Method of dispensing mobile phase

Method of dispensing mobile phase, Total:353 items.

The international standard classification for "Method of dispensing mobile phase" includes: Ceramics in general , Protection against crime , Extraction and processing of petroleum and natural gas , Electrical equipment of ships and of marine structures , Inks. Printing inks , Motors , Generators , Rotating machinery in general , Cement. Gypsum. Lime. Mortar , Adhesives , Vibrations, shock and vibration measurements , Photographic equipment. Projectors , Tobacco, tobacco products and related equipment , Plastics in general , Wood-protecting chemicals , Reinforced plastics .

The Chinese standard classification for "Method of dispensing mobile phase" includes: Ceramic and glass in general , Daily use glass, ceramic, enamel and plastic products in general , Crime judging technology , Petroleum development , Electrical, observation/communication and navigation equipment for vessel in general , Printing Technology , Micro and copier machinery , Asynchronous machine , Micro machine , Cement , Basic standards and general methods for adhesives , Physics and Mechanics , Technical Management , Camera and photograph instrument , Power semiconductor device and parts , Tobacco , Basic standards and general methods for synthetic resin and plastic , Flow capacity and material level instrument , Coal tar processed products , Fibre reinforced composites .

Military Standard of the People's Republic of China-General Armament Department

GJB 1535-1992 Torpedo hydrodynamic test method
GJB 1808-1993 Calibration method of vacuum gauge dynamic flow method
GJB 2677-1996 Radar power distribution subsystem performance test method DC power supply, single-phase AC power supply
GJB 1535A-2021 Torpedo hydrodynamic test method
GJB 3091-1997 Radar power distribution subsystem performance test method three-phase AC power supply
GJB 1808-1993(XG1-2015) Calibration Method of Vacuum Gauge Dynamic Flow Method Modification Sheet 1-2015

Professional Standard - Light Industry

QB/T 1545-1992 Measurement Method for Relative Viscosity, Flowability and Thixotropy of Ceramic Slurry
QB/T 1545-2015 Test method for relative viscosity||relative liquidity and thixotropy of ceramic

Group Standards of the People's Republic of China

T/CASME 188-2022 Automatic assembly equipment for air conditioning throttle valve
T/CEC 226-2019 Test method for DC/DC converter of DC distribution grid
T/CAEE 028-2020 Electric vehicle AC charging pile assembly operation process specification
T/SEPA 001-2020 Commissioning method of phase selection and closing device in HVDC converter station
T/CAEE 029-2020 Electric vehicle DC charging pile assembly operation process specification
T/CWAN 0108-2024 Test procedures of fluidity for brazing filler metals

Professional Standard - Public Safety Standards

GA/T 1200-2014 Methods for examination of light distribution of evidence photography in forensic science
GA/T 1492-2018 Technical specifications for moving-light-configuration technique in Forensics

Professional Standard - Railway

TB/T 2539-1995 Test method for current distribution unevenness of diesel locomotive traction motor

Professional Standard - Petroleum

SY/T 5345-2007 Test method for relative permeability

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 31113-2014 Measurement of the resistance to flow for adhesive
GB/T 2419-2005 Test Method for Fluidity of Cement Mortar
GB/T 8128-2022 Test methods for single-phase series motors
GB/T 9651-2022 Test methods for single-phase induction motors
GB/T 1032-2012 Test procedures for three-phase induction motors
GB/T 8128-2008 Test procedures for single-phase series motors
GB/T 14624.3-1993 Test method for fluidity of printing inks
GB/T 2419-2005(英文版) Test method for fluidity of cement mortar
GB/T 13823.7-1994 Methods for the calibration of vibration and shock pick-ups Primary vibration calibration by comparison of phase angles
GB/T 9651-2008 Test procedures for single-phase induction motor
GB/T 8128-1987 Test procedure for single phase A.C.series motor
GB/T 21066-2007 Electrical installations of ships and mobile and fixed offshore units—Procedures for calculating short-circuit currents in three-phase a.c.
GB/T 14624.3-2008 Test method for fluidity of offset ink
GB/T 2419-1994 Test method for fluidity of cement mortar
GB/T 1032-2023 Iron ores—Determination of specific surface area—Test method using air-permeability apparatus (Blaine)
GB/T 9651-1988 Test procedure for single phase induction motor
GB 7369-1987 Carrier--Determination of flowability
GB/T 1032-2005 Test procedures for three-phase induction motors
GB/T 1032-1985 Test procedure for three-phase induction motors
GB/T 28912-2012 Test method for two phase relative permeability in rock

Professional Standard - Electron

SJ 3232.3-1989 Test method for fluidity of low-melting welding glass powder
SJ 453-1973 Methods of measurement for pulse peak of rectifying current of high-voltage rectifier tubes
SJ 1788-1981 Method of measurement for operational junction temperature of silicon single phase bridge rectifiers,up to 5A
SJ 2148-1982 Methods of measurement for dynamic impedance of silicon current regulator transistors
SJ 1791-1981 Method of measurement for insulation robustness of silicon single phase bridge rectifiers,up to 5A
SJ 2139-1982 Methods of measurement for dynamic impedance of silicon current regulator diodes
SJ 1785-1981 General procedures of measurement for silicon single phase bridge rectifiers,up to 5A
SJ 1790-1981 Method of measurement for overload current multiplication factor of silicon single phase bridge rectifiers,up to 5A
SJ 1786-1981 Method of measurement for forward voltage of silicon single phase bridge rectifiers,up to 5A

Professional Standard - Machinery

JB/T 6307.2-1992 Test Method for Power Semiconductor Module Single-phase Bridge Rectifier Diodes
JB/T 8250.6-1999 Vibration test method for cameras
JB/T 6307.3-1992 Test Method for Power Semiconductor Module Triphase Bridge Rectifier Diode

Professional Standard - Tobacco

YC/T 285-2009 Cigarettes—Determination of menthol in blending cut tobacco—Gas chromatographic method

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 40934-2021 Rotational moulding—Test method for powder flowability

Professional Standard - Water Conservancy

SL/T 232-1999 Verification method of dynamic liquid discharge and flow velocity facilities

Professional Standard - Aerospace

QJ 260-1977 器件

Professional Standard - Ferrous Metallurgy

YB/T 5173-1993 Test method for coal-tar-creosote - Determination of mobility

工业和信息化部

YB/T 5173-2016 Test method for coal-tar-creosote—Determination of mobility

Professional Standard - Post and Telecommunication

YD/T 2306-2011 Technical Requirements and Test Methods for DC Power Adapter Used in Vehicles and Interface for Mobile Telecommunication Terminal Equipment

未注明发布机构

JIS B 8390-1:2023 Pneumatic fluid power -- Determination of flow-rate characteristics of components using compressible fluids -- Part 1: General rules and test methods for steady-state flow

Professional Standard - Building Materials

JC/T 775-2004 Test method for resin flow of prepreg

国家市场监督管理总局

RB/T 017-2019 Evaluation methods and requirements of low carbon products - Three-phase distribution transformers

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc.

ASHRAE 120-2017 Method of Testing to Determine Flow Resistance of HVAC Ducts and Fittings
ASHRAE 4505-2002 Flow Boiling of CO2 with Miscible Oil in Microchannels

American National Standards Institute （ANSI)

ANSI/ASHRAE 120-2017 Method of Testing to Determine Flow Resistance of HVAC Ducts and Fittings
ANSI/ASHRAE 120-2022 Method of Testing to Determine Flow Resistance of HVAC Ducts and Fittings
ANSI/ASHRAE 120-2008 Method of Testing to Determine Flow Resistance of HVAC Ducts and Fittings
ANSI/NFPA T3.21.3-1990 Pneumatic Fluid Power - Flow Rating Test Procedure and Reporting Method - for Fixed Orifice Components
ANSI/AMCA 301-1965 METHOD OF PUBLISHING SOUND RATINGS FOR AIR MOVING DEVICES

Standard Association of Australia （SAA）

AS 1580.214.2:1990 Paints and related materials - Methods of test, Method 214.2: Consistency - Flow cup
AS 2341.3:2020 Methods of testing bitumen and related roadmaking products, Method 3: Determination of kinematic viscosity by flow through a capillary tube
AS K41.214.2:1970 Standard Methods of Test for Paints, Varnishes, Lacquers and Related Materials, Method 214.2: Consistency - Flow cup
AS 2341.3:1980 Methods of testing bitumen and related roadmaking products - Determination of kinematic viscosity by flow through a capillary tube
AS 2341.2:1980 Methods of testing bitumen and related roadmaking products - Determination of dynamic viscosity by flow through a capillary tube
AS 2341.2:1993 Methods of testing bitumen and related roadmaking products - Determination of dynamic (coefficient of shear) viscosity by flow through a capillary tube
AS 2331.1.4:1980 Methods of test for metallic and related coatings, Method 1.4: Local thickness tests - Eddy current method
AS C46:1927 Liquid starters for electric motors (D.C. and A.C. 3-phase induction with slip rings)
AS 1580.214.0:1990 Paints and related materials - Methods of test, Method 214.0: Rheological properties - Guide to test methods
AS K41.215.1:1970 Standard Methods of Test for Paints, Varnishes, Lacquers and Related Materials, Method 215.1: Levelling - Draw-down method
AS 2341.3:1993 Methods of testing bitumen and related roadmaking products - Determination of kinematic viscosity by flow through a capillary tube
AS 2891.3.1:1991 Methods of sampling and testing asphalt, Method 3.1: Bitumen content and aggregate grading - Reflux method
AS 1580.215.1:1975 Methods of test for paints, varnishes, lacquers and related materials (metric units), Method 215.1: Levelling - Draw-down method
AS 1580.214.2:1975 Methods of test for paints, varnishes, lacquers and related materials (metric units), Method 214.2: Consistency - Flow cup

GSO

BH GSO ISO 23309:2016 Hydraulic fluid power systems -- Assembled systems -- Methods of cleaning lines by flushing
GSO ISO 20637:2021 Infant formula and adult nutritionals — Determination of myo-inositol by liquid chromatography and pulsed amperometry
BH GSO ISO 20637:2022 Infant formula and adult nutritionals — Determination of myo-inositol by liquid chromatography and pulsed amperometry
BH GSO ISO 10583:2017 Aerospace fluid systems -- Test methods for tube/fitting assemblies
GSO ISO 4363:2013 Measurement of liquid flow in open channels -- Methods for measurement of characteristics of suspended sediment
GSO ISO 6358-1:2016 Pneumatic fluid power -- Determination of flow-rate characteristics of components using compressible fluids -- Part 1: General rules and test methods for steady-state flow
OS GSO ISO 6358-1:2016 Pneumatic fluid power -- Determination of flow-rate characteristics of components using compressible fluids -- Part 1: General rules and test methods for steady-state flow
BH GSO ISO 6358-1:2017 Pneumatic fluid power -- Determination of flow-rate characteristics of components using compressible fluids -- Part 1: General rules and test methods for steady-state flow
BH GSO ISO 20638:2022 Infant formula — Determination of nucleotides by liquid chromatography
GSO ISO 20638:2021 Infant formula — Determination of nucleotides by liquid chromatography
BH GSO ISO 6403:2016 Hydraulic fluid power -- Valves controlling flow and pressure -- Test methods
OS GSO ISO 6403:2015 Hydraulic fluid power -- Valves controlling flow and pressure -- Test methods
BH GSO ISO 4406:2023 Hydraulic Fluid Power — Fluids — Method for Coding the Level of Contamination by Solid Particles
GSO ASTM D5972:2016 Standard Test Method for Freezing Point of Aviation Fuels ( Automatic Phase Transition Method )
OS GSO ISO 6358-3:2016 Pneumatic fluid power -- Determination of flow-rate characteristics of components using compressible fluids -- Part 3: Method for calculating steady-state flow-rate characteristics of systems
GSO ISO 6358-3:2016 Pneumatic fluid power -- Determination of flow-rate characteristics of components using compressible fluids -- Part 3: Method for calculating steady-state flow-rate characteristics of systems
OS GSO ASTM D5972:2016 Standard Test Method for Freezing Point of Aviation Fuels ( Automatic Phase Transition Method )
BH GSO ISO 14164:2016 Stationary source emissions -- Determination of the volume flowrate of gas streams in ducts -- Automated method
OS GSO ISO 3722:2015 Hydraulic fluid power -- Fluid sample containers -- Qualifying and controlling cleaning methods
GSO 509:1994 Methods of test for Paints and Varnishes - Determination of time of how by use of flow cups.
BH GSO ISO 3722:2016 Hydraulic fluid power -- Fluid sample containers -- Qualifying and controlling cleaning methods
BH GSO ISO 6358-2:2017 Pneumatic fluid power -- Determination of flow-rate characteristics of components using compressible fluids -- Part 2: Alternative test methods
OS GSO ISO 6358-2:2016 Pneumatic fluid power -- Determination of flow-rate characteristics of components using compressible fluids -- Part 2: Alternative test methods
GSO ISO 14164:2015 Stationary source emissions -- Determination of the volume flowrate of gas streams in ducts -- Automated method
GSO ISO 6358-2:2016 Pneumatic fluid power -- Determination of flow-rate characteristics of components using compressible fluids -- Part 2: Alternative test methods
GSO ISO/TR 16806:2017 Pneumatic fluid power -- Cylinders -- Load capacity of pneumatic slides and their presentation method
OS GSO ISO/TR 16806:2017 Pneumatic fluid power -- Cylinders -- Load capacity of pneumatic slides and their presentation method
GSO ISO 6403:2015 Hydraulic fluid power -- Valves controlling flow and pressure -- Test methods

British Standards Institution (BSI)

BS ISO 13100:2024 Methods for zeta potential determination. Streaming potential and streaming current methods for porous materials
BS ISO 14164:1999 Stationary source emissions - Determination of the volume flowrate of gas streams in ducts - Automated method
23/30433745 DC BS ISO 13100. Methods for zeta potential determination. Streaming potential and streaming current methods for porous materials
BS ISO 20637:2015 Infant formula and adult nutritionals. Determination of myoinositol by liquid chromatography and pulsed amperometry
BS 2782-7 Method 720B:1979 Methods of testing plastics - Rheological properties - Cup flow of phenolic and alkyd moulding materials
BS ISO 6358-1:2013+A1:2020 Pneumatic fluid power. Determination of flow-rate characteristics of components using compressible fluids. General rules and test methods for steady-state flow
BS 1344-18:1981 Methods of testing vitreous enamel finishes - Determination of fluidity behaviour: fusion flow test
BS EN 16772:2016 Water quality. Guidance on methods for sampling invertebrates in the hyporheic zone of rivers
BS ISO 6358-2:2019 Pneumatic fluid power. Determination of flow-rate characteristics of components using compressible fluids - Alternative test methods
BS PD ISO/TS 17951-2:2016 Water quality. Determination of fluoride using flow analysis (FIA and CFA). Method using continuous flow analysis (CFA) with automated in-line distillation
BS ISO 20950-1:2018 Water quality. Determination of available weak and dissociable (WAD) cyanide - Method using ligand exchange, flow injection analysis (FIA), gas-diffusion and amperometric detection
BS 7275-3:1995 Determination of hydraulic fluid power motor characteristics. Method at constant flow and at constant torque
BS 3090:1978 Method of test for the determination of the cuprammonium fluidity of linen materials
BS ISO 10770-2:2012 Hydraulic fluid power. Electrically modulated hydraulic control valves. Test methods for three-port directional flow-control valves
BS EN 17550:2021 Animal feeding stuffs: Methods of sampling and analysis. Determination of carotenoids in animal compound feed and premixtures by high performance liquid chromatography. UV detection (HPLC-UV)
BS 4617:1983 Methods for determining the performance of pumps and motors for hydraulic fluid power transmission
PD ISO/TR 16806:2003 Pneumatic fluid power. Cylinders. Load capacity of pneumatic slides and their presentation method
BS PD ISO/TS 21354:2020 Measurement of multiphase fluid flow
BS EN ISO 8316:1997 Method of liquid flow in closed conduits. Method by collection of the liquid in a volumetric tank
BS EN ISO 19879:2021 Metallic tube connections for fluid power and general use. Test methods for hydraulic fluid power connections

American Society for Testing and Materials (ASTM)

ASTM D5125-10(2020)e1 Standard Test Method for Viscosity of Paints and Related Materials by ISO Flow Cups
ASTM C374-14(2018) Standard Test Methods for Fusion Flow of Porcelain Enamel Frits (Flow-Button Methods)
ASTM RR-D01-1157 2011 D7681-Test Method for Measuring Gradation of Glass Spheres Using a Flowing Stream Digital Image Analyzer
ASTM C374-70(1998) Standard Test Methods for Fusion Flow of Porcelain Enamel Frits (Flow-Button Methods)
ASTM C939/C939M-16 Standard Test Method for Flow of Grout for Preplaced-Aggregate Concrete (Flow Cone Method)
ASTM C374-14(2015)e1 Standard Test Methods for Fusion Flow of Porcelain Enamel Frits (Flow-Button Methods)
ASTM C374-70(2009) Standard Test Methods for Fusion Flow of Porcelain Enamel Frits (Flow-Button Methods)
ASTM C374-14 Standard Test Methods for Fusion Flow of Porcelain Enamel Frits 40;Flow-Button Methods41;
ASTM C939/C939M-22 Standard Test Method for Flow of Grout for Preplaced-Aggregate Concrete (Flow Cone Method)
ASTM C939/C939M-16a Standard Test Method for Flow of Grout for Preplaced-Aggregate Concrete (Flow Cone Method)
ASTM D2183-69 Method of Test for Flow Properties of Adhesives
ASTM C939-02 Standard Test Method for Flow of Grout for Preplaced-Aggregate Concrete (Flow Cone Method)
ASTM C939-97 Standard Test Method for Flow of Grout for Preplaced-Aggregate Concrete (Flow Cone Method)
ASTM C639-01 Standard Test Method for Rheological (Flow) Properties of Elastomeric Sealants
ASTM C639-95 Standard Test Method for Rheological (Flow) Properties of Elastomeric Sealants
ASTM C639-15(2020) Standard Test Method for Rheological (Flow) Properties of Elastomeric Sealants
ASTM E3199-22 Standard Guide for Alternative Allocation Approaches to Modeling Input and Output Flows of Secondary Materials and Related Recycling Scenarios in Life Cycle Assessment
ASTM E3199-22a Standard Guide for Alternative Allocation Approaches to Modeling Input and Output Flows of Secondary Materials and Related Recycling Scenarios in Life Cycle Assessment
ASTM E319-85(1997) Standard Practice for the Evaluation of Single-Pan Mechanical Balances
ASTM C639-15 Standard Test Method for Rheological (Flow) Properties of Elastomeric Sealants
ASTM C639-01(2007) Standard Test Method for Rheological (Flow) Properties of Elastomeric Sealants
ASTM C639-01(2011) Standard Test Method for Rheological (Flow) Properties of Elastomeric Sealants
ASTM RR-D19-1173 2002 D6888-Test Method for Available Cyanides with Ligand Displacement and Flow Injection Analysis (FIA) Utilizing Gas Diffusion Separation and Amperometric Detection
ASTM D6449-99(2015) Standard Test Method for Flow of Fine Aggregate Concrete for Fabric Formed Concrete (Flow Cone Method)
ASTM C939-10 Standard Test Method for Flow of Grout for Preplaced-Aggregate Concrete (Flow Cone Method)
ASTM D5125-10 Standard Test Method for Viscosity of Paints and Related Materials by ISO Flow Cups
ASTM C1437-20 Standard Test Method for Flow of Hydraulic Cement Mortar
ASTM C1437-01 Standard Test Method for Flow of Hydraulic Cement Mortar
ASTM D7743-12 Standard Test Method for Measuring the Minimum Fluidization Velocities of Free Flowing Powders
ASTM D6351-22 Standard Test Method for Determination of Low Temperature Fluidity and Appearance of Hydraulic Fluids
ASTM D6042-23 Standard Test Method for Determination of Phenolic Antioxidants and Erucamide Slip Additives in Polypropylene Homopolymer Formulations Using Liquid Chromatography (LC)
ASTM D5972-15 Standard Test Method for Freezing Point of Aviation Fuels (Automatic Phase Transition Method)
ASTM D5972-05 Standard Test Method for Freezing Point of Aviation Fuels (Automatic Phase Transition Method)
ASTM D5972-23 Standard Test Method for Freezing Point of Aviation Fuels (Automatic Phase Transition Method)
ASTM C1437-07 Standard Test Method for Flow of Hydraulic Cement Mortar
ASTM D4305-98a Standard Test Method for Filter Flow of Aviation Fuels at Low Temperatures
ASTM D4525-13e2 Standard Test Method for Permeability of Rocks by Flowing Air
ASTM C1437-99 Standard Test Method for Flow of Hydraulic Cement Mortar
ASTM D7346-07 Standard Test Method for No Flow Point of Petroleum Products
ASTM C1437-13 Standard Test Method for Flow of Hydraulic Cement Mortar
ASTM D5972-16 Standard Test Method for Freezing Point of Aviation Fuels (Automatic Phase Transition Method)
ASTM F778-88(2007) Standard Methods for Gas Flow Resistance Testing of Filtration Media
ASTM C374-70(2004)e1 Standard Test Methods for Fusion Flow of Porcelain Enamel Frits (Flow-Button Methods)
ASTM D8070-21 Standard Test Method for Screening of Fuels and Fuel Associated Aqueous Specimens for Microbial Contamination by Lateral Flow Immunoassay
ASTM C1362-97(2002) Standard Test Method for Flow of Freshly Mixed Hydraulic Cement Concrete
ASTM D8070-19 Standard Test Method for Screening of Fuels and Fuel Associated Aqueous Specimens for Microbial Contamination by Lateral Flow Immunoassay
ASTM D8070-19a Standard Test Method for Screening of Fuels and Fuel Associated Aqueous Specimens for Microbial Contamination by Lateral Flow Immunoassay
ASTM D6449-99(2008) Standard Test Method for Flow of Fine Aggregate Concrete for Fabric Formed Concrete (Flow Cone Method)

ESDU - Engineering Sciences Data Unit

FMI2 B-2007 Guide to the flow relationships and statistical methods used in the Data Items on two-phase flow pressure gradients in straight pipes.
ESDU 89012-1989 TWO-PHASE FLOW PRESSURE LOSSES IN PIPELINE FITTINGS
FMI2 A-1978 GUIDE TO THE FLOW RELATIONSHIPS AND STATISTICAL METHODS USED IN THE DATA ITEMS ON TWO-PHASE FLOW PRESSURE GRADIENTS IN STRAIGHT PIPES
ESDU 89012 A-2007 Two-phase flow pressure losses in pipeline fittings. (Reprinted with Amendment A)
ESDU 91021-1991 A method of estimating a flow breakdown boundary for aerofoils and swept wings in transonic flow.
ESDU 82021 A-1983 Pressure loss and heat transfer for single-phase turbulent flow in roughened channels: methods of calculation.

IN-BIS

IS 3944-1982 How to measure flow time using a flow cup
IS 9209-1979 Test method for compatibility of aerosol products with metal aerosol dispensers
IS 722 Pt.3-1977 Specification for alternating current meters Part III Three-phase full-current and transformer-driven and single-phase transformer-driven power meters Class 2

SE-SIS

SIS SS-ISO 5221:1988 Air distribution and air diffusion — Rules to methods of measuring air flow r?te in an air handling duct
SIS SEN 01 25 05-1963 Graphical symbols Kind oj current, distribution systems, methods of connection

Indonesia Standards

SNI 13-6605-2001 Test methods for fluid flow geothermal wells
SNI 19-4199-1996 Measurement of fluid flow in open channels - Methods for measurement of suspended sediment
SNI 03-6431-2000 Test methods for flow time of fiber-reinforced concrete through inverted slump cone
SNI 09-1260-1989 Disc clutch assembly for motor vehicles, Test method

Lithuanian Standards Office

LST ISO 14164:2001 Stationary source emissions - Determination of the volume flowrate of gas streams in ducts - Automated method (identical ISO 14164:1999)

SCC

DANSK DS/ISO 13100:2024 Methods for zeta potential determination – Streaming potential and streaming current methods for porous materials
CAN/CGSB-3.0 No. 140.1-2005 Methods of Testing Petroleum and Associated ProductsLow Temperature Flow Test (LTFT) for Diesel Fuels
CAN/CGSB-3.0 Nº 140.1-2017 Methods of Testing Petroleum and Related Products - Low Temperature Flow Test (LFTT) of Diesel Fuels
CAN/CGSB-3.0 No./No.140.1-M88-1988 Methods of Testing Petroleum and Associated Products Low Temperature Flow Test (LTFT) for Diesel Fuels
CAN/CGSB-3.0 No. 140.1-2017 Methods of testing petroleum and associated products - Low temperature flow test (LTFT) for diesel fuels
CAN/CGSB 3.0 No.140.1-2005 Methods of Testing Petroleum and Associated Products - Low Temperature Flow Test (LTFT) for Diesel Fuels
CAN/CGSB-3.0 No.140.1-1995 Methods of Testing Petroleum and Associated ProductsLow Temperature Flow Test (LTFT) for Diesel Fuels
CAN/CGSB-3.0 No. 140.1-2022 Methods of testing petroleum and associated products - Low temperature flow test (LTFT) for diesel fuels
AENOR UNE 21320-20:1976 PRESCRIPTIONS FOR FLUID OILS FOR CABLES
ASHRAE 120-2022 Standard 120-2022 -- Method of Testing to Determine Flow Resistance of HVAC Ducts and Fittings (ANSI Approved)
VDI 3595-1999 Methods for the allocation of operating areas and resources in accordance with material flow
NS 4170:2008 Flow of person-related information in education
BS 4559-5.3:1987 Methods for preparation of calibration gas mixtures. Dynamic volumetric methods-Periodic injections into a flowing gas stream
ASD-STAN TR 3634:1970 Fluid fittings, flanged - Assembly recommendations
AWWA JAW61919 Journal AWWA — Numerical Methods for Modeling Transient Flow in Distribution Systems
BS M 53:1983 Method for thermal shock testing of pipes and fittings for aerospace fluid systems
BS 3900-A6:1986 Methods of test for paints-Determination of flow time by use of flow cups
CAN/CGSB-3.0 Nº 140.1-2022 CanadaTest Methods for Petroleum and Related Products – Low Temperature Flow Test (LFTT) of Diesel Fuels
BS 6277:1982 Method for determination of pressure drop/flow characteristics of hydraulic fluid power filters
DANSK DS/ISO 6403:1991 Hydraulic fluid power - Valves controlling flow and pressure - Test methods
DIN ISO 4548-7:1993 Internal combustion engines; methods of test for full-flow lubricating oil filters; vibration fatigue test; identical with ISO 4548-7:1990
DANSK DS/ISO 19879:2021 Metallic tube connections for fluid power and general use – Test methods for hydraulic fluid power connections
BS 7044-2-2.2:1989 Artificial sports surfaces. Methods of test-Methods for determination of Person/surface interaction
VDI/VDE 2176-2007 Flow characteristics of control valves and their determination
AWWA ACE61605 Managing Watershed Activities Using an Integrated Approach
DANSK DS/ISO 14164:1999 Stationary source emissions - Determination of the volume flowrate of gas streams in ducts - Automated method
BS 684-1.4:1976 Methods of analysis of fats and fatty oils. Physical methods-Determination of flow and drop points
BS 4062-1:1982 Valves for hydraulic fluid power systems-Methods for determining pressure differential/flow characteristics
DANSK DS/EN 17550:2022 Animal feeding stuffs: Methods of sampling and analysis – Determination of carotenoids in animal compound feed and premixtures by high performance liquid chromatography – UV detection (HPLC-UV)
DANSK DS/ISO 20950-1:2018 Water quality – Determination of available weak and dissociable (WAD) cyanide – Part 1: Method using ligand exchange, flow injection analysis (FIA), gas-diffusion and amperometric detection
NS-EN 17550:2021 Animal feeding stuffs: Methods of sampling and analysis - Determination of carotenoids in animal compound feed and premixtures by high performance liquid chromatography - UV detection (HPLC-UV)
NACE SP0116-2022 Multiphase Flow Internal Corrosion Direct Assessment (MP-ICDA) Methodology for Pipelines
BS 894:1940 The determination of the flow and drop points of fats and allied substances. (apparatus and method of use)
NS-EN 16772:2016 Water quality — Guidance on methods for sampling invertebrates in the hyporheic zone of rivers
DANSK DS/EN 16772:2016 Water quality – Guidance on methods for sampling invertebrates in the hyporheic zone of rivers
AENOR UNE-EN 16772:2016 Water quality. Guide to methods for sampling invertebrates in the hyporheic zone of rivers.
BS EN ISO 19879:2005 Metallic tube connections for fluid power and general use. Test methods for hydraulic fluid power connections
BS PD ISO/TR 16806:2003 Pneumatic fluid power. Cylinders. Load capacity of pneumatic slides and their presentation method

Canadian General Standards Board （CGSB)

CAN/CGSB-3.0 NO.140.1-2005 Methods of Testing Petroleum and Associated Products Low Temperature Flow Test (LTFT) for Diesel Fuels
CAN/CGSB-3.0 NO.140.1-2017 Methods of Testing Petroleum and Associated Products Low Temperature Flow Test (LTFT) for Diesel Fuels
CGSB 3.0 NO. 140.1-05-CAN/CGSB-2005 M閠hodes d抏ssai des produits p閠roliers et produits connexes Essai d'閏oulement ?basse temp閞ature (E葿T) des combustibles diesels
CGSB 1-GP-71 METH 36.1-1981 Methods of Testing Paints and Pigments Slumping

Korean Agency for Technology and Standards (KATS)

KS F 2410-1977 TESTING METHOD FOR FLOW OF CONCRETE BY THE flow board
KS B 6931-2005 Pneumatic fluid power-Determination of flow-ratecharacteristics of pneumatic control valves
KS L 1626-2017 Testing method for flowability of fine ceramic powders
KS M 2963-2008 Test method for determination of components in petroleum products by gas chromatography
KS L 1626-2022 Testing method for flowability of fine ceramic powders
KS B ISO 6403-2004(2009) Hydraulic fluid power－Valves controlling flow and pressure－Test methods
KS B ISO 6072-2013 Hydraulic fluid power－Compatibility between elastomeric materials and fluids
KS R 1034-2006 Vibration testing methods for automobile parts
KS F 2594-2009 Method of test for slump flow of fresh concrete
KS L 1626-2012 Testing method for flowability of fine ceramic powders
KS B ISO 6403-2013 Hydraulic fluid power－Valves controlling flow and pressure－Test methods
KS F 2393-2009 Standard test method for rheological properties of asphalt binder using dynamic shear rheometer
KS M 2035-1990(1995) TESTING METHOD FOR WATER CONTENT IN LUBRICATING GREASE
KS M 2035-1985 TESTING METHOD FOR WATER CONTENT IN LUBRICATING GREASE
KS L 1626-2017(2022) Testing method for flowability of fine ceramic powders
KS M 3004-2013 Testing method for flow properties of thermoplastics with a capillary rheometer
KS B ISO 6072-2002(2012) Hydraulic fluid power－Compatibility between elastomeric materials and fluids
KS E 3702-1982 METHODS FOR SAMPLING AND DETERMINATION OF TOTAL MOISTURE AND ADHERENT MOISTURE OF COAL AND COKE
KS M 3070-2013 Testing method for melt flow rate of thermoplastics
KS E 3702-1982(2002) METHODS FOR SAMPLING AND DETERMINATION OF TOTAL MOISTURE AND ADHERENT MOISTURE OF COAL AND COKE
KS B ISO 3722-2022 Hydraulic fluid power－Fluid sample containers－Qualifying and controlling cleaning methods
KS C 4201-2002 Testing methods of three-phase induction motor characteristics

PT-IPQ

NP EN 491-2000 Concrete roofing tiles and fittings Test methods
NP EN ISO 12870:2000 Ophthalmic optics Spectacle frames General requirements and test methods(ISO 12870-1997)
NP 2881-1984 Circuit insulation materials and related accessories. Insulating enclosures used in electronic equipment, related test methods

International Organization for Standardization (ISO)

ISO 20637:2015 Infant formula and adult nutritionals — Determination of myo-inositol by liquid chromatography and pulsed amperometry
ISO 20638:2015 Infant formula — Determination of nucleotides by liquid chromatography
ISO/DIS 10583:1990 Aerospace fluid systems — Test methods for tube/fitting assemblies
ISO 1306:1987 Rubber compounding ingredients; Carbon black (pelletized); Determination of pour density
ISO 8332:1993 Rubber compounding ingredients; sulfur; methods of test
ISO 6358-1:2013/Amd 1:2020 Pneumatic fluid power — Determination of flow-rate characteristics of components using compressible fluids — Part 1: General rules and test methods for steady-state flow — Amendment 1: Effective condu

European Committee for Standardization (CEN)

EN 535:1991 Paints and varnishes; determination of flow time by use of low cups (ISO 2431:1984 modified)

VDI - Verein Deutscher Ingenieure

VDI 3595-1974 Methods for coordination of manufacturing plants and working funds according with material-flow
VDI 3595-1997 Methods for coordination of manufacturing plants and working funds according with material-flow
VDI/VDE 2176 Blatt 1-1971 Fluidic characteristic quantities of throttle valves and their determination

RU-GOST R

GOST 27860-1988 Machine parts. Measurement of wear
GOST 17069-1971 Hydrodynamic transmission. Methods of stand tests
GOST 10921-1990 Radial and axial fans. Aerodynamic testing methods
GOST 2.420-1969 Unified system for design documentation. Simplified representation of rolling bearings on assembly drawings
GOST 31537-2012 Wheelset assembly for locomotives and motor-powered units using shrink fit method. Typical technological process
GOST 19438.12-1975 Low-power electronic tubes and valves. Methods of measurement of plate current and currents of grids having positive potential

Association Francaise de Normalisation

NF ISO 20637:2016 Infant formulas and nutritional products for adults - Determination of myo-inositol content by liquid chromatography and pulse amperometry
NF ISO 6358-2:2020 Pneumatic transmissions - Determination of flow characteristics of components through which a compressible fluid passes - Part 2: alternative test methods
NF ISO 6358-3:2015 Pneumatic transmissions - Determination of the flow characteristics of components crossed by a compressible fluid - Part 3: method of calculating stationary flow characteristics of assemblies
FD E48-697*FD ISO/TR 10686:2014 Hydraulic fluid power - Method to relate the cleanliness of a hydraulic system to the cleanliness of the components and hydraulic fluid that make up the system
FD E48-154:2002 Hydraulic fluid power - Test method for determinating the flowrate performances of hydro-pneumatic accumulators
NF EN 45559:2019 Method of communicating information on the rational use of materials in energy-related products
NF ISO 10094-2:2022 Pneumatic transmissions - Electro-pneumatic distribution devices with continuous pressure control - Part 2: test methods to determine the main characteristics to be included in suppliers' documentation
NF E49-160-2*NF ISO 6358-2:2020 Pneumatic fluid power - Determination of flow-rate characteristics of components using compressible fluids - Part 2 : alternative test methods
NF EN 27842:1992 Automatic steam traps - Determination of flow rate - Test methods
NF V03-188*NF ISO 20638:2016 Infant formula - Determination of nucleotides by liquid chromatography
NF ISO 20638:2016 Infant formulas - Determination of nucleotide content by liquid chromatography
NF ISO 6358-1:2013 Pneumatic transmissions - Determination of the flow characteristics of components crossed by a compressible fluid - Part 1: general rules and test methods in steady state
NF E49-160-3*NF ISO 6358-3:2015 Pneumatic fluid power - Determination of flow-rate characteristics of components using compressible fmuids - Part 3 : method for calculating steady-state flow-rate characteristics of systems
NF T90-772*NF EN 16772:2016 Water quality - Guidance on methods for sampling invertebrates in the hyporheic zone of rivers
NF EN 16772:2016 Water quality - Guidelines for sampling methods for invertebrates in the hyporheic zone of rivers

Japanese Industrial Standards Committee (JISC)

JIS Z 2502:1979 Method for determination of flow rate of metal powders
JIS K 0126:1989 General rules for flow injection analysis
JIS K 0126:2001 General rules for flow injection analysis
JIS C 4207:1995 Calculating methods of three-phase induction motor characteristics
JIS B 9933:2021 Hydraulic fluid power -- Fluids -- Method for coding the level of contamination by solid particles
JIS B 8348:2002 Hydraulic fluid power -- Pumps and motors -- Test methods
JIS A 1159:2018 Method of test for J-Ring flow of concrete

Spanish Association for Standardization (UNE)

UNE 118027:2007 Tobacco and tobacco products. Determination of nitrates. Analysis methods by continuos flow and liquid cromatography.
UNE 118027:2013 Tobacco and tobacco products. Determination of nitrates. Analysis methods by continuos flow and liquid cromatography.
UNE 118025:2005 Tobacco and tobacco products. Determination of amonnium content in tobacco. Analysis methods by continuos flow and liquid cromatography.
UNE 118025:2014 Tobacco and tobacco products. Determination of ammonium content in tobacco. Analysis methods by continuous flow and liquid chromatography.
UNE-EN ISO 19879:2022 Metallic tube connections for fluid power and general use - Test methods for hydraulic fluid power connections (ISO 19879:2021)
UNE 118003:2002 Cigarettes. Determination of nicotine in main stream smoke. Analytical method by gas chromatography.
UNE 118026:2006 Cigarettes. Determination of menthol in mainstream smoke. Analysis method by gas chromatography.
UNE 77227:2001 Stationary source emissions. Determination of the volume flowrate of gas stream in ducts. Automated method.

RO-ASRO

STAS 8949-1982 STEELS FOR ASSEMBLY ELEMENTS MANUFAGTURE BY HOT FLOW
SR 7246-1998 Three phase asynchronous motors. Test methods
SR 7246/C1-1999 Three phase asynchronous motors. Test methods
STAS 8476-1969 Electric motor. Three-phase asynchronous motors from 160 to 1000kw. Assembly dimensions
STAS 9917-1974 Hydroslatic drives DEVICES Mcthods of testing
SR ISO 4406:1987 Hydraulic fluid power - Fluids - Method for coding level of contamination by solid particles
STAS 7246/5-1974 ASYNCHRONOUS THREEPHASE MOTORS Test methods No-load test

BSI

BS 140:1923 Liquid starters for electric motors (d.c and a.c-phase 3 induction with slip rings)

Australian/New Zealand Standard (AU-AS/NZS)

AS/NZS 1462.6:1998 Methods of test for plastics pipes and fittings Method 6: Method for hydrostatic pressure testing of pipes

National Aeronautics and Space Administration (NASA)

NASA-TN-D-7921-1975 Subsonic aerodynamic characteristics of interacting lifting surfaces with separated flow around sharp edges predicted by a vortex-lattice method

CZ-CSN

CSN 65 4826-1982 Fertilizers. Method for the determination of free flowlng property
CSN 36 7000-1988 Safety requirement and test methods formains operated electronic and related equipment for household and similar egneral use

VN-TCVN

TCVN 7433-1-2004 Thermoplastics pipes and fittings.Determination of melt mass-flow rate.Part 1: Test method

AR-IRAM

IRAM 2125-1958 General test methods for polyphase induction type electric engines
IRAM 10503-1958 Method for determination of relative specific mass of stirred soil
IRAM 5553-1952 Method for determination of animal fat loss after heating

European Association of Aerospace Industries

AECMA PREN 3633-1992 Aerospace Series Installation Hole for Fluid Fittings, Flanged Edition P 1

GM Daewoo

GMKOREA EDS-T-7704-2011 Test Method for Equilibrium Reflux Boiling Point of Brake Fluid

GOSTR

GOST 10921-2017 Radial and axial fans. Methods of aerodynamic tests

International Telecommunication Union (ITU)

ITU-R INFORME M.901-2 SPANISH-1990 FREQUENCY ASSIGNMENT METHODS FOR TRUNKED MOBILE RADIO SYSTEMS
ITU-R REPORT 901-2-1990 FREQUENCY ASSIGNMENT METHODS FOR TRUNKED MOBILE RADIO SYSTEMS
ITU-R 901-2 SPANISH-1990 FREQUENCY ASSIGNMENT METHODS FOR TRUNKED MOBILE RADIO SYSTEMS M蒚ODOS DE ASIGNACI覰 DE FRECUENCIAS PARA SISTEMAS DE CONCENTRACI覰 DE ENLACES DEL SERVICIO M覸IL
ITU-R RAPPORT M.901-2 FRENCH-1990 FREQUENCY ASSIGNMENT METHODS FOR TRUNKED MOBILE RADIO SYSTEMS

HU-MSZT

MNOSZ 11205-1952 Pressure Gauge Accessories Flow, Pressure Gauge
MNOSZ 5245-1953 Water transportation pipeline accessories. side flow

German Institute for Standardization

DIN 14680:2007 Hand-operated cable reels - A.C., three-phase A.C. and D.C.
DIN EN ISO 19879:2021-06 Metallic tube connections for fluid power and general use - Test methods for hydraulic fluid power connections (ISO 19879:2021); German version EN ISO 19879:2021
DIN 14680-2:1984 Hand-operated cable reels for a.c. and three-phase a.c.
DIN ISO 10583:1998-04 Aerospace fluid systems - Test methods for tube/fitting assemblies (ISO 10583:1993)
DIN EN 17550:2020 Animal feeding stuffs: Methods of sampling and analysis - Determination of carotenoids in animal compound feed and premixtures by high performance liquid chromatography - UV detection (HPLC-UV); German and English version prEN 17550:2020

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE)

ASHRAE 41.8-1989 Standard Methods of Measurement of Flow of Liquids in Pipes Using Orifice Flowmeters
ASHRAE NA-04-4-1-2004 Distribution of Cooling Airflow in a Raised-Floor Data Center

South African Bureau of Standard

SANS 1051-6:2006 Braking Part 6: Distribution of braking effort and compatibility of vehicles in combination

Society of Automotive Engineers (SAE)

SAE J2025-1989 Method for Evaluating the Flow Properties of Pumpable Sealers

SAE - SAE International

SAE J2025-2021 Method for Evaluating the Flow Properties of Pumpable Sealers@ Recommended Practice

ITU-R - International Telecommunication Union/ITU Radiocommunication Sector

REPORT M.901-2-1990 FREQUENCY ASSIGNMENT METHODS FOR TRUNKED MOBILE RADIO SYSTEMS

Danish Standards Foundation

DS/ISO 19879:2021 Metallic tube connections for fluid power and general use – Test methods for hydraulic fluid power connections
DS/ISO 14164:1999 Stationary source emissions - Determination of the volume flowrate of gas streams in ducts - Automated method
DS/ISO 4406:2021 Hydraulic fluid power – Fluids – Method for coding the level of contamination by solid particles

NO-SN

NS 5911-1988 Hydraulic fluid power - Fluids - Method for coding level of contamination by solid particles
NS 5922-1981 Hydraulic fluid power - Filter elements - Verification of material compatibility with fluids

IT-UNI

UNI ISO 6358-2:2020 Pneumatic fluid power -- Determination of flow-rate characteristics of components using compressible fluids - Part 2: Alternative test methods

CO-ICONTEC

ICONTEC 1775-1982 Related Class C tests for mechanical products, centrifugal pumps, axial flow pumps and mixed flow pumps
ICONTEC 1490-1979 Related accessories for single-phase transformers

DIN

DIN 14680:2016 Firefighting and fire protection - Hand-operated cable reels - A.C., three-phase A.C. and D.C.
DIN 14680:2018 Firefighting and fire protection - Hand-operated cable reels - A.C., three-phase A.C. and D.C.

U.S. Military Regulations and Norms

ARMY MIL-T-52914 B-1990 TOOL OUTFIT, HYDRAULIC SYSTEMS TEST AND REPAIR, MOBILE

Others: Method of dispensing mobile phase