liquid organic phase pressure

liquid organic phase pressure, Total:386 items.

The international standard classification for "liquid organic phase pressure" includes: Piping and couplings , Fluid power systems , Transformers. Reactors , Mechanical testing , Photographic equipment. Projectors , Fertilizers , Fluid power systems in general , Rubber , Chemical analysis , Filters, seals and contamination of fluids , Biology. Botany. Zoology , Lubricants, industrial oils and related products , Installations and equipment for waste disposal and treatment , Forging equipment. Presses. Shears , Examination of water for chemical substances , Other equipment related to power transmission and distribution networks , Extraction and processing of petroleum and natural gas .

The Chinese standard classification for "liquid organic phase pressure" includes: Hydraulic and pneumatic device , Transformer , Metal material testing machine , Crime judging technology , Camera and photograph instrument , Basic standards and general methods on chemical fertilizers , Rubber products in general , Basic standards and general methods , Basic Subject in general , Special electronic technology material , Synthetic grease , Environmental protection equipment , Metal forming machinery , Coal gas , Analysis methods for toxic substances in water , Complete equipment for high voltage device , Petroleum development , Legal medical expert , Insulating oil .

Henan Provincial Standard of the People's Republic of China

DB41/T 1887-2019 Specification for supervision and inspection of installation of organic heat carrier liquid phase furnace

Group Standards of the People's Republic of China

T/CSEE /Z0013-2016 Guide for leading power factor ability calculation of synchronous
T/DLSHXH 010-2024 Standard column for normal phase test of liquid chromatograph
T/ZZB 0703-2018 Dense pneumatic sliding conveyor system
T/SDMT 0003-2023 Electro-hydraulic system for CNC Die-cushion in Heavy-duty Press
T/CAAMM 138-2021 Hydraulic booster of tractors
T/ZZB 0529-2018 Three-phase induction motors for screw compressors
T/ZZB 3063-2023 Solid-liquid two-phase flow hydraulic diaphragm pump
T/NAIA 0200-2023 Determination of Various Organic Acids in Wine by High Performance Liquid Chromatography
T/NAIA 0207-2023 Determination of Organic Acids in Wine Grapes and Wine by Liquid Chromatography-Mass Spectrometry
T/CEEIA 743-2023 Direct-drive three-phase permanent magnet torque motor
T/ZZB 1424-2019 Energy saving low noise three phase dry type power transformer
T/SXNA 003-2021 Nursing standard of device related pressure injuries
T/DALN 037-2024 Determination of organic acid content in silage by high performance liquid chromatography
T/ZJATA 0011-2022 Soil-Determination of organic acids (formic acid, acetic acid, propionic acid, acrylic acid)-High performance liquid chromatography
T/CRHA 060-2024 Detecting organic acids in urine—Gas chromatography-mass spectrometry method

未注明发布机构

IEEE Std 252-2022 IEEE Test Procedure for Polyphase Induction Motors Having Liquid in the Magnetic Gap
DIN EN 16125 E:2015-05 LPG Equipment and Accessories - Pipework systems and supports - LPG in liquid phase and vapour pressure phase
DIN EN 16125 E:2010-07 LPG Equipment and Accessories - Pipework systems and supports - LPG in liquid phase and vapour pressure phase
DIN CEN/TS 17765:2022 Organic and organo-mineral fertilizers - Determination of the biuret content by high-performance liquid chromatography (HPLC)
DIN EN 16125 E:2018-04 LPG Equipment and Accessories - Pipework systems and supports - LPG in liquid phase and vapour pressure phase
IEEE Std 252-1995(R2007) IEEE Test Procedure for Polyphase Induction Motors Having Liquid in the Magnetic Gap
DIN EN 16125 E:2013-09 LPG Equipment and Accessories - Pipework systems and supports - LPG in liquid phase and vapour pressure phase
AS 4621:2019/Amdt 1:2022 Regulators for use with liquefied petroleum - Vapour phase

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 7937-2002 Fluid power systems and components--Connectors and associated components--Nominal pressures
GB/T 9008-1988 Terms of liquid chromatography--Liquid column chromatography and planar chromatography
GB/T 13985-2008 Operating force and strength of camera
GB/T 14041.2-1993 Hydraulic fluid power－Filter elements－Verification of material compatibility with fluids
GB/T 30491.2-2024 Natural gas—Calculation of thermodynamic properties—Part 2:Single-phase properties (gas，liquid，and dense fluid) for extended ranges of application
GB/T 3722-1992 Hydraulic compression testing machines
GB/T 13985-1992 Operating force and strength of camera
GB/T 14832-2008 Test methods for compatibility between hydraulic fluids and standard elastomeric materials
GB/T 7937-2008 Fluid power systems and components - Connectors and associated components - Nominal pressures
GB/T 23755-2009 Three-phase site-combined power transformers
GB/T 14832-1993 Test of compatibility between rubber material and hydraulic fluid
GB 9008-1988 Terms of liquid chromatography; Liquid column chromatography and planar chromatography
GB/T 12576-1990 liquefied petrorum gases--calculation of vapour pressure and relative density
GB/T 32951-2016 Determination of oxytetracyline, tetracyline, chlortetracycline and doxycycline content for organic fertilizers - HPLC method
GB/T 14041.2-2007 Hydraulic fluid power—Filter elements—Part 2:Verification of material compatibility with fluids
GB/T 42429-2023 Forensic sciences—Examination methods for organic substances of propellants—Liquid chromatography-mass spectrometry

Professional Standard - Commodity Inspection

SN/T 3127-2012 Determination of organic peroxides in organic peroxide preparation-Liquid chromatography
SN/T 3817-2014 Determination of antiager D in pressure-sensitive adhesive - Liquid chromatography
SN/T 2527-2010 General rules for determination of active ingredient content of pesticides for import by high performance liquid chromatography

Professional Standard - Nuclear Industry

EJ/T 20190-2018 Gas Chromatography Method for Determination of TBP and DBP Concentration in Low-level Organic Waste Liquid

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 40462-2021 Determination of 19 veterinary medicines in organic fertilizer—Liquid chromatography-tandem mass spectrometry
GB/T 40179-2021 Determination of organic acids in plant—Liquid chromatography-tandem mass spectrometry
GB/T 23755-2020 Three-phase site-combined power transformer
GB/T 37285-2019 Reference fluids for compatibility tesing of motor vehicle braking fluids
GB/T 37949-2019 Purity test method of small molecule materials applied in organic light emitting diode display(OLED)—High performance liquid chromatography (HPLC)

Professional Standard - Machinery

JB/T 8469-1996 Fully hydraulic static pile drivers
JB/T 12510-2015 Pressure leveling hydraulic press for medium and heavy steel plate
JB/T 8470-2010 Positive pressure dense pneumatic ash conveying system
JB/T 2474-1999 Hydraulic Screw Press Basic Parameters
JB/T 5541-1991 Camera leather with pressure sensitive adhesive
JB/T 8470-1996 Positive pressure dense phase pneumatic transportation system
JB/T 5523-1991 Hydraulic spring pressure testing machine

Professional Standard - Petrochemical Industry

SH/T 0221-1992 Determination method for density or relative density of liquefied petroleum gas (pressure hydrometer method)

水利部

SL/T 739-2016 Water Quality Determination of Organophosphorus Pesticides Solid Phase Extraction-Gas Chromatography

Professional Standard - Agriculture

SL 739-2016 SL/T 739-2016 Water quality - Determination of organophosphorus pesticides - Solid-phase-extraction/gas chromatography

National Metrological Verification Regulations of the People's Republic of China

JJG 1117-2015 Verification Regulation of Hydraulic-amplification Force Standard Machines

Taiwan Provincial Standard of the People's Republic of China

CNS 11873-1999 Pole changing low-voltage three-phase induction motors
CNS 1056-1999 Low-voltage three-phase inductionmotors
CNS 1057-2001 Low-Voltage Single-Phase Induction Motors
CNS 11814-1987 Low-voltage Three-phase Induction Motors in Ships
CNS 1373-1999 High-voltage(3．3kV)three-phase induction motors

国家能源局

NB/T 10327-2019 Low-voltage active three-phase unbalanced load regulator

农业农村部

NY/T 3167-2017 Determination of sulfonamides in organic fertilizer- Liquid chromatography-tandem mass spectrometry

Anhui Provincial Standard of the People's Republic of China

DB34/T 3053-2017 Determination of non-volatile organic acids in liquor by high performance liquid chromatography-tandem mass spectrometry

国家质量监督检验检疫总局

SN/T 4933-2017 Determination of Carbonyl Compounds in textiles of Vehicles-high performance liquid chromatography method

Professional Standard - Chemical Industry

HG/T 3012-1989(1997) Coding principle for organic additives in photographic materials
HG/T 2112-1991 Hydraulic tire vulcanizing machine

工业和信息化部/国家能源局

JB/T 12510-2014 Medium thick steel plate pressure leveling hydraulic press

工业和信息化部

JB/T 2474-2018 Hydraulic screw press一Basic parnmeter
HG/T 5997-2022 Gas cyclone-liquid jet gas purifier

Professional Standard - Petroleum

SY/T 6573-2003 Measurement method for minimum miscibility pressure by slim tube test
SY/T 5834-2014 Performance specifications and measuring methods of low-solid killing fluid

司法部

SF/T 0115-2021 Determination of 45 toxic alkaloids in blood by liquid chromatography - tandem mass spectrometry

Professional Standard - Electricity

DL/T 704-1999 Determination of T501 oxidation inhibitor content in transformer oil or turbine oil by liquid chromatography

RU-GOST R

GOST R 54684-2011 Juice products. Determination of organic acids by reversed-phase high performance liquid chromatography (HPLC)
GOST R 53911-2010 Vegetable oils. Determination of organochlorme pesticides using gas-liquid chromatography method
GOST 32308-2013 Meat and meat products. Gas-liquid chromatography method of determination of the content of chlorine organic pesticide
GOST 32771-2014 Juice products. Determination of organic acids by reversed-phase High Performance Liquid Chromatography (HPLC)
GOST ISO 3993-2013 Liquefied petroleum gases and light hydrocarbons. Determination of density or relative density. Pressure hydrometer method
GOST 32122-2013 Vegetable oils. Determination of organochlorine pesticides using gas-liquid chromatography method
GOST R ISO 2943-2011 Hydraulic fluid power. Filter elements. Verification of material compatibility with fluids
GOST 16555-1975 Three-phase oil-filled hermetic power transformers. Specifications

SCC

AWWA WQTC58856 Organophosphorous Pesticides Determination: Solid Phase Extraction Versus Liquid-Liquid Extraction
CAN/CSA-C2.1-2006(R2011) Single-Phase and Three-Phase Liquid-Filled Distribution Transformers
DANSK DSF/PREN IEC/IEEE 60076-57-1202 Power transformers – Part 57-1202: Liquid immersed phase-shifting transformers
BS ISO 4413:1998 Hydraulic fluid power. General rules relating to systems
CAN/CSA-C2.1-2006(C2011) Single-phase and three-phase liquid dielectric distribution transformers
SN-CEN/TS 17765:2022 Organic and organo-mineral fertilizers - Determination of the biuret content by high-performance liquid chromatography (HPLC)
DANSK DS/CEN/TS 17765:2022 Organic and organo-mineral fertilizers – Determination of the biuret content by high-performance liquid chromatography (HPLC)
BS PD CEN/TS 17765:2022 Organic and organo-mineral fertilizers. Determination of the biuret content by high-performance liquid chromatography (HPLC)
MIL MIL-PRF-27/346C-2012 Transformers, Power, 150 Voltamperes, 3-Phase
MIL MIL-PRF-27/347C-2012 Transformers, Power, 200 Voltamperes, 3-Phase
MIL MIL-PRF-27/349C-2012 Transformers, Power, 375 Voltamperes, 3-Phase
MIL MIL-PRF-27/364A-2010 Transformers, Power, 107 Voltamperes, 3-Phase
MIL MIL-PRF-27/348C-2012 Transformers, Power, 270 Voltamperes, 3-Phase
AWWA ACE60017 Low Pressure Membrane (MF/UF) Fouling Associated with Allochthonous versus Autochthonous Natural Organic Matter (NOM)
BS PD CEN/TS 17784-2:2022 Organo-mineral fertilizers. Identification of complexing agents-Method using high-performance liquid chromatography (HPLC)
DANSK DS/EN 1762/AC:2003 Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa) – Specification
NS-EN 1762:2018 Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa) — Specification
DANSK DS/EN 1762:2019 Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa) – Specification
NS-EN 1762:1997 Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa) — Specification
BS EN 1762:1998 Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa). Specification
AENOR UNE-EN 16125:2016 LPG Equipment and Accessories - Pipework systems and supports - LPG in liquid phase and vapor pressure phase
DIN IEC 60076-57-1202 E:2015 Draft Document - Power transformers - Part 57-1202: Liquid immersed phase-shifting transformers (IEC 14/787/CD:2014)
NS-EN 16125:2019 LPG Equipment and Accessories — Pipework systems and supports — LPG in liquid phase and vapour pressure phase
CSA C2.1-2006(R2022) Single-Phase and Three-Phase Liquid-Filled Distribution Transformers, Includes Update No. 1 (2007)
DANSK DS/EN 16125:2019 LPG Equipment and Accessories – Pipework systems and supports – LPG in liquid phase and vapour pressure phase
NS-EN 16125:2015 LPG Equipment and Accessories — Pipework systems and supports — LPG in liquid phase and vapour pressure phase
DIN EN 16125 E:2018 Draft Document - LPG Equipment and Accessories - Pipework systems and supports - LPG in liquid phase and vapour pressure phase; German and English version prEN 16125:2018
DIN IEC /IEEE 60076-57-1202 E:2021 Draft Document - Power transformers - Part 57-1202: Liquid immersed phase-shifting transformers (IEC/IEEE 60076-57-1202:2017)
NZS 8311:1970 Method for the determination of the relative milk-coagulating power of rennet solutions
DANSK DS/EN 16330:2013 Winter and road service area equipment - Power system and related controls - Power hydraulic system and electric
DANSK DS/CEN/TS 17784-2:2022 Organo-mineral fertilizers – Identification of complexing agents – Part 2: Method using high-performance liquid chromatography (HPLC)
UNE 84666:2006 Cosmetic raw materials. Plants extracts. Quantitative determination of organic acid by HPLC.
DIN CEN/TS 17784-2:2022 Organo-mineral fertilizers - Identification of complexing agents - Part 2: Method using high-performance liquid chromatography (HPLC); German version CEN/TS 17784-2:2022
SN-CEN/TS 17784-2:2022 Organo-mineral fertilizers - Identification of complexing agents - Part 2: Method using high-performance liquid chromatography (HPLC)
DIN ISO 3724:1990 Hydraulic fluid power; filter elements; verification of flow fatigue characteristics; identical with ISO 3724:1976
AENOR UNE 20670-2:1982 PRESSURE SWITCHES. GENERAL RULES FOR WRITING SPECIFICATIONS RELATING TO MULTIPLE PRESSURE SWITCHES
UNE-EN 1601:1999 ERRATUM LIQUID PETROLEUM PRODUCTS. UNLEADED PETROL. DETERMINATION OF ORGANIC OXYGENATE COMPOUNDS AND TOTAL ORGANICALLY BOUND OXYGEN CONTENT BY GAS CHROMATOGRAPHY (O-FID).
10/30227098 DC BS EN 16125. LPG equipment and accessories. Pipework systems and supports. LPG liquid phase and vapour pressure phase
DANSK DS/EN 1601:1997 Liquid petroleum products - Unleaded petrol - Determination of organic oxygenate compounds and total organically bound oxygen content by gas chromatography (O-FID)
NS-EN 17613:2022 LPG equipment and accessories - Composite piping for use with LPG in liquid phase and vapour pressure phase - Design and manufacture
UNE-EN 1601:1998 LIQUID PETROLEUM PRODUCTS. UNLEADED PETROL. DETERMINATION OF ORGANIC OXYGENATE COMPOUNDS AND TOTAL ORGANICALLY BOUND OXYGEN CONTENT BY GAS CHROMATOGRAPHY (O-FID).
NS-EN 1601:1997 Liquid petroleum products - Unleaded petrol - Determination of organic oxygenate compounds and total organically bound oxygen content by gas chromatography (O-FID)
DANSK DS/EN ISO 6468:2000 Water quality - Determination of certain organochlorine insecticides, polychlorinated biphenyls and chlorobenzenes - Gas chromatographic method after liquid-liquid extraction
DANSK DS/EN ISO 3993:1996 Liquefied petroleum gas and light hydrocarbons - Determination of density or relative density - Pressure hydrometer method
NS-EN 16330:2013 Winter and road service area equipment — Power system and related controls — Power hydraulic system and electric interfaces
NS-EN 1601:2014 Liquid petroleum products — Unleaded petrol — Determination of organic oxygenate compounds and total organically bound oxygen content by gas chromatography (O-FID)
CAN/CSA-C2.2-2006(R2011) Pole-mounted, Single-phase Distribution Transformers for Electric Utilities
DANSK DS/EN 17613:2022 LPG equipment and accessories – Composite piping for use with LPG in liquid phase and vapor pressure phase – Design and manufacture
BS PD IEC TS 62882:2020 Hydraulic machines. Francis turbine pressure fluctuation transposition
UNE-EN 764-3:2003 PRESSURE EQUIPMENT - PART 3: DEFINITION OF PARTIES INVOLVED.
NS-EN 764-3:2002 Pressure equipment — Part 3: Definition of parties involved

(U.S.) Ford Automotive Standards

FORD M6C47-A-1985 HYDRAULIC FLUID - INVERSE EMULSION - FIRE RESISTANT

AT-ON

ONORM ISO 2943:1982 Hydraulic fluid power; fllter elements veriflcation of material compatibility with fluids
ONORM M 2013-1977 Hydraulic and pneumatic cylinders; pressure connections; relation to the cylinder bores.
OENORM EN 17613-2020 LPG equipment and accessories - Composite piping for use with LPG in liquid phase and vapour pressure phase - Design and manufacture

Society of Motion Picture and Television Engineers (SMPTE)

SMPTE ST 199-2003 Motion-Picture Film (8-mm Type S) - 50-ft Model 1 Sound Camera Cartridge - Pressure Pad Flatness and Camera Aperture Profile
SMPTE ST 198-2003 Motion-Picture Film (8-mm Type S) - 50-ft Model 1 Sound Camera Cartridge - Aperture, Pressure Pad and Film Position

GSO

GSO IEC/IEEE 60076-57-1202:2021 Power transformers - Part 57-1202: Liquid immersed phase-shifting transformers
BH GSO IEC/IEEE 60076-57-1202:2022 Power transformers - Part 57-1202: Liquid immersed phase-shifting transformers
GSO ISO 6468:2015 Water quality -- Determination of certain organochlorine insecticides, polychlorinated biphenyls and chlorobenzenes -- Gas chromatographic method after liquid-liquid extraction
BH GSO ISO 6468:2016 Water quality -- Determination of certain organochlorine insecticides, polychlorinated biphenyls and chlorobenzenes -- Gas chromatographic method after liquid-liquid extraction
OS GSO ISO 7382:2008 Ethylene for industrial use - Sampling in the liquid and the gaseous phase
BH GSO ISO 3993:2017 Liquefied petroleum gas and light hydrocarbons -- Determination of density or relative density -- Pressure hydrometer method
OS GSO ISO 3993:2016 Liquefied petroleum gas and light hydrocarbons -- Determination of density or relative density -- Pressure hydrometer method
GSO ISO 3993:2016 Liquefied petroleum gas and light hydrocarbons -- Determination of density or relative density -- Pressure hydrometer method

IEEE - The Institute of Electrical and Electronics Engineers@ Inc.

IEEE 60076-57-1202-2017 Power transformers – Part 57-1202: Liquid immersed phase-shifting transformers
IEEE 252-1977 TEST PROCEDURE FOR POLYPHASE INDUCTION MOTORS HAVING LIQUID IN THE MAGNETIC GAP (R 1984)

Association Francaise de Normalisation

NF M88-761*NF EN 16125:2019 LPG Equipment and Accessories - Pipework systems and supports - LPG in liquid phase and vapour pressure phase
NF E48-201:1999 Hydraulic fluid power. General rules relating to systems.
XP CEN/TS 17765:2022 Organic and organo-mineral fertilizers - Determination of biuret content by high performance liquid chromatography (HPLC)
NF EN 61099:2011 Insulating liquids - Specifications relating to new synthetic organic esters intended for electrical equipment
XP U42-720*XP CEN/TS 17765:2022 Organic and organo-mineral fertilizers - Determination of the biuret content by high-performance liquid chromatography (HPLC)
NF EN 1762:2018 Rubber hoses and hoses for liquefied petroleum gas LPG (in liquid or gas phase) and natural gas up to 25 bar (2.5 MPa) - Specification
NF X45-600:1992 liquid - solid separation - Specifications for defining liquid-solid separating equipment
FD E48-697*FD ISO/TR 10686:2014 Hydraulic fluid power - Method to relate the cleanliness of a hydraulic system to the cleanliness of the components and hydraulic fluid that make up the system
NF E49-602*NF ISO 5784-3:1990 Fluid power systems and components. Fluid logic circuit. Part 3 : symbols for logic sequencers and related functions.
NF ISO 7382:1987 Éthylène à usage industriel - Échantillonnage en phase liquide et en phase gazeuse.
NF T20-817*NF ISO 7382:1987 Ethylene for industrial use. Sampling in the liquid and the gaseous phase.
NF M07-088:2015 Liquid petroleum products - Unleaded petrol - Determination of organic oxygenate compounds and total organically bound oxygen content by gas chromatography (O-FID)
NF EN ISO 6468:1997 Water quality - Determination of certain organochlorine insecticides, polychlorinated biphenyls and chlorobenzenes - Gas chromatography method after liquid-liquid extraction
XP CEN/TS 17784-2:2022 Engrais organo-minéraux - Identification des agents complexants - Partie 2 : méthode par chromatographie liquide à haute performance (HPLC)
NF M07-088:1997 Liquid petroleum products. Unleaded petrol. Determination of organic oxygenate compounds and total organically bound oxygen content by gas chromatography (O-FID).
NF E63-131-4:2014 Tools for pressing - Gas Springs - Part 4 : gas springs with increased spring force and same build height
NF E49-601*NF ISO 5784-2:1990 Fluid power systems and components. Fluid logic circuits. Part 2 : symbols for supply and exhausts as related to logic symbols.
NF E63-131-4*NF ISO 11901-4:2021 Tools for pressing - Gas springs - Part 4 : gas springs with increased spring force and same built height
NF EN ISO 4256:1998 Liquefied petroleum gases - Determination of relative vapor pressure - LPG method
NF EN ISO 3993:1995 Liquefied petroleum gases and light hydrocarbons - Determination of density or relative density - Pressure hydrometer method
NF P98-914*NF EN 16330:2013 Winter and road service area equipment - Power system and related controls - Power hydraulic system and electric
NF T60-621*NF EN ISO 20763:2004 Petroleum and related products - Determination of anti-wear properties of hydraulic fluids - Vane pump method
NF T90-120*NF EN ISO 6468:1997 Water quality - Determination of certain organochlorine insecticides, polychlorinated biphenyls and chlorobenzenes - Gas chromatographic method after liquid-liquid extraction.
NF S93-123-8:2004 Infusion equipment for medical use - Part 8 : infusion equipment for use with pressure infusion apparatus.
NF EN 13132:2000 Liquid petroleum products - Unleaded gasoline - Determination of organic oxygenates and total organic oxygen content by column switching gas chromatography

CEN - European Committee for Standardization

PREN 16125-2018 LPG Equipment and Accessories - Pipework systems and supports - LPG in liquid phase and vapour pressure phase

International Electrotechnical Commission (IEC)

IEC/IEEE 60076-57-1202-2017 Power transformers - Part 57-1202: Liquid immersed phase-shifting transformers
IEC/IEEE 60076-57-1202:2017 Power transformers - Part 57-1202: Liquid immersed phase-shifting transformers

German Institute for Standardization

DIN EN 16125:2019 LPG Equipment and Accessories - Pipework systems and supports - LPG in liquid phase and vapour pressure phase
DIN CEN/TS 17765:2022-07 Organic and organo-mineral fertilizers - Determination of the biuret content by high-performance liquid chromatography (HPLC); German version CEN/TS 17765:2022
DIN EN 1762:2019-03 Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa) - Specification; German version EN 1762:2018
DIN 51345:1986 Testing the compatibility of fire-resistant hydraulic fluids with metals
DIN EN 16125:2019-12 LPG Equipment and Accessories - Pipework systems and supports - LPG in liquid phase and vapour pressure phase; German version EN 16125:2019
DIN EN ISO 6468:1997 Water quality - Determination of certain organochlorine insecticides, polychlorinated biphenyls and chlorobenzenes - Gas-chromatographic method after liquid-liquid extraction (ISO 6468:1996); German version EN ISO 6468:1996
DIN EN 17613:2022 LPG equipment and accessories - Composite piping for use with LPG in liquid phase and vapour pressure phase - Design and manufacture
DIN 24540-2:1986-03 Rod and tube-presses for non-ferrous metals and their tools; application "light metals"; sizes, tools, correlation
DIN CEN/TS 17784-2:2022-07 Organo-mineral fertilizers - Identification of complexing agents - Part 2: Method using high-performance liquid chromatography (HPLC); German version CEN/TS 17784-2:2022
DIN EN 17613:2023 LPG equipment and accessories - Composite piping for use with LPG in liquid phase and vapour pressure phase - Design and manufacture
DIN EN 17613:2020 LPG equipment and accessories - Composite piping for use with LPG in liquid phase and vapour pressure phase - Design and manufacture; German and English version prEN 17613:2020
DIN EN 17613:2023-08 LPG equipment and accessories - Composite piping for use with LPG in liquid phase and vapour pressure phase - Design and manufacture; German version EN 17613:2022
DIN EN ISO 20623:2004 Petroleum and related products - Determination of the extreme-pressure and anti-wear properties of fluids - Four ball method (European conditions) (ISO 20623:2003); German version EN ISO 20623:2003
DIN EN 16330:2013-07 Winter and road service area equipment - Power system and related controls - Power hydraulic system and electric interfaces; German version EN 16330:2013
DIN EN 14673:2007 Safety of machinery - Safety requirements for hydraulically powered open die hot forging presses for the forging of steel and non-ferrous metals; German version EN 14673:2006
DIN EN ISO 8536-8:2005 Infusion equipment for medical use - Part 8: Infusion equipment for use with pressure infusion apparatus (ISO 8536-8:2004); German version EN ISO 8536-8:2004

PL-PKN

PN M73052-1990 Hydraulic fluids power Compatibility between elastomeric materials and fluids
PN E80412-1972 Rotating electrical machines Thres-phase Squirrel-cage mo?ors Dimensions in relation wi?h power
PN M68005-1974 Hydraulic presses Capaci?y of ?he press

Canadian Standards Association (CSA)

CSA C2.1-06 UPD 1-2007 Single-phase and three-phase liquid-filled distribution transformers
CSA C2.1-06-2006 Single-phase and three-phase distribution transformers - liquid dielectric Premiere edition;
CSA C2.1-2006 Single-phase and three-phase liquid dielectric distribution transformers (First edition;)
CAN/CSA-C2.1-2006 Single-phase and three-phase liquid-filled distribution transformers (First Edition; Update No. 1: February 2007)
CSA C199-08-2008 Three-phase network distribution transformers Third Edition

Danish Standards Foundation

DS/ISO 4399:1989 Fluid power systems and components. Connectors and associated components. Nominal pressures
DS/EN 14673+A1:2010 Safety of machinery - Safety requirements for hydraulically powered open die hot forging presses for the forging of steel and non-ferrous metals
DS/EN 16330:2013 Winter and road service area equipment - Power system and related controls - Power hydraulic system and electric
DS/EN ISO 3993:1996 Liquefied petroleum gas and light hydrocarbons - Determination of density or relative density - Pressure hydrometer method
DS/EN ISO 6468:2000 Water quality - Determination of certain organochlorine insecticides, polychlorinated biphenyls and chlorobenzenes - Gas chromatographic method after liquid-liquid extraction

VDI - Verein Deutscher Ingenieure

VDI 3145 Blatt 1-1984 Presses for cold forging; mechanical and hydraulic presses
VDI 3145 Blatt 1-1983 Machines for cold forging; mechanical and hydraulic presses
VDI 3185 Blatt 2-1970 Calculation of the obtained punch force and the greatest extrusion force for can and backward extrusion of steel at a room temperature

British Standards Institution (BSI)

PD CEN/TS 17765:2022 Organic and organo-mineral fertilizers. Determination of the biuret content by high-performance liquid chromatography (HPLC)
BS EN 1762:2018 Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa). Specification
BS ISO 11901-4:2014 Tools for pressing. Gas springs. Gas springs with increased spring force and same built height
BS EN 16125:2019 LPG Equipment and Accessories. Pipework systems and supports. LPG in liquid phase and vapour pressure phase
BS EN 16125:2015 LPG Equipment and Accessories. Pipework systems and supports. LPG in liquid phase and vapour pressure phase
BS ISO 2943:1998 Hydraulic fluid power - Filter elements - Verification of material compatibility with fluids
BS ISO 2943:1999 Hydraulic fluid power. Filter elements. Verification of material compatibility with fluids
BS EN 17681-1:2022 Textiles and textile products. Organic fluorine - Determination of non-volatile compounds by extraction method using liquid chromatography
BS 6361:1988 Specification for three-pin plug connectors for electrically controlled fluid power equipment
BS EN 16330:2013(2016) Winter and road service area equipment — Power system and related controls — Power hydraulic system and electric
BS EN ISO 22744-2:2020 Textiles and textile products. Determination of organotin compounds - Direct method using liquid chromatography
PD CEN/TS 17784-2:2022 Organo-mineral fertilizers. Identification of complexing agents. Method using high-performance liquid chromatography (HPLC)
BS EN 13562:2000 Geotextiles and geotextile-related products - Determination of resistance to penetration by water (hydrostatic pressure test)
BS ISO 7382:2023 Ethylene for industrial use. Sampling in the liquid and the gaseous phase
BS EN ISO 16092-3:2018 Machine tools safety. Presses. Safety requirements for hydraulic presses
BS EN 17613:2022 LPG equipment and accessories. Composite piping for use with LPG in liquid phase and vapour pressure phase. Design and manufacture
BS EN 50708-2-1:2020 Power transformers. Additional European requirements. Medium power transformer. Single phase
BS EN 50708-1-1:2020 Power transformers. Additional European requirements. Medium power transformer. Single phase
BS EN 50708-2-5:2021 Power transformers. Additional European requirements. Medium power transformer. Single phase
BS EN 50708-3-1:2020 Power transformers. Additional European requirements. Medium power transformer. Single phase
BS EN ISO 6468:1997(2008)*BS 6068-2.57:1997 Water quality — Determination of certain organochlorine insecticides, polychlorinated biphenyls and chlorobenzenes — Gas chromatographic method after liquid - liquid extraction
BS EN ISO 4869-4:2000 Acoustics. Hearing protectors. Measurement of effective sound pressure levels for level-dependent sound-restoration ear muffs
BS EN ISO 6468:1997 Water quality. Determination of certain organochlorine insecticides, polychlorinated biphenyls and chlorobenzenes. Gas chromatographic method after liquid-liquid extraction
BS EN ISO 3993:1996(1999) Liquefied petroleum gas and light hydrocarbons — Determination of density or relative density — Pressure hydrometer method
BS EN 1601:2017*BS 2000-408:2017 Liquid petroleum products. Determination of organic oxygenate compounds and total organically bound oxygen content in unleaded petrol. Method by gas chromatography (O-FID)
BS EN 14673:2006 Safety of machinery - Safety requirements for hydraulically powered open die hot forging presses for the forging of steel and non-ferrous metals
BS EN 16330:2013 Winter and road service area equipment. Power system and related controls. Power hydraulic system and electric
PD IEC TS 62882:2020 Hydraulic machines. Francis turbine pressure fluctuation transposition
BS EN ISO 20763:2004 Petroleum and related products - Determination of anti-wear properties of hydraulic fluids - Vane pump method
BS ISO 10627-2:1996(1998) Hydraulic agricultural sprayers — Data sheets — Part 2 : Technical specifications related to components
20/30424939 DC BS EN 17608. LPG equipment and accessories. Composite piping for use with LPG in liquid phase and vapour pressure phase. Design and manufacture
BS EN 14673:2006+A1:2010 Safety of machinery - Safety requirements for hydraulically powered open die hot forging presses for the forging of steel and non-ferrous metals

VN-TCVN

TCVN 7876-2008 water.Determination of organochlorine pesticides content.Liquid-liquid extraction gas chromatographic method

ES-UNE

UNE-CEN/TS 17765:2022 Organic and organo-mineral fertilizers - Determination of the biuret content by high-performance liquid chromatography (HPLC) (Endorsed by Asociación Española de Normalización in May of 2022.)
IEEE 252-2022 IEEE Standard Test Procedure for Polyphase Induction Motors Having Liquid in the Magnetic Gap
UNE-EN 16125:2020 LPG Equipment and Accessories - Pipework systems and supports - LPG in liquid phase and vapour pressure phase
UNE 84666:2020 Cosmetic raw materials. Plant extracts. Quantitative determination of organic acid by HPLC.
UNE-EN 17613:2022 LPG equipment and accessories - Composite piping for use with LPG in liquid phase and vapour pressure phase - Design and manufacture
UNE-EN ISO 3993:1996 ERRATUM:2011 Liquefied petroleum gas and light hydrocarbons. Determination of density or relative density. Pressure hydrometer method. (ISO 3993:1984).
UNE-EN 16330:2013 Winter and road service area equipment - Power system and related controls - Power hydraulic system and electric interfaces (Endorsed by AENOR in June of 2013.)

European Committee for Standardization (CEN)

EN 16125:2015 LPG Equipment and Accessories - Pipework systems and supports - LPG in liquid phase and vapour pressure phase
CEN/TS 17765:2022 Organic and organo-mineral fertilizers - Determination of the biuret content by high-performance liquid chromatography (HPLC)
EN 16330:2013 Winter and road service area equipment - Power system and related controls - Power hydraulic system and electric
EN 14673:2006+A1:2010 Safety of machinery - Safety requirements for hydraulically powered open die hot forging presses for the forging of steel and non-ferrous metals

International Organization for Standardization (ISO)

ISO/TR 10686:2013 Hydraulic fluid power - Method to relate the cleanliness of a hydraulic system to the cleanliness of the components and hydraulic fluid that make up the system
ISO 2943:1998 Hydraulic fluid power - Filter elements - Verification of material compatibility with fluids
ISO 6468:1996 Water quality - Determination of certain organochlorine insecticides, polychlorinated biphenyls and chlorobenzenes - Gas chromatographic method after liquid-liquid extraction
ISO/PRF 7382 Ethylene for industrial use — Sampling in the liquid and the gaseous phase
ISO 4413:1998 Hydraulic fluid power - General rules relating to systems
ISO 11901-4:2014 Tools for pressing - Gas springs - Part 4: Gas springs with increased spring force and same built height
ISO 7382:2023 Ethylene for industrial use — Sampling in the liquid and the gaseous phase
ISO 7382:1986 Ethylene for industrial use; Sampling in the liquid and the gaseous phase
ISO 5171:1995 Pressure gauges used in welding, cutting and allied processes
ISO 20763:2004 Petroleum and related products - Determination of anti-wear properties of hydraulic fluids - Vane pump method
ISO 3993:1984 Liquefied petroleum gas and light hydrocarbons; Determination of density or relative density; Pressure hydrometer method

Korean Agency for Technology and Standards (KATS)

KS B ISO 6072-2013 Hydraulic fluid power－Compatibility between elastomeric materials and fluids
KS V 8901-2005 Single phase power transformer for marine use
KS V 8901-2020 Single phase power transformer for marine use
KS I ISO 2943-2020 Hydraulic fluid power－Filter elements－Verification of material compatibility with fluids
KS I ISO 2943:2005 Hydraulic fluid power－Filter elements－Verification of material compatibility with fluids
KS I ISO TR 10686-2014(2019) Hydraulic fluid power — Method to relate the cleanliness of a hydraulic system to the cleanliness of the components and hydraulic fluid that make up the system
KS I ISO 2943-2005(2020) Hydraulic fluid power－Filter elements－Verification of material compatibility with fluids
KS I ISO 6468:2008 Water quality-Determination of certain organochlorine insecticides, polychlorinated biphenyls and chlorobenzenes-Gas chromatographic method after liquid-liquid extraction
KS I ISO 6468-2008(2013) Water quality－Determination of certain organochlorine insecticides, polychlorinated biphenyls and chlorobenzenes－Gas chromatographic method after liquid-liquid extraction
KS M ISO 7382:2002 Ethylene for industrial use-Sampling in the liquid and the gaseous phase
KS M ISO 7382:2013 Ethylene for industrial use－Sampling in the liquid and the gaseous phase
KS B ISO 8229:2007 Operations and baths relating to dry－cleaning machines－Vocabulary
KS M ISO 7382-2013 Ethylene for industrial use－Sampling in the liquid and the gaseous phase
KS C 4202-2013 Low-voltage three-phase squirrel-cage induction motors for general purpose
KS M 5000-2019 Testing method for organic coatings and their related materials
KS C 4203-2003(2018) General-purpose high-voltage three-phase induction motor
KS I ISO 6468:2021 Water quality ― Determination of certain organochlorine insecticides, polychlorinated biphenyls and chlorobenzenes ―Gas chromatographic method after liquid-liquid extraction
KS B ISO 6072-2002(2012) Hydraulic fluid power－Compatibility between elastomeric materials and fluids
KS C 4202-2009 Low-voltage three-phase squirrel-cage induction motors for general purpose
KS C 4202-1990 Low-voltage three-phase squirrel-cage induction motors for general purpose
KS C 4202-1985 Low-voltage three-phase squirrel-cage induction motors for general purpose
KS C 4202-1997 Low-voltage three-phase squirrel-cage induction motors for general purpose
KS C 4203-2003 High－voltage three－phase induction motors for general purpose
KS C 4203-1997 High voltage three-phase asynchronous motor universal
KS M 1995-2009(2014) Determination of organic compounds emitted from plastics－Gas chromatographic method
KS C 4203-1983 General-purpose high-voltage three-phase induction motor
KS M 5983-2004 Methods for determination of volatile organic compounds in paints and related products(Gas chromatographic method)
KS P ISO 8536-8:2017 Infusion equipment for medical use－Part 8：Infusion equipment for use with pressure infusion apparatus
KS P ISO 8536-8:2010 Infusion equipment for medical use-Part 8:Infusion equipment for use with pressure infusion apparatus
KS M ISO 20763:2011 Petroleum and related products-Determination of anti-wear properties of hydraulic fluids-Vane pump method
KS M ISO 20763:2014 Petroleum and related products-Determination of anti-wear properties of hydraulic fluids-Vane pump method
KS B ISO 17567-2014(2019) Agricultural and forestry tractors and implements – Hydraulic power beyond
KS B ISO 17567:2021 Agricultural and forestry tractors and implements —Hydraulic power beyond

U.S. Air Force

AIR FORCE QPL-83861-18-2003 FILTER ELEMENT, DISPOSABLE, FLUID PRESSURE, HYDRAULIC LINE, 5 AND 15 MICRON ABSOLUTE
AIR FORCE QPL-83860-21-2003 FILTER ELEMENTS, DISPOSABLE, FLUID PRESSURE, HYDRAULIC LINE, 5 MICRON ABSOLUTE
AIR FORCE QPL-5498-24-1991 ACCUMULATORS, AIRCRAFT HYDROPNEUMATIC PRESSURE

Institute of Electrical and Electronics Engineers (IEEE)

IEEE 252-1963 IEEE Proposed Procedure for Polyphase Induction Motors Having Liquid in the Magnetic Gap
IEEE No 252-1963 IEEE Proposed Procedure for Polyphase Induction Motors Having Liquid in the Magnetic Gap
IEEE 252-1995 Standard Test Procedure for Polyphase Induction Motors Having Liquid in the Magnetic Gap
IEEE Std 252-1977 IEEE Test Procedure for Polyphase Induction Motors Having Liquid in the Magnetic Gap
IEEE/IEC 60076-57-1202-2016 IEC/IEEE International Standard Power transformers --Part 57-1202: Liquid immersed phase-shifting transformers
IEC/IEEE 60076-57-1202:2017 Edition 1.0 2017-05 IEC/IEEE International Standard Power transformers --Part 57-1202: Liquid immersed phase-shifting transformers
IEEE Std 252-1995 IEEE Standard Test Procedure for Polyphase Induction Motors Having Liquid in the Magnetic Gap
IEEE P252/D2, June 2022 IEEE Draft Standard Test Procedure for Polyphase Induction Motors Having Liquid in the Magnetic Gap
IEEE P252/D3, September 2022 IEEE Approved Draft Standard Test Procedure for Polyphase Induction Motors Having Liquid in the Magnetic Gap
IEEE P252 IEEE Approved Draft Standard Test Procedure for Polyphase Induction Motors Having Liquid in the Magnetic Gap

Indonesia Standards

SNI 19-4956-1998 Test method for relative density, specific gravity and density (of homogeneous liquid)

IN-BIS

IS 8866-1978 The filling ratio of high-pressure liquefiable gas in the cylinder and the corresponding expansion pressure
IS 12202-1987 Glossary of terms related to fuel-fired appliances (pressure and non-pressure types)
IS 7469-1974 Advice on preferred capabilities of mechanical and hydraulic presses
IS 10532 Pt.2-1983 Specification for Fire-Resistant Hydraulic Fluids Part 2 Inverse Emulsion (Water-in-Oil) Type
IS 8775-1978 The filling pressure and corresponding expansion pressure of the permanent gas in the cylinder

CZ-CSN

CSN 35 1110-1980 Three-phase drv-type power transformers
CSN 35 1120-1976 Three-phasc oil powfr Iransformers
CSN 65 9705-1987 Organic pigments. Method of relative strength and stradě determination
CSN 07 8306-1974 essure vessels for aerosols and similar Iplications. Safety regulations

ESDU - Engineering Sciences Data Unit

ESDU 77016 A-1978 THE GRAVITATIONAL COMPONENT OF PRESSURE GRADIENT FOR TWO-PHASE GAS OR VAPOUR/LIQUID FLOW THROUGH STRAIGHT PIPES
ESDU 77016 B-2007 The gravitational component of pressure gradient for two-phase gas or vapour/liquid flow through straight pipes.
ESDU 76018 D-2007 The frictional component of pressure gradient for two-phase gas or vapour/liquid flow through straight pipes.
AERO W.S.02.03.02 B-1982 Theoretical lift-dependent drag of wings at supersonic speeds.
ESDU 89012-1989 TWO-PHASE FLOW PRESSURE LOSSES IN PIPELINE FITTINGS
ESDU 85017-1985 Thrust and drag accounting for propeller/airframe interaction.
ESDU 86017-1986 Propeller/body interaction for thrust and drag.
ESDU 78009-1978 A framework relating the drag-rise characteristics of a finite wing/body combination to the those of its basic aerofoil.

Standard Association of Australia （SAA）

AS 4621:2004 Regulators for use with liquefied petroleum - Vapour phase
AS 1580.454.1:2002 Paints and related materials - Methods of test - Resistance to mineral oil and other organic liquids
AS 1580.454.1:2002(R2013) Test methods for paints and related materials Resistance to mineral oils and other organic liquids
AS 1580.454.1:1992 Paints and related materials. Methods of test. Method 454.1: Resistance to mineral oil and other organic liquids

BE-NBN

NBN T 52-020-1990 Analyse van vloeibare aardoliekoolwaterstoffen - Gaschromatografische analyse - Bepaling van deorganische zuurstofverbindingen en van de organisch gebonden zuurstof met behulp van een zuurstof-specifieke detector (O-FID)
NBN E 82-001-1972 Helpful Practice Regulations Relating to Hot Molding, Nonferrous Metal Parts

RO-ASRO

STAS 10142-1975 EMULSION AND SOUND RECORD POSITIONS IX CAMERA AND PROJECTOR FOR 35 mm SOUND MOTION PICTURE FILMS
STAS 12474-1986 HYDRAULIC CUPPING PRESSES WITH SELFMOULDED TOOLS Specifications for geometrical accuracy
STAS 871/2-1990 Lubricants, industrial oils and related products. Mineral oils and hydraulic fluids. Classification and designation
STAS 11734-1980 DRAWING HYDRAULIC PRESSE Main parameters
STAS 10179-1980 Mechanical presses OPEN BED ECCENTRIC PRESSES Main parameters
STAS 11730-1980 BURRING HYDRAULIC PRESSE Main parameters

American Society for Testing and Materials (ASTM)

ASTM D8567-24 Standard Test Method for Analysis of Engine Coolant for Organic Additives by High Performance Liquid Chromatograph
ASTM D5534-94(1999) Standard Test Method for Vapor-Phase Rust-Preventing Characteristics of Hydraulic Fluids
ASTM D5534-94(2005) Standard Test Method for Vapor-Phase Rust-Preventing Characteristics of Hydraulic Fluids
ASTM D5534-94(2011)e1 Standard Test Method for Vapor-Phase Rust-Preventing Characteristics of Hydraulic Fluids
ASTM D4725-15(2023) Standard Terminology for Engine Coolants and Related Fluids
ASTM D1657-22e1 Standard Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Hydrometer

NO-SN

NS 5922-1981 Hydraulic fluid power - Filter elements - Verification of material compatibility with fluids

WRC - Welding Research Council

BULLETIN 368-1991 STRESSES IN INTERSECTING CYLINDERS SUBJECTED TO PRESSURE

American Welding Society (AWS)

WRC 368:1991 Stresses in Intersecting Cylinders Subjected to Pressure

Defense Logistics Agency

DLA MIL-P-45051 D NOTICE 1-1999 PRESS, CONNECTING ROD STRAIGHTENING, HYDRAULIC
DLA MIL-P-45051 D (1)-1986 PRESS, CONNECTING ROD STRAIGHTENING, HYDRAULIC
DLA MIL-P-45051 D-1985 PRESS, CONNECTING ROD STRAIGHTENING, HYDRAULIC

Lithuanian Standards Office

LST ISO 5675:2008 Agricultural tractors and machinery - General purpose quick-action hydraulic couplers (ISO 5675:2008, identical)
LST EN 14673-2006+A1-2010 Safety of machinery - Safety requirements for hydraulically powered open die hot forging presses for the forging of steel and non-ferrous metals

IT-UNI

UNI 1565-1566-1941 Nozzles, diaphragms and related standards for liquid flow measurement in circular cross-section delivery pipes. Diaphragms and associated pressure inlets
UNI 1563-1564-1941 Nozzles, diaphragms and related standards for liquid flow measurement in circular cross-section delivery pipes. Nozzles and associated pressure inlets
UNI 3167-1951 Railway tank car with fixed metal tank. For pressurized and unpressurized liquids
UNI 2324-1943 Venn-type tube flowmeter and related rules for measuring liquid flow in annular cross-section conduits. Venetian tube flow meters and related pressure outlets

TR-TSE

TS 3609-1981 HYDRAULIC FLUID POWER — FILTER ELEMANTS — VERIFICATION OF MATERIAL COMPATIBILITY WITH FLUIDS

International Federation of Trucks and Engines

NAVISTAR CEMS D-32-2013 Decorative Pressure Vapor Deposition (PVD) - Plastics

Society of Automotive Engineers (SAE)

SAE ARP1288A-1998 Placarding of Aircraft Hydraulic Equipment to Identify Phosphate Ester Fluid Compatibility
SAE AS408B-1991 PRESSURE INSTRUMENTS - FUEL, OIL and HYDRAULIC (RECIPROCATING ENGINE POWERED AIRCRAFT)

SAE - SAE International

SAE ARP1288A-1992 Placarding of Aircraft Hydraulic Equipment to Identify Phosphate Ester Fluid Compatibility
SAE ARP1288B-2012 Placarding of Aircraft Hydraulic Equipment to Identify Phosphate Ester Fluid Compatibility
SAE J1780/ HRP 4382-1991 Hydraulic System Diagrams and Associated Tables for Marine Vehicles

U.S. Military Regulations and Norms

ARMY MIL-P-12092 A (1)-1959 PRESS, LAMINATING, PHOTOGRAPHIC FM-30( )
ARMY MIL-P-12092 A-1957 PRESS, LAMINATING, PHOTOGRAPHIC FM-30( )

North Atlantic Treaty Organization Standards Agency

STANAG 3510-1992 THE PROVISION OF HYDRAULIC POWER FOR SERVICING AIRCRAFT HYDRAULIC SYSTEMS

Compressed Gas Association (U.S.)

CGA E-16-2008 Compressed gas check valves up to 3000 PSIG

SE-SIS

SIS SS-ISO 6547:1985 Hydraulic fluid power - Cylinders - Piston seal housings incorporating bearing rings - Dimensions and toler- ances
SIS SS-ISO 4399:1985 Fluid power systems and components — Connectors and associated components — Nominal pressures

American National Standards Institute （ANSI)

ANSI B11.2-2013(R2020) Safety Requirements for Hydraulic and Pneumatic Presses
ANSI Z21.18-2007 Gas Appliance Pressure Regulators (same as CSA 6.3)
ANSI Z21.93-2013 Excess Flow Valves for Natural and LP Gas up to Pressures of 5 PSIG, same as CSA 6.30

KR-KS

KS C 4203-2003(2023) General-purpose high-voltage three-phase induction motor
KS I ISO 6468-2021 Water quality ― Determination of certain organochlorine insecticides, polychlorinated biphenyls and chlorobenzenes ―Gas chromatographic method after liquid-liquid extraction
KS B ISO 17567-2021 Agricultural and forestry tractors and implements —Hydraulic power beyond