polyacrylamide plastic

polyacrylamide plastic, Total:95 items.

The international standard classification for "polyacrylamide plastic" includes: Plastics , Chemicals for purification of water , Organic nitrogen compounds , Thermoplastic materials , Products of the chemical industry , Extraction and processing of petroleum and natural gas , Other products of the chemical industry .

The Chinese standard classification for "polyacrylamide plastic" includes: Basic standards and general methods for synthetic resin and plastic , Synthetic resin and plastic , Water treatment agent , General organic chemicals , Petroleum drilling .

---

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

• GB/T 12005.1-1989 Determination for limiting viscosity number of polyacrylamide
• GB/T 12005.6-1989 Determination for hydrolysis degree of partly hydrolysis polyacrylamide
• GB 12005.2-1989 Polyacrylamide solid content determination method
• GB/T 13940-1992 GB/T 13940-1992Polyacrylamide
• GB 12005.1-1989 Determination for limiting viscosity number of polyacrylamide
• GB 17514-2008 Water treatment chemicals.Polyacrylamide
• GB/T 12005.8-1989 Determination for dissolving velocity of powder polyacrylamide
• GB/T 12005.9-1992 of polyacrylamide
• GB 17514-1998 Water treatment chemicals--Polyacrylamide
• GB 12005.6-1989 Method for Determination of Degree of Hydrolysis of Partially Hydrolyzed Polyacrylamide
• GB/T 25277-2010 Plastics - Determination of phenolic antioxidants and erucamide slip additives in polypropylene homopolymer formulations - liquid chromatography (LC)
• GB/T 12005.5-1989 Determination for residual acrylamide content of polyacrylamide--Gas chromatograghy
• GB/T 24769-2009 Acrylamide for industrial use
• GB/T 12005.7-1989 Determination for particle size of powder polyacrylamide
• GB/T 12005.4-1989 Determination for residual acrylamide of polyacrylamide-Liguid chromatography
• GB/T 12005.10-1992 for molecular weight of polyacrylamide by viscometry
• GB 12005.9-1992 Polyacrylamide nomenclature
• GB/T 12005.3-1989 Determination for residual acrylamide of polyacrylamide--Bromating method
• GB/T 12005.2-1989 Determination for solid content of polyacrylamide
• GB/T 22312-2008 Plastics - Polyacrylamide - Determination for residual acrylamide
• GB 12005.7-1989 Method for Determination of Particle Size of Powdered Polyacrylamide
• GB 12005.8-1989 Method for Determination of Dissolution Rate of Powdered Polyacrylamide

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

• GB/T 17514-2008 Water treatment chemicals - Polyacrylamide

Professional Standard - Petroleum

• SY/T 5946-2002 Potassium polyacrylamide for drilling fluid
• SY/T 5862-1993 Determination of properties of acrylamide polymers for oil displacement
• SY/T 6006-1994 Purchasing regulations for polyacrylamide used in well killing fluid
• SY 5946-2002 Polyacrylamide Potassium Salt for Drilling Fluid

工业和信息化部

• HG/T 5568-2019 Water treatment chemicals-Emulsion cationic polyacrylamides
• HG/T 5875-2021 Polyacrylamide polymer mud for pile foundation
• QB/T 5491-2020 Polymethacrylimide foam board

Group Standards of the People's Republic of China

• T/HEBQS 21-2023 Polyacrylamide cross-linking agent for oil and water wells
• T/ZZB 3494-2023 Biaxially stretched polypropylene/polyamide/polyethylene composite films for food packaging
• T/QGCML 4435-2024 Drag reducer acrylamide polymer FC-04 for fracturing
• T/CPCIF 0053-2020 2-Acrylamido-2-methylpropanesulfonic acid
• T/HBFIA 0018-2021 polypropylene plastic container
• T/GXTY 004-2019 Sugar industry aid flocculant polyacrylamide

未注明发布机构

• DIN EN ISO 16396-2 E:2015-08 Plastic polyamide (draft)
• DIN EN ISO 16396-1 E:2012-07 Plastic polyamide (draft)
• DIN EN ISO 16396-1 E:2021-08 Plastic polyamide (draft)

Professional Standard - Chemical Industry

• HG/T 6258-2023 Plastic Thermoplastic polyimide (PI) resin
• HG/T 3642-2016 Water treatment chemicals-Acrylic acid-2-acrylamido-2-methylpropanesulfomic acid copolymers
• HG/T 3642-1999 Water treatment chemicals - Acrylic acid-2 - Acrylamido-2 - Methyl - Propane - Sulfomic acid copolymers
• HG/T 6174-2023 Green factory evaluation requirements for polyacrylamide industry

国家能源局

• SY/T 5946-2019 Encapsulation inhibitor for drilling fluid- Potassium hydrolyzed polyacrylamide
• SY/T 5661-2019 Viscosifier for drilling fluid-Acrylamide polymers
• SY/T 5660-2020 Macromolecular flocculants used in drilling fluid-Polyacrylamide

Taiwan Provincial Standard of the People's Republic of China

• CNS 14679-2002 Polypropylene (PP) pipes

Professional Standard - Petrochemical Industry

• SH 2604.10-2003 Water treatment chemicals - Polymers containing AMPS

American Water Works Association (AWWA)

• ANSI/AWWA B453-2006 Polyacrylamide
• AWWA B453-2013 Polyacrylamide
• AWWA B453 ADD A-2007 Polyacrylamide
• ANSI/AWWA B453-2019 Polyacrylamide
• AWWA B453-2006 Polyacrylamide
• AWWA B453-2001 Polyacrylamide ANSI/AWWA B453-01

American National Standards Institute （ANSI)

• ANSI/AWWA B453-2013 Polyacrylamide
• ANSI/ASTM F1733a:2013 Specification for Butt Heat Fusion Polyamide (PA) Plastic Fitting for Polyamide (PA) Plastic Pipe and Tubing
• ANSI/ASTM F1733:2013 Specification for Butt Heat Fusion Polyamide (PA) Plastic Fitting for Polyamide (PA) Plastic Pipe and Tubing

SCC

• AWWA B453-2019 Polyacrylamide
• MIL MIL-P-44305-1988 PLASTIC FILM, FLEXIBLE, POLYAMIDE AND POLYETHYLENE
• AWWA B453-1996 Polyacrylamide (includes addendum B453a-97
• HOLDEN HN 2411-2012 Acrylonitrile Butadiene Styrene ABS and Polyamide 6 Alloys
• HOLDEN HN 2411-2004 ACRYLONITRILE BUTADIENE STYRENE (ABS) AND POLYAMIDE 6 ALLOYS
• SAE AMSP46112-2000 Plastic Sheet and Strip, Polyimide
• BS EN ISO 3451-4:1996 Plastics. Determination of ash-Polyamides
• BS EN ISO 307:2003 Plastics. Polyamides. Determination of viscosity number

U.S. Military Regulations and Norms

• ARMY MIL-P-44305-1988 PLASTIC FILM, FLEXIBLE, POLYAMIDE AND POLYETHYLENE

GM Europe

• GME STD 518739-2002 Plastic 8739 ABS+PA6 Plast 8739 ABS+PA6 English/Swedish
• GME QK 001266-2008 Blend of polyamide 6 and polypropylene (PP) English/German
• GME QK 001221-2005 Blend of polyamide 6 and polypropylene (PP) English/German
• GME QK 001226-2002 Blend from Polyamide 66, Polyamide 6 and Polyethylene Blend from Polyamide 66, Polyamide 6 and Polyethylene English/German

GM North America

• GM GMP.PMMA.013-1998 Acrylic - Imide Copolymer, Weather Resistant
• GM GMP.PMMA.014-1998 Acrylic - Imide Copolymer, Exterior Lenses

TH-TISI

• TIS 655.2-2011 Plastic utensils for food.part 2: poly (vinyl chloride) polycarbonate polyamide and poly (methyl methacrylate)

GM Daewoo

• GMKOREA EDS-M-5135-2012 Polyamide 6 / Acrylonitrile- Butadiene-Styrene Copolymer Blend

CZ-CSN

• CSN ISO 9113:1993 Plastics. Polypropylene (PP) and propylene-copolymer thermoplastics. Determination of izotaciticity index

German Institute for Standardization

• DIN EN ISO 19069-2:2023-02 Plastics - Polypropylene (PP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO/DIS 19069-2:2023); German and English version prEN ISO 19069-2:2023 / Note: Date of issue 2023-01-06*Intended as...
• DIN 53746:1990 Testing of plastics; proof of polyamides

American Society for Testing and Materials (ASTM)

• ASTM F1733-96e1 Standard Specification for Butt Heat Fusion Polyamide(PA) Plastic Fitting for Polyamide(PA) Plastic Pipe and Tubing
• ASTM F1733-96 Standard Specification for Butt heat Fusion Polyamide(PA) Plastic Fitting for Polyamide(PA) Plastic Pipe and Tubing
• ASTM F1733-96(2002) Standard Specification for Butt Heat Fusion Polyamide(PA) Plastic Fitting for Polyamide(PA) Plastic Pipe and Tubing
• ASTM F1733-07 Standard Specification for Butt Heat Fusion Polyamide(PA) Plastic Fitting for Polyamide(PA) Plastic Pipe and Tubing
• ASTM F1733-24 Standard Specification for Butt Heat Fusion Polyamide(PA) Plastic Fitting for Polyamide(PA) Plastic Pipe and Tubing

International Organization for Standardization (ISO)

• ISO/R 1874:1971 Plastics — Specification for polyamide homopolymers
• ISO 1873-1:1991 Plastics; polypropylene (PP) and propylene-copolymer thermoplastics; part 1: designation
• ISO 1873-1:1980 Title missing - Legacy paper document
• ISO 1218:1975 Plastics; Polyamides; Determination of "melting point"

Korean Agency for Technology and Standards (KATS)

• KS M 3846-2010(2020) Plastics－Recycled moulding materials－Polyamide(PA)

SE-SIS

• SIS SS 16 43 24-1980 Plastics — Polyamides — Determination of ?melting point))

Association of German Mechanical Engineers

• DVS 2204-4-1981 Glueing of thermoplastics; polyamides

Society of Automotive Engineers (SAE)

• SAE AMS3644B-1992 PLASTIC ROD AND BAR, POLYIMIDE Molded
• SAE AMS3644-1979 PLASTIC ROD AND BAR, POLYIMIDE Molded

SAE - SAE International

• SAE AMS3644C-1994 PLASTIC ROD AND BAR, POLYIMIDE Molded

British Standards Institution (BSI)

• BS EN ISO 307:2019 Plastics. Polyamides. Determination of viscosity number

Association Francaise de Normalisation

• NF T51-173*NF EN ISO 307:2019 Plastics - Polyamides - Determination of viscosity number
• NF EN ISO 11337:2023 Plastiques - Polyamides - Détermination du epsilon-caprolactame et du omega-laurolactame par chromatographie en phase gazeuse

Others: polyacrylamide,Polyacrylamide+ Standard,pagepolyacrylamide,Electrophoretic polyacrylamide,Polyacrylamide test,Polyacrylamide Products,Polyacrylamide Potassium Salt,Polyacrylamide page,Polyacrylamide Products,polyacrylamide residue,Plastics - Breakdown properties of rigid plastics,plastic microplastic,as plastic,as plastic,polyacrylamide plastic,Plastic Testing Testing Plastics,plastic as,Plastics and Plastic Products