Incremental testing vs. non-incremental

Incremental testing vs. non-incremental, Total:403 items.

The international standard classification for "Incremental testing vs. non-incremental" includes: Products of the chemical industry in general , Data communication networks , Surface active agents , Hoses and hose assemblies , Solvents , Reinforced plastics , Textile glass materials , Soil quality and pedology in general , Materials for the reinforcement of composites in general , Chemical analysis , Textile and leather technology (Vocabularies) .

The Chinese standard classification for "Incremental testing vs. non-incremental" includes: Basic standards and general methods for dye , Data communication equipment , Chemical additive , Rubber tube, rubber belt and tape , Basic standards and general methods for chemical additive , Fibre reinforced composites , Glass fibre , Soil and fertilizer in general , Technical Management , Basic standards and general methods for synthetic resin and plastic .

Taiwan Provincial Standard of the People's Republic of China

CNS 14935-2005 Measurement of amplifier power gain and noise figure

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 3855-1983 Test method for resin content of carbon fiber reinforced plastics
GB/T 2577-2005 Test method for resin content of glass fiber reinforced plastics
GB/T 38339-2019 Determination of phosphorus content in fluorescent brightener products
GB/T 1669-2001 Plasticizers--Determination of mass loss on heating
GB/T 5565.3-2017 Rubber and plastics hoses and tubing--Measurement of flexibility and stiffness--Part 3: Bending tests at high and low temperatures
GB/T 9914.3-2013 The Method for Reinforcement Products - Part 3: Determination of Mass Per Unit Area
GB/T 1665-1995 Plasticizers--Determination of saponification value and ester-content
GB/T 3365-2008 Carbon fiber reinforced plastics - Determination of void content and fiber volume content
GB/T 5565.1-2017 Rubber and plastics hoses and tubing--Measurement of flexibility and stiffness--Part 1: Bending tests at ambient temperatures
GB/T 1665-2008 Plasticizers - Determination of saponification value and ester-content
GB/T 42489-2023 Soil quality—Decision unit-multi increment sampling method
GB/T 2577-1989 Test method for resin content of glass fiber reinforced plastics
GB/T 5565-2006 Rubber or plastics hoses tubing - Bending tests
GB/T 9914.3-2001 method for reinforcement products-Part 3: Determination of mass per unit area
GB/T 39249-2020 Rubber and plastics hoses and tubing-Textile-reinforced types- Sub-ambient temperature crush test
GB/T 13428-1992 Methods of measurement for the delta modulation equipment
GB/T 3366-1996 Test method for fiber volume content of carbon fiber reinforced plastics
GB/T 3855-2005 Test method for resin content of carbon fiber reinforced plastics
GB 3855-1983 Test method for resin content of carbon fiber reinforced plastics
GB/T 29598-2013 Limit and determination of triazines in fluorescent brighteners
GB/T 36908-2018(英文版) Limit and determination of sensitizing dyes in dye products
GB/T 5565.2-2017 Rubber and plastics hoses and tubing--Measurement of flexibility and stiffness--Part 2: Bending tests at sub-ambient temperatures

Professional Standard - Electron

SJ 2534.10-1986 Test procedures for antennas - Measurement of power gain and directivity

Chongqing Provincial Standard of the People's Republic of China

DB50/T 35-2001 Added arable land quality

Professional Standard - Chemical Industry

HG/T 2997-1979(1997) Determination of weight gain of cloth after painting
HG/T 2751-1996 Determination of Water Content of Non-plasticised Cellulose Acetate

Professional Standard - Ferrous Metallurgy

YB/T 6261-2024 Determination of Nitrogen Content in Carbon Additive Formaldehyde Method

Professional Standard - Agriculture

药典63-2014 Quality Standards for Xiaoer Zengshi Granules
NY/T 4428-2023 Fertilizer synergists—Determination of P-hydroquinone content
NY/T 2877-2015 Fertilizer synergists-Determination of dicyandiamide content

Professional Standard - Building Materials

JC/T 287-2010 Test methods for void content of fibre reinforced plastics

Group Standards of the People's Republic of China

T/CERS 0008-2020 Code for planning of new authorized distribution power grid
T/SUCA 037-2022 Methods of Measurement for Main Characteristics of Electronic Sound Field Enhancement System
T/ZSA 8-2020 Additive manufacturing- Test method- Non-destructive method for metal parts produced by directed energy deposition
T/GAMA 04-2020 Plasma additive compound milling and material cutting equipment and process quality control
T/GAMA 01-2020 Laser selective melting metal additive manufacturing equipment and quality control
T/CTES 1019-2019 Determination of weighting agent content in silk - Thermogravimetry

未注明发布机构

FORD M6C54-A-1987 HYDRAULIC FLUID - HIGH WATER CONTENT, THICKENED

Military Standard of the People's Republic of China-General Armament Department

GJB 5814-2006 Testing method of X-ray dose enhancement effect for military electronic devices

Professional Standard - Aviation

HB 8747-2023 Requirements oftest report format and data for aero additive manufacturing

Professional Standard - Aerospace

QJ 3308-2008 Instrumentation Method for Volume Increase for Filament-wound Case of Solid Rocket Motor

German Institute for Standardization

DIN 8061:1994-08 Unplasticized polyvinyl chloride pipes - General quality requirements and testing
DIN 8061:2009-10 Unplasticized polyvinyl chloride (PVC-U) pipes - General quality requirements and testing
DIN 55477:1990-11 Packaging; non-reinforced and reinforced plastic tapes; requirements and testing
DIN 53163:2018-02 Pigments and extenders - Determination of lightness of extenders and white pigments in powder form
DIN EN ISO 3344:1997 Reinforcement products - Determination of moisture content (ISO 3344:1997); German version EN ISO 3344:1997
DIN 53163:2017 Pigments and extenders - Determination of lightness of extenders and white pigments in powder form
DIN 53163 E:2017 Draft Document - Pigments and extenders - Determination of lightness of extenders and white pigments in powder form
DIN 55477:1990 Packaging; non-reinforced and reinforced plastic tapes; requirements and testing
DIN 55477 E:2008-11 Packaging; non-reinforced and reinforced plastic tapes; requirements and testing
DIN EN ISO 3262-21:2022-10 Extenders - Specifications and methods of test - Part 21: Silica sand (unground natural quartz) (ISO/DIS 3262-21:2022); German and English version prEN ISO 3262-21:2022 / Note: Date of issue 2022-09-09*Intended as replacement for DIN EN ISO 3262-21 (20...
DIN EN ISO 177:2017-05 Plastics - Determination of migration of plasticizers (ISO 177:2016); German version EN ISO 177:2017
DIN EN ISO 3262-14:2022-10 Extenders - Specifications and methods of test - Part 14: Cristobalite (ISO/DIS 3262-14:2022); German and English version prEN ISO 3262-14:2022 / Note: Date of issue 2022-09-09*Intended as replacement for DIN EN ISO 3262-14 (2000-08).
DIN EN 14469-2:2004-08 Pigments and extenders - Testing of colouring materials in plasticized polyvinyl chloride (PVC-P) - Part 2: Preparation of test specimens; German version EN 14469-2:2004
DIN ISO 8402 A1 E:1989-10 Quality Terminology Supplement 1
DIN EN ISO 3262-16:2022-10 Extenders - Specifications and methods of test - Part 16: Aluminium hydroxides (ISO/DIS 3262-16:2022); German and English version prEN ISO 3262-16:2022 / Note: Date of issue 2022-09-09*Intended as replacement for DIN EN ISO 3262-16 (2000-10).
DIN 55608:2021-03 Pigments and extenders - Determination of water absorption value
DIN EN ISO 3262-9:2022-10 Extenders - Specifications and methods of test - Part 9: Calcined clay (ISO/DIS 3262-9:2022); German and English version prEN ISO 3262-9:2022 / Note: Date of issue 2022-09-09*Intended as replacement for DIN EN ISO 3262-9 (1998-08).
DIN 32878:1993-06 Angular displacement measuring systems with absolute and incremental encoders; concepts, requirements, testing
DIN EN ISO 3262-4:1998-09 Extenders for paints - Specifications and methods of test - Part 4: Whiting (ISO 3262-4:1998); German version EN ISO 3262-4:1998 / Note: To be replaced by DIN EN ISO 3262-4 (2022-10).
DIN 55625-4:1999-04 Extenders for plastics - Part 4: Whiting, specifications and methods of test
DIN EN ISO 3262-3:1998-09 Extenders for paints - Specifications and methods of test - Part 3: Blanc fixe (ISO 3262-3:1998); German version EN ISO 3262-3:1998 / Note: To be replaced by DIN EN ISO 3262-3 (2022-10).
DIN EN ISO 3262-8:2022-10 Extenders - Specifications and methods of test - Part 8: Natural clay (ISO/DIS 3262-8:2022); German and English version prEN ISO 3262-8:2022 / Note: Date of issue 2022-09-09*Intended as replacement for DIN EN ISO 3262-8 (1999-11).
DIN EN ISO 3262-7:1998-09 Extenders for paints - Specifications and methods of test - Part 7: Dolomite (ISO 3262-7:1998); German version EN ISO 3262-7:1998 / Note: To be replaced by DIN EN ISO 3262-7 (2022-10).
DIN EN ISO 3262-6:2023-03 Extenders - Specifications and methods of test - Part 6: Precipitated calcium carbonate (ISO 3262-6:2022); German version EN ISO 3262-6:2022
DIN 8061 E:2015-07 Unplasticized polyvinyl chloride (PVC-U) pipes - General quality requirements, testing
DIN EN ISO 3262-17:2023-03 Extenders - Specifications and methods of test - Part 17: Precipitated calcium silicate (ISO/DIS 3262-17:2023); German and English version prEN ISO 3262-17:2023 / Note: Date of issue 2023-02-17*Intended as replacement for DIN EN ISO 3262-17 (2000-10).
DIN 8061:1968 Unplasticized polyvinyl chloride (PVC-U) pipes - General quality requirements, testing
DIN 55625-7:1999-04 Extenders for plastics - Part 7: Dolomite, specifications and methods of test
DIN 55625-23:1999-12 Extenders for plastics - Part 23: Phlogopite; specifications and methods of test
DIN ISO 3451-3:1991-04 Plastics; determination of ash; unplasticized cellulose acetate; identical with ISO 3451-3:1984
DIN 8061:2016-05 Unplasticized polyvinyl chloride (PVC-U) pipes - General quality requirements, testing; Text in German and English
DIN 8061:2016 Unplasticized polyvinyl chloride (PVC-U) pipes - General quality requirements, testing; Text in German and English
DIN 8061 E:2008-07 Unplasticized polyvinyl chloride (PVC-U) pipes - General quality requirements, testing
DIN EN ISO 3262-14:2000-08 Extenders for paints - Specifications and methods of test - Part 14: Cristobalite (ISO 3262-14:2000); German version EN ISO 3262-14:2000 / Note: To be replaced by DIN EN ISO 3262-14 (2022-10).
DIN 53400:1988-06 Testing of plasticizers; determination of physical and chemical characteristics of plasticizers
DIN EN ISO 177:1999-10 Plastics - Determination of migration of plasticizers (ISO 177:1988)
DIN EN ISO 3262-18:2022-10 Extenders - Specifications and methods of test - Part 18: Precipitated sodium aluminium silicate (ISO/DIS 3262-18:2022); German and English version prEN ISO 3262-18:2022 / Note: Date of issue 2022-09-09*Intended as replacement for DIN EN ISO 3262-18 (2...
DIN EN ISO 3262-8:1999-11 Extenders for paints - Specifications and methods of test - Part 8: Natural clay (ISO 3262-8:1999); German version EN ISO 3262-8:1999 / Note: To be replaced by DIN EN ISO 3262-8 (2022-10).
DIN EN ISO 3344:1997-08 Reinforcement products - Determination of moisture content (ISO 3344:1997); German version EN ISO 3344:1997
DIN 32937-2:2000-04 The informal translation is actually "Control Measurement and Test Equipment Pressure Measurement Technology"
DIN EN ISO 3262-12:2023-01 Extenders - Specifications and methods of test - Part 12: Muscovite-type mica (ISO/DIS 3262-12:2023); German and English version prEN ISO 3262-12:2023 / Note: Date of issue 2022-12-02*Intended as replacement for DIN EN ISO 3262-12 (2002-04).
DIN 53405:1962 Testing plasticizers in plastics to determine migration of plasticizers from plasticized plastics
DIN 53780:2014-05 Pigments and extenders - Determination of matter soluble in water - Hexavalent chromium content
DIN 55625-24:1999-12 Extenders for plastics - Part 24: Magnesium hydroxide; specifications and methods of test
DIN SPEC 17071:2019-12 Additive manufacturing – Requirements for quality-assured processes at additive manufacturing centres
DIN 32878:1993 Angular displacement measuring systems with absolute and incremental encoders; concepts, requirements, testing
DIN EN ISO 3262-1 E:2019-08 Specifications and test methods for extenders Part 1: Introduction and general test methods (draft)
DIN EN ISO 3262-14:2023 Extenders - Specifications and methods of test - Part 14: Cristobalite (ISO 3262-14:2023)
DIN EN ISO 3262-15:2022-10 Extenders - Specifications and methods of test - Part 15: Vitreous silica (ISO/DIS 3262-15:2022); German and English version prEN ISO 3262-15:2022 / Note: Date of issue 2022-09-09*Intended as replacement for DIN EN ISO 3262-15 (2000-08).
DIN EN ISO 3262-5:2022-10 Extenders - Specifications and methods of test - Part 5: Natural crystalline calcium carbonate (ISO/DIS 3262-5:2022); German and English version prEN ISO 3262-5:2022 / Note: Date of issue 2022-09-09*Intended as replacement for DIN EN ISO 3262-5 (1998-09).
DIN EN ISO 3262-9:2023 Extenders - Specifications and methods of test - Part 9: Calcined clay (ISO 3262-9:2023)
DIN 53780 E:2013 Draft Document - Pigments and extenders - Determination of matter soluble in water - Hexavalent chromium content
DIN EN ISO 3262-19 E:2020-02 Extender Specifications and Test Methods Part 19: Precipitated Silica (Draft)
DIN EN 62343-5-1:2015-09 Dynamic modules - Part 5-1: Test methods - Dynamic gain tilt equalizer - Gain tilt settling time measurement (IEC 62343-5-1:2014); German version EN 62343-5-1:2015 / Note: DIN EN 62343-5-1 (2010-05) remains valid alongside this standard until 2017-12-30.
DIN 53770-13:2007-09 Pigments and extenders - Determination of matter soluble in hydrochloric acid - Part 13: Mercury content
DIN EN ISO 3262-1:2020 Extenders - Specifications and methods of test - Part 1: Introduction and general test methods (ISO 3262-1:2020)
DIN EN ISO 3262-2:2022-10 Extenders - Specifications and methods of test - Part 2: Barytes (natural barium sulfate) (ISO/DIS 3262-2:2022); German and English version prEN ISO 3262-2:2022 / Note: Date of issue 2022-09-09*Intended as replacement for DIN EN ISO 3262-2 (1998-09).
DIN 55625-6:1999-04 Extenders for plastics - Part 6: Precipitated calcium carbonate (PCC), specifications and methods of test
DIN EN ISO 3262-8:2023 Extenders - Specifications and methods of test - Part 8: Natural clay (ISO 3262-8:2023)

Association Francaise de Normalisation

NF T51-356*NF EN ISO 585:1999 Plastics. Unplasticized cellulose acetate. Determination of moisture content.
NF X50-180:1999 Quality management - contribution defaults - Defaults connected to non-quality of work in the creation and use of add-value
NF EN 14469-2:2004 Pigments and fillers - Testing of coloring materials in plasticized polyvinyl chloride (PVC-P) - Part 2: preparation of test specimens
NF T51-025*NF EN ISO 177:2017 Plastics - Determination of migration of plasticizers
NF T25-022*NF EN ISO 3344:1997 Reinforcement yarns. Determination of moisture content.
NF EN ISO 177:2017 Plastics - Determination of plasticizer migration
NF EN 60811-407:2012 Electrical and fiber optic cables - Test methods for non-metallic materials - Part 407: miscellaneous tests - Measurement of the increase in mass of polyethylene and polypropylene blends
NF C32-011-407*NF EN 60811-407:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 407 : miscellaneous tests - Measurement of mass increase of polyethylene and polypropylene compounds
NF E86-022:1989 Not pressurized vertical tanks. Capacity up to 70 cubic meters.
NF T31-116-19*NF EN ISO 3262-19:2021 Extenders - Specifications and methods of test - Part 19 : precipitated silica
NF EN ISO 3262-3:1998 Fillers for paints - Specifications and test methods - Part 3: fixed white
NF T57-603:2011 Fiber reinforced plastics - Prepreg - Determination of the conventional resin flow rate parallel to the folds.
NF A03-404:1991 Metal products - Practice of fatigue crack growth rate testing
NF T31-117-20*NF EN ISO 3262-20:2021 Extenders - Specifications and methods of test - Part 20 : fumed silica
NF EN ISO 3262-9:1998 Fillers for paints - Specifications and test methods - Part 9: calcined kaolin
NF S97-103/IN2*NF EN 1060-3/IN2:2010 Non-invasive sphygmomanometers - Part 3 : supplementary requirements for electro-mechanical blood pressure measuring systems.
T36-003:1988 Pigments. Dictionnary of pigments and extenders.
NF EN 62343-5-1:2015 Dynamic modules - Part 5-1: Test methods - Dynamic gain switch equalizer - Measurement of gain switch establishment time

Finnish Standards Institute

SFS-ISO 585 E:1986 This standard is approved in English

International Organization for Standardization (ISO)

ISO 585:1982 Plastics - Non-plasticized cellulose acetate - Determination of moisture content
ISO 3344:1997 Reinforcement products - Determination of moisture content
ISO 20427:2023 Pigments and extenders
ISO 1344:1997 Reinforcement products — Determination of moisture content
ISO 3262-14:2023 Extenders — Specifications and methods of test — Part 14: Cristobalite
ISO 3262-16:2023 Extenders — Specifications and methods of test — Part 16: Aluminium hydroxides
ISO 3262-13:2023 Extenders for paints. Specifications and methods of test - Natural quartz (ground)
ISO 3262-8:2023 Extenders — Specifications and methods of test — Part 8: Natural clay
ISO/PRF 3262-4 Extenders — Specifications and methods of test — Part 4: Whiting
ISO/PRF 3262-3 Extenders — Specifications and methods of test — Part 3: Blanc fixe
ISO 3262-15:2023 Extenders — Specifications and methods of test — Part 15: Vitreous silica
ISO 3262-22:2023 Extenders — Specifications and methods of test — Part 22: Flux-calcined kieselguhr
ISO 3081:1986 Iron ores; Increment sampling; Manual method
ISO/DIS 20427:2023 Pigments and extenders — Dispersion procedure for sedimentational particle sizing of suspended pigment or extender with liquid sedimentation methods
ISO 3262-2:2023 Extenders — Specifications and methods of test — Part 2: Baryte (natural barium sulfate)
ISO 11111-7:2005/Amd.1:2009 Textile machinery — Safety requirements — Part 7: Dyeing and finishing machinery AMENDMENT 1

American Society for Testing and Materials (ASTM)

ASTM F730-81(1990)e1 Leakage test method (weight gain method)
ASTM E647-08e1 Standard Test Method for Measurement of Fatigue Crack Growth Rates
ASTM E647-12 Standard Test Method for Measurement of Fatigue Crack Growth Rates
ASTM E647-95 Standard Test Method for Measurement of Fatigue Crack Growth Rates
ASTM E647-11 Standard Test Method for Measurement of Fatigue Crack Growth Rates
ASTM E647-05 Standard Test Method for Measurement of Fatigue Crack Growth Rates
ASTM E647-15e1 Standard Test Method for Measurement of Fatigue Crack Growth Rates
ASTM E647-99 Standard Test Method for Measurement of Fatigue Crack Growth Rates
ASTM RR-D08-1015 2010 D7635-Standard Test Method for Measurement of Thickness of Coatings Over Fabric Reinforcement
ASTM E647-13 Standard Test Method for Measurement of Fatigue Crack Growth Rates
ASTM E647-13e1 Standard Test Method for Measurement of Fatigue Crack Growth Rates
ASTM D7613-10 Standard Specification for Flexible Polypropylene Reinforced (fPP-R) and Nonreinforced (fPP) Geomembranes
ASTM D790-15e1 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
ASTM D6524/D6524M-16 Standard Test Method for Measuring the Resiliency of Turf Reinforcement Mats (TRMs)
ASTM D6524-00 Standard Test Method for Measuring the Resiliency of Turf Reinforcement Mats (TRMs)
ASTM D2288-97(2001) Standard Test Method for Weight Loss of Plasticizers on Heating
ASTM D6524-00(2011) Standard Test Method for Measuring the Resiliency of Turf Reinforcement Mats (TRMs)
ASTM D228-08 Standard Test Methods for Sampling, Testing, and Analysis of Asphalt Roll Roofing, Cap Sheets, and Shingles Used in Roofing and Waterproofing
ASTM D2288-97 Standard Test Method for Weight Loss of Plasticizers on Heating
ASTM D6524/D6524M-16(2021) Standard Test Method for Measuring the Resiliency of Turf Reinforcement Mats (TRMs)
ASTM D790-02 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
ASTM D790-00 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
ASTM D6693/D6693M-04(2015)e1 Standard Test Method for Determining Tensile Properties of Nonreinforced Polyethylene and Nonreinforced Flexible Polypropylene Geomembranes
ASTM D6693/D6693M-20(2024) Standard Test Method for Determining Tensile Properties of Nonreinforced Polyethylene and Nonreinforced Flexible Polypropylene Geomembranes
ASTM F1624-12(2024) Standard Test Method for Measurement of Hydrogen Embrittlement Threshold in Steel by the Incremental Step Loading Technique
ASTM D6693-04(2010) Standard Test Method for Determining Tensile Properties of Nonreinforced Polyethylene and Nonreinforced Flexible Polypropylene Geomembranes
ASTM D6693/D6693M-20 Standard Test Method for Determining Tensile Properties of Nonreinforced Polyethylene and Nonreinforced Flexible Polypropylene Geomembranes
ASTM D6693-04 Standard Test Method for Determining Tensile Properties of Nonreinforced Polyethylene and Nonreinforced Flexible Polypropylene Geomembranes
ASTM D6693-03 Standard Test Method for Determining Tensile Properties of Nonreinforced Polyethylene and Nonreinforced Flexible Polypropylene Geomembranes
ASTM D6693-01 Standard Test Method for Determining Tensile Properties of Nonreinforced Polyethylene and Nonreinforced Flexible Polypropylene Geomembranes
ASTM D1045-08 Standard Test Methods for Sampling and Testing Plasticizers Used in Plastics
ASTM D7635/D7635M-18(2024) Standard Test Method for Measurement of Thickness of Coatings Over Fabric Reinforcement
ASTM D1045-14 Standard Test Methods for Sampling and Testing Plasticizers Used in Plastics
ASTM E1457-07e2 Standard Test Method for Measurement of Creep Crack Growth Times in Metals
ASTM E1457-13 Standard Test Method for Measurement of Creep Crack Growth Times and Rates in Metals
ASTM D2734-16 Standard Test Methods for Void Content of Reinforced Plastics
ASTM D2734-94(2003) Standard Test Methods for Void Content of Reinforced Plastics
ASTM D2734-94 Standard Test Methods for Void Content of Reinforced Plastics
ASTM F1624-09 Standard Test Method for Measurement of Hydrogen Embrittlement Threshold in Steel by the Incremental Step Loading Technique
ASTM D2734-09 Standard Test Methods for Void Content of Reinforced Plastics
ASTM F528-99 Standard Test Method of Measurement of Common-Emitter D-C Current Gain of Junction Transistors
ASTM F1624-06 Standard Test Method for Measurement of Hydrogen Embrittlement Threshold in Steel by the Incremental Step Loading Technique
ASTM F528-99(2005) Standard Test Method of Measurement of Common-Emitter D-C Current Gain of Junction Transistors
ASTM F1624-12 Standard Test Method for Measurement of Hydrogen Embrittlement Threshold in Steel by the Incremental Step Loading Technique
ASTM D6566-12 Standard Test Method for Measuring Mass per Unit Area of Turf Reinforcement Mats
ASTM D790-07e1 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
ASTM F1624-00 Standard Test Method for Measurement of Hydrogen Embrittlement Threshold in Steel by the Incremental Step Loading Technique
ASTM F632-90 Test Method for Measuring High Frequency Small Signal Common Emitter Current Gain of Transistor
ASTM D2435/D2435M-11(2020) Standard Test Methods for One-Dimensional Consolidation Properties of Soils Using Incremental Loading
ASTM D2435/D2435M-25 Standard Test Methods for One-Dimensional Consolidation Properties of Soils Using Incremental Loading
ASTM D2199-03 Standard Test Method for Measurement of Plasticizer Migration From Vinyl Fabrics to Lacquers

British Standards Institution (BSI)

BS EN ISO 585:1999 Plastics - Unplasticized cellulose acetate - Determination of moisture content
BS EN ISO 585:1991 Plastics. Unplasticized cellulose acetate. Determination of moisture content
BS EN 60811-407:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Miscellaneous tests. Measurement of mass increase of polyethylene and polypropylene compounds
BS EN ISO 3344:1997(2000) Reinforcement products — Determination of moisture content
BS EN ISO 177:2017 Plastics. Determination of migration of plasticizers
BS 2782-10 Method 1002:1977 Methods of testing plastics. Glass reinforced plastics. Determination of loss on ignition
BS EN ISO 3344:1997 Reinforcement products - Determination of moisture content
BS EN ISO 3262-6:2022 Extenders for paints. Specifications and methods of test. Precipitated calcium carbonate
BS EN 62343-5-1:2015 Dynamic modules. Test methods. Dynamic gain tilt equalizer. Gain tilt settling time measurement
BS EN ISO 3262-14:2023 Extenders — Specifications and methods of test Part 14 : Cristobalite
BS EN ISO 787-5:1995 General methods of test for pigments and extenders. Determination of oil absorption value
BS EN ISO 3262-3:1998(1999) Extenders for paints — Specifications and methods of test — Part 3 : Blanc fixe
BS EN ISO 3262-9:2023 Extenders — Specifications and methods of test Part 9 : Calcined clay
BS EN ISO 3262-4:1998(1999) Extenders for paints — Specifications and methods of test — Part 4 : Whiting
BS EN ISO 787-1:2017 General methods of test for pigments and extenders. Comparison of colour of pigments
BS EN 14488-7:2006 Testing sprayed concrete - Fibre content of fibre reinforced concrete
BS EN ISO 3262-7:1998(1999) Extenders for paints — Specifications and methods of test — Part 7 : Dolomite
BS 6057-3.17:1990 Rubber latices - Methods of test - Determination of bound styrene content of non-reinforced styrene butadiene rubber latices
09/30192990 DC BS EN 60811-407. Electric and optical fibre cables. Test methods for non-metallic materials. Part 407. Environmental tests. Measurement of mass increase of polyethylene and polypropylene compounds
BS 6057 Sec.3.17:1990 Rubber latices. Methods of test. Determination of bound styrene content of non-reinforced styrene butadiene rubber latices
BS EN ISO 787-10:1995 General methods of test for pigments and extenders. Determination of density. Pyknometer method
BS EN ISO 787-9:2019 General methods of test for pigments and extenders. Determination of pH value of an aqueous suspension
BS EN ISO 787-14:2019 General methods of test for pigments and extenders. Determination of resistivity of aqueous extract
BS EN ISO 787-22:2017 General methods of test for pigments and extenders. Comparison of resistance to bleeding of pigments
PD CEN ISO/ASTM TR 52952:2023 Additive manufacturing of metals. Feedstock materials. Correlating of rotating drum measurement with powder spreadability in PBF-LB machines
BS EN 62059-31-1:2009 Electricity metering equipment - Dependability - Accelerated reliability testing - Elevated temperature and humidity
BS EN ISO 3262-13:1998(1999) Extenders for paints — Specifications and methods of test — Part 13 : Natural quartz (ground)
BS EN 62059-31-1:2008 Electricity metering equipment - Dependability - Accelerated reliability testing - Elevated temperature and humidity

Ente Nazionale Italiano di Unificazione

UNI/TS 11978:2025 Light and lighting - Calculation of the fTI increment generated by light sources that are not part of the road lighting system
UNI EN ISO 7622-1:2013 Steel cord conveyor belts - Longitudinal traction test - Part 1: Measurement of elongation
UNI EN 60:1977 Glass reinforced plastics. Determination of the loss on ignition.
UNI 10236-4:1993 Test for cylindrical head multiple diamond dressers, with a bond non containing carbides. Wheel dressing. Requirements
UNI EN ISO 17892-5:2017 Geotechnical investigation and testing - Laboratory testing of soil - Part 5: Incremental loading oedometer test
UNI EN ISO 3344:1998 Reinforcement products - Determination of moisture content
UNI EN ISO 3262-19:2021 Extenders - Specifications and methods of test - Part 19: Precipitated silica
UNI 5644-1965 Plastic material testing. Determination of moisture content of unplasticized cellulose acetate
UNI EN ISO 3262-20:2021 Extenders - Specifications and methods of test - Part 20: Fumed silica
UNI 8039-2:1979 Textile glass. Mats for reinforcement of plastics. Test methods. Determination of mass per unit area.

GCC Standardization Organization

GSO IEC 60811-407:2014 Electric and optical fibre cables - Test methods for non-metallic materials - Part 407: Miscellaneous tests - Measurement of mass increase of polyethylene and polypropylene compounds
BH GSO ISO 177:2024 Plastics — Determination of migration of plasticizers
OS GSO ISO 177:2024 Plastics — Determination of migration of plasticizers
GSO ASTM D790:2016 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
GSO ISO 3262-16:2014 Extenders for paints -- Specifications and methods of test -- Part 16: Aluminium hydroxides
GSO IEC 60306-4:2014 Measurement of photosensitive devices. Part 4: Methods of measurement for photo-multipliers
GSO ISO/TS 17892-5:2013 Geotechnical investigation and testing -- Laboratory testing of soil -- Part 5: Incremental loading oedometer test
OS GSO EN 1170-2:2024 Precast concrete products - Test method for glass-fibre reinforced cement - Part 2: Measuring the fibre content in fresh GRC, "Wash out test"
GSO ASTM D2584:2016 Standard Test Method for Ignition Loss of Cured Reinforced Resins

Association for Electrical, Electronic & Information Technologies (VDE)

VDE 0472-809 DIN VDE 0472-809-1984*DIN 57472-809:1984 Testing of cables, wires and flexible cords; weight increase [VDE Specification]
VDE 0473-811-407-2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 407: Miscellaneous tests - Measurement of mass increase of polyethylene and polypropylene compounds (IEC 60811-407:2012); German version EN 60811-407:2012

US Federal Contractor Registration (USFCR)

FCR COE ETL 1110-2-536-1994 NONLINEAR INCREMENTAL STRUCTURAL ANALYSIS OF ZINTEL CANYON DAM
FCR COE ETL 1110-2-365-1994 NONLINEAR, INCREMENTAL STRUCTURAL ANALYSIS OF MASSIVE CONCRETE STRUCTURES

Swedish Institute for Standards

SIS SMS 1880-1967 Plastic pipes. Pressure pipes oj unplasticized PVC. Testing
SIS SMS 2528-1967 Pl astiv. pipes. Pipes and f ittings oj unplaslicized PVC for waste water. Testing
SS-EN 60811-407:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 407: Miscellaneous tests - Measurement of mass increase of polyethylene and polypropylene compounds
SS-EN 62343-5-1:2015 Dynamic modules - Part 5-1: Test methods - Dynamic gain tilt equalizer - Gain tilt setting time measurement
SIS SS-CECC 40104-1991 Blank detail specification: Fixed low power non-wirewound resistors of enhanced quality
SS-EN ISO 3344:1997 Reinforcement products - Determination of moisture content (ISO 3344:1997)
SS-EN 12697-53:2019 Bituminous mixtures - Test methods - Part 53: Cohesion increase by spreadability-meter method

International Telecommunication Union (ITU)

ITU-T MES-2 (1992) Amd. 1-1999 Additions to the Handbook on Telephonometry

Czech Standards Institute (UNMZ)

CSN 34 7190-1965 Measuring of dimensions and increments of strips. Conductors for winding.
CSN 46 7092-88-1998 Testing methods for feeding stuffs - Part 88: Determination of fortificate content of threonine
CSN ON 04 5548-1962 Nominal quantity increased from 40 to 1250

Bureau of Indian Standards

IS 17313-2019 Reinforcement Products — Determination of Moisture Content

Aeronautical Radio Inc.

ARINC 634 ITEM 5.0-1996 Transitions/Capacity Growth

Gosstandart of Russia

GOST 11612.8-1985 Photomultipliers. Measuring method of energy resolution
GOST 11612.13-1985 Photomultipliers. Method of measuring pulse response rise time and width
GOST 11612.4-1984 Photomultipliers. Measuring method of dark anode current
GOST 24204-1980 Decibel unit for measurement of levels loss and dain in wiring communications engineering
GOST 11612.15-1975 Photomultipliers. Measuring method of readiness time
GOST 11612.16-1975 Photomultipliers. Method of measuring cut-off voltage
GOST 25370-1982 Measuring photomultipliers. Basic parameters, measuring methods of basic parameters
GOST IEC 60811-407-2015 Electric and optical fibre cables. Test methods for non-metallic materials. Part 407. Miscellaneous tests. Measurement of mass increase of polyethylene and polypropylene compounds
GOST 11612.12-1984 Photomultipliers. Measuring method of energetic equivalent of intrinsic noise
GOST ISO 1889-2013 Reinforcement yarns. Method of determination of linear density
GOST 11612.11-1985 Photomultipliers. Measuring method of instability
GOST 11612.6-1983 Photomultipliers. Measuring methods of light equivalent of anode dark current noise
GOST 11612.5-1975 Photomultipliers. Method of measuring signal to "noise in signal" ratio
GOST 23698-1979 Camera lenses. Method for measurement of the lateral chromatic aberration
GOST R 57042-2016 Polymer composites. Method for determination of ignition loss mass of reinforced resins
GOST R 51901.16-2005 Risk management. Reliability growth. Statistical test and estimation methods

Korean Agency for Technology and Standards (KATS)

KS M ISO 177-2023 Plastics — Determination of migration of plasticizers
KS M ISO 177-2018(2023) Plastics — Determination of migration of plasticizers
KS E ISO 6153-2018(2023) Chromium ores－Increment sampling
KS L ISO 3374-2003(2018) Reinforcement products－Mat and fabics－Determination of mass per unit area
KS E ISO 6153-2018 Chromium ores－Increment sampling
KS E ISO 6153-2023 Chromium ores－Increment sampling
KS E ISO 6153:2018 Chromium ores－Increment sampling
KS K 0738-2007(2012) Test method for plasticizer mixtures of polyvinyl chloride coated fabrics
KS C IEC 60811-407-2016(2021) Electric and optical fibre cables ― Test methods for non-metallic materials ― Part 407: Miscellaneous tests ― Measurement of mass increase of polyethylene and polypropylene compounds
KS C IEC 60811-407-2016 Electric and optical fibre cables ― Test methods for non-metallic materials ― Part 407: Miscellaneous tests ― Measurement of mass increase of polyethylene and polypropylene compounds
KS C IEC 60811-407-2021 Electric and optical fibre cables ― Test methods for non-metallic materials ― Part 407: Miscellaneous tests ― Measurement of mass increase of polyethylene and polypropylene compounds
KS C IEC 60811-407:2016 Electric and optical fibre cables ― Test methods for non-metallic materials ― Part 407: Miscellaneous tests ― Measurement of mass increase of polyethylene and polypropylene compounds
KS F 2316-2017 Test method for one－dimensional consolidation properties of soils using incremental loading
KS E 3034-2009 Iron ores－Increment sampling－Manual method
KS F 2244-1990(2001) MEASURING METHOD FOR FIBER CONTENT OF GLASS FIBER REINFORCED PLASTICS
KS M ISO 3262-1-2020 Extenders for paints — Specifications and methods of test — Part 1: Introduction and general test methods
KS M 3707-2002 TESTING METHODS FOR CARBON FIBER CONTENT AND VOID CONTENT OF CARBON FIBER REINFORCED PLASTICS

American Water Works Association (AWWA)

AWWA CONS51088 Public Participation Methods to Increase Non-Residential Conservation

Japanese Industrial Standards Committee (JISC)

JIS R 3913:2000 Reinforcement products -- Determination of moisture content
JIS K 7075:1991 Testing methods for carbon fiber content and void content of carbon fiber reinforced plastics

Danish Standards Foundation

DS/EN ISO 177:1999 Plastics - Determination of migration of plasticizers
DANSK DS/EN ISO 3344:1997 Reinforcement products - Determination of moisture content
DS/EN ISO 3344:1997 Reinforcement products - Determination of moisture content
DANSK DS/EN 62343-5-1:2015 Dynamic modules - Part 5-1: Test methods - Dynamic gain tilt equalizer - Gain tilt settling time measurement
DS/EN ISO 3262-4:1999 Extenders for paints - Specifications and methods of test - Part 4: Whiting
DANSK DS/EN ISO 3262-4:1998 Extenders for paints – Specifications and methods of test – Part 4: Whiting
DANSK DS/EN ISO 3262-14:2000 Extenders for paints - Specifications and methods of test - Part 14: Cristobalite
DANSK DS/EN ISO 3262-7:1998 Extenders for paints – Specifications and methods of test – Part 7: Dolomite
DS/EN ISO 3262-14:2000 Extenders for paints - Specifications and methods of test - Part 14: Cristobalite
DANSK DS/EN ISO 177:2017 Plastics – Determination of migration of plasticizers (ISO 177:2016)
DANSK DS/EN 60811-407:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 407: Miscellaneous tests - Measurement of mass increase of polyethylene and polypropylene compounds
DS/EN ISO 3262-16:2000 Extenders for paints - Specifications and methods of test - Part 16: Aluminium hydroxides
DANSK DS/EN ISO 3262-8:1999 Extenders for paints – Specifications and methods of test – Part 8: Natural clay
DANSK DS/EN ISO 3262-16:2000 Extenders for paints – Specifications and methods of test – Part 16: Aluminium hydroxides
DANSK DS/ISO 3262-19:2021 Extenders – Specifications and methods of test – Part 19: Precipitated silica
DS/EN 60811-407:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 407: Miscellaneous tests - Measurement of mass increase of polyethylene and polypropylene compounds
DANSK DS/ISO 3262-20:2021 Extenders – Specifications and methods of test – Part 20: Fumed silica
DANSK DS/EN 14469-4:2004 Pigments and extenders - Testing of colouring materials in plasticized polyvinyl chloride (PVC-P) - Part 4: Determination of bleeding of colouring materials
DS/EN ISO 3262-1:1998 Extenders for paints - Specifications and methods of test - Part 1: Introduction and general test methods
DS/EN 14469-2:2004 Pigments and extenders - Testing of colouring materials in plasticized polyvinyl chloride (PVC-P) - Part 2: Preparation of test specimens
DS/EN ISO 176:2005 Plastics - Determination of loss of plasticizers - Activated carbon method
DS/EN ISO 3262-17:2000 Extenders for paints - Specifications and methods of test - Part 17: Precipitated calcium silicate
DANSK DS/EN ISO 3262-6:1998 Extenders for paints – Specifications and methods of test – Part 6: Precipitated calcium carbonate
DANSK DS/EN ISO 3262-18:2000 Extenders for paints - Specifications and methods of test - Part 18: Precipitated sodium aluminium silicate
DANSK DS/EN 665:1994 Resilient floor coverings - Determination of exudation of plasticizers
DANSK DS/EN ISO 3262-12:2001 Extenders for paints – Specifications and methods of test – Part 12: Muscovite-type mica
DS/EN ISO 3262-13:1998 Extenders for paints - Specifications and methods of test - Part 13: Natural quartz (ground)
DS/EN ISO 3262-18:2000 Extenders for paints - Specifications and methods of test - Part 18: Precipitated sodium aluminium silicate

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO ASTM D790:2017 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
BH GSO ISO 3262-4:2015 Extenders for paints -- Specifications and methods of test -- Part 4: Whiting
BH GSO IEC 60306-4:2016 Measurement of photosensitive devices. Part 4: Methods of measurement for photo-multipliers
BH GSO IEC 60811-407:2015 Electric and optical fibre cables - Test methods for non-metallic materials - Part 407: Miscellaneous tests - Measurement of mass increase of polyethylene and polypropylene compounds
BH GSO ISO 176:2016 Plastics -- Determination of loss of plasticizers -- Activated carbon method
BH GSO ASTM D2584:2017 Standard Test Method for Ignition Loss of Cured Reinforced Resins
BH GSO ISO 3262-13:2015 Extenders for paints -- Specifications and methods of test -- Part 13: Natural quartz (ground)

Standards Norway

NS 9502:1985 Plastics — Determination of migration of plasticizers
NS-EN ISO 177:2017 Plastics — Determination of migration of plasticizers (ISO 177:2016)
NS-EN ISO 3344:1997 Reinforcement products — Determination of moisture content (ISO 3344:1997)

The Directorate General of Specifications and Metrology (DGSM)

OS GSO ASTM D790:2016 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
OS GSO ISO 3262-4:2014 Extenders for paints -- Specifications and methods of test -- Part 4: Whiting
OS GSO IEC 60811-407:2014 Electric and optical fibre cables - Test methods for non-metallic materials - Part 407: Miscellaneous tests - Measurement of mass increase of polyethylene and polypropylene compounds
OS GSO IEC 60306-4:2014 Measurement of photosensitive devices. Part 4: Methods of measurement for photo-multipliers
OS GSO ISO 176:2015 Plastics -- Determination of loss of plasticizers -- Activated carbon method
OS GSO ASTM D2584:2016 Standard Test Method for Ignition Loss of Cured Reinforced Resins
OS GSO ISO 3262-13:2014 Extenders for paints -- Specifications and methods of test -- Part 13: Natural quartz (ground)

American National Standards Institute （ANSI)

ANSI/ASTM D2288:2001 Test Method for Weight Loss of Plasticizers on Heating (X-15-373-1) (08.02)
ANSI/ATIS 0100005-2006 Auditory Non-Intrusive Quality Estimation Plus (ANIQUE+): Perceptual Model for Non-Intrusive Estimation of Narrowband Speech Quality
ANSI/IEEE Std 206-1960(R1978) TV: Measurement of differential gain and differential phase
ANSI/ASHRAE 203-2018(2021) Method of Test for Determining Heat Gain of Office Equipment Used in Buildings
ANSI/ANS 8.6-1983 Safety in Conducting Subcritical Neutron-Multiplication Measurements in situ
ANSI/ANS 8.6-1983(2022) Safety in Conducting Subcritical Neutron-Multiplication Measurements in situ

Spanish Association for Standardization (UNE)

AENOR UNE-EN 14469-2:2004 Pigments and extenders - Testing of coloring materials in plasticized polyvinyl chloride (PVC-P) - Part 2: Preparation of test specimens
UNE-EN 62343-5-1:2015 Dynamic modules - Part 5-1: Test methods - Dynamic gain tilt equalizer - Gain tilt settling time measurement (Endorsed by AENOR in April of 2015.)
UNE-EN ISO 177:2001 PLASTICS - DETERMINATION OF MIGRATION OF PLASTICIZERS. (ISO 177:1988)
UNE-EN ISO 3262-19:2022 Extenders - Specifications and methods of test - Part 19: Precipitated silica (ISO 3262-19:2021)
UNE-EN 60811-407:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 407: Miscellaneous tests - Measurement of mass increase of polyethylene and polypropylene compounds
UNE-EN ISO 177:2017 Plastics - Determination of migration of plasticizers (ISO 177:2016)
AENOR UNE-EN ISO 177:2017 Plastics. Determination of plasticizer migration. (ISO 177:2016).
UNE-EN ISO 3262-20:2022 Extenders - Specifications and methods of test - Part 20: Fumed silica (ISO 3262-20:2021)
AENOR UNE-EN 14469-4:2004 Pigments and extenders - Testing of coloring materials in plasticized polyvinyl chloride (PVC-P) - Part 4: Determination of bleeding of coloring materials
UNE 20-575-1981 Measurement of changing factors in electro-optical image intensifiers
UNE-EN ISO 3262-14:2024 Extenders - Specifications and methods of test - Part 14: Cristobalite (ISO 3262-14:2023)
UNE-EN 14469-2:2004 Pigments and extenders - Testing of colouring materials in plasticized polyvinyl chloride (PVC-P) - Part 2: Preparation of test specimens
UNE-EN ISO 3262-9:2024 Extenders - Specifications and methods of test - Part 9: Calcined clay (ISO 3262-9:2023)
UNE-EN ISO 17892-5:2019 Geotechnical investigation and testing - Laboratory testing of soil - Part 5: Incremental loading oedometer test (ISO 17892-5:2017)
AENOR UNE-EN 665:1995 Resilient floor coverings - Determination of exudation of plasticizers
AENOR UNE-EN ISO 3262-4:1999 Extenders for paints - Specifications and methods of test - Part 4: Whiting (ISO 3262-4:1998)
AENOR UNE-EN ISO 3262-3:1999 Extenders for paints - Specifications and methods of test - Part 3: Blanc fixe (ISO 3262-3:1998)
UNE-EN 14488-5:2007 Testing sprayed concrete - Part 5: Determination of energy absorption capacity of fibre reinforced slab specimens
UNE-EN 14469-4:2004 Pigments and extenders - Testing of colouring materials in plasticized polyvinyl chloride (PVC-P) - Part 4: Determination of bleeding of colouring materials

Standard Association of Australia （SAA）

AS 3572.3:1989 Plastics - Glass filament reinforced plastics (GRP) - Methods of test, Method 3: Determination of loss on ignition of glass filament reinforced plastics
AS 1441.8:1973 Methods of test for coated fabrics, Method 8: Determination of plasticizer evaporation
AS 2798:1985 Paints and related materials - Extenders
AS 3572.7:1989 Plastics - Glass filament reinforced plastics (GRP) - Methods of test, Method 7: Determination of extension to failure of unreinforced resins
AS 3572.6:1989 Plastics - Glass filament reinforced plastics (GRP) - Methods of test, Method 6: Determination of hoop tensile modulus of elasticity of wound glass filament reinforced plastics pipes

American Concrete Institute

ACI 544.2R-89(R2009) Measurement of Properties of Fiber Reinforced Concrete
ACI 544.2R-1989 Measurement of Properties of Fiber Reinforced Concrete

International Electrotechnical Commission (IEC)

IEC 60811-407:2012 Electric and optical fibre cables – Test methods for non-metallic materials – Part 407: Miscellaneous tests – Measurement of mass increase of polyethylene and polypropylene compounds (Edition 1.0)
IEC 60306-4:1971 Measurement of photosensitive devices. Part 4 : Methods of measurement of photo multipliers
IEC 62343-5-1:2014 Dynamic modules - Part 5-1: Test methods - Dynamic gain tilt equalizer - Gain tilt settling time measurement

Internet Engineering Task Force (IETF)

RFC 3229-2002 Delta encoding in HTTP
RFC 1995-1996 Incremental Zone Transfer in DNS
RFC 8182-2017 The RPKI Repository Delta Protocol (RRDP)

European Committee for Standardization (CEN)

EN ISO 3262-16:2023 Extenders - Specifications and methods of test - Part 16: Aluminium hydroxides (ISO 3262-16:2023)
EN ISO 3262-8:2023 Extenders - Specifications and methods of test - Part 8: Natural clay (ISO 3262-8:2023)
EN ISO 3344:1997 Reinforcement Products - Determination of Moisture Content ISO 3344: 1997
EN ISO 3262-15:2023 Extenders - Specifications and methods of test - Part 15: Vitreous silica (ISO 3262-15:2023)
EN 1170-3:1997 Precast concrete products - Test method for glass-fibre reinforced cement - Part 3: Measuring the fibre content of sprayed GRC
EN ISO 3262-14:2023 Extenders - Specifications and methods of test - Part 14: Cristobalite (ISO 3262-14:2023)
EN ISO 177:2017 Plastics - Determination of migration of plasticizers
FprEN ISO 3262-7 Extenders - Specifications and methods of test - Part 7: Dolomite (ISO/FDIS 3262-7:2023)
FprEN ISO 3262-14 Extenders - Specifications and methods of test - Part 14: Cristobalite (ISO/FDIS 3262-14:2023)

Comitato Elettrotecnico Italiano

CEI EN 62343-5-1:2015 Dynamic modules Part 5-1: Test methods - Dynamic gain tilt equalizer - Gain tilt settling time measurement
CEI EN 60811-407:2014 Electric and optical fibre cables - Test methods for non-metallic materials Part 407: Miscellaneous tests - Measurement of mass increase of polyethylene and polypropylene compounds

Yugoslav Association for Standardization

JUS U.A9.011-1985 Modular coordination. Sub-modular increments

Swiss Association for Standardization (SNV)

VSM 10853-1943 Thermoplastic pipes. Non-plasticized polyvinyl chloride (PVC) pipes and fittings. Quality requirements

European Committee for Electrotechnical Standardization（CENELEC）

EN 60811-407:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 407: Miscellaneous tests - Measurement of mass increase of polyethylene and polypropylene compounds

National Standardisation Body (ASRO)

STAS 11410-1980 CONNECTING PIECES OF NON-PLASTICIZED POLYVINYL CHLORIDE FOR DRAINAGEGeneral technical requirements for quality

Lithuanian Standards Office

LST EN ISO 3344:2001 Reinforcement products - Determination of moisture content (ISO 3344:1997)
LST EN 14469-2-2004 Pigments and extenders - Testing of colouring materials in plasticized polyvinyl chloride (PVC-P) - Part 2: Preparation of test specimens
LST EN ISO 3262-4:2002 Extenders for paints - Specifications and methods of test - Part 4: Whiting (ISO 3262-4:1998)
LST EN 14469-4-2004 Pigments and extenders - Testing of colouring materials in plasticized polyvinyl chloride (PVC-P) - Part 4: Determination of bleeding of colouring materials

National Electrical Manufacturers Association（NEMA)

NEMA XR 17-1993 Test Standard for the Measurement of the Image Signal Uniformity of an X-Ray Image Intensifier System

Canadian General Standards Board （CGSB)

CGSB 3.522-2011-CAN/CGSB-2011 Carburant diesel contenant du biodiesel (B6朆20)

Indonesia Standards

SNI 01-2238-1991 Wood and non-wood, Test method for pectin
SNI 06-0782-1989 Kulit jadi, Cara uji ketahanan rekat antara lapisan plastik dan lapisan penguat
SNI IEC 60811-407:2012 Electric cables and optical fibre cables – Test methods for non-metallic materials – Part 407: General test – Measurement of mass increase of polyethylene and polypropylene components (IEC 60811-407:2012, IDT)

International Federation of Trucks and Engines

NAVISTAR CEMS DT-8-2004 Glass Content of Reinforced Plastics

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association

JEDEC EIA-306-1965(R1999) Measurement of Small Signal HF, VHF, and UHF Power Gain of Transistors

American Nuclear Society (ANS)

ANS 8.6-1983 Safety in conducting subcritical neutron-multiplication measurements in situ

Society of Automotive Engineers (SAE)

SAE J816-1962 ENGINE TEST CODE-NONTURBOCHARGED SPARK IGNITION AND DIESEL

Association of German Mechanical Engineers

VDI 3405 BLATT 7-2019 Additive Fertigungsverfahren - Gueteklassen fuer additiv gefertigte Kunststoffbauteile
VDI 3405 BLATT 7-2018 Additive Fertigungsverfahren - Gueteklassen fuer additiv gefertigte Kunststoffbauteile

Associação Brasileira de Normas Técnicas

ABNT MB-378-1969 Measurement of hydraulic cardboard descent after increased weight and swelling (welded material)

Polski Komitet Normalizacyjny (PKN)

PN C89401-1988 Plasticizers Methods of test

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE)

ASHRAE AT-01-10-3-2001 Test of Measured Solar Heat Gain Variation in a Fenestration and Shade Combination with Respect to Test Specimen Tilt

Others: Incremental testing vs. non-incremental