version of DIN EN ISO 16138:2006-06
DIN EN ISO 16136:2019-12 Industrial valves - Butterfly valves of thermoplastics materials (ISO 16136:2006 + Amd 1:2019); German version EN ISO 16136:2006 + A1:2019
DIN EN ISO 16135:2019-12 Industrial valves - Ball valves of thermoplastics materials (ISO 16135:2006 + Amd 1:2019); German version EN ISO 16135:2006 + A1:2019
DIN EN ISO 16138:2019-12 Industrial valves - Diaphragm valves of thermoplastics materials (ISO 16138:2006 + Amd 1:2019); German version EN ISO 16138:2006 + A1:2019
DIN EN ISO 293:2023-06 Plastics - Compression moulding of test specimens of thermoplastic materials (ISO 293:2023); German version EN ISO 293:2023
DIN EN ISO 293:2003 Plastics — Compression molding test specimens of thermoplastic materials
DIN EN ISO 16137:2006 Industrial valves - Check valves of thermoplastics materials (ISO 16137:2006); English version of DIN EN ISO 16137:2006-06
DIN EN ISO 16137:2019-12 Industrial valves - Check valves of thermoplastics materials (ISO 16137:2006 + Amd 1:2019); German version EN ISO 16137:2006 + A1:2019
DIN EN ISO 16135:2006 Industrial valves - Ball valves of thermoplastics materials (ISO 16135:2006); English version of DIN EN ISO 16135:2006-06
DIN EN ISO 21787:2019-12 Industrial valves - Globe valves of thermoplastics materials (ISO 21787:2006 + Amd 1:2019); German version EN ISO 21787:2006 + A1:2019
DIN EN ISO 21787:2006 Industrial valves - Globe valves of thermoplastics materials (ISO 21787:2006); English version of DIN EN ISO 21787:2006-06
DIN EN 1871 E:2018-12 Road marking materials - Paint, thermoplastic and cold plastic materials - Physical properties
DIN EN 1871 E:2008-09 Road marking materials - Paint, thermoplastic and cold plastic materials - Physical properties
DIN EN ISO 294-3:2003 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3: Small plates (ISO 294-3:2002); German version EN ISO 294-3:2003
DIN EN ISO 16135 Berichtigung 1:2008 Industrial valves - Ball valves of thermoplastics materials (ISO 16135:2006); German version EN ISO 16135:2006, Corrigenda to DIN EN ISO 16135:2006-06
DIN EN 1871:2020 Road marking materials - Paint, thermoplastic and cold plastic materials - Physical properties; German version EN 1871:2020
DIN EN ISO 293:2023 Plastics - Compression moulding of test specimens of thermoplastic materials (ISO 293:2023)
DIN EN ISO 306:2023-03 Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST) (ISO 306:2022); German version EN ISO 306:2022
DIN EN ISO 306:2023 Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST) (ISO 306:2022)
DIN EN ISO 294-2:2006 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 2: Small tensile bars (ISO 294-2:1996 + Amd.1:2004); English version of DIN EN ISO 294-2:2006-05
DIN EN ISO 294-3 E:2018-11 Injection molding of specimens of plastic thermoplastic materials Part 3: Small plates (draft)
DIN EN ISO 16138 Berichtigung 1:2008 Industrial valves - Diaphragm valves of thermoplastics materials (ISO 16138:2006); German version EN ISO 16138:2006, Corrigenda to DIN EN ISO 16138:2006-06
DIN EN ISO 294-2:1998 Plastics — Injection molding of test specimens of thermoplastic materials — Part 2: Small tensile bars
DIN EN ISO 294-3:2020-11 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3: Small plates (ISO 294-3:2020); German version EN ISO 294-3:2020
DIN EN ISO 294-2 E:2018-10 Injection molding of plastic thermoplastic material specimens Part 2: Small tensile bars (draft)
DIN EN ISO 294-2:2019-03 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 2: Small tensile bars (ISO 294-2:2018); German version EN ISO 294-2:2018
DIN EN 13705:2004 Welding of thermoplastics - Machines and equipment for hot gas welding (including extrusion welding); German version EN 13705:2004
DIN EN ISO 9967:2016-07 Thermoplastics pipes - Determination of creep ratio (ISO 9967:2016); German version EN ISO 9967:2016
DIN 16839:2010-12 Thermoplastics materials for fittings - Polysulfone (PSU) - General quality requirements and testing; Text in German and English
DIN 16780-1:1988 Plastic moulding materials; thermoplastic moulding materials of polymeric blends; classification and designation
DIN EN ISO 293:2023-10 Plastics - Compression moulding of test specimens of thermoplastic materials (ISO 293:2023); German version EN ISO 293:2023
DIN EN ISO 294-2:2019 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 2: Small tensile bars (ISO 294-2:2018)
DIN 16838:2010-12 Thermoplastics materials for fittings - Polyphenylene sulfone (PPSU) - General quality requirements and testing; Text in German and English

CZ-CSN

CSN ISO 293:1992 Plastics. Compresion moulding test specimens of thermoplastic materials
CSN EN 23994-1995 Plastics products.Hose of polymer reinforced thermoplastics for suction and discharge(ISO 3994:1977)

Danish Standards Foundation

DS/EN ISO 293:2005 Plastics - Compression moulding of test specimens of thermoplastic materials
DS/EN ISO 306:2004 Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST)
DS/EN ISO 16136:2006 Industrial valves – Butterfly valves of thermoplastics materials
DS/EN ISO 16139:2006 Industrial valves – Gate valves of thermoplastics materials
DS/EN ISO 21787:2006 Industrial valves – Globe valves of thermoplastics materials
DS/EN ISO 16137:2006 Industrial valves – Check valves of thermoplastics materials
DS/EN ISO 294-3:2003 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3: Small plates
DS/EN ISO 16138:2006 Industrial valves - Diaphragm valves of thermoplastics materials
DS/EN ISO 294-2/A1:2005 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 2: Small tensile bars
DS/EN ISO 294-2:1999 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 2: Small tensile bars.
DS/EN ISO 9967:2008 Thermoplastics pipes - Determination of creep ratio
DS/EN ISO 9969:2008 Thermoplastics pipes - Determination of ring stiffness
DS/EN ISO 294-4:2003 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4: Determination of moulding shrinkage

Spanish Association for Standardization (UNE)

UNE 53-193-1985 Determination of resistance ability of rigid-plastic materials
UNE-EN ISO 306:2023 Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST) (ISO 306:2022)
UNE-EN ISO 293:2006 Plastics - Compression moulding of test specimens of thermoplastic materials (ISO 293:2004)
UNE-EN ISO 16139:2007 Industrial valves - Gate valves of thermoplastics materials (ISO 16139:2006)
UNE-EN ISO 16135:2007 Industrial valves - Ball valves of thermoplastics materials (ISO 16135:2006)
UNE-EN ISO 294-3:2021 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3: Small plates (ISO 294-3:2020)
UNE-EN ISO 16137:2007 Industrial valves - Check valves of thermoplastics materials (ISO 16137:2006)
UNE-EN ISO 16139:2007/A1:2021 Industrial valves - Gate valves of thermoplastics materials - Amendment 1 (ISO 16139:2006/Amd 1:2019)
UNE-EN ISO 293:2023 Plastics - Compression moulding of test specimens of thermoplastic materials (ISO 293:2023)
UNE-EN ISO 16136:2007/A1:2021 Industrial valves - Butterfly valves of thermoplastics materials - Amendment 1 (ISO 16136:2006/Amd 1:2019)
UNE-EN ISO 21787:2007 Industrial valves - Globe valves of thermoplastics materials (ISO 21787:2006)
UNE-EN ISO 16135:2007/A1:2021 Industrial valves - Ball valves of thermoplastics materials - Amendment 1 (ISO 16135:2006/Amd 1:2019)
UNE-EN ISO 306:2005 Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST) (ISO 306:2004)
UNE-EN ISO 16138:2007/A1:2021 Industrial valves - Diaphragm valves of thermoplastics materials - Amendment 1 (ISO 16138:2006/Amd 1:2019)
UNE-EN ISO 306:2015 Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST) (ISO 306:2013)
UNE-EN ISO 21787:2007/A1:2021 Industrial valves - Globe valves of thermoplastics materials - Amendment 1 (ISO 21787:2006/Amd 1:2019)
UNE-EN ISO 16137:2007/A1:2021 Industrial valves - Check valves of thermoplastics materials - Amendment 1 (ISO 16137:2006/Amd 1:2019)
UNE-EN ISO 16136:2007 Industrial valves - Butterfly valves of thermoplastics materials (ISO 16136:2006)
UNE-EN ISO 16138:2007 Industrial valves - Diaphragm valves of thermoplastics materials (ISO 16138:2006)
UNE-EN ISO 294-3:2003 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3: Small plates (ISO 294-3:2002)

PL-PKN

PN C89012-1988 Plastics Recommended practice for injection moulding test specirnens of thermoplastic materials
PN C89024-1993 Plastics. Thermoplastic materials. Determination of Vicat softening temperature
PN-EN ISO 294-3-2021-01 E Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3: Small plates (ISO 294-3:2020)

(U.S.) Ford Automotive Standards

FORD WD 954-2009 Material and Performance Requirements for Screws Used in Thermoplastics Materials
FORD WD954-2003 MATERIAL AND PERFORMANCE REQUIREMENTS FOR SCREWS USED IN THERMOPLASTIC MATERIALS

American National Standards Institute （ANSI)

ANSI/ASME NM.3.1-2020 Nonmetallic Materials Part 1 - Thermoplastic Material Specifications
ASME NM.3.1-2022 Nonmetallic Materials Part 1 - Thermoplastic Material Specifications
ASME NM.3.2-2022 Nonmetallic Materials Part 2 - Reinforced Thermoset Plastic Material Specifications
ANSI/ASME NM.3.2-2020 Nonmetallic Materials Part 2 - Reinforced Thermoset Plastic Material Specifications

TR-TSE

TS 1800-1975 POLYETHYLENE THERMOPLASTIC MATERIALS — DESIGNATION —

American Society of Mechanical Engineers (ASME)

ASME NM.3.1-2020 Nonmetallic Materials Part 1 - Thermoplastic Material Specifications
ASME NM.3.2-2020 Nonmetallic Materials Part 2 - Reinforced Thermoset Plastic Material Specifications

CH-SNV

VSM 33713.2-1972 Aluminum and aluminum alloys. Plastic materials. Extruded profile modeling
SN ISO 3210:1986 Anodizing of aluminium and its alloys — Assessment of quality of sealed anodic oxide coatingsby measurement of the loss of mass after immersion in phosphoric-chromic acid Solution
SN EN ISO 294-3:2020 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3: Small plates (ISO 294-3:2020)

South African Bureau of Standard

SANS 15854:2008 Dentistry - Casting and baseplate waxes

Indonesia Standards

SNI ISO 306:2011 Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST)

Lithuanian Standards Office

LST EN ISO 293:2005 Plastics - Compression moulding of test specimens of thermoplastic materials (ISO 293:2004)
LST EN ISO 16135:2006 Industrial valves - Ball valves of thermoplastics materials (ISO 16135:2006)
LST EN ISO 16139:2006 Industrial valves - Gate valves of thermoplastics materials (ISO 16139:2006)
LST EN ISO 21787:2006 Industrial valves - Globe valves of thermoplastics materials (ISO 21787:2006)
LST EN ISO 16137:2006 Industrial valves - Check valves of thermoplastics materials (ISO 16137:2006)
LST EN ISO 306:2004 Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST) (ISO 306:2004)
LST EN ISO 16136:2006 Industrial valves - Butterfly valves of thermoplastics materials (ISO 16136:2006)
LST EN ISO 16138:2006 Industrial valves - Diaphragm valves of thermoplastics materials (ISO 16138:2006)
LST EN ISO 294-3:2003 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3: Small plates (ISO 294-3:2002)
LST EN ISO 294-2:2000 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 2: Small tensile bars (ISO 294-2:1996)

BELST

STB 1064-97 Floor tiles from thermoplastic material. Composites. Specifications
STB 1065-97 Roof tile from thermoplastic material composites. Specifications

KR-KS

KS D ISO 20032-2009 Method for evaluation of tensile properties of metallic superplastic materials

DIN

DIN 16980:1987 Thermoplastics rods; dimensions

CU-NC

NC 30-61-1987 Plastics. Compression Moulding of Thermoplastic Materials. General Requirements

RU-GOST R

GOST R 57222-2016 Plastics. Methods for the preparation of samples for biodegradation testing of plastic materials
GOST ISO 12162-2017 Thermoplastic materials for pipes and fittings for pressure applications. Classification, designation and design coefficient

Standard Association of Australia （SAA）

AS 1368:1973 Method for the determination of the Vicat softening point of thermoplastic materials
ISO 16139:2006/Amd.1:2019 Industrial valves — Gate valves of thermoplastics materials AMENDMENT 1
ISO 16136:2006/Amd.1:2019 Industrial valves — Butterfly valves of thermoplastics materials AMENDMENT 1
ISO 16135:2006/Amd.1:2019 Industrial valves — Ball valves of thermoplastics materials AMENDMENT 1
ISO 16138:2006/Amd.1:2019 Industrial valves — Diaphragm valves of thermoplastics materials AMENDMENT 1
ISO 16137:2006/Amd.1:2019 Industrial valves — Check valves of thermoplastics materials AMENDMENT 1
ISO 21787:2006/Amd.1:2019 Industrial valves — Globe valves of thermoplastics materials AMENDMENT 1

AIA/NAS - Aerospace Industries Association of America Inc.

NAS279-1947 Tubing Fabricated from Thermoplastic Materials@ Specification for (Rev 1)

GOST

GOST R 70236-2022 Pipeline valves. Globe valves of thermoplastic materials. General specifications

Association of German Mechanical Engineers

DVS 2225-5-2010 Welding of thermoplastic sealing membranes in tunnel construction
DVS 2215-1-1991 Welding of heating elements for molded parts made of thermoplastic materials in series production
DVS 2215-1-1989 Welding of heating elements for molded parts made of thermoplastic materials in series production
DVS 2215-1-2009 Welding of heating elements for molded parts made of thermoplastic materials in series production

Aerospace Industries Association

AIA NAS 279-1947 (Inactive)Tubing Fabricated from Thermoplastic Materials, Specification for (Rev. 1)

AT-ON

ONORM EN 23994-1993 Plastics products - Hose of polymer reinforced thermoplastics for suction and discharge (ISO 3994:1977)
ONORM IEC 264-4-1:1992 Packaging of winding wires - Methods of test - Plastic delivery spools made from thermoplastic material Conditionnement des fils de bobinage - Methodes d'essai - Bobines de livraison plastiques, faites de materiaux thermoplastique
OENORM EN ISO 294-3:2020 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3: Small plates (ISO 294-3:2020)
ONORM E 6672-1987 Plugs and socket-outlets for industrial purposes; gauges for checking rigidity of enclosures of thermoplastic material

American Society for Testing and Materials (ASTM)

ASTM D4703-10 Standard Practice for Compression Molding Thermoplastic Materials into Test Specimens, Plaques, or Sheets
ASTM D4703-07 Standard Practice for Compression Molding Thermoplastic Materials into Test Specimens, Plaques, or Sheets
ASTM D5939-96 Standard Test Method for Injection Moulding of Test Specimens of Thermoplatic Materials

CEN - European Committee for Standardization

EN ISO 294-4:2019 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4: Determination of moulding shrinkage
EN ISO 9969:2007 Thermoplastics pipes - Determination of ring stiffness
EN ISO 9967:2007 Thermoplastics pipes - Determination of creep ratio

GOSTR

GOST 34288-2017 Pipeline valves. Butterfly valves of thermoplastics materials. General specifications
GOST 34289-2017 Pipeline valves. Gate valves of thermoplastics materials. General specifications
GOST 34290-2017 Pipeline valves. Diaphragm valves of thermoplastics materials. General specifications
GOST 34292-2017 Pipeline valves. Ball valves of thermoplastics materials. General specifications

AR-IRAM

IRAM 13 304-1962 Recommended method for compression molding of test tubes from thermoplastic materials

DE-VDA

VDA 232-201-2009 Thermoplastic material selection parameters for interior, engine compartment and exterior
VDA 232-201-2013 Data for selection of thermoplastic materials used in interior, exterior and engine compartment

CO-ICONTEC

ICONTEC 1332-1981 Electronics. Unipolar conductors insulated by thermoplastic material PVC, special type

International Electrotechnical Commission (IEC)

IEC 60264-4-1:2009 Packaging of winding wires - Part 4-1: Methods of test - Delivery spools made from thermoplastic materials